DETAIL R
SCALE .2
R
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 1 OF 7
DWG NO
R-7902
TITLE
Bollard Post R-7902
SIZE
C
NOT TO SCALE
REV
C1
COPYRIGHT RESERVED THIS PLAN DRAWING AND DESIGN ARE, AND AT ALL TIMES REMAIN, THE EXCLUSIVE PROPERTY OF RELIANCE FOUNDRY CO. LTD.
Unit 207, 6450 - 148 Street, Surrey, BC V3S 7G7, Canada
1-877-789-3245 [email protected]
www.reliance-foundry.com
Bollard Post R-7902General Description:
Make a pronounced statement on entry to your
streetscape, business, park, school or stadium with the
contemporary and practical design of the model R-7902
steel bollard. A staple of the product line, it will
complement the aesthetics of almost any architectural
style. It can be embedded in new concrete or
surface-mounted on existing concrete. For locations
where access needs fluctuate, it can also be installed
with removable or fold down mountings. The model
R-7902 can be finished in one of seven different
powder-coated color options and it is kept in stock,
available to ship immediately.
Specifications:
Height: 36" ( Above Grade )
Base Diameter: 4 3/8"
Weight: 31 lbs ( Bollard Post Full Length )
Material: Steel ( ASTM A36 )
Finish Options:
Polyester Powdercoated
See Reliance Foundry's standard color options at:
www.reliance-foundry.com/bollard/colors-bollards
Installation Options:
Fixed - Embedded Mounting in New Concrete
(see sheet 2 of 7)
Fixed - Flanged in Existing Concrete
(see sheet 3 of 7)
Removable - Receiver with Lid in New Concrete
(see sheet 4 of 7)
Removable - Receiver with Chain in New Concrete
(see sheet 5 of 7)
Removable - Fold Down Mounting in Existing Concrete
(see sheet 6 of 7)
For more information on bollard post installation, please visit:
www.reliance-foundry.com/bollard/installation-bollards
Accessory Options:
Optional - Chain Accessories Installation Details
(see sheet 7 of 7)
Care and Maintenance:
Reliance's line of bollards are finished with a long-lasting
powder-coating. Proper care and maintenance are required.
Regularly-performed inspections and routine cleaning will
ensure that a bollard retains its aesthetic appeal and does not
become damaged by the elements.
See Reliance Foundry's maintenance guide at:
www.reliance-foundry.com/bollard/maintenance-bollards
5 Available Mounting Options
Fixed
Embedded
Mount
(for detail, see sheet 2 of 7)
Flanged
Surface
Mount
(for detail, see sheet 3 of 7)
Removable
Receiver
with Lid
(for detail, see sheet 4 of 7)
Removable
Receiver
with Chain
(for detail, see sheet 5 of 7)
Fold Down
Mount
(for detail, see sheet 6 of 7)
Chain Eye 3/8"
(Powder Coated)
Quick Link Connector
(Powder Coated)
Bollard Chain 5/16"
(Powder Coated)
Optional Chain Accessories Available
5/16" Chain Accessories
Installation Sample
(for detail, see sheet 7 of 7)
PARTS LIST
WEIGHTMATERIALDESCRIPTIONPART NUMBERQTYITEM
31 lbsSteel Powder CoatedR7902 Fixed Bollard BodyR7902 Fixed Bollard11
Polyethylene PlasticPolyethylene Plug 1/2" Polyethylene Plug 1/2" 12
3/8 lbsSteel Epoxy CoatedSteel Rebar 10 mm x 7" Steel Rebar13
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 2 OF 7
DWG NO
R-7902
TITLE
Bollard Post R-7902
SIZE
C
NOT TO SCALE
REV
C1
COPYRIGHT RESERVED THIS PLAN DRAWING AND DESIGN ARE, AND AT ALL TIMES REMAIN, THE EXCLUSIVE PROPERTY OF RELIANCE FOUNDRY CO. LTD.
Unit 207, 6450 - 148 Street, Surrey, BC V3S 7G7, Canada
1-877-789-3245 [email protected]
www.reliance-foundry.com
Bollard Post R-7902General Description:
Make a pronounced statement on entry to your
streetscape, business, park, school or stadium with the
contemporary and practical design of the model R-7902
steel bollard. A staple of the product line, it will
complement the aesthetics of almost any architectural
style. It can be embedded in new concrete or
surface-mounted on existing concrete. For locations
where access needs fluctuate, it can also be installed
with removable or fold down mountings. The model
R-7902 can be finished in one of seven different
powder-coated color options and it is kept in stock,
available to ship immediately.
