BITS • TOOLS HARDWARE · bits; overall length 79⁄16". 41817 Square Recess/...

G

6

= Std. Carton Qty.

219

HARDWARE & TOOLS

42294

42293

AP PRODUTCS SQUARE HEAD DRIVER

Aluminum blades with shock-proof,break-proof handles; UL approved.

42293 Sq. Driver #1 #009-HDQB1C 10

42294 Sq. Driver #2 #009-HDQB2C 10

* To complete the display, you need to order 10 cards of each.

Order # Mfr. # Description44747 #009-304CRC Magnetic Bit Holder41800 #009-4P2C #2 Phillips Insert Bit41802 #009-250R1C #1 Square Recess Insert Bit41803 #009-250R2C #2 Square Recess Insert Bit41804 #009-250R3C #3 Square Recess Insert Bit LS41810 #009-000C3C 5/32" Clutch Insert Bit

41811 #009-000C4C 3/16" Clutch Insert Bit

41802 41803 41804 41810 418114180044747

AP PRODUCTSINSERT BITS

FOR MOBILE HOMES,• RVs • HOME SHOP

Refills for the Insert Bits display for mobile homes, vehicles orhome shop. Carded.

* To complete the display, you need to order 10 cards of each.

Order # Mfr. # Description41790 #009-42P2C #2 Phillips Power Bit41789 #009-42P1C #1 Phillips Power Bit41791 #009-42P3C #3 Phillips Power Bit41792 #009-250QB1PC #1 Square Recess Power Bit41793 #009-250QB2PC #2 Square Recess Power Bit41812 #009-250MST1/4C 1/4" Hex Magnetic Socket–1/4" Drive

41813 #009-250MS5/16C 5/16" Hex Magnetic Socket–1/4" Drive

41214 #009-104C 1/4" Hex Magnetic Nutsetter

41198 #009-105C 5/16" Hex Magnetic Nutsetter

AP PRODUCTS POWER BITS

FOR MOBILE HOMES • RVs • HOME SHOP

Refills for the Power Bits display. Individually carded.

4178941790 41791 41792 41793 4181341812 4119841214

JT&T E-Z WIRE STRIPPER TOOL

Multi-function, self-adjusting stripper with cutting and crimping actions. 9" long. Cushion grip han-dles easily cut and strip 26-10 AWG wire, and crimp insulated and non-insulated terminals.

46194

E-Z Wire Tool

#5008F

6

JT&T ECONOMY CRIMPING TOOL

Cushion grip handles gives you the cutting edge. 10" L, cuts wire, strips 22-10 AWG wire, crimps insulated terminals including 7mm ignitionterminals and cuts/rethreads machine screws.

11016

Crimping Tool

#5002F

6

AP PRODUCTS

RV/MH MAGNETIC TIP SCREWDRIVER KIT

Kit 41817 contains #1 & #2 square recess, 5/32" clutch, #2 Phillips and #8-10 slotted bits; overall length 79⁄16".

41817 Square Recess/Clutch/Phillips/Slotted Kit

#009-RVM5IN1A 5

2-PIECE NUT SETTER SET

Magnetic with 1/4" hex shank; 1 7/8" overall length. Contains one 1/4" hex opening with7/16" socket body diameter and one 5/16" hex openingwith 1/2" socket body dia.

48627 Nut Setter Set #009-MNS-2C 5

PHILLIPS POWER BIT,1/4" HEX SHANK

For use with a quick release chuck adapter. Superior driving strength. Hydra-formed™ milled style tips. Carded.

49871 31/2" Powerbit, #2 Phillips, 1/4"

#009-44P2C 10

BITS • TOOLS

In Section G: Tools Fasteners Window Screen Door Hardware Locks Baggage Door Cabinet Shelf & Table Tie Downs Trim/Molding Seals Gutter

G

220

◆

Not UPS-able;

▲

Hazmat terms apply;

LS

Limited Supply

HARDWARE & TOOLS

AP PRODUCTSMAGNETIC NUT SETTERS

Tapered and non-tapered head magnetic nut setters. The first dimension is head size;the second is length.

Magnetic Nutsetter

41213

1

/

4

" x 1

7

/

8

" Tapered

#009-MSHB1/4C

10

41214

1

/

4

" x 1

7

/

8

" Non-Tapered

#009-104C

10

41215

LS

1

/

4

" x 2

9

/

16

"

#009-134C

10

41198

5

/

16

" x 1

7

/

8

" Non-Tapered

#009-105C

10

41199

LS

5

/

16

" x 2

9

/

16

" Non-Tapered

#009-135C

1

POWER BIT

1

15

/

16

" long bit for use in power screwdriversor electric drills. Individually carded.

41794

#3 Square Recess Power Bit

#009-250QB3PC

10

SHANK & SOCKET NUT SETTERS

41221

1

/

4

" Hex Drive Shank 4" L, Pin Lock

#009-250SH1/4-4C

1

41812

1

/

4

" Drive,

1

/

4

" Hex Socket, Tapered

#009-250MST1/4C

10

41813

1

/

4

" Drive,

5

/

16

"

Hex Socket, Straight

#009-250MS5/16C

1

KWIKCUT PLASTIC PIPE & CONDUIT CUTTER

Kwikcut cuts flexible pipe up to 1

1

/

4

" I.D. and semi-rigid pipe and conduit up to 1" I.D. with surgical quality stainless steel blades.

21706

Pipe Cutter

#740125A

1

4181341812

41213

41794

41221

AP PRODUCTS SCREWS

TEKS

®

HEX WASHER HEAD SCREWS

(Not for sale in Canada)

Case-hardened steel, self-drilling, self-tapping sheet metal screws.

#8 Hex Washer Head Screws, Pk/100:

43320 #8 x 1/2" #012-DP100 8X1/2 1

#8 Hex Washer Head Screws, 500/Pkg.

41834 #8 x 3/4" #012-DP500 8X3/4 1

41835 #8 x 1" #012-DP500 8X1 1

41836 #8 x 1 1/2"#012-DP500 8X1-1/2 1

#10 Screws with 5/16" Hex Head, Pk/100:

41263 #10 x 5/8" #012-DP100 10X5/8 1

41264 #10 x 3/4" #012-DP100 10X3/4 10

41265 #10 x 1" #012-DP100 10X1 1

41266 #10 x 11/2"#012-DP100 10X1-1/2 1

Hex Washer Head Screws, Box/100:

41206 #8 x 1/2" #012-TR100 8X1/2 1

41207 #8 x 3/4" #012-TR100 8X3/4 1

41208 #8 x 1" #012-TR100 8X1 1

41209 #8 x1 1/4" #012-TR100 8X1-1/4 1

41210 #8 x 1 1/2" #012-TR100 8X1-1/2 1

Hex Washer Head Screws, Pk/500:

41202 #8 x 1" #012-TR500 8X1 1

41203 #8 x 1 1/4" #012-TR500 8X1-1/4 1

41204 #8 x 11/2" #012-TR500 8X1-1/2 1

41994 License Plate Bolts & Nuts, Box/100#41994 PKG/100 1

HEX WASHER HEAD TRAILER SCREWS


The sheet metal screw primarily for use in the RV/MH industry. 1/4" hex washer head. Zinc.

