BOOST YOUR PRODUCTIVITY!cctool.com/files/Productivity_Kit_Catalog_web.pdf(Seco grade numbers are...

BOOST YOUR PRODUCTIVITY!

SECO PRODUCTIVITY KIT CATALOG

2

CHECK OUT THE LATEST & GREATEST AT AN AFFORDABLE KIT PRICE

NOW FEATURING NEW DURATOMIC® TECHNOLOGY! INDEXABLE DRILLING

Perfomax is the Seco range of indexable insert drills. The strong, square inserts offer four cutting edges per insert and the possibility to use our most modern insert grades.

Crownloc® is a range of Seco drills with exchangeable crowns, designed to offer high quality holes at a lower cost. Featuring new geometry, coating and locking interface, Crownloc improves chip evacuation and wear resistance in a variety of materials. Moreover, it requires no regrinding or resetting. Decrease your cost-per-hole and get longer tool life. Crownloc offers superior wear resistance as well as hole quality; increasing the output and saving you money. Drilling begins on page 42.

SOLID END MILLINGIn addition, we now feature Niagara solid end milling kits. From general purpose to elite series cutters, our offering has an end mill for every type of application. See page 34.

We now feature our NEW Duratomic® chrome coating technology for steel turning, on page 6. This new edge intelligence coating makes it impossible to discard unused inserts. We also have several other options for turning kits for materials such as stainless steels, cast iron and high temp alloys. Whether you are looking for an insert for a finishing operation or a heavy roughing operation, or maybe something in between, there are kits available for all types of operations. Kits are also available for products featuring our Jetstream Tooling technology. Not only is it available for turning but now also grooving and cut-off applications. For turning, start on Page 5.

MULTIPLE-EDGE MILLING FOR LARGE AND SMALL JOBS Negative cutters with positive effective cutting rake angles, such as Double Octomill and Square 6, provide multiple benefits. They allow the use of double sided inserts giving the economy of a negative milling cutter, and the Square T4-08 tangentially mounted insert cutter. The positive geometries used on these cutters reduce heat generation, therefore providing extended tool life. They also provide freer cutting action which lowers power consumption and wear and tear on your machine tool.

For high performance square shoulder milling, the Turbo family of cutters is the industry’s most comprehensive and versatile solution. Turbo 10 is the newest addition to the range that also includes Turbo 6, Turbo 12 and Turbo 18. The Turbo family uses the insert cutting edge length in the new naming convention which describes exactly what it is, thus making it easier for you to find the right tool. Turbo kits are available from 3/8 to 2” diameters and can take up to .669” depth of cut in profiling applications. New to the kit family of face milling is the LN14 which provides four thick cutting edges giving the added toughness needed in difficult materials. Milling begins on page 17.

3

As part of a truly global company, your local Seco representative represents a literal world of resources dedicated to supporting your operations. Offering a diverse portfolio of tooling, toolholding systems and value added services, we provide solutions for the metalworking industry.

For over 80 years, Seco has developed the tools, processes and services that manufacturers turn to for maximum profitability. Throughout our history, we have continuously led the charge to develop new technologies to address the ever-changing demands faced by manufacturers.

Kits are non-returnable.

TURNING, GROOVING & CUT-OFF Duratomic® - Steel ..................... 6Stainless Steel ............................ 7Cast Iron .................................... 8High Temp Alloys ..................... 9Jetstream Tooling Duo ............ 10MDT & X4 ............................... 11150.10....................................... 12

THREADINGInternal & External .............14-15

SQUARE SHOULDER MILLING Square T4 - 08 ......................... 18Square 6 - 04 ............................ 19

Square 6 - 08 ............................ 20Turbo 6 .................................... 21Turbo 10 .................................. 22Turbo 12 .................................. 23Turbo 18 .................................. 24

FACE MILLING LN14 ........................................ 25Double OctoMill - 05 .............. 26Double OctoMill - 09 .............. 27QuattroMill - 09 ....................... 28QuattroMill -12 ........................ 29

COPY MILLING High Feed 2 ............................. 30

High Feed 4 ............................. 31K2 Ballnose ..........................32-33

SOLID END MILLING Niagara Cutter™ GP C430 ....... 34Niagara Cutter™ Elite A345 .... 35Niagara Cutter™ Stabilizer ..36-37Solid End Milling: JS500 ......... 38

DRILLING Perfomax® ............................40-41Crownloc® ................................ 42

SMG v2....................................43-47

SAVE MONEY & BOOST YOUR PRODUCTIVITY! Save on our most popular products with these economical Productivity Kits! We have grouped milling cutters, turning tools and drill bodies with a pack of our best-selling inserts to give you the best deal possible.

To place an order, call your local authorized Seco distributor. For a list of distributors in North America, visit www.secotools.com/us/dist

4

TURNING,GROOVING,& CUT-OFF

5

TURNINGMaking it easy! That’s what Seco is all about. The next five pages highlight an exciting selection of turning product kits that will work tremendously in many applications, whether you are machining steel or high temp alloys.

THE FIRST STEP IS TO IDENTIFY THE MATERIAL YOU ARE CUTTING...

Steels Page 6 Stainless Steels Page 7 Cast Irons Page 8 High Temp Alloys Page 9

CHIP GROOVES Let the Secolor Cube help you determine which kit is best for your process. Generally, we describe these types of operations as Finishing, Medium-Rough Machining, or Rough Machining.

Finish Machining – Lighter depths of cut and lighter feed rates. Chip control can be problematic. Ideally we want chip grooves that are designed for light depth and light feed.

Always remember, that it is important in most cases to achieve depth of cut equal to or greater than the nose radius size.

Medium-Rough Machining – Rough operations at medium feeds and medium depths of cut. Lighter duty machinery with lower horsepower, smaller components, along with thin walled parts is a good fit.

Rough Machining - Operations can be aggressive in depth of cut, and feed rates. Part surfaces can be challenging and shows signs of scale or other irregular surface conditions.

GRADES Grades are offered with either more toughness or more wear resistance in mind depending on the operation being performed and the material that is being cut. (Seco grade numbers are based on the ISO classification system.)

A lower number means a harder grade, offering more wear resistance and higher spindle speeds. For example, TP1501 is harder than TP2501.

For our full product range, see our Turning Machining Navigator.

FINISH MACHINING At low depth of cut Typical ap = .008-.032” and f = .008 in/rev.

MEDIUM-ROUGH MACHINING Typical one pass machining at ap = .032-.120” and f = .012 in/rev.

ROUGH MACHINING At higher depth of cut and feed rate in most cases with difficult surface conditions such as scale, irregularities and other conditions leading to interruptions and edge damage. Typically ap = .120-.280” and f = .020 in/rev.

SUPERALLOYS & TITANIUM (ISO-S)

STEEL (ISO-P)

STAINLESS STEEL (ISO-M)

CAST IRON (ISO-K)

6

TURNING

STEELSteel turning kits are available in four grades, including TP1501 and TP2501 featuring the new Duratomic coating process. Advanced geometries for general machining and profiling, and a 1.0” toolholder, ensure you can find what you need. The “D” style holders draw inserts down and back into the pocket for more secure insert holding.

FEATURED GRADES TP1030 – A PVD coated cermet grade designed for light finishing TP1501 NEW! – Very productive grade for high speed machining of steels TP2501 NEW! – The world’s best general purpose grade for all types of ferrous materials TP3500 (The original Duratomic) – High edge toughness and reliability for more demanding operationsNEW CHROME

TECHNOLOGY!

Insert style Chipgroove D.O.C. (ap) Inchf

(ipr)

Vc (sfpm)

600 1000 1400 1800CNMG 432 MF2 0.010 - 0.100 0.003 - 0.016CNMG 432 M5 0.020 - 0.160 0.010 - 0.024CNMG 432 MR7 0.040 - 0.160 0.012 - 0.024DNMG 432 MF2 0.010 - 0.100 0.002 - 0.012WNMG 432 M5 0.020 - 0.160 0.010 - 0.024WNMG 432 MR7 0.040 - 0.160 0.012 - 0.024

| | | | | | | | | |

TP1030

TP2501

TP3500

APPLICATION DATA – STEEL TURNING

Kit includes one toolholder, ten inserts and a wrench.GENERAL PURPOSE STEEL TURNING KITS

TP1501

EDP Kit Tool Insert (10 pcs.) Price

FINISH

82636 TRN 1.0 RH-CNMG 432-MF2 TP1030 DCLNR 16-4D CNMG 432-MF2 TP1030 $15082637 TRN 1.0 LH CNMG 432-MF2 TP1030 DCLNL 16-4D CNMG 432-MF2 TP1030 $15082638 TRN 1.0 RH DNMG 432-MF2 TP1030 DDJNR 16-4D-M DNMG 432-MF2 TP1030 $18582639 TRN 1.0 LH DNMG 432-MF2 TP1030 DDJNL 16-4D-M DNMG 432-MF2 TP1030 $18582640 TRN 1.0 RH CNMG 432-MF2 TP1501 DCLNR 16-4D CNMG 432-MF2 TP1501 $15082641 TRN 1.0 LH CNMG 432-MF2 TP1501 DCLNL 16-4D CNMG 432-MF2 TP1501 $15082642 TRN 1.0 RH DNMG 432-MF2 TP1501 DDJNR 16-4D-M DNMG 432-MF2 TP1501 $17582643 TRN 1.0 LH DNMG 432-MF2 TP1501 DDJNL 16-4D-M DNMG 432-MF2 TP1501 $175

MEDIUM

41593 TRN 1.0 RH CNMG 432-M5 TP1501 DCLNR 16-4D CNMG 432-M5 TP1501 $15041595 TRN 1.0 LH CNMG 432-M5 TP1501 DCLNL 16-4D CNMG 432-M5 TP1501 $15082644 TRN 1.0 RH WNMG 432-M5 TP1501 DWLNR 16-4D WNMG 432-M5 TP1501 $16082645 TRN 1.0 LH WNMG 432-M5 TP1501 DWLNL 16-4D WNMG 432-M5 TP1501 $16082646 TRN 1.0 RH CNMG 432-M5 TP2501 DCLNR 16-4D CNMG 432-M5 TP2501 $15082647 TRN 1.0 LH CNMG 432-M5 TP2501 DCLNL 16-4D CNMG 432-M5 TP2501 $15082648 TRN 1.0 RH WNMG 432-M5 TP2501 DWLNR 16-4D WNMG 432-M5 TP2501 $16082649 TRN 1.0 LH WNMG 432-M5 TP2501 DWLNL 16-4D WNMG 432-M5 TP2501 $160

ROUGH

82650 TRN 1.0 RH CNMG 433-MR7 TP2501 DCLNR 16-4D CNMG 433-MR7 TP2501 $15082651 TRN 1.0 LH CNMG 433-MR7 TP2501 DCLNL 16-4D CNMG 433-MR7 TP2501 $15082652 TRN 1.0 RH WNMG 433-MR7 TP2501 DWLNR 16-4D WNMG 433-MR7 TP2501 $16082653 TRN 1.0 LH WNMG 433-MR7 TP2501 DWLNL 16-4D WNMG 433-MR7 TP2501 $16081533 TRN 1.0 RH CNMG 433-MR7 TP3500 DCLNR 16-4D CNMG 433-MR7 TP3500 $15081538 TRN 1.0 LH CNMG 433-MR7 TP3500 DCLNL 16-4D CNMG 433-MR7 TP3500 $15082654 TRN 1.0 RH WNMG 433-MR7 TP3500 DWLNR 16-4D WNMG 433-MR7 TP3500 $16082655 TRN 1.0 LH WNMG 433-MR7 TP3500 DWLNL 16-4D WNMG 433-MR7 TP3500 $160

SAVE UP TO $110

7

TURNING

STAINLESS STEELStainless steel turning kits are available with a choice of two original Duratomic grades – TM2000 for high cutting speeds and maximum productivity, and TM4000 for the extra toughness needed for reliability in interrupted cuts. The MF4 chipbreaker has a unique design for enhanced productivity and longer tool life in stainless turning, for unprecedented performance and excellent surface finish. The “D” style holders draw inserts down and back into the pocket for more secure insert holding.

FEATURED GRADESTM2000 – Heat and wear resistance for high productivityTM4000 – Very tough grade for interrupted cut machining


(ipr)

Vc (sfpm)

400 500 600 700 800CNMP 432 MF1 0.010 - 0.120 0.003 - 0.024CNMG 432 MF4 0.030 - 0.120 0.008 - 0.016CNMG 432 M5 0.020 - 0.160 0.010 - 0.024CNMG 432 MR7 0.040 - 0.160 0.012 - 0.024DNMP 432 MF1 0.010 - 0.160 0.006 - 0.020WNMG 432 MF4 0.030 - 0.120 0.008 - 0.020

| | | | | | | | | |

TM2000

TM4000

APPLICATION DATA – STAINLESS STEEL TURNING

Kit includes one toolholder, ten inserts and a wrench.GENERAL PURPOSE STAINLESS STEEL TURNING KITS

FEATURING ORIGINAL DURATOMIC® TECHNOLOGY!


FINISH

82656 TRN 1.0 RH CNMP 432-MF1 TM2000 DCLNR 16-4D CNMP 432-MF1 TM2000 $15082657 TRN 1.0 LH CNMP 432-MF1 TM2000 DCLNL 16-4D CNMP 432-MF1 TM2000 $15082658 TRN 1.0 RH WNMP 432-MF1 TM2000 DWLNR 16-4D WNMP 432-MF1 TM2000 $15082659 TRN 1.0 LH WNMP 432-MF1 TM2000 DWLNL 16-4D WNMP 432-MF1 TM2000 $15082660 TRN 1.0 RH CNMP 432-MF1 TM4000 DCLNR 16-4D CNMP 432-MF1 TM4000 $15082661 TRN 1.0 LH CNMP 432-MF1 TM4000 DCLNL 16-4D CNMP 432-MF1 TM4000 $15082662 TRN 1.0 RH WNMP 432-MF1 TM4000 DWLNR 16-4D WNMP 432-MF1 TM4000 $15082663 TRN 1.0 LH WNMP 432-MF1 TM4000 DWLNL 16-4D WNMP 432-MF1 TM4000 $150

MEDIUM

41348 TRN 1.0 RH CNMG 432-MF4 TM2000 DCLNR 16-4D CNMG 432-MF4 TM2000 $15041349 TRN 1.0 LH CNMG 432-MF4 TM2000 DCLNL 16-4D CNMG 432-MF4 TM2000 $15041351 TRN 1.0 RH WNMG 432-MF4 TM2000 DWLNR 16-4D WNMG 432-MF4 TM2000 $15041355 TRN 1.0 LH WNMG 432-MF4 TM2000 DWLNL 16-4D WNMG 432-MF4 TM2000 $15041362 TRN 1.0 RH CNMG 432-MF4 TM4000 DCLNR 16-4D CNMG 432-MF4 TM4000 $15041363 TRN 1.0 LH CNMG 432-MF4 TM4000 DCLNL 16-4D CNMG 432-MF4 TM4000 $15041365 TRN 1.0 RH WNMG 432-MF4 TM4000 DWLNR 16-4D WNMG 432-MF4 TM4000 $15041366 TRN 1.0 LH WNMG 432-MF4 TM4000 DWLNL 16-4D WNMG 432-MF4 TM4000 $150

ROUGH

82664 TRN 1.0 RH CNMG 432-M5 TM2000 DCLNR 16-4D CNMG 432-M5 TM2000 $15082665 TRN 1.0 LH CNMG 432-M5 TM2000 DCLNL 16-4D CNMG 432-M5 TM2000 $15082666 TRN 1.0 RH CNMG 432-M5 TM4000 DCLNR 16-4D CNMG 432-M5 TM4000 $15082667 TRN 1.0 LH CNMG 432-M5 TM4000 DCLNL 16-4D CNMG 432-M5 TM4000 $15079195 TRN 1.0 RH WNMG 432-M5 TM4000 DWLNR 16-4D WNMG 432-M5 TM4000 $15081954 TRN 1.0 LH WNMG 432-M5 TM4000 DWLNL 16-4D WNMG 432-M5 TM4000 $15082668 TRN 1.0 RH CNMG 432-MR7 TM4000 DCLNR 16-4D CNMG 432-MR7 TM4000 $15082669 TRN 1.0 LH CNMG 432-MR7 TM4000 DCLNL 16-4D CNMG 432-MR7 TM4000 $150

SAVE UP TO $110

8


(ipr)

Vc (sfpm)

600 800 1000 1200 1400CNMG 432 M4 0.010 - 0.160 0.002 - 0.024CNMG 432 M5 0.010 - 0.160 0.002 - 0.024CNMG 432 MR7 0.010 - 0.160 0.002 - 0.024CNMA 433 – 0.010 - 0.200 0.004 - 0.035DNMG 432 M3 0.010 - 0.160 0.004 - 0.035WNMG 432 M5 0.010 - 0.160 0.004 - 0.024WNMG 432 MR7 0.010 - 0.160 0.012 - 0.024WNMA 433 – 0.010 - 0.120 0.004 - 0.035

| | | | | | | | | |

TK1001

TK2001

APPLICATION DATA – CAST IRON TURNING

Kit includes one toolholder, ten inserts and a wrench.GENERAL PURPOSE CAST IRON TURNING KITS

TURNING

CAST IRONAchieve excellent results with Seco’s original Duratomic cast iron turning grades TK1001 and TK2001. The TK1001 is the ideal insert for achieving increased productivity in gray irons. TK1001’s supreme wear resistance, can handle the heat and has no problem with higher speed. TK2001 is the reliable insert grade for gray and ductile irons, where unstable conditions and interrupted cut are present. TK2001 is an ideal choice in light finishing applications because it maintains a sharp edge.

