SHEAR TYPE for Wire Rope An excellent cutter for steel cable and wire rope. Notched jaw holds and locks cable in cutting position. Shearing action of blades cuts coarse or lined stranded cable or rope with minimum distortion. Metal handles. ANGULAR STYLE BOLT CUTTER The cutting edges of these cutters are offset 30 o from metal handles to keep work in sight while cutting. This offset also facilitates flush cutting and keeps user's hands clear of work surface. Wire Rope, Stainless & Wgt Repl Cat. No. Lgth Aircraft Cable lbs. Head 1490MTN 14" 1/4" 2.75 1413TN 190MTN 24" 3/8" 5 113TN 390MTN 36" 5/8" 12" 313TN 590MTN 42" 3/4" 17" 513TN BOLT AND CABLE CUTTERS Medium Wgt Repl Cat. No. Lgth Soft Hard lbs. Head 1490MAF 14" 5/16" 1/4" 3 1413AF 190MA 24" 7/16" 3/8" 5.5 113A 390MA 36" 9/16" 1/2" 13 313A Cat. No. 8948050 Cuts 1.25"- 1.50" O.D. Cat. No. 8948060 Cuts 2"- 2.375" O.D. HEAVY DUTY, With Keeper Swing-away keeper holds EHS guy wire and pre-stressed cable in correct cutting position and prevents cable from spreading or deforming. Assures clean, complete cutting of all strands. Also cuts hard bolts, rods, bars, etc. Hard Metals Wgt Repl Cat. No. Lgth EHS Guy, ACSR lbs. Head 190MCK 24" 5/16" 6.5 113MCK 390MCK 36" 7/16" 14.5 313MCK GENERAL PURPOSE, Clipper Cut Designed for close of flush cutting to a surface. Blades are beveled on one side only. Clipper cut style is not designed to cut hard materials. Maximum hardness of materials to be cut: Brinell 300, Rock C31 Medium Wgt Repl Cat. No. Lgth Soft Hard lbs. Head 1490MNE 14" 5/16" 1/4" 2.75 1413NE 090MNE 18" 3/8" 5/16" 3.5 013NE 190MNE 24" 7/16" 3/8" 5.25 113NE 290MNE 30" 1/2" 7/16" 8.5 213NE 390MNE 36" 9/16" 1/2" 13 313NE BOLT & CABLE CUTTERS Bolt & Cable Cutters POLY PIPE CUTTER 42 HI-LINE UTILITY SUPPLY CO. Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
Transcript
SHEAR TYPE for Wire RopeAn excellent cutter for steel cable and wire rope.
Notched jaw holds and locks cable in cutting position. Shearing action of blades cuts coarse or lined stranded cable or rope with minimum distortion. Metal handles.
ANGULAR STYLE BOLT CUTTERThe cutting edges of these cutters are offset 30o
from metal handles to keep work in sight while cutting. This offset also facilitates flush cutting and keeps user's hands clear of work surface.
HEAVY DUTY, With KeeperSwing-away keeper holds EHS guy wire and
pre-stressed cable in correct cutting position and prevents cable from spreading or deforming. Assures clean, complete cutting of all strands. Also cuts hard bolts, rods, bars, etc.
Hard Metals Wgt Repl Cat. No. Lgth EHS Guy, ACSR lbs. Head
GENERAL PURPOSE, Clipper CutDesigned for close of flush cutting to a surface.
Blades are beveled on one side only. Clipper cut style is not designed to cut hard materials. Maximum hardness of materials to be cut: Brinell 300, Rock C31
HEAVY DUTY, Center CutSpecial heavy-duty straps extend along cutting
edges to support center cut style jaws, giving longer jaw life than general purpose, center cut tools. Max. hardness of material to be cut: Brinell 400, Rock C42.
same as above with FIBERGLASS HANDLES
Hard Metal, Wire Wgt Repl Cat. No. Lgth Mesh, Rebar lbs. Head
Two pocket, yellow vinyl. Order aerial bucket hooks separately (pg. 193)
CENTER CUT JAW
Hardened shear-type cutting jaws mounted on fiberglass handles cut without deforming cable.
POWER & COMMUNICATIONSCABLE CUTTERS
Rugged cable cutter with fiberglass handles. Two handed shear type cutterhead for clean cuts.
10-202
C403-1421C403-1422
C403-1423
COMMUNICATIONS CABLECUTTER
Designed for cutting lead and rubber covered communications cable. Shearing action of jaws gives clean, sharp cut with minimum distortion. Extremely rugged cutters but should not be used for hard cable or ACSR. Metal handles.
