www.zeppelin-systems.com

BONDING AT ITS BESTMixing systems for metallic powder coatings

Mixing Technology

+ =

Pigments BondingPowder

Powder coating

Know how: Highest processing quality, maximum pigment protection, prevention of agglomerations

HIGHEST QUALITY

Producing bonded metallic powder coatings requires highly

sensitive processes. First-class, consistently high quality with

circulation stability is not obtained by chance, but with Zeppelin’s

proven technology and perfected process engineering.

Microscopic view Metallic powder coating

Global leader

Decades of experience were necessary to create the world’s most accurate, gentle and reliable system for the bonding process. Our very specific technology combined with product features optimized for bonding ensure absolute process reliability, nearly loss-free production and excellent processing quality of the mixture.

Zeppelin’s HENSCHEL-Mixer®, type process mixer is particularly suitable for the bonding process of glossy metallic powder coatings such as those used in the automotive industry and is now available with optimized design characteristics.

Optimal features

The process mixer features an elaborate temperature control system with 4 cooling zones: drive shaft, mixing tool, double jacket and bottom shell. The system creates a positive agglomeration of the mix and prevents residues from settling in the vessel and onto the tool. Temperature measuring points at various locations ensure precise compliance with the process while the bearing temperatures of the mixing tool shaft are constantly monitored. Control of residual oxygen content and nitrogen inerting comply with the required explosion protection measures.

The entire bonding process can be controlled extremely precisely and offers certified and absolute process reliability. Your advantages: premium quality, efficient production, constant brilliant powder coatings – short amortization period of your plant.

Advantages at a glance:

n Trusted technology – global leader n Guaranteed reproducible quality n Controlled and absolute process reliability n No segregation after the process due to complete bonding n First class brilliance and consistent color quality n Comprehensive range of accessories n Explosion protection for safe operation

Process step 1

Plain powder coating is poured into the mixer. In order to dose the precise amount of nitrogen, the oxygen content is continuously monitored (redundant sensors optional) and the nitrogen inerting is adjusted.

Process step 2

Friction induced energy input heats the mixture until the ideal Tg (softening point temperature / glass transition temperature) of the resin is reached. The effect pigments can now be added.

Process step 3

The temperature will be kept constant for a de�ned period until the pigment powder is bonded to the resin.

Process step 4

The mixture is then cooled gently to avoid excessive agglo m erates from building up. Cooling can take place in the process mixer (at intensive cooling) as well as in a downstream cooling mixer, which also enables filling degrees of up to 85%. This process ensures excellent product qualit y with optimal processing properties.

Step by step to perfect quality

A total of 4 cooling zones ensure reliable stability of the desired temperature

The design characteristics of the process mixer have been further enhanced for the speci�c requirements of effect powder coatings. A very demanding process is required to obtain a premium quality mixture. In the bonding process, the softening point temperature of the resin – to which the effect pigment adheres – is key. The temperature slot at which the texture of this substrate goes from powder to a doughy mass is very narrow. If it has not been reached, the downstream production cycle will be unstable.

Unique cooling concept

Heat is generated by friction during the intensive mixing. These temperature �uctuations are regulated by the individual cooling zones in the mixer. Each cooled module can be regulated and cooled separately. No other mixer comes as close to glass transition temperature as Zeppelin’s HENSCHEL-Mixer®. The result is �rst-class processing quality of these valuable powder coatings.

Better mixing

with know-how Technical data

Type Charge

Laboratory mixer MB 10 1.6 – 3.5 kgProduction mixer combinationMB 75 / KM 150 25 kgMB 200 / KM 350 75 kgMB 350 / KM 1050 130 kgMB 500 / KM 1750 180 kgMB 600 / KM 1750 220 kgMB 800 / KM 2200 280 kgMB 1000 / KM 2200 400 kg

Throughput: 4 batches/hr. at combined operation 2 batches/hr. with process mixer at intensive cooling

32

Discharge with cleaning kit

Swivel design discharge cylinder and hinged cover plate for easier cleaning

Pigment hopper

The feed hoppers are ideal for the bonding application: they are designed according to the amount and pourability of the pigments to be added, offer very good residual discharge, are easy to clean and can be handled safely during transport

Mixing tool

Special self-cleaning one-piece mixing tool with water cooling through the drive shaft right to the tips of the tool blades

Pneumatic hinged lid with de�ector

Hinged design for easier cleaning

Process mixer

Residual oxygen meter

Mixing tool

Special mixing tool for particularly gentle cooling of the mixture

Discharge with cleaning kit

Swivel design discharge cylinder and hinged cover plate for easier cleaning

Hinged lid

Electrically operated to open at 2/3 of the lid for fastest cleaning when changing recipes while maintaining connection to the process mixer

Cooler mixer

Combination of process mixer and cooler mixer

54

Laboratory mixer

Perfect bonding quality in laboratory scale for your color development and production upscaling

© Z

eppe

lin S

yste

ms

GmbH

| Su

bjec

t to

mod

i�ca

tions

with

out n

otic

e | E

ditio

n 03

/17

| 031

1017

13 |

ww

w.la

ke-o

f-con

sens

.com

Global presence

n Australia

n Belgium

n Brazil

n China

n France

n Germany

n India

n Italy

n Korea

n Russia

n Saudi Arabia

n Singapore

n United Kingdom

n USA

Presented by:

Zeppelin Systems GmbH Mixing Technology Henschelplatz 1 34127 Kassel Germany

Tel.: +49 561 801 - 7070 Fax: +49 561 801 - 5930

henschel@zeppelin.com www.zeppelin.com

For the complete Zeppelin Systems range please visit our website at www.zeppelin-systems.com