Date post: | 17-Jul-2016 |
Category: |
Documents |
Upload: | david-baillon-opazo |
View: | 3 times |
Download: | 1 times |
Syst
emai
r bo
x fa
ns K
VD
, KV
B, K
PB
www.systemair.com
2
KVD (direct driven) and KVB (belt driven) from sizes 7/7 to 12/12 are a range of single skin supply or extract box fans for inline application. These fans are designed for cost effective installations with low to medium pressure drop whilst keeping very good sound performances.
• KVD – Double inlet Direct Driven range with airfl ows from 700 to 7500 m3/h, IP 54 Class Motors single phase except 12-12-D6 three phase.
• KVB – Double inlet belt driven range with airfl ows from 700 to 13 000 m3/h IP 55 Class F motors.
Features & benefi tsRobust and quiet opera-tion thanks to the galvanized steel fan and motor support mounted on 4 anti-vibration rubber plots. Outlet connected to the casing through an 18 mm thick rubber joint acting as a fl exible seal. Reinforced bottom panel
giving the box fan more stability and mechanical resistance. Indoor and outdoor installation with the same standard unit. Easy to install with motor wired to the IP 55 connection box. KVB and KVD have a round inlet and square outlet. Effi cient double inlet galvanized steel forward curved impeller balanced stati-cally and dynamically. The KVB and KVD have a 3 year warranty. Airfl ows up to 50 000 m3/h are available upon request. Operates with air up to 50°C. Belt driven KVB range is available for three phase 60 Hz opera-tion.
AncillariesOutlet rain hood with bird net, ORHIntake silencer, LDCFast clamp, FKBack draft damper, RSKMaintenance switch, REVPressure switchAnti-vibration mount
Casing in galvanized steel with standardroof and feet for outdoor installation
KVD – KVB
3
KVB Belt driven IEC Motor IP 55 F Class
Motor kW Max V Hz Motor Wiring Wiring Weight (kg) kW Amp
Min - Max m3/h r.p.m 1 speed 2 speed Min - Max
7/7 0.25 - 0.55 2800 400 50/60 1450 13a 14a 32 - 37 0.25 0.8
9/7 0.25 - 1.1 4100 400 50/60 1450 13a 14a 44 - 52 0.37 1.1
9/9 0.25 - 1.1 4500 400 50/60 1450 13a 14a 45 - 53 0.55 1.5
10/8 0.25 - 1.5 5100 400 50/60 1450 13a 14a 50 - 59 0.75 1.9
10/10 0.25 - 1.5 6200 400 50/60 1450 13a 14a 54 - 60 1.1 2.6
12/9 0.25 - 2.2 6800 400 50/60 1450 13a 14a 71 - 87 1.5 3.5
12/12 0.25 - 2.2 9000 400 50/60 1450 13a 14a 73 - 89 2.2 4.9
KVD Direct driven
SizeWatts Max m3/h A
(max m3/h)V/Hz r.p.m max IP Wiring
diagramLpa 1m Weight
(kg)
7-7-E4 (146 W) 146 1700 2.2 230/50 1410 54 1 58 20
7-7-E6 (73W) 73 1685 1.1 230/50 880 54 1 54 20
9-7-E4 (373W) 370 2750 4 230/50 1410 54 1 61 30
9-7-E6 (237 W) 237 2510 2.5 230/50 950 54 1 59 30
9-9-E4 (550 W) 550 3150 5.9 230/50 1450 54 1 64 32
9-9-E6 (237 W) 237 2590 2.4 230/50 950 54 1 61 31
10-8-E6 (237 W) 237 2550 3 230/50 950 54 1 63 35
10-10-E4 (550W) 550 3250 6 230/50 1425 54 1 66 37
10-10-E6 (237W) 237 2700 3.1 230/50 950 54 1 63 36
10-10-E6 (550W) 525 4825 5.7 230/50 950 54 1 65 42
12-9-E6 (736W) 736 4820 8.5 230/50 950 54 1 62 50
12-12-E6 (525W) 525 4400 6.4 230/50 950 54 1 64 50
12-12-E6 (736W) 736 5750 9.8 230/50 910 54 1 67 52
12-12-D6 (1380W) 1380 7150 5.1 400/50 925 54 13a 71 52
Technical dataG
reen
/yel
low
Bla
ck
Deltaconnection
Starconnection
Wiring 1. 230V Single speed
Wiring 13a.400V Single speed
Blu
e
Electrical wiring
Wiring 14a.400V Two speed
4
KVD Direct driven single skin
A A’ A’’ B B’ C D E øF
7-7 498 458 454 457 415 442 273 253 200
9-7 548 508 504 507 465 532 336 304 250
9-9 548 508 504 507 465 532 336 304 250
10-8 648 608 604 607 565 592 371 330 300
10-10 648 608 604 607 565 592 371 330 300
12-9 698 658 654 657 615 642 434 382 350
12-12 698 658 654 657 615 642 434 382 350
A''
A
A'
FE
Dimensions KVD & KVB
KVB Belt driven single skin
A A’ A’’ B B’ C D E øF
7-7 598 558 555 457 412 441 273 253 250
9-7 748 708 705 562 512 541 336 304 300
9-9 748 708 705 562 512 541 336 304 300
10-8 798 758 755 657 612 591 371 330 350
10-10 798 758 755 657 612 591 371 330 350
12-9 948 908 905 812 762 691 434 382 400
12-12 948 908 905 812 762 691 434 382 400
B'
øF
B
D
C
All dimensions in mm
5
The KPB from size 15/11 to 18/18 are a range of supply or extract box fan for inline or 90° application. The casing is made of an aluminum frame with single skin or double skin galvanized steel pan-els. These fans are designed for indoor and outdoor installations with low to medium pressure drop whilst keeping very good sound performances.