41208

LICENSE PLATE BOLT

Box of 100. Rust-resistant1/2" washer head licenseplate bolt with hex nut.

Package of 500 Sq. Recess Pan Hd. Screws:41830 #8 x 3/4" #012-PSQ500 8X3/4 141831 #8 x 1" #012-PSQ500 8X1 141832 #8 x 1 1/2"

#012-PSQ500 8X1-1/2 1

42354 #8 x 3/4" #012-PSQ50 8X3/4 142335 #8 x 1" #012-PSQ50 8X1 142340 #8 x 1 1/2" #012-PSQ50 8X1-1/2 1

Square Recess Flat Screws, Pk/50:42342 #8 x 1 1/4" Zinc

#012-FSQ50Z 8X1-1/4 142298 #8 x 1 1/2" Zinc

#012-FSQ50Z 8X1-1/2 142299 #8 x 2" Zinc

#012-FSQ50Z 8X2 142349 #8 x 2 1/2" Zinc

#012-FSQ50Z 8X2-1/2 142351 #8 x 3" Zinc

#012-FSQ50Z 8X3 1

40156 Multi-Use Tool Kit with Case and Electrical Accessories #83475 4

SQUARE RECESS PAN HEAD SCREWS


This is a commonly used steel sheet metal screw inthe RV/mobile home industry.

41831

42298

SQUARE RECESSSCREWS

(Not for sale in Canada)Square Recess Pan Screws, Zinc, Pk/50:

69-PIECE TOOL SET WITHCARRYING CASE AND ELECTRICAL ACCESSORIES

69 tool pieces include: • 3m/10ft. tape measure with belt clip • Wire stripper • 10-pc. wrench set (6 English, 4 metric) • Utility knife • Driver with 20-bit set • Utility scissors with gripper • 30-pc. socket set;• Adjustable wrench • Wire brush • Needle nose pliers and • Small wire cutter. Tools fit neatly into plastic carrying case,14" W x 14.5" H (handle folded) x 3" D; opens to 28-1/4" wide. Also included: 1 roll of electrical tape, 46-pc. electrical terminal kit, and 150 assorted colors and sizes of wire ties.

BITS • TOOLS • SCREWSIn Section G: Tools Fasteners Window Screen Door Hardware Locks Baggage Door Cabinet Shelf & Table Tie Downs Trim/Molding Seals Gutter

G

6

= Std. Carton Qty.

221

HARDWARE & TOOLS

Screw Covers:

45186

Black, Pk/14

#20385

24

45187

Brown, Pk/14

#20395

24

45188

Chrome, Pk/14

#20405

24

45185

White, Pk/14

#20375

1

JR PRODUCTSPLASTIC ROSETTES

Commonly found in use with ceiling panels but can also be used anywhere a decorative lookis desired. Their larger diameter gives the screw more surface coverage and a more secure application. Includes mounting screws.

Plastic Rosettes, with #6 x 1” mounting screws:

45192

Clear, Pk/14

#20465

24

45191

White, Pk/14

#20455

24

Designed to offer a decorative appearance anywhere you need to use a screw down application. These patented screws use a special screw that allows the cover to snap directly to it. It also uses a smaller cap togive your project a cleaner look.

Kappet Screw with Cover:, Pk/14

45190

Beige

#20425

24

45189

White

#20415

24

JR PRODUCTSSCREW COVERS

Decorative Screw Covers can be used anywhere you need to secure an item with a screw but desire a clean finished look. These units use a collar that the screw is inserted through and then when the application is completed, the cover is snapped into place. These caps are removable for easy access.

45185

45186

45187

45188

45191

45192

4518945190

JR PRODUCTSKAPPET SCREWS WITH COVERS

RV DESIGNER SCREW COVERS

Plastic washer & cap system covers screw & bolt heads for a finished look. 5/8" diameter, fits screws up to #12 & bolts up to 1/4". Screws NOT included. Pk/14.

46180

Black

#H603

1

46181

Brown

#H605

1

46182

Chrome

#H607

1

46179

White

#H601

1

With center hole for #6 screw.

Rosette Washers with #6 Screws, Pk/14:

46183

Clear

#H611

1

46184

White

#H613

1

RV DESIGNER“DASHBOARD” SCREWS WITH CAPS

Blister card. Pk/14.

“Dashboard” Screws with Caps:

48276

Beige

#H619

1

48277

White

#H618

1

46179

46182

4618146180

4618346184

RV DESIGNERPLASTIC ROSETTE WASHERS

48276

48277

FABRIC-TO-FABRIC SNAP KIT

For adding a snap attachment to any fabricsuch as tarps, awning material or curtains.

45342

Snap Kit, Pk/6

#81575

24

FABRIC-TO-WALL SNAP KIT

For adding a snap attachment to any fabric or material where they are fastened to a wall or solid structure such as screen rooms, interior curtains, or security straps.

45343

Snap Kit, Pk/6

#81585

24

TURN BUTTONS

These are used to add attachment units to any fabric or material. Commonly used to attach screen rooms to your RV and also found in windshield covers, drapery, and privacy curtains. Easily installed without the use of special tools.

45344

Turn Buttons (Complete Set), Pk/4

#81595

24

HD SNAP INSTALLATION TOOL KIT

This is a HD snap installation tool kit. Not to be confused with the throw away style found included in many kits. This unit will last a lifetime and provide a professional installation of your snap attachments.

43253

Tool Kit, Packaged

#81565

24

GOLD COAST by CAMCOMOVEABLE GROMMETS

Handy tie-down devices easily let you attach a rope or line to tarps, screen rooms, covers or wherever you need it. 4-pack.

48155

Moveable Grommets

#45461

6

4534245343

JR PRODUCTSSNAP KITS

45344 43253


SCREWS & FASTENERS • WASHERS • GROMMETS

G

222

◆

Not UPS-able;

▲

Hazmat terms apply;

LS

Limited Supply

HARDWARE & TOOLS


Repair tarps, boat covers and bimini tops quickly and easily with this handy snap kit. 73 pc. with heavy duty canvas snap pliers.

