Big keys telephone
Big Button PhoneInstruction Manual
EASY TOREAD BIGBUTTONS
10 TWO TOUCHNUMBERMEMORY
ADJUSTABLEVOLUME
DESK/WALLMOUNTABLE
HANDS FREESPEAKERPHONE
If you need any help, please contact us at [email protected]
Big keys telephone
1
We are looking forward to serving you again in near future.
Thanks again for your support and time, dear.
Wish you and your family a wonderful day!
Dear Valued CustomerThanks very much for your business! We hope you're happy
with our products as well as our service.
If you have any problems (about products, refund or return),
please contact us first. We are always here for you and will
provide you the satisfactory solutions tolet you have a great
shopping experience.
Welcome To Contact Us Customer Service Email: [email protected]
We aim to provide the high quality products and the best
service to our valued customers. And we will be appreciate
if you can leave us your feedback to share your opinions on
our products.
If you need any help, please contact us at [email protected]
2
Big keys telephone
FEATURE LIST: - Hands-free Speakerphone with Volume Control - Handset Volume Control- Ringer Volume Control- 10-Two Touch Speed Dial Memories- Last Number Redial- In Use Indicator and Ringer Indicator- Flash Function- Hold on Music Function- Tole/Pulse Dial Mode Selectable- Desktop/Wall Mounting
LOCATION OF CONTROLS:1. AUTO Button 2. STORE Button 3. HOLD Button 4. SP-PHONE Volume 5. FLASH Button 6. REDIAL Button7. SP-PHONE Button 8. RINGER Indicator 9.RINGER Volume 10. HANDSET Volume 11. Tole/Pulse Control
If you need any help, please contact us at [email protected]
3
Big keys telephone
1. AUTO Button 2. STORE Button 3. HOLD Button 4. SP-PHONE Volume 5. FLASH Button 6. REDIAL Button7. SP-PHONE Button 8. RINGER Indicator 9.RINGER Volume 10. HANDSET Volume 11. Tole/Pulse Control
INSTALLATION1. Connect the coiled cord to handset and the telephone base.2. Connect the telephone wire to the telephonebase and wall jack.Please pick up the handset and you will hear the dial tone, that means the phone is ready for use. If not, please re-connect the phone line and make sure they are inserted in the correct jack. Please Note: This phone is powered by the telephone line. It will work after you complete the above 2 steps. No need any batteries or DC power. It still works when power outage in the house.
If you need any help, please contact us at [email protected]
RINGER VOLUME HI/LO SWITCHTo control the volume of the Ringer.
SP-PHONE VOLUME HI/LO SWITCH To control the volume of the handsfree speakerphone.
HANDSET VOLUME HI/LO SWITCHTo control the volume of the handset.
RINGER INDICATORLED will flash when a call comes in.
OPERATION
4
Big keys telephone
If you need any help, please contact us at [email protected]
IN USE INDICATORLed will be bright when the phone is in use.
RECEIVING A CALL1. Pick up the handset or press “SP-PHONE” button when the phone rings.2. When you finish the phone call, put the handset back on the phone base or press “SP-PHONE” button again.
MAKING A CALL1. Pick up the handset or press “SP-PHONE” button to hear a dialing tone.2. Dial the number you want to call.3. Hang up the handset or press “SP-PHONE” button again if you finish the conversation.
LAST NUMBER REDIAL FUNCTIONPick up the handset or press the “SP-PHONE” button, then press “REDIAL” button when you hear the dialing tone.
FLASH FUNCTIONIf you have subscribed to a call waiting service, the flash button replaces the hook allowing you to take the next call.
MUSIC ON HOLD
5
Big keys telephone
If you need any help, please contact us at [email protected]
1. When talking on the phone, press HOLD button once. The caller will hear the music from your phone set, and your phone set is in a holding state，put the handset back on the phone base .2. To continue the phone call, just pick up the handset or pressSP-PHONE button once again.
TO STORE PHONE NUMBERS FOR SPEED DIAL1. With the handset off the hook, press STORE button and then enter the phone number you want to store；2. Press STORE button and then press (0-9) button for number location；3. Replace the handset. When you have finished these steps, this phone number willhave been stored.
TO SPEED DIAL FROM STORED NUMBER1. Pick up handset (or press SP-PHONE button);2. Press AUTO and press the correct memory location (0-9)Then the telephone number will be automatically dialed out.
TOLE/PULSE DIAL MODE SELECTABLE1.“P” is the pulse dialing2.“T” is the dual tone multiple frequencydialingPlease Note: Because the most of the switchboard is dual tone multiple frequency dialing. So, please adjust the P/T button on the
Big keys telephone
6
If you need any help, please contact us at [email protected]
“T” side. If the phone doesn’t work on T side, please adjust P/T button on the “P” side
WALL MOUNTABLEWhen use it as wall-mounted, put the handset aside, slide the adjustable hook upwards to remove it from the slot. Rotate theadjustable hook by 180 degrees, then replace the adjustable hook into the slot until it locks into position. The handset will can stay on the phone base.
Remove the filled sponge from the Hanging hole on the bottom of the telephone base. Align the holes with the wall-mounting plate, then slide the telephone base down until it locks securely. Replace the handset in the telephone base.
Big keys telephone
7
IMPORTANT NOTESTelephone connectionsThe voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard EN60950). Following a power cut, the call in progress .
Safety precautions- Do not allow the handset to come into contact with liquids or moisture.- Do not open the handset or base unit. This could expose you to high voltages.- There is a slight chance that your product could be damaged by an electrical storm. We recommend that you unplug the product from the telephone socket during a storm.- Do not use the handset in an explosive hazard area such as where there is gas leaking.- It is recommended that this product is not used near intensive care medical equipments or by persons with pacemakers.- This product can interfere with electrical equipment such as answering machine, television, radio and computers if placed tooclose. We recommend that you position the base unit at least onemeter from suchappliances.
If you need any help, please contact us at [email protected]
557 说明书 105X165mm,128g双铜，正反面单黑印刷，8P(折叠成册)
IN USE INDICATORLed will be bright when the phone is in use.
RECEIVING A CALL1. Pick up the handset or press “SP-PHONE” button when the phone rings.2. When you finish the phone call, put the handset back on the phone base or press “SP-PHONE” button again.
MAKING A CALL1. Pick up the handset or press “SP-PHONE” button to hear a dialing tone.2. Dial the number you want to call.3. Hang up the handset or press “SP-PHONE” button again if you finish the conversation.
LAST NUMBER REDIAL FUNCTIONPick up the handset or press the “SP-PHONE” button, then press “REDIAL” button when you hear the dialing tone.
FLASH FUNCTIONIf you have subscribed to a call waiting service, the flash button replaces the hook allowing you to take the next call.
MUSIC ON HOLD
