Blast, frag, fire, ballistic, and
arc flash protectionMANUFACTURED BY:
JBS Fabrication Ltd is a wholly owned subsidiary of JBS Group (Scotland) Ltd www.jbsgroupglobal.com January 2021
JBS Fabrication Ltd have partnered with Breton Industries USA to provide blast, frag, fire, ballistic and arc flash
solutions to safeguard people against hazards using our BlastTac range of products.
BlastTac utilises the best available next generation fabrics to create the world’s safest technologies and
innovations.
BlastTac blast curtains and blast blankets are incredibly lightweight, completely non flammable when combined
with Firemax and more effective than steel.
For protection in high-temperature applications, BlastTac created FireMax®. FireMax curtains and blankets
provide fire, heat and arc flash protection in addition to blast protection. Truly non-flammable, FireMax curtains
and blankets will not burn, melt or ignite and will also shed molten metal, certain chemicals, flammable liquids
and other molten substances. They are also re-usable even after intense heat and flame exposure.
Overview
Next Generation Fabric Solutions
Applications
Value Creation
BlastTac fabrics save lives, increases efficiency
of operation and provides asset protection:
─ BlastTac has saved the lives of 37 NYPD police
officers by protecting from direct ballistic hits to
vests.
─ BlastTac provides the best available protection
during high pressure testing of assets such as
Choke & Kill manifolds, BOP, HPU’s in industrial
onshore and offshore locations.
─ BlastTac increases efficiency of operations.
During C & K manifold testing one operator
saved US$4.8 million in 18 months on an
offshore drilling rig in the UK North Sea.
SB72FM Material Construction
9853 CORE MATRIX TECHNOLOGY. 9853 patented technology offers vastly superior
protection against high speed frag deformable and non-deformable threats which are more
common and lethal than bullets. Our 9853 is constructed in a monolithic structure,
stopping threats from either side.
AMOURCORE 121 TECHNOLOGY. ArmourCore patented technology offers superior ballistic
protection. Used in conjunction with our exclusive 9853, our blankets and curtains offer UL
CERTIFIED PROTECTION to Level 2. Simply put - it will stop a .357 magnum!
US BALLISTIC NYLON (1050 Denier). Our Blast Safety Blankets are encased in in the
world’s best 1050 denier, US Military Grade ballistic nylon. This outer casing offers extreme
durability and adds waterproof capability for our blankets.
Test Standards
─ Independently tested and certified by Chesapeake Testing Labs in North Carolina.
─ Tested in accordance with U.S. Military, UL, NFPA standards, NIJ 0101.06 Compliance, V50
Test Sheet.
─ JBS complete system (Frame, Track Runners, Mounting Points and Blast Curtains) fully certified
by Lloyds Register. 3rd part verification requested by Exxon Mobil and Aker Solutions.
─ Tested in accordance with ASTM International Test Standards.
─ Thoroughly tested in-house by BlastTac (Breton Industries).
─ Independent assessment performed by DNV GL for oil and gas blast curtain application.
Ballistic Test
TEST: .357 MAG 158GR JSP . This test is a U.S. Military Standard test
using Application Standard MIL-STD-662F.
RESULT: PASS. Projectile Stopped on BlastTac Strike face
VELOCITY: 1374 ft/sec.
STOPPED
(BACK) OF
STRIKE FACE
PASSED
TEST
STOPPED
ON STRIKE
FACE
Soft Armor .308 (7.62 NATO) Round Live Fire Test
TEST: .308 (7.62 NATO) rounds after test at NIJ test centre.
Hit 32 times in an area of one sq.ft. Soft armor panel
remains flexible with no penetration.
NIJ Standard 0101.06 Compliant.
NIJ V50 Testing Sheet.
This test is a U.S. Military Standard test using Application
Standard MIL-STD-662F.
