Date post: | 08-Apr-2015 |
Category: |
Documents |
Upload: | nikhil-patwardhan |
View: | 820 times |
Download: | 5 times |
Electric Drivesand Controls Hydraulics
Linear Motion andAssembly Technologies Pneumatics Service
The Drive & Control AcademyTraining Calendar 2010
The Drive & Control Company
We value our customers' "Feedback"
Feed back
Easy understanding of circuit & functioning of each components.
-Mr. O.M.KannaScientist B, V.R.D.E., Ahmednagar
This will help in rectifying many of the hydraulic related problems also.
-Mr. P.V.PillaiSenior General Manager, Mahindra Ugine Steel Co. Ltd., Raigad
It is nice programme and very useful for selection of proper valves for different application.
-Mr. Krishna Kumar ThakurManager, Tata Steel Ltd., Jamshedpur
Part of this training programme is essentially required in my project job during installation / commissioning of any hydraulic units.
-Mr.Asish Kr. BiswasManager, Steel Authority of India Ltd., Burnpur
It will be very helpful to understand the hydraulic system of our reheating furnace (Beam type) and it will be helpful in maintenance.
-Mr. Dipankar DasManager, Durgapur Steel Plant, Durgapur
This will beneficial for teaching students with 100 % confidence and I think this will helpful in Research and Development application.
-Mr. Manas Ranjan MishraSenior Lecturer, C.V.Raman College of Engineering, Bhubaneswar
Electric Drivesand Controls Hydraulics
Linear Motion andAssembly Technologies Pneumatics Service
Dear Customers,
Greetings for the New Year!!
Year 2009 showed effect of economic slow down . This was an opportunity for many corporations to think for the future course in terms of better processes, Knowledge enrichment, training, Quality systems. Every one realized that Knowledge is power.
During the year Bosch Rexroth actively involved in supporting the customers in Knowledge enrichment with active interaction in respect to training and tie ups for enhancing technical competencies in their organization.
We entered into many short term tie ups with customers and also signed MOU with a few for providing training to their engineers and technicians on the subject of Hydraulics and Drive & Control topics. We involved ourselves in training and spreading the base for an active industry institute partnership to lay a foundation to bridge the technological gaps..
Our knowledge sharing activities have been well received by industries for 'Drive and Control' technologies. Our initiatives in university education up gradation programme will help all our customers to source well trained technical man power.
Our customers now understand “service quality”, “life cycle enhancement”, “lower running cost” and “improvement in productivity” and hence proper knowledge to users is necessary to solve problems and achieve the objectives. We are committed to enhance your knowledge in all 'Drive & Control' technologies.
Please do not hesitate to contact us for any special training needs on our Drive and Control technologies as Bosch Rexroth are world leaders and only company to provide equipment and support on all Drives. Training for us is part of our service organization SVH and hence we can offer our customers fields service, repairs and spare part support from single window.
We assure you of our best services at all the times.
Yours sincerely
Mr. Martin VoglsangerManaging Director.
3
Contents
Training Calendar 2010
Sr. No. Title Code Page No.
1 Forward - 32 Contents - 43 Monthwise training programme - 5, 64 Industrial hydraulics IH 75 Continuous control hydraulics CCH 86 Hydraulic contamination control and maintenance HCCM 97 Mobile hydraulics MH 108 Hydraulics and pneumatics for students HP 119 Customized training in industrial CIH 12
hydraulics at customer’s premises10 Customized training program in advanced industrial CIHA 13
hydraulics at customer’s premises11 Advanced hydraulics courses for 14
specific industry segment at our training centre12 Steel mill hydraulics SP01 1513 Machine tools hydraulics SP02 1614 Hydraulic cylinders SP03 1715 Hydraulics for Power generation SP04 1816 Hydraulics for civil engineering SP05 19
applications17 Press hydraulics SP06 2018 Foundry hydraulics SP07 2119 Axial piston pumps servicing SP08 2220 Plastic machinery hydraulics SP09 2321 Drill rig hydraulics SP10 2422 Crane hydraulics SP11 2523 Excavator and loader hydraulics SP12 2624 Road construction machinery hydraulics SP13 2725 Mechatronics SP14 2826 Basic concepts of single axis Indra Drive & HMI IND001 2927 Basic concepts of multi axis Indra Drive MLD-M & HMI IND002 3028 Basic concepts of IndraControl PLC & HMI PLC001 31
29 Bosch Rexroth Partner training centers 3230 Training session photographs 3331 Registration 3432 Registration / confirmation form 3533 List of companies that participated in our training programme 36-4034 City map
Ahmedabad 41Bangalore 42
35 Bosch Rexroth offices address 43
4
Training Calendar 2010
Month Date Course Course Code Location
January 4th to 8th Industrial hydraulics IH Ahmedabad18th to 20th Continuous control Hydraulics CCH Ahmedabad
February 8th to 9th Axial piston pumps servicing SP08 Ahmedabad15th to 19th Industrial hydraulics IH Ahmedabad17th to 19th Basic concepts of single axis Indra Drive & HMI IND001 Bangalore
March 2nd to 3rd Machine tools hydraulics SP02 Ahmedabad8th to 12th Industrial hydraulics IH Ahmedabad15th to 16th Hydraulic contamination control and maintenance HCCM Ahmedabad22nd to 26th Industrial hydraulics IH Ahmedabad29th to 31st Continuous control hydraulics CCH Ahmedabad
April 5th to 6th Steel mill hydraulics SP01 Ahmedabad12th Hydraulic cylinder SP03 Ahmedabad19th to 23rd Industrial hydraulics IH Ahmedabad21st to 23rd Basic concepts of IndraControl PLC & HMI PLC001 Bangalore26th to 28th Continuous control hydraulics CCH Ahmedabad
