+ All Categories
Home > Documents > Bijus (2)

Bijus (2)

Date post: 13-Dec-2014
Category:
Upload: bijouxnatu
View: 448 times
Download: 0 times
Share this document with a friend
Description:
 
3
120 Bead&Button | beadandbutton.com inspiration Tiffany A six-strand braid gives an interesting twist to strings of lentil and bugle beads designed by Sally Squire The combination of iridescent lentil and black bugle beads mimics a stained glass window. stepbystep [1] Attach a stop bead (Basics, p. 134) on 4 ft. (1.2m) of Power Pro, leaving a 6-in. (15cm) tail. [2] Pick up an 110 seed bead, a 7mm bugle bead, an 110, a 6mm color A lentil bead, an 110, a bugle, an 110, an A, an 110, and an A. Repeat this pattern until the strand measures 25 in. (64cm). End the strand with an A, an 110, a bugle, and an 110. At the end of the strand, string a stop bead with a hole large enough to accommodate a T-pin. [3] Repeat steps 1 and 2 twice. [4] Using 6mm color B lentils instead of As, repeat steps 1 and 2 three times with the following change: in step 2 pick up a repeating pattern of an 110, a bugle, an 110, a B, an 110, a B, an 110, a bugle, an Sally Squire began her professional design career in 1994. She first worked with glass beads and later expanded to other media. Her present focus is on polymer clay beads and design- ing fiber projects that feature her work. Visit Sally’s Web site, zillibeads.com, for more information, or e-mail her at [email protected]. BRAIDING
Transcript
Page 1: Bijus (2)

120 Bead&Button | beadandbutton.com

inspirationTiffany

A six-strandbraid gives aninteresting twist to strings of lentil and bugle beadsdesigned bySallySquire

The combination of iridescent lentil and black bugle beads mimics a stained glass window.

stepbystep

[1] Attach a stop bead (Basics, p. 134) on 4 ft. (1.2m) of Power Pro, leaving a 6-in. (15cm) tail.[2] Pick up an 110 seed bead, a 7mm bugle bead, an 110, a 6mm color A lentil bead, an 110, a bugle, an 110, an A, an 110, and an A. Repeat this pattern until the strand measures 25 in. (64cm). End the

strand with an A, an 110, a bugle, and an 110. At the end of the strand, string a stop bead with a hole large enough to accommodate a T-pin.[3] Repeat steps 1 and 2 twice.[4] Using 6mm color B lentils instead of As, repeat steps 1 and 2 three times with the following change: in step 2 pick up a repeating pattern of an 110, a bugle, an 110, a B, an 110, a B, an 110, a bugle, an

Sally Squire began her professional design career in 1994. She first worked with glass beads and later expanded to other media. Her present focus is on polymer clay beads and design-ing fiber projects that feature her work. Visit Sally’s Web site, zillibeads.com, for more information, or e-mail her at [email protected].

BRAIDING

Page 2: Bijus (2)

beadandbutton.com | October 2007 121

TiffanyMATERIALSnecklace 25 in. (64cm)• 10g7mmbuglebeads• 6mmoffset-holelentil beads(Beadcats, 503-625-2323, beadcats.com) 250colorA 250colorB• 4gsize110seedbeads• clasp

• 25mmcones• 23-in.(7.6cm)eyepins• PowerPro20lb.test• beadingneedles,#10• G-SHypoCement• self-healingpolyfoam board• T-pinsorquilter’spins• chainnosepliers• roundnosepliers• wirecutters

a

b

c

110, and a B. On the final repeat, leave off the last B.[5] Pin the six strands to a polyfoam board. Group the three A strands on the left and the three B strands on the right (photo a).[6] To begin the six-strand braid, cross the far right B strand over the other two B strands (photo b). Cross the far left A strand over the other two A strands and the adjacent B strand (photo c).[7] Continue crossing the far right strand over two strands and the far left strand over three strands for the length of the neck-lace. Rotate each lentil to face outward as you braid.[8] Remove the stop bead from one end of each strand. Using the ends of the six strands, tie an over-hand knot (Basics) at the end of the necklace close to the beads. Tie the six threads to an eye pin with two or three overhand knots. Place a drop of glue on the knot and let it dry.[9] Slide a cone on the eye pin. Make the first half of a wrapped loop (Basics), attach half of a clasp, and finish the wraps. Trim the excess wire.[10] Repeat steps 8 and 9 on the other end of the necklace. w

Page 3: Bijus (2)

With every issue of

Bead&Button magazine

you’ll get 28+ projects, complete

with step-by-step instructions,

detailed photographs, and

illustrations. Let Bead&Button

bring endless imagination

and possibilities to your

jewelry making!

Subscribe TODAY!

Create beautiful jewelry withBead&Button magazine

Order online at www.beadandbutton.com/promo

Enter code I4D2 or call 800-533-6644Monday-Friday, 8:30 am - 5:00 pm Central Time. Outside the U.S. and Canada, call 262-796-8776.

05X1012


Recommended