PR
OFI
BU
S-D
PD
evic
eNet
TM
PR
OFI
BU
S-D
PD
evic
eNet
TM
Eth
erne
t/IP
Eth
erne
t TC
P/IP
Read/write heads
Host controller PLC, PC
Interfacevariations
Processors
Data carriers
Han
dy
Pro
gram
mer
Inductive IdentificationThe BIS S system uses a Dual Frequency 3.65MHz read and 560KHz write inductively coupled technology along with passive tags to provide short range RFID solutions up to 50mm for applications that require high capacity memory for up to 32k bytes of data. This system was specially designed for WIP (work in process) or production control such as palletized production and quality traceability applications. This system is used on metal and provides hardened re-usable tagging options.
BIS S Industrial RFID System560 kHz/
3.65 MHz HF
240
BIS S Industrial RFID Systems
560 kHz/3.65 MHz HF
Inductive identification
Data carriers read/write 242Read/write heads 244Processors 246Handy programmer 252
Technical information and definitions can be found on page 354
241n www.balluff.com
BIS S Industrial RFID Systems
Sensing face
Benefit from a large storage capacity
Data carriers read/write
Dimensions 52×32×11 mmHousing material PBTPWeight 27 g
BIS S Programmable8 kBytes Ordering code BIS004J
Part number BIS S-108-32/L16 kBytes Ordering code BIS004K
Part number BIS S-108-42/L32 kBytes Ordering code BIS004L
Part number BIS S-108-52/LOperating temperature 0...+70 °CStorage temperature –20...+85 °CProtection per IEC 60529 IP 67
Appropriate read/write head with max. read/write distanceMountingBIS S-301 30 mmBIS S-302 20 mmBIS S-303 20 mm
Mounting (see technical section for details):
flush in steel
non-flush on steel
non-metal
Antenna type:
rod
round
For installation see technical section.
242
BIS S Industrial RFID Systems
560 kHz/3.65 MHz HF
Data carriers read/write
Dimensions 80x40x22 mmHousing material POMWeight 93 g
BIS S Programmable16 kBytes Ordering code BIS004N
Part number BIS S-150-42/A32 kBytes Ordering code BIS004P
Part number BIS S-150-52/AOperating temperature 0...+70 °CStorage temperature –20...+85 °CProtection per IEC 60529 IP 67
Appropriate read/write head with max. read/write distanceMountingBIS S-301 50 mm
Sensing face
Data carriers read/writeRead/write headsProcessorsHandy programmer
Mounting (see technical section for details):
flush in steel
non-flush on steel
non-metal
Antenna type:
rod
round
For installation see technical section.
243n www.balluff.com
BIS S Industrial RFID Systems
BIS S-302-S115
BIS S-301-S115
Example:
BIS Z-502-PU1-_ _BIS Z-501-PU1-_ _
BKS S117-00
BIS S-6003-... BIS S-6023-...
Connector orientation
First choice in static applications involving large quantities of data
Dimensions 40×40×138 mm 40×40×138 mm 80×80×40 mmHousing material ABS ABS PBT and ABSOrdering code BIS005R BIS005T BIS005FPart number BIS S-302-S115 BIS S-303-S115 BIS S-301-S115MountingOperating temperature 0...+70 °C 0...+70 °C 0...+50 °CStorage temperature –20...+85 °C –20...+85 °C –20...+85 °CProtection per IEC 60529 IP 67 IP 67 IP 67Connection to Processor Processor ProcessorConnection cable See Connectivity section for cable options See Connectivity section for cable options See Connectivity section for cable options
Appropriate data carrier see
dat
a ca
rrie
rsB
IS S
-108
-_ _
/L
see
dat
a ca
rrie
rsB
IS S
-108
-_ _
/L
see
dat
a ca
rrie
rsB
IS S
-150
-_ _
/Ase
e d
ata
carr
iers
BIS
S-1
08-_
_/L
MountingWrite distance in mm 5-20 5-20 10-50 5-30
Read distance in mm 5-20 5-20 10-50 5-30
Offset in mm at distance 5 mm ±5 ±5 ±5 ±57 mm ±5 ±5 ±5 ±5
10 mm ±5 ±5 ±5 ±515 mm ±5 ±5 ±5 ±520 mm ±5 ±5 ±5 ±530 mm ±5 ±550 mm ±5
Read/write heads
Control No 3TLJFile No E227256
Mounting (see technical section for details):
flush in steel
non-flush on steel
non-metal
Antenna type:
rod
round
For installation see technical section.