Specifications:
Height: 36" ( Above Grade )
Base Diameter: 4 3/8"
Weight: 31 lbs ( Bollard Post Full Length )
Material: Steel ( ASTM A36 )
Finish Options:
Polyester Powdercoated
See Reliance Foundry's standard color options at:
www.reliance-foundry.com/bollard/colors-bollards
Installation Options:
Fixed - Embedded Mounting in New Concrete
(see sheet 2 of 7)
Fixed - Flanged in Existing Concrete
(see sheet 3 of 7)
Removable - Receiver with Lid in New Concrete
(see sheet 4 of 7)
Removable - Receiver with Chain in New Concrete
(see sheet 5 of 7)
Removable - Fold Down Mounting in Existing Concrete
(see sheet 6 of 7)
For more information on bollard post installation, please visit:
www.reliance-foundry.com/bollard/installation-bollards
Accessory Options:
Optional - Chain Accessories Installation Details
(see sheet 7 of 7)
Care and Maintenance:
Reliance's line of bollards are finished with a long-lasting
powder-coating. Proper care and maintenance are required.
Regularly-performed inspections and routine cleaning will
ensure that a bollard retains its aesthetic appeal and does not
become damaged by the elements.
See Reliance Foundry's maintenance guide at:
www.reliance-foundry.com/bollard/maintenance-bollards
Notes:
1) Embedment details are for reference illustration only. Minimum foundation sizes depend on local soil conditions,
weather conditions, and engineering requirements.
2) Bollard post is provided as shown. Concrete, foundation and/or installation ordered separately or provided by others.
3) Minimum foundation sizes depend on local soil conditions, weather conditions, and engineering requirements.
4) Dimensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension
is critical to your particular installation.
5) Reliance Foundry reserves the right to amend design and specifications without prior notice for product improvement.
1
2
3
4 3/8
1/8 Wall
7
12"
Min.
10" Min.
36
Grade
New Concrete
PARTS LIST
WEIGHTMATERIALDESCRIPTIONPART NUMBERQTYITEM
30 lbsSteel Powder CoatedR7902 Flanged Bollard BodyR7902 Flanged Bollard11
1/8 lbsStainless SteelHexagon Socket Button Head Cap Bolt 1/2" x 1 1/4" - requires 5/16" hex keyButton Head Bolt 1/2" x 1 1/4"32
Stainless SteelStainless Steel Washer 1/2" OD 1 1/4" Thick .05"Stainless Steel Washer 1/2"33
1/8 lbsSteel PlatedDrop-in Concrete Insert 1/2" - requires 5/8" x 2" hole (dia. x depth)Drop-in Concrete Insert 1/2"34
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 3 OF 7
DWG NO
R-7902
TITLE
Bollard Post R-7902
SIZE
C
NOT TO SCALE
REV
C1
COPYRIGHT RESERVED THIS PLAN DRAWING AND DESIGN ARE, AND AT ALL TIMES REMAIN, THE EXCLUSIVE PROPERTY OF RELIANCE FOUNDRY CO. LTD.
Unit 207, 6450 - 148 Street, Surrey, BC V3S 7G7, Canada
1-877-789-3245 [email protected]
www.reliance-foundry.com
Bollard Post R-7902General Description:
Make a pronounced statement on entry to your
streetscape, business, park, school or stadium with the
contemporary and practical design of the model R-7902
steel bollard. A staple of the product line, it will
complement the aesthetics of almost any architectural
style. It can be embedded in new concrete or
surface-mounted on existing concrete. For locations
where access needs fluctuate, it can also be installed
with removable or fold down mountings. The model
R-7902 can be finished in one of seven different
powder-coated color options and it is kept in stock,
available to ship immediately.
