CAD model verification of a simple bracket
sheet metal model
•Objective•Cad model•Manufacturing sheet.•Fea model•Basic analysis methods implemented.•Loading condition with respect to the analysis methods.•Material and property•The results•conclusion
objectiveTo do some thing “”FTP””
To verify the analytical skills with the help of CAD/CAE tool and also with the microsoft tool.
To verify the tool knowledge to achieve the goal.
The CAD model
Manufacturing model• 2.5mm sheet with aluminum alloy • 2.5mm sheet with aluminum alloy
Outer face with offseted FEA model
Static anayysis of bracket1. Static analysis:-
I. Distributive load of magnitude 100N in four different bolt location. The load will vary from max to zero with respect to theta(θ).
II. Six degree of freedom constrain at other four bolt location
Load and boundary condition in static analysis
Load and boundary condition for static x-directional loading
Load and boundary condition for static y-directional loading
Load and boundary condition for static y-directional loading
Material selected for the component and its
Engineering property for analysis
Material and property• Aluminum alloy with SI unit
YOUNGS MODULUS
SHEAR MODULUS
POISIONS RATIO DENSITY YIELD_STRESS_VALU
E
7.00E+04 2.632E+04 0.33 2.80E-09 3.50E+04
Analysis results• Static analysis result
• X-directional load case• Spc-force & External force• Max- displacement and vonmises stress value and
region plot• y-directional load case
• Spc-force & External force• Max- displacement and vonmises stress value and
region plot• z-directional load case
• Spc-force & External force• Max- displacement and vonmises stress value and
region plot
Static analysis results for subcases
• X-directional load case• y-directional load case• z-directional load case
X-DIRECTIONAL LOAD CASE
Reaction force and external force result in Static analysis for x-directional loading
Spc- force External force
X-directional load-caseMax displacement result Max vonmises stress result
y-DIRECTIONAL LOAD CASE
Reaction force and external force result in Static analysis for y-directional loading
Spc- force External force
y-directional load-caseMax displacement result Max vonmises stress result
z-DIRECTIONAL LOAD CASE
Reaction force and external force result in Static analysis for z-directional loading
Spc- force External force
IT HAS TO BE FILLED
TO BE FILED
TO BE FILED
CONCLUSIONTHIS IS JOST THE BEGINNING
PICTURE ABHI BAKIHE
With thanks,Manas Ranjan Ray