1

Bio-data

Dr. Poonam Kumari

Associate Professor

Department of Mechanical Engineering

IIT Guwahati

Guwahati-781039, Assam

Email(s) and contact number(s)

kpmech.iitd@gmail.com; kpmech@iitg.ac.in

Mobile no. 8721076404; Ph No. 03612583434

At Present:

Associate Professor at Department of Mechanical Engineering at IIT Guwahati

since 27th October, 2018.

Assistant Professor at Department of Mechanical Engineering at IIT Guwahati

since 1st July, 2013 to 26th October, 2018.

Academic Background Postdoctoral Fellow: School of Engineering Science of Simon Fraser University, Burnaby BC

Canada (From Aug., 2012 to June 2013)

Ph.D. Department of Applied Mechanics (Indian Institute of Technology Delhi), (2008-2012)

Thesis Title: Analytical solutions for micro- and macro-mechanics of smart structures integrated

with piezoelectric composites

M.Tech. in Design Engineering (CGPA 9.03 out of 10), Department of Applied Mechanics IIT Delhi,

(2005-2007)

Thesis Title: 2D exact solutions and third order zigzag theory for hybrid angle-ply flat

panels

B.E. in Mechanical Engineering (78% with honors), BRCM CET Bahal, Bhiwani, affiliated by MDU

Rohtak, Haryana, (under top ten Rank in the University almost in every semester) (2000-2004)

2

Employment Details

Sl.

No

.

Organisation /

Institute

Position

held

Nature of duties / work Date of

joining

Date of

leaving

1 Department of

Mechanical

Engineering,

IIT Guwahati,

Guwahati 781039,

Assam

Associate

Professor

Teaching courses,

conducting research and

guiding Ph.D and M.Tech

students

27th October,

2018

Continuin

g

2 Department of

Mechanical

Engineering,

IIT Guwahati,

Guwahati 781039,

Assam

Assistant

Professor

Teaching courses,

conducting research and

guiding Ph.D and M.Tech

students

1st July, 2013 26th

October,

2018

3 Prof. Nimal Rajapkase

School of Engineering

Science,

Simon Fraser

University,

Burnaby BC Canada

Postdoctoral

Fellow

Development of 3D model

for bending analysis of

composite plates and

helping other Ph.D students

27th August,

2012

21st June,

2013

4 Prof. Santosh Kapuria

Department of

Applied Mechanics

IIT Delhi

Research

Associate

(Concurrent

ly with

Ph.D)

Finite Element analysis of

large diameter miter bends

of reactor regenerator piping

for Guru Gobind Singh

refinery project at Bhatinda

June, 2009 September

, 2009

5 Prof. Santosh Kapuria

Department of

Applied Mechanics

IIT Delhi

Research

Associate

(Concurrent

ly with

Ph.D)

Standarized design

of mounded horizontal

pressurized LPG storage

vessels- Bharat Petroleum

Corporation Ltd. Noida

through ANAYS simulation

Nov.2007

Feb 2008

Jan 2008

April,

2008

6 Prof. Santosh Kapuria

Department of

Applied Mechanics

IIT Delhi

Research

Associate

Finte element modeling of

smart hybrid plates under

Thermoelectromechanical

analysis

January 2007 June 2007

7 Prof. G.N. Tiwari

Center for Energy

Junior

Research

Optimum design of a low

cost green house for Indian

August,. November

3

Studies, IIT Delhi Fellow

climate conditions: a

thermal engineering

approach

2005 2006

8 FCC RICO, Manesar,

Gurgaon, Haryana

Production

Engineers

Recruitment and training for

women assembly line for

two wheeler clutches

assembles

April 2005 August,

2005

9 Neel Metal Products

Ltd. Gurgaon,

Haryana

Graduate

Engineer

Trainee

Product development of

sheet metal parts for four

wheeler, particularly car-

models

July, 2004 April,

2005

Research Project Implementation

Projects

Sr No

Project Title Sponsor Agency

Amount From date

To date

Major Outcome

1 Analytical solution for boundary layer

stresses in piezoelectric plates with longitudinally functionally graded

materials

Young Scientist Scheme –DST at IIT Guwahati

23,96,020 23-03-2017

23-03-2020

1. Mathematical model for free vibration case 2. Functionally graded model development 3. Till now 2 Ph.D and 4

Master projects are guided.