14338

Canvas Snap Kit (73Pcs)

#50048258

6

Canvas Snap Repair Kit: For repairing canvas covers, tarps, boat covers, sail covers or any heavy fabric. Kit includes 1 metal snap tool and die set, 6 wood screw studs #8 x 5/8", 10 caps, 10 sockets, 10 studs and 10 eyelets.

14821

Fastener Kit

#50048250

6

44024

Clip & Stay

#A30-0400

12

COGHLAN’SSNAP GROMMETS

Can be installed in canvas or plastic sheets without special tools. 8/Card.

40255 Snap Grommets#706 12

SEASENSECANVAS SNAP KIT

SEASENSE CANVASFASTENER KIT

VALTERRACLIP & STAY

Clip and Stay combines a unique patented design with a tough ther-mal plastic rubber to create " Grip-Action". Hang anything up to 10 lbs and the "Grip-Action" prevents clips from sliding and bunching up! Simply insert the clips into the spare channel of your awning tube and you're ready to hang party lights, clothesline, birdfeeders, signs, flashlights and all sorts of camping gear. Pkg/10.

THETFORD ADHESIVE MOUNTING DISCFOR STAYTION™ ACCESSORIES

• Allows Thetford Staytion™ Accessories to Mount Anywhere. • Perfect For Textured Sur-faces, Laminated Walls, Wood Surfaces and More! • 3M-Grade Adhesive, Strong Holding Power. • Blister Card Packaging. • Pkg. Dim.: 6” H x 4” W x 1/4” D. • Product Dim.: 2.5” Dia.

40722 Adhesive Mounting Disc#36761 24

Grips Tight! Quick Release!

THUMB LOCK “GRIP” FASTENERSThumb Lock is a strong, durable, easy to use fastening system that quickly secures portable TVs, computers, and countless other objects at risk from falling on boats and RVs. Quick-release locks open easily to release and reattach equipment. Fasteners attach with industrial strength 3M peel &press adhesive pads, which attach easily and bond strongly to mostnonporous materials. Mounting holes allow the fasterners to be screw-fixedfor added strength or to surfaces not suitable for adhesive attachment.

TV GRIPS

Two-corner kit designed for 13" TV or similar size equipment. Holds laptops and countertop appliances safely and securely. Safe on finished wood wood and equipment. Fastener size: 1" x 1".

41318 TV Grips, Black #MRV-100BK 10

41317 TV Grips, White #MRV-100WT 10

SUPER GRIPS

Quick-release fasteners for TVs, microwaves, personal computers. Many times stronger than shock cord or hook & loop fasteners. Two-corner kit holds 13" TV/VCR model or similar size equipment. Fastener size: 1" x 2".

45138 Super Grips, Black #MRV-200BK 10

45139 Super Grips, White #MRV-200WT 10

MAX GRIP

A heavy-duty fastening system for large TVs. Patented design prevents strap slippage. A single Max Grip TV kit provides two-corner attachment for TVs up to 19". It includes a safety tether that prevents the unit from pitching forward. For larger 27" and 32" units, two kits are recommended. Fasteners size: 2" x 3".

46408 Max Grip, Black #MRV-630BK 5

ADHESIVEREPLACEMENT PADS

3M adhesive replacement pads. Cut-to-size pad for (4) Super Grips or (8) TV Grip fasteners. Includes alcohol cleaning pads.

45144 Adhesive Pads #MRV-RP2 10

EXTRA LENGTH STRAP

A 48" length of locking strap for safety tethers and countless strap & fastening applications using TV Grips and Super Grip fasteners. Cut-to-size with scissors.

45141 48" Strap, Black#MRV-48BK 10

GROMMETS • FASTENERS

G

6

= Std. Carton Qty.

223

HARDWARE & TOOLS

45350

Curtain Rings, Pk/12

#81665

24

RV DESIGNER METAL SHOWER CURTAIN RINGS

46601

Metal Shower Curtain Rings

#A403

1

41773

Shower Door Catch, CD/2

#H577

1

40476

Shower Latch

#C9727SS

5

Pleated Shade Rail Ends, Clam Shell, Pk/2:

43961

Oyster

#A320

12

43959

LS

Tan

#A319

12

JR PRODUCTSMETAL SHOWERCURTAIN RINGS

Made of durable zinc plated steel for lasting use and spring loaded. Used forany type of curtain such as shower, privacy, and window coverings.

RV DESIGNERSHOWER DOOR CATCH

SHOWERDOOR LATCH

Stainless steel shower door latch. 1/pkg.

RV DESIGNERPLEATED SHADE RAIL ENDS

43959

43961

45326

End Stop, Pk/2

#81195

24

FOR USE WITH TRACK TYPE "B"

46262

I-Beam End Cap, Pk/2

#81835

24

FOR USE WITH TRACK TYPE "C"

45327

End Stop, Pk/2

#81205

24

FOR USE WITH TRACK TYPE "D"

45336

White, Pk/2

#81385

24

FOR USE WITH TRACK TYPE "E"

45339

Brown, Pk/2

#81475

24

45338

White, Pk/2

#81465

24

JR PRODUCTSPOCKET DOOR TRACK

Used to replace your damaged or worn tracking and is designed to be used with our Sliding Door Hanger (Coast#43205). It is suggested that the door hangers be replaced when new trackis installed to guarantee a proper fit.

44981

6’ Pocket Door Track

#20675

1

JR PRODUCTS END STOPS

FOR USE WITH TRACK TYPE "B"

Designed to fit all versionsof I-Beam curtain tracks. Some styles of this track are made with a rounded bottom track which will not accept the standard End stop, this unit is adjustable and will work with all Type B I-Beam Curtain Tracks.

45339

45336

45327

46262

JR PRODUCTS END STOP/CAP 45338

CEILING TRACK FOR GLIDE-TAPE 45"

Use with GLIDE-TAPE (A115). Pk/1.

40785

45"

#A201

36

WALL TRACK FOR GLIDE-TAPE 45"

Use with GLIDE-TAPE (A115). Pk/1.

40786

45"

#A202

36

WALL BRACKET FOR "I" BEAM TRACK

40788

Wall Bracket, Pk/2

#A204

1

CEILING BRACKET FOR "I" BEAM TRACK

40787

Ceiling Bracket, Pk/2

#A203

1

END STOP FOR "I" BEAM TRACK

40789

End Stop, Pk/2

#A205

1

PLEATED SHADE HOLD DOWNS

45979

Pleated Shade Hold Downs, Pk/2

#A311

1

SNAP KIT WITH TOOLS

Each kit contains 6 complete fastener sets plus attaching tools. Use A304 to snap fabric items to a wall or rigid material. Use A306 to snap 2 fabric items together.

