BOZZA | Product Catalog 2013/2014

Product CatalogLubrication and Supply

Increase your productivity with quality products and sustainable technology

Solution in Lubrication

2013 / 2014Brazilian Industry

Operate in the lubrication and related businesses, in domestic and international markets, providing products and services of quality, respecting the environment, considering the welfare of all our employees and contributing to the country’s development.

“To be considered a world reference solution for lubrication, supported by a culture of ethics and sustainability.”

BOZZA, manufacturer of Lubrication Equipments and Supply Mobile Units, is focused on continuous improvement of its processes and products through training, employee awareness and continuous innovation to achieve recognition and customer satisfaction.

MISSION

VISION

QUALITY POLICY

Founded in 1950 by José Murília Bozza and installed in São Bernardo do Campo – São Paulo, BOZZA manufactures a complete line of equipments for lubrication and supply mobile units, including: hydraulic convoy, modulated, pressurized, mobile workshops, agricultural firefighters, supplying tanks and transport of water and irrigation tanks.

ABOUT

OPERATION MARKETS

AGRICULTURAL

CONSTRUCTION

SERVICE STATIONS

INDUSTRY

MINING

BOZZA’S FACTORY

INDEX

Pneumatic Grease Pumps

Pneumatic Oil Pumps

Manual Grease Pumps

Manual Oil Pumps

Diaphragm Pumps

Hose Reels

Equipments for Service Stations

Stationary

Meters

Supply Kits

Accessories

Repair Kits

Why buy BOZZA?

06

10

13

17

21

22

25

27

28

31

34

39

39

www.bozza.comwww.bozza.com6

Pneumatic PumPs | Grease

Features

| Mobile pneumatic grease pump with two-wheeled barrow| Air filter regulator (mod. FL2000)| Anodized aluminum engine block| 3 m / 118,11” grease hose (mod. 5680-3)| Swivel connection in “Z” (mod. 7302) | Grease compactor (mod. 11091-B)| Grease control valve (mod. 5040) | Metallic air conductor and muffler set| Internal filter in the suction system| Width x Height: 400mm/15,75” x 900mm/35,4” | Net weight: 14,6 kg/32,3 lb | Gross weight: 16,2 kg/35,7 lb| Packages: 1 | L=420mm x W=390mm x H=900mm| Volume: 0,15 m3 (147 liters)

Technical Information

| Application Pail 30 kg / 66,1 lb| Free flow 800 gr/min| Ratio 60 : 1| Air Entry ¼” NPT thread| Grease Outflow ⅜” NPT thread| Work Pressure 80-100 PSI (5,5-6,9 BAR)| Outflow Pressure 4800-6000 PSI (331-413 BAR)| Air Consumption 8,0 ft³/min.

Optional Itens

| Digital meter (mod. BZ-2000)| 6 meters hose (mod. 5680-6)| 10 meters hose (mod. 5680-10)| 15 meters hose (mod. 5680-15)| 20 meters hose (mod. 5680-20)

11015-G2Suitable for grease lubrication in machinery and fixed equipments that can not be removed from their workplaces. Ideal for companies that use low volume of grease.

Features

| Mobile pneumatic grease pump with two-wheeled barrow| Air filter regulator (mod. FL2000)| Anodized aluminum engine block| 3 m / 118,11” grease hose (mod. 5680-3)| Swivel connection in “Z” (mod. 7302) | Grease compactor (mod. 8063-B)| Compactor spring (mod. 8063-C)| Grease control valve (mod. 5040) | Metallic air conductor and muffler set| Internal filter in the suction system| Width x Height: 300 mm/11,81” x 800 mm/31,5” | Net weight: 10,8 Kg/23,8 lb | Gross weight: 11,6 Kg/25,6 lb| Packages: 1 | L=320 mm x W=320 mm x H=750 mm| Volume: 0,08 m3 (77 liters)


| Application Pail 14 kg / 30,9 lb| Free Flow 800 gr/min| Ratio 60 : 1| Air Entry ¼” NPT thread| Grease Outflow ⅜” NPT thread| Work Pressure 80-100 PSI (5,5-6,9 BAR)| Outflow Pressure 4800-6000 PSI (331-413 BAR)| Air Consumption 8,0 ft³/min.

Optional Itens

| Digital meter (mod. BZ-2000)| 6 meters hose (mod. 5680-6)

11020-G2Suitable for grease lubrication in machinery and fixed equipments that can not be removed from their workplaces. Ideal for companies that use higher volume of grease.

You can purchase the pneumatic pump adapted to 30kg barrows individually and its optionals. Contact us!

Illustrative pictureIllustrative picture

Note: The following results were obtained with free flow pumps. Lubricant used: Grease with NLGI grade 2 consistency. Room temperature. For other greases consistencies please contact us. All pneumatic pumps need compressed air to work, so make sure that the place where the equipment will be used has a supply point.

www.bozza.com 7

11030-120lbsSuitable for grease lubrication in machinery and fixed equipments that can not be removed from their workplaces. Ideal for companies that use higher volume of grease.

11030-G2Suitable for grease lubrication in machinery and fixed equipments that can not be removed from their workplaces. Ideal for companies that use 20 kg grease pails.


Features

| Pneumatic grease pump with two-wheeled cart| Adaptable to 20 kg/44,09 lb pails (pail not included)| Air filter regulator (mod. FL2000)| Anodized aluminum engine block| 3 m / 118,11” grease hose (mod. 5680-3)| Swivel connection in “Z” (mod. 7302) | Grease compactor (mod. 8063-B)| Pail lid (mod. 11030-N)| Grease control valve (mod. 5040) | Metallic air conductor and muffler set| Internal filter in the suction system| Width x Height (with cart): 410 mm/16,1” x 920 mm/36,2” | Net weight: 13,1 kg/28,9 lb | Gross weight: 15,25 kg/33,6 lb| Packages: 1 | L=530 mm x W=440 mm x H=930 mm| Volume: 0,22 m3 (217 liters)


| Application Container 20 kg/44,09 lb (not included)| Free flow 800 gr/min| Ratio 60 : 1| Air Entry ¼” NPT thread| Grease Outflow ⅜” NPT thread| Work Pressure 80-100 PSI (5,5-6,9 BAR)| Outflow Pressure 4800-6000 PSI (331-413 BAR)| Air Consumption 8,0 ft³/min.

Optional Itens

| Digital meter (mod. BZ-2000)| 6 meters hose (mod. 5680-6)| 10 meters hose (mod. 5680-10)| 15 meters hose (mod. 5680-15)| 20 meters hose (mod. 5680-20)

Features

| Pneumatic grease pump with two-wheeled cart| Adaptable to 120 lb/54,43 kg pails (pail not included)| 3 m / 118,11” grease hose (mod. 5680-3)| Swivel connection in “Z” (mod. 7302) | Grease compactor (mod. 8063-A-120)| Pail lid (mod. 11030-LBS)| Grease control valve (mod. 5040) | Metallic air conductor and muffler set| Internal filter in the suction system| Width x Height (with cart): 420 mm/16,5” x 1030 mm/40,5”| Net weight: 18,32 kg/40,4 lb | Gross weight: 20,56 kg/45,3 lb| Packages: 2 | L=1250 mm x W=150 mm x H=180 mm | L=450 mm x W=300 mm x H=780 mm| Volume: 0,14 m3 (139 liters)


| Application Container 120 lb/54,43 kg (not included)| Free flow 800 gr/min| Ratio 60 : 1| Air Entry ¼” NPT thread| Grease Outflow ⅜” NPT thread| Work Pressure 80-100 PSI (5,5-6,9 BAR)| Outflow Pressure 4800-6000 PSI (331-413 BAR)| Air Consumption 8 ft³/min.

Optional Itens

| Digital meter (mod. BZ-2000)| 6 meters hose (mod. 5680-6)| 10 meters hose (mod. 5680-10)| 15 meters hose (mod. 5680-15)| 20 meters hose (mod. 5680-20)| 15 meters automatic rewind hose reel (mod. SNAKE-GR15)

Illustrative picture Illustrative picture





11040-G2Suitable for grease lubrication on harvesters and agricultural machinery in general. Ideal for companies that use 20 kg grease pails.

Features

| Pneumatic grease pump| Adaptable to 20 kg / 44,1 lb pails (pail not included) | Air filter regulator (mod. FL2000)| Anodized aluminum engine block| 10 m / 394” grease hose (mod. 5680-10) | 10 m / 394” compressed air hose (mod. 5682-10) | 500 mm / 20” extension (mod. 5651-A)| Swivel connection in “Z” (mod. 7302) | Grease compactor (mod. 8563-B) | Pail lid (mod. 11040-N)| Grease control valve (mod. 5040) | Metallic air conductor and muffler set| Internal filter in the suction system | ¼” quick coupler (mod. 510)| Width x Height: 315 mm/12,4” x 740 mm/29,13” | Net weight: 15,16 kg/33,42 lb | Gross weight: 16,40 kg/36,16 lb| Packages: 1 | L=440 mm x W=280 mm x H=760 mm| Volume: 0,09 m3 (93,5 liters)


| Application Container 20 kg/44,1 lb (not included)| Free Flow 800 gr/min| Ratio 60 : 1| Air Entry ¼” NPT thread| Grease Outflow ⅜” NPT thread| Work Pressure 80-100 PSI (5,5-6,9 BAR)| Outflow Pressure 4800-6000 PSI (331-413 BAR)| Air Consumption 8,0 ft³/min.

Optional Itens

| Digital meter (mod. BZ-2000)| 15 meters hose (mod. 5680-15)| 20 meters hose (mod. 5680-20)

Illustrative picture

12020-Z-G2Suitable for grease lubrication in centralized lubrication systems, lubrication ditches and convoys. Ideal for companies that use 180kg grease pails.

