+ All Categories
Home > Documents > Boiler Insulation

Boiler Insulation

Date post: 25-Jan-2017
Category:
Upload: dangtu
View: 217 times
Download: 0 times
Share this document with a friend
2
We have the necessary knowledge and experience to design and install the most effective insulation and the correct lagging system for all types of boilers. ONE OF OUR CORE COMPETENCES Norisol’s competences within thermal insulation include insulation of boilers. We have the necessary knowledge and experience to design and install the most effective insulation and the correct lagging system for all types of boilers. AVOID HEAT LOSS AND INCREASE EFFICIENCY Insulation of boilers is necessary to protect against contact with hot surfaces and to ensure an acceptable working temperature in the boiler house. Most impor- tantly, however, we insulate to avoid heat loss and optimize the efficiency of the boiler. The more efficient the less carbon dioxide emission and the lower operating cost. CHOOSING INSULATION MATERIAL Many aspects have to be considered when choosing type of insulation. Naturally, the surface temperature is of importance, what is the thermal conductivity of the insulation material, how easily can the material be fas- tened to the boiler, can thermal bridges be avoided etc. Boiler Insulation LAGGING CHALLENGES Lagging is used to provide protection of the insulation but also to create a surface which is aesthetically pleasing to the eye. In general, rib lagging is more pleasing to look at than flat-sheet lagging on large areas. On some types of equipment flat-sheet lagging is the most suitable. There are other important things to consider when choosing the outer lagging system for a boiler. Operating temperatures are high for boilers and this means that you have to take into account expansion and contraction requirements. And the amount and direction of the expansion may vary depending on the various types and sizes of equipment – flues, ducts, boiler etc. BENEFIT FROM OUR EXPERIENCE Norisol have carried out boiler insulation in most parts of the world and have gained great knowledge and experience in this field. We have the right personnel to help you through all phases of the project, or you can choose to let us assist you with for instance engineering, material delivery and supervision. WE DO THE JOB
Transcript
Page 1: Boiler Insulation

We have the necessary knowledge and experience to design and install the most

effective insulation and the correct lagging system for all types of boilers.

ONE OF OUR CORE COMPETENCES

Norisol’s competences within thermal insulation include insulation of boilers. We have the necessary knowledge and experience to design and install the most effective insulation and the correct lagging system for all types of boilers.

AVOID HEAT LOSS AND INCREASE

EFFICIENCY

Insulation of boilers is necessary to protect against contact with hot surfaces and to ensure an acceptable working temperature in the boiler house. Most impor-tantly, however, we insulate to avoid heat loss and optimize the efficiency of the boiler. The more efficient the less carbon dioxide emission and the lower operating cost.

CHOOSING INSULATION MATERIAL

Many aspects have to be considered when choosing type of insulation. Naturally, the surface temperature is of importance, what is the thermal conductivity of the insulation material, how easily can the material be fas-tened to the boiler, can thermal bridges be avoided etc.

Boiler Insulation

LAGGING CHALLENGES

Lagging is used to provide protection of the insulation but also to create a surface which is aesthetically pleasing to the eye. In general, rib lagging is more pleasing to look at than flat-sheet lagging on large areas. On some types of equipment flat-sheet lagging is the most suitable.

There are other important things to consider when choosing the outer lagging system for a boiler. Operating temperatures are high for boilers and this means that you have to take into account expansion and contraction requirements. And the amount and direction of the expansion may vary depending on the various types and sizes of equipment – flues, ducts, boiler etc.

BENEFIT FROM OUR EXPERIENCE

Norisol have carried out boiler insulation in most parts of the world and have gained great knowledge and experience in this field. We have the right personnel to help you through all phases of the project, or you can choose to let us assist you with for instance engineering, material delivery and supervision.

WE DO THE JOB

Page 2: Boiler Insulation

BOILER INSULATION – PROJECTS

1. Fiskeby Board AB, Sweden. Insulation and lagging of waste heat recovery boiler

including pipe systems and equipment. Work carried out for Babcock & Wilcox Vølund.

2. Insulation and lagging of complete boiler system including ducts and pipes in

the spectacular waste heat recovery plant L90 in Denmark.

3. Process heat recovery facility at Finnfjord AS, Norway. Insulation and lagging of two

boilers including pipe systems. Work carried out for Aalborg Engineering A/S.

4. Power plant “Svanemølleværket”, Copenhagen, Denmark. Insulation and lagging of boiler,

main steam pipes and valves. Work carried out for Aalborg Engineering.

Norisol is a Scandinavian group offering a comprehensive package of services within technical

insulation, access & scaffolding and building contracts. Design and engineering, material supply,

supervision and manpower are also parts of our services. Norisol has branches throughout

Denmark, Norway, Sweden and in Aberdeen.

NORISOL DENMARK Skælskør, tel. +45 7011 7744

NORISOL NORWAY Porsgrunn, tel. +47 3557 2800 Stavanger, tel. +47 5171 6200

NORISOL SWEDEN Stenungsund, tel. +46 (0) 303728060

www.norisol.com

WE DO THE JOB

1 2

3 4


Recommended