2 Development of

Piezoelectric Fiber Reinforced Composites

NEWGEN IEDC

PROJECTS

2,50,000 Dec, 2018

Dec 2020

A flexible sensor is

prepared using electros pining

method 3 Sensing Acoustical

Emissions from the Knee for Wearable

Joint Health Assessment

NEWGEN IEDC

PROJECTS

2,50,000 Dec, 2018

Dec 2020

Basic knee-joint stress analysis is

conducted and developing a

small device to assess the

health. 4 Experimental and

theoretical studies SERB

Women 18,00,000 May

2019 May 2022

4

of thermoelastic response of axially graded beams

Excellence Award 2019

Sr No

Project Title Sponsor Agency

Amount From date

To date

Major Outcome

1 Development of

three-dimensional

solutions for

piezoelectric

plates

subjected to

arbitrary

boundary

conditions

IIT –

Guwahati-

Start-up

Grant (5.

Lakh)

5 lakh 03-03-

2014

03-03-

2016

1. New

Mathematical

and solving

technique

2. Robust

algorithm in

Fortran

3. Training to

Ph..D student

4. Two papers

in

International

Journals

Awards & Honours

12 SERB Women Excellence Award, 2019

11 Young-Engineer INAE Award-2017

10. Inducted as Young Associate of the INAE Academy upto age 45 years 2017

9 Outstanding Reviewer contribution June, 2017 by the Editors of Composite Structures

8 Certificate of Reviewing award May, 2017 by the Editors of Composite Structures

7 Certificate of Recognition by the Steel Congress 2017 Organizing Committee members (Nov-16-

17, London, UK)

6 Certificate of Appreciation Bronze : Ministry of Finance Govt. of India.

5 Young scientist in Mechanical Engineering-Venus International Foundation -2015

4 Biography published in the wire (https://thewire.in/gender/mechanical-engineer-powering-solid-

mechanics)-2018

3 CSIR International travel grant (Full Air Fare ) Presenting the paper in 16th International conference

5

on composite structures which was held at FEUP,Porto, Portugal, 28-30 June, 2011

2 Travel support from SFU Canada, for presenting paper at 7th M.I.T. Conference on Computational

Fluid and Solid Mechanics, Boston, MIT (2013)

1 MHRD Scholarship for perusing Ph.D at IIT Delhi (2008-2012)

Short-term courses / workshops / conferences organized

Sl.

No.

Courses / Workshops / Conferences Year

1. Mechanics of composites for engineering applications-TEQUIP-III

(May-21-25tH 2019)

2019

2. The Twelveth National Frontiers of Engineering (12NatFoE)

hosted at Indian Institute of Technology Guwahati

17-18 September 2018

2018

Important Seminar/ Conference Attended

Sl.

No.

Conference/Seminar Title of Paper/ Invited

talk or Chairing Session

if any

Year

1. 3rd Euro Congress on Iron, Steel and

Construction Engineering , November 16-

17, 2017 London, United Kingdom

Invited Talk 2017

2. ICCE-25, 16-22 July, 2017, Rome, Italy. Chairing the session and

also presented paper

2017

3. 13th International Conference on Vibration

Problems (ICOVP-2017)

Chaired two three

sessions.

2017

4 Proc. 4th Asian Conference on Mechanics

of Functional Materials and Structures

(ACMFMS), October, 2014, Nara, Japan

Accurate estimation of

interlaminar stresses for

the adhesively bonded

piezolaminated plates

2014

Courses taught at IIT Guwahati

6

Sl.

No.

Name of Course Whether

PG/UG

Single

instruction /

Shared

instruction

Class strength

(approx.)

