17
| Date post: | 15-Jan-2016 |
| Category: |
Documents |
| Upload: | esther-adams |
| View: | 233 times |
| Download: | 0 times |
MEDIUM PITCH
Blade Angle vs. RPM
High Angle – Low RPM
Low Angle – High RPM
Constant Speed PrinciplesProp Governor adjusts blade angles to maintain RPM
On Speed – Blade Angle OK
Blade Angle vs. RPM
High Angle – Low RPM
Low Angle – High RPM
Constant Speed PrinciplesProp Governor adjusts blade angles to maintain RPM
On Speed – Blade Angle OK
Over Speed – Blade Angle increasesHIGHER PITCH
Blade Angle vs. RPM
High Angle – Low RPM
Low Angle – High RPM
Constant Speed PrinciplesProp Governor adjusts blade angles to maintain RPM
On Speed – Blade Angle OK
Over Speed – Blade Angle increases
Under Speed – Blade Angle decreases
LOWER PITCH
Prop Control Power Lever
Speeder SpringFly-Weights
Pilot Valve
Propeller Governor
Beta Ring
Low PitchStop Nut
Beta Valve
Prop Control Power Lever
Propeller Governor
On-SpeedRPM
SettingActualRPM
2000 2000
MEDIUM PITCH
Prop Contro l Power Lever
Propeller Governor
Over-SpeedRPM
SettingActualRPM
2000 2005
HIGHER PITCH
Prop Contro l Power Lever
Propeller Governor
Under-SpeedRPM
SettingActualRPM
2000 1995
LOWER PITCH
Propeller Governor
RPMSetting
ActualRPM
2000 1990
LOWER PITCH
Low Pitch Stop
P rop C on tro l P ow er Leve r
Propeller Governor
RPMSetting
ActualRPM
2000 1990
LOWER PITCH
Low Pitch Stop
Under-Speed
P rop C on tro l P ow er Leve r
Beta Valve Closes
Low Pitch Stop NutPulls Beta Ring Forward
Prop GovTest
Over-Speed Governor
Pre-set: 2288 RPM
Prop GovTest
Over-Speed Governor
Prop Gov. Failed
Prop GovTest
Over-Speed Governor
Prop Gov. Failed
At 2288 RPMOverspeed Governor
Assumes Control
Do you like what you’ve see so far?
Do you want to see the restof this system presentation?
Send me an Email [email protected]
for information on how to schedule a King Air course tailored
to your training needs.