May 3rd to 5th Mobile hydraulics MH Ahmedabad7th Road construction machine hydraulics SP13 Ahmedabad10th to 14th Industrial hydraulics IH Ahmedabad24th to 25th Axial piston pumps servicing SP08 Ahmedabad
June 3rd to 4th Plastic machinery hydraulics SP09 Ahmedabad7th to 11th Industrial hydraulics IH Ahmedabad14th Hydraulics for civil engineering applications SP05 Ahmedabad15th Hydraulics for power generation SP04 Ahmedabad16th Excavator and loader hydraulics SP12 Ahmedabad21st to 25th Industrial hydraulics IH Ahmedabad23rd to 25th Basic concepts of single axis Indra Drive & HMI IND001 Bangalore
July 5th to 7th Hydraulics and pneumatics for students HP Ahmedabad12th Crane Hydraulics SP11 Ahmedabad14th to 16th Mechatronics SP14 Ahmedabad19th to 23rd Industrial hydraulics IH Ahmedabad26th to 28th Continuous control Hydraulics CCH Ahmedabad
5
Training Calendar for 2010Contents
Training Calendar 2010
Month Date Course Course Code Location
August 2nd to 3rd Steel mill hydraulics SP01 Ahmedabad4th Press hydraulics SP06 Ahmedabad5th Hydraulics cylinder SP03 Ahmedabad9th to 10th Axial piston pumps servicing SP08 Ahmedabad16th to 20th Industrial hydraulics IH Ahmedabad18th to 20th Basic concepts of IndraControl PLC & HMI PLC001 Bangalore26th Drill rig hydraulics SP10 Ahmedabad27th Foundry hydraulics SP07 Ahmedabad
September 6th to 10th Industrial hydraulics IH Ahmedabad20th to 24th Industrial hydraulics IH Ahmedabad22nd to 24th Basic concepts of multi axis Indra Drive MLD-M & HMI IND002 Bangalore27th to 28th Hydraulic contamination control and maintenance HCCM Ahmedabad
October 4th to 6th Mobile hydraulics MH Ahmedabad11th to 15th Industrial hydraulics IH Ahmedabad20th to 22nd Basic concepts of IndraControl PLC & HMI PLC001 Bangalore25th Power generation hydraulics SP04 Ahmedabad26th Hydraulics for civil engineering applications SP05 Ahmedabad
November 1st to 2nd Plastic machinery hydraulics SP09 Ahmedabad15th to 19th Industrial hydraulics IH Ahmedabad22nd to 24th Continuous control Hydraulics CCH Ahmedabad29th to 30th Axial piston pumps servicing SP08 Ahmedabad
December 1st to 3rd Mechatronics SP14 Ahmedabad6th to 10th Industrial hydraulics IH Ahmedabad13th to 14th Machine tools hydraulics SP02 Ahmedabad22nd to 24th Basic concepts of single axis Indra Drive & HMI IND001 Bangalore20th to 24th Industrial hydraulics IH Ahmedabad27th to 29th Hydraulics and pneumatics for students HP Ahmedabad
Service Tax:Service tax & CESS on service tax for all the courses will be extra on basic fees, as applicable at the time of training/invoicing. Refer annexure for total cost Please send demand draft in favour of Bosch Rexroth (India) Ltd. payable at Ahmedabad accordingly.
6
Training Calendar for 2010Contents
Content< What is ‘Hydraulics’?< Physical fundamentals and principles< Hydraulic components (pumps, motors, cylinders, valves:
directional, pressure, flow; accessories)< Fluid power symbols as per DIN ISO 1219< Basic hydraulic circuits< Instructions, guidance, and review for practical hydraulic
aspects< Techniques of assembly, disassembly and conversion;
possibilities for handling and setting of typical components< Practice by self-trial of circuit making on demonstration
power pack< Instructions on storage, commissioning, trouble shooting,
maintenance and safety< Overview of proportional hydraulic technology
PrerequisitesTechnical knowledge
Participant ProfileOperation, maintenance, assembly and planning personnel, designers and all those interested in Hydraulic Technology
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionTraining manualParticipation certificate
Duration5 days
Timings1st day 10.00-17.00 hrs2nd day to 4th day 09.30-17.00 hrs5th day 09.30-14.30 hrs
EvaluationTest will be conducted post course session.
Training Calendar 2010
Learning Goals< The participants should be able to
understand the physical parameters and symbols, the construction and function of hydraulic components.
< The participants should be able to read, analyse and understand hydraulic circuits.
< The participants should be able to make hydraulic assemblies on the Training Rig.
FeesRs.12,500/- per participant + Service Tax and CESS as applicable
Training CentreAhmedabad
Schedule04.01.2010 to 08.01.201015.02.2010 to 19.02.201008.03.2010 to 12.03.201022.03.2010 to 26.03.201019.04.2010 to 23.04.201010.05.2010 to 14.05.201007.06.2010 to 11.06.201021.06.2010 to 25.06.201019.07.2010 to 23.07.201016.08.2010 to 20.08.201006.09.2010 to 10.09.201020.09.2010 to 24.09.201011.10.2010 to 15.10.201015.11.2010 to 19.11.201006.12.2010 to 10.12.201020.12.2010 to 24.12.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8)
7
Industrial HydraulicsIH
Content< Brief review of conventional valves< Theoretical aspects of proportional hydraulics< Component design of:
- proportional directional, pressure and flow control valves- directional servo and pressure servo valves and electro- hydraulic controls for pumps
< Symbols as per DIN ISO 1219< Electronic controls, PLC applications< Typical continuous control hydraulic circuits< Instruction on commissioning, filtration, maintenance and
servicing(with videos on proportional valves and servo valves) and trouble shooting
< Lab session
PrerequisitesPrior attendance of our Industrial Hydraulics Program or equivalent knowledge otherwise is necessary
Participant ProfileOperating, maintenance, assembly and planning personnel, designers and all those who desire a deeper understanding of electro-hydraulics
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionTraining manualParticipation certificate
EvaluationTest will be conducted post course session.
Learning Goals< The participants should be able to
understand the theory, construction and functioning of electro-hydraulicproportioanl and servo valves.
< The participants should be able to read, analyse and understand typical circuits with proportional and servo valves.