CUTTERS FOR SOFT METAL (COPPER & ALUMINUM)
BOLT & CABLE CUTTERSB
olt &
Cab
le C
utte
rs Cat. No. 63050 This handy economical tool handles most cable cutting jobs with ease. Special high leverage design gives it amazing cutting capability for it's size. Shear type jaws cut up to 4/0 aluminum, 2/0 soft copper, and 100 pair 24 gauge communication cable. At only 9-1/2" long it fits into a tool pouch.
ONE HAND RATCHET CUTTERSThese "tool pouch" sized cable cutters will cut copper,
aluminum, and communications cable using only one hand. Molded grips provide a comfortable, non-slip grip. Built to last!
NOT FOR USE ON STEEL OR ACSR
CUTTERS FOR SOFT METAL (COPPER & ALUMINUM)
These patented conductor cutters are half the size and weight of standard ratchet cutters. The design of these compact cutters is based on a simple ratchet mechanism and sure ratcheting action makes working with them easy. At less than 20" long, they will fit into tool bags or boxes.
Cat. No. Alum,Copper ACSR Guy Wgt
HL1000 2.375" (2000mcm) No No 4.2 lbs. HL2000 3.375" No No 3.5 lbs
These heavy duty cable cutters utilize shear type cutting blades for fast, clean cuts. Two styles are available for cutting soft cables up to 3" dia. Refer to the table below to choose the model which best suits your needs.
CUTTERS FOR SOFT METAL (COPPER & ALUMINUM)
REPL. HEADS & REPAIR PARTS ON PAGE 293
Cat. No. 87This ACSR cable trimmer reduces
cable preparation time by as much as 70%. Operation, similar to conventional tubing cutter, is fast and easy. Trims aluminum conductor strands clean and square without nicking steel reinforcement strands below. Made of light weight, rugged, aluminum alloy. Accepts all standard bushing sizes shown to the right.
OTHER BUSHING SIZES are avail-able and may require #87-S special trimmer and special bushing holder. Special bushing holders are made to exact spec of one cable size only. Advise cable O.D., core O.D., strand-ing, and cir. mils when ordering specials.
These heavy duty cable cutters utilize shear type cutting blades for fast, clean cuts. Three styles available for cutting ACSR cable up to 954MCM, and guy strand up to 5/8".
CUTTERS FOR HARD CABLE (ACSR, GUY STRAND, GROUND ROD)
Cat. No. HL556HThis patented
conductor cutter is half the size and weight of standard ratchet cutters. Cuts 556mcm (.95") ACSR and 2" Cu and Al. The design of this compact cutter is based on a simple ratchet mechanism and sure ratcheting action makes working with them easy. NOT for use on Guy Strand. 20" long. 4.5 lbs.
BOLT & CABLE CUTTERS
Cat. No. 63800ACSR This cutter offers easy cutting
(477MCM ACSR; 1/2" guy strand; 1" Cu) with a size that fits in a tool pouch. Cutting inserts are easily replaced by simply removing 3 screws per blade. 1 year warranty. Length: 14"
Cat. No. 63858 Replacement cutting insert with screws
Cat. No. HL336H
This "tool pouch" size ratchet cutter is designed to cut up to 350MCM copper and 336MCM ACSR conductor (single steel core only). 10" Long; 1.2 lbs
Bolt &
Cable C
utters
RATCHET CUTTER - 336MCM ACSRCat. No. 63607
This compact, lightweight cutter cuts up to 336mcm ACSR, 400mcm Au, and 600mcm Al. Unique ratchet action holds cable tight and allows rapid, straight cuts with minimum effort. Quick-release lever opens blade at any time during operation. 10.25" long, 1.5 lbs
lightweight cutter has extra heavy duty blade design and fiberglass handles with PVC covers. Cuts up to 954 MCM ACSR and 1000MCM Cu. 22.75" long. 6.5 lbs.