Features

| Pneumatic grease pump| Air filter regulator (mod. FL2000)| Anodized aluminum engine block| Grease compactor (mod. 12020-A2)| 180 kg/396,83 lb pail lid (mod. 4040-011)| Metallic air conductor and muffler set| Internal filter in the suction system| Width x Height: 165 mm/6,5” x 1220 mm/48,0” | Net weight (pneumatic pump): 7,1 kg/15,7 lb | Gross weight: (pneumatic pump+lid+compactor): 15,1kg/33,4 lb| Packages: 2 | Pneumatic pump: L=1240 mm x W=140 mm x H=140 mm | Lid+Compactor: L=650 mm x W=100 mm x H=620 mm| Volume: 0,06 m3 (64,5 liters)


| Application Container 180 kg/397 lb (not included)| Free Flow 800 gr/min| Ratio 60 : 1| Air Entry ¼” NPT thread| Grease Outflow ⅜” NPT thread| Work Pressure 80-100 PSI (5,5-6,9 BAR)| Outflow Pressure 4800-6000 PSI (331-413 BAR)| Air Consumption 8,0 ft³/min.

Optional Itens

| Digital meter (mod. BZ-2000)| Control valve (mod. 5040) | 1,5 meter hose (mod. 5680-1,5)| 3 meters hose (mod. 5680-3) | 6 meters hose (mod. 5680-6)| 10 meters hose (mod. 5680-10)| 15 meters hose (mod. 5680-15)| 15 meters automatic rewind hose reel (mod. SNAKE-GR15)| Swivel connection in “Z” (mod. 7302)


You can purchase the pneumatic pump and the hose individually. Contact us!

www.bozza.com 9



PINGUIM-B01Used in service stations, garages, workshops and especially to lubricate industrial, agricultural and other machinery. The cart with two wheels and anatomical support provides convenience and portability to the points to be lubricated.

Features

| Pneumatic grease pump| 4 m/157, 5” hose | Grease control valve| Internal filter in the suction system| Width x Height: 333 mm/13,1” x 850 mm/33,4”| Net weight: 13,5 kg / 29,8 lb | Gross weight: 15,05 kg / 33,2 lb| Packages: 1 | L=430 mm x W=410 mm x H=930 mm| Volume: 0,164 m³ (164 liters)


| Application Container 13 kg/28,7 lb| Free Flow 800 gr/min| Ratio 50 : 1| Air Entry ¼” NPT thread| Grease Outflow ¼” NPT thread| Work Pressure 100 PSI (6,9 BAR)| Outflow Pressure 4000 – 5000 PSI (275 – 344 BAR)| Air Consumption 8 ft³/ min

Optional Itens

| Digital meter (mod. BZ-2000)


RHINO-GRSuitable for transfer or grease lubrication in simultaneous points in a centralized lubrication system. Ideal for companies that use 180 kg grease pails.

Features

| Pneumatic grease pump| 180 kg/397 lb pail lid (mod. 4040-Rhino) | Grease compactor (mod. Rhino-A2) | Width x Height: 170 mm/6,7” x 1250 mm/49,2” | Net weight: 19,382 kg / 42,73 lb | Gross weight: 21,749 kg / 47,95 lb| Packages: 2 | Pneumatic pump: L=1400 mm x W=210 mm x H=210 mm | Lid+Compactor: L=6600 mm x W=650 mm x H=111 mm| Volume 0,11 m3 (110 liters)


| Application Drum 200 Kg/441 lb| Free Flow 2000 gr/min| Ratio 50 : 1| Air Entry ⅜” NPT thread| Grease Outflow ¼” NPT thread| Work Pressure 70 – 180 PSI (4,8 – 12,4 BAR)| Outflow Pressure 3500 – 9000 PSI (241 – 620 BAR)| Air Consumption 21,6 ft³/min.

Optional Itens

| Digital Meter (mod. BZ-2000)| Grease control valve (mod. 5040)| 15 meters automatic rewind hose reel (mod. SNAKE-GR15)



Pneumatic PumPs | Oil

11021-S-G2Suitable for oil lubrication in fixed machinery and equipments that can not be removed from their workplaces.

Features

| Pneumatic oil pump with two-wheeled cart| 50 L reservoir (mod.4021)| 1/4” Air filter regulator (mod. FL2000)| Anodized aluminum engine block| 3 m / 118,1” hose (mod. 5690-3)| Control valve (mod. 5031-New) | Metallic air conductor and muffler set| Width x Height (with cart): 460 mm/18,1” x 985 mm/38,8” | Net weight: 19,5 kg/43,0 lb | Gross weight: 21,5 kg/47,4 lb| Packages: 1 | L=530 mm x W=440 mm x H=930 mm| Volume: 0,22 m3 (217 liters)


| Application Drum 50 L| Free Flow 20 L/min| Ratio 3 : 1| Air Entry ¼” NPT thread| Oil Outflow ½” NPT thread| Work Pressure 80-100 PSI (5,5-6,9 BAR)| Outflow Pressure 240-300 PSI (16,5-20,6 BAR)| Air Consumption 7,0 ft³/min.

Optional Itens

| Digital meter (mod. Shark-B01/ B-900) | Presettable electronic meter (mod. BP-3000C)| 6 meters hose (mod. 5690-6)| 10 meters hose (mod. 5690-10)| 15 meters hose (mod. 5680-15)


Note: The following results were obtained with free flow pumps. Lubricant used: SAE 30 Oil. Room temprature. For other oil viscosities please contact us. All pneumatic pumps need compressed air to work, so make sure that the place where the equipment will be used has a supply point.

12021-P-G2Suitable for oil lubrication in centralized lubrication systems and convoys. Ideal for companies that use 50 - 200 liters oil pails and other containers.

Features

| Pneumatic oil pump| Adaptable to 50 a 200L pails and other containers| 1/4” Air filter regulator (mod. FL2000)| Support kit to fix on the wall (mod. SF12021-G2)| Metallic air conductor and muffler set| Suction system| Width x Height: 165 mm/6,5” x 535 mm/21,06”| Net weight: 12,0 kg/26,53 lb | Gross weight: 13,8 kg/30,42 lb| Packages: 1 | L=580 mm x W=130 mm x H=150 mm| Volume: 0,01 m3 (11 liters)


| Application Drum 50 to 200 L (not included)| Free Flow 20 L/min| Ratio 3 : 1| Air Entry ¼” NPT thread| Oil Outflow ½” NPT thread| Work Pressure 80-100 PSI (5,5-6,9 BAR)| Outflow Pressure 240-300 PSI (16,5-20,6 BAR)| Air Consumption 7,0 ft³/min.

Optional Itens

| Digital Meter (mod. Shark-B01/ B-900) | Presettable electronic meter (mod. BP-3000C)| Oil Control valve (mod. 5031-New)| 6 meters hose (mod. 5690-6)| 10 meters hose (mod. 5690-10)| 15 meters hose (mod. 5680-15)| 15 meters automatic rewind hose reel (mod. SNAKE-OL15)


www.bozza.com 11



12021-T-G2Suitable for oil lubrication in centralized lubrication systems or countertops. Ideal for companies that use 50 liters oil pails.

Features

| Pneumatic oil pump| Adaptable to 50L pails| Air filter regulator (mod. FL2000)| Metallic air conductor and muffler set| Width x Height: 165 mm/6,5” x 850 mm/33,5”| Net weight: 9,2 kg/20,3 lb | Gross weight: 10,2 kg/22,5 lb| Packages: 1 | L=1240 mm x W=140 mm x H=140 mm| Volume: 0,02 m3 (24 liters)


| Application Container 50 L (not included)| Free Flow 20 L/min| Ratio 3 : 1| Air Entry ¼” NPT thread| Oil Outflow ½” NPT thread| Work Pressure 80-100 PSI (5,5-6,9 BAR)| Outflow Pressure 240-300 PSI (16,5-20,6 BAR)| Air Consumption 7,0 ft³/min.

Optional Itens

| Digital Meter (mod. Shark-B01/B-900) | Presettable electronic meter (mod. BP-3000C)| Control valve (mod. 5031-New)| 1 m / 39,4” hose (mod. 5640-CN)| 6 meters hose (mod. 5690-6)| 10 meters hose (mod. 5690-10)| 15 meters hose (mod. 5680-15)| 15 meters automatic rewind hose reel (mod. SNAKE-OL15)


12021-Z-G2Suitable for oil lubrication with 200 liters pails in centralized lubrication systems or convoys. Ideal for companies that use 200 liters oil pails.

Features

| Pneumatic oil pump| Adaptable to 200 L pails | Air filter regulator (mod. FL2000)| Metallic air conductor and muffler set| Width x Height: 165 mm/6,5” x 1140 mm/44,9”| Net weight: 9,6 kg/21,2 lb | Gross weight: 10,6 kg/23,4 lb| Packages: 1 | L=1240 mm x W=140 mm x H=140 mm


| Application Container 200 L (not included)| Free Flow 20 L/min| Ratio 3 : 1| Air Entry ¼” NPT thread| Oil Outflow ½” NPT thread| Work Pressure 80-100 PSI (5,5-6,9 BAR)| Outflow Pressure 240-300 PSI (16,5-20,6 BAR)| Air Consumption 7,0 ft³/min.| Volume 0,02 m3 (24 liters)

Optional Itens

| Digital Meter (mod. Shark-B01/ B-900) | Presettable electronic meter (mod. BP-3000C)| Control valve (mod. 5031-New)| 1,5 meters hose (mod. 5690-1,5)| 10 meters hose (mod. 5690-10)| 15 meters hose (mod. 5680-15)| 15 meters automatic rewind hose reel (mod. SNAKE-OL15)






RHINO-OLSuitable for transfer or oil lubrication in simultaneous points in a centralized lubrication systems. Ideal to use with high viscosity oils (SAE 250).

