BOOKS / MONOGRAPHS - FLOGEN Star OUTREACH · BOOKS / MONOGRAPHS 1. W. Johnson and A.G. Mamalis...

BOOKS / MONOGRAPHS

1. W. Johnson and A.G. Mamalis

“Engineering Plasticity: Theory of Metal Forming Processes”

Springer-Verlag, (CISM Courses and Lectures No 139), Wien, 1977, pp. 345


“Crashworthiness of Vehicles”

Mechanical Engineering Publications Ltd, London, 1978, pp. 129


“Gegenüberstellung statischer und dynamischer Schadens oder

Deformations- erscheinungen“

Fortschritt-Berichte der VDI-Zeitschriften, Reihe 5, Nr. 32, Düsseldorf,

1977, pp. 78


“Aspects of Mechanics in Some Sports and Games”

Fortschritt-Berichte der VDI-Zeitschriften, Reihe 2, Nr.17, Düsseldorf, 1977,

pp. 46


“Plasticity and Metal Forming”

Hellenic Steel Publications, Thessaloniki, Greece, 1978, pp. 85


“Aspects of the Plasticity Mechanics of Some Sheet Metal Forming

Processes” Hellenic Steel Publications, Thessaloniki, Greece, 1978, pp. 52

7. W. Johnson, A.G. Mamalis, M.C. de Malherbe and N.K. Tönshoff “Ultra-

High Pressure Equipment and Techniques Mainly for Synthesizing Diamond

and Cubic Boron Nitride”


1979, pp. 101

8. R. de Malherbe, A.G. Mamalis, M.C. de Malherbe and A. Parson

“Risk Analysis in Some Production and Refining Systems in the Petroleum

Industry”

Fortschritt-Berichte der UDI-Zeitschriften, Reihe 16, Nr. 12, Düsseldorf, 1981,

pp. 129

2

9. R. de Malherbe, A.G. Mamalis, M.C. de Malherbe and M.L. Giddings

“Risk Analysis in Transportation Systems”


1981, pp. 115

10. W. Johnson, A.G. Mamalis, and S.R. Reid

“Aspects of Car Design and Human Injury”

Chapter 4 in “Human Body Dynamics. Impact, Occupational and

Athletics, Aspects”,

Ed. D.N. Ghista, Oxford University Press, 1982, pp. 164/180

11. W. Johnson, S.R. Reid and A.G. Mamalis

“Human Body Mechanics in Some Sports and Games”

Chapter 15 in “Human Body Dynamics: Impact, Occupational and

Athletics, Aspects”, Ed. D.N. Ghista, Oxford University Press, 1982, pp.

524/542

12. A.G. Mamalis, R. Schulze and N.K. Tönshoff

“On the Hard-Rock Removal Processing”

PMT-TAP Technical Assistance Programme, Bombay, India, 1982, pp.

64

13. R.de Malherbe, S. Doswell, A.G. Mamalis and M.C. de Malherbe

“Synthetic Fuels from Coal”


1983, pp. 228

14. R. de Malherbe, S. Doswell, A.G. Mamalis and M.C. de Malherbe

“Synthetic Crude from Oil Sands”


1983, pp. 109


“Common Defects in the Processing of Metals and Composite Materials”

Chapter 40 in “Plasticity Today. Modelling, Methods and Applications”

Eds. A. Sawczuk and G.Bianchi, CISM, Udine, Italy, Elsevier Applied

Science Publishers, Amsterdam, 1984, pp. 745/766

16. A.G. Mamalis, A.D. Houndras and M.B. Ioannidis

“Flexible Manufacturing Systems in Metal Forming”


1989, pp. 61

3

17. A.G. Mamalis, D.E. Manolakos and G.L. Viegelahn

“Deformation Characteristics of Crashworthy Components”

Fortschritt-Berichte der VDI-Zeitschriften, Reihe 18, Nr.62, Düsseldorf,

1989, pp. 343

18. A.G. Mamalis, N.M. Vaxevanidis and A.P. Karafillis

“Surface Integrity and Formability of Thin Steel Sheet”

Fortschritt-Berichte der VDI- Zeitschriften, Reihe 2, Nr. 197,

Düsseldorf, 1990, pp. 219

19. A.G. Mamalis, D.E, Manolakos, G.A. Demosthenous and M.B. Ioannidis

“Crashworthiness of Composite Thin-Walled Structural Comnonents”

Technomic Publishing Co, Lancaster, PA, USA, 1998, pp.269

20. A.G. Mamalis, A. Szalay, D.E, Manolakos and G. Pantazopoulos

“Processing of High Temperature Superconductors at High Strain Rates”

Technomic Publishing Co, Lancaster, PA, USA, 2000, pp.278

21. A.G. Mamalis, K. Miya, M. Enokizono and A. Kladas (Eds)

“Proceedings of the 1st Japanese-Greek Joint Workshop on

Superconductivity and Magnetic Materials”

Athens, Greece, 1999, pp.230

22. A.G. Mamalis

“On the Side Impact of Hollow Composite Rail Body Shells”

Chapter 4 in “Advanced in Dynamics and Impact Mechanics”, Eds. C.A.

Brebbia and G.N. Nurick, WIT Press, 2003, pp. 87/113

23. M. Enokizono and A.G.Mamalis

“Superconductivity and Magnetic Materials”

(Proceedings of the 2nd Japanese-Greek Joint Workshop on

Superconductivity and Magnetic Materials)

JSAEM Studies in Applied Electromagnetics and Mechanics 12, Oita,

Japan,

2001, pp. 163

24. A.G. Mamalis, M. Enokizono and A. Kladas (Eds.)

“Applied Electromagnetic Engineering for Magnetic, Superconducting

and Nano- Materials”

(Proceedings of the 6th Japanese-Mediterranean Workshop on Applied

Electromagnetic Engineering for Magnetic, Superconducting and Nano-

Materials)

Materials Science Forum, Trans Tech Publications Ltd,

Laubisrutistr,

Switzerland, 2010, pp. 360

4

25. A.G. Mamalis, A. Kladas and M. Enokizono (Eds.)

“Applied Electromagnetic Engineering for Magnetic, Superconducting

and Nano-Materials”


Electromagnetic Engineering for Magnetic, Superconducting and Nano-

Materials, Budapest, Hungary, July 2011)

Materials Science Forum, Trans Tech Publications Ltd, Laubisrutistr,

Switzerland, Vol. 721, 2012, pp. 354

26. A.G. Mamalis and A.K. Vortselas

“Deformation of Materials from Macro- to Nanoscale: Aspects of

Numerical Modeling”

Chapter 1 in: “Horizons in Computer Science Research”, Vol. 8, Ed. T.S.

Clary, Nova Publishers, New York, 2013, pp. 1/ 45

27. A.G. Mamalis, A. Kladas and M. Enokizono (Eds.)

“Applied Electromagnetic Engineering for Magnetic, Superconducting,

Multifunctional and Nano-Materials”


Electromagnetic Engineering for Magnetic, Superconducting,

Multifunctional and Nano-Materials, Athens, Greece, June 2013)



28. T. Prikhna, W. Gawalek, Y. Savchuk, A.G. Mamalis, V. Tkach, H.

Weber, T. Habisreuther, M. Eisterer, W. Karau, M. Wendt, N. Sergienko,

V. Moshchil, A. Kozyrev, P. Nagorny, C. Schmidt, V. Melnikov, J.

Dellith, D. Litzkendorf, J. Noudem, X. Chaud, V. Sverdum and A.

Starostina

“High pressure synthesized magnesium diboride and dodecaboride-based

superconductors: Structure and properties”

in “Specialized Collections Vol. 4: Superconductors and Super-

conductivity”, Ed. S. Kolisnychenko, Trans Tech Publications Ltd,

2015, pp.19-25

29. T. Prikhna, M. Eisterer, W. Gawalek, A.G. Mamalis, A. Kozyrev, V.

Kovylaev, E. Hristoforou ,H.W. Weber, J. Noudem, W. Goldacker, V.

Moshchil, X. Chaud , V. Sokolovsky, A. Shaternik, I. Dellith, C.

Schmidt, T. Habisreuther, D. Litzkendorf, S. Dub, A. Borimskiy, N.

Sergienko, V. Sverdun and E. Prisyazhnaya

“Structure and functional properties of bulk MgB2 superconductors synthesized and sintered under pressure”

in “Specialized Collections Vol. 4: Superconductors and Super-


2015, pp. 30-35

5

30. A.G. Mamalis, I.D. Theodorakopoulos and A.K. Vortselas

“Numerical simulation of explosively compacted powder–in–tube

MgB2 superconductors” in “Specialized Collections Vol. 4: Superconductors and Super-


2015, pp. 385-390

31. A.G. Mamalis, A. Kladas, M. Enokizono and V. Lazarov (Eds.)

“Applied Electromagnetic Engineering for Advanced Materials from

Macro- to Nanoscale”



Multifunctional and Nano-Materials, Sofia, Bulgaria, July 2015)



32. A.G. Mamalis, M. Enokizono, A. Kladas, T. Sawada, M. Güden and

M.M. Demir (Eds.)

“Applied Electromagnetic Engineering for Advanced Materials from

Macro- to Nanoscale under Static-to Shock Loading”



Multifunctional and Nano-Materials, Izmir, Turkey, July 2017)

Materials Science Forum, Trans Tech Publications Ltd, Switzerland,

Vol. 915, 2018, pp. 274, ISBN: 978-3-0357-1221-6

1

TEXTBOOKS

1. A.G. Mamalis

“Manufacturing Processing”,

Michigan Technological University, Houghton, Michigan, USA, 1982,

pp.255

2. E. Chu, G.L. Viegelahn and A.G. Mamalis

“ME-303: Laboratory Experimental Manual”

Michigan Technological University, Houghton, Michigan, USA, 1991,

pp.80

3. A.G. Mamalis

“Manufacturing Technology”

National Technical University Press, Athens, Greek, 1987, pp.680 (in

Greek)

4. A.G. Mamalis

“Introduction to Workshop Technology”

National Technical University Press, (in Greek) Athens, Greek, 1986,

pp.105 (in Greek)

5. A.G. Mamalis

“Manufacturing Technology: Laboratory Experimental Manual”

Phoebos Press, Athens, Greece, 1996, pp.183 (in Greek)

6. I. Vajda, A.G. Mamalis, J. Bankuti and A. Szalay (Eds.)

“Textbook of the 2nd International Summer School of High Temperature

Superconductivity”, Vol. I

Budapest Technical University Press, Budapest Hungary, 1996, pp.265

7. A.G. Mamalis

“Manufacturing Technology: Metallic Materials”

Phoebos Press, Athens, Greece, 1997, pp.367 (in Greek)

8. A.G. Mamalis

“Manufacturing Technology: Dynamic Deformation of Materials”

Anosi Press, Athens, Greece, 1998, pp.226 (in Greeek)

9. A.G. Mamalis

“Manufacturing Technology: Non-Conventional Processes”

Anosi Press, Athens, Greece 2000, pp.400

2

10. N. Verezub, E. Westkämper, Yu. Vnukov, A. Grabchenko, K. Grey, L.

Dϋbner, V. Zaloga, V. Zubar, M. Kawalek, J. Kundrak, F. Lierath, A.G.

Mamalis, H. Osanna, D. Paulmier, H. Popke and M. Horwath

“Working Processes of Hihg Technology in Mechanical Engineering”

Kh, SPU Kharkov, Ukraine, 1999, pp.436 (in Russian)

11. A.G.Mamalis

“Manufacturing Technology: Plasticity and Metal Forming”

Phoebos Press, Athens, Greece, 2007, pp. 500 (in Greek)

12. A.G.Mamalis

“Manufacturing Technology: Metal Removal Processing”

(Macro-, Micro-and Nanoprocessing)

Phoebos Press, Athens, Greece, 2008, pp. 500 (in Greek)

Ph.D. THESIS

1. A.G.Mamalis

“Profile Ring-Rolling”

University of Manchester Institute of Science and Technology (UMIST)

Department of Mechanical Engineering, Applied Mechanics Division

(Supervisor: Professor William Johnson), 1975, pp. 400

1

PAPERS

1. A.G. Mamalis and T.Ι. Theofanopoulos

“Hydromechanical deep-drawing”

Technica Chronica (Journal of the Institution of Greek Engineers), Vol. 42, pp.

621/641, 1973 (in Greek)

2. A.G. Mamalis, J.B. Hawkyard and W. Johnson

“Cavity formation in rolling profiled rings”

International Journal of Mechanical Sciences, Vol. 17, pp. 669/672, 1975

3. A.G. Mamalis, J.B. Hawkyard and W. Johnson

“Spread and flow patterns in ring-rolling”


4. W. Johnson, A.G. Mamalis and H. Hunt

“Small spherical lead shot forming from the liquid, using a shot tower”

Metallurgia and Metal Forming, Vol. 43, pp. 68/72, 1976

5. A.G. Mamalis, W. Johnson and J.B. Hawkyard

“Ring-rolling: Literature review and some recent experimental results”

Metallurgia and Metal Forming, Vol. 43, pp. 132/140, 1976


“On the pressure distribution between stock and rolls in ring-rolling”

Journal of Mechanical Engineering Science, Vol. 18, pp. 184/195, 1976


“Pressure distribution, roll force and torque in cold ring-rolling”

Journal of Mechanical Engineering Science, Vol. 18, pp. 196/209, 1976


“Neue Untersuchungen beim Ringwalzen”

Archiv für das Eisenhüttenwessen, Vol. 47, pp. 613/618, 1976


“Untersuchungen über die Breitung und den Werkstoffluss beim Ringwalzen”

Archiv für das Eisenhüttenwessen, Vol. 47, pp. 619/622, 1976


“A survey of some physical defects arising in metal working processes”

Proc. l7th International Machine Tool Design and Research Conference,

Birmingham, September 1976, ΜcΜillan Press, 1977, pp. 607/621

11. A.G. Mamalis

“A report an the Euromech '81 International Colloquium an the Impact Loading of

Bodies”


2

12. A.G. Mamalis, W. Johnson and J. Lewis

“Forming of superplastic zinc-aluminium sheet into a re-entrant die”

Metals Technology, Vol. 4, pp. 160/166, 1977


“Gegenüberstellung statischer und dynamischer Schadens-oder Deformations-

erscheinungen”

VDI-Zeitschrift, Vol. 119, pp. 307/308, 1977


“The fracture in some explosively end-loaded bars of plaster of Paris and Perspex

containing transverse holes or changes in section”



“Fracture development in solid Perspex spheres with short cylindrical projections

(bosses) due to point explosive loading”


16. W. Johnson, A.G. Mamalis and Y. Mihara

“The compression loading of solid spheres of plaster of Paris”


17. A.G. Mamalis

“Determination of the stresses in the flange of a blank during deep-drawing of

complex shapes, using a slip-line field theory”

Technica Chronica (Journal of the Institution of Greek Engineers), Vol. 46, Νο 3/4,

pp. 23/32, 1977 (in Greek)


“Aspects of mechanics in some sports and games”

VDI-Zeitschrift, Vol. 119, pp. 999/1000, 1977


“Fracture and void development in hemi-spherical ended Perspex rods due to stress

waves from detonators”

Proc. IUTAM Symposium on High Velocity Deformation of Solids, Tokyo, Japan,

August 1977; Eds. Κ. Kawata and J. Shioiri, Springer-Verlag, 1979, pp. 228/246

20. A.G. Mamalis

“The static compression of Perspex spheres”

Proc. l8th International Machine Tool Design and Research Conference, London,

September 1977, McMillan Press, pp. 49/51

3


“Force polygons to determine upper-bounds and force distribution in plane strain

metal forming processes”


September 1977, ΜcΜillan Press, pp. 11/25

22. A.G. Mamalis, W. Johnson and H.J. Marczinski

“A current state review of the warm-working of metals”


September 1977, McMillan Press, pp. 173/182


“Some force plane diagrams for plane strain slip-line fields”


24. A.G. Mamalis and W. Johnson

“Ring-rolling processes”

Journal of Engineering Production, Vol. 2, pp. 145/162, 1978

25. A.G. Mamalis

“Some metal forming processes now attracting industrial interest”

Technica Chronica (Journal of the Institution of Greek Engineers), Vol. 47, Νο 1,

pp. 30/52, 1978 (in Greek)


“The perforation of circular plates with four-sided pyramidally-headed square-

section punches”


27. A.G. Mamalis

“Gegenwärtige Entwicklungstendenzen auf dem Gebiet der Blechumformung”

VDI-Berichte, Nr. 330, pp. 104/110, Ι978

28. A.G. Mamalis and S.R. Reid

“A note on fracture and deformation in cubical box structures due to impulsive

loading”


29. A.G. Mamalis

“Ultrahochdruck-Anlagen und Ultrahochdruck-Verfahren zum Herstellen vor allem

von synthetischen Diamanten und von kubischen Bornitrid”

VDI-Zeitschrift, Vol. 121, p. 308, 1979


“Ingenious alternatives to the press in metal forming”

Welding and Metal Fabrication, pp. 375/383, 1979

4

31. A.G. Mamalis, R. Schulze and H.Κ. Tönshoff

“Experimental investigations into hard-rock removal processes using a segmental

diamond wheel”

Proc. 20th Internatonal Machine Tool Design and Research Conference,

Birmingham, September 1979, ΜcΜillan Press, pp. 361/371

32. A.G. Mamalis, R. Schulze and H.Κ. Tönshoff

“The slotting of blocks of hard-rock with a diamond segmented circular sawblade”

Industrial Diamond Review, pp. 356/365, 1979

33. W. Johnson, Ν.Κ. Gupta and A.G. Mamalis

“Sand spillage from an open-top rectangular container when in axial collision”

International Journal Vehicle Design, Vol. 1, pp. 61/73, 1979


“Rolling of rings”

International Metals Reviews, Vol. 24, Νο. 4, Review 242, pp. 137/148, 1979

35. W. Johnson, S.K. Ghosh, A.G. Mamalis, T.Y. Reddy and S.R. Reid

“The quasi-static piercing of cylindrical tubes or shells”


36. A.G. Mamalis, H.Κ. Tönshoff and R. Schulze

“The static compression of solid spheres of hard-rock”

Res Mechanica, Vol. 1, pp. 265/275, 1980

37. W. Johnson, A.G. Mamalis and S.K. Ghosh

“On the peen-forming of metals”

Proc. 21st International Machine Tool Design and Research Conference,

Swansea, U.K., September 1980, McMillan Press, pp. 85/93

38. A.G. Mamalis, A. Kandeil, M.C. de Malherbe and W. Johnson

“Defects in cold-hydrostatically extruded aluminium, iron and nickel-base powder

products”

Journal of Mechanical Working Technology, Vol. 4, pp. 327/340, 1980

39. S.K. Ghosh and A.G. Mamalis

“Das Lochen und Lochbördeln von Blechwerkstoffen”

Bänder Bleche Rohre, Vol. 21, pp. 489/495, 1980

40. A.G. Mamalis

“Metal processing technology”

Oryctos Ploutos (Journal of the Institution of Greek Mining Engineers), Νο. 7, pp.