244
BIS S Industrial RFID Systems
560 kHz/3.65 MHz HF
Sensing faceSensing face Sensing face
Dimensions 40×40×138 mm 40×40×138 mm 80×80×40 mmHousing material ABS ABS PBT and ABSOrdering code BIS005R BIS005T BIS005FPart number BIS S-302-S115 BIS S-303-S115 BIS S-301-S115MountingOperating temperature 0...+70 °C 0...+70 °C 0...+50 °CStorage temperature –20...+85 °C –20...+85 °C –20...+85 °CProtection per IEC 60529 IP 67 IP 67 IP 67Connection to Processor Processor ProcessorConnection cable See Connectivity section for cable options See Connectivity section for cable options See Connectivity section for cable options
Appropriate data carrier see
dat
a ca
rrie
rsB
IS S
-108
-_ _
/L
see
dat
a ca
rrie
rsB
IS S
-108
-_ _
/L
see
dat
a ca
rrie
rsB
IS S
-150
-_ _
/Ase
e d
ata
carr
iers
BIS
S-1
08-_
_/L
MountingWrite distance in mm 5-20 5-20 10-50 5-30
Read distance in mm 5-20 5-20 10-50 5-30
Offset in mm at distance 5 mm ±5 ±5 ±5 ±57 mm ±5 ±5 ±5 ±5
10 mm ±5 ±5 ±5 ±515 mm ±5 ±5 ±5 ±520 mm ±5 ±5 ±5 ±530 mm ±5 ±550 mm ±5
Read/write heads
Data carriers read/writeRead/write headsProcessorsHandy programmer
245n www.balluff.com
BIS S Industrial RFID SystemsProcessors
The compact class BIS -600_ with its reduced dimensions and various interface options can be used wherever ambient conditions require higher protec-tion.
The devices are ideal for IP 65 and applications involving media that is not aggressive to PS plastic.
Small, compact, flexible and economical
Cost-effective identification – operate 2 read/write heads simultaneously
■■ Selectable division of the data width on the PROFIBUS-DP, 4 to 128 bytes
■■ Free assigning of the data width for each read/write head
■■ Optimum data speed, internal cycle time is shorter than the BUS activa-tion time
■■ Service-friendly, all parameter data are stored in an interchangeable memory
■■ BUS address selectable with switches■■ Accepts all read/write heads■■ Interface-compatible with BIS C and BIS L identification systems
Description Processor ProcessorPROFIBUS-DP Ordering code BIS00F3 BIS00F5
Part number BIS S-6002-019-050-03-ST11 BIS S-6022-019-050-03-ST14Supply voltage, Ripple 24 V DC ±20 %, ≤ 10 % 24 V DC ±20 %, ≤ 10 %Current ≤ 600 mA ≤ 600 mAOperating temperature 0...+60 °C 0...+60 °CStorage temperature 0...+60 °C 0...+60 °CProtection per IEC 60529 IP 65/NEMA 12 IP 65/NEMA 12Read/write head ports 2 external 2 externalService interface RS232 RS232Connection for 2 read/write heads BIS S-3_ _ 2 read/write heads BIS S-3_ _Connection type 2 connectors round 5-pin, B-coded,
1 connector round 5-pin2 connectors round 5-pin, B-coded, 2 connector round 5-pin
Accessories included Software GSD file Software GSD fileConnection cable See Connectivity section for cable options See Connectivity section for cable options
PROFIBUS-DP
Control No 3TLJFile No E227256
246
BIS S Industrial RFID Systems
560 kHz/3.65 MHz HF
Processors
BCC0714
BCC06Z9
BCC0715
The ruggedized version BIS S-602_ is in spite of the mechanically rugged die-cast aluminum housing a small, flexible processor which is avail-able with various interface options.