No. of times taught

1. Engineering Mechanics UG Single and

Coordinator

(one time)

160 3 times (2014, 2016,

2017) Jan-May

2. Engineering Drawing UG Single 160 2 times

(2016, 2018)

3. Machine Drawing UG Single 70 3 times

(2013, 2014, 2015)

4 Theory of plates and

shells

PG Single 20 Five times (2014,

2015, 206, 2017, 2018)

5 Smart Material and

structures

PG Shared 20 Once (2014)

6 Solid Mechanics-II UG Single 45 Once (2018)

7 Workshop-1 UG Single 80 Two times

(2013, 2017

Laboratory Set up and Teaching Material Development

1 Laboratory Set up

Smart material and Structure Lab : Electrospinning UNIT

to develop flexible sensor, Initiate the purchasing

process and successful installation of ABAQUS research

version –ME department CAD Lab.

2 Teaching Material Development

MOOCs course: Theory of Rectangular Plates:

https://onlinecourses.nptel.ac.in/noc18_me65/preview

Students Guided

7

Ph.D. Supervision

Sl.

No.

Name of the

Student Thesis Title / Area

Period Category

(Regular/ PT/

Spon/ QIP)

Joint/Single

Supervisor From To

1. Susanta Behera Three dimensional static

and dynamic analysis of

hybrid plate using multi-

term multi-field

extended Kantorovich

method

July 2013 Jan

2018

Regular Single

2 Agyapal Singh 3-D analytical solution

of piezolaminated plates

with inplane stiffness

variation

July,2014 Till

date

Regular Single

3 Sharnish Kar Static Analysis of Shell

Structures

July, 2015 Till

Date

Regular Single

4. Mukesh Kumar Flexible piezoelectronic

sensor

July, 2017 Till

date

Regular Single

5. Viwek Kumar Fatgue analysis of

composites

Jan, 2018 Till

date

Regular Single

6 Dirander Verma Knee Health Assessment Jan, 2018 Till

date

Regular Joint (with

Prof. S.

Kanagraj)

M.Tech. Supervision

Sl.

No.

Name of the

Student Thesis Title/ Area

Period Category

(Regular/

PT/ Spon/

QIP)

Joint/Single

Supervisor From To

1. Abhishek Yadav Analysis of Free Corner

effect in Composite Plate

Using Kantorovich

Method

2014 2015 Regular Single

2. Aman Shakya Analysis of Arbitrary

Supported Piezoelectric

Plate Using Kantorovich

Method

2015 2016 Regular Single

8

3. Rupam Hazarika Static Analysis of

Functionally Graded

Panel using Multi-term

Extended Kantorovich

Method

2016 2017 Regular Single

4 Prabhakar Bind Extended Kantorovich

Method for 2-D

Piezoelasticity Solution

of Hybrid Beams for

Energy Harvesting

Purpose

2016 2017 Regular Single

5 Praveen Kumar Nonlinear Dynamic

analysis

Of piezoelectric based

energy Hravestor

2014 2015 Regular Joint (with Prof.

S.K. Dwivedy)

6 Abhay Mishra Analysis of multi-

directional functionally

graded beam under non-

uniform thermal load.

2017 2018 Regular Single

7 Anit Sen 2D harmonic analysis of

piezoelectric beam under

electromechanically

excitation using

extended Kantorovich

method.

2017 2018 Regular Single

8 Ram Krishan

Yadav

Free vibration of angle-

ply panel subjected to

arbitrary support

condition.

2018 2019 Regular Single

9 E. Husain Free vibration of axially

functionally graded

beam

2018 2019 Regular Single

10 Niloptal Knee-joint analysis 2018 2019 Regular Joint (with Prof

S. Kanagraj)

BTP Projects

3

9

Books/Book Chapters

Chapter Title : Three-Dimensional Analytical Solution for FGM Plate with Varying Material

Properties in In-plane Directions Using Extended Kantorovich Method

Book Title: Recent Advances in Structural Engineering, Volume 1

eBook ISBN 978-981-13-0362-3

DOI 10.1007/978-981-13-0362-3

Hardcover ISBN 978-981-13-0361-6

Series ISSN 2366-2557

Administrative responsibilities

Institute level

1. Member of Medical User Group (2015-2017)

2. Organizing member of 12 Natfoe

Departmental level 1. Member of DUPC- (2018-2020)

2. Faculty Advisor: SAE India. (2018 onward)

3. Vice Chairman BTP Presentation (2014, 2016, 2017)

4 Committee member (Ph.D section and M. Tech selection ) (2018, 2017)

Summary of my research achievements / highlights The focus of research is the development of mathematical models based on the principles of advanced

mechanics for analysis of composite/sandwich plates and shells integrated with piezoelectric layers.