7/24, 1980 (in Greek)

41. A.G. Mamalis

“Energy conservation and recycling in metal processing”


5

42. A.G. Mamalis, W. Wallace, A. Kandeil, M.C. de Malherbe and J-P.A. Immarigeon

“Spread and flow patterns in forging superalloy fibre-reinforced composites”


43. A.G. Mamalis, Κ. Isobe and W. Johnson

“Closed-die forging of rectangular billets with diamond shaped dies”

Annals of the CIRP, Vol. 30, Νο. 1, pp. 147/152, 1981

44. S.K. Ghosh, W. Johnson and A.G. Mamalis

“Βall-drop plate bending: An experimental study of some of its process variables”

Proc. 1st International Conference on Shot-Peening, Senlis-Paris, France,

September 1981, Pergamon Press, pp. 573/579

45. A.G. Mamalis

“Risikoanalyse in Transportsystemen und in Produktionssystemen in der

Erdölindustrie”

VDI-Zeitschrift, Vol. 123, p. 874, 1981

46. A.G. Mamalis

“Energy conservation and recycling in manufacturing metal processing”

Proc. 3. Internationales Kolloquium Schmierstoffe in der Metallbearbeitung,

Technische Academie Esslingen, W. Germany, January 1982, pp. 4.1/4.7

47. A.G. Mamalis

“Energy conservation and materials recycling in Western Germany”

Proc. Int. Conference οn Efficient Energy Utilisation and Material Recycling in

Metal Working, Birmingham, England, March 1982

48. P.S. Theocaris, C.A. Stassinakis and A.G. Mamalis

“Roll pressure distribution and coefficient of friction in hot rolling of strip: An

experimental investigation using the optical method of caustics”

International Journal of Mechanical Sciences, Vοl. 25, pp. 833/844, 1983

49. R. de Malherbe, S.J. Doswell, A.G. Mamalis and M.C. de Malherbe

“Synthetic fuels from coal, synthetic fuels from oil sands”

Brennst.-Wärme-Kraft, Vol. 35, pp. 355/356, 1983


“The quasi-static crumpling of thin-walled circular cylinders and frusta under axial

compression”


51. A.G. Mamalis, S. Diplaris and A. Venetsanos

“Beeinflussung physikalischer Randzoneneigenschaften durch thermische und

mechanische Bearbeitungsverfahren”

Proc. Colloquium on Applied Mechanics, Νational Technical University of Athens,

Greece, September 1983, pp. 118/124 (in Greek)

6

52. Κ. Isobe, W. Johnson and A.G. Mamalis

“Billet deformation during plane strain forging with V-shaped dies”

Proc. Autumn Conference of the Japan Society Technology Plasticity, Sendai,

Japan, 1983, pp. 535/538 (in Japanese)

53. A.G. Mamalis, W. Johnson and G.L. Viegelahn

“The crumpling of steel thin-walled tubes and frusta under axial compression at

elevated strain-rates: Some experimental results”


54. P.S. Theocaris, A.G. Mamalis and C.A. Stassinakis

“On the pressure distribution and the friction coefficient between stock and rolls in

ingot hot-rolling”

Proc. 1st Internatioanl Conference on Technology of Plasticity, Tokyo, Japan,

September 1984, “Advanced Technology of Plasticity 1984”, JSTP, Tokyo, Vol.

1, pp. 321/326

55. N.G. Bilalis and A.G. Mamalis

“On the design and control of flexible manufacturing systems (FMS) for rotational

parts”

Proc. l2th North American Manufacturing Research Conference (NAMRI-ΧΙΙ),

Houghton, Michigan, USA, May 1984, pp. 480/486

56. N.G. Bilalis and A.G. Mamalis

“The flexible manufacturing systems (FMS) in metal removal processing: An

overview”

Journal of Applied Metalworking, Vol. 3, pp. 400/409, 1985

57. A.G. Mamalis, G.C. Vosniakos and S. Diplaris

“On the ball-drop forming of metals”

Proc. l3th North American Manufacturing Research Conference (NAMRI-ΧΙΙΙ),

Berkeley, California, USA, May 1985, pp. 198/203

58. A.G. Mamalis, Κ. Isobe and W. Johnson

“Force polygons for plane strain forging of rectangular billets with diamond-shaped

dies”


59. D.E. Manolakos and A.G. Mamalis

“On ship collisions: The plastic collapse of longitudinally framed shell plating

subjected to oblique lοading”

International Journal of Impact Engineering, Vol. 3, pp. 41/55, 1985

60. A.G. Mamalis

“Recent trends and developments in metal forming”

Proc. 3rd Seminar on Metal Forming, Györ, Hungary, June 1985, pp. 342/355

7

61. A.G. Mamalis and N.G. Bilalis

“Flexible manufacturing systems in metal forming”

Journal of Applied Metalworking, Vol. 4, pp. 130/142, 1986

62. G.L. Viegelahn, A.G. Mamalis and A.J. Zavaliangos

“A note on machining with single-coated tungsten carbide tool of a 5o negative rake

angle”


63. A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn, Ν.Μ. Vaxevanidis and W. Johnson

“On the inextentional axial collapse of thin PVC conical shells”


64. A.G. Mamalis, D.E. Manolakos, F. Saigal, G.L. Viegelahn and W. Johnson

“Extensible plastic collapse of thin wall frusta as energy absorbers”


65. A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn, Ν.Μ. Vaxevanidis and W. Johnson

“The inextentional collapse of grooved thin-walled cylinders of PVC under axial

loading”


66. A.G. Mamalis, G.L. Viegelahn, D.E. Manolakos and W. Johnson

“Experimental investigation into the axial plastic collapse of steel thin-walled

grooved tubes”

International Journal of Impact Engineering, Vol. 4, pp. 117.126, 1986

67. S. Saigal, W. Johnson and A.G. Mamalis

“The plastic collapse of thin-walled small angle frusta under axial load and energy

absorption”

Proc. International Symposium on Intense Dynamic Loading and Its Effects,

Beijing, China, June 1986, pp. 477/485

68. A.G. Mamalis, N.G. Βilalis and M.J. Konstantinidis

“A Fortran based simulator for FMS analysis”

Proc. 1st International Symposium on NC-Robots-FMS, Belgrade, Jugoslavia, May

1986, pp. 57/61

69. A.G. Mamalis and A.J. Zavaliangos

“On the evaluation of the m-yield criterion of anisotropic sheet metals”

Proc. 10th U.S. Νational Congress of Applied Mechanics, Austin, Texas, USA, June

1986

70. A.G. Mamalis and G.C. Vosniakos

“On the surface integrity of mechanically and thermally worked metal plates”

Proc. 10th U.S. Νational Congress of Applied Mechanics, Austin, Texas, USA,

June 1986

8

71. A.G. Mamalis, N.G. Bilalis and M.J. Konstantinidis

“Analysis of tool flow system requirements for an FMS”

Proc. 26th International Machine Tool Design and Research Conference,

Manchester, England, Mc Millan Press, September 1986, pp. 191/198


“Upper and lower bounds for rectangular plates transversely loaded”


73. A.G. Mamalis, A.J. Ζaνaliangοs, Κ. Isobe and W. Johnson

“On the plane plastic flow of forged rectangular billets with diamond-shaped closed

dies”



“Simulierte Leistungsbewertung flexibler Fertigungssysteme”

Werkstatt und Betrieb, Vol. 120, pp. 133/138, 1987

75. A.G. Mamalis, G.C. Vosniakos and A.J. Zavaliangos

“Βal1-drop forming of coated steel sheets”


76. A.G. Mamalis, G. Gioftsidis and W. Johnson

“Fracturing of paraboloidal-ended perspex rods explosively loaded in air and salt

water”



“On simulation modeling for FMS”

Simulation, Vol. 48, pp. 19/23, 1987

78. A.G. Mamalis and G.N. Gioftsidis

“The static and dynamic compaction of powdered materials”

Oryctos Ploutos (Journal of the Institution of Greek Mining Engineers), Vol. 46,

Νο. 50, pp. 27/40, 1987 (in Greek)

79. A.G. Mamalis, G.C. Vosniakos, Ν.Μ. Vaxevanidis and J. Prohaszka

“Macroscopic and microscopic phenomena of electro-discharge machined steel

surfaces: An experimental investigation”


80. A.G. Mamalis and L.P. Hatzikonstantis

“On the Yoshida buckling test of high strength and coated low-carbon steels”


9

81. A.G. Mamalis, L.P. Hatzikonstantis, A.J. Zavaliangos, G.C. Vosniakos and D.E.

Manolakos

“Evaluation of the m-yield criterion of anisotropic sheet metals in predicting limit

strains”

Proc. 3rd International Conference on CAD/CAM and FEM in Metal Working,

Stafford, U.K., April 1987, “CAD/CAM and FEM in Metal Working”, Eds. S.K.

Ghosh and A. Νiku-Lari, Pergamon Press, 1988, pp. 121/141

82. A.G. Mamalis, G.C. Vosniakos and Ν.Μ. Vaxevanidis

“On the surface integrity of mechanically and thermally worked metal plates”

Proc. 2nd International Conference on Technology of Plasticity, Stuttgart, W.

Germany, August 1987, “Advanced Technology of Plasticity 1987”, Ed. Κ. Lange,

Springer Verlag, Vol. 1, pp. 407/414


“Defects in the processing of metals and composite materials”

Proc. 2nd International Conference on Computational Methods for Predicting

Materials Processing Defects, Cachan-France, September 1987, “Studies in Applied

Mechanics 15”, Ed. Μ. Predeleanu, Elsevier, 1987, pp. 231/250

84. A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn and W. Johnson

“The modelling of the progressive extensible plastic collapse of thin-wall shells”



“Limit analysis for laterally loaded stiffened plates”


86. A.G. Mamalis, G.N. Gioftsidis and W. Johnson

“Energy distribution and associated fracture phenomena when explosively loading

paraboloidal-ended perspex rods embedded in lead and air”

Fatigue and Fracture of Engineering Materials and Structures, Vol. 11, pp. 421/433,

1988

87. A.G. Mamalis, G.C. Vosniakos, Ν.Μ. Vaxevanidis and J.Z. Xiong

“Residual stress distribution and structural phenomena of high-strength steel

surfaces due to EDM and ball-drop forming”


88. A.G. Mamalis, A.P. Karaffilis, G.N. Gioftsidis and Ν.Μ. Vaxevanidis

“Effect of mechanical working and electro-discharge machining on the formability

of high-strength steels”

Proc. ASME Symposium on Research and Technological Developments in Non-

Traditional Machining, Chicago, USA, 1988, PED-Vol. 34, pp. 261/272


“On the crumpling of thin plastic closed top-hat sections by compressive loading”

International Journal of Vehicle Design, Vol. 9, pp. 675/686, 1988

10


“Energy absorption and deformation modes of thin PVC tubes internally grooved

when subjected to axial plastic collapse”

Proceedings of the Institution of Mechanical Engineers, Vol. 203, pp. 1/8, 1989

91. A.G. Mamalis, G.N. Gioftsidis and A. Szalay

“Fracture patterns in explosively compacted copper/graphite powder rods”


92. A.G. Mamalis, G.N. Gioftsidis and W. Johnson

“Second reflections and spall fermation in solid perspex spheres due to point

explosive loading in air”


93. A.G. Mamalis

“Knautschverhalten dünnwandiger Rohre aus Kolhenstoffarmen Stahl”

Bänder-Bleche-Rohre, Vol. 30, Νο. 4, pp. 20/24, 1989


“The axial crushing of thin PVC tubes and frusta of square cross-section”



“Crashworthy characteristics of thin fibre-reinforced composite frusta under axial

collapse”


96. A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn and S. Minarecioglu

“The inextentional axial collapse of thin plastic double top-hat sections”


97. A.G. Mamalis, N.G. Bilalis, A.C. Bikos and V.S. Ganovsky

“Flexible automated discrete production of metal components by forging and

machining: A simulation model”

Proc. 1st International Conference on Research and Design of Metal Forming

Machines, Beijing, China, May 1989, pp. 39/46


“The shock wave compaction of copper powder rectangular thin-plates in multi-

dies”

Proc. 10th International Conference on High Energy Rate Fabrication, HERF-89,

Ljubljana, Yugoslavia, September 1989, pp. 92/103

99. A.G. Mamalis, G.N. Gioftsidis, A. Szalay and O. Boday

“The shock wave compaction of high temperature superconducting powders into

cylindrical components”


11

100. A.G. Mamalis, D.E. Manolakos, A.Κ. Baldoukas and G.L. Viegelahn

“Deformation characteristics of crashworthy thin-walled steel tubes subjected to

bending”

Proc. Institution of Mechanical Engineers, Part C, Journal of Mechanical

Engineering Science, Vol. 203, pp. 411/417, 1989


“Crashworthy behaviour of thin-walled tubes of fibreglass composite materials

subjected to axial lοading”

Journal of Composite Materials, Vol. 24, pp. 72/91, 1990

102. G. C. Vosniakos and A.G. Mamalis

“Automated guided vehicle system design for FMS applications”

International Journal of Machine Tools and Manufacture, Vol. 30, pp. 85/97, 1990

103. A.G. Mamalis and N.G. Βilalis

“Control policies for the mixed type FMC for forging and machining of metal

components”

Advanced Manufacturing Engineering, Vol. 2, pp. 11/16, 1990


“Fabrication of superconducting wire by explosive compaction and profile rolling”

Proc. 3rd International Conference on Technology of Plasticity, Kyoto, Japan, July

1990, “Advanced Technology of Plasticity 1990”, Vol. 1, pp. 889/896

105. A.G. Mamalis and G.N. Gioftsidis

“A consolidation mechanism for the compaction of copper powder at high

pressures”

Journal of Materials Processing Technology, Vol. 23, pp. 333/345, 1990

106. A.G. Mamalis, G.N. Gioftsidis and J. Prohazska

“Manufacturing of thin-rectangular plates by explosive compaction of copper

powder”

Proceedings of the Institution of Mechanical Engineers, Part Β, Journal of

Engineering Manufacture, Vol. 204, pp. 237/247, 1990


“Bending of fibre-reinforced composite thin-walled tubes”

Composites, Vol. 21, pp. 431/438, 1990

108. A.G. Mamalis, A.P. Karafillis and Ν.Μ. Vaxevanidis

“Prediction of the limit strains of sheet steel thermally and mechanically worked in

relation to surface integrity: A theoretical model”


12


“Energy dissipation and associated failure modes when axially loading polygonal

thin-walled cylinders”

Thin-Walled Structures, Vol. 12, pp. 17/34, 1991

110. E. Doege, A.G. Mamalis, A. Bramley, F. Osman, Μ. Wianda and H. Naegele

“Project management in a tool design methodology project for precislon forging of

rotational parts”

Proc. 6th International Forum on CAD, Leicester, U.K., September l991, pp.

122/133

111. A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and W. Johnson

“Axial plastic collapse of thin bi-material tubes as energy dissipating systems”


112. A.G. Mamalis, Ν.Μ. Vaxevanidis, A.P. Karafillis and J.Z. Χiong

“Surface treatment of high strength steel plates due to ball-drop forming”

Proceedings of the Institution of Mechanical Engineers, Part Β, Journal of

Engineering Manufacture, Vol. 205, pp. 93/103, 1991

113. A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn, Sin Min Yap and G.A.

Demosthenous

“On the axial crumpling of fibre-reinforced composite thin-walled conical shells”


114. A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn, G.A. Demosthenous and Sin Min

Yap

“Microscopic failure mechanism of thin-walled fibre-reinforced composite frusta

under static axial collapse”


115. E. Doege, A.G. Mamalis, A. Bramley and H. Naegele

“Tool design methodology for precision forging of rotational parts”

EEC BRITE/EURAM Workshop on Machining and Forming, Lοuνain-La Neuve,

Belgium, October 1991

116. Y.Β. Yuan, G.L. Viegelahn and A.G. Mamalis

“Crushing characteristics of composite sections subject to high speed loading”

Proc. 22nd Midwestern Mechanics Conference, Rolla, Missouri, USA, October

1991, “Developments in Mechanics”, Vol. 16, Eds. R.C. Batra and B.F. Armaly,

pp. 468/469

117. G.L. Viegelahn, D.J. Johnson, R.K. Wlosinski and A.G. Mamalis

“Crashworthy characteristics of thin-walled tubes in bending”

Proc. 22nd Midwestern Mechanics Conference, Rolla, Missouri, USA, October

1991, “Developments in Mechanics”, Vol. 16, Eds. R.C. Batra and B.F. Armaly,

pp. 470/471

13

118. G.L. Viegelahn, Κ.Μ. Gorrepati, D.M. Johnson, R.K. Wlosinski and A.G. Mamalis

“Crashworthiness characteristics of composite tubes in bending”

Proc. 7th Annual ASM/ESD Advanced Composites Conference, “Advanced

Composite Materials. New Developments and Applications”, Detroit, USA,

October 1991, pp. 481/487

119. A.G. Mamalis and G.N. Haidemenopoulos

“Aspects of ductility, toughness and formability of steel sheet in relation to

transformation plasticity”


120. A.G. Mamalis, N.G. Bilalis and V.S. Ganovsky

“Simulation of flexible automated systems for the discrete production of metal

components by forging and machining”

International Journal of Advanced Manufacturing Technology, Vol. 7, pp. 44/50,

1992

121. A.G. Mamalis, Ν.Μ. Vaxevanidis and D. Pantelis

“On the electro-discharge machining of ceramic plasma-sprayed steel plates”

Annals of the CIRP, Vol. 41, pp. 235/238, 1992


“On the extrusion of silver-sheathed superconducting billets fabricated by explosive

compaction of YΒa2Cu3O7 powders” Journal of Materials Processing Technology, Vol. 30, pp. 297/313, 1992

123. A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn, D.M. Johnson and A.Κ.

Βa1doukas

“On the effect of shear when bending crashworthy thin-walled steel tubes”

Thin-Wall Structures, Vol. 14, pp. 153/165, 1992

124. A.G. Mamalis, Y.Β. Juan and G.L. Viegelahn

“Collapse of thin-walled composite sections subjected to high speed axial loading”


125. A.G. Mamalis, D.E. Manolakos and G.A. Demosthenous

“Crushing behaviour of thin-walled non-circular fibreglass composite tubular

components due to bending”


126. A.G. Mamalis, Ν.Μ. Vaxevanidis and D. Pantelis

“On the rolling of bimetallic explosively cladded plates”

Proc. 4th International Conference on Technology Plasticity, Beijing, China,

September 1993, “Advanced Technology of Plasticity 1993”, pp. 274/279

14

127. A.G. Mamalis and Ν.Μ. Vaxevanidis

“On the surface integrity and its non-destructive testing determination”

Proc. Workshop on Non-Destructive Testing, Technical Chamber of Greece,

Athens, Greece, June 1993, Technica Chronica (Journal of the Institution of Greek

Engineers), Vol. 63, Νο 5, pp.31/44, 1994 (in Greek)

128. A.G. Mamalis, V.S. Ganovsky and V. Guenova

“System-based approach to the development of a CAPP-system for automated

discrete production”


1994

129. A.G. Mamalis, Ν.Μ. Vaxevanidis, A. Szalay and J. Prohaszka

“Fabrication of aluminium/copper bimetallics by explosive cladding and rolling”


130. A.G. Mamalis, J. Prohaszka, Ν.Μ. Vaxevanidis and A. Szalay

“On the manufacturing of Ag-CdO/Cu bimetallics by explosive cladding and

rolling”

International Journal of Materials and Product Technology, Vol. 9, pp. 334/353,

1994

131. A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and Μ.Β. Ioannidis

“On the bending of automotive fibre-reinforced composite thin-walled structures”


132. A.G. Mamalis, A. Szalay, Ν.Μ. Vaxevanidis and D. Pantelis

“Macroscopic and microscopic phenomena of shape memory nickel/titanium

bimetallic strips fabricated by explosive cladding and rolling”

Materials Science and Engineering, Vol. A188, pp. 267/275, 1994


“Crashworthy characteristics of fibreglass composite automotive frame rails

subjected to bending and axial collapse”

Proc. 27th ISATA Conference on New and Alternative Materials for the

Transportation Industries, Aachen, Germany, October 1994, pp. 371/379

134. A.G. Mamalis, D.M. Manolakos and A.Κ. Baldoukas

“Application of an explicit finite element model in deep-drawing of cylindrical cups

of coated steels”

Proc. 2nd International Conference on Sheet Metal Forming, Belfast, April 1994,

Eds. V.P. Singh, Β. Shirvani and H.J.J. Kals, pp. 153/163


“Axial collapse of thin-walled fibreglass composite tubular components at elevated

strain rates”

Composites Engineering, Vol. 4, pp. 653/677, 1994

15

136. A.G. Mamalis, Ν.Μ. Vaxevanidis and A. Szalay

“Fabrication of trimetallic strips by explosive cladding and rolling”

Proc. 5th International Conference on Metal Forming, Birmingham, U.K.,

September 1994, Journal of Materials Processing Technology, Vol. 45, pp.

