2013 ESSS CONFERENCE & ANSYS USERS MEETINGBourbon Atibaia Spa Resort - Atibaia, SP - BrazilApril 23-25, 2013
FINAL PROGRAM
ArgentinaBuenos Aires
April, 16-17
AndeanLima
April, 15-16
ChileSantiago
April 18-19
BrazilAtibaia
April 23-25
®
Organization:
Sponsors:
Academic Challenge Sponsor:
2013 ESSS CONFERENCE & ANSYS USERS MEETING
wELCOME
REGISTRATION
The ESSS CONFERENCE & ANSYS USERS MEETING is the most traditional discussion forum for users of simulation software applied to product development in South America.
During the course of three days, engineers, designers and researchers will have the opportunity to exchange ideas and experiences in Computer Aided Engineering (CAE) and to improve their engineering simulation skills through training courses, software update, plenary sessions, free workshops, user technical presentations, mini-symposia, and ask the expert sessions.
Join us and find out how innovative companies, universities and R&D centers have been applying engineering simulation software to improve processes and reduce their product development cycle time.
Bourbon Atibaia Spa Resort - Atibaia, SP - BrazilApril 23-25, 2013
THE EVENT
• Pre-Conference Training Courses
• Plenary Keynote Speakers
• Software Update
• Free Workshops
• 80+ User Technical Presentations
• Ask the Expert
• Mini-Symposia
• Academic Challenge
www.esss.com.br/usersmeeting
8:00 REGISTRATION OPEN
8:30 TRAINING COURSES
10:00 REFRESHMENTS IN EXHIBITION AREA
10:30 TRAINING COURSES
12:00 LUNCH
14:00 TRAINING COURSES
15:30 REFRESHMENTS IN EXHIBITION AREA
16:00 TRAINING COURSES
17:30 ENd OF 1st dAY
uu April 23
CONFERENCE AT-A-GLANCE
uu April 24 uu April 25
2013 ESSS CONFERENCE & ANSYS USERS MEETING
8:00 REGISTRATION OPEN
8:30 FREE wORKSHOPS
9:30 SOFTwARE UPdATE
10:30 REFRESHMENTS IN EXHIBITION AREA
11:00 OPENING SESSION
11:10 PLENARY SESSION
12:50 LUNCH
14:30 TECHNICAL SESSIONS MINI-SYMPOSIA
15:30 REFRESHMENTS IN EXHIBITION AREA
16:00 TECHNICAL SESSIONS MINI-SYMPOSIA
17:20 ASK THE EXPERT
17:50 CONFERENCE SOCIAL (COCKTAIL)
8:00 REGISTRATION OPEN
8:30 FREE wORKSHOPS
9:30 SOFTwARE UPdATE
10:30 REFRESHMENTS IN EXHIBITION AREA
11:00 PLENARY SESSION
12:30 ESSS ACAdEMIC CHALLENGE AwARd
12:50 LUNCH
14:30 TECHNICAL SESSIONS MINI-SYMPOSIA
15:30 REFRESHMENTS IN EXHIBITION AREA
16:00 TECHNICAL SESSIONS MINI-SYMPOSIA
17:20 ASK THE EXPERT
17:50 CLOSING SESSION (EACH ROOM)
2013 ESSS CONFERENCE & ANSYS USERS MEETING
SOUTH AMERICA REGIONAL SERIES IN NUMBERS
AndeanLima
April 15-16
ArgentinaBuenos Aires
April 16-17
ChileSantiago
April 18-19
BrazilSão Paulo
April 23-25
TEChniCAl PAPERS 20 20 30 80
CoMPAniES ATTEndAnCE 20 25 25 60
UnivERSiTiES / R&d CEnTERS ATTEndAnCE 10 15 10 30
ExPECTEd nUMBER oF ATTEndEES 70 130 100 270
The South America Regional Series will be held in Brazil, Argentina, Chile and Peru. At the end of this conference series, more than 150 companies, universities, and R&D Centers will present a total of 150 user technical papers to approximately 600 attendees in South America.
www.esss.com.br/usersmeeting
Vibroacoustics - Fundamentals and Simulation
Contents: 1. Vibroacoustics Fundamentals:
• Introduction to Vibration;• System of 1 DOF;• Vibrations Control;• Vibration Measurement;• Modal Analysis;• What’s Noise;• Sound Wave Generation and Propagation;• Sound Quantity Units;• dB and dBA Scales;• Noise Effects over the Human Body;• Noise Control;• Noise Measurement.
