+ All Categories
Home > Documents > BL 157 E Steel Rolling Mill Lubrication - SPX FLOW · AutoBlend Systems Steel Rolling Mill...

BL 157 E Steel Rolling Mill Lubrication - SPX FLOW · AutoBlend Systems Steel Rolling Mill...

Date post: 20-Aug-2018
Category:
Upload: tranxuyen
View: 230 times
Download: 0 times
Share this document with a friend
4
Transcript
Page 1: BL 157 E Steel Rolling Mill Lubrication - SPX FLOW · AutoBlend Systems Steel Rolling Mill Lubrication Specifi c lubricant emulsion concentrations made by batch processes must be
Page 2: BL 157 E Steel Rolling Mill Lubrication - SPX FLOW · AutoBlend Systems Steel Rolling Mill Lubrication Specifi c lubricant emulsion concentrations made by batch processes must be

AutoBlend SystemsSteel Rolling Mill Lubrication

Specifi c lubricant emulsion concentrations made by batch processes must be analyzed before use, and modifi ed if incorrect. Bran+Luebbe systems offer:

• On-line concentration changes.

• Reduced oil usage.

• Easy maintenance of precise dilutions.

• Elimination of wasteful and time-consuming batch operation.

• Batch dumping or reworking is eliminated.

• Ability to change spray nozzle pressure on-line without effecting concentration.

Simplifi ed process diagram

Advantages

Application Notes

Page 3: BL 157 E Steel Rolling Mill Lubrication - SPX FLOW · AutoBlend Systems Steel Rolling Mill Lubrication Specifi c lubricant emulsion concentrations made by batch processes must be

What technology might the customer have in place?• Batch process making specifi c concentrations of lubricant emulsions which must then be analyzed and

subsequently modifi ed if incorrect, or reworked if a concentration change is required

Application• Sheet steel manufactures

Who would Benefi t?• Steel mills with rolling mills manufacturing sheet steel

System operationSheet steel manufacturers need to maintain accurate on-line and on-demand oil concentrations for their rolling mills. By adjusting the stroke length of the metering pumps in the Bran+Luebbe lubrication system (refer to the diagram on the opposite page), an operator can establish different liquid ratios. Total throughput is independently controlled by pump motor speed.

SPX Flow Technology - Werkstrasse 4 - D-22844 NorderstedtPhone: +49 40 52202-0 - Fax: +49 40 52202-444E-mail: [email protected] - http://www.branluebbe.com

For more information about our worldwide locations, approvals, certifi cations, and local representatives, please visit www.branluebbe.com / www.spxft.com

SPX Corporation reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confi rmed in writing.

Issued: BL-157 - 1.0 - E 07/2010 Copyright © SPX Corporation 2010

Page 4: BL 157 E Steel Rolling Mill Lubrication - SPX FLOW · AutoBlend Systems Steel Rolling Mill Lubrication Specifi c lubricant emulsion concentrations made by batch processes must be

Recommended