My research achievements and accomplishments are given below.

A) Three-dimensional static and dynamic models are developed for piezolaminated angle-ply panel

and plates subjected to arbitrary boundary conditions. The significant extensions made to

extended Kantorovich method to make suitable for analyzing three dimensional problems. It is

demonstrated through a series of numerical studies that the present methodology can accurately

predict the edge effect or boundary effects at very clamped or free edges.

B) Recently, this technique has been extended to develop an accurate 3D elasticity solution for

rectangular FGM plates with longitudinally varying material properties.

C) This development has opened the area for developing the close form solution for FGM plates

with property variation along multiple directions

D) Very recently, first time, an analytical model is developed for static analysis of arbitrarily

supported composite cylindrical based on 3D elasticity. Here also, it is observed that present

technique converge very fact and predict edge effect accurately.

10

E) Further, this technique can be employed or extended to provide analytical solution for many

classical and new engineering problems.

F) The prediction of response of hybrid laminated structures integrated with PFRC layers requires

an accurate determination of their effective properties. To address the above concern, a fully

coupled, 3D micromechanical model was presented first time for computing the effective

electro-thermo- elastic properties of a unidirectional PFRC lamina with the poling and electric

field applied normal to the fiber direction.

G) The most accurate global as well as local layerwise response of hybrid laminated structures can

be obtained by the exact analytical solution of the equations of three dimensional (3D)

piezoelasticity. In this direction, benchmark analytical 3D piezoelasticity solutions for the static

and dynamic response of simply-supported hybrid cylindrical shells of revolution and shell

panels integrated with monolithic piezoelectric or PFRC layers are presented.

H) Two-dimensional static and analytical solution of Levy-type rectangular hybrid plates is also

developed based on a recently developed coupled efficient layerwise zig-zag theory.

I) Two-dimensional static solution for all round arbitrary supported plates are also developed

using the EKM method. These solutions can act as benchmarks to assess numerical solutions.

J) Dynamic analysis of piezoelectric based energy harvester is developed which may help to

develop prototype models for energy harvesting purpose.

K) Recently received the Young Engineer Award from INAE -2017.

L) The above developments will help in designing and developmental phase of components in

aerospace, civil, consumer products and medical science field which in turn help to make better

products under Make in India scheme.

List of Publication International Journal Publication list

Sr

No.

Authors Document Title Journal Vol Page No Year

29 A. Singh, P.

Bind, P.

Kumari

2D free vibration solution of

the hybrid piezoelectric

laminated beams using

extended Kantorovich

method

Journal of

The

Institution

of Engineers

(India):