407/414, 1994

137. A.G. Mamalis, A. Szalay, D. Pantelis, G. Pantazopoulos, Ι. Kotsis and Μ. Enisz

“Excimer laser surface treatment of high-Tc superconductive ceramic layered plasma sprayed silver plates”

Superconductor Science and Technology, Vol. 8, pp. 470/475, 1995


“The deformation mechanism of thin-walled non-circular composite tubes

subjected to bending”

Composite Structures, Vol. 30, pp. 131/146, 1995

139. A.G. Mamalis, Ι. Malagardis and E. Pachos

“On-line scheduling in metal removal processing using variable schedules and

control strategies”

Computer Integrated Manufacturing Systems, Vol. 8, pp. 35/40, 1995

140. A.G. Mamalis, A. Szalay, D. Pantelis and G. Pantazopoulos

“Fabrication of thick-layered superconductive ceramics (Bi-Pb-Sr-Ca-Cu-O)/metal

composite strips by explosive cladding and rolling”


141. A.G. Mamalis, A. Szalay, D. Pantelis and G. Pantazopoulos

“Net-shape manufacturing of silver/superconductive ceramic/silver rods by

explosive compaction and warm extrusion”

Proc. EXPLOMET '95 Conference, El Paso, Texas, USA, August 1995;

“Metallurgical and Material Applications of Shock-Wave and High-strain-Rate

Phenomena”, Eds. J.L.E. Murr, Κ.P. Staudhammer and Μ.A. Meyers, 1995, pp.

747/754

142. A.G. Mamalis, Ι. Vajda, Μ.Β. Ioannidis, L. Mohacsi and A. Szalay

“Finite difference modelling of magnetic characteristics of high-Tc superconductive ceramics”

Superconductor Science and Technology, Vol. 8, pp. 579/585, 1995


“Analytical and experimental approach to damage and residual strength of

fibreglass composite automotive frame rails during manufacturing”

Proc. 8th International Conference on Composite Structures, Paisley, Scotland,

September 1995; Composite Structures, Vol. 32, pp. 325/330, 1995

16

144. A.G. Mamalis and Ν.Μ. Vaxevanidis

“On the grinding of ceramic layer plasma sprayed metal plates”

Proc. 1st International Machining and Grinding Conference, Dearborn, Michigan,

USA, Society of Manufacturing Engineers, September 1995, pp. 779/794

145. D. Pantelis, A.G. Mamalis and G. Pantazopoulos

“Manufacturing of high-Tc superconducting paths on the surface of metal

conducting substrate using a high power CO2 laser” Proc. EUROMAT '95, 4th European Conference on Advanced Materials and Processes, Venice/Padua, Italy, September 1995, pp. 349/352

146. A.G. Mamalis, Ι. Vajda, L. Mohacsi, Ι. Kotsis and A. Szalay

“From fabrication to application: Ceramic superconductors for the use in

magnetically levitated bearings”

Proc. ECERS, European Ceramic Society Conference, Rimini, Italy, October 1995,

Vol. 7, pp. 167/174

147. A.G. Mamalis, A. Szalay, Ι. Vajda, Μ. Enisz and Β. Palotas

“A novel monolith for electrical applications. Silver sheathed bulk ceramic

superconductor with silver contacts”

Proc. ECERS, European Ceramic Society Conference, Rimini, Italy, October 1995,

Vol. 7, pp. 217/224

148. A.G. Mamalis, D. Pantelis, G. Pantazopoulos and Ν.Μ. Vaxevanidis

“On the thermal treatment of ceramic and superconductive coated plasma- sprayed

metal plates”

Proc. Workshop on Non-Traditional Surface Treatment: Technology and

Applications in Greece, Technical Chamber of Greece, Athens, Greece, March 1995

(in Greek)

149. A.G. Mamalis, D.E. Manolakos and Ν.Μ. Vaxevanidis

“Surface integrity of mechanically surface treated materials”

Proc. Workshop on Non-Traditional Surface Treatment: Technology and

Applications in Greece, Technical Chamber of Greece, Athens, Greece, March

1995; Technica, Νο 117, pp. 19/27, 1996 (in Greek)

150. A.G. Mamalis and Ι. Malagardis

“Determination of due dates in job-shop scheduling by simulated annealing”



“Analysis of failure mechanisms observed in axial collapse of thin-walled circular

fibreglass composite tubes”


17


“The static and dynamic aχial collapse of fibreglass composite automotive frame

rails”


153. A.G. Mamalis, D.E. Manolakos and A.Κ. Baldoukas

“Finite element simulation of axisymmetric preforms for precision forming at

elevated temperatures”

Journal of Materials Processing Technology, Vol. 57, pp.101/111, 1996


“Simulation of the precision forging of bevel gears using implicit and explicit FE

techniques”


155. A.G. Mamalis, A. Szalay, D. Pantelis and G. Pantazopoulos “Net-shape manufacturing of silver-sheathed high-Tc superconductive ceramic (Y-

Βa-Κ-Cu-O) strip by explosive compaction/cladding and rolling”


156. A.G. Mamalis, A. Szalay, D. Pantelis, G. Pantazopoulos, Ι. Kotsis and Μ. Enisz

“Fabrication of multilayered steel/superconductive ceramic (Y-Βa-Κ-Cu-O)/silver

rods by explosive powder compaction and extrusion”



“On the finite element modelling of the deep-drawing of square sections of coated

sheet steels”

Proc. 2nd Asia-Pasific Conference on Materials Processing, Singapore, November

1994; Journal of Materials Processing Technology, Vol. 58, pp. 153/159, 1996

158. A.G. Mamalis, Ι. Kotsis, Ι. Vajda, A. Szalay and G. Pantazopoulos

“High-Tc ceramic superconductors for rotating electrical machines: From fabrication to application”

Proc.10th Anniversary HTS Workshop on Physics, Materials and Applications,

Houston, Texas, USA, March 1996; Eds. Β. Batlogg, C.W. Chu, W.Κ. Chu, D.U.

Gubser, Κ.A. Müller, World Scientific, London, 1996, pp. 631/632

159. Ι. Vajda, A.G. Mamalis and A. Szalay

“Design and construction of an HTSC synchronous machine with permanent

magnet excitation”

Proc. ICEC 16/ICMC, International Cryogenic Engineering Conference,

Kitakyushu, Japan, May 1996

18

160. A.G. Mamalis “Dynamic processing of high-Tc superconductors” Invited Lecture, 2nd International Summer School on High-Tc Superconductivity, Eger, Hungary, July 1996; Eds. Ι. Vajda, A.G. Mamalis, J. Bankuti, A. Szalay, Budapest Technical University Press, pp. 175/220


“Energy absorption capability of fibreglass composite square frusta subjected to

static and dynamic axial collapse”


162. A.G. Mamalis, Ν.Μ. Vaxevanidis and A. Szalay

“Cold rοlling of multi-layer explosively cladded strips”

International Journal of Machine Tools and Manufacture, Vol. 36, pp. 1033/1044,

1996

163. A.G. Mamalis, Ι. Malagardis and Κ. Kambouris

“On-line integration of a process planning module into production scheduling”

International Journal of Advanced Manufacturing Technology, Vol. 12, pp.

330/338, 1996

164. A.G. Mamalis

“Superconductive ceramics. From cooperation in research to cooperation in

University education”

Invited Lecture, Proc. EUROFORUM'96, Veszprem, Hungary, September 1996

165. Ι. Vajda, A.G. Mamalis, A. Szalay and Ν. Göbl

“Design principles of a high-temperature superconducting rotating electrical

machine”

Proc. Int. Conference on Electrical Machines, ICEM 96, Vigo, Spain, September

1996

166. A.G. Mamalis, Ι. Vajda, A. Szalay, Ι. Kotsis and G. Pantazopoulos

“Some small-scale high-temperature superconducting models for applications in

electricity and transportation”

Proc. 5th World Congress on Superconductivity, Budapest, July 1996; Superlattices

and Microstructure, Vol. 21, Supp. A, pp. 251/255, 1997

167. A. Szalay, Ι. Vajda, A.G. Mamalls, Ι. Kotsis, J. Bankuti, Ν. Göbl and Β. Palotas

“A novel metal/ceramic monolith: Silver sheathed bulk high-Tc superconductor with silver contacts”

Proc. 2nd Japan-Central Europe Joint Workshop on Modelling of Materials and

Combustion, Budapest, Hungary, November 1996; Eds. Ι. Barsony, T. Mitani, Μ.

Uesaka, Ι. Vajda, 1997, pp.155/158

19

168. A. Barbagelata, E. Moro, A.G. Mamalis, D.E. Manolakos, A.M. Robinson and D.

Walters

“Hybrid composite structures for crashworthy vehicles”

Proc. 30th ISATA Conference on Materials for Energy-Efficient Vehicles,

Florence, Italy, May 1997, pp. 657/664


“Finite element modelling of stretch forming of coated sheet steel”

Proc. International Conference on Mechanics of Solids and Materials Engineering,

Singapore, June 1995; Journal of Materials Processing Technology, Vol. 68, pp.71

/75, 1997

170. G.C. Vosniakos, Μ. Ziaair-Moayyed and A.G. Mamalis

“Design of a system for computer-aided engineering of manufacturing facilities”


171. A.G. Mamalis, Μ. Robinson, D.E. Manolakos, G.A. Demosthenous, Μ.Β. Ioannidis

and J. Carruthers

“Crashworthy capability of composite material structures: A review”



“The static and dynamic axial crumbling of thin-walled fibreglass composite square

tubes”

Composites Part Β, Vol.288, pp.439/451, 1997

173. A. Grabchenko, Μ. Horvath, A.G. Mamalis, Ι. Meszaros and D. Paulmier

“On the ultraprecision machining of aspherical mirror-surfaces of stainless steels”

Proc. 4th International Conference on Ultraprecision in Manufacturing

Engineering, Braunschweig, Germany, May 1997, pp. 548/549

174. J. Prohaszka, A.G. Mamalis and Ν.Μ. Vaxevanidis

“The effect of electrode material on machinability in wire EDMachining”

Journal of Materials Processing Technology, Vol. 19, pp 233/237, 1997

175. A.G. Mamalis, G. Pantazopoulos, A. Szalay, Ι. Kotsis, Ι. Vajda and D.E. Manolakos

“Multiple-pass warm extrusion of explosively compacted ceramic superconductive

(Y-Βa-Κ-Cu-O)/metal billets”

Applied Superconductivity, Vol. 4, pp.213/229, 1996


“Analytical modelling of the static and dynamic axial collapse of thin-walled

fibreglass composite circular conical shells”

International Journal of Impact Engineering, Vol.19, pp. 477/492, 1997

20


“Experimental investigation of splitting in axially collapsed thick-walled fibre-

reinforced composite frusta”

Proc. Bicentenary Conference on Thin-Walled Structures, University of

Strathclyde, Glasgow, U.K., December 1996; Thin-Walled Structures, Vol. 28, pp.

279/296, 1997


“Simulation of sheet metal forming using explicit FE techniques: Effect of materials

and forming characteristics. Part, Ι. Deep-drawing of cylindrical cups”


179. A.G. Mamalis, D.E. Manolakos and Α.Κ. Baldoukas

“Simulation of sheet metal forming using explicit FE techniques: Effect of materials

and forming characteristics. Part ΙΙ: Deep-drawing of square cups”


180. A.G. Mamalis, Ι. Kotsis, G. Pantazopoulos, Μ. Enisz, Α. Szalay and D.E. Manolakos

“The effect of heat treatment on explosively compacted (Y-Ba-Κ-Cu-O)

superconductive powders”

Physica C - Superconductivity, Vol. 280, pp. 289/296, 1997

181. A.G. Mamalis

“Energy conservation and materials recycling in manufacturing”

Proc. International Workshop on Environmental Conscious Manufacturing-Ecology

and Economy in Metal Forming and Cutting (ICEM-97), Hertogenbosch, The

Netherlands, September 1997, pp. 174/198

182. A.G. Mamalis, Α. Szalay, Ν. Göbl, I. Vajda and Β. Raveau

“Near net-shape manufacturing of metal sheathed superconductors by high energy

rate forming techniques”

Proc. International Workshop οn the Processing and Applications of

Superconducting (RE) BCO Large Grain Materials, Cambridge, U.K., 1997;

Materials Science and Engineering B, Vol. B53, pp. 119/124, 1998

183. A.G. Mamalis, Α. Szalay, Ν.Μ. Vaxevanidis and D.E. Manolakos

“Fabrication of bimetallic rods by explosive cladding and warm-extrusion”


184. Τ. Le Ηuu, D. Paulmier, Α Grabchenko, Μ. Horvath, Ι. Meszaros and Α.G. Mamalis

“Auto-lubrication of diamond coatings at high sliding speed”

Proc. Int. Conference οn Metallurgical and Thin Films, ICMCTF 97, San Diego,

California, USA, April 1998;

Surface and Coatings Technology, Vol. 108/109, pp. 431/436, 1998

21

185. L. Varga, Α.G. Mamalis, Ι. Meszaros, J. Ginsztler, Ζ. Dudas, Β. Hidasi, F. Engyel

and Τ. Werner “On the ultra precision machining of sintered Al2O3”

Journal for Metallurgy and Mining in Hungary, Vol. 131, Νο. 11/12, pp. 375/387,

1998 (in Hungarian)

186. Μ. Schmitt, D. Paulmier, Τ. Le Ηuu, Μ. Εl. Mansori, Α. Grabchenko and Α.G.

Mamalis

“Influence of water vapour and oxygen on the tribological behaviour of diamond

coatings/steel couple”

Proc. 25th International Conference on Metallurgical Coatings and Thin films,

ICMCTF 98, San Diego, California, USA, April 1998;

Thin Solid Films, Vol. 332, pp.124/129, 1998

187. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K. Kostazos

“Modelling of the crush zone of axially loaded thin-walled tubular components

using explicit finite element techniques”

Proc. 31st ISATA Conference on Materials for Energy-Efficient Vehicles,

Düsseldorf, Germany, June 1998, pp. 113/121

188. T. Le Huu, D. Paulmier, M. Horvath and A.G. Mamalis,

“Effect of hydrogen H+ bombardment on friction and wear behavior of diamond

coatings”

Proc. 8th International Conference on Tribology, Nordtrib 98, Ebeltht, Denmark,

June 1998, pp. 853/860

189. A.I. Grabchenko, F. Lierath, A.G. Mamalis, D. Paulmier and M. Horvath,

“Achievements of high-technology and engineering education”

Proc. Interpartner 98 Conference, Alushta, Crimea, Ukraine, September 1998, pp.

14/20 (in Russian).

190. R. Getmanov, G.L. Chavin, N.V. Verezub and A.G. Mamalis,

“Analytical model of damage of glass/polymeric matrix composites during

machining”,

in “High Technology in Mechanical Engineering”, Collected Scientific Articles of

Kh SPU, Kharkov, Ukraine, 1998, pp.71/75 (in Russian).

191. A.I. Grabchenko, M.G. Magazeev and A.G. Mamalis,

“Comparative tests of tool life of diamond cutters dressed by combined method”,

in “High Technology in Mechanical Engineering”,Collected Scientific Articles of

Kh SPU, Kharkov, Ukraine, 1998, pp.82/85 (in Russian).

192. A.G. Mamalis A.A. Getmanov, N.V. Verezub and G.L. Chavin,

“Decide contact skill in cut with blade tools of composite material”,

in “Information Technology,:Science, Technique, Technology, Education, Health”,

in “High Technology in Mechanical Engineering”, Collected Scientific Articles of

Kh SPU, Kharkov, Ukraine, 1998, Vol. 4, No. 6, pp.164/167 (in Russian).

22

193. A.G. Mamalis, M. Horvath, I. Mészáros, D. Paulmier, A.I. Grabchenko, and V.A.

Fedorovich

“Methodological principles of machinability studies of superhard materials”

in “Information Technology, Science, Technique, Technology, Education, Health”,

Collected Scientific Articles of Kh SPU, Kharkov, Ukraine, 1998, Vol. 4, No. 6,

pp.168/173 (in Russian).

194. J.M. Macevitij, A.G. Mamalis, S.F. Lushpenko, E.V. Ostroveich, and N.V.

Kasakova

“Temperature distribution in grinding superhard polycrystals”

in “Information Technology : Science, Technique, Technology, Education, Health”,

Collected Scientific Articles of Kh SPU, Kharkov, Ukraine, 1998, Vol. 4, No. 6,

pp.174/175 (in Russian).

195. A.I. Grabchenko, V.A. Fedorovich, J. Kundrak, A.G. Mamalis and M. Horvath

“Transformation of mechanisms of superhard polycrystals destruction in grinding

process”

Proc. International Computer Science Conference Micro CAD '98: Section F

“Production Engineering Manufacturing Systems”, Miskolc, Hungary, February

1998, pp.27/33

196. A.G. Mamalis, M. Horvath, A.I. Grabchenko and V.A. Fedorovich

“Diamond grinding of superhard materials”

in “Progressive Technique: Technology of Mechanical Engineering, Instrument-

Making, Industry and Welding Production”, Proc. International Scientific

Conference, Kiev, 1998, Vol. 1, pp.264/266

197. A.G. Mamalis, M. Horvath and A.I. Grabchenko

“Peculiarities of diamond grinding process of superhard materials”

in “Progressive Technique: Technology of Mechanical Engineering, Instrument-

Making, Industry and Welding Production”, Proc. International Scientific

Conference, Kiev, 1998, Vol. 1, pp.295/297

198. A.G. Mamalis and G. C. Vosniakos,

“Intelligence in Computer Aided Process Planning”,

Proc. 3rd European Robotics, Intelligent Systems and Control Conference, Athens,

Greece, June 1998; “Advances in Manufacturing”, Ed. S. G. Tzafestas, Springer,

Advanced Manufacturing Series, London, 1999, pp. 13/24

199. T. Le Huu, M. Scmitt, D. Paulmier, A.G. Mamalis and A.I. Grabchenko

“Tribological properties of smooth diamond coatings for cutting tools”

Proc.12th International Conference on Wear of Materials, Atlanta, GA, USA, April

1999;

Wear, Vol. 225/229, pp. 843/847,1999

200. A.I. Grabchenko, M. Horváth, A.G. Mamalis, I. Mészáros, and D. Paulmier

“On the ultraprecision machining of aspherical mirror - surfaces of stainless steels”

Gépgyártástechnologia, Vol. 39, No. 5, pp.13/18, 1999

23

201. A.G. Mamalis, A.I. Grabchenko, V.L. Dobroskok, V.A. Fedorovich and D.

Paulmier,

“Modelling of formation process of diamond wheel working surface during

grinding”,

Proc. International Computer Science Conference MicroCAD '99, Miskolc,

Hungary, February 1999, pp.75/81

202. A.G. Mamalis, M. Horvath, J. Kundrak, I. Mészáros and D. Paulmier,

“Surface integrity during high-precision cutting of superhard steels”,

Proc. 1st International EuSPEN Conference, Bremen, Germany, May 1999;

Eds. McKeown, J. Corbett, M. Bonis, S. Sartori, H. Kunzmann, M. Weck, E.