Duration3 days
Timings1st day 10.00-17.00 hrs2nd & 3rd day 09.30-17.00 hrs
FeesRs.10,000/- per participant + Service Tax and CESS as applicable
Training CentreAhmedabad
Schedule18.01.2010 to 20.01.201029.03.2010 to 31.03.201026.04.2010 to 28.04.201026.07.2010 to 28.07.201022.11.2010 to 24.11.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingAdvanced Hydraulics courses (see page 14)
8
Continuous control HydraulicsCCH
Training Calendar 2010
Content< Origins and types of hydraulic
contamination< Hydraulic filtration, beta-value and
cleanliness classes - NAS and ISO< Suction, pressure and return-line filters,
special types of filters such as duplex, spin on etc.
< Special filtration requirements for proportional and servo valves, centrifuges, electrostatic precipitation filters
< Filtration checking devices: Testing kit, continuous monitoring equipment
< Hydraulic fluids: their types, properties, viscosities & temperatures; mixing of fluids, oil-condition monitoring
< Sealing elements< Commissioning, practical hints for
maintenance, and trouble shooting
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< The participants should appreciate and
realize the criticality of hydraulic contamination.< The participants should be able to apply
control technology for the maintenance of a healthy hydraulic system.
Duration2 days
Timings1st day 10.00-17.00 hrs2nd day 09.30-17.00 hrs
FeesRs.7000/- per participant + Service Tax and CESS as applicable
Training CentreAhmedabad
Schedule15.03.2010 to 16.03.201027.09.2010 to 28.09.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingIH/CCH (see page 8)
9
Hydraulic contamination control and maintenanceHCCM
Training Calendar 2010
Content< What is mobile hydraulics?< Hydraulic pumps and motors for mobile
applicationsPumps for open and closed circuits,controls
< Control methods:Throttle control and load sensing control
< Sandwich type mobile control valves, mobile control blocks, safety valves, mobile filters
< Proportional and servo valves for mobile application
< Various types of mobile machines and their typical circuits
< Hydraulic fluids and filtration, maintenance tips and trouble shooting
PrerequisitesBasic hydraulic knowledge
Participant ProfileEngineers and technicians concerned with design, planning, assembly, operation, maintenance, service of mobile machines
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
EvaluationTest will be conducted post course session.
Learning GoalsThe participants should be able to: < understand control types in mobile machines - throttle
and load sensing control< construction and functioning of hydraulic units used
in mobile systems such as pumps, valves, etc.< different types of mobile machines and typical circuits.< fault finding
Duration3 days
Timings1st day 10.00-17.00 hrs2nd & 3rd day 09.30-17.00 hrs
FeesRs.10,000/- per participant + Service Tax and CESS as applicable
Training CentreAhmedabad
Schedule03.05.2010 to 05.05.201004.10.2010 to 06.10.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8)HCCM (see page 9)
10
Mobile hydraulics MH
Training Calendar 2010
ContentHydraulicsFundamentals of hydraulicsHydraulic pumps and motorsControl valvesCylindersCircuit buildingMaintenance
PneumaticsFundamentalsCompressor and compressed airElectro pneumatic conceptCircuit buildingMaintenance
PrerequisitesEngineering student of diploma or degree level
Participant ProfileStudents of undergraduate / post graduate
Teaching and Learning Media< Multimedia presentation< Cut sections< Sample units and power units< PC animations< Circuits Simulation on trainer kit
DistributionCourse materialParticipation certificate
EvaluationTest will be conducted to evaluate learning performance
Learning Goals< Students should be able to understand basics of
Hydraulics and Pneumatics.< Design simple circuits.< Hands on experience on trainer kits.
Duration3 days
Timings1st day 10.00-17.00 hrs2nd & 3rd day 09.30-17.00 hrs
FeesRs.3000/- per participant + Service Tax and CESS as applicable
Training CentreAhmedabad
Schedule05.07.2010 to 07.07.201027.12.2010 to 29.12.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
11
Hydraulics and pneumatics for students HP
Training Calendar 2010
Covered Typical Topics< Introduction to oil hydraulics< Pascal‘s law, Bernoulli‘s theorem,
Reynolds‘s number, etc.< Hydraulic symbols< Various types of hydraulic circuits< Function, operation and design of
pumps, motors, valves, cylinders andaccessories
< Solving problems with hydraulic systems< Trouble shooting: fault finding and
remedial measures
Prerequisite Education/Experience< Equivalent to graduate engineer/diploma
holders with a few years of experience/senior technicians with several years of experience
EvaluationTest will be conducted post course session.
Duration2 days
Number of ParticipantsPreferably limited to 20
FeesRs.60000/- per program including one copy of course material + Service Tax and CESS as applicable
Faculty ExpensesTo & fro economy class air fare or 2nd AC (2-T) train fare where air service not available.
Appropriate lodging, boarding and local transportation to be arranged by the customer.
All charges shall be payable at least two weeks in advance.
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
12
Customized training program in industrial hydraulics at customer’s premises CIH
Training Calendar 2010
Covered Typical Topics< Fundamentals of oil hydraulics in brief< Review of hydraulic symbols; hydraulic
circuitry, including complex circuits< Construction, working and design of
hydraulic units, including variable axial units and their controls
< Proportional and servo valves; logic elements
< Commissioning hydraulic systems; hydraulic fittings, hydraulic oils
< Solving problems with complex hydraulic systems
Prerequisite Education/Experience< Equivalent to graduate engineer/
diploma holders with a few years of experience/senior technicians with several years of experience
EvaluationTest will be conducted post course session.
Duration3 days
Number of ParticipantsPreferably limited to 20
FeesRs.80000/- per program including one copy of course material + Service Tax and CESS as applicable
Faculty ExpensesTo & Fro economy class air fare or 2nd AC (2-T) train fare where air service not available.
Appropriate lodging, boarding and local transportation to be arranged by the customer.
All charges shall be payable at least two weeks in advance.
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
13
Training Calendar 2010
Customized training program in advanced industrialhydraulics at customer’s premises CIHA
Course Content< Hydraulic circuits for equipment specific
to the industry, design criteria,functioning
< Product training specific to the industry< Hands on experience on products like
assembly/disassembly, testing, failureanalysis
< Trouble shooting and maintenance tips
Prerequisite Education/Experience< Equivalent to graduate engineer/
diploma holders with a few years of experience/senior technicians with several years of experience
< Every industry segment wants to know more on hydraulics specific to their field and new development trends, our experts in the field shall impart training and share experience with the group.