Series C

Accepted For publication

2019

28 S. Behera,

P. Kumari

Analytical piezoelasticity

solution for natural

Frequncies of Levy-type

piezolaminated plates

International

Journal of

Applied

Mechanics

11 1950023 2019

11

27 P. Kumari,

Shranish Kar

Static behavior of arbitrarily

supported composite

laminated cylindrical shell

panels :An analytical 3D

elasticity approach

Composite

Structures

2017 949-965 2019

26 A. Singh,

P. Kumari

Analytical Solution of

Functionally Graded Beam

Having Longitudinal

Stiffness Variation

International

Journal for

Computation

al Methods

in

Engineering

Science &

Mechanics

19 390-395 2018

25 A. Singh,

P. Kumari,

R. Hazarika

Analytical Solution for

Bending Analysis of Axially

Functionally Graded Angle-

Ply Flat Panels

Mathematica

l Problems in

Engineering

ID 2597484

17.00 2018

24 A. Singh,

P. Kumari

Two-Dimensional elasticity

solution for arbitrarily

supported axially

functionally graded beams

Journal of

Solid

Mechanics

10 719-733 2018

23 S. Behera,

P. Kumari

Free Vibration of Levy-type

Rectangular Laminated

Plates using Efficient Zig-

Zag Theory

Advances in

Computation

al Design

3 213-232 2018

22 P. Kumari,

A. Singh,

R.K.N.D.Raj

apakse,

S.Kapuria

Three-dimensional static

analysis of Levy-type

functionally graded plate

with in-plane stiffness

variation.

Composite

Structures

168 780-791 2017

21 P.Kumari, S.

Behera

Three-dimensional free

vibration analysis of levy-

type laminated plates using

multi-term extended

Kantorovich method.

Composites

Part B:

Engineering.

116 224-238 2017

20 P.Kumari,

A. Shakya

Two-Dimensional Solution

of Piezoelectric Plate

Subjected to Arbitrary

Boundary Conditions using

Extended Kantorovich

Method.

Procedia

Engineering

173 1523-1530 2017

12

19 P.Kumar,

S.K.Dwivedy

,

P.Kumari

Dynamic Analysis of

Piezoelectric Based Energy

Harvester under Periodic

Excitation.

Procedia

Engineering

144 635-644 2016

18 P.Kumari,

S.Behera,

S. Kapuria

Coupled three-dimensional

piezoelasticity solution for

edge effects in Levy-type

rectangular piezolaminated

plates using mixed field

extended Kantorovich

method.

Composite

Structures

140 491-505 2016

17 P.Kumari,

S.Kapuria,

RKND

Rajapakse

Three-dimensional extended

Kantorovich solution for

Levy-type rectangular

laminated plates with edge

effects

Composite

Structures

107 167-176 2014

16 P.Kumari,

S.Kapuria

Extended Kantorovich 3D

solution and performance of

2D laminate theories for

edge effects in smart

piezolaminated structures

Proceedings

of the Indian

National

Science

Academy

79 575-585 2013

15 S.Kapuria,

P.Kumari

Extended Kantorovich

method for coupled

piezoelasticity solution of

piezolaminated plates

showing edge effects

Proceeding

of Royal

Society A

469 20120565.00

2013

14 S.Kapuria,

P.Kumari

Boundary layer effects in

Levy-type rectangular

piezoelectric composite

plates using a coupled

efficient layerwise theory

European

Journal of

Mechanics A

36 43466.00 2012

13 S.Kapuria,P.

Kumari

Multi-term extended

Kantorovich method for

three dimensional elasticity

solution of laminated plates

Journal of

Applied

Mechanics

(ASME)

79 Article no. 061018

2012

12 S.Kapuria,

P.Kumari

Extended Kantorovich

method for three

dimensional elasticity

solution of laminated

composite structures

Journal of

Applied

Mechanics

(ASME)