FEATURED GRADESTK1001 – Hard and wear resistant. Ideal in gray iron at high speeds for increased productivity TK2001 – Tough and reliable in demanding operations and can also be used for finishing, excellent in both gray and ductile irons where instability is present



FINISH

82671 TRN 1.0 RH DNMG-432 M3 TK2001 DDJNR-16-4D-M DNMG 432-M3 TK2001 $17582670 TRN 1.0 LH DNMG-432 M3 TK2001 DDJNL-16-4D-M DNMG 432-M3 TK2001 $17509182 TRN 1.0 RH CNMG-432 M4 TK1001 DCLNR-16-4D CNMG 432-M4 TK1001 $15009181 TRN 1.0 LH CNMG-432 M4 TK1001 DCLNL-16-4D CNMG 432-M4 TK1001 $15009185 TRN 1.0 RH CNMG-432 M4 TK2001 DCLNR-16-4D CNMG 432-M4 TK2001 $15009183 TRN 1.0 LH CNMG-432 M4 TK2001 DCLNL-16-4D CNMG 432-M4 TK2001 $150

MEDIUM

09199 TRN 1.0 RH CNMG-432 M5 TK2001 DCLNR-16-4D CNMG 432-M5 TK2001 $15009198 TRN 1.0 LH CNMG-432 M5 TK2001 DCLNL-16-4D CNMG 432-M5 TK2001 $15023173 TRN 1.0 RH WNMG-432 M5 TK2001 DWLNR-16-4D WNMG 432-M5 TK2001 $15023174 TRN 1.0 LH WNMG-432 M5 TK2001 DWLNL-16-4D WNMG 432-M5 TK2001 $15082673 TRN 1.0 RH CNMG-432 MR7 TK2001 DCLNR-16-4D CNMG 432-MR7 TK2001 $15082672 TRN 1.0 LH CNMG-432 MR7 TK2001 DCLNL-16-4D CNMG 432-MR7 TK2001 $15009216 TRN 1.0 RH WNMG-432 MR7 TK2001 DWLNR-16-4D WNMG 432-MR7 TK2001 $15009217 TRN 1.0 LH WNMG-432 MR7 TK2001 DWLNL-16-4D WNMG 432-MR7 TK2001 $150

ROUGH

09163 TRN 1.0 RH CNMA-433 TK1001 DCLNR-16-4D CNMA 433 TK1001 $15009162 TRN 1.0 LH CNMA-433 TK1001 DCLNL-16-4D CNMA 433 TK1001 $15009165 TRN 1.0 RH CNMA-433 TK2001 DCLNR-16-4D CNMA 433 TK2001 $15009164 TRN 1.0 LH CNMA-433 TK2001 DCLNL-16-4D CNMA 433 TK2001 $15082675 TRN 1.0 RH WNMA-433 TK2001 DWLNR-16-4D WNMA 433 TK2001 $15082674 TRN 1.0 LH WNMA-433 TK2001 DWLNL-16-4D WNMA 433 TK2001 $15009202 TRN 1.0 RH CNMG-433 MR7 TK2001 DCLNR-16-4D CNMG 433-MR7 TK2001 $15009201 TRN 1.0 LH CNMG-433 MR7 TK2001 DCLNL-16-4D CNMG 433-MR7 TK2001 $15082677 TRN 1.0 RH WNMG-433 MR7 TK2001 DWLNR-16-4D WNMG 433-MR7 TK2001 $15082676 TRN 1.0 LH WNMG-433 MR7 TK2001 DWLNL-16-4D WNMG 433-MR7 TK2001 $150

SAVE UP TO $110

9

TURNING

HIGH-TEMP ALLOYSHigh Temp Turning Kits feature a choice of left or right hand holders and three styles of inserts for side turning and profiling of a range of high temperature alloys. The “D” style holders draw inserts down and back into the pocket for more secure insert holding.

FEATURED GRADESTS2000 – Higher speed machining with increased wear and notching resistance TS2500 – Medium grade for high temp alloys, has added toughness for demanding operations TH1000 – Very hard wear resistant grade ideal in nickel based alloys


(ipr)

Vc (sfpm)

100 200 300 400 500CNMP 432 MF1 0.010 - 0.120 0.003 - 0.012CNMG 432 MF4 0.030 - 0.120 0.006 - 0.014CNMG 432 MR3 0.020 - 0.160 0.005 - 0.014CNMG 432 MR4 0.020 - 0.160 0.007 - 0.016DNMP 432 MF1 0.010 - 0.120 0.003 - 0.012WNMG 432 MF4 0.030 - 0.120 0.006 - 0.014

| | | | | | | | | |

TH1000

TS2000

APPLICATION DATA – HIGH TEMP ALLOY TURNING

Kit includes one toolholder, ten inserts and a wrench.GENERAL PURPOSE HIGH TEMP ALLOY TURNING KITS

TS2500

FEATURING PVD COATED INSERTS!


FINISH

82618 TRN 1.0 RH CNMP-432 MF1 TH1000 DCLNR-16-4D CNMP 432-MF1 TH1000 $15082619 TRN 1.0 LH CNMP-432 MF1 TH1000 DCLNL-16-4D CNMP 432-MF1 TH1000 $15082620 TRN 1.0 RH DNMP-432 MF1 TH1000 DDJNR-16-4D-M DNMP 432-MF1 TH1000 $17582622 TRN 1.0 LH DNMP-432 MF1 TH1000 DDJNL-16-4D-M DNMP 432-MF1 TH1000 $17594533 TRN 1.0 RH CNMP-432 MF1 TS2000 DCLNR-16-4D CNMP 432-MF1 TS2000 $15094534 TRN 1.0 LH CNMP-432 MF1 TS2000 DCLNL-16-4D CNMP 432-MF1 TS2000 $15094535 TRN 1.0 RH DNMP-432 MF1 TS2000 DDJNR-16-4D-M DNMP 432-MF1 TS2000 $17594536 TRN 1.0 LH DNMP-432 MF1 TS2000 DDJNL-16-4D-M DNMP 432-MF1 TS2000 $175

MEDIUM

82624 TRN 1.0 RH CNMG 432-MF4 TS2000 DCLNR-16-4D CNMG 432-MF4 TS2000 $15082625 TRN 1.0 LH CNMG 432-MF4 TS2000 DCLNL-16-4D CNMG 432-MF4 TS2000 $15082626 TRN 1.0 RH WNMG 432-MF4 TS2000 DWLNR 16-4D WNMG 432-MF4 TS2000 $15082627 TRN 1.0 LH WNMG 432-MF4 TS2000 DWLNL 16-4D WNMG 432-MF4 TS2000 $15082628 TRN 1.0 RH CNMG 432-MF4 TS2500 DCLNR-16-4D CNMG 432-MF4 TS2500 $15082629 TRN 1.0 LH CNMG 432-MF4 TS2500 DCLNL-16-4D CNMG 432-MF4 TS2500 $15082630 TRN 1.0 RH WNMG 432-MF4 TS2500 DWLNR 16-4D WNMG 432-MF4 TS2500 $15082631 TRN 1.0 LH WNMG 432-MF4 TS2500 DWLNL 16-4D WNMG 432-MF4 TS2500 $150

ROUGH

82632 TRN 1.0 RH CNMG 432-MR3 TS2000 DCLNR-16-4D CNMG 432-MR3 TS2000 $15082633 TRN 1.0 LH CNMG 432-MR3 TS2000 DCLNL-16-4D CNMG 432-MR3 TS2000 $15082634 TRN 1.0 RH CNMG 432-MR4 TS2500 DCLNR-16-4D CNMG 432-MR4 TS2500 $15082635 TRN 1.0 LH CNMG 432-MR4 TS2500 DCLNL-16-4D CNMG 432-MR4 TS2500 $150

SAVE UP TO $110

10

TURNING

JETSTREAM TOOLING® DUOParticularly effective on titanium and high temp alloys where chip control is problematic, Jetstream Tooling is a revolutionary way to improve chip control in almost all materials. We recommend a minimum pump pressure of 200 psi, but you’ll see dramatic improvements in chip control, tool life, and the opportunity to use increased cutting speeds as the pressure is increased to 1000 psi.

FEATURED GRADES TS2000 – A unique TiAlN coating, with improved coating adhesion, and a new edge preparation technique combined to give you increased speed capability, improved surface finishes and better tool life consistency. TS2500 – A tougher alternative to TS2000, also with the improved TiAlN coating. The added toughness of this grade offering fits better into a general environment where more security may be needed. CP500 – A very tough PVD coated alternative to TS2500. Works well in low SFM applications, and offers greater application security, especially in components with irregular surfaces. This grade handles interrupted cutting and scaled surfaces with ease.

APPLICATION DATA

Refer to Seco Machining Navigator Turning Catalog for full Seco Material Group listing. Kit includes one holder, a wrench and ten inserts.JETSTREAM TOOLING KITS

The use of Jetstream Tooling typically requires the use of a hose kit to connect the holder to the tool block. Hose kits can be found in the Machining Navigator Turning Catalog.

Insert Style Chipgroove ap (inch) f (ipr)CNMP 4 MF1 .010 - .120 .003 - .012CNMG 4 MF4 .030 - .120 .006 - .014CNMG 4 MR3 .020 - .160 .005 - .014CNMG 4 MR4 .020 - .160 .007 - .016DNMP 4 MF1 .010 - .100 .004 - .009DNMG 4 MR3 .020 - .100 .005 - .014DNMG 4 MR4 .020 - .100 .006 - .016

Grade

SFM

SMG S1 SMG S2 SMG S3 SMG S11

TS2000 Vc (SFM) 150 - 270 120 - 210 110 - 190 170 - 300

TS2500 Vc (SFM) 140 - 240 110 - 190 100 - 170 150 - 270

CP500 Vc (SFM) 100 - 160 80 -140 70 -120 110 -200

FEATURING PVD COATED INSERTS

EDP Kit Tool Insert (10 pcs.) Price 95° ...JETL 94628 JET 1.0 RH CNMP 432-MF1 TS2000 PCLNR-16-4DJETL CNMP 432-MF1 TS2000 $275

94629 JET 1.0 LH CNMP 432-MF1 TS2000 PCLNL-16-4DJETL CNMP 432-MF1 TS2000 $27594630 JET 1.0 RH CNMP 432-MF1 CP500 PCLNR-16-4DJETL CNMP 432-MF1 CP500 $27594631 JET 1.0 LH CNMP 432-MF1 CP500 PCLNL-16-4DJETL CNMP 432-MF1 CP500 $27594636 JET 1.0 RH CNMG 432-MF4 TS2000 PCLNR-16-4DJETL CNMG 432-MF4 TS2000 $27594637 JET 1.0 LH CNMG 432-MF4 TS2000 PCLNL-16-4DJETL CNMG 432-MF4 TS2000 $27594638 JET 1.0 RH CNMG 432-MF4 TS2500 PCLNR-16-4DJETL CNMG 432-MF4 TS2500 $27594639 JET 1.0 LH CNMG 432-MF4 TS2500 PCLNL-16-4DJETL CNMG 432-MF4 TS2500 $27594640 JET 1.0 RH CNMG 432-MF4 CP500 PCLNR-16-4DJETL CNMG 432-MF4 CP500 $27594641 JET 1.0 LH CNMG 432-MF4 CP500 PCLNL-16-4DJETL CNMG 432-MF4 CP500 $27594642 JET 1.0 RH CNMG 432-MR3 TS2000 PCLNR-16-4DJETL CNMG 432-MR3 TS2000 $27594643 JET 1.0 LH CNMG 432-MR3 TS2000 PCLNL-16-4DJETL CNMG 432-MR3 TS2000 $27594644 JET 1.0 RH CNMG 432-MR3 CP500 PCLNR-16-4DJETL CNMG 432-MR3 CP500 $27594645 JET 1.0 LH CNMG 432-MR3 CP500 PCLNL-16-4DJETL CNMG 432-MR3 CP500 $27594646 JET 1.0 RH CNMG 432-MR4 TS2500 PCLNR-16-4DJETL CNMG 432-MR4 TS2500 $27594647 JET 1.0 LH CNMG 432-MR4 TS2500 PCLNL-16-4DJETL CNMG 432-MR4 TS2500 $275

93° PDJNR/L-JETL 94648 JET 1.0 RH DNMP 431-MF1 TS2000 PDJNR-16-4DJETL DNMP 431-MF1 TS2000 $30094649 JET 1.0 LH DNMP 431-MF1 TS2000 PDJNL-16-4DJETL DNMP 431-MF1 TS2000 $30094650 JET 1.0 RH DNMP 432-MF1 TS2000 PDJNR-16-4DJETL DNMP 432-MF1 TS2000 $30094651 JET 1.0 LH DNMP 432-MF1 TS2000 PDJNL-16-4DJETL DNMP 432-MF1 TS2000 $30094652 JET 1.0 RH DNMG 432-MR3 TS2000 PDJNR-16-4DJETL DNMG 432-MR3 TS2000 $30094653 JET 1.0 LH DNMG 432-MR3 TS2000 PDJNL-16-4DJETL DNMG 432-MR3 TS2000 $30094654 JET 1.0 RH DNMG 432-MR3 CP500 PDJNR-16-4DJETL DNMG 432-MR3 CP500 $30094655 JET 1.0 LH DNMG 432-MR3 CP500 PDJNL-16-4DJETL DNMG 432-MR3 CP500 $30094656 JET 1.0 RH DNMG 432-MR4 TS2500 PDJNR-16-4DJETL DNMG 432-MR4 TS2500 $30094657 JET 1.0 LH DNMG 432-MR4 TS2500 PDJNL-16-4DJETL DNMG 432-MR4 TS2500 $300

SAVE UP TO $100

11

TURNING

GROOVING & CUT-OFFMDT• Several machining operations when using one tool• Kits available with 1” right hand shanks • LG kits offered for deep grooving and cut-off

X4• Four-edged insert for optimal cost efficiency• Robust insert design provides part accuracy• Rigid clamping provides simple loading of insert• Jetstream Tooling Duo coolant delivery provides chip control and increased

tool life

FEATURED GRADECP500 – The universal grade is an ideal first choice for many applications in all materials

Material SMG Steel SMGStainless

Steel SMGCast Iron

Vc (SFPM)P4

443M4

394K4

361f (ipr) 0.004 - 0.020 0.004 - 0.020 0.004 - 0.020

ap (doc) 0.004 - 0.125 0.008 - 0.125 0.004 - 0.125


Steel SMGCast Iron

Vc (SFPM) P4 394 M4 312 K4 344f (ipr) 0.002 - 0.012 0.002 - 0.012 0.002 - 0.012

APPLICATION DATA – STANDARD MDT

APPLICATION DATA – X4 GROOVING

MDT STANDARD AND LONG REACH (LG) TOOLHOLDERS Kit includes one 1” toolholder, ten inserts and a wrench.