Specifications:
Height: 36" ( Above Grade )
Base Diameter: 4 3/8"
Weight: 31 lbs ( Bollard Post Full Length )
Material: Steel ( ASTM A36 )
Finish Options:
Polyester Powdercoated
See Reliance Foundry's standard color options at:
www.reliance-foundry.com/bollard/colors-bollards
Installation Options:
Fixed - Embedded Mounting in New Concrete
(see sheet 2 of 7)
Fixed - Flanged in Existing Concrete
(see sheet 3 of 7)
Removable - Receiver with Lid in New Concrete
(see sheet 4 of 7)
Removable - Receiver with Chain in New Concrete
(see sheet 5 of 7)
Removable - Fold Down Mounting in Existing Concrete
(see sheet 6 of 7)
For more information on bollard post installation, please visit:
www.reliance-foundry.com/bollard/installation-bollards
Accessory Options:
Optional - Chain Accessories Installation Details
(see sheet 7 of 7)
Care and Maintenance:
Reliance's line of bollards are finished with a long-lasting
powder-coating. Proper care and maintenance are required.
Regularly-performed inspections and routine cleaning will
ensure that a bollard retains its aesthetic appeal and does not
become damaged by the elements.
See Reliance Foundry's maintenance guide at:
www.reliance-foundry.com/bollard/maintenance-bollards
Notes:
1) Embedment details are for reference illustration only. Minimum foundation sizes depend on local soil conditions,
weather conditions, and engineering requirements.
2) Bollard post is provided as shown. Concrete, foundation and/or installation ordered separately or provided by others.
3) Minimum foundation sizes depend on local soil conditions, weather conditions, and engineering requirements.
4) Dimensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension
is critical to your particular installation.
5) Reliance Foundry reserves the right to amend design and specifications without prior notice for product improvement.
1
2
3
4
36
4 3/8
1/8 Wall
7 1/23/8
Grade
Concrete Pavement
6
7 1/2
SECTION M-M
SCALE .125
PARTS LIST
WEIGHTMATERIALDESCRIPTIONPART NUMBERQTYITEM
31 lbsSteel Powder CoatedBollard R7902 Removable AssemblyR7902 Removable11
24 lbsGalvanized Steel w/ 316 Stainless Steel CoverR7901R Receiver Assembly w/ LidR7901R Receiver 12
5/8 lbsChoice of Brass or Stainless SteelOptional Padlock (Brass or Stainless Steel)Padlock (Optional)13
M
M
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 4 OF 7
DWG NO
R-7902
TITLE
Bollard Post R-7902
SIZE
C
NOT TO SCALE
REV
C1
COPYRIGHT RESERVED THIS PLAN DRAWING AND DESIGN ARE, AND AT ALL TIMES REMAIN, THE EXCLUSIVE PROPERTY OF RELIANCE FOUNDRY CO. LTD.
Unit 207, 6450 - 148 Street, Surrey, BC V3S 7G7, Canada
1-877-789-3245 [email protected]
www.reliance-foundry.com
Bollard Post R-7902General Description:
Make a pronounced statement on entry to your
streetscape, business, park, school or stadium with the
contemporary and practical design of the model R-7902
steel bollard. A staple of the product line, it will
complement the aesthetics of almost any architectural
style. It can be embedded in new concrete or
surface-mounted on existing concrete. For locations
where access needs fluctuate, it can also be installed
with removable or fold down mountings. The model
R-7902 can be finished in one of seven different
powder-coated color options and it is kept in stock,
available to ship immediately.
Specifications:
Height: 36" ( Above Grade )
Base Diameter: 4 3/8"
Weight: 31 lbs ( Bollard Post Full Length )
Material: Steel ( ASTM A36 )
Finish Options:
Polyester Powdercoated
See Reliance Foundry's standard color options at:
www.reliance-foundry.com/bollard/colors-bollards
Installation Options:
Fixed - Embedded Mounting in New Concrete
(see sheet 2 of 7)
Fixed - Flanged in Existing Concrete
(see sheet 3 of 7)
Removable - Receiver with Lid in New Concrete
(see sheet 4 of 7)
Removable - Receiver with Chain in New Concrete
(see sheet 5 of 7)
Removable - Fold Down Mounting in Existing Concrete
(see sheet 6 of 7)
For more information on bollard post installation, please visit:
www.reliance-foundry.com/bollard/installation-bollards
Accessory Options:
Optional - Chain Accessories Installation Details
(see sheet 7 of 7)
Care and Maintenance:
Reliance's line of bollards are finished with a long-lasting
powder-coating. Proper care and maintenance are required.