78 Article No. 061004

1-8

2011

13

11 S.Kapuria,

P.Kumari

Three-dimensional iso-field

micromechanics for

effective

electrothermoelastic

properties of piezoelectric

composites

Journal of

Mechanics

of Materials

and

Structures

6 249-265 2011

10 P.Kumari,

S.Kapuria

Boundary layer effects in

rectangular cross-ply Levy-

type plates using zigzag

theory

ZAMM 91 565-580 2011

9 S.Kapuria,

P.Kumari

Three-dimensional

piezoelasticity solution for

dynamics of cross-ply

cylindrical shells integrated

with piezoelectric fiber

reinforced composite

actuators and sensors

Composite

Structures

92 2431-2444 2010

8 S.Kapuria,

P.Kumari,

J. K. Nath

Efficient modeling of smart

piezoelectric composite

laminates-A review

Acta

Mechanica,

214 31-48 2010

7 P.C.Dumir,

P.Kumari,

S. Kapuria

Assessment of third order

smeared and zigzag theories

for buckling and vibration

of flat angle-ply hybrid

piezoelectric panels

Composite

Structures

90 346-362 2009

6 S.Kapuria

P.Kumari,

J.K. Nath

Analytical piezoelasticity

solution for vibration of

piezoelectric laminated

angle-ply circular

cylindrical panels

Journal of

Sound and

Vibration

324 832-849 2009

5 P.Kumari,

J.K.Nath,

S.Kapuria,

P.C.Dumir

Efficient Global Zigzag

Theory for Elastic

Laminated Plates

Journal of

Reinforced

Plastics and

Composites

28 1025-1047 2009

4 P.C.

Dumir,J.K.

Nath,

P.Kumari,S.

Kapuria

Improved efficient zigzag

and third order theories for

circular cylindrical shells

under thermal loading

Journal of

Thermal

Stresses

31 343-367 2008

14

3 P. Kumari,

J.K.Nath,

S.Kapuria,

P.C. Dumir

An improved third order

theory and assessment of

efficient zigzag theory for

angle-ply flat hybrid panels

Composite

Structures

83 226-236 2008

2 P.C.Dumir,

S.Kapuria,

P. Kumari,

J.K. Nath

Two-dimensional

benchmark solution for

buckling and vibration of

simply supported hybrid

piezoelectric angle-ply flat

panels

ZAMM-

Zeitschrift

Fur

Angewandte

Mathematik

Und

Mechanik ,

88 42-57 2008

1 P. Kumari,

J.K.Nath,

S.Kapuria,

P.C. Dumir

2D exact solutions for flat

hybrid piezoelectric and

magnetoelastic angle-ply

panels under harmonic load

Smart

Materials

and

Structures

16 1651-1661 2007

Research Papers in International/National conferences

1. P. Kumari. S. Kar. Three dimensional elasticity solution for a simply supported cylindrical composite panel using the extended Kantorovich method. International Conference on Composite Materials and Structures, 27-29th December 2017, Hyderabad, India

2. A. Singh, P. Kumari. Analytical solution of functionally graded beam having longitudinal stiffness variation. International Conference on Composite Materials and Structures, 27-29th December 2017, Hyderabad, India.

3. B. Prabhakar, P. Kumari, S. Agyapal and K. Shranish Experimental study of piezoelectric beam under free

and forced vibration response for energy harvestin application, 13th International Conference on Vibration

Problems (ICOVP-2017) 29th November - 2nd December, 2017

4 S. Behera and P. Kumari, Effect of adhesive thickness on the free vibration of arbitrary supported smart

plates, 13th International Conference on Vibration Problems (ICOVP-2017) 29th November - 2nd December,

2017

5 S. Kar and P. Kumari, A review on three-dimensional solution approaches for bending and dynamic analysis

of piezolaminated cylindrical shell structures, 13th International Conference on Vibration Problems (ICOVP-

2017) 29th November - 2nd December, 2017.

6 P. Kumari, Three dimensional solutions for smart composite/sandwich plates subjected to Levy-type support conditions using extended Kantorovich method, 3rd Euro Congress on Iron, Steel and Construction Engineering , November 16-17, 2017 London, United Kingdom

7 A. Singh, R. Hazarika, P. Kumari. Three-dimensional analytical solution of FGM panel with varying material

properties along in-plane directions using Extended Kantorovich Method. ICCE-25, 16-22 July, 2017, Rome,

15

Italy.

8 S Behera, P Kumari. Free vibration analysis of piezoelectric plate using Mixed-field Extended Kantorovich

Method. INCAM – 2017, 5-7 July 2017, MNNIT Allahabad, India, PP 37-38.

9 A. Singh, P. Kumari. Accurate stress solution for laminated rectangular plates bonded with functionally graded

adhesive interlayer and subjected to transverse loading. INCAM – 2017, 5-7 July 2017, MNNIT Allahabad,

India, PP. 41-42 .

