Regin Ready-Steady-Go valves

We at Regin want to make installation easy for you. We call it Ready-Steady-Go. A good example is our FRS valve, which is a replacement for older STL valves (TA valves). The FRS valve has high control precision and is fully sealed when closed. Installation is facilitated by measurements designed for installing between flanges, turnable flange connections and pre-mounted flange seals.

The FRS valves’ dimensions, turnable flange connections and pre-mounted flange seals make installation quick and easy.

Complete solutions – valve with actuatorRegin can also offer you the actuators you need. If you want to use other actuator brands, we have a complete collection of suitable adapters.

Valves for Honeywell actuators

If you use Honeywell actuators, we have a special series of valves that are designed to fit the actuators.

Regin’s valve calculator simplifies the selection of the right valve for the application - eliminating the risk of over-dimensioning.

V A L V E S & A C T U A T O R SV A L V E S & A C T U A T O R S

R E G I N – T H E C H A L L E N G E R I N B U I L D I N G A U T O M A T I O N

BR–V

ALVE

S–EN

200

8-12

w

ende

lbo.

com

Sales office FranceRegin Controls SARL

32 rue Delizy,

93500 Pantin

Phone: +33 (0)1 41 71 00 34

Fax: +33 (0)1 41 71 46 46

Website: www.regin.fr

Sales office GermanyRICCIUS + SOHN GmbH

Haynauer Str. 49,

12249 Berlin

Phone: +49 (30) 77 99 4 0

Fax: +49 (30) 77 99 4 13

E-mail: info@riccius-sohn.eu

Website: www.riccius-sohn.eu

Sales office SingaporeRegin Controls Asia Pacific Pte Ltd 66 Tannery Lane,

# 03-04 Sindo Building,

Singapore 347805

Phone: +65 6747 8233

Fax: +65 6747 9233

E-mail: info@regin.com.sg

Website: www.regin.com.sg

Sales office Hong KongRegin Controls Hong Kong Limited

Room 2901, EW International Tower,

120 Texaco Road,

Tsuen Wan, NT,

Hong Kong

Phone: +852 2407 0281

E-mail: info@regin.com.hk

Website: www.regin.com.hk

Box 116, 428 22 Kållered,

Sweden

Phone: + 46 (0)31-720 02 00

Fax: + 46 (0)31-720 02 50

E-mail: info@regin.se

Website: www.regin.se

AB Regin Head office, Marketing, Sales and Logistics

OSBY OAB

Valves & ActuatorsFor energy-efficient comfort heating, cooling, HVAC and domestic hot water systems Kv 0.25 - 310

V A L V E S & A C T U A T O R S

0%leakage

CO

MPLETELY TIGH

T

0%leakage

CO

MPLETELY TIGH

T

With a tradition in the valve industry that extends back to the 1920s, Osby Armatur (OAB) is a strong brand within valve technology. This tradition and expertise lives on at our production site in Osby. There we develop, install and test our valves whereas the production of our components is contracted out.

Energy efficient systems put great demands on valve characteristics

The precision and performance of valves are decisive factors in creating an energy-efficient system. Therefore, Regin’s production centre in Osby places great emphasis on developing high control precision and fully sealed valves. Being a front-runner in the valve industry, Regin can now offer three new series of valves. All of them were developed using new technology making them all bubble tight when closed, which minimizes energy losses. The valves are available in dimensions up to DN 150. Gradually, this technology will be applied to other series of valves, as well.

Valves and actuators for energy-efficient systemsSave energy using Regin OAB-valves

In most systems for comfort and hot water production, the valves are over-dimensioned*, especially in older installations. Traditionally, valves were selected to tolerate the most extreme conditions in order to be on the safe side. As a result, the valves were over-sized in normal operating conditions and only a part of their stroke was being used. By installing a valve with the correct Kvs value, high control precision and valve authority and more stable control are achieved, as well as a more energy efficient operation. If you choose an OAB-valve from the Regin product series you will both minimise energy costs and save the environment.

* Source: ”Marginaler i Fjärrvärmesystem”, Forskning och Utveckling 2003:85 and ”Konsekvenser av mindre styrventiler i distributionsnät”, Forskning och Utveckling 2004:105

Regin’s valves are marketed under the name OAB; a brand which stands for high quality performance.

V A L V E S & A C T U A T O R S

V A L V E S & A C T U A T O R S

Cooling ceiling/cooling bafflesVHR valve RTAM… actuator

Ventilation systemVMXT zone valve MRT… valve BTV valve RVA5… actuator

Fan-coil unit heating/coolingVHR valve RTAM… actuator

Radiators FVR valve RTAM… actuator

Cooling systemGTVS valve RVA actuator

Heating GTVS valve

RVA actuatorDomestic hot water

MTRS valve RVA actuator

District heating

NTVS valve 2SAS valve 2SBS valve FRS valve

RVA actuator

District cooling

NTVS valve 2SAS valve 2SBS valve FRS valve

RVA actuator

BTV/BTR2-way and 3-way valves

Kvs: 0.63 – 39 DN: 15 – 50

RVA5Control signal: 3-point or 0…10V Force: 500N

Stroke time: 60 s

MRT For hot and cold water

2-way

Kvs: 1.0 – 4.0 DN: 20 – 25

With outside thread

GTVSFor hot and cold water, district heating systems, cooling systems and steam

2-way

Kvs: 27 – 310 DN: 40 – 150

RVAControl signal: 3-point or 0…10V Force: RVA5 500N RVA10 1000N RVA18 1800N RVA25 2500N