45492

Fabric to Wall

#A304

1

45493

Fabric to Fabric

#A306

1

TURN BUTTONS

Use for curtains, canvas covers, etc.

45978

Turn Buttons, Pk/4

#A308

1

RV DESIGNER COLLECTIONWINDOW COVERING ACCESSORIES

40785

40786

40788

40787

4078945979

45492

45493

45978


SHOWER & CURTAIN ACCESSORIES

G

224

◆

Not UPS-able;

▲

Hazmat terms apply;

LS

Limited Supply

HARDWARE & TOOLS

45303

JR PRODUCTS TRACKS &ACCESSORIES

45304

"I" BEAM CURTAIN TRACK – Type “B”45303 48" Aluminum Track #80241 142116 NEW! 96" Aluminum Track

#80251 1

"I" BEAM CURTAIN TRACK SPLICE – For use with track Type "B"

45304 Curtain Track Splice, Metal, Pk/1#80265 1

45307 Wall Track, Brown, 48”#80321 40

45308 Wall Track, White, 48”#80341 40

48801 NEW! Wall Track, Brown, 96”#80331 40

48802 NEW! Wall Track, White, 96”#80351 40

WALL MOUNTED INTERNAL

SLIDE TRACK – Type "C"

45316 Wall Track, Brown, 48”#80501 45

45315 Wall Track, White, 48”#80481 45

48808 NEW! Wall Track, Brown, 96”#80511 45

48807 NEW! Wall Track, White, 96”#80491 45

WALL TRACK FOR SNAP TAPE –

Type "E"

CEILING TRACK FOR SNAP TAPE–

Type "E"

45314 Ceiling Track, Brown, 48”#80461 20

45313 Ceiling Track, White, 48”#80441 20

48806 NEW! Ceiling Track, Brown, 96”#80471 20

48805 NEW! Ceiling Track, White, 96”#80451 20

CEILING MOUNTED INTERNAL SLIDE TRACK – Type "C"

45306 Brown, 48” #80301 40

45305 White, 48” #80281 40

42306 NEW! Brown, 96” #80311 142122 NEW! White, 96” #80291 1

45324

45325

For use with track Type "B".

45324 Wall Bracket, Pk/2 #81175 24

45325 Ceiling Bracket, Pk/2 #81185 24

WALL & CEILING BRACKETS

45311

45312

WALL TRACK ONLY FOR 1/2" SLIDE TAPE – Type “D”

45311 White, 48” #80391 30

42592 NEW! White, 96” #80401 1

WALL TRACK & SLIDE TAPE KIT

This kit comes complete with 48" of Type "D" wall track and 72" of slide tape.

45312 Track Kit, White, Packaged#80415 14

45309

45310

CEILING TRACK ONLYFOR 1/2" SLIDE TAPE – Type “D”

45309 White, 48” #80361 20

42510 NEW! White, 96” #80371 1

CEILING TRACK & SLIDE TAPE KIT

The kit comes complete with 48" of Type "D" ceiling track and 72" of slide tape.

45310 Track Kit, White, Packaged#80385 14

45335

45317

ALUMINUM CURTAIN/DOOR TRACK – Type “A”

.568" w x .361" h with 28" opening.

48800 NEW! 96" Aluminum Track#80201 40

48800

NEW!

JR PRODUCTS CURTAIN TAPES

SEW-IN CURTAIN SLIDE TAPE

For use with track Type "D".

45335 72" Tape, Packaged

#81365 36

SEW-IN SNAP TAPE

For use with track Types: A, C, & E. Use nylon webbing for easier installation. No shrinkage or tearing caused by sun orheat exposure.

45317 72" Snap Tape, Packaged #81005 36

48809 NEW! 100 Yards Tape, Bulk #81015 1


WINDOW COVERING HARDWARE

G

6

= Std. Carton Qty.

225

HARDWARE & TOOLS

45329

Small Curtain Carrier, Pk/14,

For use with track Type "C"

#81265

24

45318

Large Curtain Carrier, Pk/14,

For use with track Type "A"

#81065

24

45330

Elastic Curtain Carrier, Pk/14,


#81275

24

45331

Sew-In Curtain Carrier, Pk/14,


#81285

24

45319

Snap-In Curtain Carrier, Pk/14,

For use with track Type "A". To be used with our Snap Tape Part # 45317

#81075

24

45337

Snap-In Curtain Carrier, Pk/14,

For use with track Type "E". To be used with our Snap Tape Part # 45317

#81455

24

45320

Sliding Eye Curtain Carrier, Pk/14,

For use with track Type "A"

#81085

24

45333

Sliding Eye Curtain Carrier, Pk/14,


#81305

24

45332

Curtain Carrier, Pk/14,


#81295

24

45341

Draw Cord Curtain Carrier, Pk/14

, Used with any curtain track with a 1/4" channel. Normally used with units that use a cord to retract and extend the curtains

#81555

24

45321

Wheeled Curtain Carrier w/Hook, Pk/14,

For use with track Type "B"

#81155

24

45322

Wheeled Curtain Carrier w/Ring, Pk/14,

For use with track Type "B"

#81165

24

45328

Elastic Sew-In Curtain Carrier, C-shaped,Pk/14, For use with track Type "C". Commonly used with Airstream

products

#81255

24

JR PRODUCTS CURTAIN CARRIERS

45329

45318

45330

45319

45331

45320

45337

45333

45341

45332

4532245321

45328

12" MINI-BLIND WAND

Universal replacement for most mini blind applications.

45345

12” Mini Blind Wand

#81605 1

HOLE-STYLE MINI BLIND HOLD-DOWN

Used to secure the bottom rail of most mini blinds that have a post mounted in it to clip in to the hold down. Made of durable metal for universal applications.

45346 Hold-Down, Pk/2 #81625 24

POST-STYLE MINI BLIND HOLD-DOWN

Used to secure the bottom rail of most mini blinds that have a small hole located in the end caps. Made of flexible plastic for universal applications.

45347 Hold-Down, Pk/2 #81635 24

HOOK-STYLE MINI BLIND HOLD-DOWN

Used to secure the bottom rail on any mini blind with a post protruding from the end cap. Made of zinc plated steel for extra security and longevity.

45348 Hold-Down, Pk/2 #81645 24

BLIND QUIETER

One inch square dense foam pads can be used anywhere two objects come into contact with each other such as between mini blinds and the wall, counter extensions or folding shelves, or doors to stop noise and wear caused while trav-eling. Each unit is self-adhesive and comes in a charcoal finish to blend in with your application. They can be modified to fit anywhere needed.

45349 Blind Quieter, Pk/4 #81655 24

PLEATED SHADE HOLD-DOWN

Used to secure the tension cords of your pleated shades. Includes spacer and attaching screw to repair or replace any extended hold-down unit.