< The OEM/end users will find this training ideal for optimum use of equipment.
Number of ParticipantsPreferably limited to 20
14
Objective
The training courses, duration and fees are as follows:
c SP01 Steel mill hydraulics c SP10 Drill rig hydraulicsc SP02 Machine tool hydraulics c SP11 Crane hydraulicsc SP03 Hydraulic cylinders c SP12 Excavator and loader hydraulicsc SP04 Power generation hydraulics c SP13 Road construction machinery hydraulicsc SP05 Hydraulics for civil engineering application c SP14 Mechatronicsc SP06 Press hydraulics c IND Basic Concept of Servo & HMIc SP07 Foundry hydraulics c PLC Basic Concept of PLC & HMIc SP08 Servicing axial piston pumpsc SP09 Plastic machinery hydraulics
Please NoteIf necessary the training course can be conducted at a convenient place other than our training centre, provided the number of participants meets the norm.
Advanced courses for specific industry segment at our training centre
Training Calendar 2010
Content< Hydraulics for various applications like
melting furnaces, rolling mills, AGC, continuous casting, etc.
< Components selection for steel hydraulics:- Pumps- Valves, Proportional & Servo- Accessories
< Servo valves applications for steel mills< Typical circuits and operations< Fluids and contamination control in
steel mills < Trouble shooting and maintenance tips
for steel mills
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain industry specific knowledge of
hydraulic applications and usage.
Duration2 days
Timings1st day 10.00-17.00 hrs2nd day 09.30-17.00 hrs
FeesRs.7000/- per participant + Service Tax and CESS as applicable
Training CentreAhmedabad
Schedule05.04.2010 to 06.04.201002.08.2010 to 03.08.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8)HCCM (see page 9)
15
Steel mill hydraulicsSP01
Training Calendar 2010
Content< Hydraulics for machine tools, various
applications like GPM, SPM, CNC.< Design parameters and products
selection for machine tools:- Pumps- Valves- Electro hydraulic proportional and servo valves- Controls- Filters
< Standard power units- Clamping- Filters
< Trouble shooting and maintenance tips
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain industry specific knowledge of
hydraulic applications and usage.
Duration2 days
Timings1st day 10.00-17.00 hrs2nd day 09.30-17.00 hrs
FeesRs.7000/- per participant + Service Tax and CESS as applicable
Training CentreAhmedabad
Schedule02.03.2010 to 03.03.201013.12.2010 to 14.12.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8)HCCM (see page 9)
16
Learning Goals< To obtain industry specific knowledge of
hydraulic applications and usage.
Machine tools hydraulicsSP02
Training Calendar 2010
17
Content< Types of cylinders
- Tie rod construction- Welded type- Mill duty
< Design criteria of cylinders< Seals selection< Mounting styles < Applications: industrial, mobile, steel plants, servo
cylinders < Trouble shooting and maintenance tips
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain industry specific knowledge of
hydraulic applications and usage.
Duration1 day
Timings10.00 to 17.00 hrs
FeesRs.4000/- per participant + Service Tax and CESS as applicable
Training CentreAhmedabad
Schedule12.04.201005.08.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8)HCCM (see page 9)
Hydraulic cylindersSP03
Training Calendar 2010
Content< Hydraulic applications for power
generation like turbine governor control, oil supply units, etc.
< Typical circuits and design parameters< Component selection for power generation hydraulics
- Pumps- Valves- Servo and proportional valves- Logic elements- Accessories - filters, accumulators, etc.
< Trouble shooting and maintenance tips
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain industry specific knowledge of
hydraulic applications and usage.
Duration1 day
Timings10.00 to 17.00 hrs
FeesRs.4000/- per participant + service tax and CESS asapplicable
Training CentreAhmedabad
Schedule15.06.201025.10.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8)HCCM (see page 9)
18
Hydraulics for Power generationSP04
Training Calendar 2010
Content< Hydraulic applications for civil engineering like
- Hydraulic operated dam gates- Radial gates- Vertical gates
< Typical circuits and design parameters< Component selection for civil engineering application:
- Pumps- Valves- Logic valves- Proportional valves and controls- Cylinders
< Trouble shooting and maintenance tips< Electrical interfacing
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain industry specific knowledge of
hydraulic applications and usage.
Duration1 day
Timings10.00 to 17.00 hrs
FeesRs.4000/- per participant + Service Tax and CESS as applicable
Training CentreAhmedabad
Schedule14.06.201026.10.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8)HCCM (see page 9)
19
Hydraulics for civil engineering applications SP05
Training Calendar 2010
Content< Types of press applications and typical circuits< Design parameters for press hydraulics< Component selection for press hydraulics:
- Pumps- Valves- Logic elements- Proportional valves- Cylinders- Press manifolds
< Trouble shooting and maintenance tips
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain industry specific knowledge of
hydraulic applications and usage.
Duration1 day
Timings10.00 to 17.00 hrs
FeesRs.4000/- per participant + service tax and CESS asapplicable
Training CentreAhmedabad
Schedule04.08.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8)HCCM (see page 9)
20
Press hydraulicsSP06
Training Calendar 2010
Content< Applications of hydraulics in foundry equipment< Typical circuits and design criteria< Component selection for foundry applications:
- Pumps- Valves- Proportional valves and controls- Cylinders- Filters
< Trouble shooting and maintenance tips
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain industry specific knowledge
of hydraulic applications and usage.
Duration1 day
Timings10.00 to 17.00 hrs
FeesRs.4000/- per participant + service tax and CESS as applicable
Training CentreBangalore
Schedule27.08.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8)HCCM (see page 9)
21
Foundry hydraulicsSP07
Training Calendar 2010
Content< Principles of hydraulic pumps and applications< Axial piston pumps:
- Bent axis design- Swash plate design- Various controls DR/DFR/DFLR/DFE, etc.
