1
)ROOUCT SHOWCASE PLASTIC MEDIA BLASTING Composition Materials Co. Inc. www.compomat.com Plastic media blasting (PMB) is a process for the rapid, economic, and safe stripping of coatings. Because the plastic granules are harder than coatings but softer than underlying substrates, PMB can quickly strip coatings without harming sensitive surfaces. Composition Materials manu- factures five grades of Plasti-Grit plastic media. The media are safe, economical, recyclable, and environmentally preferred. t I , jr ~ J • --J j ; * • ' ,s ¢ Circle 160 on reader information card BLAST CLEANING NLB Corp. www.nlbcorp.com NLB's Model 40201D pump unit for water-jet blast cleaning of paint booth grates, skids, and carriers provides ultra-high pressure (up to 40,000 psi) water at a flow rate of less than 6 gpm. It typically provides UHP water to NLB's Spin Jet® floor and grit cleaners, robotically mounted heads, and hand lances. It minimizes downtime and can be mounted on a skid or trailer. Circle 161 on reader information card SHOT BLAST SYSTEM Roesler Metal Finishing USA LLC www.rosler.com This innovative design uses a robot to replace the components to be blasted into the blast chamber. The robot is simultaneously rotating and oscillat- ing the parts for optimum processing results. The Roboblaster is ideal for continuous, in-line shot blasting of complex, delicate components like auto- motive cylinder heads and engine blocks. With the Roboblast concept shot blast operations can easily be integrated into fully automatic manufacturing systems. Circle 162 on reader information card 24 Metal Finishing