RESULT: PASS. Projectile Stopped on Strike face
PASSED TEST
Step 1 - Site Survey for Offshore Drilling Rig Choke & Kill Manifold
1. Assess the location of high pressure equipment and proximity to rig floor workers. Confirm test pressures, hazards such as combustibility, determine threat level.
2. Determine the SAFETY PERIMETER around the outside of the curtain.
3. Check HP equipment for likely failure points and projectile trajectories.
4. Check if the curtain will obstruct normal rig floor operations when deployed. Access for maintenance / operations.
5. Will the deck anchor points become trip hazards when the curtain is not in use?
6. Identify fixing points for curtain and frame. Hot work / No hot work
7. Measure area to be covered by curtain.
8. Determine if there is a need for a roof curtain.
Step 2 - 3D Design Proposal
Step 3 - Installation
INSTALLED WORLDWIDE MINIMUM LIFE CYCLE OF 5 YEARS EASY OPERATION
Turnkey Project: Site survey, design & manufacture, installation onshore / offshore all over the
globe – contact JBS Fabrication Ltd.
Pressure Test Bay Roof Protection - Retrofit
Many pressure test bays do not have any roof
protection.
The JBS patent pending roof containment system
has been designed to provide a certified retrofit roof
containment system using our BlastTac fabrics.
Manual and automated systems are available with
options for CCTV, Lighting and Interlocks.
Finite Element Analysis (FEA) is used to determine
the threat level and a system designed to provide
maximum test cell utilisation.
JBS complete the turnkey project from site survey,
design, installation & commissioning.
Power Station Main GSU Transformer Protection
JBS BlastTac curtain systems are designed to protect against threats from arc flash, ballistics, fire, blast andfrag. Power Authorities have identified the GSU transformers as a critical component of the overall powergeneration facility.To assess the physical risks, identify objectives, and develop alternatives to mitigate the risks and enhancethe resilience of the Generator Step‐Up (GSU) transformers at Power Plants, JBS have designed anautomated blast containment system to meet the design criteria detailed below:
Pre-Installation
Installed
Defence
Installation of BlastTac pressure test blast curtains for testing of equipment used on high performance aerial platforms that fly in
excess of Mach1. Project installation completed at the client site on the east coast of the USA.
Client meets the needs of the U.S. Department of Defence and friendly nations around the world by providing high-performance
aerial target systems and advanced unmanned tactical aerial platforms.
VSM Blast Curtain Protection – Separate valve of one phase from the other valves
Requirement: BlastTac blast curtain protection between each phase of the valve arrangements. Each unit of the VSM contains a stored energy and can potentially explode at any time. Blast curtain must withstand flying fragments and be completely non-flammable (or self extinguishing), lightweight and odour resistant.
Portable Pressure Test Containment
- Flat packed for ease of transportation
and storage
- Quick and easy assembly frame for
high pressure testing
- 15,000 & 25,000 psi standard
- 15 minute assembly
- Certified lifting eyes for crane lifting
- Clear window option for viewing
- Each member is replaceable and
universal to mount in different
configurations to form different
shapes.
- FEA performed on design
- BlastTac curtains are UL / Lloyds
Register certified and DNV assessed
- Firemax option to make enclosure
truly non flammable
Arc Flash Protection
Impact Load Analysis
EXAMPLE
- 15 000 PSI test
- Failure of 2” steel fitting
- 162 m/sec object speed
- 12 505 N Impact Load
- Finite Element Analysis (FEA)
- Live testing at laboratory
- Design validation by load test
and 3rd part verification by
Lloyds Register
Multiple Test Bay Flexibility
Requirement: One large test bay with the capability to open out to three individual test bays by rolling back the blast & frag
curtains.
Option: Motorised or manual tracking system to open/close out the curtains.