10 P. Kumari, A. Singh. Three-dimensional analytical solutions for FGM plate with varying material properties in in-plane directions using extended Kantorovich method. Proceedings of Structural Engineering convention (SEC-2016, 21-23 December 2016) CSIR-SERC, Chennai, INDIA 2016, P.548-553

11 P. Kumari, A. Shakya. Two-dimensional solution of piezoelectric plate subjected to arbitrary boundary

conditions using extended kantorovich method. IMPLAST 2016, 11-14 December, 2016, IIT Delhi, New Delhi,

India.

12 Kumari P., Yadav P., Singh A. Two-dimensional static analysis of composite plate subjected to arbitrary

boundary conditions using extended Kantorovich method. ICCMS2016, IIT Bombay, Mumbai, India, June 27-

July 1, 2016.

13 S Behera, P Kumari, Accurate estimation of the influence of adhesive bonding on the free vibration of

laminated plates. 2nd international conference on Mechanics of Composites (MechComp2016), 11-14 July,

2016. Porto, Portugal.

14 P Kumari, S Behera, Natural frequency of orthotropic laminated plate using extended Kantorovich method. 60th Congress (an International Conference) of Indian Society of Theoretical and Applied Mechanics (i.e., ISTAM 2015). 16-19 December, 2015. Jaipur, India

15 P. Kumar, S. K. Dwivedy, P. Kumari Dynamic analysis of piezoelectric based energy harvester under periodic

excitation, 12th International Conference on Vibration Problems (ICOVP), IIT Guwahati 14-17 Dec, 2015.

16 S. Behera, P. Kumari, Assessment of IZIGT for boundary layer effects in levy-type smart piezolaminated plate, 5th International Congress on Computational Mechanics and Simulation (ICCMS), CSIR-Chennai 10-13 Dec. 2014.

17 P. Kumar, S. K. Dwivedy, P. Kumari Nonlinear Dynamic analysis of piezoelectric based energy harvester, 6th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM) , IIT Kharagpur 29-31 Dec. 2014

18 P. Kumari, S Kapuria, Mixed-field extended Kantorovich method for accurate prediction of boundary layer

stresses in composite and piezolaminated structures, Accepted for publication, The Indo-Russian Workshop,

IIT Madras, 2013.

19 P Kumari, Behera S, Kapuria S. Accurate estimation of interlaminar stresses for the adhesively bonded piezolaminated plates. Proc. 4th Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS), October, 2014, Nara, Japan

20 P. Kumari, S Kapuria, Closed form elasticity solutions for laminated plates subjected to arbitrary boundary

conditions using extended Kantorovich method. 7th M.I.T. Conference on Computational Fluid and Solid

Mechanics, 12-14 June, 2013, MIT Boston, USA.

21 P. Kumari, S Kapuria, Assessment of two dimensional theories for boundary layer effect in smart

16

piezolaminated plates, 3rd ACMFMS IIT Delhi, 5-9 December, 2012, New Delhi, India.

22 S. Kapuria, P. Kumari, Multi-term extended Kantorovich method for 3D piezoelasticity solution of piezoelectric

panel, XXIII ICTAM, 19-24 August. 2012, Beijing, China

23 P. Kumari, S. Kapuria, Directional effect of piezoelectric composite actuators/sensors on the dynamic response

of smart angle-ply composite, XVII NASAS, 22-24 Sept. 2011, IIT Kanpur, Kanpur.

24 P. Kumari, S. Kapuria, Three dimensional elasticity solutions of sandwich panels using the extended

Kantorovich method, 16th International Conference on Composite Structures (ICCS16), 28-30 June, 2011,

Porto, Portugal.

25 P. Kumari, S. Kapuria, 3D solution for dynamics of laminated angle-ply circular cylindrical shells with

piezoelectric fiber reinforced composite actuators and sensors, 3rd International Congress on Computational

Mechanics and Simulation, 1-5 Dec. 2009, IIT Bombay, Mumbai.

26 A. S. Srinivas, S. Kapuria, P Kumari, Efficient layerwise finite element with physical and electric nodes for flat

angle-ply hybrid panels in cylindrical bending, 5th ISSS International Conference, 24-26 July 2008, IISc

Bangalore.