2. Structural Dynamics and Acoustics Analysis using ANSYS: • Introduction to ANSYS;• Modal Numerical Analysis;• Harmonic Analysis;• Acoustic Boundary Conditions;• Beam Modal and Harmonic Analyses and its Experimental
Validation;• Modal and Harmonic Analyses of a Plate;• Introduction to ANSYS Acoustics Capabilities;• Boundary Conditions;• Modal and Harmonic Analyses of Acoustic Cavity;• Numerical Analysis and Experimental Validation of a Acoustic
Muffler;• Result Analysis and Conclusions.
Instructor: Edmar Baars - VibroacústicaSchedule: April 23Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
2013 ESSS CONFERENCE & ANSYS USERS MEETING
Advanced Technologies with ANSYS Mechanical 14.5
Contents: • Object Generator; • Multizone Meshing; • Sub Modeling; • Explicit to Implicit;• Reactions on Surface;• Result Trackers.
Instructor: Tim Pawlak - ANSYS, Inc.Schedule: April 23Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
Fatigue Analysis Techniques using nCOdE designLife
Contents: • Introduction to Fatigue and nCODE DesignLife;• DesignLife Fundamentals;• Advanced Edit;• Bill of Material;• Multiple Fatigue Analysis Runs;• Batch Jobs;• Virtual Strain Gage;• Spot Weld Fatigue;• Seam Weld Fatigue;• Modal Superposition;• Vibration Fatigue;• Dang Van Multiaxial Fatigue;• Adhesive Bonds;• Short Fiber Composite Materials.
Instructor: Erik Ostergard - HBM nCodeSchedule: April 23Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
TRAINING COURSES
Best Practices for CFd Turbulence Modeling using ANSYS Fluid dynamics
Contents: 1. Turbulence Modeling Overview:
• Characteristics of Turbulent Flows;• Simulation Approaches;• Theory.
2. Reynolds Averaged Navier-Stokes (RANS) models in ANSYS CFD: • Spalart-Allmaras Model;• k-e Family of Models; • k-w Family of Models; • Reynolds Stress Models.
3. Near Wall Turbulence Modeling: • Law of the Wall; • Wall Functions; • Enhanced Wall Treatment; • Implications for Meshing.
4. Transition Modeling: • Transition Models.
5. Hybrid Modeling Approaches: • Hybrid RANS-LES Methods: Motivation; • Detached Eddy Simulation (DES);• Scale Adaptive Simulation (SAS).
6. Large Eddy Simulation (LES): • Motivation; • Theoretical background;• Zonal Methods: Embedded LES (ELES);• Wall Modeled LES (WMLES).
Instructor: Christian Lübon - ANSYS Germany GmbHSchedule: April 23Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
TRAINING COURSES
2013 ESSS CONFERENCE & ANSYS USERS MEETING
Signal and Power Integrity of Electronic Systems
Contents: • Introduction to Signal and Power Integrity;• HFSS Overview;• Simulation Basics;• HFSS for ECAD;• Designer/Nexxim Overview;• QuickEye and VerifEye.
Instructor: Markus Kopp - ANSYS, Inc.Schedule: April 23Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
doE & Sensitivity Analysis
Contents: 1. Deterministic vs Statistical Sensitivity:
• The goal of sensitivity analysis;• Derivatives as local sensitivity;• Statistic approach for sensitivity.
2. Design of Experiments for Numerical Simulation: • Why DoE;• Basic DoE techniques;• Full Factorial Techniques;• Advanced DoE.