Brinsksmeier, W. Preuss, O. Riemer, Shaker Verlag, Aachen, 1999, Vol. 2,

pp.483/486

203. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K.Kostazos,

“Simulation of bending of fibreglass composite thin-walled tubular components

using implicit finite element techniques”,

Proc. 6th International Conference on Composites Engineering, ICCE/6, Orlando,

USA, June 1999, pp. 541/542

204. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K.Kostazos and K. Dedes,

“Finite element simulation of the collapse modes of axially dynamically loaded

thin-walled metallic rectangular tubular components”,

Proc. 32nd ISATA Conference on Materials for Energy Efficient Vehicles, Vienna,

Austria, June 1999, pp. 253/259

205. A.G. Mamalis,

“Processing techniques of HTS-metal compositions”,

Invited Lecture, 5th International Summer School on High Temperature

Superconductivity (5th ISSHTS), Eger, Hungary, July 1999; Textbook, Eds.

I.Vajda, A. Szálay, T. Porjesz and J. Bankutti, World Scientific Publishing Co.,

Budapest, 1999, pp.1/33

206. A.G. Mamalis, I. N. Vottea and D.E. Manolakos,

“Finite element modelling of the explosive compaction of powders”,

Proc.5th International Summer School on High Temperature Superconductivity (5th

ISSHTS), Eger, Hungary, July 1999, pp.1/13

207. A. Szálay, A.G. Mamalis, B. Raveau, G. Desgardin, I. Vajda, N. Göbl, T. Porjesz,

L. Chubraeva and I. Kotsis

“Dynamic compaction for fabrication of HTS ceramic components”,

Proc. 4th EUCAS Conference on Applied Superconductivity, Barcelona, Spain,

September 1999,Institut of Physics Conference Series No167, ICP Publishing Ltd,

Vol. 1, pp.303/306, 2000

24

208. A.G. Mamalis, A. Szálay, D.E. Manolakos and N.M. Vaxevanidis,

“Fabrication of Ni/Ti bimetallic rods by explosive powder compaction and

extrusion”,

Proc. 6th International Conference on Technology of Plasticity (ICTP), Nürnberg,

Germany, September 1999; “Advanced Technology of Plasticity”, Ed. M. Geiger,

Springer Verlag, Vol. 2, pp. 1339/1344, 1999

209. A.G. Mamalis and N.M. Vaxevanidis

“Environmental and ecological aspects of metal forming”

Proc. ICEM’99, Nürnberg, Germany, September 1999, pp. 151/161

210. L. Varga, A.G. Mamalis, I. Mészáros and L. Bartha,

“Sintering of Alumina valve-balls and their ultraprecision working with synthetic

diamond grains”,

Proc. International Conference on Materials, Piestany, Slovakia Republic,

September 1999, pp. 307/316

211. A.G. Mamalis, G.L. Petrosian and D.E. Manolakos,

“Open-die forging of sintered cylindrical billets: An analytical approach”,



“The effect of porosity and microdefects on plastically deformed porous materials”,


213. M. Enisz, I. Kotsis, A.G. Mamalis, L. Csetenyi, and D. Oravetz

“Bulk Eu-Ba-Cu-O superconductors produced by melt-powder-melt-growth

(MPMG) technique”,

Proc. 4th Multinational Congress on Electron Microscopy, Veszprem, Hungary,

September 1999, pp. 311/312

214. N.V. Verezub, A.M. Fedorov, and A.G. Mamalis

“Optimization of precision machining processes of polymer optical products”

Kharkov, Information Technologies, Vol. 7, pp. 41/46, 1999 (in Russian)

215. A.M. Fedorov, N.V. Verezub, V.D. Havin, S.N. Lavrynenko and A.G. Mamalis

“Calculate method of rigidity and toughness for axial mini-dimensional cutting

tools”

Kharkov, Cutting and Tools, Vol. 54, pp. 234/238, 1999 (in Russian)

216. V.A. Fedorovich, and A.G. Mamalis,

“Modelling of controlled grinding of superhard material”

Kharkov, Cutting and Tools, Vol. 55, pp. 214/219, 1999 (in Russian)

25

217. A.I. Grabchenko, M. Horvath, A.G. Mamalis, I. Mészaros and D. Paulmier

“Ultraprecision machining of mirror surfaces”

Proc. 6th International Symposium of Machining and Cutting Tools, OSIN’99,

Krakow, Poland, December 1999, pp. 189/206

218. A.G. Mamalis, M. Horváth and A.I. Grabchenko,

“Diamond grinding of superhard materials”,


219. A.I. Grabchenko, N. V. Verezub, S.N. Lavrynenko, M. Horvath, and A.G. Mamalis,

“Precision cutting of optical polymer components for bioengineering applications”,



“Limit design of porous sintered metal powder machine elements”,


221. A.G. Mamalis,

“Technological aspects of high-Tc superconductors”,


222. A.G. Mamalis, B. Hidasi, Z. Dudàs and A.S. Branis,

“On the lapping mechanism of sintered Al2O3 ceramic surfaces using synthetic diamonds”,

Material and Manufacturing Processes, Vol. 15, pp. 503/520, 2000


“The bending of fibre-reinforced composite thin-walled tubular components:

Numerical modelling”

International Journal of Crashworthiness, Vol.5, pp. 193/205, 2000


“Axial collapse of hybrid square sandwich composite tubular components with

corrugated cores: Experimental”


225. B. Hidasi, Z. Dudas and A.G. Mamalis,

“Plastic deformation of Al2O3 ceramic materials using ultraprecision machining” Journal of Material Testers, Nr. 3, pp. 71/76, 2000 (in Hungarian)

226. A.G. Mamalis, J. Kundrak, M. Horvath and D. Paulmier

“Determination of wear and tool life in cutting”

Proc. International Computer Science Conference MicroCAD 2000, Miskolc,

Hungary, February 2000, pp. 67/72

26

227. L. Torre, J.M. Kenny and A.G. Mamalis

"Energy absorbing behaviour of composite sandwich panels for civil transportation"

in “Society for the Advancement of Material and Process Engineering”,

Proc. International SAMPE Conference, Paris, France, April 2000, pp. 457/468

228. A.I. Grabchenko, F. Lierath, A.G. Mamalis and D. Paulmier

“Concept of high technology in the machine building industry and education of

specialists”

Proc. International Conference on the Creative Peculiarities in the System of

Continuous Professional Education, Eds. S.D. Sysoeva and O.G. Romanovski,

Kharkov, Ukraine, May 2000, pp. 159/164

229. N.V. Verezub, A.M Fedorov, C.C. Zhubati, C.B. Bondari and A.G. Mamalis

“Expert system MINOS for selection of optimum parameters for precision

machining of optical polymer parts”

Kharkov, Cutting and Cutting Tools in Manufacturing Systems, Vol.56, pp. 15/19,

2000 (in Russian).

230. A.G. Mamalis, J. Prohaszka and I. Mészaros

“The effect of the anisotropy of the material on the surface topography in case of

ultraprecision machining”

Proc. 1st EuSPEN Topical Conference on Fabrication and Metrology in

Nanotechnology, Copenhagen, Denmark, May 2000, Vol.2, pp. 440/446

231. A.G. Mamalis “Net-shape manufacturing of high-Tc superconductors at high strain rates”


Superconductivity (6th ISSHTS), Eger, Hungary, July 2000;

Textbook, Eds. I. Vajda, A. Szàlay, T. Porjesz and J. Bankutti, World Scientific

Publishing Budapest, 2000;

Eds J. Vajda and L. Farkas, The Supertech Consortium Budapest Hungary, 2001,

pp. 85/118

232. A.G. Mamalis, I.N. Vottea and D.E. Manolakos

“Simulation of the explosive compaction of superconducting powders using

explicit finite element techniques”

Proc. 6th International Summer School on High Temperature Superconductivity

(Workshop), Eger, Hungary, July 2000

233. A.G. Mamalis, I. Mészaros and D. Paulmier

“The effect of the cutting edge roughness on the surface roughness during

ultraprecision machining of hardened steels”

Proc. 16th IMEKO World Congress, IMEKO 2000, Vienna, Austria, September

2000, pp. 367/371

234. A.G. Mamalis, D.E. Manolakos and M.B. Ioannidis

“Bending fatigue of fibre-reinforced epoxy composites”

Proc. ISATA 2000 Conference, Dublin, Ireland, September 2000, pp. 209/215

27

235. A.G. Mamalis

“Manufactuirng of bulk high-Tc superconductors”

Journal of Inorganic Materials, Vol.2, pp. 623/633, 2000

236. A.G. Mamalis, I. Vottea and D.E. Manolakos

“Numerical simulation of explosively compacted superconducting powders”

Proc. 6th International Conference on Materials and Mechanism of

Superconductivity and High Temperature Superconductors, Houston, Texas, USA,

February 2000;

Physica C, Vol.341-348, pp. 2433/2434, 2000

237. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and G. Hassiotis

“Finite element simulation of the axial collapse of thin-wall square frusta”

Proc. International Conference ICrash 2000, London, UK, September 2000,

pp.483/492;

International Journal of Crashworthiness, Vol. 6, pp.155/164, 2001

238. A.G. Mamalis

“Preface”

Proc. 1st Japaneese/Greek Joint Workshop Superconductivity and Magnetic

Materials JGWSM `99, Athens, Greece, May 1999;

Journal of Materials Processing Technology, Vol. 108, pp.125, 2001

239. A.G. Mamalis,

“Near net-shape manufacturing of bulk ceramic superconductors for applications in

electricity and transformation”,

Proc.1st Japanese/Greek Joint Workshop on Superconductivity and Magnetic

Materials JGWSM '99, Athens, Greece, May 1999;


240. A.G. Mamalis, I. N. Vottea and D.E. Manolakos,

“On the modelling of the compaction mechanism of shock compacted powders”,

Proc.1st Japanese/Greek Joint Workshop on Superconductivity and Magnetic

Materials (JGWSM '99), Athens, Greece, May 1999;


241. A. O. Tonoyan, S.P. Davtan, S.A. Martirosian and A.G. Mamalis,

“High-temperature superconducting polymer-ceramic compositions”,

Proc. 1st Japanese/Greek Joint Workshop on Superconductivity and Magnetic

Materials JGWSM '99, Athens, Greece, May 1999;


28

242. A.G. Mamalis, I. Vottea, D.E. Manolakos, A. Szalay and G. Desgardin

“On the numerical simulation of shock compacted metal sheathed high-Tc

superconducting billets”

Proc. EXPLOMET 2000 Conference, Albuquerque, New Mexico, USA, June 2000;

in “Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate

Phenomena, Eds K.P. Staudhammer, L.E. Murr and M.A. Meyers, Elsevier, New

York, 2001, pp. 289/295

243. A.G. Mamalis, M. Horvath, A.S. Branis and D.E. Manolakos,

“Finite element simulation of chip formation in orthogonal metal cutting”,


244. A.G. Mamalis, A.I. Grabchenko, M. Horvath, I. Mészáros and D. Paulmier,

“Ultraprecision metal removal processing of mirror-surfaces”,


245. A.I. Grabchenko, N.V. Verezub, S.N. Lavrynenko, A.M. Ferdorov, A.A. Getmanov,

M. Horvath and A.G. Mamalis

“Precision machining of optical products made from polymeric materials”,


2001

246. A.G. Mamalis, S.G. Ovhinnikov, M.I Petrov, D.A. Balaev, K.A. Shaihutdinov, D.M.

Gohfeld, S.A. Kharlamova and I.N. Vottea “Composite materials on high-Tc superconductors and BaPbO3, Ag basis”,

Proc. 3rd International Conference on New Theories, Discoveries and Applications

of Superconductors and Related Materials New3 SC-3, Honolulu, Hawaii, USA,

January 2001;

Physica C, Vol. 364-365, pp.174/177, 2001


“Axial crushing of hybrid square sandwitch composite vehicle hollow bodyshells

with reinforced core: Experimental”

International Journal of Crashworhiness, Vol.6, pp.363/375, 2001

248. A.G. Mamalis, A.I. Grabchenko, V.A. Fedorovich, S.A. Grinko, D. Paulmier and M.

Horvath

“Development of an expert system of diamond grinding of superhard polycrystalline

materials under consideration of grinding wheel relief”

International Journal of Advanced Manufacturing Technology, Vol.17, pp.498/507,

2001

249. A.G. Mamalis, M.I. Petrov, D.A. Balaev, K.A. Shajhutdinov, D.M. Gohfeld, S.V.

Militsyn, S.G. Ovchinnikov, V.I. Kirko and I.N. Vottea

“A dc superconducting fault current limiter using die-pressed YBa2Cu307 ceramic” Superconductor Science and Technology, Vol.14, pp.413/416, 2001

29

250. S.G. Ovchinnikov, V.I. Kirko, A.G. Mamalis, M.I. Retrov, V.V. Ivanov, D.A.

Balaev, D.M. Gohfeld, S.A. Kharlamova, S.V. Militsyn and K.A. Shaihutdinov

“A new concept for a current switch based on a high-temperature superconductor”

Technical Physics, Vol. 46, No 10, pp. 1299/1302, 2001

251. K.E. Puttick, A.G. Mamalis and S. N. Lavrynenko

“Registration and modelling of polymers stress propagation in controlled directional

fracture processing by microcutting and indentation”

Proc. 2nd International EuSPEN Conference, Torino, Italy, May 2001, pp.664/666

252. J. Nyiró, A.G. Mamalis, J. Prohàszka and I. Mészaros

“Analysis of ultraprecision turned mirror surfaces”

Proc. 2nd International EuSPEN Conference, Torino, Italy, May 2001, pp. 718/721

253. A.G. Mamalis

“Fabrication of high-Tc ceramic superconductors”

in “Idee-Vision-Innovation”, Eds F. Vollertsen and M. Kleiner, Meissenbach

Verlag, Bamberg, Germany, 2001, pp.349/358

254. A.G. Mamalis

“New trends in nanotechnology”

Proc. Symposium on the Occasion of the 50th Anniversary of the Department of

Manufacturing Engineering of the Budapest University of Technology and

Economics, Budapest, Hungary, May 2001, pp.41/53

255. A.G. Mamalis

“Trends and developments in bulk high-Tc superconductivity”

Proc. 2nd Japanese/Greek Joint Workshop on Superconductivity and Magnetic

Materials, Oita, Japan, May 2001;

in “Superconductivity and Magnetic Materials”, Eds. M. Enokizono and A.G.

Mamalis, JAESM Studies in Applied Electromagnetics and Mechanics, Vol. 12, pp.

116/126, 2001


“Numerical simulation of the explosive compaction/cladding of grooved YBCO

metal/ceramic plates”

Proc. 2nd Japanese/ Greek Joint Workshop on Superconductivity and Magnetic

Materials, Oita, May 2001;

in “Superconductivity and Magnetic Materials”, Eds. M. Enokizono and A.G.

Mamalis, JAESM Studies in Applied Electromagnetics and Mechanics, Vol. 12, pp.

132/138, 2001

257. A.G. Mamalis

“Trends and developments in manufacturing of high-Tc superconductors”

Proc. International Scientific Seminar High-Tech 2001, Krasnoyarsk, Siberia, June

2001, Vol.1, pp. 1/16

30

258. S.G. Ovhinnikov, B.A. Belyaev, V. I. Kirko, M.I. Petrov and A.G. Mamalis.

“Possibility of applications of high-temperature superconductors in electronics”


2001, Vol.1, pp.61/63

259. S.G. Ovhinnikov, A.G. Mamalis, V. I. Kirko, M.I. Petrov, D. A. Balaev, K.A.

Shaihutdinov, D.M. Gohfeld, S.V Militsyn and I.N Vottea

“Development of new bulk materials on the high temperature superconductors bases

as active elements for fault current limiters”


2001, Vol.1, pp.245/251

260. A.G. Mamalis

“New trends and developments in advanced manufacturing”

Proc. International Scientific Conference “Interpartrer 2001’’ on High

Technologies: Development of Personnel Provision, Alushta, Crimea, Ukraine,

September 2001, pp.138/150

261. A.G. Mamalis

“Manufacturing of high-Tc superconductivity components by explosive

compaction”

Invited Lecture, 7th International Summer School on High Temparature

Superconductivity (7th ISSHTS), Balaton, Hungary, September 2001;

Textbook of Advanced Studies on Superconducting Engineering, ASSE 2001, Eds.

I. Vajda and L. Farkas, Budapest, pp1/25


“Axial crushing of hybrid square sandwich composite vehicle hollow bodyshells”

Proc., Automotive and Transportation Techology Congress and Exhibition, ATTCE

2001, Barcelona, Spain, October 2001, Vol. 4, pp. 133/138

263. I. Kotsis, M. Enisz, A. Szalay, I. Vajda and A.G. Mamalis

“Effect of explosive compaction on microstructure and physical properties of

ceramic superconducting materials produced by different techniques”

Proc. Hungarian Conference and Exhibition on Materials Science, Testing and

Informatics, Balatonfüred, Hungary, October 2001, pp.164/169;

Materials Science Forum, Vol. 414/415, pp.121/126, 2003

264. A.G. Mamalis

“Crashworthy behaviour of composite thin-walled structural components”

Proc. International Conference on Science and Technology of Composite materials,

COMAT 2001, Mar del Plata, Argentina, December 2001, pp.81/86

265. A.G. Mamalis, J. Kundrak and K. Gyani

“The significance of continuous dressing in precision grinding of hard and brittle

materials”

Materials and Manufacturing Processes, Vol.16, pp.341/351, 2001

31

266. A.G. Mamalis

“Net-shape manufacturing of high-Tc superconductors for applications in electricity

and transportation”

Proc. 10th International Symposium of Applied Electromagnetics and Mechanics,

ISEM 2001, Tokyo, Japan, May 2001;

International Journal of Applied Electromagnetics and Mechanics, Vol. 14, pp.

65/74, 2001/2002

267. V.A. Gavrichkov, F.V. Kuzman, S.G. Ovchinnikov and A.G. Mamalis

“Effects of magnetism on the electronic structure and pairing mechanism in oxide

superconductors”

Proc. 10th International Symposium of Applied Electromagnetics and Mechanics

ISEM 2001, Tokyo, Japan, May 2001;


343/348, 2001/2002

268. E. Koutroulis, A.G. Kladas and A.G. Mamalis

“Advanced permanent magnet machine design and construction for wind power

generation and traction applications”

Proc. 10th Int. Symposium of Applied Electromagnetics and Mechanics, ISEM

2001, Tokyo Japan, May 2001;


285/290, 2001/2002

269. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K.Kostazos and M. Robinson,

“On the static axial collapse of square composite rail vehicle hollow bodyshells”

in “Experimental Techniques and Design in Composite Materials 4”, Ed. M. Found,

Swets and Zeitlinger, Lisse, Holland, 2002, pp. 87/92

270. A.G. Mamalis, A.S. Branis and D.E. Manolakos

“Modelling of precision hard cutting using implicit finite element techniques”

Journal of Materials Processing Technology, Vol.123, pp. 464/475, 2002

271. A.G. Mamalis

“Consolidation mechanisms of shock compacted metal and ceramic powders”

in “Development of High-Temperature Superconducting Electrical Alternators

Combining Rotating and Levitating Principles”, Ed. L. Chubraeva, Russian

Academy of Sciences, Division for Basic Researches in Elecric Power Engineering,

Saint Petersburg, Russia, 2002, pp. 7/26

272. S. Marinel, A. Szalay, B. Tribotté, C. Harrois, F. Delarme, A.G. Mamalis and G.

Degardin

“Characterasation of YBCO superconductive components processed by explosive

compaction”

in “Development of High-Temperature Superconducting Alternators Combining

Rotating and Levitating Principles”, Ed. L. Chubraeva, Russian Academy of

Sciences, Division for Basic Researches in Elecric Power Engineering, Saint

Petersburg, Russia, 2002, pp. 46/51

32


“On the dry machining of steel surfaces using superhard tools”


2002

274. M. Horvàth, J. Kundrak, A.G. Mamalis and K. Gyani

“On the precision grinding of advanced ceramics”

International Journal of Advanced Manufacturing Technology, Vol.20,

pp.255/258, 2002

275. A.G. Mamalis, M.I. Petrov, S.G. Ovchinnikov, V.I. Kirko, D.A. Balaev, K.A.

Shaihutdinov, D.M. Gohfeld, S.A. Kharlamova, S.V. Militsiyn, V.V. Ivanov and

I.N. Vottea.