< Installation tips< Failure analysis and trouble shooting< Assembly, disassembly< Testing and hands on experience in Service Centre
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain knowledge of servicing axial piston pumps< Failue analysis
Duration2 days
Timings1st day 10.00-17.00 hrs2nd day 09.30-17.00 hrs
FeesRs.7000/- per participant + service tax and CESS as applicable
Training CentreAhmedabad
Schedule08.02.2010 to 09.02.201024.05.2010 to 25.05.201009.08.2010 to 10.08.201029.11.2010 to 30.11.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8)HCCM (see page 9)
22
Axial piston pumps servicingSP08
Training Calendar 2010
Content< Applications of hydraulics in plastic machineries like:
- Injection moulding- Blow moulding- Extrusion machine
< Typical circuits and design parameters< Component selection for plastic machineries:
- Pumps- Valves- P/Q controls- Proportional valves- Logic elements
< Axial piston pumps and type of control for power saving modern controls
< Trouble shooting and maintenance tips< Hands-on experience in Service Centre
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain industry specific knowledge of
hydraulic applications and usage.
Duration2 days
Timings1st day 10.00-17.00 hrs2nd day 09.30-17.00 hrs
FeesRs.7000/- per participant + service tax and CESS as applicable
Training CentreAhmedabad
Schedule03.06.2010 to 04.06.201001.11.2010 to 02.11.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8)HCCM (see page 9)
23
Plastic machinery hydraulicsSP09
Training Calendar 2010
Content< Applications of hydraulics in drilling rigs< Component selection:
- Pumps- Mobile valves- Accessories
< Typical circuits and operation< Trouble shooting
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain industry specific knowledge of
hydraulic applications and usage.
Duration1 day
Timings10.00 to 17.00 hrs
FeesRs.4000/- per participant + service tax and CESS as applicable
Training CentreAhmedabad
Schedule26.08.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingHCCM (see page 9)
24
Drill rig hydraulicsSP10
Training Calendar 2010
Content< Applications and types of crane< Circuits of operation
- Open loop- Closed loop- Throttle control- Load sensing/LUDV
< Components selection- Pumps- Control valves- Accessories
< Trouble shooting and maintenance tips
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain industry specific knowledge of
hydraulic applications and usage.
Duration1 day
Timings10.00 to 17.00 hrs
FeesRs.4000/- per participant + service tax and CESS as `applicable
Training CentreAhmedabad
Schedule12.07.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8)
25
Crane hydraulicsSP11
Training Calendar 2010
Content< Application of hydraulics in excavators and loaders< Types of circuits and operations
- Pumps- Control valves- Accessories
< Maintenance tips and trouble shooting
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain industry specific knowledge of
hydraulic applications and usage.
Duration1 day
Timings10.00 to 17.00 hrs
FeesRs.4000/- per participant + service tax and CESS as applicable
Training CentreAhmedabad
Schedule16.06.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingCCH (see page 8HCCM (see page 9)
26
Excavator and loader hydraulicsSP12
Training Calendar 2010
Content< Application of hydraulics in road construction machinery
- Road compactors- Pavers- Concrete mixers
< Concrete pumps< Types of circuits and operation:
- Open loop- Closed loop- Throttle control
< Load sensing/LUDV< Components selection and functioning
- Pumps- Mobile valves- Accessories
< Maintenance tips and trouble shooting
PrerequisitesTechnical knowledge
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit
DistributionParticipation certificate
Learning Goals< To obtain industry specific knowledge of
hydraulic applications and usage.
Duration1 day
Timings10.00 to 17.00 hrs
FeesRs.4000/- per participant + service tax and CESS as applicable
Training CentreAhmedabad
Schedule07.05.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingHCCM (see page 9)
27
Road construction machinery hydraulics SP13
Training Calendar 2010
Content< Overview of hydraulics, pneumatics, electronics< Concept of assembly and conveying systems< Configuring of mechanical equipment and
electronic controls for assembly and conveying systems
< PLC technology and programming
PrerequisitesTechnical knowledge and aptitude for control Technology
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Sample units
DistributionParticipation certificate
Learning Goals< To impart knowledge of mechatronics i.e. combination of
mechanical and electronic systems.
Duration3 days
Timings1st day 10.00-17.00 hrs2nd & 3rd day 09.30-17.00 hrs
FeesRs.6000/- per participant + service tax and CESS as applicable
Training CentreAhmedabad
Schedule14.07.2010 to 16.07.201001.12.2010 to 03.12.2010
Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]
S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Further Recommended TrainingIH (see page 7)
MechatronicsSP14
Training Calendar 2010
28
ContentProgramming & parameterization of IndraDrive in
< Analog mode< Drive controlled Positioning mode< PLC controlled positioning mode (MLD-S)
Operating & programming of HMI< VCP communication with IndraDrive< Screen development
PrerequisitesTechnical knowledge in Electronics
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Sample units
DistributionParticipation certificate
Learning Goals< To impart basic knowledge of
electric drives and controls.
Duration3 days
Timings09.30-16.30 hrs
FeesRs.6000/- per participant + service tax and CESS as applicable
Training CentreBangalore
Schedule17.02.2010 to 19.02.201023.06.2010 to 25.06.201022.12.2010 to 24.12.2010
Information and RegistrationSubbarao D.V.Electric Drives & ControlBosch Rexroth (India) LimitedPlot 96, Phase III, Peenya Industrial Area,Bangalore - 560 058, IndiaPhone: +91 (0)80 41170211Ext. 311Fax: +91 (0)80 28397374Mobile: +91 (0)99 011 00446Email: [email protected]
Further Recommended TrainingIND2 (see page 30)
Basic Concepts of Single Axis Indra Drive & HMIIND001
Training Calendar 2010
29
ContentProgramming & parameterization of IndraDrive using
< PLC controlled positioning mode (MLD-M)< Virtual & Real master< Velocity & Phase synchronization
Operating & programming of HMI< VCP communication with IndraDrive< Screen development
PrerequisitesTechnical knowledge in Electronics
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Sample units
DistributionParticipation certificate
Learning Goals< To impart basic knowledge of
electric drives and controls.