RATCHET CUTTER - 954MCM ACSR
RATCHET CUTTER - 556MCM ACSR
RATCHET CUTTER - 336MCM ACSR
BOLT & CABLE CUTTERS
BATTERY CUTTERS FOR HARD CABLE (ACSR, GUY STRAND, GROUND ROD)
Bol
t & C
able
Cut
ters
Capacity: ACSR, copper, and aluminum up to 1"; guy wire up to 7/8"; ground rod and EHS guy wire up to 5/8"Battery: 14.4V Ni-MH (Cat. No. HL1435)Weight: 9.9 lbs with batteryHead Rotation: 180o
Warranty: 5 year (tool), 1 year (battery)Replacement Blade: Cat. No. 6420216
Cat. No. DescriptionCB25 Kit with 120V AC ChargerCB25-DC Kit with 12V DC Charger
Kit Includes: (1) Tool(2) Batteries (1) Charger(1) Case
120V AC ChargerCat. No. HL1804
12V DC ChargerCat. No. HL1822
Jaw Opening: .95"Capacity: ACSR up to 477MCM; ground rod and guy wire up to 5/8"Battery: 14.4V Lithium Ion (Cat. No. BP-80 )Weight: 10.8 lbs with batteryWarranty: 5 years (tool and battery)Replacement Blade: Cat. No. 24-08
Kit Includes: (1) Tool(2) Batteries (1) 120V Charger(1) Case
120V AC Charger:Cat. No. PATCHGRLI
12V DC Charger:Cat. No. PATCHGR-LIDC
Capacity: ACSR up to 1113AWG; ground rod up to 5/8", copper & aluminum cable up to 1.29", guy strand up to 1/2"Battery: 18V Lithium Ion (Cat. No. BAT18VLI)Weight: 10.2 lbs with batteryHead Rotation: 180o
Warranty: 5 year (tool), 1 year (battery)Replacement Blade: Cat. No. PT10037388 (moving blade) Cat. No. PT10037384 (fixed blade)
BATTERY CUTTERS FOR HARD CABLE (ACSR, GUY STRAND, GROUND ROD)
Capacity: 1590MCM ACSR; copper, and aluminum up to 1-9/16" O.D.; EHS guy wire, wire rope, and steel ground rod up to 3/4" O.DBattery: 14.4V Ni-MH (Cat. No. HL1435)Weight: 16.7 lbs with batteryHead Rotation: 180o
Warranty: 5 year (tool), 1 year (battery)Replacement Blade: Cat. No. 6420140Replacement Blade Pin/Screw: Cat. No. 6760240
Cat. No. DescriptionCB41 Kit with "Pistol Grip" style toolCBT41 Kit with "Suitcase" style tool
120V AC ChargerCat. No. HL1804
12V DC ChargerCat. No. HL1822
Capacity: Copper, aluminum, ACSR, and steel ropes and rods up to 2-3/16” O.D.; EHS guy wire and anchor rod up to 3/4” O.D. Ideal for 795 MCM ACSR drake. Battery: 14.4V Ni-MH (Cat. No. HL1435)Weight: 120.7 lbs with batteryHead Rotation: 327o
Warranty: 5 year (tool), 1 year (battery)Replacement Blade: Cat. No. 6420255 (lower) Cat. No. 6420256 (upper)
Cat. No. DescriptionCB55-A Kit with 120V AC ChargerCB55-A-DC Kit with 12V DC Charger
Kit Includes: (1) Tool(2) Batteries (1) Charger(1) Case120V AC Charger
Cat. No. HL180412V DC ChargerCat. No. HL1822
Kit Includes: (1) Tool(2) Batteries (1) 120V Charger*(1) Case
*add "-DC" to Cat. No. for kit w/12V charger
BATTERY CUTTER - 1-9/16"
BATTERY CUTTER - 2-3/16"
Jaw Opening: 2"Capacity: ACSR up to 2" (including 795MCM ACSR drake); ground rod and guy wire up to 3/4"Battery: 14.4V Lithium Ion (Cat. No. BP-80 )Weight: 23 lbs with batteryWarranty: 5 years (tool and battery)Replacement Blade: Cat. No. 55A-10
Includes a canvas storage bag.Capacity: ACSR, copper, and aluminum up to 1"; guy wire up to 7/8"; ground rod and EHS guy wire up to 5/8"Weight: 7.7 lbs Head Rotation: 180o
Includes storage case.Capacity: ACSR, copper, and aluminum up to 1-9/16"; EHS guy wire, wire rope, and steel ground rod up to 3/4" Weight: 12.8 lbs Head Rotation: 180o
Includes storage case. Ideal for 795MCM ACSR drake.Capacity: ACSR, copper, and aluminum, and steel rods up to 2-3/16"; EHS guy wire and anchor rod up to 3/4" Weight: 18.1 lbs Head Rotation: 327o
