Date post: | 30-Oct-2014 |
Category: |
Documents |
Upload: | miguel-angel-gonzalez-caceres |
View: | 18 times |
Download: | 1 times |
ANYANG GENERAL INTERNATIONAL CO.,LTD
Add: Suite A, 4/F Jinhao Business Bld.,Renmin Rd., Anyang, Henan, China 455000
Tel: +86 372 5953961 Fax: +86 372 5951936
E-mail: [email protected] Website: http://www.agico.com.cn
Complete Project of Biomass Briquette Plant
Prospect:
Due to the rapid increase in the need of energy source, more people start to
become interested in Biomass Briquette business. Biomass Briquette are
Renewable, Eco-friendly Energy especially for agricultural countries.
Biomass Briquette investment is a best project to generate revenue from
agro-forestry waste and to produce Green Energy to protect the global
environment. The awareness of using Eco-friendly & Non-conventional
Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the
conventional fuel cost.
This plant can make stick shape wood briquette of different diameter and
different shape from biomass and agro-forest waste.
Raw Material to make Biomass Briquette:
Any type of Agro-Forestry waste can be used. But the Moisture Content Should be Less than 12%, grain size is below 5×5mm. Groundnut-shell • Sugarcane residue• Caster Shells/Stalk • Saw dust • Coffee Husk • Paddy Straw • Sunflower Stalk • Cotton Stalks • Tobacco waste Mustard Stalk • Jute waste • Bamboo Dust • Tea waste • Wheat Straw • Palm husk • Soybeans husk • Rice Husks • Forestry wastes • Wood Chips and many other Agro wastes.
Flowchart of the Biomass Briquette Technology:
1. Crushing machine:
FSJII Hammer Mill is suitable for milling raw material like tree branch, cotton
stalk, corn stalk, wheat straw etc) with size less than 50mm(diameter). After
milled, the output size can reach diameter 3-5mm , which is suitable for further
briquetting.
FSJI Wood Crusher is suitable for crushing raw wood with size less than
200mm(diameter). After milled, the output size can reach diameter 3-5mm ,
which is suitable for further briquetting.
The two types of crushers is fitted to the downstream equipments.
FSJI Crusher For Raw Wood FSJII Hammer Mill
Finished Product
Packing machine
Raw material
Crusher Biomass briquette machine
Drier
FSJI Wood Crusher FSJII Hammer mill Model
(For wood) (for tree branch, stalk etc)
Capacity(kg/h) 400-500 500-700
Diameter of Feeding Material ≤ø150-200mm ≤ø35-50mm
Max. Size of Crush Ø5×5mm Ø5×5mm
Motor 11kw 22(for wood)/18.5kw(for straw)
Gross/Net Weight 400/350kg 550/650kg
1700*1150*1200 Overall Dimension (mm) 1250*700 *910
Cyclone (2400*800*800)
Price(USD / FOB) 1300.00 2300.00
2.Dryer
For raw materials with heavy moisture content that above 12%, you need to
install a drier, this drier reduces the moisture content below 12% before
feeding them into Biomass Briquetting Screw Press.
Material for hot air boiler: wood waste, wood briquette, coal, etc.
Principle:
In the dryer, high-speed hot air stream sustain raw material in the suspending
state, then the material is dried. Since air stream speed is very high, and
material is suspending in air stream, the heat transfer surface between air and
solid is large, heat transfer rate is high. It’s peculiarly suitable for drying heat
sensitive material like sawdust, rice shell, milled stalks etc.
In drying process, clean cool air is heated by hot air boiler, and mixed with wet
material sent by spiral feeder. Wet sawdust is dried in few minutes. Dried
material is discharged through centrifugal fan. Exhaust air is let out into
atmosphere.
Sawdust Dryer Model HGJI
Drawing Of Sawdust Dryer Model HGJII
(i) Dryer model HGJ-I, HGJ-II, HGJ-III for lower moisture content
12-25%
The Moisture reducing rate of the dryer HGJ-I, HGJ-II, HGJ-III is 8-12%. This
dryer is equipped with one hot air boiler, it is suitable for drying raw material
with moisture content less than 20-25%.If the moisture content of the raw
material is higher than that, it will need several times of drying to achieve the
requested moisture content for briquetting.