Duration3 days
Timings09.30-16.30 hrs
FeesRs.6000/- per participant + service tax and CESS as applicable
Training CentreBangalore
Schedule22.09.2010 to 24.09.2010
Information and RegistrationSubbarao D.V.Electric Drives & ControlBosch Rexroth (India) LimitedPlot 96, Phase III, Peenya Industrial Area,Bangalore - 560 058, IndiaPhone: +91 (0)80 41170211Ext. 311Fax: +91 (0)80 28397374Mobile: +91 (0)99 011 00446Email: [email protected]
Basic Concepts of Multi Axis Indra Drive MLD-M & HMIIND002
Training Calendar 2010
30
Content< Interface of I/O modules with PLC< Programming of PLC< VCP communication with PLC< VCP Screen development
PrerequisitesTechnical knowledge in Electronics
Participant ProfileOperating, maintenance, assembly and planning personnel, designers
Teaching and Learning Media< Multimedia presentation< Sample units
DistributionParticipation certificate
Learning Goals< To impart basic knowledge of PLC & HMI
controls.
Duration3 days
Timings09.30-16.30 hrs
FeesRs.6000/- per participant + service tax and CESS as applicable
Training CentreBangalore
Schedule21.04.2010 to 23.04.201018.08.2010 to 20.08.201020.10.2010 to 22.10.2010
Information and RegistrationSubbarao D.V.Electric Drives & ControlBosch Rexroth (India) LimitedPlot 96, Phase III, Peenya Industrial Area,Bangalore - 560 058, IndiaPhone: +91 (0)80 41170211Ext. 311Fax: +91 (0)80 28397374Mobile: +91 (0)99 011 00446Email: [email protected]
Further Recommended TrainingIND1 (see page )
Basic Concepts of IndraControl PLC & HMIPLC001
Training Calendar 2010
31
32
VTU GSSS VTU Bosch Rexroth Centre of CompetenceGSSSIETW, K.R.S. Road,Mysore-570 016.Karnataka
Bosch Rexroth Partner training centers
Training Calendar 2010
Central Manufacturing Technology Institute(Govt. of India Society)
Tumkur Road,Bangalore 560 022.
C.V.Raman College of EngineeringBidya Nagar,Mahura, Janla,Bhubaneswar 752 054.Orissa
Sri Jayachamarajendra College of EngineeringManasagangothri,Mysore-570 006.
Karnataka
1. TTT programme for CMTI faculty 2. Training session at Qatar Steel, Qatar
3. TTT programme for C.V.Raman faculty for Pneumatics 4. CCH Lab session at Ahmedabad
5. Hydraulic & Pneumatics training for students 6. Training session at Hindustan Zinc Ltd., Rajasthan
7. Demonstration of pump assembly-Ahmedabad service centre 8. Training session at Welspun, Anjar
Please Note< The enclosed registration format (or photocopy thereof), along with full payment (fees + service tax and
CESS as applicable) in advance by Demand Draft in favor of ‘Bosch Rexroth (India) Ltd.’, Payable at Ahmedabad, must be forwarded at least two weeks in advance and confirmation of registration obtained ten days before the start of the course. The acknowledged confirmation-slip will have to be produced by the participant at the time of joining the program.
< We reserve the right to prepone/postpone/cancel any of the programs, and also to transfer the registration of candidates to another program, for which intimation will be given one week in advance to the candidates to whom written confirmation has been given.
< Our company's PAN "AAACM9898F" dt. 18/02/1974S.T. Regn. No. "AAACM9898FST001" dt. 14/07/2003
< During correspondence for training kindly send us your “address for invoicing” as well as “address for correspondence” separately with all contact telephone and fax numbers.
< Kindly provide following details without fail, once training programme/participation by any of your candidates is finalized.Your company’s TIN No./ DateYour company’s C.S.T.No./ Date Your company’s TAN No./ DateYour company’s PAN No./ Date
Registration
Information & RegistrationS.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]
Training Calendar 2010
34
Registration/Confirmation (Use seperate form for each participant. Photocopies can be used)
Sponsoring company’s nameand address
Participant name: Department:Payment details: DD NO. Dated for Rs.Name, designation & signature of authorized person:Name: Designation:Signature:Mail or fax to: Mr. S.G. Kelshikar, General Manager-SVH
Bosch Rexroth (India) Ltd.Near Vatva Railway Station, Vatva, Ahmedabad - 382 445.Fax No.: 079 6613 2423
PS: Demand draft payable to Bosch Rexroth (India) Ltd. at AhmedabadDate:
Confirmation of Registration:M/s.
For the kind attention of Mr.
We confirm registration ofin the Hydraulic Training Program from to
Please report between 09.30AM to 09.45AM at Training Centre, Bosch Rexroth (India) Ltd., Ahmedabad / Bangalore.
Bosch Rexroth (India) Ltd.