45351 Pleated Shade Hold, Pk/2#81705 24

45345JR PRODUCTS BLIND ACCESSORIES

45347

45346

45348

45349

45351

44888 Pleated Shade Hold Downs, Blister Pack, 3” W x 5” H x 1” D, Pk/2

#A312 84

43958 Pleated Shade Hold Downs, Clam Shell, Pk/2 #A313 12

Pleated Shade Knob, Pk/4:41778 Oyster #A317 141776 Tan #A315 1

RV DESIGNER TIEBACK STRAP

Clear plastic strap, 3/4" wide x 18" long with screw fastener at one end and snap fastener at the other. Use as a holdback for folding doors, curtains, etc. May be cut to desired length.*

40455 Curtain Tieback Strap 18", Clamshell Pack #A750 1

RV DESIGNERSIDE CURTAIN HOLD DOWN

Clamshell packaging, 3” W x 5” H x 2” D.

44885 Side Curtain Hold Down, Pk/2#A285 72

45340 Drape Hook, Pk/14 #81545 24

44888

43958

RV DESIGNER PLEATED SHADE HOLD DOWNS

41776

41778

RV DESIGNERWINDOW COVERINGHARDWARE

Replace worn pleated shade knobs.

40455

44885

JR PRODUCTS DRAPEHOOK



G

226 ◆ Not UPS-able; ▲ Hazmat terms apply; LS Limited Supply

HARDWARE & TOOLS


2 WHEEL CARRIER #1

Use with I beam Track (A208). Pk/14.

40770 2 Wheel Carrier #1 #A101 1

LARGE SLIDING EYE CARRIER #2

Use with Drape Hooks (A113). Pk/14.

40771 Large Sliding Eye Carrier #2#A102 1

SMALL SLIDING EYE CARRIER #3

Use with Internal Slide Track (A206 or A207) & Drape Hooks (A113). Pk/14.

40772 Small Sliding Eye Carrier #3#A103 1

SNAP CARRIER #4 3/4"

Use with Snap Tape (A114). Pk/14.

40773 Snap Carrier #4 3/4" #A104 1

"INTERNAL" SNAP-CARRIER

Use with Internal Slide Track (A206 or A207) & Snap Tape (A114). Pk/14.

40774 "Internal" Snap Carrier #A105 1

"OVERHEAD" SNAP CARRIER #5

Drapes snap in. Pk/14.

40775 "Overhead" Snap Carrier#A106 1


40770

40771

40774

40775

40772 40773

LARGE SEW-IN CARRIER #6

40777 Sew-In Carrier #6, Pk/14#A107 1

SMALL SEW-IN CARRIER #7

Use in GMC Motorhomes.

40778 Small Sew-In Carrier, Pk/14#A108 1

2 WHEEL CARRIER WITH HOOK #8

Use with I beam Track (A208).

40779 2 Wheel Carrier with Hook #8, Pk/14#A109 1

CORD DRAW CARRIER #10

40780 Cord Draw Carrier #10, Pk/14#A110 1

"AIRSTREAM" DRAPE CARRIER

Use with Internal Slide Track (A206 or A207).

40781 "Airstream" Drape Carrier, Pk/14#A111 1

STAINLESS STEEL DRAPE HOOKS

Stainless steel prevents rust spots on drapes.

40782 Stainless Steel Drape Hooks, Pk/14#A113 1


4077840777

40779

40780

40781

40782

SNAP TAPE

Use with snap carriers (A104, A105 or A106). 72".

40783 Snap Tape #A114 48

GLIDE-TAPE #9

1/2" Glides. Use with Ceiling or Wall Mount Curtain Track (A201 or A202). 72".

40784 GLIDE-TAPE #9 #A115 48

CAMPER TABS

45976 Camper Tabs, Pk/14#A118 1

END CAPS FOR GLIDE-TAPE

46599 End Caps for GLIDE-TAPE. Pk/2#A135 1

CURTAIN KIT

45" track with end caps & 72" GLIDE-TAPE.

40796 Ceiling Mount #A501 24

40797 Wall Mount #A502 24


40783

40784

45976 46599

40796 40797

40795

45482

45977

4079445980

RV DESIGNERMINI BLINDHARDWARE

MINI BLIND RAIL ENDS

Use with Hold Down A302 or A301. Pk/2.

45977 Mini Blind Rail Ends #A300 1

BLIND QUIETER

Stick to window frame. Cushy neoprene reduces rattling. Special adhesive keeps in place. Pk/6.

45980 Blind Quieter #A321 1

MINI BLIND HOLD DOWNS40794 Mini Blind Hold Downs, Pk/2

#A301 1

MINI BLIND HOLD DOWNS - HOOK

Use with rail end A300. Pk/2.

45482 Mini Blind Hold-Downs - Hook#A302 1

MINI BLIND WAND40795 10" #A303 1


G

6 = Std. Carton Qty. 227

HARDWARE & TOOLS

DAY/NIGHT SHADE HOLD DOWN

The flush mount day/night shade hold-down is used to secure the tension cords on your shade. Comes complete with replacement screws to replace or repair any day/nightshade hold-down.

43254 Clear Hold Down, Pk/2#81735 24

HD SNAP INSTALLATION TOOL KIT

This is a HD snap installation tool kit. Not to be confused with the throw away style included in many kits. This unit will last a lifetime andprovide a professional installation of your snap attachments.

43253 Tool Kit #81565 24

Blind Knob, Pk/4:

44985 Brown #81825 24

44984 White #81815 24

For use with track Type "C". Our new nylon woven curtain tape is an excellent way to add curtain carriers to your project. The plastic carriers are heat bonded to the woven ape fora long lasting application and are more secure than direct sew-in installations. The nylontape will not shrink or discolor and is more like the fabric it is being sewn to for a moreprofessional look.

44983 72" Sew-In Slide Curtain Tape, Packaged #81355 36

JR PRODUCTSCURTAIN &WINDOW HARDWARE

4325343254

4498444985BLIND

KNOBS

Will replace any broken or damaged single screw knobs found on most day/night, pleated or hand operated shades. Made of durable polypropylene for years of use.

JR PRODUCTSSEW-IN SLIDE TAPE

For use with track Type "B". Newly designedceiling bracket for the aluminum I-Beam curtain track, which was made for a quicker installation and more appealing to the eye. Simply mark the ceiling where you want the track to run, decide where the best possible placement of the brac-kets will be, and mount with the supplied screws. Then snap the track into place for that profes-sional look. No pre-assembly required. Will work with most brands of I-Beam curtain tracks.