3. Robustness & Reliability: • Monte Carlo;• Latin Hypercube;• Taguchi.
4. Variance Decomposition: • Covariance;• Correlation;• ANOVA;• Linear Regression.
5. Data & Sensitivity Analyses: • Numerical Simulation Example - FEA;• Numerical Simulation Example - CFD.
Instructor: Guilherme Jenovencio - ESSSSchedule: April 23Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
2013 ESSS CONFERENCE & ANSYS USERS MEETING
Room piRacicaba itú soRocaba campinas itupeva valinhos
8:30 - 9:00
FLUENT with TGrid Meshing and Mesh Morpher
• TGrid Mesh Generation inside Fluent;
• Mesh Morpher Applications.
instructor: leon White
Reactive Flow and Combustion Simulation
• Finite-rate Volumetric Reaction Models General Concepts;
• Non-premixed Combustion Models;• Premixed and Partially Premixed
Combustion Models;• Best Practices.
instructor: Ana Paula Faria
Advanced Composite Modeling with ACP
• ACP Overview;• Typical Modeling with ACP;• Cylindrical Tank Study.
instructor: Eduardo Araújo
14.5 Enhancements for Contact Modeling
• Trim Contact;• Shell Thickness Effect;• Connection Matrix;• Best Practices and Tips.
instructor: Roberto Silva
Post-processing for Rotary Electrical Machinery
• Maxwell User Defined Outputs (UDO);
• Average & RMS Solutions of Electric Machines;
• Transient d-q Solutions of Electric Machines.
instructor: Diogo Figueiredo
HFSS for ECAd
• HFSS Solver on Demand;• DDR3 Virtual Compliance;• Signal Integrity Analysis;• Launching HFSS from SIwave.
instructor: Juliano Mologni
9:00 - 9:30
Turbomachinery
• New Transient Formulation for Turbomachinery Applications.
instructor: Bruno Contessi
Multiphase Flow
• Discrete Phase Model (DPM) x Eulerian Model;
• Eulerian Models: VOF, Mixture Model, Eulerian-Eulerian;
• Phase interaction: Momentum Transfer;
• Best Practices.
instructor: Rodrigo Peralta
Explicit dynamics for drop Test Analysis
• Meshing Best Practices;• General Setup Recommendations;• Drop Test Analysis Example;• Results Verification.
instructor: Ivan Thesi
workbench 14.5 Ease of Use Tricks
• Object Generator;• Tags;• New Post-processing Features.
instructor: Pedro Cheroto
FEA-EdA Multiphysics Coupling using ANSYS workbench
• Maxwell - Workbench Mechanical 1-Way Coupling;
• Toyota Prius IPM Motor Vibrational Study (2004).
instructor: Diogo Figueiredo
Finite Antenna Array design using HFSS ddM
• Antenna Array Mask;• Composite Excitation;• Domain Decomposition.
instructor: Juliano Mologni
uu April 24
Room piRacicaba itú soRocaba campinas
8:30 - 9:30
CAd/CAE Integration by SpaceClaim
instructor: Roman Walsh
design Optimization
instructor: Guilherme Jenovencio
ANSYS Customization Tool Kit & ANSYS EKM
• ACT Overview;• ACT by Example: Beam Results / Submodeling;• ACT: A Deeper Look;• EKM Overview.
instructors: Luiz Lima / Vinicius Strugata
Multiphysics Analysis of Real Industry Problems
instructor: Juliano Mologni
uu April 25
FREE wORKSHOPS
2013 ESSS CONFERENCE & ANSYS USERS MEETING
SOFTwARE UPdATE
Room piRacicaba itú soRocaba
9:30 - 10:30
ANSYS Fluid Update
Christian Lübon ansYs Germany Gmbh
ANSYS Electromagnetics Update
Markus Kopp ansYs, inc.