Features

| Pneumatic oil pump| Adaptable to 200 L pails | Internal filter in the suction system| Width x Height: 146 mm/5,75” x 1260 mm/49,6”| Net weight: 11,50 kg/25,35 lb | Gross weight: 12,50 kg/27,56 lb| Packages: 1 | L=1400 mm x W=210 mm x H=110 mm| Volume: 0,032 m3 (32 liters)


| Application Container 200 L (not included)| Free Flow 40 L/min| Ratio 5 : 1| Air Entry ⅜” NPT thread| Oil Outflow ¾” NPT thread| Work Pressure 70 – 170 PSI (4,8-11,7 BAR)| Outflow Pressure 350 – 850 PSI (24,1-58,6 BAR)| Air Consumption 21,0 ft³/min.

Optional Itens

| Digital meter (Shark-B01/B-900) | Presettable electronic meter (mod. BP-3000C)| Control valve (mod. 5031-New)



Pneumatic pump in application

www.bozza.com 13

manual PumPs | Grease

7030Suitable for grease lubrication in machinery and equipment that requires small amount of grease.

7020Suitable for grease lubrication in machinery and equipment that requires small amount of grease.

Features

| Manual grease pump| Works by pressure, system “come-and-go”| Female nozzle | Male nozzle (mod. 7024-M)| Width x Height: 35,2 mm/1,4” x 168 mm/6,6”| Net weight: 0,25 kg/0,55 lb | Gross weight: 0,35 kg/0,77 lb| Package information please inquire

Features

| Manual grease pump| Works by pressure, system “come-and-go” | Female nozzle | Male nozzle (mod. 7024-M) | Width x Height: 49 mm/1,9” x 225 mm/8,9”| Net weight: 0,4 kg/0.9 lb | Gross weight: 0,5 kg/1,2 lb| Package information please inquire


| Capacity 125 gr/0,28 lb| Free Flow 0,90 gr/actuation| Max. Work Pressure 1.000 PSI / 69 BAR



7029-G2Suitable for grease lubrication in machinery and equipment that requires small amount of grease.

Features

| Manual grease pump| Hydraulic coupler (mod. 310-C-NEWS) | Side lever| Flexible and rigid extension| Allows use of 400 gr/0,88 lb grease cartridges | Width x Height: 128 mm/5,0” x 550 mm/21,6”| Net weight: 1,47 kg/3,24 lb | Gross Weight: 1,51 kg/3,33 lb| Package information please inquire



Note: The following results were obtained with free flow pumps. Lubricant used: Grease with NLGI grade 2 consistency. Room temperature. For other greases consistencies please contact us.




7029-EASYSuitable for grease lubrication in machinery and equipment that requires small amount of grease.

Features

| Manual grease pump| Side lever| Rigid extension (mod. 319) | Hydraulic coupler (mod. 310-C-News)| Allows use of 400 gr/0,88 lb grease cartridges | Width x Height: 355 mm/14,0” x 370 mm/14,6”| Net weight: 1,33 kg/2,9 lb | Gross weight: 1,37 kg/3,0 lb| Package information please inquire



Illustrative PictureIllustrative picture



7029-MASTERSuitable for grease lubrication in machinery and equipment that requires small amount of grease.

Features

| Manual grease pump| With side lever and antiskid handle | Head fused with the charger| Valve for air release | Allows use of 400 gr/0,88 lb grease cartridges| Hydraulic coupler (mod. 310-C-News) | Width x Height: 145 mm/5,7” x 525 mm/20,7”| Net weight: 1,76 kg/3,9 lb | Gross weight: 1,80 kg/4,0 lb| Package information please inquire


| Capacity 500 gr/1,1 lb| Free Flow 1 gr/actuation| Max. Work Pressure 10.000 PSI / 689 BAR

7029-PREMIUMSuitable for grease lubrication in machinery and equipment that have difficult access to the lubrication points.

7029-SPECIALSuitable for grease lubrication in machinery and equipment that requires small amount of grease.

Features

| Manual grease pump| Side lever| Hydraulic coupler (mod. 310-C-News)| Allows use of 400 gr/0,88 lb grease cartridges | Width x Height: 130 mm/5,1” x 645 mm/25,4”| Net weight: 1,65 kg/3,6 lb | Gross weight: 1,69 kg/3,7 lb| Package information please inquire

Features | Cordless grease gun (with battery)| 750 mm/ 29,5” high-pressure flexible extension | Hydraulic coupler (mod. 310-C-News)| Allows use of 400 gr/0,88 lb grease cartridges | Battery 12V - BCA 10* | Battery charger - BCA 12 | Width x Height: 200 mm/7,9” x 480 mm/18,9”| Net weight: 7,09 kg/15,6 lb | Gross weight: 7,17 kg/15,8 lb| Package: Case for transportation and storage


| Capacity 400 gr/0,88 lb| Voltage 12V | Current 2,0 to 5,5A | Free Flow 75 gr/min| Max. Work Pressure 6,000 PSI / 414 BAR

*Battery duration: 30 min.


| Capacity 750 gr/1,65 lb| Free Flow 1 gr/actuation| Max. Work Pressure 6,000 PSI / 414 BAR


Illustrative Picture



www.bozza.com 15


7029-AIRSuitable for use in factory maintenance, agricultural applications, fleet service or for use on trucks connected to the air compressor of the vehicle.

Features

| Pneumatic pump for grease| Hydraulic coupler (mod. 310-C-News)| 300 mm/12” flexible hose | 165 mm/6,5” rigid extension| Allows use of 400 gr/0,88 lb grease cartridges| Loading grease: cartridge, suction or filler pump | Width x Height: 128 mm/5,04” x 550 mm/21,65”| Net weight: 1,47 kg/3,2 lb | Gross weight: 1,51 kg/3,3 lb| Package information please inquire


| Capacity 500 gr/1,1 lb| Air entry 1/4” NPT| Thread 1/8”| Free Flow 210 gr/min| Entry Pressure 60 - 115 PSI (4,2-7,9 BAR)| Work Pressure 3,000-6,000 PSI (207-414 BAR)| Air Consumption 6 ft³/min

NOTE: The use of compressed air source with input of 90 PSI (6,2 BAR) and output of 3,600 PSI (250 BAR) is recommended.

8020Suitable for grease lubrication in machinery and fixed equipments that can not be removed from their workplaces.

Features | Manual grease pump| Pumping using lever| ¼” with 1,3 m high pressure hose (mod. 6630-1.3) | Rigid extension (mod. 320-52) | Hydraulic coupler (mod. 310-C-NEWS)| Grease compactor (mod. 8063-B) | Compactor spring (mod. 8063-C) | Width x Height: 420 mm/16,5” x 730 mm/28,7”| Net weight: 5,83 kg/12,8 lb | Gross weight: 6,65 kg/14,7 lb| Packages: 1 | L=300 mm x W=300 mm x H=510 mm


| Capacity 14 kg/30,9 lb| Free Flow 12 gr/cycle| Outflow Pressure 3,500 PSI / 241 BAR

Optional Itens

| ¼” with 3 m hose (mod.6630-3) | ¼” with 5 m hose (mod.6630-5)


Features | Manual grease pump| Pumping using lever | ¼” with 1,3 m high pressure hose (mod. 6630-1.3)| Rigid extension (mod. 320-52) | Hydraulic coupler (mod. 310-C-NEWS) | Width x Height: 430 mm/16,9” x 710 mm/27,9”| Net weight: 7,2 kg/15,9 lb | Gross weight: 8,1 kg/17,9 lb| Packages: 1 | L=430mm x W=250mm x H=600mm


| Capacity 20 kg/44,1 lb| Free Flow 12 gr/cycle| Outflow Pressure 3,500 PSI / 241 BAR

Optional Itens

| ¼” with 3 m hose (mod. 6630-3) | ¼” with 5 m hose (mod. 6630-5)







8520Suitable for grease lubrication in machinery and fixed equipments that can not be removed from their workplaces. Ideal for companies that use 20 kg grease pails.

Features | Manual grease pump for 20 kg pails| Pumping using lever| ¼” with 1,3 m high pressure hose (mod. 6630-1.3) | Rigid extension (mod. 320-52) | Hydraulic coupler (mod. 310-C-NEWS) | Metal compactor (mod. 8563-B) | Width x Height: 335 mm/13,2” x 710 mm/27,9”| Net weight: 4,9 kg/10,8 lb | Gross weight: 5,4 kg/11,9 lb| Packages: 1 | L=320 mm x W=100 mm x H=480 mm


| Capacity 20 kg/44,1 lb (pail not included)| Free Flow 12 gr/cycle| Outflow Pressure 3,500 PSI / 241 BAR

Optional Itens

| ¼” with 3 m hose (mod.6630-3) | ¼” with 5 m hose (mod.6630-5)



Features | Manual grase pump| Pumping using lever | ¼” with 1,3 m high pressure hose (mod. 6630-1.3) | Rigid extension (mod. 320-52) | Hydraulic coupler (mod. 310-C-NEWS) | Grease compactor (mod. 8063-B)| Compactor spring (mod. 8505-013) | Width x Height: 365 mm/14,4” x 400 mm/15,7”| Net weight: 3,2 kg/7,0 lb | Gross weight: 3,9 kg/8,6 lb| Packages: 1 | L=280 mm x W=280 mm x H=370 mm


| Capacity 5 kg / 11 lb| Free Flow 7 gr/cycle| Outflow Pressure 2,500 PSI / 172 BAR

Optional Itens

| Mangueira de ¼” com 3 m (mod. 6630-3)| Mangueira de ¼” com 5 m (mod. 6630-5)

8522Suitable for grease lubrication in machinery and fixed equipments that requires small amount of grease.