• KPB – Double inlet belt driven range with airfl ows from 10 000 to 19 500 m3/hIP 55 F Class IEC motors (380 V 50 and 60 Hz).
• Suitable for operating temperatures of up to 50°C.
Features & benefi tsRobust and quiet operation thanks to the galvanized steel fan and motor support mounted on 4 anti-vibration rubber plots.
Low noise level: Anti-vibration rubber adjustable feet are fi tted below the fan casing. Outlet connected to the casing through an 18 mm thick rubber joint acting as a fl exible seal. Quality casing with aluminum profi le structure, plastic corners, M1 fi re rated 15 mm isolation through polyurethane foam. Easy access: A maintenance access door on the side is fi tted with polyamide hinges and ¼ turn lock and key. Easy to install with motor wired to the IP 55 connection box. Effi cient double inlet galvanized steel forward curved impeller balanced stati-cally and dynamically. Inlet panel of KPB is to be ordered
with rectangular inlet, damper or closed. The outlet is square. The KPB have a 3 year warranty. On request, the KPB are available with:- PVC Coating for sea-side location- Double skin panels- EU4 Filter guided through rails for
easy maintenance and fi tted inside the casing (with pressure sensor as an op-tion).
AncillariesOutlet/inlet rain hood with net, ORH/IRHEU4 Filter Weather roof, WSDMaintenance switch, REVDamper (manual/motorized)Pressure switch
Special executionsTwin fans (page 13-14)60 Hz three phase
Casing with aluminium profi le15 mm polyurethane foam isolationKPB
6
Inlet options
KPB Belt driven Manual damper Rectangular inlet
A B C D E F L Length H Height L Length H Height
DA 15-11 1000 950 800 508 443 128 800 672 890 740
DA 15-15 1000 950 800 508 443 128 800 672 890 740
DA 18-13 1150 1100 1000 594 518 120 900 800 1000 900
DA 18-18 1150 1100 1000 594 518 120 900 800 1000 900
Dimensions
Wiring diagram
B
D
A
EF
C
IEC Motor IP55 F Class
1 speed 2 speeds
kW Amp kW
4/8 poles
0.25 0.8 –
0.37 1.1 –
0.55 1.5 0.55/0.09
0.75 1.9 0.75/0.12
1.1 2.6 1.1/0.18
1.5 3.5 1.5/0.25
2.2 4.9 2.2/0.37
3 6.7 3/0.55
4 8.4 4/0.75
5.5 11.3 5.5/1.1
7.5 14.8 7.5/1.5
KPB Belt driven
Motor kW Max m3/h V Hz Motor r.p.m. Weight (kg)
Min - Max Min - Max
15/11 0.25 - 3 9500 400 50/60 1450 98 - 122
15/15 0.25 - 3 12800 400 50/60 1450 112 - 136
18/13 0.25 - 7.5 15500 400 50/60 1450 130 - 180
18/18 0.25 - 7.5 19500 400 50/60 1450 139 - 189
Technical data
All dimensions in mm
Deltaconnection
Starconnection
Wiring 13a.400V Single speed
Wiring 14a.400V Two speed
7
Accessories
Pressure switchORH, outlet rain hood with bird netIRH, inlet rain hood with bird net
REV, maintenance switch
Damper
LDC, silencer FK, fast clamp
RSK, back draught damperFilter
8
10
20
30
40
50
60
150140130120110100
90
80
70
70504030201054321pd (mm H O)2
C (m/s)2 302015105432
310046%
η50% 49%
45%
39%
800
1000
1200
1400
1600
1800
2000
2200
2400
2800
500 000500040003000200510001052V(m /h)3
7-7
10
20
30
40
50
60
150140130120110100
90
80
70
70504030201054321pd (mm H O)2
C (m/s)2 30 402015105432
60% 67% 70% 69% 63%53%
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1800
2000
2400
1000 1500 0000100080006000400030002005V(m /h)3
η
9-9
10
20
30
40
50
60
150140130120110100
90
80
70
70504030201054321pd (mm H O)2
C (m/s) 4030201510543
2000
2400