44982 Ceiling Bracket, Pk/2, White#81145 24

These are used to add attachment units to any fabric or material. Commonly used to attach screen rooms to your RV and also found in wind-shield covers, drapery, and privacy curtains. Easily installed without the use of special tools.

87485 Replacement Turn Buttons only, Pk/18#81805 24

41365 Stanley Latch, RH #1298CR 10

41366 Stanley Latch, LH #1298CL 10

ROUND TORQUE BAR41370 Torque Bar, 1/2" x 48", Each

#756PY 1

42469 Torque Bar Arm #785P 5

42458 1/2" Plastic #738P 142497 LS 1/2" Metal #845P 1

JR PRODUCTSSNAP-IN CEILING BRACKET

JR PRODUCTSTURN BUTTON

STANLEY LATCH

#1298 Stanley Latch. Holes are 7/8" on centers. Specify RH or LH. One per card with screws.

PHILIPS TORQUEBAR ARM

4249742458TORQUE BARBEARINGS

Torque BarBearing:

• One Exterior & one Interior entry door frame, assembled with Glass & screws installed.• Measures 12” wide x 21” high. • Easy to replace, no special tools required.• Other colors available: Nu Tru White, Ivory and Brown via special order.

69846 RV Door Glass With Black Frame,12”x21” #A77051 1

Replace your RV's interior and/or exterior entrance door window frames with exactfactory authorized replacement parts! Quick & easy installation; no special tools required.Note: Glass window is held in position by frames only! Beware of sharp edges on glass during replacement process. Glass & replace-ment screws sold separately. Overall framedim.: 15-3/4" x 24-3/4". Glass dim.: 12'W x 21"H

Exterior Window Frame: 65572 Nu Tru White #A77006 1

65573 Ivory #A77007 1

65574 Black #A77008 1

65575 Brown #A77009 1

Interior Window Frame: 65576 Nu Tru White #A77010 1

65577 Ivory #A77011 1

65578 Black #A77012 1

65579 Brown #A77013 1

OP PRODUCTS RV DOOR GLASS WITH BLACK FRAME, 12”X21”

Exterior

OP PRODUCTSEXTERIORAND INTERIORWINDOW FRAMES

Interior


WINDOW HARDWARE

G

228

◆

Not UPS-able;

▲

Hazmat terms apply;

LS

Limited Supply

HARDWARE & TOOLS


44326

Beige, 1/2" Shaft

#H718

1

44336

Beige, 1" Shaft

#H719

1

46190

Black, 1/2" Shaft

#H711

1

46191

Black, 1" Shaft

#H713

1

46231

White, 1/2" Shaft

#H715

1

46232

White, 1" Shaft

#H717

1

RV DESIGNER CRANKS

PLASTIC WINDOW CRANK

Black plastic window crank. Bolt included, Pk/1.

46185

1" Shaft

#H701

1

46186

1-3/8" Shaft

#H703

84

46187

1-3/4" Shaft

#H705

1

METAL WINDOW CRANK

Metal windows crank. Bolt included, Pk/1.

46188

1" Shaft

#H707

1

46189

1-3/4" Shaft

#H709

1

Metal Crank, Bulk:

42473

D = 3-1/2"

#796P

25

Plastic Crank, Black, CD/1:

46142

D = 2-1/2"

#771C BLK

10

46146

D = 3-3/16"

#712C BLK

10

Plastic Crank, Black, Polybag:

46147

D = 1-3/8"

#748P BLK

25

40602

D = 1-3/4"

#881P BLK

25

46149

D = 2-1/4"

#750P BLK

25

46141

D = 2-1/2"

#771P BLK

25

46145

D = 3-3/16"

#712P BLK

25

RV DESIGNER WINDOW KNOBS

Plastic 2-1/4" knob. Bolt included, Pk/1.

WINDOW CRANKS

D

Window and vent operator knob replacement will fit most applications. Made of durable polypropylene. Replacement screw included.

Plastic 2-1/4” knob, Pk/1:

45184

Black, 1/2” Shaft

#20365

36

45182

Black, 1” Shaft

#20345

1

45183

White, 1/2” Shaft

#20355

36

45181

White, 1” Shaft

#20335

36

Plastic Window Crank w/screw, Packaged:

45152

1"

#20205

1

45165

1-3/8"

#20215

24

45172

1-3/4"

#20225

24

Metal Window Crank w/screw, Packaged:

45177

1"

#20265

24

45178

1-3/4"

#20275

24

Strybuc nylon screen clips with screws. Clear White. 6/card.

41044

Clips, Flush Type

#492C

10

41178

Clips, 1/4" Offset

#496C

10

42451

Clips, 7/16" Offset

#499C

10

JR PRODUCTSWINDOW KNOBS 45181

45182

JR PRODUCTSCRANKS

PLASTICWINDOW CRANKS

Made of durable polypropylene for long lasting use. Replacement screw included.

METAL WINDOW CRANKS

Made of die caststeel for long lasting use. Replacement screw included.

45178

45177

STRYBUC NYLON SCREEN CLIPS

4104441178 42451

41367

Right Hand Operator

#715PR

5

Side Mount Operator, 1/2” ID hole, 1/Card:

41081

1/4" Hub Projection, Right Hand

#1712C

10

41085

1/2” Hub Projection, Right Hand

#1716C

10

41087

11/16” Hub Projection, Right Hand

#1718C

12

STRYBUC REPLACEMENTOPERATORS

Slant sill side mount operator, 3/8" square with 1/4" hub projec-tion. 1/bag.

Philips side mount operator. 1/2" ID hole, with 3/16" hub projection. 1/card.

41045 Right HandOperator

#735C 10

Side Mount Torque Operator:41052 Left Hand (opposite of pictured) #762C 10

41051 Right Hand (pictured)#761C 10

Slant sill side mount torque operator. 1/2" ID hole with 3/16" hub projection. 1/card.

Small side mount operator. 1/2" ID hole with 5/8" hub projection. 1/bag.

41371 Side Mount Operator, Right Hand

#758PR 10

Philips side mount operator. 1/2" ID hole with 11/16" hub projection. 1/card.

Small Philips Operator: 41056 LS Left Hand (opposite of pictured)

#787CL 1

41055 Right Hand (pictured)#787CR 12

41081

41087

41085

WINDOW HARDWARE

G

6

= Std. Carton Qty.

229

HARDWARE & TOOLS

40277

Right Hand, CD1

#808CR

10

STRYBUC TORQUE BAR BEARINGS

41357

Nylon Torque Bar Bearing, 1/2" ID x 7/8" H, 1/card

#763C

10

42468

Nylon Torque Bar Bearing for Philips; 1/2" ID x 1-1/16" H, 1/card

#784C

10

41375

Nylon Torque Bar Bearing, 1/2" ID, Each

#1703P

5

41039

LS

Nylon Torque Bar Bearing, 1/2" ID x 3/4" H, 1/card

#1774C

10

Strybuc metal shaft extension with screw. 1/card.