Model HGJ-I HGJ-II HGJ-III
Capacity(Kg/hour) 200-250KG 400-500KG 500-700KG
Size of Input Material
(Diameter) < 3mm & < 5mm < 3mm & < 5mm < 3mm & < 5mm
Temperature of Hot Air 180°C~250°C 180°C~250°C 180°C~250°C
Consumption of Wood Waste 15-20 kg/h 25-30kg/h 30-35kg/h
Power
(Centrifugal Fan+Air Lock) 4kw+1.5kw 5.5kw+1.5kw 11kw+1.5kw
Net/Gross Weight 700/800kg 1200/1300kg 1800/1900kg
Piping dimension(m) 10×1.0×2.0m 15×1.0×2.0m 21×1.2×2.5m
Price(FOB/ USD) USD3200 USD4100 USD5100
(ii) Twin boiler dryer model NHGJ-I, NHGJ-II, NHGJ-III for higher
moisture content 25-40%
Twin boiler dryer is a newly developed dryer with two hot air boilers, it is
suitable for drying raw material with moisture content of 20% -45%, it can
reduce moisture from 20%-45% to 8-12% only one passage or one time.
Model NHGJ-I NHGJ-II NHGJ-III
Capacity(Kg/hour) 200-250KG 400-500KG 500-700KG
Size of Input Material
(Diameter) < 3mm & < 5mm < 3mm & < 5mm < 3mm & < 5mm
Temperature of Hot Air 180°C~250°C 180°C~250°C 180°C~250°C
Consumption of Wood Waste 40 kg/h 60kg/h 100kg/h
Moister content max % : 35-45% 35-45% 35-45%
Dried material max % 8-12% 8-12% 8-12%
Power
(Centrifugal Fan+Air Lock) 5.5kw+1.5kw 7.5kw+0.75kw 11kw+1.5kw
Net/Gross Weight 700/800kg 1200/1300kg 1800/1900kg
Overall dimension(m) 8×4×3.5m 10*4*3.5m 8*4*12m
Price(FOB/ USD) 4800 USD4700 USD6600
3. Biomass Briquette Screw Press:
This Biomass Briquette Screw Press equipped with automatic temperature control system are designed to produce high density wood briquette from biomass. The motor can be 11kw/15kw/18.5kw-3phase-380v-50hz electrical driven motor. This machine can be operated 16 hours per day. The extruded wood briquette can be used as fuel for briquette boilers or boilers for heating. Please note: during briquetting process, there will be some smoke from the briquette machine that have to be expel to atmosphere.
Flow chart of the Biomass Briquetting Process:
Briquette Machine Model ZBJI(11kw motor)
Becoming Plastic
Heating
Pressure Increasing
Raw Material
Briquette
Solid Fuel
Temperature Feedback
Briquette Machine Model ZBJII (15kw motor)
Briquette Machine Model ZBJIII (18.5kw motor)
Wood Briquettes made from Briquetting Screw Press
Biomass Briquetting Screw Press
4.Infrared Contraction Packing Machine for briquette Infrared Contraction Packing Machine is an advanced packing machine in the market now. It adopts infrared quartz pipe to heat the packing material. So it can efficiently save the electric power. The contraction temperature and transmission speed are adjustable. This machine uses contracting pellicle to pack the wood briquettes, you have to send it by hand into the packing machine, and then the packing-material will be heated and contracted to enswathe the briquettes. In this way, the briquettes can be airproof, damp proof, and pollution proof. It also can prevent the wood briquette from the exterior concussion in some extent.
Model ZBJI ZBJII ZBJIII Output kg/h 80-120 120-150 180-230 Motor Power (kw) 11kw(energy saving
type with gear box) 15kw(without gear box)
18.5kw
Electric heater (kw) 1.5kw*3pcs 1.5kw*3pcs 2kw*3pcs Weight(kg) 650kg 650kg 900kg Overall dimension(mm) 1780*750*1290 1650*600*1260 1860*800*1360mm Size of finished products Diameter:
30,40, 50mm Diameter: 30,40,50mm
Diameter: 60,70,80,90,100mm
Price (USD / FOB) 3450.00 3200.00 4450.00
Packing machine
Finished product
Capacity for packing wood briquettes:700-800kg/h Price: USD 2500 FOB China main port One year’s Tear and Wear Parts for Briquette Screw Press 1. ** Inner wear sleeve **
Life of Inner wear sleeve: 1-2 month Price: USD 35×10pieces=USD350 2. ** Forming Cylinder **
Life of Forming Cylinder: 3 month Price: USD 270 * 4pieces=USD1080 3. ** Propeller **
Life of Propeller: 1 month(80-100Ton straw /sawdust) Price: USD 160 * 12 pieces= USD1920
4. ** Heating Collar **
Life of Heating Collar: 3 month (3 pieces is one set) Price: USD 25 * 12pieces=USD300 Delivery time: 25-30 days after receiving payment Payment terms: a. For order amount above USD2000:
50% prepaid in advance by T/T, the balance paid by T/T after seeing bill of lading by fax or email.
b. For order amount less than USD2000: 100% paid by T/T before shipment.
Term of Warranty: 6 months (excluding tear and wear parts) Validity of offer: 3 month