X4 TOOLHOLDERS Kit includes one 1” toolholder, two inserts and a wrench.


EDP Kit Tool Insert (10 pcs.) Insert Width Price93101 MDT 1.00 RH 3MM CFIR 100 03D LCMF 3MM FT, CP500 3 mm $28593103 MDT 1.00 RH 4MM CFIR 100 04D LCMF 4MM FT, CP500 4 mm $28593110 MDT 1.00 RH 5MM CFIR 100 05D LCMF 5MM FT, CP500 5 mm $30593111 MDT 1.00 RH 6MM CFIR 100 06D LCMF 6MM FT, CP500 6 mm $30593130 MDT 1.00 RH LG 3MM CFMR 100 03D LCMR 3MM FT, CP500 3 mm $27093139 MDT 1.00 RH LG 4MM CFMR 100 04D LCMR 4MM FT, CP500 4 mm $27093140 MDT 1.00 RH LG 5MM CFMR 100 05D LCMR 5MM FT, CP500 5 mm $29093150 MDT 1.00 RH LG 6MM CFMR 100 06D LCMR 6MM FT, CP500 6 mm $290

EDP Kit Tool Insert (2 pcs.) Insert Width Price88376 X4 1.00RH.031 X4FR 1002503DJET X4GK 2503009-A0031RN-MC, CP500 0.031” $29088377 X4 1.00RH.047 X4FR 1002503DJET X4GK 2503009-A0047RN-MC, CP500 0.047” $29088378 X4 1.00RH.062 X4FR 1002503DJET X4GK 2503019-A0062RN-MC, CP500 0.062” $29088382 X4 1.00RH.072 X4FR 1002503DJET X4GK 2503019-A0072RN-MC, CP500 0.072” $29088384 X4 1.00RH.094 X4FR 1002503DJET X4GK 2503019-A0094RN-MC, CP500 0.094” $29088385 X4 1.00LH.031 X4FL 1002503DJET X4GK 2503009-A0031LN-MC, CP500 0.031” $29088393 X4 1.00LH.047 X4FL 1002503DJET X4GK 2503009-A0047LN-MC, CP500 0.047” $29088399 X4 1.00LH.062 X4FL 1002503DJET X4GK 2503019-A0062LN-MC, CP500 0.062” $29088400 X4 1.00LH.072 X4FL 1002503DJET X4GK 2503019-A0072LN-MC, CP500 0.072” $29088404 X4 1.00LH.094 X4FL 1002503DJET X4GK 2503019-A0094LN-MC, CP500 0.094” $290

SAVE UP TO $190

12

TURNING

CUT-OFFEverything you need for high performance deep grooving and cut-off in workpiece diameters up to 5.5 inches is in Seco’s 150.10 cut-off tooling kit. Each kit contains one high speed steel cut-off blade that fits in a block type* toolholder, ten high-productivity inserts with the efficient -16 chipbreaker, and, as an added bonus, an improved wrench to make insert installation and removal fast and easy.

FEATURED GRADETGP45 – Duratomic coating for high performance in steel and cast ironCP600 – The universal grade is an ideal first choice for many applications in all materials

Kit includes one toolholder, ten inserts and a wrench *Block type toolholder ordered separately Blade fits in most competitors blocks


Steel SMGCast Iron

Vc (SFPM) P4 690 M2 450 K1 500f (ipr) 0.004 - 0.006 0.004 - 0.008 0.002 - 0.004

APPLICATION DATA – TGP45

CUT-OFF KITS, TGP45


Steel SMGHigh Temp

Vc (SFPM) P4 400 M2 350 S3 130f (Ipr) 0.004 - 0.008 0.004 - 0.008 0.002 - 0.004

APPLICATION DATA – CP600

CUT-OFF KITS, CP600

Kit includes one toolholder, ten inserts and a wrench.

Kit includes one toolholder, ten inserts and a wrench.


EDP Kit Tool Insert (10 pcs.) Price27444 150.10A 3MM TGP45 1.00 150.10A-20-3 150.10 3N-16-TGP45 $20527445 150.10A 3MM TGP45 1.25 150.10A-25-3 150.10 3N-16-TGP45 $20527447 150.10A 4MM TGP45 1.00 150.10A-20-4 150.10 4N-16-TGP45 $21527448 150.10A 4MM TGP45 1.25 150.10A-25-4 150.10 4N-16-TGP45 $215

EDP Kit Tool Insert (10 pcs.) Price27450 150.10A 3MM CP600 1.00 150.10A-20-3 150.10 3N-16-CP600 $20527451 150.10A 3MM CP600 1.25 150.10A-25-3 150.10 3N-16-CP600 $20527453 150.10A 4MM CP600 1.00 150.10A-20-4 150.10 4N-16-CP600 $21527454 150.10A 4MM CP600 1.25 150.10A-25-4 150.10 4N-16-CP600 $215

SAVE UP TO $190

13

THREADING

14

TURNING

STAINLESS STEELFEATURED INSERTSeco’s “-A2” insert is the optimizing geometry for stainless steel threading, and gummy steels.

Our Snap-Tap threading kits feature the HD holder for maximum rigidity between insert atnd holder and a choice of insert geometry depending on your application. Internal kits are also available.

Thread Turning Wizard Software available on Seco website• Eliminates complicated programming• Selects the optimum holder and inserts• Identifies the best operating parameters


3/4” EXTERNAL THREADING KITS


Steel SMGCast Iron

Vc (SFPM) P4 425 M2 375 K1 350

1” EXTERNAL THREADING KITS

INTERNAL THREADING KITS

Kit includes one toolholder, two inserts and a wrench.




EDP Kit Tool Insert (2 pcs.) Price25121 THD .750 EXT APARTIAL-A2 CER 075 5-16QHD 16ERA60-A2 CP500 $15025122 THD .750 EXT AGPARTIAL-A2 CER 075 5-16QHD 16ERAG60-A2 CP500 $15025124 THD .750 EXT GPARTIAL-A2 CER 075 5-16QHD 16ERG60-A2 CP500 $15025125 THD .750 EXT 1.0ISO-A2 CER 075 5-16QHD 16ER1.0ISO-A2 CP500 $15025126 THD .750 EXT 1.25ISO-A2 CER 075 5-16QHD 16ER1.25ISO-A2 CP500 $15025127 THD .750 EXT 1.5ISO-A2 CER 075 5-16QHD 16ER1.5ISO-A2 CP500 $15025132 THD .750 EXT 1.75ISO-A2 CER 075 5-16QHD 16ER1.75ISO-A2 CP500 $15025138 THD .750 EXT 2.0ISO-A2 CER 075 5-16QHD 16ER2.0ISO-A2 CP500 $15025141 THD .750 EXT 2.5ISO-A2 CER 075 5-16QHD 16ER2.5ISO-A2 CP500 $15025144 THD .750 EXT 3.0ISO-A2 CER 075 5-16QHD 16ER3.0ISO-A2 CP500 $15025145 THD .750 EXT 20UN-A2 CER 075 5-16QHD 16ER20UN-A2 CP500 $15025146 THD .750 EXT 18UN-A2 CER 075 5-16QHD 16ER18UN-A2 CP500 $15025147 THD .750 EXT 16UN-A2 CER 075 5-16QHD 16ER16UN-A2 CP500 $15025148 THD .750 EXT 14UN-A2 CER 075 5-16QHD 16ER14UN-A2 CP500 $15025149 THD .750 EXT 12UN-A2 CER 075 5-16QHD 16ER12UN-A2 CP500 $15025151 THD .750 EXT 8UN-A2 CER 075 5-16QHD 16ER8UN-A2 CP500 $15025153 THD .750 EXT 11.5NPT-A2 CER 075 5-16QHD 16ER11.5NPT-A2 CP500 $150

EDP Kit Tool Insert (2 pcs.) Price25204 THD 1.00 EXT APARTIAL-A2 CER 100 6-16QHD 16ERA60-A2 CP500 $16025205 THD 1.00 EXT AGPARTIAL-A2 CER 100 6-16QHD 16ERAG60-A2 CP500 $16025207 THD 1.00 EXT GPARTIAL-A2 CER 100 6-16QHD 16ERG60-A2 CP500 $16025208 THD 1.00 EXT 1.0ISO-A2 CER 100 6-16QHD 16ER1.0ISO-A2 CP500 $16025210 THD 1.00 EXT 1.25ISO-A2 CER 100 6-16QHD 16ER1.25ISO-A2 CP500 $16025211 THD 1.00 EXT 1.5ISO-A2 CER 100 6-16QHD 16ER1.5ISO-A2 CP500 $16025213 THD 1.00 EXT 1.75ISO-A2 CER 100 6-16QHD 16ER1.75ISO-A2 CP500 $16025215 THD 1.00 EXT 2.0ISO-A2 CER 100 6-16QHD 16ER2.0ISO-A2 CP500 $16025216 THD 1.00 EXT 2.5ISO-A2 CER 100 6-16QHD 16ER2.5ISO-A2 CP500 $16025217 THD 1.00 EXT 3.0ISO-A2 CER 100 6-16QHD 16ER3.0ISO-A2 CP500 $16025220 THD 1.00 EXT 20UN-A2 CER 100 6-16QHD 16ER20UN-A2 CP500 $16025221 THD 1.00 EXT 18UN-A2 CER 100 6-16QHD 16ER18UN-A2 CP500 $16025223 THD 1.00 EXT 16UN-A2 CER 100 6-16QHD 16ER16UN-A2 CP500 $16025224 THD 1.00 EXT 14UN-A2 CER 100 6-16QHD 16ER14UN-A2 CP500 $16025226 THD 1.00 EXT 12UN-A2 CER 100 6-16QHD 16ER12UN-A2 CP500 $16025227 THD 1.00 EXT 8UN-A2 CER 100 6-16QHD 16ER8UN-A2 CP500 $16025228 THD 1.00 EXT 11.5NPT-A2 CER 100 6-16QHD 16ER11.5NPT-A2 CP500 $160

EDP Kit Tool Insert (2 pcs.) Price93196 THD .750 RH SNAPTAP KIT ID CNR 00075 7-16 AHD 16NR AG60 A2 CP500 $18093180 THD 1.00 RH SNAPTAP KIT ID CNR 00100 8-16 AHD 16NR AG60 A2 CP500 $20593198 THD .750 RH MINI SNAPTAP ID SNR 000750-55-09A 09NR A60 A2 CP500 $155

SAVE UP TO $65

15

TURNING

STEELFEATURED INSERTSeco’s “-A1” insert is the optimizing geometry for steel threading. Our Snap-Tap threading kits feature the HD holder for maximum rigidity between insert and holder and a choice of insert geometry depending on your application. Internal kits are also available.

FEATURED GRADECP500 – This universal grade is an ideal first choice for many applications in all materials.

Thread Turning Wizard Software available on Seco website• Eliminates complicated programming• Selects the optimum holder and inserts• Identifies the best operating parameters


3/4” EXTERNAL THREADING KITS


Steel SMGCast Iron

Vc (SFPM) P4 425 M2 375 K1 350

1” EXTERNAL THREADING KITS




EDP Kit Tool Insert (2 pcs.) Price25090 THD .750 EXTA PARTIAL-A1 CER 075 5-16QHD 16ERA60-A1 CP500 $15025094 THD .750 EXTA GPARTIAL-A1 CER 075 5-16QHD 16ERAG60-A1 CP500 $15025097 THD .750 EXT GPARTIAL-A1 CER 075 5-16QHD 16ERG60-A1 CP500 $15025098 THD .750 EXT 1.0ISO-A1 CER 075 5-16QHD 16ER1.0ISO-A1 CP500 $15025100 THD .750 EXT 1.25ISO-A1 CER 075 5-16QHD 16ER1.25ISO-A1 CP500 $15025101 THD .750 EXT 1.5ISO-A1 CER 075 5-16QHD 16ER1.5ISO-A1 CP500 $15025103 THD .750 EXT 1.75ISO-A1 CER 075 5-16QHD 16ER1.75ISO-A1 CP500 $15025105 THD .750 EXT 2.0ISO-A1 CER 075 5-16QHD 16ER2.0ISO-A1 CP500 $15025107 THD .750 EXT 2.5ISO-A1 CER 075 5-16QHD 16ER2.5ISO-A1 CP500 $15025109 THD .750 EXT 3.0ISO-A1 CER 075 5-16QHD 16ER3.0ISO-A1 CP500 $15025110 THD .750 EXT 20UN-A1 CER 075 5-16QHD 16ER20UN-A1 CP500 $15025112 THD .750 EXT 18UN-A1 CER 075 5-16QHD 16ER18UN-A1 CP500 $15025113 THD .750 EXT 16UN-A1 CER 075 5-16QHD 16ER16UN-A1 CP500 $15025115 THD .750 EXT 14UN-A1 CER 075 5-16QHD 16ER14UN-A1 CP500 $15025117 THD .750 EXT 12UN-A1 CER 075 5-16QHD 16ER12UN-A1 CP500 $15025118 THD .750 EXT 8UN-A1 CER 075 5-16QHD 16ER8UN-A1 CP500 $15025120 THD .750 EXT 11.5NPT-A1 CER 075 5-16QHD 16ER11.5NPT-A1 CP500 $150

EDP Kit Tool Insert (2 pcs.) Price25182 THD 1.00 EXT APARTIAL-A1 CER 100 6-16QHD 16ERA60-A1 CP500 $15025183 THD 1.00 EXT AGPARTIAL-A1 CER 100 6-16QHD 16ERAG60-A1 CP500 $15025184 THD 1.00 EXT GPARTIAL-A1 CER 100 6-16QHD 16ERG60-A1 CP500 $15025185 THD 1.00 EXT 1.0ISO-A1 CER 100 6-16QHD 16ER1.0ISO-A1 CP500 $15025186 THD 1.00 EXT 1.25ISO-A1 CER 100 6-16QHD 16ER1.25ISO-A1 CP500 $15025187 THD 1.00 EXT 1.5ISO-A1 CER 100 6-16QHD 16ER1.5ISO-A1 CP500 $15025192 THD 1.00 EXT 1.75ISO-A1 CER 100 6-16QHD 16ER1.75ISO-A1 CP500 $15025193 THD 1.00 EXT 2.0ISO-A1 CER 100 6-16QHD 16ER2.0ISO-A1 CP500 $15025194 THD 1.00 EXT 2.5ISO-A1 CER 100 6-16QHD 16ER2.5ISO-A1 CP500 $15025195 THD 1.00 EXT 3.0ISO-A1 CER 100 6-16QHD 16ER3.0ISO-A1 CP500 $15025197 THD 1.00 EXT 20UN-A1 CER 100 6-16QHD 16ER20UN-A1 CP500 $15025198 THD 1.00 EXT 18UN-A1 CER 100 6-16QHD 16ER18UN-A1 CP500 $15025199 THD 1.00 EXT 16UN-A1 CER 100 6-16QHD 16ER16UN-A1 CP500 $15025200 THD 1.00 EXT 14UN-A1 CER 100 6-16QHD 16ER14UN-A1 CP500 $15025201 THD 1.00 EXT 12UN-A1 CER 100 6-16QHD 16ER12UN-A1 CP500 $15025202 THD 1.00 EXT 8UN-A1 CER 100 6-16QHD 16ER8UN-A1 CP500 $15025203 THD 1.00 EXT 11.5NPT-A1 CER 100 6-16QHD 16ER11.5NPT-A1 CP500 $150

SAVE UP TO $65

16

MILLING

17

MILLING TECHNICAL DATAThe following pages feature a popular selection of milling products grouped into kits that will work in many applications and materials. First, here are some technical details.

For our full product range, see our Milling Machining Navigator

MP2500 Duratomic®

CVD-coated grade featuring DuratomicTM coating. Basic grade for milling steel and easy/medium difficult stainless steel, with or without coolant.