41072

Dim. “D”=1/2"

#831C

10

41073

Dim. “D”=7/8"

#832C

1

41074

Dim. “D”=1-1/8"

#833C

10

41075 Dim. “D”=2" #834C 10

42443 Replacement Spline #310C 10

STRYBUC SIDE MOUNT OPERATOR

Replacement side mount window operator. 1/2" ID hole, 1/2" hub projection.

41357

41375

42468

41039

D=13/16" shaft, 1/card.

41077 Tee Handle #837C 10

DSTRYBUC PLASTIC TEE HANDLE WITH SCREW

SHAFT EXTENSIONS

STRYBUC REPLACEMENT SCREEN SPLINE

Hollow round black replacement spline for metal and fiberglass screening. 5/32" x 20 ft. 1/card.

Exact replacement for Amerimax style doors and can also be used on other styles as a replace-ment. The latch location is determined by looking at the closed door from inside your RV. The latch location is the side of the door that it is mounted on. This would mean that a right hand latch will be mounted on the right hand side of the screen door as you view it from inside the RV.

Screen Door Latch, w/mounting screws, Pk/1:45093 Right Hand #10765 18

45094 Left Hand #10775 18

AP PRODUCTSEXIT WINDOW LATCH61423 Exit Window Latch, Bag/1

#013-242 10

• Universal. • Secures the screen door to the entry door. • Direct replacement. • Mounting screws included.

45095 Bullet Screen Door Latch, Packaged#10785 24

45093

45094

JR PRODUCTSSCREENDOOR LATCHES

NEW!

NEW!

JR PRODUCTSBULLET SCREEN DOOR LATCH

FITS AMERIMAX AND PHILIPS DOORS

Screen Door Latch, Amerimax/Philips:

40350 Left Hand #E287 12

40349 Right Hand #E285 12

FITS HEHR WINDOW LATCHES

HEHR Window Latch, Clamshell packaging,3” W x 5” H x 1-1/2” D:

44872 Single Pane #H695 48

44883 Double Pane #H697 84

40349

40350

RV DESIGNER SCREENDOOR LATCH

Most RV doorare right hand.

43461

43462

FITS PHILIPS DOORS

Screen Door Latch:43461 Left Hand

#E297 12

43462 Right Hand#E295 12

44872

44883

RV DESIGNERBULLET LATCH40450 Bullet Latch

#E291 48


WINDOW & SCREEN HARDWARE

G


HARDWARE & TOOLS

RV DESIGNER LATCHES

SCREEN DOOR LATCH

Smooth, light gray latch used on screen door for Coleman folding Campers. Locks from inside only. 2-3/8" x 3". All hardware included. Pk/1

65415 Screen Door Latch #E309 36

KNOB-LEVER LATCH SET

Latch has 1-1/2" round knob on one side, 2-1/2" straight handle on other. Often used for bath & interior doors in RVs. Locks from inside only. Fits doors 7/8" to 1-1/8" thick. Silver finish. All hardware included. Clamshell.

41645 Knob and Lever Latch CD/1#H522 36

Exact replacement for Coleman style entry doors and can also replace many entry doors found on fold-down campers. Includes mounting screws.

45096 Screen Door Latch, with mounting screws, Packaged #10795 36

Used on multiple applications including cargo and light entry doors, engine covers or wherever a light security latch is needed. Made of nickel plated steel; includes mounting screws.

45129 Lockable Draw Pull Latch, Packaged#11735 24

JR PRODUCTSCOLEMAN SCREEN DOOR LATCH

JR PRODUCTS LOCKABLE DRAW PULL LATCH

CHROME HOOD LATCH

Used in any application where a cover needs to be secured for travel. This unit is often found on the interior of Class C RV‘s. Packaged.

45102 Chrome Hood Latch, with mounting screws, Pk/1 #10865 24

RUBBER HOOD LATCH

Constructed of zinc plated steel and industrial rubber. Often used for an interior engine cover latch on Class C RV‘s and LP bottle covers on many travel trailers. Packaged.

45103 Rubber Hood Latch,with mounting screws, Pk/1 #10875 24

46171 Engine Compartment Latch, Chrome Finish, Pk/1 #H515 36

48287 Hood Latch, Rubber #E205 48

BULLET LATCH

Screen door latch with easy one-hand operation. Eliminates roller catches and magnets. It’s auto-matic; has positive latching. Will work on most screen doors except Winnebago, Avion, and Airstream doors. CD/1.

48564 Bullet Latch #D0301-00 24

JR PRODUCTS HOOD LATCHES

45102

45103

RV DESIGNER ENGINECOMPARTMENT LATCH

“Hood” latch often used to secure interior engine compartment in motor homes. Also used on cargo & utility carriers. 4" x 2-1/2".

RV DESIGNERHOOD LATCH

Rubber. Clamshell.

CAMCO SCREEN DOOR HARDWARE

DOOR SLIDES

One piece replacement slide for screen doors that are all screen, except for the slide, or for those with the solid second piece.

Door Slide, 9” H x 11.25” W:40075 Beige #45532 640074 Black #45533 648662 NEW! White #45531 6

Door Slide, 12” H x 11.5” W:48605 NEW! Beige #45511 648642 NEW! Clear #45512 648661 NEW! White #45513 6

12" SCREEN DOOR STOP

Designed to fit DPI 12” high screen door slides. A screen door “stop” is required to block the opening between the slide and door frame.Buy when purchasing only the 12” slide.

49473 Beige Stop, 12” H #45541 649474 Clear Stop, 12” H #45542 6

DOOR SLIDE SETS (SLIDE AND STATIONARY)

Will let you see through the entire screen door.

For Screens that measures 24” wide(Slide; Stationary)

9”H x 11.25”W; 9”H x 12.5”W:48669 NEW! Beige #45602 641788 Clear #45601 6

12”H x 11.5” W; 12”H x 13” W:48665 NEW! Beige #45582 641787 Clear #45581 648666 NEW! White #45583 6

For Screens that measures 28” wide(Slide; Stationary)

12”H x 11.5” W; 12”H x 16” W:48667 NEW! Clear #45591 648668 NEW! White #45593 6

12” High Slide Piece

9” High Slide Piece

StationaryPiece

12” Screen Door Stop


SCREEN DOOR HARDWARE

G

6

= Std. Carton Qty.