ANSYS Structural Update
Tim Pawlak ansYs, inc.
uu April 24
Room piRacicaba itú soRocaba
9:30 - 10:30
modeFRONTIER Update
Nader Fateh esteco
nCOdE Update
Erik Ostergard hbm ncode
ANSYS workbench Update
Sanjay Angadi ansYs, inc.
uu April 25
PLENARY SESSION
Room londRina
11:00OPENING SESSIONClovis Maliska Jr. - ESSSPresident
11:10
Barry Christenson - ANSYS, Inc. Director of Product Management
“ANSYS Corporate and Product Road Map”
11:40
José Luiz Albertin - ABNT CB05Chief of Secretariat
“Globalization and Competitiveness. Standards Allow Go Faster”
12:10
Flávia Pacheco Teixeira da Silva - Petrobras/CenpesReservoir simulation and evaluation
“Technology Challenges at Petrobras: Vision for Geoengineering and Well Engineering”
Room londRina
11:00
Rogério Amaury de Medeiros - FINEP - MCTIchief of department of monitoring, evaluation and information management
“Innovation in Brazil - Inova Empresa Program”
11:30
Paulo de Mattos Pimenta - USPdepartment of structural and Geotechnical engineering
“Fluid Dynamic and Structural Finite Element Analysis of the Brasília National Stadium”
12:00
Eduardo Alves Cardoso - Electrolux do Brasil S.AFood Preservation and Air Care R&D Laboratory Manager Global Leader of Networking Simulation Module - CFD
“Simulation Technology by Electrolux”
uu April 24 uu April 25
2013 ESSS CONFERENCE & ANSYS USERS MEETING
2013 ESSS CONFERENCE & ANSYS USERS MEETING
Room piRacicaba itú soRocaba campinas itupeva valinhossession
chairmanAutomotive Fabiano Diesel
Appliances José Anchieta
Metals & Mining Nicolas Spogis
Power Generation Armando de Souza
Marine & offshore Roberto Silva
Chemical Process Andressa Ribeiro
14:30 Modeling Strategies for Explicit Simulation of Balistic impactsLuiz Lima - ime / esss
Acoustic and Fluid dynamic Performance of industrial MufflersCelso Kenzo - vibroacústica - eletrodb
Computational Analysis of the Cooling of Rolls Used in the Transport of Slabs From Continuous CastingLeonardo Camilo dos Reis - usiminas
Fluid Mechanic Relationship in a Francis Runner TurbineMichelle Abreu - andritz
Structural Study of an ocean Racing Trimaran Using Finite Element MethodThiago Pontin Tancredi - usp
Turbulent Free Surface and dispersed Phase Flow in Stirred Tank: voF and ASM ApproachDaniel da Cunha Ribeiro - uFes
14:50 non-linear Structural Analysis of Automotive Component Assembled by Pin FixtureWiliam Tean Su - thyssenKrupp
vibroacoustic Analysis of the Ressonance Box of a viola CaipiraJosé M. Campos Dos Santos - unicamp
Fatigue Analysis of CvC-Type Rolling Mill RollsYukio Shigaki - ceFet-mG
Evaluation of Actuating discs in horizontal Axe Wind Turbines with CFdJosé Leandro Rosales Luz - ste
Modeling of the Wind Flow Action over offshore Structures with Application on a FPSo helideckWilques W. Ferreira Pinheiro - solitons
Energy and Momentum Transfer Analysis of a distillation Column Sieve Tray for an Ethanol-Water System Using CFd TechniquesGabriel Henrique Justi - uFscar
15:10 Brake Squeal AnalysisFabiano Diesel - Fras-le / esss
Study of the dynamic Behavior of the vRU CompressorDanuza Santana Dias - sKF
ore Blocks Restraint Structures in Crushing PlantsJose Cléber Rodriges da Silva - vale