Features | Manual grease pump| Pumping using lever | ¼” with 1,3 m high pressure hose (mod. 6630-1.3) | Rigid extension (mod. 320-52) | Hydraulic coupler (mod. 310-C-News) | Grease compactor (mod. 8063-B) | Compactor spring (mod. ML-8522) | Width x Height: 390 mm/15,3” x 600 mm/23,6”| Net weight: 4,7 kg/10,4 lb | Gross weight: 5,4 kg/11,9 lb| Packages: 1 | L=280 mm x W=280 mm x H=370 mm


| Capacity 7 kg| Free Flow 12 gr/cycle| Outflow Pressure 3,500 PSI / 241 BAR

Optional Itens

| ¼” with 3 m hose (mod. 6630-3)| ¼” with 5 m hose (mod. 6630-5)





www.bozza.com 17

manual PumPs | Oil

Note: The following results were obtained with free flow pumps. Lubricant used: SAE 30 Oil. Room temprature. For other oil viscosities please contact us.

2135Suitable for small oil lubricant applications where it’s not required a careful control of the amount of lubricant applied.

Features

| Manual oil pump| Rigid nozzle | Width x Height: 130 mm/5,1” x 160 mm/6,3”| Net weight: 0,12 kg/0,3 lb | Gross weight: 0,22 kg/0,5 lb| Package information please inquire


| Capacity 135ml



Features

| Manual oil pump| Rigid nozzle | Flexible nozzle | Width x Height: 165 mm/6,5” x 170 mm/6,7”| Net weight: 0,19 kg/0,41 lb | Gross weight: 0,29 kg/0,64 lb| Package information please inquire


| Capacity 250 ml

Features

| Manual oil pump| Rigid nozzle | Flexible nozzle | Width x Height: 180 mm/7,1” x 200 mm/7,9”| Net weight: 0,27 kg/0,6 lb | Gross weight: 0,37 kg/0,8 lb| Package information please inquire


| Capacity 500 ml





manual PumPs | Oil


7022-T-G2Suitable for extracting lubricant oil of drums using a pumping lever, uses a telescopic suction tube to fit in drums of 50 up to 200 liters.

7021-G2Suitable for extracting lubricating oil of gear box, transmission gear and differencial axle.

Features

| Suction gun to extract oil| 300 mm/ 11,81” hose| Width x Height: 101 mm/4,0” x 700 mm/27,6”| Net weight: 0,82 kg/1,8 lb | Gross weight: 0,95 kg/2,1lb| Package information please inquire

Features

| Manual oil pump| Telescopic tube | Double fixing plug | Adaptable to drums of 50 up to 200 L | Width x Height: 490 mm/19,3” x 920 mm/36,2”| Net weight: 1,99 kg/4,4 lb | Gross weight: 2,35 kg/5,2 lb| Package information please inquire


| Reservoir 50 a 200 L (Not included)| Free Flow 300 ml/actuation


| Capacity 500 ml

7022-PPSuitable for oil and fluids transference from drums of 50 up to 200 liters.

Features

| Manual pump with viton gasket| Telecospic tube| Adaptable to drums of 50 up to 200 L | Used to transfer oil lubricant, water, diesel, biodiesel, kerosene, weak acid and alkaline | Width x Height: 540 mm/21,2” x 1.440 mm/56,7”| Net weight: 0,800 kg/1,76 lb | Gross weight: 1,31 kg/2,9 lb| Package information please inquire


| Free Flow 16 L/min




www.bozza.com 19


manual PumPs | Oil


Illus

trat

ive

Pict

ure

7801-A32Suitable for general fluids transference using a swivel handle.

Features

| Polypropylene manual pump for fluids transference| Used to transfer water, diesel, biodiesel, heating oil and Arla 32 | Adaptable to drums of 50 up to 200 L | Width x Height: 210 mm/8,3” x 1340 mm/52,8”| Net weight: 1,67 kg/3,7 lb | Gross weight: 1,90 kg/4,2 lb| Package information please inquire


| Reservoir 50 up to 200 L (not included)| Free Flow 0,300 L/cycle

7801-MSuitable for supply with light lubricant oils and fuels, it has a telescopic suction tube to fit in drums of 50 up to 200 liters.

Features

| Manual oil pump| 1,5 m plastic hose | Telescopic tube | Filter suction tube (mod. Filter-B01) | Adaptable to drums of 50 up to 200 L| Width x Height: 420 mm/16,5” x 730 mm/28,7”| Net weight: 5,83 kg/12,8 lb | Gross weight: 6,65 kg/14,7 lb| Package information please inquire


| Reservoir 50 up to 200 L (not included)| Free Flow 0,250 L/ciclo

Illus

trat

ive

Pict

ure

7022-PREMIUMSuitable for fluids transference from drums of 50 up to 200 liters.

Features

| Manual pump with viton gasket| Telescopic tube | Adaptable to drums of 50 up to 200 L | Used to transfer certain chemicals, aggressive acids (strong), strong alkaline and solutions with nitric acid lower than 40% | Width x Height: 540 mm/21,2” x 1.440 mm/56,7”| Net weight: 0,800 kg/1,76 lb | Gross weight: 1,31 kg/2,9 lb| Package information please inquire


| Reservoir 50 up to 200 L (not included) | Free Flow 16 L/min

Illus

trat

ive

Pict

ure

Illus

trat

ive

Pict

ure


manual PumPs | Oil


8032-1Suitable for lubricant oil transference using a pumping crank.

Features

| Oil manual pump| 1,5 m plastic hose (mod. 5660-1,5) | Nozzle (mod. 8133) | Width x Height: 420 mm/16,5” x 720 mm/28,3”| Net weight: 7,2 kg/15,9 lb | Gross weight: 8,4 kg/18,5 lb| Packages: 1 | L=440 mm x W=280 mm x H=760 mm


| Reservoir 22 L| Free Flow 0,250 L/cycle| Cycles per liter 4


8031Suitable for lubricant oil transference using a pumping lever.

Features

| Oil manual pump with two-wheeled cart| 1,5 m plastic hose (mod. 5660-1,5)| Nozzle (mod. 8133)| Width x Height: 400 mm/15,7” x 900 mm/35,4”| Net weight: 11,2 kg/24,7 lb | Gross weight: 12,7 kg/28 lb| Packages: 1 | L=420 mm x W=390 mm x H=900 mm


| Reservoir 30 L (two-wheeled cart)| Free Flow 0,125 L/cycle| Cycles per liter 8

Optional Itens

| 2,0 m plastic hose (mod. 5660-2)Illustrative Picture

8021Suitable for lubricant oil transference using a pumping lever.

Features

| Oil manual pump| 1,5 m plastic hose (mod. 5660-1,5) | Nozzle (mod. 8133) | Width x Height: 420 mm/16,5” x 730 mm/28,7”| Net weight: 6,20 kg/13,7 lb | Gross weight: 7,02 kg/15,5 lb| Packages: 1 | L=300 mm x W=300 mm x H=510 mm


| Reservoir 14 L| Free Flow 0,125 L/cycle| Cycles per liter 8

Optional Itens

| 2,0 m plastic hose (mod.5660-2)



7802Suitable for general fluids transference using a swivel handle.

Features

| Polyproplene manual pump for fluids transference| Used to transfer chemical products, solutions with less than 40% of nitric acid and Arla 32 | Adaptable to drums of 50 up to 200 L | Width x Height: 140 mm/5,5” x 1320 mm/52”| Net weight: 2,32 kg/5,1 lb | Gross weight: please inquire| Package information please inquire


| Reservoir 50 up to 200 L (not included)| Free Flow 0,300 L/cycle

Illus

trat

ive

Pict

ure

www.bozza.com 21

DiaPhraGm PumPs

BEAVER-B02-VPump to supply or transfer biodiesel, Arla 32 (Ad-Blue) and fluids in general.

Features

| ¾” diaphragm pump| Width x Height: 242 mm/9,5” x 289 mm/11,4”| Net weight: 5,8 kg/12,9 lb | Gross weight: 6,5 kg/14,3 lb| Not suitable for use with solvents | Package information please inquire


| Maximum particle diameter of suction - 1/8”| Free Flow 60 L/min| Ratio 1:1 | Maximum Work Pressure 115 PSI/7,9 BAR | Air Entry ¼”| Fluid Entry ¾” | Fluid Outflow ¾”| Air Consumption 6,8 ft³/min| Maximum Work Temperature - 55 °C

Optional Itens

| Filter regulator (mod. FL2000) | ¾” supply nozzle (mod. 5522) | 1” digital meter (mod. B-32)| Manual supply nozzle (mod.Ad-Blue/Arla 32)

BEAVER-B01-VPump to supply or transfer new or used lubricant oil, diesel e kerosene.

Features

| 1” diaphragm pump| Width x Height: 255 mm/10,0” x 296 mm/11,6”| Net weight: 9,4 kg/20,7 lb | Gross weight: 10,1 kg/22,2 lb| Package information please inquire


| Maximum particle diameter of suction - 1/8”| Free Flow 90 L/min| Ratio 1:1 | Maximum Work Pressure 115 PSI/7,9 BAR | Air Entry ¼” | Fluid Entry 1” | Fluid Outflow 1”| Air Consumption 6,5 ft³/min| Maximum Work Temperature - 128 °C

Optional Itens

| Filter regulator (mod. FL2000) | 1” supply nozzle (mod. 5322) | 1” digital meter (mod. B-32)| Manual supply nozzle (mod.Ad-Blue/Arla 32)

Illustrative Picture Illustrative Picture


hOse reel | Grease, Oil, air anD Water

SNAKE-GR15Suitable for automatically rewind the grease hose avoiding wear, contamination and to keep the place organized.