F40MPVD-coated grade for fine to medium rough milling. First choice for milling with small feeds and/or low cutting speeds. Excellent for milling when there is a risk of vibrations and when coolant is used. Recommended for machining superalloys.

BASIC GRADES AVAILABLE IN KITS

MP1500 Duratomic®

CVD Grade for medium rough milling under stable conditions at high cutting speeds and for milling hardened steel. Excellent grade for roughing grey and nodular cast iron.

MK2050CVD Grade for cast iron machining. Highly wear resistant grade used in all cast iron applications. The nanolaminate coating has very high wear resistance properties and edge integrity.

MS2500Optimized PVD grade for super alloy materials, also suitable for rough milling in tool steel.

MS2050PVD coated grade developed for Titanium and Titanium Alloys. The coating is developed to aid in the reduction of built up edge on the insert which extends tool life 2 to 3 times longer.

OPTIMIZED GRADES

RPMvc · 12 · Dc

n = (rev/min)

Cutting speedn · · Dc

12vc = (ft/min)

Feed speed

n · zn · fzvf = (inch/min)

n · zc · fzvf = (inch/min)

Difficult machining conditions, strong insert cutting edge.

Easy machiningconditions, sharp insert cutting edge.

D = Difficult

M = Medium

E = Easy

Increasing chip thickness/feed rate

FORMULAE

AVERAGE CHIP THICKNESSAverage chip thickness should be consi-dered when less that 50% of the cutter is engaged. Please refer to the Machining Navigator for further information.

DESIGNATION SYSTEMThe Seco designation system for milling inserts has been developed to provide the user with better guidance concerning the fields of application for the various insert geometries.

See Milling Machining Navigator for these grade options and more.

18

SQUARE SHOULDER MILLING

SQUARE T4 -08Square T4-08 is a square shoulder mill with a tangentially mounted insert offering 4 cutting edges on a 90° square shoulder mill, designed with positive rake insert geometries to reduce heat and cutting pressure. Smaller diameter tools can handle larger depth of cut because the tangentially mounted insert. The cutter bodies core diameter is large compared to conventionally mounted insert tools and can handle a depth of cut up to .315” while profiling. This is an ideal solution to multiple cutting edges on small diameter tools.

FEATURED GRADES MP2500 – First choice for steel and stainless steel machining applications, offering combined toughness and wear resistance. F40M – PVD coated grade ideal for machining both steel and stainless steel.


SMG No.

Steel - MP2500

SMG No.

Stainless - F40MFeed fz (IPT) Feed fz (IPT)

100% 30% 10% 100% 30% 10%Cutting speed Vc (SFPM) Cutting speed Vc (SFPM)

0.0044 0.005 0.0075 0.004 0.0045 0.007P1 1050 1375 1625 M1 610 810 960P2 1000 1325 1575 M2 510 660 790P3 880 1150 1375 M3 415 540 640P4 780 1025 1200 – – – –P5 740 970 1150 – – – –P6 850 1125 1300 – – – –P7 810 1050 1250 – – – –P8 740 970 1150 – – – –P11 780 1025 1200 – – – –

APPLICATION DATA

Kit includes one cutter body, ten inserts and a wrench.

SQUARE T4-08 KITS MAX D.O.C. 0.315”

EDP Kit Description

Kit Contents

PriceCutter Dia. Bore Shank Insert (10 pcs.)

P

11654 SQUARET4-08 00.75P KIT R217.94-00.75-3-08-2A 0.750 - 0.750 LOEX080408TR-M08 MP2500 $41511655 SQUARET4-08 01.00P KIT R217.94-01.00-3-08-3A 1.000 - 1.000 LOEX080408TR-M08 MP2500 $44011656 SQUARET4-08 01.25P KIT R217.94-01.25-3-08-4A 1.250 - 1.250 LOEX080408TR-M08 MP2500 $46011657 SQUARET4-08 01.50P KIT R220.94-01.50-08-4A 1.500 0.750 - LOEX080408TR-M08 MP2500 $51011662 SQUARET4-08 02.00P KIT R220.94-02.00-08-5A 2.000 0.750 - LOEX080408TR-M08 MP2500 $565

M

11664 SQUARET4-08 00.75M KIT R217.94-00.75-3-08-2A 0.750 - 0.750 LOEX 080408TR-M08 F40M $41511667 SQUARET4-08 01.00M KIT R217.94-01.00-3-08-3A 1.000 - 1.000 LOEX 080408TR-M08 F40M $44011668 SQUARET4-08 01.25M KIT R217.94-01.25-3-08-4A 1.250 - 1.250 LOEX 080408TR-M08 F40M $46011670 SQUARET4-08 01.50M KIT R220.94-01.50-08-4A 1.500 0.750 - LOEX 080408TR-M08 F40M $51011671 SQUARET4-08 02.00M KIT R220.94-02.00-08-5A 2.000 0.750 - LOEX 080408TR-M08 F40M $565

SAVE UP TO $265

% = Cutter dia

19



SQUARE 6™ -04Square 6-04 is the smaller version of the best multiple edge square shoulder mill on the market! The Sq6-04 utilizes a trigon shaped insert, giving 6 cutting edges on a 90° square shoulder mill, but was engineered with modern cutting geometries to reduce heat and cutting pressure allowing it to be fully utilized on today’s high tech machine tools. The diameter range starts at 0.75” with a max DOC of 0.157”, making Sq6-04 a perfect replacement for those larger diameter high cost solid carbide end mills.


SQUARE 6-04

Cutting edge length 0.157”

Strong, highly positive geometry 0.129” thick

SMG

Steel - MP2500

SMG



0.0043 0.0047 0.007 0.0027 0.003 0.0046P1 1025 1325 1575 M1 590 790 940P2 970 1300 1525 M2 490 650 770P3 860 1125 1325 M3 405 530 620P4 760 1000 1175 M4 315 410 480P5 720 950 1125 M5 260 340 400P6 830 1100 1275 – – – –P7 780 1025 1200 – – – –P8 720 950 1125 – – – –P11 760 1000 1175 – – – –

APPLICATION DATA


SQUARE 6 R217/220.96-04 KITS MAX D.O.C. 0.157”

EDP Kit Description

Kit Contents


P

08843 SQUARE 6-04 0.75P KIT R217.96-00.750-3-04-3A 0.750 - 0.750 XNEX 040308TR-M08 MP2500 $405 08844 SQUARE 6-04 1.00P KIT R217.96-01.00-3-04-5A 1.000 - 1.000 XNEX 040308TR-M08 MP2500 $45508845 SQUARE 6-04 1.25P KIT R217.96-01.25-3-04-6A 1.250 - 1.250 XNEX 040308TR-M08 MP2500 $46008846 SQUARE 6-04 1.50P KIT R220.96-01.50-04-6A 1.500 0.750 - XNEX 040308TR-M08 MP2500 $52008847 SQUARE 6-04 2.00P KIT R220.96-02.00-04-8A 2.000 0.750 - XNEX 040308TR-M08 MP2500 $585

M

08849 SQUARE 6-04 0.75M KIT R217.96-00.750-3-04-3A 0.750 - 0.750 XNEX 040308R-M06 F40M $40508851 SQUARE 6-04 1.00M KIT R217.96-01.00-3-04-5A 1.000 - 1.000 XNEX 040308R-M06 F40M $45508852 SQUARE 6-04 1.25M KIT R217.96-01.25-3-04-6A 1.250 - 1.250 XNEX 040308R-M06 F40M $46008853 SQUARE 6-04 1.50M KIT R220.96-01.50-04-6A 1.500 0.750 - XNEX 040308R-M06 F40M $52008854 SQUARE 6-04 2.00M KIT R220.96-02.00-04-8A 2.000 0.750 - XNEX 040308R-M06 F40M $585

SAVE UP TO $255

% = Cutter dia

20


SQUARE 6™ -08With six cutting edges, Square 6 is a cost effective tool for square shoulder milling, face milling and plunging. True 90° walls can be achieved the first pass, in one milling operation, and results in a high quality surface finish.



SQUARE 6 R217/220.96-08 KITS MAX D.O.C. 0.295”

SQUARE 6-08

Cutting edge length 0.295”Strong, highly positive geometry 0.25” thick


SMG

Steel - MP2500

SMG



0.0063 0.0071 0.0108 0.0038 0.0041 0.0061P1 1000 1325 1550 M1 600 790 930P2 980 1300 1525 M2 495 650 770P3 860 1125 1350 M3 400 530 620P4 760 1000 1175 M4 310 410 480P5 730 960 1125 M5 260 340 400P6 810 1075 1275 – – – –P7 770 1025 1200 – – – –P8 730 940 1125 – – – –P11 750 990 1150 – – – –

APPLICATION DATA

EDP Kit Description

Kit Contents


P

54225 SQUARE6-08 1.5P KIT R217.96-01.50-3-08-3A 1.500 - 1.250 XNEX 080608TR-M13 MP2500 $48054227 SQUARE6-08 2.0P KIT R220.96-02.00-08-5A 2.000 0.750 - XNEX 080608TR-M13 MP2500 $56054229 SQUARE6-08 2.5P KIT R220.96-02.50-08-6A 2.500 0.750 - XNEX 080608TR-M13 MP2500 $63054230 SQUARE6-08 3.0P KIT R220.96-03.00-08-7A 3.000 1.000 - XNEX 080608TR-M13 MP2500 $70554234 SQUARE6-08 4.0P KIT R220.96-04.00-08-8A 4.000 1.000 - XNEX 080608TR-M13 MP2500 $785

M

54235 SQUARE6-08 1.5M KIT R217.96-01.50-3-08-3A 1.500 - 1.250 XNEX 080608R-M08 F40M $48054236 SQUARE6-08 2.0M KIT R220.96-02.00-08-5A 2.000 0.750 - XNEX 080608R-M08 F40M $56054239 SQUARE6-08 2.5M KIT R220.96-02.50-08-6A 2.500 0.750 - XNEX 080608R-M08 F40M $63054241 SQUARE6-08 3.0M KIT R220.96-03.00-08-7A 3.000 1.000 - XNEX 080608R-M08 F40M $70554242 SQUARE6-08 4.0M KIT R220.96-04.00-08-8A 4.000 1.000 - XNEX 080608R-M08 F40M $785

SAVE UP TO $375

% = Cutter dia

21



TURBO 6For small diameter square-shoulder milling, Turbo 6 has no equal. 6 mm inserts in cutter bodies as small as 3/8” diameter provide great performance and an economical alternative to HSS and solid carbide.

FEATURED GRADEF40M – PVD coated grade ideal for machining both steel and stainless steel.


TURBO 6 R220.69-06 KITS MAX PROFILING D.O.C. 0.197”

EDP Kit Description

Kit Contents

PriceCutter Dia. Shank Insert (10 pcs.)

P

23517 TURBO 6 .375P KIT R217.69-00.375-0-06-2AN 0.750 0.375 XOMX060208R-M05 F40M $30023518 TURBO 6 .500P KIT R217.69-00.500-0-06-3AN 0.500 0.500 XOMX060208R-M05 F40M $315 23519 TURBO 6 .625P KIT R217.69-00.625-0-06-4AN 0.625 0.625 XOMX060208R-M05 F40M $33023520 TURBO 6 .750P KIT R217.69-00.750-0-06-5AN 0.750 0.750 XOMX060208R-M05 F40M $355

M

23517 TURBO 6 .375M KIT R217.69-00.375-0-06-2AN 0.750 0.375 XOMX060208R-M05 F40M $300 23518 TURBO 6 .500M KIT R217.69-00.500-0-06-3AN 0.500 0.500 XOMX060208R-M05 F40M $31523519 TURBO 6 .625M KIT R217.69-00.625-0-06-4AN 0.625 0.625 XOMX060208R-M05 F40M $33023520 TURBO 6 .750M KIT R217.69-00.750-0-06-5AN 0.750 0.750 XOMX060208R-M05 F40M $355

SMG

Steel - MP2500

SMG



0.0027 0.003 0.0045 0.0023 0.0025 0.0038P1 910 1200 1400 M1 710 930 1100P2 890 1150 1350 M2 590 770 900P3 760 1000 1200 M3 465 610 710P4 680 880 1050 M4 365 480 550P5 650 850 1000 M5 305 400 460P6 730 960 1125 – – – –P7 690 910 1050 – – – –P8 640 840 1000 – – – –P11 670 880 1025 – – – –

APPLICATION DATA

SAVE UP TO $190

% = Cutter dia

22


TURBO 10For light duty, high precision applications, Turbo 10 is the answer. The free cutting, low power consumption design makes Turbo 10 ideal for smaller machines as well as long overhangs and challenging machine setups that may lack stability.

FEATURED GRADESMP2500 – MP2500 inserts for Turbo 10 with the M09 edge preparation is the ideal combination for steel milling.F40M – PVD coated grade ideal for machining both steel and stainless steel. The M06 edge preparation is the first choice for stainless steel machining. MS2050 – PVD coated grade developed for Titanium and Titanium Alloys. The M06 edge preparation is the first choice for Super Alloy machining.



EDP Kit Description

Kit Contents


P

15429 TURBO 10 .625P KIT R217.69-00.625-3-10-2A 0.625 - 0.625 XOMX10T308TR-M09 MP2500 $35515430 TURBO 10 .750P KIT R217.69-00.750-3-10-2A 0.750 - 0.750 XOMX10T308TR-M09 MP2500 $36515431 TURBO 10 1.00P KIT R217.69-01.00-3-10-4A 1.000 - 1.000 XOMX10T308TR-M09 MP2500 $39515432 TURBO 10 1.25P KIT R217.69-01.25-3-10-5A 1.250 - 1.250 XOMX10T308TR-M09 MP2500 $39515433 TURBO 10 1.50P KIT R220.69-01.50-10-6A 1.500 0.750 - XOMX10T308TR-M09 MP2500 $425

M

15434 TURBO 10 .625M KIT R217.69-00.625-3-10-2A 0.625 - 0.625 XOEX10T308R-M06 F40M $36515436 TURBO 10 .750M KIT R217.69-00.750-3-10-2A 0.750 - 0.750 XOEX10T308R-M06 F40M $37515437 TURBO 10 1.00M KIT R217.69-01.00-3-10-4A 1.000 - 1.000 XOEX10T308R-M06 F40M $40515438 TURBO 10 1.25M KIT R217.69-01.25-3-10-5A 1.250 - 1.250 XOEX10T308R-M06 F40M $40515440 TURBO 10 1.50M KIT R220.69-01.50-10-6A 1.500 0.750 - XOEX10T308R-M06 F40M $435

S

52065 TURBO 10 .625T KIT R217.69-00.625-3-10-2A 0.625 - 0.625 XOEX 10T308R-M06 MS2050 $37556258 TURBO 10 .750T KIT R217.69-00.750-3-10-2A 0.750 - 0.750 XOEX 10T308R-M06 MS2050 $38556259 TURBO 10 1.00T KIT R217.69-01.00-3-10-4A 1.000 - 1.000 XOEX 10T308R-M06 MS2050 $41556262 TURBO 10 1.25T KIT R217.69-01.25-3-10-5A 1.250 - 1.250 XOEX 10T308R-M06 MS2050 $41556263 TURBO 10 1.50T KIT R220.69-01.50-10-6A 1.500 0.750 - XOEX 10T308R-M06 MS2050 $445

APPLICATION DATA

SAVE UP TO $285

SMG

MP2500

SMG

F40M

SMG

MS2050Feed fz (IPT) Feed fz (IPT) Feed fz (IPT)

100% 30% 10% 100% 30% 10% 100% 30%Cutting speed Vc (SFPM) Cutting speed Vc (SFPM) Cutting speed Vc (SFPM)

0.0047 0.0049 0.0077 0.0027 0.003 0.0046 0.0023 0.0025P1 1100 1425 1675 M1 630 840 1000 S1 190 230P2 1025 1375 1625 M2 520 700 820 S2 155 185P3 910 1200 1425 M3 430 560 660 S3 135 165P4 800 1050 1250 M4 335 440 510 S11 255 320P5 770 1025 1200 M5 280 370 425 S12 200 245P6 880 1150 1350 – – – – S13 165 200P7 830 1100 1275 – – – – – – –P8 770 1000 1200 – – – – – – –

P11 810 1075 1250 – – – – – – –% = Cutter dia


23


TURBO 12The number one first choice cutter for general-purpose square-shoulder milling applications. Using hardened cutter bodies and 12 mm highly-positive inserts, Turbo 12 makes short work of a wide range of materials and applications.