“A novel energy efficient SFCL with a silver-free contact switchgear for application

in electricity and transportation”

IEEE Transactions on Applied Superconductivity, Vol.12, pp.1770/1775, 2002

276. A.G. Mamalis, I.N. Vottea and D.E. Manolakos "Fabrication of metal/sheated high-Tc superconducting composites by explosive compaction/cladding: Numerical simulation"

Materials Science and Engineering B, Vol. 90, pp.254/260, 2002

277. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, D.P. Papapostolou, P.K. Kostazos

and D.G. Konstantinidis

“On the compression of hybrid sandwich composite panels reinforced with internal

tube inserts: Experimental”

Composite Structures, Vol.56, pp. 191/199, 2002

278. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and D.P.

Papapostolou

“Axial collapse of hybrid square sandwich composite tubular components with

corrugated core: Numerical modelling”

Composite Structures, Vol. 58, pp.571/582, 2002

279. A.G. Mamalis, J. Kundrak and M. Horváth

“Wear and tool-life of CBN cutting tools”

International Journal of Advanced Manufacturing Technology, Vol.20,

pp.475/479, 2002

280. A.G. Mamalis, J. Kundràk, K. Gyàni and A. Markopoulos

“Finite element modelling of the temperature fields developed during grinding”

Proc. International Scientific Conference Micro CAD 2002, Miskolc, Hungary,

March 2002, pp.141/148;

GEP, Vol.52, No 2-3, pp.29/32, 2002

33

281. S.N. Lavrynenko, A.G. Mamalis, A.I. Grabchenko, and N.V. Verezub

“Kinematic interaction between diamond cutting wedge and amorphous polymer

materials in dynamics of precision machining”

Proc. 3rd International EuSPEN Conference Eindhoven, Holland, May 2002, Vol.1,

pp.281/284

282. A.G. Mamalis

“New trends and developments in advanced manufacturing”

Proc. International ISM Conference on Questions of Mechanics and Physics of

Cutting Processes and Processes of Cold Plastic Deformation, Kiev, Ukraine, May

2002, pp.500/509

283. J. Prohàszka, J. Dobrànszky, M. Horvàth and A.G. Mamalis

“Effect of crystal orientation on surface integrity”

Proc. 6th International Conference ASMT`02, Udine, Italy, June 2002;

in “Advanced Manufacturing Systems and Techology”, Ed. E. Kulianic, CISM

Courses and Lectures No 437, Springer, 2002, pp. 801/808

284. S. N. Lavrynenko, V. I. Pyzkov, A.G Mamalis and V.V Lukjanchenko

“Problems of high – quality components machining from titanium alloys for medical

applications”

Cutting and Tools, Kharkov, Ukraine, Vol. 61, pp 120/122, 2002 (in Russian)

285. A.G. Mamalis, A.I Grabchenko, S.N. Lavrynenko and M.G. Magaseev

“Besonderheiten der Formierung von dem Oberflächenschicht bei der Bearbeidung

von optischen Polymersmaterialien mit der hohen Qualität (Features of surface layer

forming for high-quality polymer optical ccomponents) ”

Cutting and Tools, Kharkov, Ukraine, Vol.63, pp.106/109, 2002 (in Russian)

286. A.G. Mamalis

“Fabrication of high-temperature ceramic superconductors at high strain rates”

Proc. International Conference on Superhard Tool Materials in the Turn of the

Centuries: Production, Properties, Applications, Kiev, Ukraine, July 2001;

International Journal of Superhard Materials, No 5, pp. 3/16, 2002

287. A.G. Mamalis, J. Kundràk, K. Gyani and A. Markopoulos

“On the simulation of surface grinding using implict finite element techniques”

Proc. 4th International Scientific Conference on Development of Metal Cutting

(OMC 2002), Kosice, Slovakia, May 2002, pp.46/49

288. A.G. Mamalis

“Ultraprecision engineering and nanotechnology: Recent trends and applications”

Proc. Staver Memorial Meeting on High Energy Processes and Nanostructure,

Krasnoyarsk, Russia, April 2002, Vol. 1, pp.1/15

34

289. A.G. Mamalis

“The modern tendencies of high-technological development in machine building”

Proc. 10th International Scientific and Practical Conference on Information

Technologies: Science, Engineering, Technology, Education, Health “Micro CAD

2002”, Kharkov, Ukraine, May 2002, p.8 (in Russian)

290. A.I. Grabchenko, A.G. Mamalis, S. N. Lavrynenko and M.G. Magaseev

“Generation of high-quality surface layers from polymers by single-point diamond

milling”

Proc. 10th International Scientific and Practical Conference on Information

Technologies: Science, Engineering, Technology, Education, Health “Micro CAD

2002”, Kh“Micro CAD 2002”, Kharkov, Ukraine, May 2002, p. 95/96 (in Russian)

291. A.G. Mamalis

“Manufacturing of high-Tc superconducting components at high strain rates:

Experimental and numerical”


Superconductivity (8th ISS HTS), Budapest, Hungary, September 2002;

Textbook of Advanced Studies on Superconductivity Engineering ASSE 2002,

Eds. I. Vajda and L. Farkas, Budapest, pp /__

292. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and S.N. Kastanias

“Numerical modelling of the axial plastic collapse of externally grooved steel thin-

walled tubes”

Proc. ICrash Conference Melbourne, Australia, February 2002;


293. A.G. Mamalis, I.N. Vottea, D.E. Manolakos, A. Szálay and A. Kladas

“Numerical simulation of explosive consolidation of superconducting bulk

componets”

Proc. 4th International Conference on New Theories, Discoveries and Applications

of Superconductors and Related Materials (New 3SC-4), San Diego, California,

USA, January 2003;

International Journal of Modern Physics B, Vol. 17, pp. 3563/3567, 2003

294. A.G. Mamalis, J. Kundrak, D.E. Manolakos, A. Markopoulos and G. Christoforou

“Numerical analysis of surface grinding: Comparison between 2D and 3D

modelling”

Proc. International Scientific Conference “MicroCAD 2003”, Miskolc, Hungary,

March 2003, pp.155/160

295. S.N. Lavrynenko, Y.A. Siziy, O.V. Titarenko and A.G. Mamalis

“Mathematical modeling of process of propagation of thermal fields in

ultraprecission polymer machining”

Vestnik NTU “KhPI”, Kharkov, Ukraine, Vol.1, Nr.9, pp.13/18, 2003 (in Russian)

35

296. Y.A Siziy, S.N. Lavrynenko, O.V. Titarenko and A.G. Mamalis

“Analysis of mode of dynamic propagation of temperature fields by single-point

machining of polymers”

Cutting and Tools, Kharkov, Ukraine, Vol.65, pp.137/142, 2003 (in Russian)

297. O.A. Rozenberg, A.A. Shulzhenko, A.G. Mamalis, V.G. Gargin and

S.V. Sokhan

“Manufacture of tips for diamond burnishing and dressing probes for abrasive

wheels with a diamond composition thermal material AKTM”

Journal of Materials Science, Vol.38, pp.789/794, 2003

298. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and C. Chirwa

“Static and dynamic axial collapse of fiberglass composite thin-walled tubes: Finite

element modeling of the crush zone”

International Journal of Crashworthines, Vol. 8, pp.247/254, 2003


“Crushing of hybrid square sandwich composite vehicle hollow bodyshells with

reinforced core subjected to axial loading: Numerical simulation”

Composite Structures, Vol.61, pp.175/186, 2003

300. A.G. Mamalis, J. Kundràk, D.E. Manolakos, K. Gyàni and A. Markopoulos

“Thermal modelling of surface grinding using implict finite element techniques”


929/934, 2003

301. S.N. Lavrynenko, Y.A. Siziy, O.V. Titarenko and A.G. Mamalis

“Statement of task for modeling of thermal process dynamics in ultraprecission

cutting of polymers”

Proc. 11th International Conference on Information Technology MicroCAD 2003,

Kharkov, Ukraine, May 2003, pp.168

302. A.G. Mamalis and S.N. Lavrynenko

“Modelling of cutting tool and work material interaction process in ultraprecission

single-point diamond machining”

Proc. EuSPEN International Topical Conference on Precission Engineering, Micro-

Technology, Measurement Techniques and Equipment, Aachen, Germany, May

2003, pp. 265/268

303. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and C. Dimitriou

“Finite element simulation of the axial collapse of metallic thin-walled tubes with

octagonal cross-section”

Thin-Walled Structures, Vol.41, pp.891/900, 2003

36

304. A.G. Mamalis

“Manufacturing of high-Tc superconducting components at high strain rates :

Experimental and numerical”


Superconductivity (9th ISS HTS), Budapest, Hungary, July 2003, Eds. I. Vajda

and L. Farkas, Budapest, pp.1/25


“On the surface integrity of precision ground steel cylindrical parts”

Materials and Manufacturing Processes, Vol. 18, pp.835/845, 2003

306. A.G. Mamalis

“Powder processing”

International Journal of Production Engineering and Computers, Vol. 5, Nr. 6,

pp. 15/31, 2003

307. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, A. Markopoulos and

I.N. Vottea

“Simulation of advanced manufacturing of solids and porous materials”

International Journal for Manufacturing Science and Production, Vol. 5, pp.

111/130, 2003

308. A.G. Mamalis, J. Kundràk, D.E. Manolakos, K. Gyani, A. Markopoulos and M.

Horváth

“Effect of the workpiece material on the heat affected zones during grinding: A

numerical simulation”


761/767, 2003

309. A.G. Mamalis, J. Kundrák and A. Markopoulos

“Numerical simulation for the determination of the temperature fields and the heat

affected zones in grinding”

Production Systems and Information Engineering, Miskolc, Hungary, Vol. 1,

pp3/16, 2003

310. A.G. Mamalis

“Shock wave compaction of advanced materials: Physical, analytical and numerical

modeling”

Proc.13th International Conference “Interpartner 2003” on High Technologies in

Mechanical Engineering, Aluschta, Crimea, Ukraine, September 2003

311. S.N. Lavrynenko, V.G. Senchyshyn and A.G. Mamalis

“Manufacturing of polymeric components for photonic and bioengineering

applications”

Proc. 13th International Conference “Interpartner 2003” on High Technologies in

Mechanical Engineering, Aluschta, Crimea, Ukraine, September 2003, p.283

37

312. A.G. Mamalis, J. Kundrák, K. Gyani and A. Markopoulos

“Economical and environmental effects on machining hardened bores and the

connecting surfaces”

Proc. 2nd International Workshop on Ecology and Economy in Manufacturing

ICEM 2003, Miskolc. Hungary, October 2003, pp. 10/18

313. A.G. Mamalis

“Numerical and physical modelling of crashworthy composite thin-wall structures”

Proc. 2nd International Conference on Science and Technology of Composite

Materials COMAT 2003, Merida, Yukatan, Mexico, November 2003, pp. 9/16

314. A.G. Mamalis, I.N. Vottea, D.E. Manolakos, A. Szalay and F.S.D. Marquis

“Explosive compaction/cladding of YBCO discs: A numerical approach”

Proc. Symposium on Powder Materials: Current Research and Industrial Practices,

Chicago, Illinois, USA, November 2003; TMS Publication, 2003,

Ed. F.D.S. Marquis, pp. 191/197

315. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos, A. Goulielmos

and G. Demosthenous

“Finite element simulation of internally grooved thin-wall PVC tubes subjected to

axial collapse”

Proc. ICrash Conference, Melbourne, Australia, February 2002;

International Journal of Crashworthiness, Vol.9, pp.433/441, 2004


“Explosive compaction/cladding of metal sheathed/superconducting grooved

plates: FE modelling and validation”

Proc. 7th International Conference on Materials and Mechanisms of

Superconductors, Rio de Janeiro, Brasil, May 2003;

Physica C, Vol.408/410, pp.881/883, 2004

317. A. Giannoglou, A. Kladas, J. Tegopoulos, A. Koumoutsos, D. E. Manolakos and

A.G. Mamalis

“Electromagnetic forming: A coupled numerical electromagnetic-mechanical-

electrical approach compared to measurements”

Proc.11th International Symposium on Electromagnetic Fields in Electrical

Engineering ISFE 2003, Maribor, Slovenia, September 2003, pp237/242

International Journal for Compulation and Mathematics in Electrical and Electronic

Engineering (COMPEL), Vol.23, pp.789/799, 2004


“Application of explicit FE techniques on the explosive compaction/cladding of

high-temperature superconductors”

Proc. 1st International Symposium on Explosion, Shock Wave and Hypervelocity

Phenomena, Kumamoto, Japan, March 2004, in “Explosion Shock wave and

Hyporelocity Phenomena in Materials”, Eds. S. Itoh, K.

Hokamoto and M. Fujita, Trans Tech Publications, 2004, pp.101/106

38

319. A.G. Mamalis, D.E. Manolakos, A.G. Kladas and A.K. Koumoutsos

“Electromagnetic forming and powder processing: Trends and developments”

Applied Mechanics Reviews, Vol. 57, pp. 299/324, 2004

320. A. G. Mamalis, L.O.G. Vogtländer and A. Markopoulos

“Nanotechnology and nanostructured materials: Trends in carbon nanotubes”

Precision Engineering, Vol. 28, pp.16/30, 2004


“Elecrtomagnetic tooling for metal forming and powder compaction: Numerical

simulation”

1st International Conference on High-Speed-Forming (ICHSF), Dortmund,

Germany, April 2004, pp.143/154

322. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and D.P. Papapostolou

“Crashworthy characteristics of axially statically compressed thin-walled square

CFRP composite tubes: Experimental”


323. A.G. Mamalis, A.I. Grabchenko, M.G. Magaseev, N.V. Krukova, J. Prohászka and

N. M. Vaxevanidis

“Two-staged electro-discharge machining fabricating superhard cutting tools”


324. J. Kundrák, A.G. Mamalis and A. Markopoulos

“Finishing of hardened bore-holes: Grinding or hard cutting?”

Materials and Manufacturing Processes, Vol.19, pp. 979/993, 2004

325. J. Prohàszka, J. Dobrànszky, J. Nyiro, M. Horvàth and A. G. Mamalis

“Modifications of surface integrity during the cutting of copper”

Materials and Manufacturing Processes, Vol. 19, pp.1025/1039, 2004

326. A.G. Mamalis, J. Kundrák, D.E. Manolakos, A. Markopoulos and K.Tsimpidakis

“The effect of the heat source profile in the thermal modeling of surface grinding”

Prof. International Computer Science Conference microCAD 2004, Miskolc,

Hungary, March 2004, pp. 133/139,

GEP, Vol.34, No 1, pp.26/39, 2004

327. A.G. Mamalis, J. Kundrak, D.E. Manolakos, A. Markopoulos and S. Georgiopoulos

“Development of artificial neural networks models for the simulation of the grinding

process”

Proc. 12th International Scientific and Practical Conference “Micro CAD 2004”,

“Research and Education”, Kharkov, Ukraine, May 2004, pp. 137/143

39

328. O.A. Rosenberg, V.V. Voznyi, S.V. Sokhan, A.G. Mamalis and S.N. Lavrynenko

“Manufacturing of high-quality endoprostheses for total hip - joint replacement:

Problems and solutions”

Proc. 4th EuSPEN International Conference, Glasgow, Scotland, May 2004,

pp.195/196


“On the electromagnetic sheet metal forming: numerical simulation”

Proc. 8th International Conference on Numerical Methods and Industrial Forming

Processes (NUMIFORM), Columbus, Ohio, USA, June 2004, pp. 778/783

330. A.G. Mamalis

“Dynamic compaction of metal/superconductive composites”

Proc. 5th International Conference on New Theories, Discoveries and Applications

of Superconductors and Related Materials (New3SC-5), Chongking, China, June

2004, pp. 1/4

331. A.G. Mamalis, J. Kundràk and M. Horvàth

“On a novel tool life relation for precision cutting tools”

Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol.

127, pp.328/332, 2005


“On the technological parameters of electromagnetic forming”

Proc. International Conference on Computing and Solutions in Manfacturing

Engineering, CoSME ’04, Brasov, Romania, September 2004, pp. 553/562

333. A.G. Mamalis

“Preface”

Proc. 3rd Japanese/Mediterranean Joint Workshop on Superconductivity and

Magnetic Materials JAPMED`03, Athens, Greece, May 2003;

Journal of Materials Processing Technology, Vol.161, p. xi, 2005

334. A.G. Mamalis

“Advanced manufacturing engineering”




335. A.G. Mamalis, I.N. Vottea, D.E. Manolakos, A.Szálay and F. Marquis

“Exposive compaction/cladding of YBCO discs: A numerical approach”


Magnetic Materials JAPMED `03, Athens, Greece, May 2003;


40

336. A.G. Mamalis, D.M. Gokhfeld, S.V. Militsyn, M.I. Petrov, D.A. Balaev, K.A.

Shaihutdinov, S.V. Ovhinnikov, V.I. Kirko and I.N. Vottea

“Switch-on and switch-off tests of inductive high-Tc superconductor based fault

current limiter in the short circuit regime”




337. F.S.D. Marquis, A. Mahajan and A.G. Mamalis

“Shock synthesis and densification of tungsten based heavy alloys”




338. A. G. Mamalis, D.E. Manolakos, A. G. Kladas and A. K. Koumoutsos

“Physical principles of electromagnetic forming process: A constitutive finite

element model”




339. A.G. Mamalis

“Modelling of crashworthy aeronautical composite structural members”

Proc. Workshop in Passive Safety on Road, Rail and Aerospace Transportation

Modes, IST, Lisbon, Portugal, February 2005, APSN Publications, pp. 1/4

340. A.G. Mamalis

“Advanced manufacturing of advanced materials”

Proc. NATO Advanced Research Workshop on Innovative Superhard Materials and

Sustainable Coatings, Kiev, Ukraine, May 2004;

NATO Science Series Book, Kluver Publisher, 2005, pp. 63/80


“Numerical simulation of thin-walled metallic circular frusta subjected to axial

loading”

Proc. ICrash 2004, International Crashworthiness Conference, San Francisco, USA,

July 2004;


342. A.G. Mamalis, J. Kundràk, D.E. Manolakos and A. Markopoulos

“Finite element modelling of hard cutting”

Proc. International Scientific Conference “MicroCAD 2005”, Miskolc,

Hungary, March 2005, pp. 113/118

41

343. A.Γ. Μάμαλης, Δ.Ε. Μανωλάκος και Α.Βορτσέλας

‘‘Σύγχρονες μέθοδοι κατεργασιών λίαν υψηλής ακριβείας στην κατασκευή

σφαιρικών μηριαίων κεφαλών στην αρθροπλαστική ισχύου’’

Πρακτικά 1ου Πανελληνίου Συνεδρίου Μηχανολόγων-Ηλεκτρολόγων, Αθήνα,

Μάρτιος 2005, σελ.