S.G. KelshikarGeneral Manager-SVH
Electric Drivesand Controls Hydraulics
Linear Motion andAssembly Technologies Pneumatics Service
Course Selection:
£ IH : Industrial Hydraulics £ IND1 : Basic concepts of Single axis
IndraDrive & HMI
£ CCH : Continuous Control Hydraulics £ IND2 : Basic concepts of Multi axis
IndraDrive MLD-M & HMI
£ HCCM : Hydraulic Contamination Control & Maintenance £ PLC : Basic concepts of PLC & HMI
£ MH : Mobile Hydraulics
£ HP : Hydraulics and Pneumatics for students
£ SP (Please mention the no. of the course)Course duration: From to Venue: £ Ahmedabad / £ Bangalore
35
List of companies that participated in our training program
Name of company Location
Automobiles
Ashok Leyland Ltd. HosurBajaj Auto Ltd. AurangabadBajaj Auto Ltd. PuneHero Honda Motors Ltd. FaridabadKirloskar Toyoda Textile Machinery Ltd. BangaloreKirloskar Oil Engines Ltd. KolhapurMaruti Udyog Ltd. DelhiTATA Motors Ltd. PuneTATA Automotive Composite(International)Ltd. PuneTVS Motor Company Ltd. Hosur
Ceramics and Cement
ACC Ltd. (Wadi Cement Works) WadiBell Ceramics Ltd. DoraEureka Tiles Ltd. DalpurGrasim Cement Ltd. RaipurGujarat Ambuja Cement Ltd. Kodinar Jaypee Cement Ltd. RewaMadras Cement Ltd. AlathiyurOrient Cement JalgaonRegency Ceramics Ltd. KakinadaSanghi Industries Ltd. (Unit Sanghi Cement) MotiberSPL Ltd. (Unit Somany Tiles) KadiUltra Tech Cemco Ltd. ChandrapurUltra Tech Cemco Ltd. (A.P. Cement Works) TadpatriUltra Tech Cemco Ltd. (GCW) Rajula
Educational Institutes
Army Institute of Technology PuneCentral Manufacturing Technology Institute BangaloreGovernment Polytechnic AhmedabadIndustrial Training Institute, Tarsali VadodaraIndustrial Training Institute, Kubernagar AhmedabadL.D. College of Engineering AhmedabadNational Institute of Engineering MysoreNirma University AhmedabadShri U.V. Patel College of Engineering MehsanaVisvesvarya Technological University BelgumIndian School of Mines DhanabadMEI Polytechnic Bangalore
36
List of companies that participated in our training program
Training Calendar 2010
Name of company Location
General Engineering
Acme Containers NairobiAeronautical Development Establishment BangaloreBirla Cellulosic BharuchCIPET AhmedabadDGP Windsor India Ltd. ChhatralFerromatik Milacron India Ltd. AhmedabadHindustan Aeronautics Ltd. BangloreHMT Ltd. (Press Unit) HyderabadIndian Machine Tools Manufacturers Association MumbaiKirlosker Brothers Ltd. DewasKlockner Desma Machinery (P) Ltd. AhmedabadL&T Demag Ltd. ChennaiLakshmi Machine Works Ltd. CoimbatoreLarsen & Toubro Ltd. (HED) PowaiLuk India Pvt.Ltd. HosurMerit Technologies India Ltd. ChennaiMICO Ltd. NashikMicromatic Grinding Technologies Ltd. GhaziabadNilkamal Plastics Ltd. NoidaNilkamal Plastics Ltd. SilvasaNMHG India Engineering and Support Services Pvt. Ltd. PuneNHPC Ltd. FaridabadNash Robotics and Automation Pvt. Ltd. NasikOil India Ltd. AssamOrdnance Factory AmbajhariOrdnance Factory BhandaraOrdnance Factory KanpurOrdnance Factory KatniOrdnance Factory MedakPolymechplast Machines Ltd. VadodaraPrashant Gamatex Pvt.Ltd. AhmedabadPrince Multiplast Pvt.Ltd. DamanSKF India Ltd. PuneThe Singareni Collieries Co. Ltd. RamagundamThermax Ltd. PuneTrans Impex Pvt. Ltd. MumbaiVIDEOCON Narmada Glass Ltd. BharuchWIDIA India Ltd. BangaloreWindsor Machines Ltd. Ahmedabad
37
List of companies that participated in our training program
Training Calendar 2010
Name of company Location
Mobile Equipment
Apollo Construction Equipments Pvt. Ltd. MehsanaAquarius Engineers Pvt. Ltd. PuneAllcargo Global Logistics Pvt. Ltd. RaigadBharat Earth Movers Ltd. MysoreCaterpillar India Pvt. Ltd. ThiruvallurEimco Elecon (India) Ltd. VidyanagarEscorts Construction Ltd. FaridabadGodrej & Boyce Mfg. Co. Ltd. MumbaiGreaves Ltd. ChennaiIndian Railways JamalpurIndian Railways MumbaiIngersoll Rand India Ltd. BangaloreJCB India Ltd. FaridabadL&T Case Equipments Ltd. PithampurLarsen & Toubro Ltd. KansbahalLarsen & Toubro Ltd. (ECC Division) ChennaiPlasser India Pvt. Ltd. FaridabadPutz Pumps (India) Pvt. Ltd. GoaSchwing Stetter (India) Pvt. Ltd. ChennaiTIL Ltd. Kolkata
Ports
Adani Port Ltd. MundraChennai Port Trust ChennaiGarden Reach Shipbuilders & Engineers Ltd. KolkataGujarat Pipava Port Ltd. RajulaIndian Navy KarwarJawahar Nehru Port Trust Ltd. MumbaiMosaic India Pvt. Ltd. JamnagarNaval Dockyard VisakhapatnamTolani maritime Ins. PuneTTS Handling Systems Mumbai
38
List of companies that participated in our training program
Training Calendar 2010
Name of company Location
Power Genaration
Bharat Heavy Electricals Ltd. Bhopal.Bharat Heavy Electricals Ltd. HardwarBharat Heavy Electricals Ltd. TrichyFouress Engineering (I) Pvt. Ltd. BangaloreGujarat Industries Power Corporation Ltd. Surat Karnataka Power Corporation Ltd. KadraKrishna Bhagya Jala Nigam Ltd. AlmattiNational Hydroelectric Power Corporation Ltd. ChambaNational Hydroelectric Power Corporation Ltd. UriNational Thermal Power Corporation Ltd. FarakkaNational Thermal Power Corporation Ltd. KorbaNational Thermal Power Corporation Ltd. RamagundamNational Thermal Power Corporation Ltd. RihandNeyveli Lignite Corporation Ltd. NeyveliNuclear Power Corporation of India Ltd. KakraparNuclear Power Corporation of India Ltd. TarapurQatar Power Company QatarReliance Energy Ltd. DahanuSatluj Jal Vidyut Nigam Ltd. NathpaTATA Power Corporation RaigadVA Tech Escher Wyss Flovel Ltd. Faridabad