Structural Control of a Wind Turbine Using a Tuned Mass damper via Finite Element MethodSuzana Moreira Avila - unb
Finite Element Analysis Parameterization - Structural Analysis of ReelsThiago Pontual - technip
Simulation of a Water Spray System in Process vesselFabio Nader Azar - safetyeng
15:30 REFRESHMENTS IN EXHIBITION AREAsession
chairmanAutomotive & Aerospace Fabio Yukio
Appliances Ivan Thesi
Civil & health Eduardo Araújo
Power Generation Luiz Lima
Marine & offshore Raphael David
oil & Gas - CFd João Aguirre
16:00 on the deployment of a Gliding BombMateus Gomes Filgueiras - magnaghi Friuli aeroespace
Active Control of a Beam Structure Using Piezo-electric Actuators in AnSYSAureliano R. Barborati Ribeiro - uniFei
numerical and Experimental verification of the Point of Enchasing of orthopedic Pins depending on the Method of AttachmentAlfonso Pappalardo Junior - mackenzie
Underhood Thermal Management Using CFdArmando de Souza - agrale / esss
numerical Simulation of Self-propelling Essay of a displacement hullAlexandre Teixeira de Pinho Alho - uFRJ
CFd Analysis of Transient Temperature Profile in Coke drums with different Feed nozzles ArrangementsMariana Nogueira Dantas - esss
16:20 CFd Applied to the Simulation of a Cylinder-piston AssemblyDarlan Costa Porto - uGF
Thermal Shock Stress Analysis of Flexible Printed Boards considering the Solders Joints of Electronic Components using AnSYSLuciano Arruda - inst. nokia de tecnologia
Fatigue Analysis of a Simple Shaft under Combined Bending and TorsionEduardo Araujo - esss
numerical Analysis of the Effects of Cross-Section variation of Microchannels in Single-phase laminar FlowFabiano da Rosa Hollweg - unisinos
CFd Simulations for Environmental loads on a Supply BoatDaniel Fonseca de C. e Silva - petrobras
Prediction of hydrodynamics and Efficiency of a distillation Sieve Tray by CFd SimulationGladson Cintra de Oliveira - uFscar
16:40 Tosca - virtual CAELeandro Garbin
SGiAndré Gardinalli
MaterialiseDaniel Almeida
next EngineMarcos Langeani
nvidiaMarcio Aguiar
17:00 Frequency Response Functions of an Automotive Chassis (Body in White)Celso Kenzo - vibroacústica - Fiat
Workbench, APdl and one Unusual Finite Element ApplicationMarcos G. Dropa de Bortoli - embRaco
Finite Element Analysis of dynamic Behavior of Stadium StandsCarlos Alberto Medeiros - vale
Comparative Study of Calculation Methods of hydraulic Turbine’s Wicket GatesEduardo Koichi Iha - andritz
Buckling in a Semi-Submersible: A Parametric Analysis and Mass optimizationThiago Pontin Tancredi - usp
The Rule of Comprehensive Modeling for Kraft Chemical Recovery BoilerDaniel José de Oliveira Ferreira - usp
17:20 Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert
USER TECHNICAL SESSIONS
uu April 24
2013 ESSS CONFERENCE & ANSYS USERS MEETING
USER TECHNICAL SESSIONS
Room piRacicaba itú soRocaba campinas itupevasession
chairmanAppliances Martin Kessler
oil & Gas - FEA Roberto Silva
oil & Gas - CFd Andressa Ribeiro
Electronics Juliano Mologni
Materials Michele Mendes
14:30 Multidisciplinary optimization of Axial ventilation holes for Medium voltage induction MotorsRafael S. Barbetta - WeG equip. elétricos s.a.