Cat. No. CH55-AMax Capacity: 2-3/16"Operating Pressure: 10,000 psiCapacity: ACSR, copper, and aluminum, and steel rods up to 2-3/16"; EHS guy wire and anchor rod up to 3/4" Weight: 14.5 lbs Repl. Blade: Cat. No. 6420255 (lower) Cat. No. 6420256 (upper)
Cat. No. CH41Max Capacity: 1-9/16"Operating Pressure: 10,000 psiCapacity: ACSR, copper, and aluminum up to 1-9/16"; EHS guy wire, wire rope, and steel ground rod up to 3/4"Weight: 8.8 lbs Replacement Blade: Cat. No. 6420140Repl. Blade Pin/Screw: Cat. No. 6760240
HYDRAULIC CUTTERS FOR HARD CABLE (ACSR, GUY STRAND, GROUND ROD)
HYDRAULIC CUTTER - 1"
HYDRAULIC CUTTER - 1-9/16"
HYDRAULIC CUTTER - 2-3/16"
HYDRAULIC CUTTING HEAD - 1-9/16"
HYDRAULIC CUTTING HEAD - 2-3/16"
Cat. No. RHCC129ACSRMax Capacity: 1.29"Operating Pressure: 10,000 psiCapacity: ACSR up to 1113MCM, Ground Rod up to 5/8", EHS Guy Strand up to 3/8", Standard Guy Strand up to 1/2", Copper & Aluminum up to 1.29"Weight: 5.8 lbs Replacement Blades: Cat. No. PT10037388 (moving blade) Cat. No. PT10037384 (fixed blade)
BATTERY CUTTERS FOR SOFT METAL (COPPER & ALUMINUM)
Capacity: Copper, Alum & Telecom cables up to 2"Battery: 14.4V Ni-MH (Cat. No. HL1435)Weight: 12.5 lbs with batteryHead Rotation: 90o
Warranty: 5 year (tool), 1 year (battery)Replacement Blade: Cat. No. 6420231Replacement Blade Pin/Screw: Cat. No. 6370250
Cat. No. DescriptionCB50-S Kit with 120V AC ChargerCB50-S-DC Kit with 12V DC Charger
Kit Includes: (1) Tool(2) Batteries (1) Charger(1) Case120V AC Charger
Cat. No. HL180412V DC ChargerCat. No. HL1822
Capacity: Copper, Alum & Telecom cable up to 3.74" (95mm). Ideal for tri-bundle 750MCM copper.Battery: 14.4V Ni-MH (Cat. No. HL1435)Weight: 14.7 lbs with batteryHead Rotation: 335o
Warranty: 5 year (tool), 1 year (battery)Repl. Blade: Cat. No. 6420236 (lower) & 6420247 (upper)Replacement Blade Pin/Screw: Cat. No. 6370250
Cat. No. DescriptionCB95 Kit with 120V AC ChargerCB95-DC Kit with 12V DC Charger
Kit Includes: (1) Tool(2) Batteries (1) Charger(1) Case120V AC Charger
Cat. No. HL180412V DC ChargerCat. No. HL1822
Jaw Opening: 2-1/8"Capacity: Copper 1000MCM & Aluminum 1500MCM (not for use on steel or ACSR)Battery: 14.4V Lithium Ion (Cat. No. BP-80 )Weight: 7.2 lbs with batteryWarranty: 5 years (tool and battery)
Cat. No. DescriptionREC-54ACM Battery Cutter Kit
Kit Includes: (1) Tool(2) Batteries (1) 120V Charger(1) Case
120V AC ChargerCat. No. CH-90
12V DC ChargerCat. No. CH-90DC
BATTERY CUTTER - 2-1/8"
BATTERY CUTTER - 2"
BATTERY CUTTER - 3.74"
Capacity: Copper, Alum & Telecom cables up to 2-9/16"Battery: 14.4V Ni-MH (Cat. No. HL1435)Weight: 14.1 lbs with batteryHead Rotation: CB65-S - 337o CB65-SSC - 180o
Warranty: 5 year (tool), 1 year (battery)
Kit Includes: (1) Tool(2) Batteries (1) AC Charger*(1) Case
120V AC ChargerCat. No. HL1804
12V DC ChargerCat. No. HL1822
BATTERY CUTTER - 2-9/16"
Cat. No. DescriptionCB65-S Kit with Standard Cutter
CB65-SSC Kit with Scissor Style Cutter
CB65-S CB65-SSC
*add "-DC" to Cat. No. for kit w/12V charger
Cat. No. CHS96-SOperating Pressure: 10,000 psiCapacity: Copper and aluminum cables up to 3-3/4" O.D.Weight: 17.4 lbs Replacement Blade: Cat. No. 6420042 Repl. Blade Pin/Screw: Cat. No. 6560160-772
Cat. No. CH120-SOperating Pressure: 10,000 psiCapacity: Copper and aluminum cables up to 4-3/4" O.D.Weight: 20.1 lbs Replacement Blade: Cat. No. 6420250Repl. Blade Pin/Screw: Cat. No. 6340710
Cat. No. C50-SMax Capacity: 2"Capacity: Copper, Alum & Telecom cable up to 2"Weight: 9.6 lbs Head Rotation: 90o