Features

| Automatic grease reel| ¼” grease hose with 15 m/590”| Swivel conection (mod. 7302)| Grease control valve (mod. 5040)| Width x Height: 455 mm/17,9” x 500 mm/19,7”| Net weight: 22,8 kg/50,3 lb | Gross weight: 24,2 kg/53,4 lb| Packages: 1 | L=550 mm x W=260 mm x H=565 mm


| Work Pressure 5,000 PSI / 344 BAR

Optional Itens

| Digital meter (mod. BZ-2000)

SNAKE-AR15Suitable for automatically rewind the compressed air hose avoinding wear, contamination and to keep the place organized.

SNAKE-OL15Suitable for automatically rewind the grease hose avoiding wear, contamination and to keep the place organized.

Features

| Automatic oil reel| ½” oil hose with15 m/590”| Oil control valve (mod. 5031-New)| Width x Height: 455 mm/17,9” x 500 mm/”19,7”| Net weight: 24,2 kg/53,3 lb | Gross weight: 25,6 kg/56,4 lb| Packages: 1 | L=550 mm x W=260 mm x H=565 mm

Features

| Automatic air reel| ½” air hose with 15 m/590” | Cleaning nozzle (mod. BL-1) | Width x Height: 455 mm/17,9” x 500 mm/19,7”| Net weight: 24,0 kg/52,9 lb | Gross weight: 25,4 kg/56 lb| Packages: 1 | L=550 mm x W=260 mm x H=565 mm


| Work Pressure 300 PSI / 21 BAR

Optional Itens

| Tire gauge (mod. 1102)



Optional Itens

| Digital meter (mod. B-900) | Presettable meter (mod. BP-3000C)




www.bozza.com 23


SNAKE-AG15Suitable for automatically rewind the water hose avoiding wear, contamination and to keep the place organized.

Features

| Automatic water reel| ½” water hose with15 m/590”| Adjustable nozzle (mod. ESG1/2) | Width x Height: 455 mm/17,9” x 500 mm/19,7”| Net weight: 24,0 kg/52,0 lb | Gross weight: 25,4 kg/56 lb| Packages: 1 | L=550 mm x W=260 mm x H=565 mm



DS20Suitable for automatically rewind the fuel hose avoiding wear, contamination and to keep the place organized.

Features

| Automatic fuel reel| ¾” fuel hose with 20 m/787”| Width x Height: 555 mm/21,8” x 615 mm/24,2”| Net weight: 51,4 kg/113,3 lb | Gross weight: 54,3 kg/119,6 lb| Packages: 1 | L=670 mm x W=340 mm x H=690 mm



Optional Itens

| Supply nozzle (mod. 5022) | Supply nozzle (mod. 5522)

DS15Suitable for automatically rewind the fuel hose avoiding wear, contamination and to keep the place organized.

Features

| Automatic fuel reel| 1” fuel hose with15 m/590” | Width x Height: 555 mm/21,8” x 615 mm/24,2”| Net weight: 49,2 kg/108,5 lb | Gross weight: 52,1 kg/114,8 lb| Packages: 1 | L=670 mm x W=340 mm x H=690 mm



Optional Itens

| Supply nozzle (mod. 5222) | Supply nozzle (mod. 5022)






SNAKE-BD-GR15Suitable for wrapping and pack grease hose avoiding wear, contamination and to keep the place organized.

Features

| Armoured grease reel with automatic retraction| ¼” hose with 15 m/590” | Width x Height: 510 mm/20,1” x 510 mm/20,1”| Net weight: 30,2 kg/66,6 lb | Gross weight: 32,1 kg/70,7 lb| Packages: 1 | L=630 mm x W=630 mm x H=360 mm



Optional Itens

| Swivel conection in “Z” (mod. 7302) | Grease control valve (mod. 5040) | Digital meter (mod. BZ-2000) Illustrative Picture

SNAKE-BD-AR-AG15Suitable for wrapping and pack compressed air hose avoiding wear, contamination and to keep the place organized.

Features

| Armoured water and air reel with automatic retraction| ½” hose with 15 m/590” | Width x Height: 510 mm/20,1” x 510 mm/20,1”| Net weight: 31,4 kg/69,2 lb | Gross weight: 33,3 kg/73,4 lb| Packages: 1 | L=630 mm x W=630 mm x H=360 mm



Optional Itens

| Cleaning nozzle (mod. BL-1) | Tire gauge (mod. 1102)

SNAKE-BD-OL15Suitable for wrapping and pack oil hose avoiding wear, contamination and to keep the place organized.

Features

| Armoured oil reel with automatic retraction| ½” hose with 15 m/590”| Width x Height: 510 mm/20,1” x 510 mm/20,1”| Net weight: 32,4 kg/71,4 lb | Gross weight: 34,3 kg/75,5 lb| Packages: 1 | L=630 mm x W=630 mm x H=360 mm



Optional Itens

| Oil control valve (mod. 5031-NEW) | Digital meter (mod. B-900) | Presettable meter (mod. BP-3000C)



www.bozza.com 25

equiPments fOr service statiOns

6011-C | Oil COlleCtOr

Collect and store used engine oil removed from vehicles.

1515-G | Fuel GauGe

Measures the quantity in gallons of meters, reservoirs and fuel pumps in service stations and similars.

Features

| Steel fuel gauge | Width x Height: 340 mm/13,4” x 645 mm/25,4”| Net weight: 6,6 kg/14,5 lb | Gross weight: 7,8 kg/17,3 lb| Packages: 1 | C=450 mm x L=300 mm x A=780 mm

Features

| Adjustable height tray| Two-wheeled barrow | Filter | Width x Height: 440 mm/17,3” x 1300 mm/51,2”| Net weight: 10,8 kg/23,8 lb | Gross weight: 12,9 kg/28,5 lb| Packages: 1 | L=530 mm x W=440 mm x H=930 mm

NOTE: You can purchase the fixed collector without the wheels. Please contact us!


| Reservoir 30 L (móvel com 2 rodas)


| Reservoir 5 gal

6028-B | Pressurized Oil COlleCtOr

Remove used oil stored in the collector through pressurized compressed air system.

Features

| Adjustable height tray| Four-wheeled barrow | Width x Height máx: 400 mm x 1650 mm / 65”| Net weight: 22,600 kg / 49,82 lb | Gross weight: 23,837 kg / 52,551 lb| Packages: 1 | L=540 mm x W=460 mm x H=960 mm


| Reservoir 80 L (four-wheels)| Maximum Work Pressure 7 PSI/ 0,5 BAR




1616 | Fuel GauGe

Measures the quantity in liters of meters, reservoirs and fuel pumps in service stations and similars.

Features

| Stainless steel fuel gauge | Width x Height: 260 mm/10,2” x 730 mm/28,7”| Net weight: 5,93 kg/13,1 lb | Gross weight: 7,17 kg/15,8 lb| Packages: 1 | L=450 mm x W=300 mm x H=780 mm


| Reservoir 20 L| Scale 19,94-20,06 L



equiPments fOr service statiOns

6022-PREMIUM | Oil COlleCtOr

Collect and transfer used oil removed from heavy vehicles and reservoirs in general.

Features

| Tray to collect oil| Suction and discharge hose | Pneumatic oil pump | Width x Height: 1500 mm/59,0” x 700 mm/27,6”| Net weight: 27,2 kg/60,0 lb | Gross weight: 31,1 kg/68,6 lb| Packages: 1 | L=930 mm x W=600 mm x H=390 mm


| Reservoir: 68 L (four wheels) | Specification of the pneumatic oil pump: | Free Flow: 20 L/min | Ratio: 3:1 | Work Pressure: 80 a 100 PSI (95,5 BAR - 6,9 BAR) | Air Consumption: 7,0 ft³/min

1010-CF | driPPinG stand

Collect and store oil remains used in vehicles in general.

Features

| Tripod| Draining tap | 7 funnels included | Width x Height: 440 mm/17,3” x 905 mm/35,6”| Net weight: 8,0 kg/17,6 lb | Gross weight: 11,4 kg/25,1 lb| Packages: 1 | L=580 mm x W=530 mm x H=1045 mm


| Reservoir 25 L

NOTE: You can purchase this product without the funnels. Please contact us!

PUMA-B01Extractor of used oil and other fluids from any vehicle using vacuum extraction system. Widely used with cars, boats and motorcycles.