Regularly-performed inspections and routine cleaning will
ensure that a bollard retains its aesthetic appeal and does not
become damaged by the elements.
See Reliance Foundry's maintenance guide at:
www.reliance-foundry.com/bollard/maintenance-bollards
(For important detail regarding installation with OPTIONAL bollard chain accessories, refer to sheet 7 of 7)
Notes:
1) Embedment details are for reference illustration only. Minimum foundation sizes depend on local soil conditions,
weather conditions, and engineering requirements.
2) Bollard post is provided as shown. Concrete, foundation and/or installation ordered separately or provided by others.
3) Minimum foundation sizes depend on local soil conditions, weather conditions, and engineering requirements.
4) Dimensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension
is critical to your particular installation.
5) Reliance Foundry reserves the right to amend design and specifications without prior notice for product improvement.
36
New Concrete
Drain Rock
12
18"
Min.
10" Min.
Grade
2
3
* If local frost line
exceeds 12" deep,
provide adequate
drainage by piping
through concrete,
connect to drain rock
layer underneath
4 3/8
1/8 Wall
8 5/8
1
SECTION N-N
SCALE .125
PARTS LIST
WEIGHTMATERIALDESCRIPTIONPART NUMBERQTYITEM
31 lbsSteel Powder CoatedBollard R7902 Removable AssemblyR7902 Removable11
16 lbsGalvanized Steel, w/ 304 Stainless Steel ChainR7902R Receiver AssemblyR7902R Receiver 12
5/8 lbsChoice of Brass or Stainless SteelOptional Padlock (Brass or Stainless Steel)Padlock (Optional)13
2 lbs304 Stainless SteelOptional R7902RC Receiver CoverR7902RC Receiver Cover (Optional)14
N
N
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 5 OF 7
DWG NO
R-7902
TITLE
Bollard Post R-7902
SIZE
C
NOT TO SCALE
REV
C1
COPYRIGHT RESERVED THIS PLAN DRAWING AND DESIGN ARE, AND AT ALL TIMES REMAIN, THE EXCLUSIVE PROPERTY OF RELIANCE FOUNDRY CO. LTD.
Unit 207, 6450 - 148 Street, Surrey, BC V3S 7G7, Canada
1-877-789-3245 [email protected]
www.reliance-foundry.com
Bollard Post R-7902General Description:
Make a pronounced statement on entry to your
streetscape, business, park, school or stadium with the
contemporary and practical design of the model R-7902
steel bollard. A staple of the product line, it will
complement the aesthetics of almost any architectural
style. It can be embedded in new concrete or
surface-mounted on existing concrete. For locations
where access needs fluctuate, it can also be installed
with removable or fold down mountings. The model
R-7902 can be finished in one of seven different
powder-coated color options and it is kept in stock,
available to ship immediately.
Specifications:
Height: 36" ( Above Grade )
Base Diameter: 4 3/8"
Weight: 31 lbs ( Bollard Post Full Length )
Material: Steel ( ASTM A36 )
Finish Options:
Polyester Powdercoated
See Reliance Foundry's standard color options at:
www.reliance-foundry.com/bollard/colors-bollards
Installation Options:
Fixed - Embedded Mounting in New Concrete
(see sheet 2 of 7)
Fixed - Flanged in Existing Concrete
(see sheet 3 of 7)
Removable - Receiver with Lid in New Concrete
(see sheet 4 of 7)
Removable - Receiver with Chain in New Concrete
(see sheet 5 of 7)
Removable - Fold Down Mounting in Existing Concrete
(see sheet 6 of 7)
For more information on bollard post installation, please visit:
www.reliance-foundry.com/bollard/installation-bollards
Accessory Options:
Optional - Chain Accessories Installation Details
(see sheet 7 of 7)
Care and Maintenance:
Reliance's line of bollards are finished with a long-lasting
powder-coating. Proper care and maintenance are required.
Regularly-performed inspections and routine cleaning will
ensure that a bollard retains its aesthetic appeal and does not
become damaged by the elements.