344. S.N. Lavrynenko and A.G. Mamalis

“Complex quality control algorithm for production of ultraprecision photonic and

bioengineering articles from polymers”

Proc. 5th EuSPEN International Conference, Montpellier, France, May 2005, S5P23

345. A.G. Mamalis

“Modern aspects of advanced manufacturing”

Plenary Lecture,


“Research and Education”, Kharkov, Ukraine, May 2005


“Criterion determination of confluent chips quasisteady formation in microcutting

for finite element modeling”


“Research and Education”, Kharkov, Ukraine, May 2005, pp.157/162 (in Russian);

National Technology University “Kharkiv Polytechnic Institute” Publication, Vol.

24, pp.122/127, 2005

347. N.V. Novikov, O.A. Rozenberg, A.G.Mamalis and S.V. Sokhan

“Finish diamond machining of ceramic femoral heads”

International Journal of Advanced Manufacturing Technology, Vol.25, pp. 244/247,

2005


“On the response of thin-walled CFRP composite tubular components subjected to

static and dynamic axial compressive loading: Experimental”



“On the experimental investigation of crash energy absorption in laminate splaying

collapse mode of FRP tubular components”


350. A.G. Mamalis, A. Markopoulos and D.E. Manolakos

“Micro and nanoprocessing techniques and applications”

Nanotechnology Perceptions, Vol.1, pp. 31/52, 2005

42

351. A.I. Grabchenko, N.I. Grabchenko, M. Kavalec, F. Lierath and A.G. Mamalis

“Tendency of development of integrated technologies and managers training for

technical problems”

Annual Scientific Proceedings on Problems and Perspectives of Forming of

National Humanitarian - Technical Elite, Kharkov, Ukraine, National Technical

University “Kharkov Polytechnic Institute” Publications, Vol. 1, pp.118/123, 2002


“Finite element modeling of the crushing response of square carbon FRP tubes

subjected to static and dynamic axial compression”

Proc. International Conferences on Impact Loading og Lightweight Structures,

Florianapolis, Brazil, May 2005;

in “Impact Loading og Lightweight Structures”, Eds. M. Alves and N. Jones, WIT

Press, Boston, MA, USA, 2005, pp. 373/386

353. V. Kovalenko, A.G. Mamalis and V. Kolpakov

“WEB-technologics application to increase the efficiency of laser industrial

systems”

Proc. 2nd International Conference on Laser Technologies in Welding amd

Materials Processing, Katsiveli, Crimea, Ukraine, May 2005, pp.64/66

354. A.G. Mamalis

“Recent developments in advanced manufacturing of advanced technology

materials”

Invited Lecture

Proc. 2nd International Workshop on Explosion, Shockwave and Hypervelocity

Phenomena, ESHP Workshop 2005, Kumamoto, Japan, July 2005, pp. 49/55

355. A.G. Mamalis, G.L. Petrosyan, D.E. Manolakos, M.B Safayan and H.G. Petrosyan

“On the processing through conical dies of bimetallic tubes under various contact

conditions between layers”

Proc. 8th ICTP Conference, Verona, Italy, October 2005, pp. 221/222

356. A.G. Mamalis

“Fabrication of composite metal laminates by explosive cladding”

Inaugural Address of Prof. G. Parisakis Memory, NTUA Publications, pp.153/164,

2005

357. O.A. Rozenberg, S.V. Sokhan, V.V. Voznyj and A.G. Mamalis

“A study of the integrity of burnishers working surface manufactured from a

diamond composition thermostable material”


2005


“On the crushing response of composite sandwich panels subjected to edgewise

compression: Experimental”


43

359. A.I. Grabchenko, S.N. Lavrynenko, A.G. Mamalis, L.G. Duebner and N.M.

Kirjukhin

“Biomedical functional surfaces generation with control at the nanoscale”

Nanotechnology Perceptions, Vol.1, pp.79/87, 2005

360. Α.Γ. Μάμαλης

“Τεχνολογίες αιχμής μακρο, μικρο και νανοδομημένων υλικών υψηλής

τεχνολογίας”

Ημερίδα “FETEC-Βιομηχανικός Εξοπλισμός, Αθήνα, Οκτώβριος 2005, σελ.1/4 (in

Greek)


“Bending of cylindrical steel tubes: Numericall modeling”

Proc. ICrash 2004, International Crashworthiness Conference, San Francisco,

USA, July 2004;


362. O. A. Rosenberg, J. Gawlik, A.G. Mamalis, V.V. Voznyj, C. Sokhan and D-I.Kim

“Trends and developments in the manufacturing of hip joints: An overview”


2006

363. Α.Γ. Μάμαλης, Κ.Ν. Σπέντζας, Δ.Ε. Μανωλάκος, Μ.Β. Ιωαννίδης και Π.Κ.

Κωστάζος

“Υβριδικές προστατευτικές κατασκευές λεπτού πάχους ηλεκτροκίνητων

σιδηροδρομικών συρμών”

Πρακτικά Διημερίδας ΤΕΕ, “Ηλεκτροκίνητα μέσα μεταφοράς στην Ελλάδα –

Υφιστάμενη κατάσταση και προοπτικές”, Αθήνα, Ιανουάριος 2006 (in Greek)

364. Α.Γ. Μάμαλης, Κ.Ν. Σπέντζας, Δ.Ε. Μανωλάκος, και Μ.Β. Ιωαννίδης

“Ηλεκτροκίνητα οχήματα: Καταστροφική καταπόνηση διατομών λεπτού πάχους

από σύνθετα υλικά”



365. Α.Γ. Μάμαλης, Δ.Ε. Μανωλάκος, και Α.Γ. Κλαδάς

“Προηγμένο σύστημα εξοικονόμησης ενέργειας με χρήση υπεραγωγών υψηλών

θερμοκρασιών σε ηλεκτροκίνητα μεταφορικά μέσα”



366. J. Kundrak, A.G. Mamalis, K. Gyani and A. Markopoulos

“Environmentally-friendly precision machining”


44


“Finite element modelling of the crushing response of composite sandwich panels

with FRP tubular reinforcements”



“The static and dynamic axial collapse of CFRP square tybes: Finite element

modelling”


369. A.G. Mamalis, D.E. Manolakos, A. Kladas and A. Koumoutsos

“Electromagnetic forming tools and processing conditions: Numerical simulation”

Materials and Manugacturing Processes, Vol.21, pp.411/423, 2006


“Development of numerical modelling to simulate the explosive

compaction/cladding of YBCO ceramic powders”

Modelling and Simulation on Materials Science and Engineering, Vol.14,

pp.313/329, 2006

371. A.G. Mamalis, G.L. Petrosyan, D.E. Manolakos and A.F. Hambardzumyan

“Mathematical modelling of plastic deformation processes of bimetallic tubes with

porous internal layer in conical dies”

Journal of Materials Processing Technology, Vol.172, pp.243/248, 2006

372. A.G. Mamalis, G.L. Petrosyan, D.E. Manolakos and H.G. Petrosyan

“Determination of initial compression stresses when extruding bimetallic tubes with

porous internal layer”


373. S.N. Lavrynenko, A.G. Mamalis and O.V. Titarenko

“Thermophysical analysis and modelling of amorphous thermoplastic polymers

ultraprecision single-point cutting”

Proc. 6th EuSPEN International Conference, Wien, Austria, May 2006, pp. 54/57

374. S.N. Lavrynenko, O.V. Titarenko and A.G. Mamalis

“Thermal-physical aspects of mechanical machining process of thermoplastic

polymeric materials”

High Technologies in Machine Building, Kharkov, Ukraine, Vol. 1, Nr. 12,

pp.239/244, 2006 (in Russian)

375. A.G. Mamalis

“An upper bound to roll force for profile ring rolling: Analytical model”

High Technologies in Machine Building, Kharkov, Ukraine, Vol. 1, Nr. 12, pp.

257/274, 2006

45

376. A.G. Mamalis, D.E. Manolakos, A.G. Kladas, A.K. Koumoutsos and S.G.

Ovchinnikov

“Electromagnetic forming of aluminum alloy sheet using a grooved die: Numerical

modelling”

Proc. EASTMAG-2004 Conference, Krasnsoyarsk, Siberia, August 2004;

The Physics of Metals and Metallography, Vol.102 Supplement 1, Chapter 13,

pp.590/593, 2006

377. A.G. Mamalis

“Modern aspects of advanced manufacturing”

Commemorative Volume for the Birth Centenary of Professor M.F. Semko,

National Technical University “Kharkiv Polytechnic Institute”, Kharkov, Ukraine,

2006, pp. 58/73

378. S.N. Lavrynenko, A.G. Mamalis and E.V. Velichko

“Development of systems of quality control of ultraprecision single-point

mechanical machining”

Cutting and Tool in Technological Systems, Kharkov, Ukraine, Vol. 70,

pp.272/277, 2006 (in Russian)

379. I.S. Lavrynenko and A.G. Mamalis

“The effect of drill gcomenty on the cutting characteristies of bone tissue”

Cutting and Tools in Technological Systems, Kharkov, Ukraine, Vol. 71, pp.84/89,

2006 (in Russian)

380. S.N. Lavrynenko and A.G. Mamalis

“Results of modelling of ultraprecision diamond single-point machining of

polymers for bioengineering applications”

Cutting and Tools in Technological Systems, Kharkov, Ukraine, Vol. 71, pp.90/93,

2006 (in Russian)

381. A. G. Mamalis

“Crashworthiness of Vehicles: The impact of NTUA”

Proc. of APSN Workshop on Energy Absorbing Structures and Materials in Railway

and Aerospace, Athens, Greece, July 2006, APSN Report D121, pp.16/19

382. T. Prikhna, W. Gawalek, Y. Savchuk, V.E. Moshchil, N.V. Sergienko, P.A.

Nagorny, V.B. Sverdum, L.K. Kavalek, H.W. Weber,G. Fuchs, M. Zeisberger, O.A.

Rosenberg, A.G. Mamalis and E.A. Paschenko

“Characterization of high-pressure synthesized magnesium diboride for cryogenic

application”

Proc. 4th International Conference on Materials and Coatings for Extreme

Performances: Investigations, Applications, Ecologically Safe Technologies for

their Production and Utilization, Katsiveli, Crimea, Ukraine, September 2006, p.210

46

383. J. Prohászka, A.G. Mamalis, M. Horvath, J. Nyiro and J. Dobranszky

“Effect of microstructure on the mirror-like surface quality of face centred and body

centred cubic metals”


384. A.I. Grabchenko, A.G. Mamalis and S.N. Lavrynenko

“Microwear of cutting tools in ultraprecision single-point diamond machining of

polymers for optical and bioengineering application”

International Journal of Nanomanufacturing, Vol.1, pp.181/188, 2006

385. A.G. Mamalis, J. Ramsden, A.I. Grabchenko, L.A. Lytvynov, V.A. Filipenko and

S.N. Lavrynenko

“A novel concept for the manufacture of individual sapphire-metallic hip joint

endoprostheses”

Journal of Biological Physics and Chemistry, Vol.6, pp.113/117, 2006

386. J. Prohászka, M. Horváth, A.G. Mamalis and J. Nyiro

“Effect of cutting tool and cut materials on their microstructure and the integrity of

mirror cut surfaces”

Surface Engineering, Vol.22, pp.294/298, 2006

387. A.G. Mamalis

“Preface”

Proc. 4th Japanese/Mediterranean Joint Workshop on Applied Electromagnetic

Engineering for Magnetic, Superconducting and Nanomaterials, JAPMED 4, Cairo,

Egypt, September 2005;

Journal of Materials Processing Technology, Vol.181, p.1, 2007

388. A.Szálay, D. Horvath, I. Vajda, A.G. Mamalis and D. Harnois

“Influence of some metallic additives on the flux trapping ability of high

temperature superconducting ceramics”





389. A.G. Mamalis

“Recent advances in nanotechnology”




Journal of Materials Processing Technology, Vol.181, pp. 52 /58, 2007

47

390. T. Prikhna, W. Gawalek, N. Novikov, Y. Savchuk, M. Zeisberger, A.G. Mamalis,

N. Sergienko, V. Moshchil, M. Wendt, T. Habisreuther, S.X. Dou, S. Dub, V.

Melvikov, C. Schmidt, J. Dellith and P. Nagorny

“High-prescure synthesized nanostructural magnesium diboride-based materials for

superconductive electromotors, generators and pumps”






“On the precision single-point machining of polymeric materials”


Engineering for Magnetic Superconducting and Nanomaterials, JAPMED 4, Cairo,



392. A.G. Mamalis, G.L. Petrosyan, D.E. Manolakos and A.F. Hambardzumyan

“The effect of strain hardening in the extrusion of bimetallic tubes of porous internal

layer”





393. A.G. Mamalis, K.A. Lytvynov, V.A. Filipenko, S.N. Lavrynenko, J.J. Ramsden and

P.N. Soukakos

“Perfection of contemporary hip-joint endoprostheses by using a sapphire-sapphire

friction pair”


394. A.G. Mamalis

“Potential cooperation between NTUA and Ukraine in the advanced manufacturing

of advanced materials sector: An overview”

Proc. 14th International Conference on Information Technology Education, Health,

“MicroCAD 2007”, Kharkov, Ukraine, May 2007, pp.1/40


“Micromechanics investigation of directional fracture of polymers in ultraprecision

cutting process”

Proc. 14th International Conference on Information Technology, Education, Health,

“Micro CAD 2007”, Kharkov, Ukraine, May 2007, pp.139/143;

in “Contemporary Technology in the Machine Building”, Ed. A.I. Grabchenko,

NTU “KhPI”, Kharkov, Ukraine, 2007, pp. 317/321

48

396. A.G. Mamalis, A.T. Pugachov, V.V. Starikov and S.N. Lavrynenko

“Bioactive electret coatings of stems for new generation of individual hip-joint

endoprostheses”

Proc. 14th International Conference on Information Technology, Education, Health,

“Micro CAD 2007”, Kharkov, Ukraine, May 2007, pp.144/147

397. S. Theodoropoulou, D. Papadimitriou, A.G. Mamalis, D.E. Manolakos, R. Klenk

and M. Ch. Lux-Steiner

“Band-gap energies and strain effects in CuIn1-x GaxS2 based solar-cells” Semiconductors Science and Technology, Vol.22, pp.933/940, 2007

398. A.G. Mamalis, A. Szálay, N. Göbl, S. Marinel, I. Kotsis, M. Enisz and I.N. Vottea

“Material and levitation characteristics of explosively compacted metal-sheathed

HTC/YBCO discs”

Proc. 4th International Working Conference on Total Quality Management

Advanced and Intelligent Approaches, Belgrade, Serbia, May 2007, pp.175/179

399. A. G. Mamalis

“Advanced materials under shock”

Proc. 9th International Symposium on Plasticity and Impact Mechanics,

IMPLAST’07, Bochum, Germany, August 2007, Eds. O.T. Bruhns and A. Meyers,

The University Press Bochum, pp.327/334

400. A. G. Mamalis

“Structural Crashworthiness: The Impact of NTUA”

Keynote Paper

Proc. 4th International Conference on Science and Technology of Composite

Materials, COMAT 2007, Rio de Janeiro, Brazil, December 2007, pp.KN 1/7

401. A.G. Mamalis, K.N. Spentzas, D.E. Manolakos, N.G.Pantelelis and M.B. Ioannidis

“Crash behaviour of an innovative metal/composite sandwich structure”

Proc. 4th International Conference on Science and Technology of Composite

Materials, COMAT 2007, Rio de Janeiro, Brazil, December 2007, pp. PG 1/7

402. V.V. Starikov, S.L. Starikova, A.G. Mamalis, S.N. Lavrynenko and J.J. Ramsden

“Application of niobium and tantalum oxides for implants surface passivation”


403. A.G. Mamalis, K.N. Spentzas, D.E. Manolakos, N. Pantelelis and M.B. Ioannidis

“Structural and impact behaviour of an innovative low cost sandwich panel”

Proc. ICrash 2006 International Crashworthiness Conference, Athens, Greece, July

2006;


49

404. A.G. Mamalis, K.N. Spentzas, D.E. Manolakos, M.B. Ioannidis and G.P.

Papapostolou

“Experimental investigation of the collapse modes and the main crushing

characteristics of composite sandwich panels subjected to flexural loading”

Proc. ICrash 2006 International Crashworthiness Conference, Athens, Greece, July

2006;


405. A.G. Mamalis

“Processing of advanced materials using conventional and shock techniques”

Proc. 2nd International Symposium on Explosion, Shock Wave and Hypervelocity

Phenomena, ESHP, Kumamoto, Japan, March 2007;

Materials Science Forum, Vol. 566, pp. 141-148, 2008

406. A.G. Mamalis

“Recent trends of applied superconductivity”

Keynote Paper


Engineering for Magnetic, Superconducting and Nanomaterials, JAPMED’5,

Larnaca, Cyprus, September 2007;

Journal of Optoelectronics and Advanced Materials, Vol.10, pp.979/999, 2008

407. A.G. Mamalis, E. Hristoforou, D.E. Manolakos, P. Svec, T. Prikhna,

J.D.Theodorakopoulos and G. Kouzilos

“Explosive compaction and synthesis of MgB2 superconductor using the powder in tube technique”


Engineering for Magnetic, Superconducting and Nanomaterials, JAPMED 5,

Larnaka, Cyprus, September 2007;


408. T. Prikhna, W. Gawalek, A.G. Mamalis, Y. Savchuk, N. Sergienko, M. Wendt, T.

Habisreuther, J. Noudem, X. Chaud, V. Moshchil, V. Turkevich, P. Nagorny, A.

Kozyrem, J. Dellith, C. Schmidt, D. Litzendorf, U. Dittrich and S. Dub

“High presure and hot–pressing manufactured magnesium diboride, the inclusions

of higher borides as possible pinning centres in the material”


Engineering for Magnetic, Superconducting and Nanomaterials, JAPMED 5,

Larnaka, Cyprus, September 2007;


409. A.G. Mamalis, D. Barbarigou, A. Litke, D. E. Manolakos, M. B. Ioannidis, P. K.

Kostazos, V.I. Andronikou and E.A. Karanastasis

“Bending of cylindrical steel tubes: Numerical simulation using Grid computing”


50

410. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, K.N. Spentzas and S.