Features

| Four-wheeled barrow| Suction hose with 2m / 78,74”| Drainage hose with 2m / 78,74”| Six suction probes (metal and flexible)| Adapters for BMW and Wolkswagen| Width x Height: 400 mm/15,75” x 950 mm/37,4”| Net weight: 26 Kg / 57,32 lb | Gross weight: 28 Kg / 61,73 lb| Packages: 1 | L=840 mm x W=590 mm x H=350 mm


| Reservoir 65 L (four-wheels)| Volume 0,168 m3 (168 L)| Air Pressure for Vacuum 100-115 PSI (7-8 BAR)| Depressurization Time 100-150s| Suction Speed 1,5-2 lpm (0,4-0,5 gpm)| Max. Capacity Drainage 45 L / 12 GL| Max. Pressure Drainage 14,5 PSI (1 BAR)| Entry Connection 1/4” quick coupler 1/4” female NPT NOTE. Suction speed valid with oil temperature between 70-80°




PANTHER-B01Extractor of used oil and other fluids from any vehicle using vacuum extraction system. Widely used with cars, boats and motorcycles.Features

| Four-wheeled barrow| Suction hose with 2 m / 78,7”| Six suction probes (metal and flexible)| Adapters for BMW and Wolkswagen| Height | Max: 1560 mm / 61,4” | Min:1000 mm / 39,4”| Net weight: 40 kg / 88,2 lb | Gross weight: 44 kg / 97,0 lb| Packages: 3 | Drum: L=1460 mm x W=440 mm x H=900 mm | Compartment: L=520 mm x W=270 mm x H=270 mm | Tray: L=640 mm x W=630 mm x H=160 mm


| Reservoir 65 L (four-wheels)| Compartment Capacity 8 L| Tray Capacity 18 L| Volume 0,293 m3 (293 L)| Air Pressure for Vacuum 100-115 PSI (7-8 BAR)| Depressurization Time 120-150s| Suction Speed 1,5-2 lpm (0,4-0,5 gpm)| Max. Capacity Drainage 45 L / 12 GL| Max. Pressure Drainage 14,5 PSI (1 BAR)| Entry Connection 1/4” quick coupler 1/4” female NPT

NOTE. Suction speed valid with oil temperature between 70-80°


www.bozza.com 27

statiOnary

BOZZA offers a complete solution in equipments for supply and lubrication, developed with the highest quality and thus, meet the diverse needs of its customers.“ ”

15021-1Transfer and filtering pump for contaminated lubricant oil.

Features

| Set for transference and oil filtration | Metallic plataform (tray) | Y filter in the suction - FY3/4| Recalque filter with10 microns element - FR10| Starter set (mod. PDW02)| 3/4” Gear pump (mod. BE3/4SM) | Reinforced rigid spiral hose for suction and recalque with 5m (mod.12021-P14)| Width x Height: 750 mm/29,5” x 1100 mm/43,3”| Net weight: 70 kg/154 lb | Gross weight: please inquire| Package information please inquire


| Free Flow 30 L/min | Voltage Three-phase 220 / 380V | Engine Amp 3,5A (220 Volts)| Electric Engine 1CV

Optional Itens

| 1CV Electric Engine 2,0A (380 Volts)




meters

BO-18Suitable for supply and flow control of oil lubricant, diesel e kerosene. Most used in high flow operations.

SHARK-B01Supply and flow control of lubricant oil, ideal for use with bulk oil.

Features | Pistol with digital meter for oil lubricant | Partial and total counter | 90° flexible extension | Anti-dropping nozzle (mod. TIPSHARK-B01)| Width x Height: 130 mm/5,1” x 600 mm/23,6”| Net weight: 1,5 kg/3,2 lb | Gross weight: 1,7 kg/3,8 lb| Packages: 1 | L=340 mm x W=340 mm x H=670 mm

Features

| Manual nozzle with digital meter| Partial and total counter| Rigid anti-dropping nozzle | Width x Height: 90 mm/3,5” x 190 mm/7,5”| Net weight: 2,72 kg/6 lb | Package information please inquire


| Inlet Thread ¾” NPT | Precision ± 0,5% | Work Temperature ≤60°C | Maximum Free Flow 60 L/min| Minimum Free Flow 1 L/min | Work Pressure 750 PSI/50 BAR


| Maximum Free Flow 35 L/min | Minimum Free Flow 1 L/min | Work Pressure 1.450 PSI/100 BAR | Inlet Thread 1/2” NPT| Outlet Thread 1/2” NPT| Precision ± 0,5%

BO-19Suitable for supply and flow control of diesel and kerosene. Most used in high flow operations.

Features

| Manual nozzle with digital meter| Partial and total counter| Rigid anti-dropping nozzle | Width x Height: 90 mm/3,5” x 135 mm/5,3”| Net weight: 1,69 kg/3,72 lb | Package information please inquire


| Inlet Thread 1” NPT | Nozzle Diameter 15/16”| Precision ± 0,5%| Work Temprature ≤60°C | Maximum Free Flow 100 L/min| Minimum Free Flow 10 L/min | Work Pressure 435 PSI/30 BAR




www.bozza.com 29

meters

BZ-2000Electronic flow meter for grease application.

Features

| Grease digital meter | Partial and total counter| Width x Height: 55 mm/2,2” x 260 mm/10,2”| Net weight: 1,1 kg/2,5 lb | Gross weight: 1,4 kg/3,2 lb| Package information please inquire

Note: The following results were obtained with free flow pumps. Lubricant used: Grease with NLGI grade 2 consistency. Room temperature. For other greases consistencies please contact us!


| Work Pressure 9.000 PSI/600 BAR| Inlet Thread 1/4” NPT | Outlet Thread 1/8” NPT | Precision ± 2%

Optional Itens

| 300mm Flexible Extension (mod. 5651)| 500mm Flexible Extension (mod. 5651-A)


B-32Suitable for supply and flow control of diesel, kerosene and AD-blue (Arla-32). Most used in high flow operations.

Features

| Turbine digital meter| Partial and total counter| Front panel can be adjusted 360° | Width x Height: 85 mm/3,35” x 50 mm/1,97”| Net weight: 1,7 kg/3,7 lb | Gross weight: 2,0 kg/4,4 lb| Package information please inquire


| Maximum Free Flow 100 L/min | Minimum Free Flow 10 L/min| Inlet Thread 1” BSP| Outlet Thread 1” BSP | Max. Work Pressure 145 PSI (10 BAR) | Precision ± 0,5%


BP-3000CSuitable for supply and flow control of lubricant oil, allows up to 04 schedules, ideal for use with bulk oil.

Features

| Partial and total counter| Width x Height: 110 mm/4,3” x 135 mm/5,3”| Net weight: 1,7 kg/3,7 lb | Gross weight: 2,0 kg/4,4 lb| Package information please inquire


| Maximum Free Flow 35 L/min | Minimum Free Flow 1 L/min | Work Pressure 1,015 PSI/70 BAR | Inlet Thread 1/2” NPT| Outlet Thread 1/2” NPT| Precision ± 0,5%



meters

FOX-GL-B01Flow meter for diesel (gallons).

Features

| Volumetric meter| Width x Height: 200 mm/7,9” x 150 mm/5,9”| Net weight: 1,8 kg/4,0 lb | Gross weight: 1,9 kg/4,2 lb| Package information please inquire


| Maximum Free Flow 32 gal/min | Minimum Free Flow 5 gal/min | Work Pressure 50 PSI/3,5 BAR| Rupture Pressure 400 PSI/28 BAR | Precision ±1% | Inlet Thread 1” NPT | Outlet Thread 1” NPT| Temperature -10°C ± 60°C

BZ-5500High flow meter for diesel.

BZ-4500Average flow meter for diesel.

Features

| Volumetric meter| Width x Height: 200 mm/7,9” x 480 mm/19,0”| Net weight: 12 kg/26,5 lb | Gross weight: 13 kg/28,7 lb| Package information please inquire

Features

| Volumetric meter with mechanical counter| Width x Height: 240 mm/9,4” x 410 mm/16,1”| Net weight: 20 kg/44,1 lb | Gross weight: 21kg/46,3 lb| Package information please inquire


| Maximum Free Flow 400 L/min | Work Pressure 145 PSI/10 BAR | Precision até ±0,2% | Inlet Thread 2” NPT | Outlet Thread 2” NPT| Temperature -40°C + 60°C


| Maximum Free Flow 90 L/min | Minimum Free Flow 5 L/min | Work Pressure 50 PSI/3,4 BAR | Precision ±0,2% | Inlet Thread 1” NPT | Outlet Thread 1” NPT| Temperature -40°C + 60°C




FOX-LT-B01Flow meter for diesel (liters).

Features

| Volumetric meter| Width x Height: 200 mm/7,9” x 150 mm/5,9”| Net weight: 1,8 kg/4,0 lb | Gross weight: 1,9 kg/4,2 lb| Package information please inquire


| Maximum Free Flow 120 L/min | Minimum Free Flow 20 L/min | Work Pressure 50 PSI/3,5 BAR| Rupture Pressure 400 PSI/28 BAR | Precision ±1% | Inlet Thread 1” NPT | Outlet Thread 1” NPT| Temperature -10°C ± 60°C Illustrative Picture

www.bozza.com 31

suPPly Kits

FOX-24VOLTSPortable electric supply or transference kit for diesel.

FOX-12VOLTSPortable electric supply or transference kit for diesel.

Features

| Electric supply pump (battery 12Volts) | ¾” hose with 4 m/157” | ¾” supply nozzle | By-pass valve | Width x Height: 125 mm/4,9” x 175 mm/6,9”| Net weight: 7,5 kg/16,5 lb | Gross weight: 8,2 kg/18 lb| Package information please inquire

Features

| Electric supply pump (battery 24Volts) | ¾” hose with 4 m/157” | ¾” supply nozzle | By-pass valve | Width x Height: 125 mm/4,9” x 175 mm/6,9”| Net weight: 7,5 kg/16,5 lb | Gross weight: 8,2 kg/18 lb| Package information please inquire


| Free Flow 40 L/min | Voltage 24V| Current 15A | Work Cycle 30 min | Work Pressure 17 PSI/1,2 BAR| Inlet Thread ¾” NPT| Outlet Thread ¾” NPT| Work Temperature 10°C up to 60°C

Optional Itens

| Mechanical meter (mod. BZ-6000) | ¾” Automatic supply nozzle (mod. 5522)


| Free Flow 40 L/min | Voltage 12V | Current 25A | Work Cycle 30 min | Work Pressure 17 PSI/1,2 BAR| Inlet Thread ¾” NPT| Outlet Thread ¾” NPT| Work Temperature 20°C up to 60°C

Optional Itens

| Mechanical meter (mod. BZ-6000) | ¾” Automatic supply nozzle (mod. 5522)

FOX-24VOLTS-OL-BO4Portable electric supply pump for lubricant oil. Most used in construction sites, boats and agricultural sector.