“in-Situ” Repair of Tubular Casings of offshore Structures PumpsGilson Gomes da Silva - petrobras
CFd Simulation of a Circulating Fluidized Bed Gasifier With heat TransmissionMarcelo Ricardo Q. Medeiros - petrobras
high Frequency digital Connections using hFSS Software PlatformVanessa Przybylski Ribeiro Magri - puc-RJ
Study of the interface Effects on Glued laminated Beams Subjected to lateral-Torsional BucklingAlfonso Pappalardo Junior - mackenzie
14:50 CFd validation with ASME v&v 20 - Total Frost Free RefrigeratorHugo Flávio Benassi Zanqueta - electrolux
Analysis of a Polymeric insert With Metallic Core For Bend Stiffener AdaptorsAnderson Cunha dos Santos - Ge
Modeling Salt Wall dissolution due to Flow in the Well-drilling Column Annular Channel using AnSYS FluentJoão Aguirre - esss
Transient Analysis of a dual Polarization log-periodic Antenna for Remote Sensing ApplicationsIgor Feliciano da Costa - inatel
design of Multilayer Radar Absorbing Materials (RAM) by Evolutionary optimizationRafael Jorge Port - cta/iae
15:10 The Effect of Thermodynamic Properties on Reciprocating Compressors Effective AreasDiogo Lôndero da Silva - embraco
Modal Analysis of a Suction vessel of a Reciprocating CompressorsLuis Guilherme T. Silveira Leite - petrobras
Use of Adaptive Mesh Simulation for Gaseous Effluent dispersionMarcelo Rocha Martinelli - petrobras
Electromagnetic Simulation of open TEM Cell for Compatibility TestingGustavo Maciulis Dip - esss
integrating Materials data Management with CAE using AnSYS Workbench as an ExampleGustavo Olivella - Granta design
15:30 REFRESHMENTS IN EXHIBITION AREAsession
chairmanAppliances Armando de Souza
oil & Gas - FEA Luiz Lima
oil & Gas - CFd João Aguirre
Electronics Juliano Mologni
Marine & offshore Eduardo Araujo
16:00 Methodology of Gas injection Analysis in a Metallurgical deviceLeonardo Cruz Arantes Campos - magnesita
Submodeling in AnSYS Workbench 14.5Roberto Silva - esss
Flow Field Analysis to improve a liquid/liquid Separator vessel design using CFdRodrigo Peralta - petrobras
Use of Ansoft Maxwell for investigation of Electrostatic Properties of a hemisphere on a Post Geometry Aimed to Model vacuum Field Emission devicesDavi Sabbag Roveri - unicamp
Analysis and design of a Flange Cover Using Fluid Structure interactionCarlos Eduardo Reuther de Siqueira - petrobras
16:20 modeFRonTiER as a design Tool for Compressors Suction SystemsTalita Wajczyk - embraco
Building Finite Element Meshes for Elliptical Cracks in nozzles’ WeldsLeandro Schiara - uFmG
CFd Simulation of a Circulating Fluidized Bed Gasifier Cold Physical ModelMarco Antonio Haikal Leite - petrobras
Rotor-Stator Electromagnetic Radial Force and Shaft deformation for a hermetic CompressorFlavio Kalluf - embraco
A Parametric Model of Evaluate the Stress in Mooring linesThiago Pontin Tancredi - usp
16:40 Granta designGustavo Olivella
PlanusJoão Carlos Lopes
Creative SolutionsGuilherme Tondello
RFid Tags Power Reduction Without Area PenaltiesFernando Herrmann - smdh
Study of Composite Pressure vessel using Workbench and APdl Eduardo Araujo - esss
17:00 Using dx to optimize the CFd Parameters Calibration ProcessCassiano A. Cezario - WeG equip. elétricos s.a.