FEATURED GRADESMP2500 – Super Turbo inserts in MP2500 with the M12 edge preparation are well-suited for steel milling. F40M – PVD coated grade ideal for machining both steel and stainless steel. The M07 edge preparation is the first choice for stainless steel machining. MS2050 – PVD coated grade developed for Titanium and Titanium Alloys. The M07 edge preparation is the first choice for Super Alloy machining. FEATURING ORIGINAL

DURATOMIC® TECHNOLOGY!



EDP Kit Description

Kit Contents


P

40924 TURBO 12 .750P KIT R217.69-00.750-3-12-2AN 0.750 - 0.750 XOMX120408TR-M12 MP2500 $38040927 TURBO 12 1.00P KIT R217.69-01.00-3-12-3AN 1.000 - 1.000 XOMX120408TR-M12 MP2500 $40040930 TURBO 12 1.25P KIT R217.69-01.25-3-12-4AN 1.250 - 1.250 XOMX120408TR-M12 MP2500 $41056264 TURBO 12 1.50P KIT R220.69-01.50-12-4AN 1.500 - 1.500 XOMX120408TR-M12 MP2500 $48056265 TURBO 12 2.00P KIT R220.69-02.00-12-5AN 2.000 0.750 - XOMX120408TR-M12 MP2500 $560

M

40925 TURBO 12 .750M KIT R217.69-00.750-3-12-2AN 0.750 - 0.750 XOEX120408R-M07 F40M $39040928 TURBO 12 1.00M KIT R217.69-01.00-3-12-3AN 1.000 - 1.000 XOEX120408R-M07 F40M $41040931 TURBO 12 1.25M KIT R217.69-01.25-3-12-4AN 1.250 - 1.250 XOEX120408R-M07 F40M $42056267 TURBO 12 1.50M KIT R220.69-01.50-12-4AN 1.500 - 1.500 XOEX120408R-M07 F40M $49056268 TURBO 12 2.00M KIT R220.69-02.00-12-5AN 2.000 0.750 - XOEX120408R-M07 F40M $570

T

56269 TURBO 12 .750T KIT R217.69-00.750-3-12-2AN 0.750 - 0.750 XOEX 120408R-M07 MS2050 $40056273 TURBO 12 1.00T KIT R217.69-01.00-3-12-3AN 1.000 - 1.000 XOEX 120408R-M07 MS2050 $42056274 TURBO 12 1.25T KIT R217.69-01.25-3-12-4AN 1.250 - 1.250 XOEX 120408R-M07 MS2050 $43056278 TURBO 12 1.50T KIT R220.69-01.50-12-4AN 1.500 - 1.500 XOEX 120408R-M07 MS2050 $50056279 TURBO 12 2.00T KIT R220.69-02.00-12-5AN 2.000 0.750 - XOEX 120408R-M07 MS2050 $580

APPLICATION DATA

SMG

MP2500

SMG

F40M

SMG




P11 730 960 1125 – – – – – – –

SAVE UP TO $250

% = Cutter dia

24


TURBO 18Turbo 18 provides the highest metal-removal rate, yet with its super-positive inserts, makes very good use of machine horsepower, even in demanding applications and difficult materials.

FEATURED GRADESMP2500 – Inserts for Turbo 18 in MP2500 with the M14 edge preparation perform extremely well in steel. F40M – PVD coated grade ideal for machining both steel and stainless steel. The M10 edge preparation is the first choice for stainless steel machining. MS2050 – PVD coated grade developed for Titanium and Titanium Alloys. The M10 edge preparation is the first choice for Super Alloy machining.FEATURING ORIGINAL



TURBO 18 R217/220.69-18 KITS MAX PROFILING D.O.C. 0.669”

EDP Kit Description

Kit Contents


P

70512 TURBO 18 1.00P KIT R217.69-01.00-3-18-2AN 1.000 - 1.000 XOMX 180608TR-M14 MP2500 $43040939 TURBO 18 1.25P KIT R217.69-01.25-3-18-3AN 1.250 - 1.250 XOMX 180608TR-M14 MP2500 $44040942 TURBO 18 1.50P KIT R217.69-01.50-3-18-4AN 1.500 - 1.500 XOMX 180608TR-M14 MP2500 $47040949 TURBO 18 2.00P KIT R220.69-02.00-18-4AN 2.000 0.750 XOMX 180608TR-M14 MP2500 $555

M

70513 TURBO 18 1.00M KIT R217.69-01.00-3-18-2AN 1.000 - 1.000 XOMX180608R-M10 F40M $43040940 TURBO 18 1.25M KIT R217.69-01.25-3-18-3AN 1.250 - 1.250 XOMX180608R-M10 F40M $44040945 TURBO 18 1.50M KIT R217.69-01.50-3-18-4AN 1.500 - 1.500 XOMX180608R-M10 F40M $47040950 TURBO 18 2.00M KIT R220.69-02.00-18-4AN 2.000 0.750 XOMX180608R-M10 F40M $555

T

56295 TURBO 18 1.00T KIT R217.69-01.00-3-18-2AN 1.000 - 1.000 XOMX 180608R-M10 MS2050 $44056296 TURBO 18 1.25T KIT R217.69-01.25-3-18-3AN 1.250 - 1.250 XOMX 180608R-M10 MS2050 $45056297 TURBO 18 1.50T KIT R217.69-01.50-3-18-4AN 1.500 - 1.500 XOMX 180608R-M10 MS2050 $48056298 TURBO 18 2.00T KIT R220.69-02.00-18-4AN 2.000 0.750 XOMX 180608R-M10 MS2050 $565

APPLICATION DATA

SMG

MP2500

SMG

F40M

SMG




P11 690 920 1075 – – – – – – –

SAVE UP TO $270

% = Cutter dia

25

FACE MILLING

LN14This new line of R220.LN14 square shoulder mills is a solution designed to address specific machining needs within the North American market. The negative style inserts provide four thick cutting edges giving the added toughness needed in difficult materials, long reach applications and less stable set-ups. It is also extremely free cutting because it incorporates the same geometry design technology as the highly successful Square 6.

FEATURED GRADES MP2500 – First choice for steel machining applications, offering combined toughness and wear resistance. 150600 – PVD coated grade ideal for machining both steel and stainless steel. This grade is very close to and resembles F40M

APPLICATION DATA - LN14

LN14 MAX D.O.C. 0.118”


EDP Kit Description

Kit Contents

PriceCutter Dia. Bore Insert (10 pcs.)

P 56327 LN14 2.00P KIT R220.LN14-02.00-14-4A 2.00 0.75 LN140708TR-M07 MP2500 $560 56330 LN14 2.50P KIT R220.LN14-02.50-14-6A 2.50 0.75 LN140708TR-M07 MP2500 $630 56331 LN14 3.00P KIT R220.LN14-03.00-14-7A 3.00 1.00 LN140708TR-M07 MP2500 $700

M 56335 LN14 2.00M KIT R220.LN14-02.00-14-4A 2.00 0.75 LN140708TR-M07 150600 $560 56336 LN14 2.50M KIT R220.LN14-02.50-14-6A 2.50 0.75 LN140708TR-M07 150600 $630 56337 LN14 3.00M KIT R220.LN14-03.00-14-7A 3.00 1.00 LN140708TR-M07 150600 $700

SMG

Steel - MP2500

SMG

Stainless - 150600Feed fz (IPT) Feed fz (IPT)


0.0065 0.007 0.011 0.0036 0.004 0.0062P1 1000 1330 1560 M1 600 795 935P2 970 1295 1525 M2 490 655 765P3 855 1115 1345 M3 405 530 610P4 755 1000 1180 M4 305 405 475P5 720 950 1130 M5 225 300 360P6 805 1065 1265 – – – –P7 755 1015 1195 – – – –P8 720 935 1130 – – – –P11 740 985 1165 – – – –

SAVE UP TO $310

% = Cutter dia

26

FACE MILLING

DOUBLE OCTOMILL™ -05Double Octomill -05 with 16 cutting edges and a maximum D.O.C. of 0.118” features 65Rc HSS pins mounted in the radial and axial walls of the pocket seat for easy indexing and accurate location. It is an economical face mill for smaller machines or near net shape components. A wide array of grades, geometries and cutter pitches are available to optimize almost any application. Ask your Seco distributor for details.

FEATURED GRADES MP2500 – First choice for steel machining applications, offering combined toughness and wear resistance. F40M – PVD coated grade ideal for machining both steel and stainless steel.FEATURING ORIGINAL


APPLICATION DATA - DOUBLE OCTOMILL R217/220.48-05

DOUBLE OCTOMILL R220.48-05 KITS MAX D.O.C. 0.118”


EDP Kit Description

Kit Contents


P

56299 DBLEOCTO-05 1.50P KIT R220.48-01.50-05-04SA 1.50 0.50 ONMU 050410ANTN-M11 MP2500 $620 79460 DBLEOCTO-05 2.00P KIT R220.48-02.00-05-04SA 2.00 0.75 ONMU 050410ANTN-M11 MP2500 $670 79461 DBLEOCTO-05 2.50P KIT R220.48-02.50-05-05SA 2.50 0.75 ONMU 050410ANTN-M11 MP2500 $760 79462 DBLEOCTO-05 3.00P KIT R220.48-03.00-05-06SA 3.00 1.00 ONMU 050410ANTN-M11 MP2500 $820

M

56303 DBLEOCTO-05 1.50M KIT R220.48-01.50-05-04SA 1.50 0.50 ONMU 050410ANTN-M10 F40M $620 79465 DBLEOCTO-05 2.00M KIT R220.48-02.00-05-04SA 2.00 0.75 ONMU 050410ANTN-M10 F40M $670 79466 DBLEOCTO-05 2.50M KIT R220.48-02.50-05-05SA 2.50 0.75 ONMU 050410ANTN-M10 F40M $760 79467 DBLEOCTO-05 3.00M KIT R220.48-03.00-05-06SA 3.00 1.00 ONMU 050410ANTN-M10 F40M $820

SMG

Steel - MP2500

SMG



0.0082 0.0087 0.0135 0.0058 0.0074 0.0116P1 920 1225 1475 M1 550 730 860P2 900 1200 1400 M2 455 610 720P3 770 1050 1225 M3 365 485 580P4 700 930 1100 M4 285 380 450P5 670 890 1050 M5 235 315 375P6 750 1000 1175 – – – –P7 710 940 1125 – – – –P8 650 890 1025 – – – –P11 690 920 1075 – – – –

SAVE UP TO $260

% = Cutter dia

27

FACE MILLING

DOUBLE OCTOMILL™ -09Double Octomill -09 inserts feature 16 cutting edges, the most edges of any insert designed for a fixed pocket indexable face mill on the market! The cutter features 65Rc HSS pins mounted in the radial and axial walls of the pocket seat for easy indexing and accurate location. The Double Octomill -09 can take up to .236 depth of cut.

FEATURED GRADES MP2500 – First choice for steel machining applications, offering combined toughness and wear resistance. F40M – PVD coated grade ideal for machining both steel and stainless steel.


APPLICATION DATA - DOUBLE OCTOMILL R220.48-09


DOUBLE OCTOMILL R220.48-09 KITS MAX D.O.C. 0.236”

EDP Kit Description

Kit Contents


P

68496 DBLEOCTO-09 2.50P KIT R220.48-02.50-09-05SA 2.50 0.75 ONMU 090520ANTN-M15 MP2500 $710 41182 DBLEOCTO-09 3.00P KIT R220.48-03.00-09-06SA 3.00 1.00 ONMU 090520ANTN-M15 MP2500 $810 41183 DBLEOCTO-09 4.00P KIT R220.48-04.00-09-07SA 4.00 1.50 ONMU 090520ANTN-M15 MP2500 $935 41185 DBLEOCTO-09 5.00P KIT R220.48-05.00-09-08SA 5.00 1.50 ONMU 090520ANTN-M15 MP2500 $1,145 41188 DBLEOCTO-09 6.00P KIT R220.48-06.00-09-10S 6.00 2.00 ONMU 090520ANTN-M15 MP2500 $1,410

M

68497 DBLEOCTO-09 2.50M KIT R220.48-02.50-09-05SA 2.50 0.75 ONMU 090520ANTN-M13 F40M $710 41194 DBLEOCTO-09 3.00M KIT R220.48-03.00-09-06SA 3.00 1.00 ONMU 090520ANTN-M13 F40M $810 41195 DBLEOCTO-09 4.00M KIT R220.48-04.00-09-07SA 4.00 1.50 ONMU 090520ANTN-M13 F40M $935 41199 DBLEOCTO-09 5.00M KIT R220.48-05.00-09-08SA 5.00 1.50 ONMU 090520ANTN-M13 F40M $1,145 41200 DBLEOCTO-09 6.00M KIT R220.48-06.00-09-10S 6.00 2.00 ONMU 090520ANTN-M13 F40M $1,410

SMG

Steel - MP2500

SMG



0.0097 0.0106 0.0165 0.008 0.0091 0.0136P1 810 1100 1325 M1 465 640 760P2 770 1075 1275 M2 390 520 630P3 680 930 1100 M3 320 430 510P4 610 820 980 M4 245 325 395P5 580 800 940 M5 205 275 330P6 660 900 1050 – – – –P7 620 850 990 – – – –P8 570 780 930 – – – –P11 600 820 960 – – – –

SAVE UP TO $600

% = Cutter dia

28

APPLICATION DATA – QUATTROMILL -09

FACE MILLING

QUATTROMILL™ -09The QuattroMill-09 is ideal for precision machining on light duty machines. All QuattroMill cutter bodies are coated for longer tool life, and the inserts are square, adding strength and making them easy to index.

FEATURED GRADES MP2500 – First choice for steel and stainless steel machining applications, offering combined toughness and wear resistance. F40M – PVD coated grade ideal for machining both steel and stainless steel. MS2050 – PVD coated grade developed for Titanium and Titanium Alloys.


QUATTROMILL R217/220.53-09 KITS MAX D.O.C. 0.18”


EDP Kit Description

Kit Contents


P

41018 QUATTRO-09 1.50P KIT R220.53-01.50-09-4A 1.50 0.75 SEMX 09T3AFTN-M08 MP2500 $41041019 QUATTRO-09 2.00P KIT R220.53-02.00-09-5A 2.00 0.75 SEMX 09T3AFTN-M08 MP2500 $47041020 QUATTRO-09 2.50P KIT R220.53-02.50-09-6A 2.50 0.75 SEMX 09T3AFTN-M08 MP2500 $55541021 QUATTRO-09 3.00P KIT R220.53-03.00-09-6A 3.00 1.00 SEMX 09T3AFTN-M08 MP2500 $580

M

41023 QUATTRO-09 1.50M KIT R220.53-01.50-09-4A 1.50 0.75 SEEX 09T3AFN-M05 F40M $43041024 QUATTRO-09 2.00M KIT R220.53-02.00-09-5A 2.00 0.75 SEEX 09T3AFN-M05 F40M $49041025 QUATTRO-09 2.50M KIT R220.53-02.50-09-6A 2.50 0.75 SEEX 09T3AFN-M05 F40M $57541026 QUATTRO-09 3.00M KIT R220.53-03.00-09-6A 3.00 1.00 SEEX 09T3AFN-M05 F40M $600

T

56304 QUATTRO-09 1.50T KIT R220.53-01.50-09-4A 1.50 0.75 SEEX 09T3AFN-M05 MS2050 $44056305 QUATTRO-09 2.00T KIT R220.53-02.00-09-5A 2.00 0.75 SEEX 09T3AFN-M05 MS2050 $50056306 QUATTRO-09 2.50T KIT R220.53-02.50-09-6A 2.50 0.75 SEEX 09T3AFN-M05 MS2050 $58556307 QUATTRO-09 3.00T KIT R220.53-03.00-09-6A 3.00 1.00 SEEX 09T3AFN-M05 MS2050 $610

SMG

MP2500

SMG

F40M

SMG




P11 740 1000 1175 – – – – – – –

SAVE UP TO $290

% = Cutter dia

29

FACE MILLING

QUATTROMILL™ -12The universal QuattroMill-12 is a workhorse in general purpose machining. QuattroMill facemills feature a super-positive geometry to cut freely in all materials.