Features

| Electric supply pump foi oil (battery 24V) | Connection cables to the battery fuse | By-pass valve | Width x Height: 90 mm/3,5” x 105 mm/4,1”| Net weight: 1,05 kg/2,3 lb | Gross weight: 1,1 kg/2,4 lb| Packages: 1 | L=220mm x W=180mm x H=160mm


| Free Flow 10 L/min | Voltage 24V| Current 30A | Work Cycle 30 min | Work Pressure 60 PSI/4,1 BAR| Inlet/Outlet Thread ¾” | Work Temperature -20°C up to 40°C| Maximum Suction Height 2m

Optional Itens

| Oil control valve (mod. 5031-New) | Digital meter for lubricant oil (mod. Shark-B01)




FOX-12VOLTS-OL-BO3Portable electric supply or transference pump for lubricant oil.

Features

| Electric supply pump for oil (battery 12V) | Connection cables to the battery fuse | By-pass valve | Width x Height: 90 mm/3,5” x 105 mm/4,1”| Net weight: 1,05 kg/2,3 lb | Gross weight: 1,1 kg/2,4 lb| Packages: 1 | L=220mm x W=180mm x H=160mm


| Free Flow 10 L/min | Voltage 12V| Current 40A | Work Cycle 30 min | Work Pressure 60 PSI/4,1 BAR| Inlet Thread ¾” | Outlet Thread ¾” | Work Temperature -20°C up to 40°C| Maximum Suction Height 2m

Optional Itens

| Oil control valve (mod. 5031-New) | Digital meter for lubricant oil (mod. Shark-B01)



suPPly Kits

FOX-GL-B02-110VSupply kit for diesel with by-pass valve. Most used in refueling machines, cars, vans and light trucks.

Features

| Electric supply pump (battery 110 V) | ¾” hose with 4 m/157”| Supply nozzle | By-pass valve | Width x Height: 235 mm/9,2” x 330 mm/13,0”| Net weight: 18,1 kg/40,0 lb | Gross weight: 19,0 kg/41,9 lb| Packages: 1 | L=220 mm x W=180 mm x H=650 mm


| Free Flow 21,1 L/min | Voltage 110 V| Engine Power 370 W | Inlet Thread 1” | Outlet Thread 1” | Work Temperature -20°C up to 40°C

Optional Itens

| Supply nozzle with digital meter (mod. BO-19) | 1” automatic supply nozzle (mod. 5322)


FOX-LT-B02-110VSupply kit for diesel with by-pass valve. Most used in refueling machines, cars, vans and light trucks.

Features

| Electric supply pump (battery 110 V) | ¾” hose with 4 m/157” | Supply nozzle | By-pass valve | Width x Height: 235 mm/9,2” x 330 mm/13,0”| Net weight: 18,1 kg/40,0 lb | Gross weight: 19,0 kg/41,9 lb| Packages: 1 | L=220 mm x W=180 mm x H=650 mm


| Free Flow 80 L/min | Voltage 110 V| Engine Power 370W | Work Pressure 49 PSI/3,4 BAR | Precision ±1%| Inlet Thread 1” | Outlet Thread 1” | Work Temperature -20°C up to 40°C

Optional Itens



FOX-LT-B02-220VSupply kit for diesel with by-pass valve. Most used in refueling machines, cars, vans and light trucks.

Features

| Electric supply pump (battery 220 V) | ¾” hose with 4 m/157” | Supply nozzle | By-pass valve | Width x Height: 235 mm/9,2” x 330 mm/13,0”| Net weight: 18,1 kg/40,0 lb | Gross weight: 19,0 kg/41,9 lb| Packages: 1 | L=220 mm x W=180 mm x H=650 mm


| Free Flow 80 L/min | Voltage 220 V| Engine Power 450W | Work Pressure 49 PSI/3,4 BAR | Precision ±1%| Inlet Thread 1” | Outlet Thread 1” | Work Temperature -20°C up to 40°C

Optional Itens



FOX-GL-B02-220VSupply kit for diesel with by-pass valve. Most used in refueling machines, cars, vans and light trucks.

Features

| Electric supply pump (battery 220 V) | ¾” hose with 4 m/157”| Supply nozzle | By-pass valve | Width x Height: 235 mm/9,2” x 330 mm/13,0”| Net weight: 18,1 kg/40,0 lb | Gross weight: 19,0 kg/41,9 lb| Packages: 1 | L=220 mm x W=180 mm x H=650 mm


| Free Flow 21,1 L/min | Voltage 220 V| Engine Power 450 W | Inlet Thread 1” | Outlet Thread 1” | Work Temperature -20°C up to 40°C

Optional Itens



www.bozza.com 33

suPPly Kits

WOLF-12VSupply kit for diesel and kerosene. Most used in construction sites, boats and agricultural sector.

Features

| Electric supply pump (battery 12V) with by-pass valve | 4 m/157” hose | Manual supply nozzle | Steel suction tube and 2” tank adapter | Width x Height: 350 mm/13,8” x 1200 mm/47,2”| Net weight: 12,4 kg/27,4 lb | Gross weight: 13,2 kg/29,2 lb| Packages: 1 | L=300mm x W=310mm x H=520mm


| Free Flow 76 L/min (20 gal/min) | Voltage 12 V| Work Cycle 30 min | Work Pressure 49 PSI/3,4 BAR | Current 30 A| Fluid Inlet/Outlet 1” | Work Temperature -20°C upt to 60°C

Optional Itens

| Mechanical meter (BZ-6000) | Manual nozzle with digital meter (mod. BO-19)


WOLF-24VSupply kit for diesel and kerosene. Most used in construction sites, boats and agricultural sector.

Features

| Electric supply pump (battery 24V) with by-pass valve | 4 m/157” hose | Manual supply nozzle | Steel suction tube and 2” tank adapter | Width x Height: 350 mm/13,8” x 1200 mm/47,2”| Net weight: 12,4 kg/27,4 lb | Gross weight: 13,2 kg/29,2 lb| Packages: 1 | L=300mm x W=310mm x H=520mm


| Free Flow 76 L/min (20 gal/min) | Voltage 24 V| Work Cycle 30 min | Work Pressure 49 PSI/3,4 BAR | Current 30 A| Fluid Inlet/Outlet 1” | Work Temperature -20°C up to 60°C

Optional Itens

| Mechanical meter (BZ-6000) | Manual nozzle with digital meter (mod. BO-19)


Reels in application


accessOries

5222Supply nozzle used for high flow with fuels in general.

5022Supply nozzle used for fuels in general.

Features

| 3/4” manual supply nozzle | Width x Height: 45 mm/1,8” x 120 mm/4,7”| Net weight: 0,61 kg/1,36 lb | Gross weight: please inquire| Package information please inquire

Features

| 1.1/2” automatic supply nozzle | Width x Height: 60 mm/2,3” x 250 mm/9,8”| Net weight: 7,5 kg/16,5 lb | Gross weight: please inquire| Package information please inquire


| Maximum Free Flow 260 L/min | Input Diameter 1.1/2” NPT | Tip Diameter 38 mm| Maximum Work Pressure 43,5 PSI/3 BAR


| Maximum Free Flow 50 L/min | Input Diameter 3/4” NPT | Tip Diameter 15/16”| Maximum Work Pressure 43,5 PSI/3 BAR

5522Automatic supply nozzle used for fuels in general.

Features

| 3/4” automatic supply nozzle | Width x Height: 55 mm/2,2” x 165 mm/6,5”| Net weight: 1,1 Kg/2,4 lb | Gross weight: please inquire| Package information please inquire


| Maximum Free Flow 75 L/min | Input Diameter 3/4” NPT | Tip Diameter 13/16” | Maximum Work PRessure 43,5 PSI/3 BAR




5322Automatic supply nozzle used for high flow with fuels in general.

Features

| 1” automatic supply nozzle | Width x Height: 60 mm/2,3” x 155 mm/6,1”| Net weight: 1,65 kg/3,64 lb | Gross weight: please inquire| Package information please inquire


| Maximum Free Flow 120 L/min | Input Diameter 1” NPT | Tip Diameter 1.3/16” | Maximum Work Pressure 43,5 PSI/3 BAR


NOZZLE FOR ARLA 32Supply nozzle used for Arla 32.

Features

| 3/4” manual supply nozzle | Width x Height: 380 mm/15” x 150 mm/5,9”| Package information please inquire


| Maximum Free Flow 60 L/min | Input Diameter 3/4” NPT


www.bozza.com 35

accessOries

LUBRIFIL 1/2”Suitable for filtering, pressure regulation and lubrication of compressed air networks.

Features

| Air preparation unit | Width x Height: 70 mm/2,8” x 205 mm/8,0” | Width with manometer and support: 102 mm/4,0”| Net weight: 0,8 kg/1,9 lb | Gross weight: please inquire| Package information please inquire

NOTE: Recommended use with mineral oil, no additives, with SAE 10 or ISOVG 32 viscosity.


| Pressure Regulation 7,25 - 116 PSI (0,5 - 8 BAR) | Inlet Female Thread 1/2” NPT | Outlet Female Thread 1/2” NPT | Manometer Female Thread 1/8” NPT| Air Free Flow 1400 L/min


LUBRIFIL 1/4”Suitable for filtering, pressure regulation and lubrication of pneumatic equipments.

