MANUFACTURERS AND SUPPLIERS OF FULLY INSULATED TOOLS AND ELECTRICAL SAFETY

PRODUCTS

Fully Insulated Hand Tools• Insulated Hand Tools

Manufactured in the UK to IEC/EN 60900:2004

• High Quality Base Tools

• Full in-house test facility verified by BSI

• In-house engineering facility

• Fast production of samples for approval

Cable Preparation Tools

• For professional stripping of the outer sheath of LV/MV/HV cables

• Precision tools giving excellent results

• For cables from 25mmØ up to 70mmØ

• Available in kits

Safety Rubber Matting LV & HV

• Working Voltages from 450V up to 36kV

• Low Smoke / Flame Retardant

• Supplied in rolls or cut lengths

• Oil/Acid Resistant• IEC 61111:2009• BS921 / ASTM

Electrical Safety Gloves• IEC 60903/EN60903• Class 00 up to Class 4• Working Voltage from

500V up to 36kV• Available in 36cm or

41cm long• Hand sizes 8,9,10 &11• Storage bag & box

available• Leather glove

protectors available

Safety Rescue Hooks

• Available for 1kV & 60kV system voltage

• Suitable for indoor use only

• Mounting station available for storage of the hook in a prominent position

• Supplied with rubber hand stop

Earthing Equipment• Portable Earthing has

been supplied to our customers for many years – a wide range of portable earthing equipment including, high voltage live line testers, switching rods, earthing and short circuiting devices, earthing clamps, earthing rods and lance earthing devices.

Shrouding & Clamps• LV Neoprene shrouding

with Nylon Insert• Tested to ENTS 43-103• Available in rolls or cut

sizes• Can be supplied with

Velcro fastening• Insulating safety clamps

to secure the shrouding in place

• provides protection when working in proximity to live low voltage

• 1000V working voltage• EA43-103

Bodtect Overhead Line Shrouding

Arc Flash Protection

• Electricians are killed or receive serious burn injuries as a result of an Electrical Arc explosion. Yet these injuries can be avoided with training, proper work practices and using protective face shields, hoods and clothing that are NFPA 70E-2004 compliant.

• The Flashguard™ line of head and body protective products incorporate the latest in fabric and material technologies to help protect the user from the thermal energy of an arc incident.

Cableguard• Cable Guard is a plastic

cable protection capping profile to protect cables on telegraph poles and walls. Boddingtons Electrical offers a wide range of high quality plastic cable guard for:

• Protection of vertical cable runs on telegraph poles, fences and walls

• Highly shock resistant• Cable Guard is lightweight

and easy to transport• Cable Guard can also be

used to protect other utility supplies on walls ie gas, oil, water

Cable and Hose Ramps

• HR3, interlocking solid rubber ramps, solve the problem of how to protect large cables from traffic and allow all types and weights to drive over safely.

• It is an important safety feature to have a critical mass using 3 or more sections of HR3 or HR5 to make a stable Cable and Hose Ramp. Highly shock resistant

Cable Protection• prevents accidents

caused by trailing cables and leads, eliminating horrific personal injuries and damage to equipment such as computers.

• manufactured in flexible vinyl and tested to BS6458: Section 2.1:1984 (IEC 695-2-1:1980) (No ignition at 750˚C) and BS2782: pt 1: method 141: 1986 (ISO4589:1984).

• This material is inherently self-extinguishing and achieves BS476: pt 7: class 3: 1987 BS903C5 500V

Stay Wire Markers• manufactured from

UV resistant plastic• customised lengths

and kits available• provides visual

identification of staywire