GTRSFor hot and cold water, district heating systems, cooling systems and steam

3-way

Kvs: 27 – 310 DN: 40 – 150

VHR2-way

Kvs: 0.7 – 1.5 DN: 10 – 25

RTAM – Thermal actuatorSupply voltage: 24 V AC/DC or 230 V AC Control signal: On/off or 0…10 V Force: 100N

FVR2-way

Kvs: adjustable 0.01...1.1 DN: 10 – 25

Adapters

Adapters for valves of different brands: TA, Oventrop, Cazzaniga, MMA, Danfoss. Heimeier

Zone valves

2-way and 3-way valves

For individual room control and for example control of baffles/batteries, hot/cold water, fan convectors, and after-heaters/after-coolers

Kvs: 0.25 – 6.3 DN: 15 – 25

MVTSupply voltage: 24 V AC/DC Control signal: 3-point or 0…10 V Force: 200N

Valve with actuator DFCM2-way and 3-way valves

Kvs: 3.2 – 5.7 DN: 15 – 25 Supply voltage: 230V AC Control signal: On/off

MTRS3-way valves

Kvs: 0.63 – 39 DN: 15 – 50

RVAF5Control signal: 3-point or 0…10V Force: 500N Stroke time: 30 s

Radiators, underfloor heating, fan-coil and chilled ceilings

Domestic hot water

Heating, cooling and ventilation systems, cold/hot and steam

V A L V E S & A C T U A T O R S

0%leakage

CO

MPLETELY TIGH

T

For heating and ventilation systems (adjusted to Honeywell actuators)

NTVS*For hot and cold water, district heating systems, cooling systems and steam

2-way

Kvs: 1.0 – 310 DN: 15 – 150

RVAControl signal: 3-point or 0…10V Force: RVA5 500N RVA10 1000N RVA18 1800N RVA25 2500N

2SAS-, 2SBSFor hot and cold water -5°C to +150°C (is also available for higher temp)

2-way

Kvs: 0.63 – 160 DN: 15 – 100 Temp area: -5°C – 185°C

FRS/FRSD*For hot and cold water (is also avail-able for higher temp)

2-way

Kvs: 1.0 – 20 DN: 20 – 65 Temp area: -5°C – 150°C

(Replaces TA´s STL valves)

For adaption of Regin's valves to actuators from Belimo, TAC Forta, Siemens and Con-trolli. Adapter and stem extension included.

Intended for NTVS/GTRS/GTVS, 2SAS/2SBS, MTVS/MTRS, MRT and FRS.

Valves and actuators for district heating and cooling

Adapter kits

For district heating (adjusted to Honeywell actuators)

Protects the spindle against freezing.

Intended for STV/STR, MMV/MMR, GTRS, GTVS, 2SAS/2SBS NTVS, MRT and FRS

Spindle heater

V 176 A2-way

For hot/cold water systems and steam

Kvs: 0.4 – 160 DN: 15 – 100 Temp area: -5°C – 185°C

V538 C33-way

For heating and ventilation systems

Kvs: 2.1 – 34 DN: 15 – 50 Temp area: -5°C – 185°C

V 538 C6 flanged3-way

For hot/cold water systems and steam

Kvs: 34 – 310 DN: 50 – 150 Temp area: -5°C – 120°C

V A L V E S & A C T U A T O R S

*DIN Standard

0%leakage

CO

MPLETELY TIGH

T

0%leakage

CO

MPLETELY TIGH

T

V A L V E S & A C T U A T O R S

Everything you need for a complete system

Integrated systems with web solutionsThe Regin System has everything you need to create integrated systems for building automation. Products that are included are, for example, EXOflex, a freely programmable controller with modular design, and EXOcompact, a range of freely programmable controllers for heating, cooling and zone control, etc. The Regin System also contains SCADA systems and different solutions for access via the Internet and integration with other systems.

Corrigo ECorrigo E is a range of controllers for heating, domestic hot water, air handling, zone control and cooling. Corrigo E is available with communication (TCP/IP, Modbus, LON etc.) for integration into systems.

RegioRegio is a range of room controllers for heating, cooling and ventilation etc. in different zones. Using Regio you can build up everything from stand-alone systems for one room and communicating systems for several rooms to freely programmable systems for a building with comprehensive SCADA.

OptigoOptigo is a universal controller, which solves all basic control needs in a cost-effective way. Optigo is delivered with applications for ventilation systems, heating and domestic hot water systems as well as pressure, CO2 and humidity.

Sensors and transmittersRegin has a wide range of sensors and transmitters for temperature, pressure, CO2, occupancy, air and humidity.