Koutroubakis

“Static axial collapse of foam-filled steel thin-walled rectangular tubes:

Experimental and numerical simulation”


411. A.G. Mamalis, J. Kundrák, A. Markopoulos and D.E. Manolakos

“On the finite element modelling of high speed hard turning”


2008

412. A.G. Mamalis, K.N. Spentzas, N.G. Pantelelis, D.E.Manolakos and M.B.

Ioannidis

“A new hybrid concept for sandwich structures”


413. A.G. Mamalis, M. Rucki and S.N. Lavrynenko

“Measurement of spherical head of hip joint endoprosthesis with acceptable

tolerance of form in 1μm”

Proc. 10th Anniversary EuSPEN International Conference, Zϋrich, Switzerland,

May 2008, Vol. I, pp. 343/347

414. L.A. Lytvynov, M. Rucki, A.G. Mamalis and S.N. Lavrynenko

“Peculiaritries of making of sapphire-on-sapphire bearings new generation for

bipolar femoral endoprostheses”

Proc. 10th Anniversary EuSPEN International Conference, Zϋrich, Switzerland,

May 2008, Vol.II, pp. 602/606

415. M.K. Monastyrov, T.A. Prikhna, A.G. Mamalis, W. Gawalek, P.M. Talanchuk and

R.V. Shekera

“Electroerosion dispersion-prepared nano- and submicrometre-sized aluminium and

alumina powders as power-accumulating substances”

Nanotechnology Perceptions, Vol. 4, pp. 179/187, 2008

416. A. Szàlay, N. Gőbl, D. Horvath and A.G. Mamalis

“Magnetizing equipment for producing superconducting permanent magnets of high

temperature superconducting bulks”

Proc. 13th Biennial IEEE Conference on Electromagnetic Field Computation, IEEE

CEFC 2008, Athens, Greece, May 2008

417. S.N. Lavrynenko, A.V. Sirenko and A.G. Mamalis

“Features of new generation endoprosthesis manufacturing with pair friction

“sapphire-sapphire””

High Technologies in Machine Building, Kharkov, Ukraine, Vol. 1, pp.165/168,

2008 (in Ukrainian)

51

418. S.N. Lavrynenko, A.V. Sirenko and A.G. Mamalis

“Features of draft machining of sapphire for manufacturing of endoprosthesis pairs

friction”

Cutting and Tools in Technological Systems, Kharkov, Ukraine, Vol. 74,

pp.191/194, 2008 (in Russian)

419. P. Grzelka, A.G. Mamalis, S.N. Lavrynenko and P. Andralojc

“Measurement of spherical surface with scanning system GOM ATOS II”

in “Advanced Technologies in Machine Building”, Vol.2, Ed. A.I. Grabchenko,

NTU “KhPI”, Kharkov, Ukraine, 2008, pp.135/440

420. M. Wieczorowski, A.G. Mamalis, M.Rucki and S.N. Lavrynenko

“Interferometry and scanning microscopy in asperities measurements of biomedical

surfaces”


421. A.G. Mamalis, A.K. Vortselas and D.E. Manolakos

“Multiscale modelling of wear by combined use of numerical and statistical

methods”

Proc. 9th International Conference on Technology of Plasticity, ICTP 2008,

Gyeongju, Korea, September 2008, pp.223/228

422. V.V Kutsevlyak, S.L. Starikova, V.V. Starikov, A.G. Mamalis, S.N. Lavrynenko,

and J. J. Ramsden

“Influence of implant surface modification on integration in bone tissue”

Journal of Biological Physics and Chemistry, Vol. 8, pp. 147/150, 2008

423. A.G. Mamalis and E.Hristoforou

“Magnetostrictive behaviour of ribbons and wires: Analytical modelling and

experimental validation”


424. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, D.G. Chronopoulos and P.K.

Kostazos

“On the Crashworthiness of composite rectangular thin-wall tubes internally

reinforced with aluminium or polymeric froams: Experimental and numerical

simulation”

Composite Structures, Vol 89, pp.416/423, 2009

425. A.G. Mamalis, E. Hristoforou, D.E. Manolakos, T. Prikhna, I.D. Theodorakopoulos

and G. Kouzilos “Explosively consolidated powder-in-tube MgB2 superconductor aided by post- thermal treatment”

IEEE Transactions on Applied Superconductivity, Vol.19, No 1, pp.20/27, 2009

52

426. A.G. Mamalis

“Dynamic treatment of particles from macro- to nanoscale”

in: “Processing: Science, Innovations and Industrial Implementation” Eds. A.

Deribas and Yu. Scheck, Torus Press Ltd, Moscow, Russia, 2008, pp. 32

427. A.G. Mamalis, E. Hristoforou, D.E. Manolakos and I.D. Theodorakopoulos

“Compaction and synthesis of MgB2 superconductors by explosive techniques” in: “Processing: Science, Innovations and Industrial Implementation” Eds. A. Deribas and Yu. Scheck, Torus Press Ltd, Moscow, Russia, 2008, pp. 38-39

428. V.S. Lazaris, A.G. Kladas, A.G. Mamalis and J.A. Tegopoulos

“Analysis of end zone magnetic field in generators and shield optimization for force

reduction on end windings”

Proc. 13th Biennial IEEE Conference on Electromagnetic Field Computation, IEEE

CEFC 2008, Athens, Greece, May 2008;

IEEE Trsansactions on Magnetics, Vol. 45, No 3, pp. 1470/1473, 2009

429. A.G. Mamalis, K.N. Spentzas, D.E. Manolakos and M.B. Ioannidis

“Composite and hybrid materials for next generation road and rail vehicles”

Proc. Synenergy Forum Conference, Spetses, Greece, May 2008, pp. 9/16, 2009

430. K.N. Spentzas, A.G. Mamalis, D.E. Manolakos, G. Michael, M.B. Ioannidis and

S.I. Koutroubakis

“Automobile in the next generation”

Proc. Synenergy Forum Conference, Spetses, Greece, May 2008, pp. 17/22, 2009

431. A.G. Mamalis, D.E. Manolakos, K. Spentzas, M.B. Ioannidis, S. Koutroubakis and P.

K. Kostazos

“The affect of the implementation of circular holes as crush initiators to the crushing

characteristics of mild steel square tubes: Experimental and numerical simulation”

Proc. ICrash 2008 International Crashworthiness Conference, Kyoto, Japan, July

2008;

International Journal of Crashworthiness, Vol. 14, pp. 489/501, 2009

432. A.G. Mamalis, A. Szálay and T. Rath

“Preparation of metal/metal and metal (ceramic component parts by explosive

compaction”

Proc. 5th European Federation of Explosives Engineers World Conference,

Budapest, April 2009, pp. 279/284

433. A. Szálay, A.G. Mamalis and T. Rath

“Design and infrastructure of the special Laboratory serving the development of

explosive metalworking technologies”

Proc. 5th European Federation of Explosives Engineers World Conference World

Conference, Budapest, April 2009, pp. 285/291

53

434. A.G. Mamalis, N. Pantelelis, K.N. Spentzas and N. Efentakis

“In-situ process monitoring and reliable cure control applied in RTM production of

epoxy/carbon fibre parts”

Proc. 5th International Conference of Science and Technology of Composite

Materials, COMATCOMP 2009, San Sebastian, Spain, October 2009, p. 867

435. A.G. Mamalis, A.I. Grabchenko, V.A. Fedorovich and J. Kundrak

“Methodology of 3D simulation of processes in technology of diamond composite

materials”

International Journal of Advanced Manufacturing Technology, Vol. 43,

pp.1235/1250, 2009

436. A.G. Mamalis, A. Markopoulos and J. Kundrák

“Simulation of high speed hard turning using the finite element method”

Journal of Machining and Forming Technologies, Vol 1, pp.1/15, 2009

437. J. Prohászka, A.G. Mamalis and Z. Gáal

“The cause of the uncertainty of the elastic limit”

CIRP Journal of Manufacturing Science and Technology, Vol 2, pp. 70/74, 2009

438. S.N. Lavrynenko, A.G. Mamalis and M.S. Dunajchuk

“Control of labour body in precision technological system of errors in cutting tools”

High Technologies in Machine Building, Kharkov, Ukraine, Vol. 1, pp. 110/116,

2009 (in Russian)

439. A.G. Mamalis, S.N. Lavrynenko, E.E. Zaporochenco and M.S. Dunajchuk

“Modeling of contact length of cutting tool edge with processed material depending

on feed value and cutting depth”

High Technologies in Machine Building, Kharkov, Ukraine, Vol. 2, pp. 82/86, 2009

(in Russian)

440. S.N. Danilchenko, O.V. Kalinkevich, M.V. Pogorelov, A.N. Kalinkevich, A.M.

Sklyar, T.G. Kalinichenko, V.Y. Ilyashenko, V.V. Starikov, V.I. Bumeyster, V.Z.

Sikora, L.F. Suknodub, A.G. Mamalis, S.L. Lavrynenko and J.J. Ramsden

“Chitosan-hydroxyapatite composite biomaterials made by one step co-

precipitation method: preparation, characterization and in vivo tests”


441. J. Prohászka, A.G. Mamalis and Z. Gaál

“The effect of the elastic and plastic anisotropy on the elastic-plastic deformation

region”

Journal of Machining and Forming Technologies, Vol 2, pp. 317/323, 2010

442. A.G. Mamalis, A.T. Pugachov, V.V. Starikov, V.E. Ved, S.N. Lavrynenko, and E.

Kakaras

“Catalyst systems for exhausted gases neutralization of internal-compuction

engines”

Journal of Tribology and Surface Engineering, Vol 1, pp. 315/319, 2010

54

443. O. Lysenko, A.G. Mamalis and E. Mitskevich

“Surface nanomachining using scanning tunneling microscopy with diamond tip”


444. A.G. Mamalis, K.N. Spentzas, G. Kouzilos, I.D. Theodorakopoulos and N.G.

Pantelelis

“On the high density polyethylene extrusion: Numerical, analytical and

experimental modeling”

Advances in Polymer Technology, Vol. 29 pp.172/184, 2010

445. M.S. Sazanova, E.E. Zapovozhchenko, S.N. Lavrynenko and A.G. Mamalis

“Increasing of accuracy determinate of microprofile periodic components of

ultraprecision machined surfaces”

in “Modern Technologies of Engineering”, Vol.5, NTU “KhPI”, Kharkov, Ukraine,

2010, pp 209/217 (in Russian)

446. A.G. Mamalis and D.P. Papapostolou

“Experimental inrestigation of strain rate effects on the crushing characteristics of

composite sandwich panels”

International Journal of Crashworthiness, Vol 15, pp. 581/603, 2010

447. A.G. Mamalis, N. Pantelelis, K. Spentzas and N. Efentakis

“Process monitoring and cure control applied in RTM production of epoxy/carbon

fibre parts”

Proc.1st TMS-ABM International Materials Congress, Rio de Janeiro, Brazil, July

2010, pp.4568/4567, 2010

.

448. A.G. Mamalis, E. Hristoforou, I.D. Theodorakopoulos and T. Prikhna

“Critical current density investigations of explosively compacted and extruded

powder-in-tube MgB2 superconductors” Superconductor Science and Technology, Vol. 23, Nr. 095011, pp. 1/9, 2010

449. P. Andrakojc, M. Rucki, S.N. Lavrynenko and A.G. Mamalis

“Comprehensive measurement of spherical head of hip-joint endoprosthesis with

acceptable tolerance of form in 1 μm”

Proc. International Conference on Innovative Technologies IN-TECH, Prague,

Czech Republic, September 2010, pp 171/173

450. J. Kundrák, A.G. Mamalis, K.Gyani and V. Bana

“Surface layer microhardness changes with high-speed turning of hardened steels”

International Journal of Advanced Manufacturing Technology, Vol 53, pp.105/112,

2011

55

451. A.G. Mamalis, E.V. Karsnokutskiy and V.E. Ved

“Creation of ordered nanostructure catalytically active surfaces for the organization

of selective sequence of multistep and multiroute chemical reactions”

Bulletin of National Yechnical University “Kharkov Polytechnic Institute”,

Kharkov, Ukraine, Vol. 47, pp. 17/33, 2010 (in Russian)

452. S.N. Lavrynenko, E.E. Zaporozshchenko, S. Sazonova and A.G. Mamalis

“Analysis of a microgeometrical structure of ultraprecision polymeric products

surfaces”

High Technologies in Machine Building, Kharkov, Ukraine, Vol. 1, pp. 151/156,

2011 (in Russian)

453. T. Prikhna, W. Gawalek, Y. Savchuk, A.G. Mamalis, V. Tkach, H. Weber, T.

Habisreuther, M. Eisterer, W. Karau, M. Wendt, N. Sergienko, V. Moshchil, A.

Kozyrev, P. Nagorny, C. Schmidt, V. Melnikov, J. Dellith, D. Litzkendorf, J.

Noudem, X. Chaud, V. Sverdum and A. Starostina

“High pressure synthesized magnesium diboride and dodecaboride-based

superconductors: Structure and properties”

Proc. 6th Japanese / Mediterranean Joint Workshop on Applied Electromagnetic

Engineering for Magnetic Superconducting and Nanomaterials, JAPMED 6,

Bucharest, Romania, July 2009;

Materials Science Forum, Vol. 670, pp. 21/27, 2011

454. A.G. Mamalis and E. Hristoforou “On the magnetic and magnetoelastic uniformity measurements on Fe78Si7B15 amorphous ribbons and wires”



Bucharest, Romania, July 2009;


455. A.G.Mamalis, G. Kouzilos, A.K. Vortselas

“Design feature sensitivity analysis in numerical modeling of extrusion spider dies”

Proc. 5th International Conference on Times of Polymers and Composites, Ischia,

Italy, June 2010, pp 40/42;

Journal of Applied Polymer Science, Vol. 122, pp. 3537/3543, 2011

456. A.G. Mamalis, I.D. Theodorakopoulos and A.K. Vortselas “Numerical simulation of explosively compacted powder–in–tube MgB2 superconductors”

Proc. 3rd International Symposium on Explosion, Shockwave and High Energy

Reaction Phenomena 2010 (ESHP Symposium 2010), Seoul, S.Korea, September

2010;


56

457. O. Lysenko, V. Grushko, E. Mitskevich and A.G. Mamalis

“Scanning probe microscopy with diamond tip in tribo-nanolithography”

Proc. Symposium VV: Novel Development and Applications of Scanning Probe

Microscopy, MRS Fall Meetings, Boston MA, USA, November 2010;

Materials Research Society Symposium Proceedings, Vol. 1318, pp. 179/183, 2011

458. G.V. Didenko, L.V. Sorokina, Fu. G. Shpak, O.A. Golub, O.G. Lysenko, G.P.

Potebnya and A.G. Mamalis

“The application of fullerene C60 for modification of anticancer vaccine based on metabolism products of bacillus subtilis-7025”



“Methodical approaches to the creation of the technological process of precision

diamond machining of optical polymers”

Proc. 19th Scientific Research and Practical Conference on Information

Technologies: Science, Technique, Technology, Education, Health, Kharkov,

Ukraine, March 2011, p. 115

460. A.G. Mamalis, J.J. Ramsden, G.C. Holt, A.K. Vortselas and A.A. Mamali

“The effect of nanotechnology in mitigation and adaptation strategies in response to

climate change”


461. A.G. Mamalis, A.I. Grabchenko, V.A. Fedorovich, J. Kundrak, Y. Babenko and T.

Dovbiy

“Chemical deposition of nickel with inclusion of ultradispersed diamonds”


462. A.G. Mamalis, I.D. Theodorakopoulos and A.K. Vortselas

“Optimisation of the explosive compaction process for powder-in-tube MgB2 superconductors using numerical simulation”

Proc. 2nd International Conference on Material Modeling, ICMM2- 12th EMMC,

Paris, France, August 2011;

Technische Mechanik, Vol. 32, pp. 416/424, 2011

463. T. Prikhna, A.G. Mamalis, W. Gawalek, J. Noudem, A. Soldatov, Y. Savchuk, V.

Moshchil, M. Eisterer, H. Weber, S. Dub, T. Hubisreuther, J. Dellith, S. You, C.

Schmidt, F. Karau, U. Ditttrich, I. Vajda, N. Sergienko, V. Sokolovsky, D.

Litzkendorf, X. Chand, V. Sverdun and R. Kuznietsov

“Spark plasma synthesis and sintering of superconducting MgB2-based materials” Proc. 7th Japanese / Mediterranean Joint Workshop on Applied Electromagnetic Engineering for Magnetic Superconducting and Nanomaterials, JAPMED 7, Budapest, Hungary, July 2011;


57

464. A.G. Mamalis, A. Kladas and I.D. Theodorakopoulos

“Numerical Simulation of MgB2 superconducting magnetic energy storage coil” Proc. 7th Japanese / Mediterranean Joint Workshop on Applied Electromagnetic Engineering for Magnetic Superconducting and Nanomaterials, JAPMED 7, Budapest, Hungary, July 2011;


465. E. Hristoforou and A.G. Mamalis

“Temperature distribution sensors based on the magnetostrictive delay line

principle”



Budapest, Hungary, July 2011;


466. A.G. Mamalis, A.I. Grabchenko, V.A. Fedorovich and I. Kundrak

“Simulation of effects of metal phase, in a diamond grain and bonding type on

temperature in diamond grinding”


195/200, 2012

467. O.A. Rosenberg, E.A. Pashchenko and A.G. Mamalis

“Experimental determination of the interparticle contact structure in densified iron

powders”

Journal of Materials Engineering and Performance, Vol. 21, pp.1099/1105, 2012

468. A.G. Mamalis, A.K. Vortselas and G. Kouzilos

“Tube extrusion of polymeric materials: Optimization of processing parameters”

Journal of Applied Polymer Science, Vol. 126, pp. 186/193, 2012.

469. A.T. Pugachov, V.V. Starikov, A.V. Taranukha, L.M. Udonenko, A.G. Mamalis

and S.N. Lavrynenko

“Investigation of charge transfer and degradation features in bilayer Zr-ZrO2”, Journal of Materials Engineering and Performance, Vol. 21, pp. 553/557, 2012

470. A.G. Mamalis, A.I. Grabchenko, V.A. Fedorovich, J. Kundrak and E.A. Babenko

“Ways of simulation-based improvement in the performance of diamond-abrasive

tools”

Journal of Machining and Forming Technologies, Vol. 4, No. 1/2, pp. 1/11, 2012

471. S Sofronov, E.M Sofronova, V.V Starikov, V.N. Baymer, K.A. Kudin, P.V.

Matejchenco, A.G Mamalis and S.N. Lavrynenko. “Microwave synthesis of tetragonal phase CdWO4” Materials and Manufacturing Processes, Vol. 27, pp. 490/493, 2012

58

472. A.G. Mamalis

“Manufacturing of advanced materials from macro-, micro-, to nanoscale”

Plenary Paper

Proc 13th International Conference on Tools, ICT-2012, Miskolc, Hungary, March

2012, pp. 27/32

473. A.G. Mamalis, M.S. Sozonova, E.F. Zaporozhchenko and S.N. Lavrynenko

“Determination of angulaer errors between rectilinear positions”

Proc. 20th MicroCad 2012, Kharkov, Ukraine, May 2012, p.125


“Single asperity wear modeling of ceramic surfaces using the smooth particle

hydrodynamics method”

Journal of Tribology and Surface Engineering, Vol. 2 No. 3/4, pp. 253/266, 2012


“Wear of ceramic interfaces: Multiscale statistical simulations”

Wear, Vol. 294/295, pp. 402/408, 2012

476. S. Sotronov, E.M. Sofronova, V.V Starikov, A. Yu. Voloshko, V.N. Baymer, K.A.

Kubin, P.V. Matejchenko, A.G. Mamalis and S.N. Lavrynenko

“Microwave synthesis of cadmium and zinc tungstates”

Journal of Materials Engineering and Performance, Vol 21, pp.2323 /2327, 2012

477. S.N. Lavrynenko, E.E. Zaporozhchenko, M.S. Sazonova and A.G. Mamalis

“Model of analytical determination of the slice thickness in micromilling by

multiteeth tool components”

Advanced Technologies in Machine Building / Collection of Scientific Edition of

NTU “KhPI”, Kharkov, Ukraine, Issue 7, pp. 52/57, 2012 (in Russian)

478. A.G. Mamalis, L. Lukács, A. Szálay, I. Zadov

“Metal forming with explosives for high efficiency heat exchanger”

Proc. 11th International Conference on Drilling and Blasting Technology-2012,

Balatonkenese, Hungary, Septemeber 2102, pp. 153/164 (in Hungarian)

479. A.G. Mamalis, K.N. Spentzas, N. Pantelelis, G. Michael, T. Vrouvakis and G.

Kouzilos

“On the design and structural analysis of electric vehicles”

Proc. International Conference on Crashworthiness, ICRASH 2012, Milano, Italy,

July 2012

480. A.G. Mamalis, A.K. Vortselas and C.N. Panagopoulos

“Analytical and numerical wear modeling of metallic interfaces: A statistical

asperity approach”

Tribology Transactions, Vol. 56 pp. 121/129, 2012

59

481. O. Lysenko, V. Grushko, E. Mitshevych and A.G. Mamalis

“Combined nanopatterning and characterization of silicon surface using scanning

tunneling microscopy with conductive diamond tip”

Proc. IEEE International Conference on Nanotechnology, Birmingham, U.K.,

August 2012, pp. 1/4

Published on line 20-23.8.2012, DOI: 10.1109/NANO.2012.6322123

482. A.G. Mamalis, O.V. Buzhinov, O.P. Smirnov, V.J. Dvadnenko, K.N. Spentzas and

S.N. Lavrynenko

“Ways of reducing the cost of hybrid vehicle electric drive”

Proc. EEVC European Electric Vehicle Congress, Brussels, November 2012

483. Ch. Chantzikomis, K.N. Spentzas and A.G. Mamalis

“Environmental and economic effects of generalized introduction of electric

vehicles in Greece”

Proc. EEVC European Electric Vehicle Congress, Brussels, November 2012

484. A.G. Mamalis, A.I. Grabchenko, V.A. Fedorovich, D.V. Romashov and D.O.

Fedorenko

“Principles of 3D modeling of the production and application of diamond-composite

materials”


485. A.I. Grabchenko, D.V. Romashov, D.O. Fedorenko, V.A. Fedorovich, A.G.

Mamalis and J. Kundrak

“Prevention of manufacturing defects of diamond composite materials by

simulating the process at a micro level.”