FEATURED GRADESMP2500 – First choice for steel and stainless steel machining applications, offering combined toughness and wear resistance.F40M – PVD coated grade ideal for machining both steel and stainless steel.MS2050 – PVD coated grade developed for Titanium and Titanium Alloys.

APPLICATION DATA – QUATTROMILL -12


QUATTROMILL R220.53-12 KITS MAX D.O.C. 0.236”


EDP Kit Description

Kit Contents


P

41133 QUATTRO-12 2.00P KIT R220.53-02.00-12-4A 2.00 0.75 SEMX1204AFTN-M15 MP2500 $47541136 QUATTRO-12 2.50P KIT R220.53-02.50-12-5A 2.50 0.75 SEMX1204AFTN-M15 MP2500 $55041137 QUATTRO-12 3.00P KIT R220.53-03.00-12-6A 3.00 1.00 SEMX1204AFTN-M15 MP2500 $62541138 QUATTRO-12 4.00P KIT R220.53-04.00-12-7A 4.00 1.00 SEMX1204AFTN-M15 MP2500 $700

M

41151 QUATTRO-12 2.00M KIT R220.53-02.00-12-4A 2.00 0.75 SEEX1204AFN-M08 F40M $51041153 QUATTRO-12 2.50M KIT R220.53-02.50-12-5A 2.50 0.75 SEEX1204AFN-M08 F40M $58541154 QUATTRO-12 3.00M KIT R220.53-03.00-12-6A 3.00 1.00 SEEX1204AFN-M08 F40M $66041155 QUATTRO-12 4.00M KIT R220.53-04.00-12-7A 4.00 1.00 SEEX1204AFN-M08 F40M $735

T

56308 QUATTRO-12 2.00T KIT R220.53-02.00-12-4A 2.00 0.75 SEEX 1204AFN-M10 MS2050 $52056310 QUATTRO-12 2.50T KIT R220.53-02.50-12-5A 2.50 0.75 SEEX 1204AFN-M10 MS2050 $59556311 QUATTRO-12 3.00T KIT R220.53-03.00-12-6A 3.00 1.00 SEEX 1204AFN-M10 MS2050 $67056312 QUATTRO-12 4.00T KIT R220.53-04.00-12-7A 4.00 1.00 SEEX 1204AFN-M10 MS2050 $745

SMG

MP2500

SMG

F40M

SMG


100% 30% 10% 100% 30% 10% 100% 30% 10%Cutting speed Vc (SFPM) Cutting speed Vc (SFPM) Cutting speed Vc (SFPM)

0.0112 0.0124 0.0187 0.0066 0.0073 0.011 0.0055 0.006 0.0091P1 870 1175 1400 M1 520 690 830 S1 158 198 228P2 850 1125 1375 M2 425 580 690 S2 125 158 185P3 740 990 1200 M3 350 470 570 S3 113 143 165P4 650 890 1050 M4 275 360 440 S11 210 273 315P5 630 850 1025 M5 225 300 365 S12 160 210 243P6 700 960 1125 – – – – S13 135 170 198P7 660 900 1075 – – – – – – – –P8 630 840 1000 – – – – – – – –

P11 640 880 1050 – – – – – – – –

SAVE UP TO $360

% = Cutter dia

30

COPY MILLING

HIGH FEED 2Seco High Feed cutters provide very rapid metal removal by effectively thinning the chip with low depth of cut /high feed technology. Ideal for roughing out pockets and enclosed cavities. The Highfeed 2 has an optimized geometry for improved performance and productivity. The 2” kit offers a shell mill style cutter that utilizes the 218.19 insert geometry. This combination is the workhorse of larger diameter high feed mills.

FEATURED GRADESMP2500 – High feed MP2500 inserts with the MD07 or MD11 edge treatment are highly effective in steel, featuring the Duratomic coating for improved tool life.F40M – PVD coated grade ideal for machining both stainless steel and titanium. MS2050 – PVD coated grade developed for Titanium and Titanium Alloys.



HIGH FEED R217/220.21 KITS

EDP Kit Description

Kit Contents


P

82699 HIGHFEED2 .625P KIT R217.21-0.625.0-LP06.2A 0.625 - 0.625 LPHW060310TR-MD07 MP2500 $34582700 HIGHFEED2 .750P KIT R217.21-0.75.0-LP06.2A 0.750 - 0.750 LPHW060310TR-MD07 MP2500 $34582705 HIGHFEED2 1.00P KIT R217.21-1.00.0-LP06.3A 1.000 - 1.000 LPHW060310TR-MD07 MP2500 $38541011 HIGHFEED 2.00P KIT R220.21-2.00-R160.4A 2.000 0.750 - 218.19-160T-04-M11 MP2500 $535

M

82706 HIGHFEED2 .625M KIT R217.21-0.625.0-LP06.2A 0.625 - 0.625 LPHT060310TR-M06 F40M $34582707 HIGHFEED2 .750M KIT R217.21-0.75.0-LP06.2A 0.750 - 0.750 LPHT060310TR-M06 F40M $34582710 HIGHFEED2 1.00M KIT R217.21-1.00.0-LP06.3A 1.000 - 1.000 LPHT060310TR-M06 F40M $38541014 HIGHFEED 2.00M KIT R220.21-2.00-R160.4A 2.000 0.750 - 218.19-160T-04-M08 F40M $535

S

82711 HIGHFEED2 .625T KIT R217.21-0.625.0-LP06.2A 0.625 - 0.625 LPHT 060310TR-ME05 MS2050 $34582715 HIGHFEED2 .750T KIT R217.21-0.75.0-LP06.2A 0.750 - 0.750 LPHT 060310TR-ME05 MS2050 $34582716 HIGHFEED2 1.00T KIT R217.21-1.00.0-LP06.3A 1.000 - 1.000 LPHT 060310TR-ME05 MS2050 $38582717 HIGHFEED 2.00T KIT R220.21-2.00-R160.4A 2.000 0.750 - 218.19-160T-04-M08 MS2050 $535

SAVE UP TO $230

SMG

MP2500

SMG

F40M

SMG



0.019 0.019 0.0212 0.0158 0.0158 0.017 0.0167 0.0167100% 30% 10% 100% 30% 10% 100% 30%

P1 1150 1300 1550 M1 680 770 920 S1 190 200P2 1100 1250 1500 M2 560 630 760 S2 150 165P3 970 1100 1325 M3 450 510 610 S3 135 145P4 860 970 1175 M4 345 390 465 S11 260 280P5 820 930 1125 M5 285 325 385 S12 200 215P6 930 1050 1275 – – – – S13 160 175P7 870 990 1200 – – – – – – –P8 820 930 1125 – – – – – – –

P11 850 960 1150 – – – – – – –

LP06 HIGH FEED 2

% = Cutter dia

218.19-160T HIGH FEED

SMG

MP2500

SMG

F40M

SMG



0.0284 0.0284 0.0313 0.0212 0.0212 0.0232 0.0198 0.0198100% 30% 10% 100% 30% 10% 100% 30%

P1 950 1100 1350 M1 670 770 920 S1 175 190P2 920 1075 1300 M2 550 640 770 S2 140 155P3 810 930 1125 M3 445 510 610 S3 125 135P4 710 820 1000 M4 340 390 470 S11 230 250P5 690 800 960 M5 285 325 390 S12 175 190P6 780 900 1075 – – – – S13 150 165P7 730 850 1025 – – – – – – –P8 680 790 950 – – – – – – –

P11 710 820 990 – – – – – – –% = Cutter dia

31Kit includes one cutter body, ten inserts and a wrench.

COPY MILLING

HIGH FEED 4Highfeed 4 incorporates new close-pitch and normal pitch designs, together with new inserts – LO06 – that allow for more teeth/insert pockets per cutter diameter, as compared to the existing range. With more teeth, higher feeds are achieved through the additional insert which excels in high-velocity, high-speed cutting of hard and tough-to-machine materials – especially when using smaller machines with high-rpm/low torque spindles. Performance results of the new cutters in terms of speed and efficiency far exceed those using larger, higher horsepower machines and taking slower heavier cuts.

FEATURED GRADESMP2500 – High feed MP2500 inserts with the MD07 or MD11 edge treatment are highly effective in steel, featuring the Duratomic coating for improved tool life.F40M – PVD coated grade ideal for machining both stainless steel and titanium.

Starting parameters for 100% Radial EngagementAPPLICATION DATA

HIGH FEED 4 KITS

EDP Kit Description

Kit Contents


P

56313 HIGHFEED4 1.00P KIT R217.21-1.00.0-LO06-3A 1.000 - 1.000 LOHT060310TR-M07 MP2500 $43056314 HIGHFEED4 1.25P KIT R217.21-1.25.0-LO06-4A 1.250 - 1.250 LOHT060310TR-M07 MP2500 $45056316 HIGHFEED4 1.50P KIT R220.21-01.50-LO06-6A 1.500 0.500 - LOHT060310TR-M07 MP2500 $52056317 HIGHFEED4 2.00P KIT R220.21-02.00-LO06-8A 2.000 0.750 - LOHT060310TR-M07 MP2500 $570

M

56319 HIGHFEED4 2.50P KIT R220.21-2.50-LO06.9A 2.500 0.750 - LOHT060310TR-M07 MP2500 $63056320 HIGHFEED4 1.00M KIT R217.21-1.00.0-LO06-3A 1.000 - 1.000 LOHT060310TR-ME06 F40M $43056321 HIGHFEED4 1.25M KIT R217.21-1.25.0-LO06-4A 1.250 - 1.250 LOHT060310TR-ME06 F40M $45056322 HIGHFEED4 1.50M KIT R220.21-01.50-LO06-6A 1.500 0.500 - LOHT060310TR-ME06 F40M $52056325 HIGHFEED4 2.00M KIT R220.21-02.00-LO06-8A 2.000 0.750 - LOHT060310TR-ME06 F40M $57056326 HIGHFEED4 2.50M KIT R220.21-2.50-LO06.9A 2.500 0.750 - LOHT060310TR-ME06 F40M $630

SAVE UP TO $235

% = Cutter dia

SMG

Steel - MP2500

SMG



0.0154 0.0154 0.0167 0.0134 0.0134 0.0142P1 1050 1175 1425 M1 630 700 850P2 1025 1150 1400 M2 520 580 700P3 890 1000 1200 M3 415 465 560P4 790 880 1075 M4 320 355 430P5 760 850 1025 M5 265 300 360P6 850 960 1150 – – – –P7 800 900 1075 – – – –P8 750 840 1025 – – – –P11 780 880 1050 – – – –

32

COPY MILLING

K2 BALLNOSEK2, or K=2 for two effective teeth, features an S-shaped insert in a ballnose configuration. Unique holding technology allows the cutter to perform very well in a range of copy milling applications.

FEATURED GRADES F25M – Added toughness for machining of tool steels and cast iron. F40M – Excellent choice for demanding applications, especially in stainless steels.

KITS CONTINUED ON NEXT PAGE...

APPLICATION DATA FOR INSERT SIZE - 218.20-250

SMG

F40M

SMG

F40MFeed fz (IPT) Feed fz (IPT)

100% 30% 20% 10% 100% 30% 20% 10%Cutting speed Vc (SFPM) Cutting speed Vc (SFPM)

0.0021 0.0023 0.0027 0.003 0.0018 0.002 0.0023 0.0026P1 1325 1650 1750 1925 M1 1025 1275 1350 1500P2 1275 1575 1675 1875 M2 850 1050 1125 1225P3 1125 1375 1475 1625 M3 700 860 910 980P4 990 1225 1300 1425 M4 550 660 710 750P5 940 1175 1250 1375 M5 455 550 590 620P6 1075 1325 1400 1525 – – – – –P7 1025 1250 1325 1450 – – – – –P8 940 1150 1225 1375 – – – – –

P11 980 1200 1275 1400 – – – – –

APPLICATION DATA FOR INSERT SIZE - 218.20-080

SMG

F40M

SMG



0.0051 0.0057 0.0065 0.0072 0.0043 0.0048 0.0055 0.0062P1 1125 1375 1475 1625 M1 820 1025 1075 1200P2 1100 1350 1425 1575 M2 680 840 900 980P3 960 1150 1250 1400 M3 570 700 740 800P4 840 1050 1125 1225 M4 465 560 600 610P5 800 990 1075 1175 M5 385 465 500 510P6 900 1125 1200 1300 – – – – –P7 850 1050 1125 1225 – – – – –P8 800 980 1050 1175 – – – – –

P11 830 1025 1100 1200 – – – – –

For complete cutting data, refer to Machining Navigator. Starting parameters for 100% Radial Engagement

SAVE UP TO $260

% = Cutter dia

% = Cutter dia

33

For max. depth of cut and spare parts see Machining Navigator.Kit includes one cutter body, ten inserts and a wrench.

K2 BALLNOSE R218.20 KITS MAX D.O.C. 0.236”

EDP Kit Description

Kit Contents


P

69966 K2BALL .500P KIT R218.20-00.500-3-11-060A 0.500 0.750 218.20-0.250ER-M03 F40M $490 23577 K2BALL .625P KIT R218.20-00.625-3-14-050A 0.625 0.750 218.20-080ER-M04 F40M $510 23578 K2BALL .750P KIT R218.20-00.750-3-17-070A 0.750 1.000 218.20-0.375ER-M05 F40M $570 23579 K2BALL 1.00P KIT R218.20-01.00-3-22-070A 1.000 1.000 218.20-125ER-M07 F25M $640

M

69968 K2BALL .500M KIT R218.20-00.500-3-11-060A 0.500 0.750 218.20-0.250ER-ME03 F40M $490 23569 K2BALL .625M KIT R218.20-00.625-3-14-050A 0.625 0.750 218.20-080ER-ME04 F40M $510 23570 K2BALL .750M KIT R218.20-00.750-3-17-070A 0.750 1.000 218.20-0.375ER-ME05 F40M $670 23571 K2BALL 1.00M KIT R218.20-01.00-3-22-070A 1.000 1.000 218.20-125ER-ME07 F40M $640

APPLICATION DATA - 218.20-375

SMG

F40M

SMG



0.0037 0.004 0.0045 0.005 0.0032 0.0034 0.0038 0.0043P1 1250 1500 1625 1800 M1 930 1150 1225 1350P2 1200 1475 1600 1725 M2 770 940 1025 1125P3 1050 1300 1375 1500 M3 630 780 840 890P4 930 1150 1225 1350 M4 510 620 660 680P5 890 1075 1175 1300 M5 425 520 550 570P6 1000 1225 1325 1450 – – – – –P7 940 1175 1250 1375 – – – – –P8 880 1075 1150 1275 – – – – –

P11 910 1125 1200 1325 – – – – –

APPLICATION DATA - 218.20-125

SMG

F25M

SMG



0.0051 0.0057 0.0066 0.0073 0.0043 0.0048 0.0055 0.0061P1 1125 1375 1475 1650 M1 860 1050 1125 1250P2 1075 1350 1450 1575 M2 710 870 930 1025P3 950 1175 1250 1375 M3 590 720 770 830P4 840 1025 1100 1225 M4 485 580 630 640P5 800 990 1050 1175 M5 400 485 520 530P6 920 1100 1200 1300 – – – – –P7 870 1050 1125 1225 – – – – –P8 800 990 1050 1175 – – – – –

P11 840 1025 1100 1200 – – – – –

COPY MILLING

K2 BALLNOSE (CON’T)

% = Cutter dia

% = Cutter dia

34

The Niagara C430 series end mills come equipped with four precision ground flutes that are capable of handling a variety of metal removal applications. Coupled with a TiAlN coating, these general purpose end mills out preform many traditional cutting tools. The C series is offered in a range that is best fit for any job shop environment. This single tool can replace the use of multiple tools for increased productivity, tool life and cost reduction. The C series of Niagara end mills also comes in a two and three flute option.