See Reliance Foundry's maintenance guide at:
www.reliance-foundry.com/bollard/maintenance-bollards
(For important detail regarding installation with OPTIONAL bollard chain accessories, refer to sheet 7 of 7)
Notes:
1) Embedment details are for reference illustration only. Minimum foundation sizes depend on local soil conditions,
weather conditions, and engineering requirements.
2) Bollard post is provided as shown. Concrete, foundation and/or installation ordered separately or provided by others.
3) Minimum foundation sizes depend on local soil conditions, weather conditions, and engineering requirements.
4) Dimensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension
is critical to your particular installation.
5) Reliance Foundry reserves the right to amend design and specifications without prior notice for product improvement.
3
2
4
36
18"
Min.
10" Min.
12
Grade
New Concrete
Drain Rock
* If local frost line
exceeds 12" deep,
provide adequate
drainage by piping
through concrete,
connect to drain rock
layer underneath
4 3/8
1/8 Wall
5 1/2
1
PARTS LIST
WEIGHTMATERIALDESCRIPTIONPART NUMBERQTYITEM
27 lbsSteel Powder CoatedR7902 Fold Down Bollard AssemblyR7902 Fold Down Bollard11
15 lbsSteel HDGR7950A Fold Down Base AssemblyR7950A Fold Down Base12
Stainless SteelHexagon Socket Button Head Cap Bolt 3/8" x 1" - requires 7/32" hex keyButton Head Bolt 3/8" x 1"23
Nitrile RubberNitrile Rubber O-Ring 3/8" O-Ring 3/8"24
Steel Plated Nylon LockHex Nut Nylon Lock 3/8" - requires 9/16" wrenchHex Nut Nylon Lock 3/8"25
1/8 lbsStainless SteelHexagon Socket Button Head Cap Bolt 1/2" x 1 1/4" - requires 5/16" hex keyButton Head Bolt 1/2" x 1 1/4"46
Stainless SteelStainless Steel Washer 1/2" OD 1 1/4" Thick .05"Stainless Steel Washer 1/2"47
1/8 lbsSteel PlatedDrop-in Concrete Insert 1/2" - requires 5/8" x 2" hole (dia. x depth)Drop-in Concrete Insert 1/2"48
5/8 lbsChoice of Brass or Stainless SteelOptional Padlock (Brass or Stainless Steel)Padlock (Optional)19
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 6 OF 7
DWG NO
R-7902
TITLE
Bollard Post R-7902
SIZE
C
NOT TO SCALE
REV
C1
COPYRIGHT RESERVED THIS PLAN DRAWING AND DESIGN ARE, AND AT ALL TIMES REMAIN, THE EXCLUSIVE PROPERTY OF RELIANCE FOUNDRY CO. LTD.
Unit 207, 6450 - 148 Street, Surrey, BC V3S 7G7, Canada
1-877-789-3245 [email protected]
www.reliance-foundry.com
Bollard Post R-7902General Description:
Make a pronounced statement on entry to your
streetscape, business, park, school or stadium with the
contemporary and practical design of the model R-7902
steel bollard. A staple of the product line, it will
complement the aesthetics of almost any architectural
style. It can be embedded in new concrete or
surface-mounted on existing concrete. For locations
where access needs fluctuate, it can also be installed
with removable or fold down mountings. The model
R-7902 can be finished in one of seven different
powder-coated color options and it is kept in stock,
available to ship immediately.
Specifications:
Height: 36" ( Above Grade )
Base Diameter: 4 3/8"
Weight: 31 lbs ( Bollard Post Full Length )
Material: Steel ( ASTM A36 )
Finish Options:
Polyester Powdercoated
See Reliance Foundry's standard color options at:
www.reliance-foundry.com/bollard/colors-bollards
Installation Options:
Fixed - Embedded Mounting in New Concrete
(see sheet 2 of 7)
Fixed - Flanged in Existing Concrete
(see sheet 3 of 7)
Removable - Receiver with Lid in New Concrete
(see sheet 4 of 7)
Removable - Receiver with Chain in New Concrete
(see sheet 5 of 7)
Removable - Fold Down Mounting in Existing Concrete
(see sheet 6 of 7)
For more information on bollard post installation, please visit:
www.reliance-foundry.com/bollard/installation-bollards
Accessory Options:
Optional - Chain Accessories Installation Details
(see sheet 7 of 7)
Care and Maintenance:
Reliance's line of bollards are finished with a long-lasting
powder-coating. Proper care and maintenance are required.