Suitable for all applications with demand-ing requirements for mechanical stability and chemical resistance.
Description Processor ProcessorPROFIBUS-DP Ordering code BIS00F3 BIS00F5
Part number BIS S-6002-019-050-03-ST11 BIS S-6022-019-050-03-ST14Supply voltage, Ripple 24 V DC ±20 %, ≤ 10 % 24 V DC ±20 %, ≤ 10 %Current ≤ 600 mA ≤ 600 mAOperating temperature 0...+60 °C 0...+60 °CStorage temperature 0...+60 °C 0...+60 °CProtection per IEC 60529 IP 65/NEMA 12 IP 65/NEMA 12Read/write head ports 2 external 2 externalService interface RS232 RS232Connection for 2 read/write heads BIS S-3_ _ 2 read/write heads BIS S-3_ _Connection type 2 connectors round 5-pin, B-coded,
1 connector round 5-pin2 connectors round 5-pin, B-coded, 2 connector round 5-pin
Accessories included Software GSD file Software GSD fileConnection cable See Connectivity section for cable options See Connectivity section for cable options
Threaded coverOrdering code: BAM0114Part number: BKS 12-CS-01coded for M12 B connector type
Data carriers read/writeRead/write headsProcessorsHandy programmer
247n www.balluff.com
BIS S Industrial RFID Systems
The compact class BIS -600_ with its reduced dimen-sions and various interface options can be used wherever ambient conditions require higher protection.
The devices are ideal for IP 65 and applications involving media that is not aggressive to PS plastic.
Small, compact, flexible and economical
Cost-effective identification – operate 2 read/write heads simultaneously
■■ Freely selectable buffer size between 0 and 256 bytes
■■ Service-friendly, all parameter data are stored in an interchangeable memory
■■ Accepts all read/write heads■■ Interface-compatible with BIS C and BIS L identification systems
Processors
Description Processor ProcessorDeviceNet Ordering code BIS00F4 BIS00F6
Part number BIS S-6003-025-050-03-ST12 BIS S-6023-025-050-03-ST13Supply voltage, Ripple 24 V DC ±20 %, ≤ 10 % 24 V DC ±20 %, ≤ 10 %Current ≤ 600 mA ≤ 600 mAOperating temperature 0...+60 °C 0...+60 °CStorage temperature 0...+60 °C 0...+60 °CProtection per IEC 60529 IP 65/NEMA 12 IP 65/NEMA 12Read/write head ports 2 external 2 externalService interface RS232 RS232Connection for 2 read/write heads BIS S-3_ _ 2 read/write heads BIS S-3_ _Connection type 3 connectors round 5-pin 4 connectors round 5-pinAccessories included Software EDS file Software EDS fileConnection cable See Connectivity section for cable options See Connectivity section for cable options
DeviceNet™
Control No 3TLJFile No E227256
248
BIS S Industrial RFID Systems
560 kHz/3.65 MHz HF
BCC070F
BCC06Z9
BCC070K
BCC0A09
The ruggedized version BIS S-602 _ is in spite of the mechanically rugged die-cast aluminum housing a small, flexible processor which is available with various interface options.
Suitable for all applications with demand-ing requirements for mechanical stability and chemical resistance.