NIAGARA CUTTER™ SOLID END MILLING

GENERAL PURPOSE C430 SERIES KITS

Kit includes six end mills in assorted sizes.C430 GENERAL PURPOSE

KIT EDP Kit Description End Mills EDPFlute Dia

Shank Dia

Length of cut

Overall Length Price

N12179 6 PACK C430 GEN TIALN

C430-0.188-D3-S.0-Z4 TIALN N85590 3/16 3/16 5/8 2

$145

C430-0.250-D3-S.0-Z4 TIALN N85594 1/4 1/4 3/4 2-1/2

C430-0.313-D3-S.0-Z4 TIALN N85598 5/16 5/16 13/16 2-1/2

C430-0.375-D2-S.0-Z4 TIALN N85602 3/8 3/8 1 2-1/2

C430-0.500-D2-S.0-Z4 TIALN N85610 1/2 1/2 1 3

C430-0.625-D2-S.0-Z4 TIALN N85612 5/8 5/8 1-1/4 3-1/2

Slotting Parametersat 50% of D









Steel (SMG P1-P2)

Steel (SMG P3-P4)

Steel (SMG P5-P6)

Stainless Steel (SMG M1-M2)

Stainless Steel (SMG H11-H12)

Cast Iron(SMG K1-K4)

Cast Iron(SMG K5-K6)

Super Alloys(SMG S1-S3)

Super Alloys(SMG S12)

RPMFeed (IPM) RPM

Feed (IPM) RPM

Feed (IPM) RPM

Feed (IPM) RPM

Feed (IPM) RPM

Feed (IPM) RPM

Feed (IPM) RPM

Feed (IPM) RPM

Feed (IPM)

8141 22 4071 6.8 2035 2.9 6521 8.6 5089 6.1 5492 19.1 2958 6 1425 3.2 2286 4.8

6112 22 3056 6.8 1528 2.9 4890 8.6 3820 6.1 4126 19.1 2216 6 1070 3.2 1711 4.8

4877 22 2438 6.8 1219 2.9 3906 8.6 3049 6.1 3290 19.1 1772 6 854 3.2 1369 4.8

4075 22 2037 6.8 1019 2.9 3260 8.6 2547 6.1 2750 19.1 1477 6 713 3.2 1141 4.8

3056 22 1528 6.8 764 2.9 2445 8.6 1910 6.1 2063 19.1 1108 6 535 3.2 856 4.8

2037 22 1222 6.8 611 2.9 1956 8.6 1528 6.1 1650 19.1 886 6 428 3.2 685 4.8

For complete cutting data including profiling, reference the Niagara Catalog.

SAVE UP TO $100

35


ELITE A345 SERIES KITSNiagara Cutters Elite series A345 of end mills feature specific geometries for nonferrous materials, available in 0.125” - 1.25” diameters.

The A series is designed for Aluminum and non ferrous materials and is available with two or three flutes in a variety of configurations.

A345• Cylindrical land to eliminate chatter• Form ground flute shape• Eccentric primary relief• Ideal for peripheral milling

Kit includes six end mills in assorted sizes.SLOTTING PARAMETERS AT 1/2 X D


Shank Dia

Length of cut

Overall Length

Non Ferrous (SMG N1)

Non Ferrous (SMG N2-N3)

PriceRPMFeed (IPM) RPM

Feed (IPM)

N12182 6 PACK A345 ELITE TICN

A345-0.125-D3-S.0-Z3 TICN N61627 1/8 1/8 3/8 1-1/2 20370 110 16303 70.4

$160

A345-0.188-D3-S.0-Z3 TICN N61631 3/16 3/16 9/16 2 15280 110 12224 70.4

A345-0.250-D3-S.0-Z3 TICN N61635 1/4 1/4 3/4 2-1/2 12202 110 9766 70.4

A345-0.313-D3-S.0-Z3 TICN N61640 5/16 5/16 13/16 2-1/2 10187 110 8149 70.4

A345-0.375-D3-S.0-Z3 TICN N61646 3/8 3/8 1 2-1/2 7640 110 6112 70.4

A345-0.500-D3-S.0-Z3 TICN N61655 1/2 1/2 1-1/4 3 6112 110 4890 70.4


SAVE UP TO $130

36


STABILIZER KITSNiagara Cutters Stabilizer Product family provides high performance geometries that offers versatility in various materials. This family features patented geometry with eccentric primary relief. The STR430 geometries are ideal for carbon steels, alloy steels, tool steels and cast irons.

STR430• Eccentric primary relief• Asymmetrical flute geometry• Weldon flat standard on shank sizes 3/8” and larger• US Patent #6,991,409• Ideal for carbon steels, alloy steels, tool steels, cast iron, copper



Shank Dia

Length of cut

Overall Length

Steel (SMG P3-P4)

Cast Iron (SMG K1-K4)


Feed (IPM)

N00072 6 PACK STR430 STAB ALTIN

STR430-0.125-D3-R010.0-Z4 N60680 1/8 1/8 3/8 1-1/2 9932 14 10696 24

$170

STR430-0.188-D2-R010.0-Z4 N60684 3/16 3/16 7/16 2 6600 14 7110 24

STR430-0.250-D2-R020.0-Z4 N60688 1/4 1/4 1/2 2-1/2 4966 14 5348 24

STR430-0.313-D3-R020.0-Z4 N60691 5/16 5/16 13/16 2-1/2 3970 14 4270 24

STR430-0.375-D2-R020.3-Z4 N60694 3/8 3/8 7/8 2-1/2 3311 14 3565 24

STR430-0.500-D2-R030.3-Z4 N60700 1/2 1/2 1 3 2483 14 2674 24

N00073 6 PACK STR430 STAB AlCrN

STR430-0.125-D3-R010.0-Z4 N68237 1/8 1/8 3/8 1-1/2 9932 14 10696 24

$170

STR430-0.188-D2-R010.0-Z4 N68241 3/16 3/16 7/16 2 6600 14 7110 24

STR430-0.250-D2-R020.0-Z4 N68245 1/4 1/4 1/2 2-1/2 4966 14 5348 24

STR430-0.313-D3-R020.0-Z4 N68248 5/16 5/16 13/16 2-1/2 3970 14 4270 24

STR430-0.375-D2-R020.3-Z4 N68251 3/8 3/8 7/8 2-1/2 3311 14 3565 24

STR430-0.500-D2-R030.3-Z4 N68257 1/2 1/2 1 3 2483 14 2674 24


SAVE UP TO $110

37


STABILIZER KITS (CON’T)Niagara Cutters Stabilizer Product family provides high performance geometries that offers versatility in various materials. This family features patented geometry with eccentric primary relief. The STR440 geometries offer higher performance designed for stainless steels, high temp alloys, nickel based alloys and titanium.

STR440• Eccentric primary relief• Asymmetrical flute geometry• US Patent #6,991,409• Ideal for stainless steels, high temperature alloys, nickel based alloys, titanium

and titanium alloys



Shank Dia

Length of cut

Overall Length

Titanium (SMG S12)

Stainless Steel (SMG M1-M2)


Feed (IPM)

N00074 6 PACK STR440 STAB ALTIN

STR430-0.125-D3-R010.0-Z4 N57454 1/8 1/8 3/8 1-1/2 3667 4.5 11307 16

$170

STR440-0.188-D2-R010.0-Z4 N57458 3/16 3/16 7/16 2 2438 4.5 7515 16

STR440-0.250-D2-R020.0-Z4 N57462 1/4 1/4 1/2 2-1/2 1834 4.5 5654 16

STR440-0.313-D3-R020.0-Z4 N57465 5/16 5/16 13/16 2-1/2 1464 4.5 4515 16

STR440-0.375-D2-R020.3-Z4 N57468 3/8 3/8 7/8 2-1/2 1222 4.5 3769 16

STR440-0.500-D2-R030.3-Z4 N57474 1/2 1/2 1 3 917 4.5 2827 16

N00075 6 PACK STR440 STAB AlCrN

STR440-0.125-D3-R010.0-Z4 N68445 1/8 1/8 3/8 1-1/2 3667 4.5 11307 16

$170

STR440-0.188-D2-R010.0-Z4 N68449 3/16 3/16 7/16 2 2438 4.5 7515 16

STR440-0.250-D2-R020.0-Z4 N68453 1/4 1/4 1/2 2-1/2 1834 4.5 5654 16

STR440-0.313-D3-R020.0-Z4 N68456 5/16 5/16 13/16 2-1/2 1464 4.5 4515 16

STR440-0.375-D2-R020.3-Z4 N68459 3/8 3/8 7/8 2-1/2 1222 4.5 3769 16

STR440-0.500-D2-R030.3-Z4 N68465 1/2 1/2 1 3 917 4.5 2827 16


SAVE UP TO $110

38

SOLID END MILLING

JABRO™ JS500 SERIESSeco’s family of solid carbide milling cutters, Jabro™-Solid², is designed to give a high level of performance in all general machining operations. These easy-to-use, versatile square shoulder and ball nose end mills provide full machining flexibility at an excellent price-performance ratio in all workpiece materials.

JS550 SERIES – HIGH PERFORMANCE SOLID CARBIDE SQUARE SHOULDER CUTTERS: JS553 (3 flutes), JS554 (4 flutes) • Double core design provides extra stability and reduces tool deflection thus

allowing for higher cutting speeds & feeds • 3 & 4-flute designs for slotting and side milling • Differential pitch design for chatter free machining • Polished Siron-A coating allows for very smooth chip flow and

enhances tool life

Kit includes three end mills in assorted sizes.JABRO-SOLID2 KITS

KIT EDP Kit Description End Mills EDP

Dimensions in inchSteel

(SMG P3-P4) Stainless

(SMG M1-M2)Cast Iron

(SMG K1-K4)

PriceFlute Dia

Shank Dia

Length of cut

Overall Length RPM

Feed (IPM) RPM

Feed (IPM) RPM

Feed (IPM)

79048 JS553-KIT

5530250R015Z3.0-SIRON-A 58918 1/4 1/4 1/2 2-1/2 7430 36” 4240 15” 8490 36”

$1905530375R015Z3.0-SIRON-A 58922 3/8 3/8 3/4 3 4460 36” 2550 15” 5090 36”

5530500R015Z3.0-SIRON-A 58927 1/2 1/2 1 3-1/2 3710 36” 2120 15” 4240 36”

Data for JS553 is based on side milling roughing parameters. Reference catalog for detailed recommendations.

79049 JS554-KIT

5540250R015Z4.0-SIRON-A 58709 1/4 1/4 1/2 2-1/2 7430 42” 4240 16” 8490 40”

$1955540375R015Z4.0-SIRON-A 58727 3/8 3/8 3/4 3 4460 42” 2550 16” 5090 40”

5540500R015Z4.0-SIRON-A 58732 1/2 1/2 1 3-1/2 3710 42” 2120 16” 4240 40”

Data for JS554 is based on side milling roughing parameters. Reference catalog for detailed recommendations.

SAVE UP TO $90

39

DRILLING

40

DRILLING / HOLEMAKING

PERFOMAX®

The unique PerfoMax indexable drill offers stability and high productivity in kits ranging from 0.750 to 2.00” drill diameters in 3xD applications.

FEATURED GRADES DP2000 – Duratomic coating technology and superior edge toughness makes this the first choice for high speed applications in steel and cast iron. T400D – Tough, reliable center insert grade where cutting speeds can be near zero.

PERFOMAX PRODUCTIVITY KITS 3XD Kit includes ten center and ten peripheral inserts along with the specified drill body.


Drills in kits are for non-rotating applications

EDP Kit Description Cutter Drill dia. Shank dia. Insert (10 pcs.) Price

41266 PERFOMAX 3/4" 3X SD503-0750-225-1000R7-C-SC05 0.750 1.000 SPGX 0602-C1 T400D $410SCGX 050204-P2 DP2000

68958 PERFOMAX 13/16 3X SD503-0812-244-1000R7-C 0.812 1.000 SPGX 0602-C1 T400D $425SCGX 060204-P2 DP2000

68959 PERFOMAX 7/8" 3X SD503-0875-263-1000R7-C 0.875 1.000 SPGX 0703-C1, T400D $435SCGX 060204-P2 DP2000

68960 PERFOMAX 15/16" 3X SD503-0937-281-1000R7-C 0.937 1.000 SPGX 0703-C1, T400D $445SCGX 070308-P2, DP2000

41268 PERFOMAX 1" 3X SD503-1000-300-1250R7-C 1.000 1.250 SPGX 0703-C1, T400D $445SCGX 070308-P2, DP2000

68961 PERFOMAX 1 1/8" 3X SD503-1125-338-1250R7-C 1.125 1.250 SPGX 0903-C1, T400D $490SCGX 09T308-P2, DP2000

41270 PERFOMAX 1 1/4" 3X SD503-1250-375-1500R7-C-SP11 1.250 1.500 SPGX 11T3-C1, T400D $490SCGX 09T308-P2, DP2000

68962 PERFOMAX 1 3/8" 3X SD503-1375-413-1500R7-C 1.375 1.500 SPGX 11T3-C1, T400D $525SCGX 120408-P2, DP2000

41271 PERFOMAX 1 1/2" 3X SD503-1500-450-1500R7-C-SP12 1.500 1.500 SPGX 12T3-C1, T400D $540SCGX 120408-P2, DP2000

41273 PERFOMAX 1 3/4" 3X SD503-1750-525-1500R7-C 1.750 1.500 SPGX 1504-C1, T400D $570SCGX 120408-P2, DP2000


APPLICATION DATA – PERFOMAX - 3XD - DP2000

Cutting speed recommendations are based upon peripheral insert tool life of 275 inches drilled (20-30 min). Inserts should not be used with flank wear exceeding 0.008"-0.016" measured at the largest point.

SMGCutting Speed

fØ0.590-0.767

Ø0.768-0.885

Ø0.886-1.121

Ø1.122-1.357

Ø1.358-1.751

Ø1.752-2.375

P1 830 0.0044 0.0050 0.0065 0.0070 0.0085 0.0095P2 810 0.0020 0.0026 0.0034 0.0040 0.0048 0.0055P3 700 0.0040 0.0050 0.0060 0.0070 0.0080 0.0095P4 760 0.0040 0.0050 0.0060 0.0065 0.0080 0.0095P5 720 0.0040 0.0048 0.0060 0.0065 0.0080 0.0085P6 810 0.0040 0.0048 0.0055 0.0065 0.0075 0.0085P7 770 0.0040 0.0048 0.0055 0.0065 0.0075 0.0085P8 720 0.0040 0.0050 0.0060 0.0070 0.0080 0.0095

P11 750 0.0040 0.0048 0.0055 0.0065 0.0075 0.0085

SMGCutting Speed

fØ0.590-0.767

Ø0.768-0.885

Ø0.886-1.121

Ø1.122-1.357

Ø1.358-1.751

Ø1.752-2.375

K1 640 0.0044 0.0055 0.0065 0.0075 0.0085 0.0100K2 560 0.0040 0.0048 0.0060 0.0065 0.0080 0.0085K4 470 0.0040 0.0048 0.0060 0.0065 0.0080 0.0085K4 450 0.0040 0.0048 0.0060 0.0065 0.0080 0.0085K5 270 0.0036 0.0044 0.0050 0.0060 0.0070 0.0080

SAVE UP TO $530

41

DRILLING / HOLEMAKING

PERFOMAX™

The unique PerfoMax indexable drill offers stability and high productivity in kits ranging from 0.750 to 2.00” drill diameters in 4XD applications.

FEATURED GRADESDP3000 – Duratomic coating technology applied to a tough substrate for maximum application security. First choice in stainless steel and in demanding operations. T400D – Tough, reliable center insert grade where cutting speeds can be near zero.

PERFOMAX PRODUCTIVITY KITS 4XD Kit includes ten center and ten peripheral inserts along with the specified drill body.