Features

| Air preparation unit | Width x Height: 55 mm/2,2” x 160 mm/6,3” | Width with manometer and support: 103 mm/4,0”| Net weight: 0,3 kg/0,74 lb | Gross weight: please inquire| Package information please inquire

NOTE: Recommended use with mineral oil, no additives, with SAE 10 or ISOVG 32 viscosity.


| Pressure Regulation 7,25 - 116 PSI (0,5 - 8 BAR) | Inlet Female Thread 1/4” NPT | Outlet Female Thread 1/4” NPT | Manometer Female Thread 1/8” NPT| Air Free Flow 650 L/min


FL2000Suitable for compressed air filtering and pressure regulation.

Features

| ¼” compressed air pressure filter regulator | Width with manometer and support: 900 mm/35,4”| Width x Height: 400 mm/15,7” x 160 mm/6,3” | Net weight: 0,3 kg/0,6 lb | Gross weight: please inquire| Volume: please inquire| Package information please inquire


| Maximum Work Pressure 135 PSI (9BAR) | Air Free Flow 650 L/min | Manometer Thread 1/8” NPT | Air Entry Thread 1/4” NPT| Air Outlet Thread 1/4” NPT

310-C-NEWSIndicated to apply grease on lubricating pins of various machineries and equipments.

Features

| Universal hydraulic coupler | 4 coupling claws for lubricating pins | Retention valve to prevent grease reflow


| Diameter 14 mm/0,55” | Work Pressure 5,000 PSI / 344 BAR | Inlet Female Thread 1/8“ NPT

Optional Itens

| 300mm flexible extension (mod. 5651)| 500mm flexible extension (mod. 5651-A)| Rigid extension (mod. 319)



2030-GIndicated to apply grease on 16mm/0,62” flat lubricating pins of machinery and several equipments.

Features | Hydraulic coupler (button type) | Width x Height: 55 mm/2,2” x 27 mm/1,1”| Net weight: 0,046 kg/0,1lb | Gross weight: 0,96 kg/2,1 lb (package with 20 pieces)| Package information please inquire


| Work Pressure 3,000 PSI/207 BAR | Thread 1/8” NPT

Optional Itens




accessOries

2031-GIndicated to apply grease on 22mm/0,86” flat lubricating pins of machinery and several equipments.

Features

| Hydraulic coupler (giant button type) | Width x Height: 37 mm/1,5” x 42 mm/1,65” | Net weight: 0,086 kg/0,189 lb | Gross weight: 1,37 kg /2,92 lb (package with 15 pieces)| Package information please inquire


| Work Pressure 7,500 PSI/517 BAR | Thread 1/8” NPT

Optional Itens



7302Swivel connection to facilitate the handling of the grease valve (mod. 5040) and hose at the lubrication time, providing 360° rotation.

Features

| Swivel connection in “Z” | Width x Height: 120 mm/4,7” x 70 mm/2,8”| Net weight: 0,30 kg/0,65 lb | Gross weight: 24,2 kg/53,3 lb (package with 80 pieces)| Package information please inquire


| Female Thread 1/4” NPT | Male Thread 1/8” NPT | Maximum Work PRessure 6.000 PSI/413 BAR

3032Pressure regulator for compressed air.

Features

| Pressure regulator | Width x Height: 9 mm/0,35” x 75 mm/2,9” | Width with manometer and support: 103 mm/4,0”| Net weight: 0,18 kg/0,4 lb | Gross weight: please inquire| Package information please inquire


| Pressure Regulation 7,25-116 PSI (0,5 - 8 BAR) | Inlet Female Thread 1/4” NPT | Outlet Female Thread 1/4” NPT | Manometer Female Thread 1/8” NPT



6722Swivel union to facilitate the handling of the supply nozzles (mod. 5022/5522) connected in supply hoses with 360° rotation.

Features

| Swivel union (allows 360° rotation) | Length: 105 mm/4,1”| Net weight: 0,19 kg/2,8 lb | Gross weight: 0,21 kg/0,5lb| Package information please inquire


| Inlet Thread 3/4” NPT | Outlet Thread 3/4” NPT| Maximum Work Pressure 43,5 PSI/3 BAR


6822Swivel union to facilitate the handling of 1” supply nozzles connected in supply hoses with 360° rotation.

Features

| Swivel union (allows 360° rotation) | Length: 105 mm/4,1”| Net weight: 0,19 kg/2,8 lb | Gross weight: please inquire| Package information please inquire


| Inlet Thread 1” NPT | Outlet Thread 1” NPT| Maximum Work Pressure 43,5 PSI/3 BAR


www.bozza.com 37

accessOries

6622-BDesigned to be installed on fuel pump hoses, with a breakway system - which separates when subjected to a certain traction force, blocking the fuel flow in both directions, preventing spills and protecting the supply equipments.

Features

| Hose safety valve - Breakaway | Exclusive project with double valve| Easily reconnectable| Width x Height: 50 mm / 1,77” x 110 mm / 4,33” | Net weight: 333 g/0,73 lb| Package information please inquire


| Free Flow 90 L/min | Inlet Connection 1” NPT | Outlet Connection 1” NPT| Work Pressure 246 PSI/17 BAR

510Quick coupler used to connect compressed air hoses to pneumatic equipments.

Features

| Quick coupler for compressed air | Length: 70 mm/2,8” | Larger diameter: 30 mm/1,2”| Net weight: 0,110 kg/0,24 lb| Package information please inquire


| Female Thread 1/4” NPT | Male Pin 1/4” NPT | Work Pressure 150 PSI/10,3 BAR



6622Designed to be installed on fuel pump hoses, with a breakway system - which separates when subjected to a certain traction force, blocking the fuel flow in both directions, preventing spills and protecting the supply equipments.

Features

| Hose safety valve - Breakaway | Exclusive project with double valve| Easily reconnectable| Width x Height: 45 mm / 1,77” x 110 mm / 4,33” | Net weight: 257 g/0,57 lb| Package information please inquire


| Free Flow 60 L/min | Inlet Connection ¾” NPT | Outlet Connection ¾” NPT| Work Pressure 246 PSI/17 BAR


6522Designed to be installed on fuel pump hoses, with a breakway system - which separates when subjected to a certain traction force, blocking the fuel flow in both directions, preventing spills and protecting the supply equipments.

Features

| Hose safety valve - Breakaway | Width x Height: 35 mm / 1,37” x 120 mm / 4,72”| Net weight: 272 g/0,6 lb | Gross weight: please inquire| Package information please inquire


| Work Pressure 246 PSI/17 BAR | Inlet Connection ¾” NPT | Outlet Connection ¾” NPT| Free Flow 60 L/min



accessOries

FILTER-B01Suitable for some pneumatic and manual oil pumps models.

Features

| Filter screen for the retention valve | Net weight: 0,019Kg / 0,041lb| Package information please inquire


| Filter screen 150 microns| Thread 1” BSP

5031-NEWValve to apply oil lubricant directly into engine reservoirs and in several equipments.

5040Valve to apply grease on lubricating pins of machineries and equipments.

Features

| Grease control valve | Width x Height: 260 mm/10,2” x 180 mm/7,1”| Net weight: 0,78 kg/1,7 lb | Gross weight: 0,9 kg/2,0 lb

Features

| Oil control valve | Trigger actuation lock| Anti-dropping nozzle (mod. TIPSHARK-B01)| Length: 550 mm/21,6”| Net weight: 1,170 kg/2,6 lb| Package information please inquire


| Hose Inlet Female Thread 1/2” NPT | Work Pressure 1.450 PSI/100 BAR


| Maximum Work Pressure 7.500 PSI /517 BAR | Hose Inlet Female Thread 1/8” NPT | Extension Inlet Female Thread 1/8” NPT | Coupler Inlet Male Thread 1/8” NPT

Optional Itens

| Swivel connection (mod. 7302) | Rigid extension (mod. 319) | Flexible extension (mod. 5651 and mod. 5651-A)




METERSHARK-B01

Features

| Oil digital meter (used with Shark-B01 meter) | Net weight: 0,510 kg / 1,124lb| Gross weight: 4,481Kg / 9,878lb| Pieces per box: 8un| Volume: 0,02300m³| Package information please inquire


| Maximum Free Flow 35 L/min| Minimum Free Flow 1 L/min| Work Pressure 1,450 PSI/100 BAR | Inlet Thread 1/2” NPT | Outlet Thread 1/2” NPT | Precision ± 0,5% Illustrative Picture

www.bozza.com 39

rePair Kits

BOZZA is the pioneer company in equipments for lubrication and mobile units in Brazil

Tradition of over 60 years

High quality brand - reference in Brazil and abroad

Complete solution for lubricantion equipments

Special projects to meet your needs

Customized support throughout Brazil and in the five continents of the world

Highly trained after-sales service

Commitment with established deadlines

Qualified training on how to use the equipments and their maintenance

Products with the best cost-effectiveness in our market

ContactsBoard of Directors [email protected] Marketing [email protected] Trade Sales [email protected] Financing [email protected] Service [email protected] Technical Assistance [email protected]

Why buy BOZZA?

REPAIR KITSBOZZA offers several kits to repair your equipments, ensuring the quality and the original performance of all your products. These parts are carefully selected and must completely replace the old parts.

IMPORTANT!Do not compromise the life time of your equipment using parallel repair kits, always buy BOZZA’S ORIGINAL REPAIR KITS, because only they can provide full compatibility with your product.

Kits Options

| Kits for Pneumatic Pumps Injectors | Kits for Pneumatic Pumps Engines| Kits for Manual Pumps| Kits for Accessories



José Murília BOZZA Comércio e Indústria Ltda.Rua Tiradentes, 931 | Bairro Santa Terezinha09780-001 | São Bernardo do Campo | SP

Tel: +55 11 2179 [email protected]

W W W. B O Z Z A . C O M

Date post:	07-Feb-2016
Category:	Documents
Upload:	bozza
View:	235 times
Download:	1 times

BOZZA | Product Catalog 2013/2014

Documents