Processors
Description Processor ProcessorDeviceNet Ordering code BIS00F4 BIS00F6
Part number BIS S-6003-025-050-03-ST12 BIS S-6023-025-050-03-ST13Supply voltage, Ripple 24 V DC ±20 %, ≤ 10 % 24 V DC ±20 %, ≤ 10 %Current ≤ 600 mA ≤ 600 mAOperating temperature 0...+60 °C 0...+60 °CStorage temperature 0...+60 °C 0...+60 °CProtection per IEC 60529 IP 65/NEMA 12 IP 65/NEMA 12Read/write head ports 2 external 2 externalService interface RS232 RS232Connection for 2 read/write heads BIS S-3_ _ 2 read/write heads BIS S-3_ _Connection type 3 connectors round 5-pin 4 connectors round 5-pinAccessories included Software EDS file Software EDS fileConnection cable See Connectivity section for cable options See Connectivity section for cable options
Data carriers read/writeRead/write headsProcessorsHandy programmer
249n www.balluff.com
BIS S Industrial RFID Systems EtherNet/IP™
Description ProcessorEtherNet/IP Ordering code BIS00F7
Part number BIS S-6026-034-050-06-ST19Supply voltage, Ripple 24 V DC ±20 %, ≤ 10 %Current ≤ 400 mAOperating temperature 0...+60 °CStorage temperature 0...+60 °CProtection per IEC 60529 IP 65Read/write head ports 2 externalService interface yesConnection for Read/write heads BIS S-3_ _Connection type Connector round 4-pin, D-coded
1 connector 5-pin 1 connector 4-pin
Accessories included Configuration softwareConnection cable See Connectivity section for cable options
Processors
Control No 3TLJFile No E227256
250
BIS S Industrial RFID Systems
560 kHz/3.65 MHz HF
EtherNet TCP/IP
Description ProcessorEtherNet TCP/IP Ordering code BIS00F8
Part number BIS S-6027-039-050-06-ST19Supply voltage, Ripple 24 V DC ±20 %, ≤ 10 %Current ≤ 400 mAOperating temperature 0...+50 °CStorage temperature 0...+50 °CProtection per IEC 60529 IP 65Read/write head ports 2 externalService interface yesConnection for Read/write heads BIS S-3_ _Connection type Connector round 4-pin, D-coded
1 connector 5-pin1 connector 4-pin
Accessories included Configuration softwareConnection cable See Connectivity section for cable options
Processors
Control No 3TLJFile No E227256
Data carriers read/writeRead/write headsProcessorsHandy programmer
251n www.balluff.com
BIS S Industrial RFID Systems
Function Read/write heads Read/writeDimensions Ø 15×63 ØHousing material Plastic ABSOrdering code BAE0098 BAE008MPart number BIS S-850 BIS S-810-0-003Keyboard 32 buttons, alphanumericDisplay LCD-display, 20 characters/4 linesCurrent 2.4 V rechargeable battery pack NiMHCapacity 1500 mA/hInterface RS232/Balluff DialogOperating temperature 0...+40 °C 0...+50 °CStorage temperature –10...+50 °CProtection per IEC 60529 IP 54 IP 40Read head connection Fixed plug 6-pin Fixed socket 6-pinConnection to BIS S-810Accessories Carrying case included
Appropriate data carrier BIS S-108_ _BIS S-150_ _
For maximum flexibility
Benefit from increased mobility during repair work. The handy programmer with read/write function helps you stay mobile and independent. The handy program-mer is fitted with an interface to a PC.
Handy programmer
Antenna type:
rod
round
Control No 3TLJFile No E227256
252
BIS S Industrial RFID Systems
560 kHz/3.65 MHz HF
ChargerOrdering code: BAE0047Part number: BIS C-701-A
Rechargeable battery 125997
Charging cradle with charging power supplyOrdering code: BAE0048Part number: BIS C-702-A
Sensing face
Function Read/write heads Read/writeDimensions Ø 15×63 ØHousing material Plastic ABSOrdering code BAE0098 BAE008MPart number BIS S-850 BIS S-810-0-003Keyboard 32 buttons, alphanumericDisplay LCD-display, 20 characters/4 linesCurrent 2.4 V rechargeable battery pack NiMHCapacity 1500 mA/hInterface RS232/Balluff DialogOperating temperature 0...+40 °C 0...+50 °CStorage temperature –10...+50 °CProtection per IEC 60529 IP 54 IP 40Read head connection Fixed plug 6-pin Fixed socket 6-pinConnection to BIS S-810Accessories Carrying case included
Appropriate data carrier BIS S-108_ _BIS S-150_ _
Handy programmer
Data carriers read/writeRead/write headsProcessorsHandy programmer
253n www.balluff.com