59%65% 67% 65% 60%
51%
700
600
800
900
1000
1100
1200
1300
1400
1600
1800
1000 1500 0000100080006000400030002005V(m /h)3
η
9-7
10
20
30
40
50
60
150140130120110100
90
80
70
70504030201054321pd (mm H O)2
C (m/s) 30 402015105432
60%66%
69%68%
62%
52%
600
700
800
900
1000
1100
1200
1300
1400
1700
1800
2200
1600
1500
1000 1500 0000100080006000400030002005V(m /h)3
η
10-8
Selection curves KVB (Belt driven)
NOT USABLENOT RECOMMENDEDNOT RECOMMENDED
NOT USABLENOT RECOMMENDEDNOT RECOMMENDED
NOT USABLENOT RECOMMENDEDNOT RECOMMENDED
NOT USABLENOT RECOMMENDEDNOT RECOMMENDED
9
10
20
30
40
50
60
150140130120110100
90
80
70
70504030201054321pd (mm H O)2
C (m/s)2 302015105432
60%64%
65%62% 56%
47%
600
700
800
900
1000
1100
1200
1400
1500
1600
1300
1700
1800
2200
1000 1500 0000100080006000400030002005V(m /h)3
η
10-10
10
20
30
40
50
60
150140130120110100
90
80
70
65%69%
68% 60%
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1800
70504030201054321pd (mm H O)2
C (m/s)2 30 402015105432000 30001000 1500 4000 6000 8000 10000 15000 20000V(m /h)3
η
12-12
10
20
30
40
50
60
150140130120110100
90
80
70
72%
74%73% 67%
56%
800
700
600
500
900
1000
1100
1200
1300
1400
1600
1800
70504030201054321pd (mm H O)2
C (m/s)2 30 402015105431500 2000 000410000100080006000400030001057V(m /h)3
η
12-9
Selection curves KVB (Belt driven)
NOT USABLENOT RECOMMENDEDNOT RECOMMENDED
NOT USABLENOT RECOMMENDEDNOT RECOMMENDED
NOT USABLENOT RECOMMENDEDNOT RECOMMENDED
10
Selection curves KPB (Belt driven)
10
20
30
40
50
60
150140130120110100
90
80
70
58%64% 65%
62% 54%
400
500
600
700
800
900
1000
1100
1200
1400
70504030201054321pd (mm H O)2
C (m/s)2 30 402015105433000 4000 000030000200051000010008000600020051V(m /h)3
η
15-15
NOT USABLENOT RECOMMENDEDNOT RECOMMENDED
40002000 3000 8000 1500010000 0000400003000020006
10
20
30
40
50
60
150140130120110100
90
80
70
73%70% 63%
52%
300
350
400
450
500
600
700
800
900
1000
1200
70504030201054321pd (mm H O)2
C (m/s) 30 40201510543V(m /h)3
η
18-13
NOT USABLENOT RECOMMENDEDNOT RECOMMENDED
40002000 3000 8000 1500010000 0000400003000020006
10
20
30
40
50
60
150140130120110100
90
80
70
70%73%
71%64%
350
400
450
500
600
700
800
900
1000
1200
70504030201054321pd (mm H O)2
C (m/s)2 30 40201510543V(m /h)3
η
18-18
NOT USABLENOT RECOMMENDEDNOT RECOMMENDED
10
20
30
40
50
60
150140130120110100
90
80
70
64% 66%
64% 58%
400
500
600
700
800
900
1000
1100
1200
1400
70504030201054321pd (mm H O)2
C (m/s) 30 4020151054322000 30001000 1500 4000 6000 8000 10000 15000 20000V(m /h)3
η
15-11
NOT USABLENOT RECOMMENDEDNOT RECOMMENDED
11
Selection curves KVD
Do not select dotted area Do not select dotted area
Do not select dotted area
12
Selection curves KVD
E6 (237W)
E6 (237W)
E6 (525W)
E6 (525W)
E6 (525W)
E6 (525W)
E6 (736W)
E6 (736W)
D6
D6
E6
E6
Do not select dotted area
13
The KP DUO is a range of acoustically treated in-line centrifugal twin fans for internal and external mounting with alu-minum profi le casing. The direct driven KPD DUO ranges from 700 to 7000 m3/h while the standard range belt driven KPB DUO reaches 19 500 m3/h. Static pressures up to 700 Pa. A rectangular inlet and outlet allow an easy connection to ducts avoiding sudden pressure loss. 9 sizes are available from 450 to 1000 mm height. Suitable for operations up to 50°C.