231

HARDWARE & TOOLS

Deluxe Assist Handle, Packaged:

45260

Black

#48325

1

45259

White

#48315

1

Steel Assist Handle, Packaged:

42249

Chrome

#9482-000-023

30

46855

Powder Coated White

#9482-000-111

1

42653

Chrome Plated Steel Assist Handle

#9482-000-020

32

JR PRODUCTSDELUXE

ASSIST HANDLES

Grip area extended for greater security when

entering your RV. Padded, rubber grip with molded finger area for comfort and safety. Includes plastic base pads for a professional installation.

JR PRODUCTSGRAB HANDLES

Deluxe styled assist handle, chrome or white powder coated finish 93/4"L x 1" W.

Mounting Holes: 9-1/16" on center.

Made of die cast steel

NEW!

• Mounting Holes: 9-1/16" on center. • Made of die cast steel .

Folds and locks to the side of the RV without tools. Locks open to make entering or exiting your RV easier. Ships pre-assembled.

Folding Assist Handle, 14" W x 24" L:

85658

Aluminum tubing with a sparkling silver powder coat finish with black foam grip

#AM-300

6

85657

White with black foam grip

#AM-200

6

87599

Black with black foam grip

#AM-800

6

ILLUMAGRIP™ ACRYLIC ASSIST HANDLE

• 20" long handle. • 1" diameter solid acrylic handle. • Exceeds 400 pound pull test. • Available with 304 stainless steel highly polished finish end caps orin powder coated white ends, in the 4 screw hole style.

Grab Bar, 20" Acrylic, Non-Lighted: 41394 SS High Polished Ends, 2 screw hole style

#86420-SS/OO-ACR 12

46953 White Ends, 4 screw hole style#86420-WH/OO 12

469534 screw hole

style

413942 screw hole

style

STROMBERG CARLSONFOLDING ASSIST HANDLE WITH FOAM GRIP

OP PRODUCTSSCREEN DOOR SLIDES & HANDLES

“E” SERIES SCREEN DOOR SLIDE

This is an exact replacement slide for Elixir screen doors. Easy to replace: no tools required. Exact OEM replacement item. 12-1/8'H x10-3/4"W.

Screen Door Slide, “E” Series, Packaged:

65500

Elixir, Black

#A77016

18

65502

Elixir, Nu Tru White

#A77014

18

“P” SERIES SCREEN DOOR SLIDE

This is an exact replacement slide for Philip's,Creation and other brands of screen doors similar in appearance. Easy to replace: no tools required. Exact OEM replacement item. 11-11/16"H x 11-7/8"W.

Screen Door Slide, “P” Series, Packaged:

62486

Philip, Black

#A77020

18

65504

Philip, Nu Tru White

#A77018

12

“P” SERIES SCREEN DOOR HANDLES

To be used with P Series screen door slides. Replacement handle for all Philip's, Creation and other brands of screen doors similar inappearance. Exact OEM replacement item.

Screen Door Handle, “P” Series, Packaged:

62860

Black

#A77025

24

65505

Nu Tru White

#A77023

24

“P” SeriesHandle

“P” Series

“E” Series

STROMBERGCARLSONFOAM GRIP WRAP

• Installs with out taking your rail apart.• Works on any 1” dia. rail to provide 12” grip.

87266 Foam Grip Wrap #FP-1002-R 6


SCREEN DOOR HARDWARE • GRAB HANDLES

G


HARDWARE & TOOLS

Big Grab Handle, Plastic:

40418 White, 18” #E220 1

Soft Grab Handle, Clamshell:

41782 Black, 18” #E219 48

41783 White, 18” #E216 48

46094 Chrome, 10” #E221 36

8 3/4" Long, Plastic:

40428 Black, 8-3/4” #E223 1

40427 White, 8-3/4” #E222 1

Unique design allows retainer to work when the door is not flush. Can be positioned anywhere on the door. Retains 90% of the original holding force after 50,000 cycles!

Heavy Duty Door Retainer:

45971 LS (Canada only) Polar White#T1005-04C 1

40418

41782

41783RV DESIGNERHANDLES

40428

40427

46094

GRAB HANDLE

Provides hand hold at entry door or RV. 9" hole to hole. Pk/1.

TOPLINEDOOR RETAINER

JR PRODUCTS GRAB HANDLE

An entry door assist handle made of Rovel that is paintable, fade resistant and impact resistant. Easy installation. 103/8" L x 15/8" W.

49779 LS Polar White Grab Handle, Without Light #288-CPW-A 1

Original equipment entry door handles. Made of quality plastic that resists fading, temperature changes, and road acids. Sure grip design and ample hand clearance make this handle perfect for many uses besides entry doors. Easy instal-lation with mounting screws supplied (pkg. only). 9-7/8" overall length; 8-7/8" hole-to-hole.

Entry Door Grab Handle: 65839 Black #482-A-3-A 1

78840 LS Colonial White (Image not available)#482-A-1-A 3

78841 Polar White #482-A-2-A 1

46597 Door Stop #H721 1

43967 Entry door bumper, Black rubber, 1", Blister Card, Each #E228 12

78841

65839

PLASTIC ENTRY DOORGRAB HANDLE

RV DESIGNER DOOR STOP

Plastic door stop with peel & stick adhesive. 2" diameter. White, Pk/2.

RV DESIGNERENTRY DOOR BUMPER - 1”

UNIVERSAL DOOR BUMPER

HD entry door bumper constructed of industrial rubber for a durable application. Can be installed anywhere bumper protection is needed.

Door Bumper, with mounting screws:45090 Black, Packaged #10695 24

45091 White, Packaged #10705 24

RAMP BUMPER

Universal replacement ramp bumper is constructed of industrial rubber and molded to accept the bolt or lag screw of your choice along with a washer for added security. 2.5” dia.

45092 Ramp Bumper, Pk/1 #10715 24

DOOR BUMPER

Commonly found mounted between the screen and entry door. Made of 100% natural rubber compounds for lasting durability and a steel washer molded into the base for a more secure mounting. Includes proper mounting screw.

45131 1” Rubber Bumper, Black, Packaged#11745 24

45204 Door Bumper, White, Packaged#20625 24

43202 Door Bumper, PK/2#20545 24

45131

45092

45091 45090

JR PRODUCTSDOOR BUMPERS

UNIVERSAL DOOR BUMPER

Install anywhere doors or cabinets come into con-tact with stationary items. Constructed of white polymer rubber to provide excellent protection; easily installed using the peel and stick adhesive backing.

JR PRODUCTS CLOSET DOOR BUMPER

This universal door bumper is used most often with sliding closet doors. Easily installs anywhere the door comes into contact with the wall or metal frame to prevent damage.


GRAB HANDLES • DOOR HARDWARE

Date post:	11-Oct-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

BITS • TOOLS HARDWARE · bits; overall length 79⁄16". 41817 Square Recess/...

Documents