Regularly-performed inspections and routine cleaning will
ensure that a bollard retains its aesthetic appeal and does not
become damaged by the elements.
See Reliance Foundry's maintenance guide at:
www.reliance-foundry.com/bollard/maintenance-bollards
Notes:
1) Embedment details are for reference illustration only. Minimum foundation sizes depend on local soil conditions,
weather conditions, and engineering requirements.
2) Bollard post is provided as shown. Concrete, foundation and/or installation ordered separately or provided by others.
3) Minimum foundation sizes depend on local soil conditions, weather conditions, and engineering requirements.
4) Dimensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension
is critical to your particular installation.
5) Reliance Foundry reserves the right to amend design and specifications without prior notice for product improvement.
5 1/4Approx. Ground Clearance
at Fold Down Position
87 6
3
4
9
1
5
2
79
7
9
36
3/8
Grade
Concrete Pavement
4 3/8
1/8 Wall
PARTS LIST
MATERIALDESCRIPTIONPART NUMBERITEM
Steel Powder CoatedOptional Chain Eye 3/8"Chain Eye 3/8" (Optional)1
Steel Powder CoatedOptional Quick Link ConnectorQuick Link Connector (Optional)2
Steel Powder CoatedOptional Chain 5/16" (Sold by Length)Chain 5/16" (Optional)3
Choice of Brass or Stainless SteelOptional Padlock (Brass or Stainless Steel)Padlock (Optional)4
PARTS LIST
DESCRIPTIONPART NUMBERQTYITEM
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET 7 OF 7
DWG NO
R-7902
TITLE
Bollard Post R-7902
SIZE
C
NOT TO SCALE
REV
C1
COPYRIGHT RESERVED THIS PLAN DRAWING AND DESIGN ARE, AND AT ALL TIMES REMAIN, THE EXCLUSIVE PROPERTY OF RELIANCE FOUNDRY CO. LTD.
Unit 207, 6450 - 148 Street, Surrey, BC V3S 7G7, Canada
1-877-789-3245 [email protected]
www.reliance-foundry.com
Bollard Post R-7902General Description:
Make a pronounced statement on entry to your
streetscape, business, park, school or stadium with the
contemporary and practical design of the model R-7902
steel bollard. A staple of the product line, it will
complement the aesthetics of almost any architectural
style. It can be embedded in new concrete or
surface-mounted on existing concrete. For locations
where access needs fluctuate, it can also be installed
with removable or fold down mountings. The model
R-7902 can be finished in one of seven different
powder-coated color options and it is kept in stock,
available to ship immediately.
Specifications:
Height: 36" ( Above Grade )
Base Diameter: 4 3/8"
Weight: 31 lbs ( Bollard Post Full Length )
Material: Steel ( ASTM A36 )
Finish Options:
Polyester Powdercoated
See Reliance Foundry's standard color options at:
www.reliance-foundry.com/bollard/colors-bollards
Installation Options:
Fixed - Embedded Mounting in New Concrete
(see sheet 2 of 7)
Fixed - Flanged in Existing Concrete
(see sheet 3 of 7)
Removable - Receiver with Lid in New Concrete
(see sheet 4 of 7)
Removable - Receiver with Chain in New Concrete
(see sheet 5 of 7)
Removable - Fold Down Mounting in Existing Concrete
(see sheet 6 of 7)
For more information on bollard post installation, please visit:
www.reliance-foundry.com/bollard/installation-bollards
Accessory Options:
Optional - Chain Accessories Installation Details
(see sheet 7 of 7)
Care and Maintenance:
Reliance's line of bollards are finished with a long-lasting
powder-coating. Proper care and maintenance are required.
Regularly-performed inspections and routine cleaning will
ensure that a bollard retains its aesthetic appeal and does not
become damaged by the elements.
See Reliance Foundry's maintenance guide at:
www.reliance-foundry.com/bollard/maintenance-bollards
Optional Chain Accessories Installation Details
Contractor/Installor Alert:
Please give consideration to the location
of the chain eye and the padlock pin
when installing removable bollard receiver.
It is important that the removable
bollard receiver padlock pin is oriented
in the same direction as the chain is
intended to flow.
1
2
3
4
1
2
3
4