Rubber
Apollo Tyres Ltd. VadodaraArt Rubber Industries Ltd. NashikBridgestone India Pvt. Ltd. PithampurJ K Industries Ltd. (Banmore Tyre Plant) BanmoreLarsen & Toubro Ltd. (LTM Business Unit) Chennai
39
List of companies that participated in our training program
Training Calendar 2010
40
List of companies that participated in our training program
Name of company Location
Steel / Non Ferrous Industries
Automotive Composite Sys. Int. Ltd. PuneBharat Aluminium Co. Ltd. ChhatisgarhBharat Forge Ltd. PuneBhilai Steel Plant (A Unit of S.A.I.L.) BhilaiBokaro Steel Plant (A Unit of S.A.I.L.) BokaroDisa India Ltd. ChennaiDurgapur Steel Plant (A Unit of S.A.I.L.) DurgapurElectrosteel Castings Ltd. KolkataEssar Steel Ltd. HaziraFlat Products Equipments (I) Ltd. MumbaiHindalco Industries Ltd. BelurmathHindalco Industries Ltd. ThaneHospet Steel Ltd. KarnatakaIndian Seamless Steels & Alloys Ltd. JejuryIspat Industries DolviJindal Stainless Ltd. HisarJindal Steel & Power Ltd. RaigarhJothi Malleables Pvt. Ltd. TiruchirappalliJSW Steel Ltd. BellaryKalyani Steels Ltd. PuneKirloskar Ferrous Industries Ltd. BevinahalliM.N.Dastoor & Co. Ltd. JamshedpurMagadh Steel Industries Pvt. Ltd. DewasMECON (India) Ltd. BokaroMishra Dhatu Nigam Ltd. HyderabadNELCAST Ltd. PonneriQatar Steel QatarRatnamani Steels Ltd. ChhatralRourkela Steel Plant (A Unit of S.A.I.L.) RourkelaSalem Steel Plant (A Unit of S.A.I.L.) SalemSaw Pipes Ltd. MundraSAIL (RDCIS) RanchiSAIL(CET) BhillaiSunflag Iron & Steel Co. Ltd. BhandaraThyssen Krupp Electrical Steel India Pvt. Ltd. NashikTISCO Ltd. JamshedpurTower Aluminium Co. Ltd. NigeriaUsha Martin Training Institute JamshedpurVisakhapatnam Steel Plant (A Unit of S.A.I.L.) VisakhapatnamWelspun Gujarat Stahl Rohren Ltd. Bharuch
Training Calendar 2010
For reaching our Training Centre,Ahmedabad city map for your reference
Address : Bosch Rexroth (India) Ltd.Near Vatva Railway StationVatva,Ahmedabad - 382 445
Airport : Ahmedabad (18 Km)
Railway Station : Ahmedabad (10 km), Maninagar (5 km)
City Bus Station : Laldarwaja (12 km)
Local conveyance : Auto, City Bus, Taxi, Train
Charodi
Jagatpur
Cherpur
Gota
Sola
SilajGhatalodia
Memnagar
Thaltej
Bodakdav
Vastrapur
Gujarat University
Gujarat Vidyapeeth
Chandalodia
Kali
Ranip
Sabarmati
Sabarmati Hansol
Kotarpur
Naroda
Kathwada
Nikol
Shastri StadiumShastri Stadium
Ram Rajya Nagar
OdhavOdhav RoadRakhialRoad
Sardar Nagar
KuberNagar
Gujarat Stadium
CampHanuman
KrishnaNagar
New Wadaj
To Gandhinagar
To Mahesana
To Himatnagar
Satellite
Ambli
IIM
PRI Gandhigram
High CourtCPO Daripur
Kasurba Gandhi Rd.
Dudheswar
SabarmatiAsharam
NaranpuraCircuitHouse
HatheesingTample
Asarwa
Saraspur
AHMEDABAD
Gomtipur
Shaking Minarates
Satyamnagar
Amraiwadi
Singarava
Lal Darwaja
Vastral
Gandhi Marg
Old City
GujaratCollage Town Hall
MuscumS. T. Bus Stand
ZooN.I.D.
Ambawadi
Paldi Kankaria LakeBalvatika
L. G. HospitalShah Alam
VasnaVejalpur
Jodhpur
Makarba
Sarkhaj
Gyaspur
Isanpur
Maninagar
Ghodasar
KhokharaMahemdabad
C. T. C.M
Ramol
Vatva
Narol
Vindol
ShahwadiGopalpur
Pipalaj
Lambha
Asalali
To Vadodara
Barejadi
ChandolaLake
Sabrm
ti riv
aa
er
brm
t rive
Sa
a i r
a
Ahmedabad CityNot to Scale
N
41
Training Calendar 2010
For reaching our Training Centre,Bangalore city map for your reference
Address : Bosch Raxroth (India) Ltd.Plot 96, Phase IIIPeenya Industrial AreaBangalore - 360 058
Airport : Bangalore (25 km)
Railway Station : Bangalore (18 km)
City Bus Station : Majestic (18 km)
Local conveyance : Auto, Bus, Taxi
42
Training Calendar 2010
43
Bosch Rexroth (India) Limitedwww.boschrexroth.co.in
AhmedabadNear Vatva Railway Station, Vatva, Ahmedabad - 382 445Phone : +91 (0)79 6613 2388Fax : +91 (0)79 6613 2423
BangalorePlot 96, Phase lll, Peenya Industrial Area, Bangalore - 560 058Phone : +91 (0) 80 4117 0211Fax : +91 (0) 80 2839 4021
DelhiS-10, Green Park Extension, Near Uphaar Cinema,New Delhi - 110 016Phone : +91 (0) 11 2656 6525Fax : +91 (0) 11 2656 6887
Jamshedpur10, Circuit House Area (North), Road No.5, Jamshedpur - 831 001Phone : +91 (0) 657 2222957Fax : +91 (0) 657 2220398
KolkataMerlin Surabhi, 2nd Floor, 8/1/2 Loudon Street(Dr.U.N. Brahmachari Street), Kolkata - 700 017Phone : +91 (0) 33 4002 0175Fax : +91 (0) 33 4002 0199
MumbaiAdvance House, 2nd Floor, Marol Naka, Makwana Road,Andheri (East), Mumbai - 400 059Phone : +91 (0) 22 2856 3290 / 2856 3291Fax : +91 (0) 22 2856 3293 / 4
Pune18/4 & 19/4, Hadapsar Industrial EstatePune - 411 013.Phone : +91 (0) 20 2681 3841 / 42Fax : +91 (0) 20 2681 3844
Training Calendar 2010
Service center
Production
Sales Office
Training center
System Integrator/ sales partners-Not shown-more than 46
Bosch Rexroth (India) Ltd.Near Vatva Railway Station VatvaAhmedabad - 382 445, Indiawww.boschrexroth.co.in
44