486. D.S. Sofronov, E.M. Sofronova, V.V. Starikov, V.N. Baymer, P.Matejchenko,

S. Galkin, A. Lalajants, A.G. Mamalis and S. Lavrynenko

“Microwave synthesis of ZnSe”

Journal of Materials Engineering and Performance, Vol. 22, pp. 1637/1641, 2013

487. A.G. Mamalis, K. Spentzas, D.P. Papapostolou and N. Pantelelis

“Finite element investigation of the influence of materials properties on the crushing

characteristics of in plane loaded composite panels”

Thin-Walled Structures, Vol. 63, pp. 163 /174, 2013

488. A.G. Mamalis, K.N. Spentzas and A.A. Mamali

“The impact of the automotive industry and its supply chain to climate change:

Some techno-economic aspects”

Journal of European Transport Research Review, Vol. 5, pp. 1/10, 2013

489. D.S. Sofronov, Yu.A. Zagoruiko, N.O. Kovalenko, A.S. Gerasimenko, V.N.

Baumer, P.V. Matejchenko, A.G. Mamalis and S.N. Lavrynenko “Microwave synthesis of MgSe for Zn1-xMgxSe crystal growth” Materials and Manufacturing Processes, Vol. 28, pp. 944/946, 2013

60

490. P. Rácz, N. Göbl, D. Horváth and A.G. Mamalis

“Aspects of electrodynamic forming processes”

Proc. 4th International Symposium on Explosion, Shockwave and High Energy

Reaction Phenomena 2013 (ESHP Symposium 2013), Okinawa, Japan, March

2013;


491. A. Szálay, A.G. Mamalis, I. Zador, A. Vortselas and L. Lukacs

“Explosive metalworking: Experimental and numerical modeling aspects”

Proc. 4th International Symposium on Explosion, Shockwave and High Energy

Reaction Phenomena 2013 (ESHP Symposium 2013), Okinawa, Japan, March

2013;


492. S.O. Rudchenko, A.T. Pugachov, V.E. Pukha, V.V. Starikov, S.N. Lavrynenko and

A.G. Mamalis

“Carbon films for photovoltaic devices”


493. A.G. Mamalis, A.I. Grabchenko, D.V. Romashov, D.O. Fedorenko, D. Lagoudas,

V.A. Fedorovich, J. Kundrak

“Determination of the diamond wheel structure in high speed grinding using

nanoindentation techniques: Experimental and numerical simulation”


494. D.S. Sofronov, N.N. Kamneva, A.V. Bulcakova, P.V. Mateychenko, V.N. Baumer,

K.N. Belikov, V.A. Chebanov, S.N. Lavrynenko and A.G. Mamalis

“Effect of anions and pH of the medium on the formation of ZnS micro- and

nanoparticles from thiourea solutions”


495. E.M. Sofronova, O.I. Kostenyukova, D.S. Sofronov, V.V. Starikov, A.M.

Lebedynskiy, P. V. Mateychenko, S.N. Lavrynenko and A.G. Mamalis

“Structure and optical properties of ZnSe films obtained by the hydromechanical

sedimentation method”


496. A.G. Mamalis

“Preface JAPMED’8”


Engineering for Magnetic, Superconducting, Multifunctional and Nanomaterials,

JAPMED’8, Athens, Greece, June 2013;

Materials Science Forum, Vol. 792, pp. T-4/T-9, 2014

61

497. A.G. Mamalis

Plenary Paper

“Shock loading of advanced materials from macro-, micro - to nanoscale”





498. T. Prikhna, M. Eisterer, W. Gawalek, A.G. Mamalis, A. Kozyrev, V. Kovylaev, E.

Hristoforou ,H.W. Weber, J. Noudem, W. Goldacker, V. Moshchil, X. Chaud , V.

Sokolovsky, A. Shaternik, I. Dellith, C. Schmidt, T. Habisreuther, D. Litzkendorf,

S. Dub, A. Borimskiy, N. Sergienko, V. Sverdun and E. Prisyazhnaya “Structure and functional properties of bulk MgB2 superconductors synthesized and sintered under pressure.”





499. P. Rácz, N. Göbl, D. Horváth and A.G. Mamalis

“Joining of tubular parts by electromagnetic forming: Experimental investigations.”





500. P. Vourna, A. Ktena, A. Mpalliou, A.G. Mamalis and E. Hristoforou

“Steel health monitoring using magnetic techniques”





501. A. Szálay, A.G. Mamalis, A.K. Vortselas, I. Zador and L. Lukacs

“Reduction of the contact corrosion on the electrical networks by applying

bimetallics”





502. V. Gonda, P. Rácz, D. Horváth and A.G. Mamalis

“Joining of tubular parts by electromagnetic forming: Computational investigations

of strength.”





62

503. T. Prikhna, W. Gawalek, Y. Savchuk, V. Tkach, N. Danilenko, M. Wend,

J. Dellith, H. Weber, M. Eisterer, V. Moshchil, N. Sergienko, A. Kozyrev,

P. Nagorny, A. Shapovalov, V. Melnikov, S. Dub, D. Litzkendorf, T. Habisreu-

ther, C. Schmidt, A.G. Mamalis, V. Sokolovsky, V. Sverdun, F. Karau and A.

Starostina

“Higher borides and oxygen-enriched Mg-B-O inclusions as possible pinning

centers in nanostructural magnesium diboride and the influence of additives on

their formation”

Physica C Superconductivity, DOI: 10.1016/j.physc.2010.02.064, pp.1/4, 2010

504. I. Elyasi-Komari, A. Gorbenko, V. Kharchenko and A.G. Mamalis

“Analysis of computer network reliability and criticality: Technique and features”

International Journal of Communications, Network and System Sciences, Vol. 4,

pp. 720/726, 2011

505. A.I. Grabchenko, D.V. Romashov, D.O Fedorenko, A.G. Mamalis, D.

Lagoudas. V.A. Fedorovich, and T. Vaxevanis

“Simulation of the effect of sintering on the quality of diamond grains in the

grinding wheel”


506. A.G. Mamalis , G. Tokhtar, S.N. Lavrynenko and I. S Lavrynenko

“Quality control and dynamic modelling of ultraprecision processing of bio-

polymeric surfaces ”

Journal of Machining and Forming Technologies, Vol. 6, pp. 99/104, 2014

507. Ch. Chantzikomis, K.N. Spentzas and A.G. Mamalis

“Environmental and economic effects of widespread introduction of electric

vehicles in Greece”

Journal of European Transport Research Review, Vol. 6, pp. 365/376, 2014

508. S. Sashikumar, A.G. Mamalis and E.C. Chirwa

“Theoretical considerations of the failure mechanism of an aluminium 'egg-box'

energy absorber”

Proc. International Conference on Crashworthiness, ICRASH 20124, Kuching,

Sarawak, Malaysia, August 2014, Paper ICP-14-49

509. S. Sashikumar, K. Chode, K.D. Andrews, N. Reeves, A.G. Mamalis and G.

Cooper

“Investigation of loading effects on a hip implant in a vehicle occupant involved in

a frontal crash”

Proc. International Conference on Crashworthiness, ICRASH 20124, Kuching,

Sarawak, Malaysia, August 2014, Paper ICP-14-61

63

510. S. E. Sheykin, I. M. Pohrelyuk and A.G. Mamalis

“On the effectiveness of commercially pure titanium–chirulen endoprosthetic

friction pairs”


511. D.S. Sofronov, E.M. Sofronova, N.O. Kovalenko, V.V. Starikov, A.S.

Gerasimenko, V.N. Baumer, A.M. Lebedinsky, P.V. Matejchenko, E.V. Grishina,

S.N. Lavrynenko and A.G. Mamalis

“Obtaining a ZnSe furnace charge from aqueous solution”


512. A.G. Mamalis, A.I. Grabchenko, A.V. Mitsyk,V.A. Fedorovich and J. Kundrak

“Mathematical simulation of motion of working medium at finishing grinding

treatment in the oscillating reservoir”

International Journal of Advanced Manufacturing Technology, Vol. 70,

pp. 263/276, 2014

513. A.G. Mamalis, J. Kundrak, A.V. Mitsyk and V.A. Fedorovich

“Development of modular machine design and technologies of dynamic action for

finishing-grinding treatment by an oscillating abrasive medium”

Journal of Machining and Forming Technologies, Vol 7, pp. 1 /10, 2015

514. M. Khan, S.R. Gul, J. Li, WB. Cao and A.G. Mamalis

“Preparation, characterization and visible light photocatalytic activity of silver, nitrogen co-doped TiO2 photocatalyst” Materials Research Express, Vol. 2, 066201, pp.1/6, 2015 DOI: 10.1088/2053-1591/2/6/066201

515. V.V. Starikov, S.L Starikova, A.G. Mamalis and S.N. Lavrynenko

“Stimulation of calcium phosphate crystals formation by implant surfaces with

electret properties”


516. A.G. Mamalis




JAPMED’9, Sofia, Bulgaria, July 2015;

Materials Science Forum, Vol. 856, p. V, 2016

517. T. Prikhna, V. Sokolovsky, V. Meerovich, M. Eisterer, A.G. Mamalis, A.

Kozyrev, W. Gawalek, V. Moshchil, V. Sverdun, H.W. Weber, V. Kovylaev,

W. Goldacker, M. Karpets, T. Basyuk, M. Wu and N. Sergienko

“Processing of bulk MgB2 superconductors for application in fault current limiters” Proc. 9th Japanese / Mediterranean Joint Workshop on Applied Electromagnetic Engineering for Magnetic, Superconducting, Multifunctional and Nanomaterials, JAPMED’9, Sofia, Bulgaria, July 2015 ;


64

518. A. Ferraro, A.G. Mamalis and E. Hristoforou

“Monitoring magnetic nanoparticles in the body”


Engineering for Magnetic, Superconducting, Multifunctional and Nanomaterials

JAPMED’ 9, Sofia, Bulgaria, July 2015;


519. A.G. Mamalis, E.S. Gevorkyan and S. N. Lavrynenko

“Features of sintering of ZrO2 nanopowders and composition with different content of Al2O3” Proc. 9th Japanese / Mediterranean Joint Workshop on Applied Electromagnetic




520. E.D. Metaxa, K. Berkesi, D. Musmarra, A.G. Mamalis and E. Hristoforou

“Synthesis of superparamagnetic nanoparticles for desalination purposes”





521. A.G. Mamalis, G. Tokhtar and I. S. Lavrynenko

“Vibrations in high speed boring process of bioengineering polymers”





522. P. Vourna, A. Ktena, A.G. Mamalis, E. Hristoforou, PW. Chen and Q. Zhou

“Magnetic Barkhausen measurements for determining residual stress distribution in

welded electrical steels”





523. S. Chen, M. Ahmadiantehrani, J. Zhao, S. Zhu, A.G. Mamalis and X. Zhu

“Heat-up synthesis of Ag-In-S and Ag-In-S/ZnS nanocrystals: Effect of indium

precursors on their optical properties”

Journal of Alloys and Compounds, Vol. 665, pp. 137/143, 2016

DOI: 10.1016/j.jallcom.2016.01.035

65

524. O.G. Lysenko, V.I. Grushko, S.N. Dub, E.I. Mitshevich, N.V. Novikov and

A.G. Mamalis

“Manufacturing and characterization of nanostructures using scanning tunneling

microscopy with diamond tip”

Journal of Nano Research, Vol. 42, pp. 14/46, 2016


“Diamond biocompatible coatings for medical implants”


526. V. L. Khavin, I. S. Lavrynenko, A.G. Mamalis and S. N. Lavrynenko

“Features dynamic influence of cutting tools on bone by drilling”

Proc. 23th International Conference on Information Technologies: Science,

Engineering, Technologies, Education, Health (MicroCAD - 2015), Kharkov,

Ukraine, May 2015, pp..../…

527. I.M. Pohrelyuk, S.E. Sheykin, S.M. Dub, A.G. Mamalis, I.Yu. Rostotskii, O.V.

Tkachuk and S.M. Lavrys

“Increasing the functionality of c.p. titanium/UHMWPE tribo-pairs by

thermodiffusion nitriding of titanium component”

Biotribology, Vol. 7, pp. 38/45, 2016


“Features of medical implants passivation using anodic oxide films”


529. E. Hristoforou, A. Samara, A. Ferraro, A.G. Mamalis and X. Zhu

“Over-hyperthermia using magnetic Fe nanoparticles”

Biointerface Research in Applied Chemistry, Vol. 6, pp. 1762/1796, 2016

530. V.V. Starikov, A.V. Kostuchenko, S.L Starikova, A.G. Mamalis and S.N.

Lavrynenko

“Properties of magnetron hydroxyapatite coating deposited on oxidized substrate”


531. V. L. Khavin, I. S. Lavrynenko, S. N. Lavrynenko and A.G. Mamalis

“Physical model of interaction between cutting tool and living bone tissue in

surgical drilling”

Proc. 24th International Conference on Information Technologies: Science,

Technique, Technology, Education, Health (MicroCAD - 2016), Kharkov,

Ukraine, May 2016, pp..../…

532. A.G. Mamalis, A.I. Grabchenko, V.A. Fedorovich and D.V. Romashov

“Improving the design of diamond wheel for high-speed grinding”

Journal of Machining and Forming Technologies, Vol. 8, pp. 1/12, 2016

66

533. J. Kundrak, A.G. Mamalis, G. Szabo, Z. Palmai and K. Gyani

“Numerical examination of residual stresses developing during hard turning

at different rake angles”


1989/1999, 2017

DOI: 10.1007/s00170-016-9229-5

534. A.G. Mamalis

“Advanced manufacturing from macro- to nanoscale: Impact and shock loading ”

Plenary Lecture: Proc. 5th International Symposium on Explosion, Shockwave

and High Strain-rate Phenomena V 2016 (ESHP 2016), Beijing, PR China,

September 2016;


DOI: 10.4028/www.scientific.net/MSF.910.58

535. K. Odaci, C. Kılıçaslan, A. Taşdemirci, A.G. Mamalis and M. Güden

“Projectile impact testing aluminum corrugated core composite sandwiches

using aluminum corrugated projectiles: Experimental and numerical investigation”

Proc. 5th International Symposium on Explosion, Shockwave and High Strain-

rate Phenomena 2016 (ESHP 2016), Beijing, PR China, September 2016;


DOI: 10.4028/www.scientific.net/MSF.910.58

536. M. Khan, S.M. Shah, W.U. Shah, D.F. Khan, A.G. Mamalis and HQ Yin

“Thermodynamic study of binary alloy system (Cr-Fe) using Calphad method”

Surface Review and Letter, Vol…, pp…/.., 2017 DOI: 10.1142/S0218625X1850049X

537. S. Chen, M.S. Zaeimian, J.H.S.K. Monteiro, J. Zhao, A.G. Mamalis, A. de

Bettencourt-Dias and X. Zhu

“Mn doped Ag-In-Zn-S/ZnS nanocrystals: Synthesis and optical properties”

Journal of Alloys and Compounds, Vol. 725, pp. 1077/1083, 2017

538. J. Kundrak, A.G. Mamalis, V.A. Fedorovich, I. Pyzhov and N. Kryukova

“Evaluation of the characteristics of diamond grinding wheels at their production

and operation stages”

International Journal of Advanced Manufacturing Technology, Vol…., pp…./…,

2017 DOI 10.1007/s00170-017-0950-5

539. A.G. Mamalis




JAPMED’10, Izmir, Turkey, July 2017;

Materials Science Forum, Vol. 915, p. V, 2018

http://www.scientific.net/MSF.910.58

http://www.scientific.net/MSF.910.58

67

540. T. Prikhna, M. Eisterer, A.G. Mamalis, V. Romaka, V. Sokolovsky, A. Kozyrev,

M. Karpets, V. Moshchil, V. Sverdun and S. Ponomaryov

“Structure and properties of magnesium diboride, effect of additions”



JAPMED’10, Izmir, Turkey, July 2017 ;


541. T. Damatopoulou, V. Lazaris, A. Kladas and A.G. Mamalis

“Electromagnetic compatibility issues in electric vehicle applications”





542. S.N. Lavrynenko, A.G. Mamalis, D.S. Sofronov, A. Odnovolova and V.V. Starikov

“Synthesis Features of Iron Oxide Nanopowders with High Magnetic and Sorption

Properties”





543. X. Zhu, V.G. Demillo, S. Chen and A.G. Mamalis

“Development of non-cadmium I-III-VI quantum dots and their surface

modification for biomedical applications”





544. S.N. Lavrynenko, A.G. Mamalis and E.S. Gevorkyan

“Features of consolidation of nanoceramics for aerospace industry”





545. E. Hristoforou and A.G. Mamalis

“Advances in stress tensor monitoring in steels”





68

546. A.G. Mamalis

“Introductory remarks on the Shockwaves Cluster”





547. A.G. Mamalis

“Advanced manufacturing under shock”





548. A.G. Mamalis

“Trends and developments in advanced manufacturing from macro- to nanoscale”

Keynote Lecture: Proc. 3rd International Symposium on New and Advanced

Technologies for Energy, Environment and Sustainable Development (SIPS 2017),

Cancun, Mexico, October 2017

549. F. Marquis, N. Chikhradze and A.G. Mamalis

“Advantages, challenges and opportunities of wind power systems”

Proc. 3rd International Symposium on New and Advanced Technologies for

Energy, Environment and Sustainable Development (SIPS2017), Cancun, Mexico,

October 2017

550. M. Khan, S.M. Shah, W.U. Shah, D.F. Khan, HQ Yin and A.G. Mamalis

“On the thermodynamics of (Cr-Fe) alloy using Thermo-calc techniques”

Journal of Biological Physics and Chemistry, Vol. …, pp. ../.., 2018

PATENTS

1. European Patent 1563953 (03386024.8), 2005

A.G. Mamalis, N.V. Novikov, O.A. Rosenberg, S.V. Sokhan

“The Way of Machining of Spherical Surfaces and the Device for its Realisation”

2. Ukrainian Patent 37950 (MPK B24B1/00, B24B17/00), No. 2000052622, 2001

A.I. Grabchenko, V.L. Dobroskok, A.G. Mamalis, Yu.L. Uvarova, Ja.M. Garaschenko

“Methods of Non-Round Articles Grinding”

Date post:	25-Apr-2018
Category:	Documents
Upload:	dokhanh
View:	218 times
Download:	1 times

BOOKS / MONOGRAPHS - FLOGEN Star OUTREACH · BOOKS / MONOGRAPHS 1. W. Johnson and A.G. Mamalis...

Documents