Features & Benefi tsQuiet operation• Aluminum profi le heavy duty casing with 15 mm isola-tion on galvanized steel panels
• Fan and motor supported on a metallic frame with built in vibration isolation
Quality impellers and motors• Highly effi cient forward curved double
inlet galvanized steel impeller.
• IP 55 F Class motors, belt driven (three phase). Direct drive IP 54F Class single phase except 12-12-D6.
Easy installation & maintenance• IP 55 wired connection box for easy
wiring of the two motors.
• Maintenance access door with lock and key.
Special execution60 Hz three phase
Performances curvesBelt driven see page 8-10Direct driven see page 11-12Wiring diagrams page 3
WarrantyKP DUO twin fans have a 3 year war-ranty.
KP DUO
14
KPB DUO Belt driven A B C D E
7/7 600 900 450 840 390
9/7 700 1100 550 1040 490
9/9 700 1100 550 1040 490
10/8 750 1300 600 1240 540
10/10 750 1300 600 1240 540
12/9 900 1600 700 1540 640
12/12 900 1600 700 1540 640
15/11 1000 1900 800 1840 740
15/15 1000 1900 800 1840 740
18/13 1150 2200 1000 2140 940
18/18 1150 2200 1000 2140 940
KPD DUO Direct driven A B C D E
7/7 450 900 450 840 390
9/7 500 1000 500 940 440
9/9 500 1000 500 940 440
10/8 550 1100 550 1040 490
10/10 550 1100 550 1040 490
12/9 630 1260 630 1200 570
12/12 630 1260 630 1200 570
Dimensions KPB DUO
Airfl ow
Side view
Top view
15
KVDDirect driven box fan for inline opera-tion and suitable for outdoor installations fi tted with a forward curve double inlet impeller and IP 54 F Class motors. The casing is made of 1 mm thick galvanized steel. The impeller shall be fi tted on 4 anti-vibration rubber plots and its outlet connected with the casing through a 18 mm thick rubber joint. An IP 55 connec-tion box is fi tted on the casing for easy installation. Maximum temperature of the transported air: 50°C
KVBBelt driven box fan for inline operation and suitable for outdoor installations fi tted with a forward curve double inlet impeller and IP 55 F Class motors. The casing is made of 1 mm thick galvanized steel. The impeller and motor shall be fi t-ted on a galvanized steel support with 4 anti-vibration rubber plots, the impeller’s outlet connected with the casing through a 18 mm thick rubber joint. An IP 55 connection box is fi tted on the casing for easy installation. Maximum temperature of the transported air: 50°C
KPBBelt driven box fan for inline or 90° operation suitable for outdoor installa-tion fi tted with a forward curve double inlet impeller and IP 55 F Class motors. The casing is made of aluminum profi le structure and 1 mm galvanized steel pan-els fi tted with 15 mm M1 polyurethane foam insulation. A maintenance door with polyamide hinge and key is located on the side of the box. The impeller and motor shall be fi tted on a galvanized steel support with 4 anti-vibration rubber plots and the impeller’s outlet connected with the casing through a 18 mm thick rubber joint. Maximum temperature of the transported air: 50°C
KPB DuoBelt driven twin fan for inline operation suitable for outdoor installation fi tted with a forward curve double inlet impel-ler and IP 55 F Class motors. The casing is made of aluminum profi le structure and 1 mm galvanized steel panels fi tted with 15 mm M1 polyurethane foam insulation. A maintenance door with polyamide hinge and key is located on the side of the box. The impeller and motor shall be fi tted on a galvanized steel support with 4 anti-vibration rubber
plots and the impeller’s outlet connected with the casing through a 18 mm thick rubber joint. Maximum temperature of the transported air: 50°C. An IP 55 con-nection box for both motors is fi tted on the casing.
KPD DuoDirect driven twin fan for inline operation suitable for outdoor installation fi tted with a forward curve double inlet impel-ler and IP 55 F Class motors. The casing is made of aluminum profi le structure and 1 mm galvanized steel panels fi tted with 15 mm M1 polyurethane foam insulation. A maintenance door with polyamide hinge and key is located on the side of the box. The impeller shall be fi tted on a galvanized steel support with 4 anti-vibration rubber plots and its outlet connected with the casing through a 18 mm thick rubber joint. Maximum temperature of the transported air: 50°C. An IP 55 connection box for both mo-tors is fi tted on the casing.
Specifi cation text
www.systemair.com
Syst
emai
r •
Inho
use
stud
io •
201
0 • A
rt n
o E8
087