Drills in kits are for non-rotating applications

EDP Kit Description Drill Drill dia. Shank dia. Insert (10 pcs.) Price

41275 PERFOMAX 3/4" 4X SD504-0750-300-1000R7-C-SC05 0.750 1.000 SPGX 0602-C1 T400D $460SCGX 050204-P2 DP3000

68964 PERFOMAX 13/16" 4X SD504-0812-325-1000R7-C 0.812 1.000 SPGX 0602-C1 T400D $470SCGX 060204-P2 DP3000

68965 PERFOMAX 7/8" 4X SD504-0875-350-1000R7-C 0.875 1.000 SPGX 0703-C1, T400D $480SCGX 060204-P2 DP3000

68966 PERFOMAX 15/16" 4X SD504-0937-375-1000R7-C 0.937 1.000 SPGX 0703-C1, T400D $490SCGX 070308-P2, DP3000


68967 PERFOMAX 1 1/8" 4X SD504-1125-450-1250-R7-C 1.125 1.250 SPGX 0903-C1, T400D $525SCGX 09T308-P2, DP3000

69259 PERFOMAX 1 1/4" 4X SD504-1250-500-1500R7-C 1.250 1.500 SPGX 11T3-C1, T400D $525SCGX 09T308-P2, DP3000

68968 PERFOMAX 1 3/8" 4X SD504-1375-550-1500R7-C 1.375 1.500 SPGX 11T3-C1, T400D $560SCGX 120408-P2, DP3000

69275 PERFOMAX 1 1/2" 4X SD504-1500-600-1500R7-C-SP12 1.500 1.500 SPGX 12T3-C1, T400D $595SCGX 150512-P2, DP3000

41282 PERFOMAX 1 3/4" 4X SD504-1750-700-1500R7-C 1.750 1.500 SPGX 1504-C1, T400D $615SCGX 120408-P2, DP3000


APPLICATION DATA – PERFOMAX - 4XD - DP3000

Cutting speed recommendations are based upon peripheral insert tool life of 275 inches drilled (20-30 min). Inserts should not be used with flank wear exceeding 0.008"-0.016" measured at the largest point.

SMGCutting Speed

fØ0.590-0.767

Ø0.768-0.885

Ø0.886-1.121

Ø1.122-1.357

Ø1.358-1.751

Ø1.752-2.375

P1 620 0.0044 0.0050 0.0065 0.0070 0.0085 0.0095P2 600 0.0020 0.0026 0.0034 0.0040 0.0048 0.0055P3 520 0.0040 0.0050 0.0060 0.0070 0.0080 0.0095P4 550 0.0040 0.0050 0.0060 0.0065 0.0080 0.0095P5 520 0.0040 0.0048 0.0060 0.0065 0.0080 0.0085P6 580 0.0040 0.0048 0.0055 0.0065 0.0075 0.0085P7 550 0.0040 0.0048 0.0055 0.0065 0.0075 0.0085P8 520 0.0040 0.0050 0.0060 0.0070 0.0080 0.0095

P11 540 0.0040 0.0048 0.0055 0.0065 0.0075 0.0085

SMGCutting Speed

fØ0.590-0.767

Ø0.768-0.885

Ø0.886-1.121

Ø1.122-1.357

Ø1.358-1.751

Ø1.752-2.375

K1 445 0.0044 0.0055 0.0065 0.0075 0.0085 0.0100K2 385 0.0040 0.0048 0.0060 0.0065 0.0080 0.0085K4 325 0.0040 0.0048 0.0060 0.0065 0.0080 0.0085K4 310 0.0040 0.0048 0.0060 0.0065 0.0080 0.0085K5 185 0.0036 0.0044 0.0050 0.0060 0.0070 0.0080

SAVE UP TO $530

42

APPLICATION DATA – CROWNLOC - SD103 – Ø0.394-1.024

CROWNLOC DRILL KITS Kit includes one drill body, two crowns and a wrench for precise clamping of the crown.

f = in/rev vc = sf/min (All cutting data are start values)


EDP Kit Description

Kit Contents

PriceCutter Drill Dia. Shank Crowns (6 Pcs.)

56230 CROWNLOC 1/2" 3xD Kit-P SD103-12.50/12.99-40-0625R7 0.500 0.625 SD100-12.70-P $56041296 CROWNLOC 9/16" 3xD Kit-P SD103-14.00/14.99-50-0625R7 0.562 0.625 SD100-14.29-P $56041297 CROWNLOC 5/8" 3xD Kit-P SD103-15.00/15.99-50-0625R7 0.625 0.625 SD100-15.88-P $59041298 CROWNLOC 11/16" 3xD Kit-P SD103-17.00/17.99-60-0750R7 0.687 0.750 SD100-17.46-P $59041299 CROWNLOC 3/4" 3xD Kit-P SD103-19.00/19.99-60-0750R7 0.750 0.750 SD100-19.05-P $64541300 CROWNLOC 13/16" 3xD Kit-P SD103-20.00/21.99-75-1000R7 0.813 1.000 SD100-20.638-P $68541302 CROWNLOC 7/8" 3xD Kit-P SD103-22.00/23.99-75-1000R7 0.875 1.000 SD100-22.225-P $76541303 CROWNLOC 15/16" 3xD Kit-P SD103-22.00/23.99-75-1000R7 0.938 1.000 SD100-23.813-P $76541304 CROWNLOC 1" 3xD Kit-P SD103-24.00/25.99-75-1000R7 1.000 1.000 SD100-25.4-P $845

SMG

f

VcØ0.394 Ø0.472 Ø0.551 Ø0.630 Ø0.709 Ø0.787 Ø0.866 Ø0.945 Ø1.024P1 0.0080 0.0095 0.010 0.011 0.012 0.013 0.013 0.013 0.014 385P2 0.0080 0.0095 0.010 0.011 0.012 0.013 0.013 0.014 0.014 375P3 0.0075 0.0085 0.0095 0.010 0.011 0.012 0.013 0.013 0.013 325P4 0.0075 0.0085 0.0095 0.010 0.011 0.012 0.013 0.013 0.013 285P5 0.0075 0.0085 0.0095 0.010 0.011 0.012 0.012 0.013 0.013 270P6 0.0070 0.0085 0.0095 0.010 0.011 0.011 0.012 0.013 0.013 305P7 0.0070 0.0085 0.0095 0.010 0.011 0.011 0.012 0.013 0.013 290P8 0.0075 0.0085 0.0095 0.010 0.011 0.012 0.013 0.013 0.013 270

P11 0.0070 0.0085 0.0095 0.010 0.011 0.011 0.012 0.013 0.013 280

SAVE UP TO $289

HOLEMAKING

CROWNLOC®

Crownloc® drills are the economical, convenient way to achieve the holemaking tolerance of a brazed drill, but with superior metal removal rates. These drills don’t need regrinding, so they’re more cost-effective. When precision counts Crownloc provides the ultimate solution.

• Different geometries for different work piece materials• Large range of drill crown diameters, geometries and drill body lengths• P geometry for drilling in steel

43

SMG DESCRIPTION PROPERTIES REFERENCE

H5 Quenched & Tempered steels

38 < HRC < 56 414050 HRC

SMG DESCRIPTION PROPERTIES (KSI) REFERENCE

P4 Low alloy general structural steels, 0.25% < C < 0.67%wt Low alloy Quench & Temper steels

75 < UTS < 175 1045UTS = 95 ksi

P5 Structural steels, 0.25% < C < 0.67%wt Quench & Temper steels

80 < UTS < 175 4140UTS = 100 ksi

SMG v2 is the foundation for a new and accurate way of organizing work materials and choosing the correct speed, feed rate and depth of cut for any work material and any Seco tool. In addition to using a greater number of work material groups com-pared to our previous system, SMG v2 also incorporates a reference material - or standard - for each group. The machinability of all other materials within that group can be compared to the standard, allowing for adjustments to the cutting data and accounting for the unique characteristics of each material.

THE USE OF SMG v2 IS ILLUSTRATED BELOWAs shown in Table I, the reference material for work material group P4 is 1045, for P5 it is 4140 steel and for H5 it is 4140 hardened to 50 HRC. 4140 steel is available in a wide variety of hardness and tensile strengths. It will be expected that the machinability will vary with these properties.

Table II gives some examples of 4140 in different conditions.

The graphs indicate how the speed recommendation for a specific material can be adjusted to account for the different properties of the steel. As an example, consider 4140 with a tensile strength (UTS) of 145 ksi. The standard material for SMG P5 is 4140 steel with a tensile strength of 100 ksi. Since the material of interest is 45% stronger, the cutting speed will have to be reduced. Following the black arrows in Figure 1, it can be seen that a speed 75% of that recommended for 4140 at 100 ksi should be used. So if a cutting speed of 900 sf/min is suggested for a tool of interest when machining 4140 at 100 ksi, a speed of 675 sf/min (900 X 0.75) should be used if the 4140 has a tensile strength of 145 ksi.

SMG EN W.-Nr AFNOR BS UNI JIS AISI / ASTM GOST CONDITION UTS (ksi) HRC nom

P542 CrMo 4 1.1201 42 CD 4 708 M 40 42 CrMo 4 SCM 440 (H) 4142, 4140 38HM Annealed 10042 CrMo 4 1.1201 42 CD 4 708 M 40 42 CrMo 4 SCM 440 (H) 4142, 4140 38HM Quenched & Tempered 145

H542 CrMo 4 1.1201 42 CD 4 708 M 40 42 CrMo 4 SCM 440 (H) 4142, 4140 38HM Quenched & Tempered 4542 CrMo 4 1.1201 42 CD 4 708 M 40 42 CrMo 4 SCM 440 (H) 4142, 4140 38HM Quenched & Tempered 50

If the 4140 is quenched and tempered to a hardness of 45 HRC, an accurate cutting speed can be obtained by using Figure 2. The standard material for SMG H5 is 4140 heat treated to a hardness of 50 HRC. Logically, a softer material, in this case 45 HRC, can be machined at a higher speed. Since the hardness, 45 HRC, is 90% that of the standard material, Figure 2 shows a speed 120% that of the standard could be used. If a speed of 200 sfpm is recommended when machining 4140 at 50 HRC, a speed of 240 sf/min (200 X 1.2) could be used if the 4140 is 45 HRC.

Figure 1 Figure 2

HRC

SECO MATERIAL GROUPSVERSION 2 (SMG v2) - INTRO

For more convenient cutting data recommendations use applicable tools in My Pages - www.secotools.com

44

SMG V2

STEELS, FERRITIC AND MARTENSITIC STAINLESS STEELS

SMG DESCRIPTIONPROPERTIESUTS = Ultimate tensile strength (ksi) REFERENCE MATERIAL (ANSI)

P1 Free-cutting steels 50 < UTS < 751213UTS = 55 ksi

P2Low alloy ferritic steels, C < 0.25%wt Low alloy weldable general structural steels

45 < UTS < 85A 573 Gr. 58UTS = 60 ksi

P3Ferritic & ferritic/pearlitic steels, C < 0.25%wt Weldable general structural steels Case hardening steels

60 < UTS < 905115UTS = 80 ksi

P4 Low alloy general structural steels, 0.25% < C < 0.67%wt Low alloy Quench & Temper steels

75 < UTS < 1751045UTS = 95 ksi

P5Structural steels, 0.25% < C < 0.67%wt Quench & Temper steels

80 < UTS < 1754140UTS = 100 ksi

P6Low alloy through hardening steels, C > 0.67%wt Low alloy spring and bearing steels

75 < UTS < 1701095UTS = 85 ksi

P7Through hardening steels, C > 0.67%wt Spring and bearing steels

85 < UTS < 17052100UTS = 95 ksi

P8Tool steels High Speed Steels (HSS)

85 < UTS < 170H13UTS = 100 ksi

P11 Ferritic & martensitic stainless steels 60 < UTS < 170420UTS = 95 ksi

45

FREE-CUTTING, AUSTENITIC AND DUPLEX STAINLESS STEELSSMG DESCRIPTION PROPERTIES REFERENCE MATERIAL (ANSI)

M1 Free-cutting austenitic stainless steels 303

M2 Low alloy austenitic stainless steels 304

M3 Medium alloy austenitic stainless steels 316 L

M4 High alloy austenitic and duplex stainless steels 2205 Duplex

M5 Difficult high alloy austenitic and duplex stainless steels 2507 Super duplex

CAST IRONS

SMG DESCRIPTION PROPERTIES REFERENCE MATERIAL (ANSI)

K1 Grey cast irons (GCI) A48 35 B

K2 Compacted graphite irons (CGI) Grade 400-15

K3 Malleable cast irons (MCI) A220 60004

K4 Nodular cast irons (SGI) 80-55-06

K5 Austempered ductile irons (ADI) 1050/700/7

K6 Austenitic lamellar cast irons A436 Type 1 (Ni-Resist 1)

K7 Austenitic nodular cast ironsA439 Type D-2M (Ni-Resist D-2M)

WORKPIECE MATERIALS CLASSIFICATION, SMG v2

46

NON-FERROUS METALS


N1 Aluminum alloys, Si < 9% 7075-T6

N2 Aluminum alloys, 9% < Si < 16%413.2 Si = 12%

N3 Aluminum alloys, Si >16% AlSi17Cu5

N11 Copper alloys UNS C38500

SUPERALLOYS AND TITANIUM


S1 Iron based superalloys Discalloy

S2 Cobalt based superalloys Stellite 21

S3 Nickel based superalloys Inconel 718

S11 Titanium, low alloyed, (a) Ti

S12 Titanium, medium alloyed, (a+β) TiAl6V4

S13 Titanium, high alloyed, (near β and β) Ti10V2Fe3Al

HARD MATERIALS


H3 Case hardened steels 58 < HRC < 62511560 HRC

H5 Quenched & Tempered steels 38 < HRC < 56414050 HRC

H7Quenched & Tempered steels Bearing steels

56 < HRC < 645210060 HRC

H8Tool steels High Speed Steels

38 < HRC < 64H1350 HRC

H11 Martensitic stainless steels 38 < HRC < 5042045 HRC

H12 Precipitation hardened stainless steels 33 < HRC < 5017-4PH35 HRC

H21 Manganese steels 23 < HRC < 64Hadfield, High manganese steel50 HRC

H31 White cast irons 50 < HRC < 64A532 ID, White cast iron55 HRC


47

OTHER DIFFICULT MATERIALS


PM1 Low alloy PM materials F-0008 Fe-0.7C

PM2 Medium alloy PM materials FLC-4608 Fe2Cu1.8Ni0.5Mo0.2Mn0.8C

PM3High alloy PM materials Exhaust valve seat materials

HF1Hard facing alloys Welded or plasma deposited iron based alloys

HF2Hard facing alloys Welded or plasma deposited cobalt and nickel based alloys

CC1 Sintered tungsten carbide G50

PLASTICS AND COMPOSITES


TS1 Thermosetting polymers Urea formaldehyde (UF)

TS2 Thermosetting Carbon fiber composites T300 T700 T800 HTA-S IMA - Epoxy (M21)...

TS3 Thermosetting Glass fiber composites Epoxy - HX..(42..)/E glass (7781...)...

TS4 Thermosetting Aramide fiber composites Kevlar 49

TP1 Thermoplastic polymers Polycarbonate (PC)

TP2 Thermoplastic Carbon fiber composites PPS/PEEK - T300..

TP3 Thermoplastic Glass fiber composites PPS/PEEK - E glass or A glass...

TP4 Thermoplastic Aramide fiber composites

GRAPHITE


GR1 Graphite R 8500


KITS EFFECTIVE JULY 2015

To find an Authorized SECO Distributor near you, please refer to the Distributor Locator on our website:

SECOTOOLS.COM/US

For technical assistance, call: 1-800-832-8326

Follow Seco Tools on Twitter, Facebook, LinkedIn, Blogger and YouTube. Stay up to date on new products and technology, special events, promotions and more.

SECOTOOLS.COM/US/FOLLOWSECO

NORTH AMERICAN HEADQUARTERS2805 BELLINGHAM DRIVE TROY, MI 48083248-528-5200

Kits are non-returnableP-1506-8000 GT15-511Copyright © 2015 Seco Tools, LLC Printed in USA. All rights reserved.

Date post:	14-Apr-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

BOOST YOUR PRODUCTIVITY!cctool.com/files/Productivity_Kit_Catalog_web.pdf(Seco grade numbers are...

Documents