Efficiency Evaluation of Stress Relief holes for Cracks in offshore Structures’ hullsGilson Gomes da Silva - petrobras
numerical Simulation of a Rotary dryer Using Granular Multiphase Model and Moving MeshRaphael Bacchi - esss
EMC Simulation for Washing MachinesGerson Eguni - Whirlpool
Structural Analysis of Pressure vessel Fully Wrapped of Composites to Storage nGvFernando F. M. C. de Guamá - Fmc technologies
17:20 Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert
uu April 25
2013 ESSS CONFERENCE & ANSYS USERS MEETING
MINI-SYMPOSIA
Room oFFice 1session
chairmanEsterel Technologies Tony Karam / Bernard Dion
14:30 Systems and Embedded Software Engineering with SCAdE
• Esterel introduction and operations in latin America
• Systems and Embedded Software with SCAdE Technical Presentation
15:30 REFRESHMENTS IN EXHIBITION AREAsession
chairmanEsterel Technologies Tony Karam / Bernard Dion
16:00 - 17:50
Systems and Embedded Software Engineering with SCAdE
• SCAdE Technical demo
• xMoBoT User Presentation (UAv Ground Control Station) with SCAdE
uu April 24
uu April 25
Room oFFice 1 oFFice 2session
chairmanMining Nicolas Spogis
Multidisciplinary optimization Rodrigo Ferraz
14:30 • The Key Rollplay of Simulation on Mining Processes & Equipment design Hellinton Andrade - business director - Blue Ocean
• ESSS/Rocky (dEM) Advanced Applications - CFd Coupling and FEA Coupling Alex Potapov - Conveyor Dynamics Inc.
• optimization of Complex Systems: Challenges on Aeronautical industry Alexandre Antunes - mdo team coordinator - Embraer
15:30 REFRESHMENTS IN EXHIBITION AREAsession
chairmanMining Nicolas Spogis
Multidisciplinary optimization Rodrigo Ferraz
16:00 - 17:50
• CAE Applied for Mining industry - dEMo & Examples Nicolas Spogis - business manager - ESSS
• Engineering Applications of Multidiscplinary optimization Nader Fateh - vp business development - Esteco
• Multidisciplinary Systems design optimization (M.S.d.o.): The next Frontier in the Technical Management of Complex Projects Sérgio Butkewitsch Choze - director - WebSolvers
2013
2º DESAFIO ESSS DE MODELAGEM COMPUTACIONAL
2013 ESSS CONFERENCE & ANSYS USERS MEETING
ESSS and Electrolux are pleased to invite all conference participants to visit the poster session at the foyer (Piso E) on April 24 and 25, 2013. The challenge was created with the objective of promoting the exchange of ideas and experiences between academia and industry.
In this 2nd edition, ESSS will count with the important contribution of Electrolux do Brasil S.A., a multinational company which is global leader in household and professional use appliances and equipments.
The competition consists of proposing an engineering problem solution through the use of computational simulation software provided by ESSS.
uu CHALLENGE wINNERS ANNOUNCEMENT
Winners will be announced at the end of the Plenary Session on Thursday, April 25, 2013.
ESSS COMPUTATIONAL MOdELING CHALLENGE: 2nd EdITION
uu SPONSOR
VENUE
Special daily rate for 2013 ESSS Conference & ANSYS Users Meeting.
Single Room: R$ 470,00 Double Room: R$ 580,00
SPECIAL RATES
BOOKING
A limited number of rooms at reduced rates is being held for attendees. Please contact Valencia Agência de Viagens e Turismo Ltda. for more details.
E-mail: [email protected] Phone: (11) 3111-2454 / (11) 9621-6875
BOURBON ATIBAIA SPA RESORT
2013 ESSS CONFERENCE & ANSYS USERS MEETING
INFORMATION ANd REGISTRATION
www.esss.com.br/usersmeetingE-mail: [email protected] São Paulo: +55 (11) 3046-5744 | Rio de Janeiro: +55 (21) 3293 1300 | Florianópolis: +55 (48) 3953 0000
Rod. Fernão Dias, s/n Km 37,5 - Atibaia - SP - BrazilGrande São Paulo: +55 (11) 4414 4700 Other Locations: 0800 703 40 41 www.bourbon.com.br
SHUTTLE SERVICE
From Airports to the Hotel*:
April 22 - under consultingApril 23 - 7:00, 7:20 and 7:40hApril 24 - 7:00, 7:20 and 7:40hApril 25 - 7:00, 7:20 and 7:40h
From Hotel to Airports*:
April 23 - 18:00April 24 -18:00 and 20:00hApril 25 - 18:30h
*Price per Shuttle and Person: R$ 50,00
INFORMATION ANd BOOKING