Data Sheet and Certificate of Conformity
Contractor / Client: Operator: Asset Name: Country:
Ensco Maersk 102 UK
Ensco Maersk 101 UK
Transocean Chevron Discoverer Angola
Transocean Total Galaxy 1 UK
Noble Drilling Anadarko Bob Douglas USA
Ensco Chevron 109 Angola
Rowan Drilling Total Gorilla V UK
Diamond Drilling Shell Ocean Patriot UK
Rowan Drilling BP Amoco Joe Douglas Trinidad
Maersk Drilling Maersk Oil Highlander Singapore
Transocean BP Amoco EXLII Trinidad
Dolphin Drilling Chevron Blackford Dolphin UK
Diamond Drilling BP Amoco Ocean Great White Australia
Rowan Drilling BP Amoco EXLIII Trinidad
Platform Decommissioning Shell Brent Charlie UK
Transocean Suncor Energy Barents Canada
New York Power Authority Niagara Falls Power Plant RM & LPGP USA
Ensco Chevron 8504 Indonesia
Proctor and Gamble Onshore Pressure Test Barrier USA
Completed Projects
Contractor / Client: Operator: Asset Name: Country:
Rowan Perenco Gorilla VII UK
Nabors Drilling Chevron 707 Kazakhstan
Nabors Drilling Chevron 708 Kazakhstan
Diamond Drilling Shell Ocean Endeavor UK
Rowan – Firemax Heashields on Derrick Chrysaor Gorilla VII UK
Halliburton Odessa Texas Onshore Pressure Test Facility USA
TechnipFMC Houston Texas Pressure & Arc Flash Test Protection USA
SpaceX California Blast Proof Roller Shutter Door System USA
Transocean Conoco Phillips 712 UK
Blue Origin Arc Flash, Blast & Frag USA
GE Baker Hughes Onshore Pressure Test Barrier USA
Atlas Copco Onshore Pressure Test Barrier USA
Colorado Drug Task Force Ballistic Protection USA
NASA Space Exploration USA
Clearwater Police Ballistic Protection USA
Kratos Pressure Test Containment for Advanced USA
Unmanned Tactical Aerial Platforms
Completed Projects
Completed Projects
Contractor / Client: Operator: Asset Name: Country:
Shell Shell Perdido - Rig 205 USA
Shell Shell Mars TLP- Rig 201 USA
Aker Solutions Exxon Mobil Hebron Canada
Odfjell Drilling BP Amoco Clair Ridge UK
TechnipFMC Shell Prelude FLNG Australia
Diamond Offshore BP Amoco Ocean Black Hornet USA
Exxon Mobil Exxon Mobil Hibernia Canada
European Space Agency ESA Workshop Testing Netherlands
Diamond Offshore Petrobras Ocean Courage Brazil
BAE Systems UK Navy T26 Global Combat Ship UK
(HMS Glasgow, Cardiff and Belfast – Arc Flash Protection)
TFMC TFMC Hyderabad Pressure Test India
TechnipFMC TFMC Automated Test Bay Roof Brazil
US Navy USN US Naval Warfare Centre USA
SpaceX SpaceX Portable Pressure Test USA
Baker Hughes Baker Hughes Blast Blankets UK
Essar Oil UK Essar Blast & Fire Protection UK
Halliburton Halliburton Pipe Wraps UK
Additional Services and Applications
- We can offer SB72CN which is the same material but encased in CarbonX®
RepelTM, a woven fabric designed to defend against fire, heat, and arc flash in a
single textile.
ANNUAL
MAINTENANCE
CONTRACT
- We can extend the lifecycle of your installation from 5-10 years through annual
maintenance contract
- Test bay/workshops applications available as well as compact and portable options
for on-site pressure testing
- Can be used across wide range of industries where personnel are exposed to gas
lines, pressure vessels, high pressure piping, gas charged equipment, explosives
etc.
OTHER
APPLICATIONS
Contact Information
Head Office Peterhead UK
JBS Fabrication Ltd
South View
Dales Industrial Estate
Peterhead AB42 3GZ
Scotland, UK
Contact: UK: +44 (0) 1779 479742
www.jbsgroupglobal.com