BIKINI technical description -...

technical description

BIKINI technical description updated: SEH/ Sep 2013, page 1/25

Bikini collection technical description



AMAT-3, S.A.u.

model: Bikini collection design : Jorge Pensi

Cami Can Bros 5, 08760 Martorell -Barcelona- Spain tel.+34 937 755 651 fax.+34 937 753 454 [email protected] www.amat-3.com

1. Frame: Legs made in extruded tubular steel, and welded. The steel tube 20x1,5 mm complies with the norms

UE AFNOR AGS and USA AA 6063. Glides in polyethylene. The frame is coated in epoxy polyester, silver or bauxite metallic finishes. The outer layer is protected with an additional top coat of transparent varnish.

2. Seat and back: made in injected first generation polypropylene from the range HOSTALEN, which has been added stabilizers and UV screeners. 15 Standard colours:

glaciar menta* vainilla blanco perla* grafito negro mostaza*

navy* hierba* pistacho mango* mandarina melocoton rojo

Colours marked * only available for chair or armchair (excluding stools and children chairs). Remarks: The chair can stack up to 10 on a Bikini trolley. The bottom of the seat is always (for both chairs and stools) protected with a polypropylene light grey cover.

Tests: The chair has successfully passed the resistance test under the following norm: American Norm ANSI/BIFMA X5.1-1993, Certified by AIDIMA.



The Bikini collection has the following complementary elements: 1. A wide range of stools; bar or counter height. We offer four versions: stackable, with aluminium footrest,

swivel (with two footrest options) and with gas piston height adjustment (available with or without wheels). The stools come in four versions; swivel, stackable, standard (with footrest in two options) and height adjustable gas stool (available with or without castors).

2. Bikini children chairs with 36 cm seat height. 3. Bikini armchair with metallic structure and polypropylene armrests. 4. A wide range of Bikini benches with 2, 3, 4, 5, or 6 positions, using aluminium polished armrests/legs. 5. Bikini chairs with writing tablet in polyamide light/dark grey according to frame colour. 6. Special upholstery for seat (see page 19).

medium stool/stack. alu. footrest barstool chair miniBikini chair children chair

swivel stool (steel or aluminium footrest) bench (available in 2-6 positions) armchair chair writing tablet Other complements: The Bikini collection may be combined with other models and items, also designed by Jorge Pensi, and several special devices: 1. The Splash table collection, offering a wide range of sizes and top finishes, for indoor and

outdoor uses. 2. The Splash armchair, suitable for indoor and outdoor uses. 3. Transport trolley to carry the chairs stacked. 4. Chair hanger for tables, for easy cleaning purposes. 5. An optional anticorrosion system enable Bikini chair to be used outdoors. 6. A linking removable device, for ganging chairs, as seen beside this line. 7. The Twist barstool.



Bikini Bench details:

Legs and arms made in polished and anodised cast aluminium assembled by means of stainless steel screws. Every leg has its own adjustable glide. Frame composed of two rectangular beams in extruded rectangular steel, welded to the tubular steel of every seat by 6 points of union. The steel tube 20x1,5 mm complies with the norms UE AFNOR AGS, and USA AA 6063. The frame is coated in epoxy polyester, silver or bauxite metallic finishes. The outer layer is protected with an additional top coat of transparent varnish. Seat and back made in injected polypropylene as before described for the chairs. Tablets, side or centred, fixed to the beams, occupying the space of one seat, with three options; Compact laminate for indoor; MDF board with high pressure laminate; varnished beech plywood board. Colours according our sample catalogue. Detail of the under seat bench frame beam-seat welding points beam-leg assembly



Palma - Bikini This is a bench option with aluminium foot and regulator, adjustable to the rear wall baseboard.



Bikini linking device details: A complementary linking piece may be always inserted on the back legs to gang Bikini chairs. This rubber piece needs to be inserted first by its smaller hole on one of the legs, and may remain there due its striated inner surface. The second -and slightly bigger- hole may be then used to slip a second chair for ganging. It is then a removable piece, easy to mount/dismount that can remain on the chair also when stacked. It may form alignments indistinctly; straight or curved. Striated smaller hole to be fixed Bigger hole to slip the linked chair

mounted linking piece slipping a second chair two linked chairs



Dimensions in cm:

ISBI chair ISBM armchair ISBI+TSBIK chair+tablet

ITBF mini Bikini low stool ISBP children chair

ITBC stackable barstool ITBB barstool, footrest aluminium

ITBA swivel barstool ITBG swivel barstool, footrest aluminium

ITBE stackable medium stool ITBD medium stool, footrest aluminium



Bikini benches dimensions:

JB3 JB3 3 places/2 seats+1 table A-A 3 places/2 seats+1 table AA-

JB2 JB2 JB4

2 places/2 seats 2 pl./1 seat+1 table A- 4 places/4 seats

JB5

5 places/5 seats

JB6

6 places/5 seats+1 table -AAAAA























special upholsteries for seat only



two linked Bikini chairs



Bikini chairs stacked on a trolley





ISBP children chair with a special tablet



Colours: Attached range of available colours. Special colours are available for projects bigger than 200 pieces. Also fire retardant polypropylene is possible for more than 300 pieces. Please ask for quotation.



Date post:	30-Aug-2018
Category:	Documents
Upload:	dinhkhanh
View:	290 times
Download:	17 times

BIKINI technical description -...

Documents