whip. LESS DOWNTIME, MORE PRODUCTIVITY When dealing with bulk solids, product flow in the production line can’t be ignored. Build-up, ratholing, bridging and plugging too often keep both the product and the profits in the bin. BinWhip is valuable because it eliminates hassle and reduces costs. It takes care of flow problems quickly, minimizes down time, and keeps employees safe and on task. Results are measurable. HYDRAULIC POWER FOR TORQUE AND CONTROL The BinWhip is powered by hydraulics, which means there is more power, better control, and less expense. Hydraulic cleaning heads deliver tremendous power, yet are safe, easy to control, and won’t damage vessel walls. No external air is needed for operation, so plant air compressors are not tied up when the BinWhip is in use. The Hydraulic Power Unit requires only a 440 Volt 3-phase electrical hook-up to operate. SAFE, NO BIN ENTRY The BinWhip works from the top of the vessel, which eliminates the need for dangerous, confined space entry by employees. EASY TO MOVE, USE The BinWhip breaks down into easily-handled pieces, so setting up and moving from bin to bin is quick and easy. It works on vessels of all sizes, from a small 4’ x 4’ ingredients bin to a 30’ x 150’ coal silo. The BinWhip restores storage vessels to 100% capacity. If the material is currently usable, it can be reclaimed. BinWhip gets the job done! Powered by Hydraulics, BinWhip has Exceptional Torque and Control
Transcript
whip.
LESS DOWNTIME, MORE PRODUCTIVITY
When dealing with bulk solids, product flow in the production line can’t be ignored. Build-up, ratholing, bridging and plugging too often keep both the product and the profits in the bin. BinWhip is valuable because it eliminates hassle and reduces costs. It takes care of flow problems quickly, minimizes down time, and keeps employees safe and on task. Results are measurable. HYDRAULIC POWER FOR TORQUE AND CONTROL
The BinWhip is powered by hydraulics, which means there is more power, better control, and less expense. Hydraulic cleaning heads deliver tremendous power, yet are safe, easy to control, and won’t damage vessel walls. No external air is needed for operation, so plant air compressors are not tied up when the BinWhip is in use. The Hydraulic Power Unit requires only a 440 Volt 3-phase electrical hook-up to operate. SAFE, NO BIN ENTRY
The BinWhip works from the top of the vessel, which eliminates the need for dangerous, confined space entry by employees. EASY TO MOVE, USE
The BinWhip breaks down into easily-handled pieces, so setting up and moving from bin to bin is quick and easy. It works on vessels of all sizes, from a small 4’ x 4’ ingredients bin to a 30’ x 150’ coal silo. The BinWhip restores storage vessels to 100% capacity. If the material is currently usable, it can be reclaimed. BinWhip gets the job done!
Powered by Hydraulics, BinWhip has Exceptional Torque and Control
BRIDGING When material is broken but bridges above the vessel opening, BinWhip and BinDrill will make the material flow.
BUILD-UP When material hangs up on the sides of the bin, BinWhip knocks material away from the walls, restoring the vessel to full capacity.
RATHOLING BinWhip makes quick work of eliminating ratholes from silos and frees up dead non-flowing material
PLUGGING Combined with Pneumat’s BinDrill, plugged bins can be cleared effectively and safely
silo cleanout system
Pneumat Systems, Inc. 110 Mohr Drive
Mankato, Minnesota 56001 USA 1.800.458.9446 | 507.345.4553
FX: 507.345.3639
www.pneumat.com
BINWHIP TECHNOLOGY
D
C
B
A E
F H
G
I
J
HOSE REEL/BIN MOUNT ASSEMBLYSeries 9000(128 lbs) (48 kg) /9250(125 lbs) (48 kg) /9500(100 lbs) (37 kg)
TELESCOPING BOOM ASSEMBLIES
POWER UNIT ASSEMBLY ALL MODELS (350 lbs) (130 kg)
4 – 7 Ft. (1.2 – 2.1 m), 2-Section Boom (30 lbs) (11 kg)
7 – 12 Ft. (2.1 – 3.6 m), 2-Section Boom (45 lbs) (17 kg)
8 – 18 Ft. (2.4 – 5.4 m), 3-Section Boom (65 lbs) (24 kg)
10 – 22 Ft. (3.0 – 6.7 m), 3-Section Boom (76 lbs) (28 kg)
CLEANING HEAD ALL MODELS (60 lbs)(22 kg)
The Pneumat BinWhip is a unique tool, developed to clean clogged storage vessels without the danger of entering the vessel itself. It attaches easily to an opening at the top of a bin or silo. Its boom extends into the vessel to act as a guide for the main hose assembly and attached cleaning head. Flexible whips, attached to the cleaning head, create a buzzsaw-like cutting action that will knock out the toughest hang-ups without damaging vessel walls. Personnel never enter the bin, but can easily position the cleaning head inside the vessel by rotating or moving the boom up or down. The result is a clean vessel and reclaimed product.
The BinWhip is effective on virtually any bulk material, including: catalysts cement clay clinker coal coarse ore concentrate coke DDGs feed fertilizer fly ash hydrated lime gravel gypsum minerals paper pulp pigments plastics powder refuge salt sand sawdust slag soda ash soybean meal talcum powder wheat midds wood chips wood pulp
CLEANING HEAD Powered by hydraulics, the cleaning head creates the torque and power needed to knock out hung-up materials, and offers superior control. Rotation is reversible.
TELESCOPING BOOMS Muti-section high strength aluminum booms adjust at pre-set stops for easy adjustment to vessels of various sizes.
MODULAR ALUMINUM CONSTRUCTION BinWhip’s aircraft-grade aluminum structure sets up and breaks down quickly for easy transfer from bin to bin.
CUSTOM LENGTH HOSES All hoses are high strength, abrasion resistant wire-braid construction that can be custom fitted to suit every bin size.
HYDRAULIC POWER UNIT Our explosion-proof 7.5 HP power unit has the mobility of a two-wheel hand truck. Its portable controls and high-efficiency industrial pump make precision control of the BinWhip and its allied Pneumat product, the BinDrill, possible for all functions.
