Date post: | 13-Apr-2017 |
Category: |
Engineering |
Upload: | vaibhav-morarka |
View: | 86 times |
Download: | 8 times |
Brady & Morris Engineering Co. Ltd.www.bradymorris.in
W.H. Brady & Co. Ltd.
Established in 1895Listed on the Bombay Stock Exchange Provides Products & Services for the Aviation Industry
Website: www.whbrady.in
●●●
Established in 1946Listed on the Bombay Stock ExchangeManufacturing Material Handling Equipment for over 50 YearsAn ISO9001:2015 & OHSAS 18001 Registered CompanyManufacturing Plant: Bareja Industrial Area, GIDC Gujarat
Website: www.bradymorris.in
●●●
●
●
●●
●
Established in 1999An ISO9001:2008, ISO14001:2015 & OHSAS 18001 Registred CompanyProvides Specialised Facilities Management Services
Website: www.bradyservices.in
Brady & Morris Engineering Co. Ltd.
Brady Services Pvt. Ltd.
Bradys GroupBrady & Morris Engineering Co. Ltd.
www.bradymorris.in
Bradys Group,Registered Office,Mumbai
Corporate Office : New DelhiRegistered Office : MumbaiBranch Office : KolkataFactory : Ahmedabad
Dealer LocationsSales Representatives
Pan IndiaPresence
BRADYS GROUP
Product RangeBrady & Morris Engineering Co. Ltd.
www.bradymorris.in
Electric Overhead
Cranes
01Manufacturing up to 150T CapacityModular Standard & Customised Designs as per IS3177, IS807Customised Design available for Steel Duty Grade Application as per IS4137, IS807 Customised Design possible as per DIN, CMAA & FEM StandardsAvailable in Flame-proof or Explosion-proof modelAvailable in Class IV Model (Heavy and Continuous Use)Available in Semi-Electronic Model (Semi-EOT)Available in Geared-Motor Arrangement for minimum sound and weight (Prefered Internationally and by MNCs)Approved by MN Dastur, MECON, Tata Consultancy, NMDC, Delhi Jal Board, Engineering India Ltd., DCPL, L&T, CET, SAIL, CIDC and other Govt. & Private entities Exported to Africa, South Asia, South-East Asia and the Middle East
●●●●●●●●
●
●
70T Overhead Crane
60T Overhead Crane
20T Overhead Crane
3T DG FLP EOT Crane
HandOperated
Cranes
02Manufactruing up to 50T CapacityModular Standard and Customised Design as per IS3177Available in Flame-proof or Explosion-proof modelAvailable in Hybrid Semi-EOT modelAvailable in Short-Headroom ModelApproved by MN Dastur, MECON, Tata Consultancy, NMDC, Delhi Jal Board, Engineering India Ltd., DCPL, L&T, CET, SAIL, CIDC and other Govt. and Private entities Exported to Africa, South Asia, South-East Asia and the Middle East
●●●●●●
●
Under Slung Cranes
03Manufactruing up to 25T CapacityModular Standard and Customised Design as per IS3177Available in Flame-proof or Explosion-proof modelApproved by MN Dastur, MECON, Tata Consultancy, NMDC, Delhi Jal Board, Engineering India Ltd., DCPL, L&T, CET, SAIL, CIDC and other Govt. and Private entities Exported to Africa, South Asia, South-East Asia and the Middle East
●●●●
●
4T Underslung Crane
Gantry Cranes
04Manufacturing up to 100T CapacityModular Standard & Customised Designs as per IS3177, IS807Available in Class IV Model (Heavy and Continuous Use)Available in Manual, Electronic & Semi-EOT ModelsAvailable in Semi-Gantry ModelAvailable in Geared-Motor Arrangement for minimum sound and weight (Prefered Internationally and by MNCs)Customised Design possible as per DIN, CMAA & FEM StandardsApproved by MN Dastur, MECON, Tata Consultancy, NMDC, Delhi Jal Board, Engineering India Ltd., DCPL, L&T, CET, SAIL, CIDC and other Govt. and Private entities Exported to Africa, South Asia, South-East Asia and the Middle East
●●●●●●
●●
●
10T+10T Gantry Crane
Jib Cranes
05Manufacturing up to 10T Capacity for Pillar Mounted & Wall Mounted Jib CranesManufacturing as per IS15419Both Manual and Electric Options availablePillar & Wall Mounted cranes can be CustomisedManufacturing up to 2.5T Capacity for Portable Jib Crane which is manually operatedApproved by MN Dastur, MECON, Tata Consultancy, NMDC, Delhi Jal Board, Engineering India Ltd., DCPL, L&T, CET, SAIL, CIDC and other Govt. and Private entities Exported to Africa, South Asia, South-East Asia and the Middle East
●●●●●●
●
2.5T Portable Jib Crane
500Kgs Pillar Mounted
Jib Crane
06Manufacturing up to 50T CapacityModular Standard & Customised Designs as per IS3938Available in Light weight Standard NX Model (Up to 2T)Available in Flame-proof or Explosion-proof modelAvailable in Class IV Model (Heavy and Continuous Use)Available in Short-Headroom ModelCustomised Design possible as per DIN, CMAA & FEM StandardsApproved by MN Dastur, MECON, Tata Consultancy, NMDC, Delhi Jal Board, Engineering India Ltd., DCPL, L&T, CET, SAIL, CIDC and other Govt. and Private entities Exported to Africa, South Asia, South-East Asia and the Middle East
●●●●●●●●
●
5T ElectricWire Rope Hoist
NX Model ElectricWire Rope Hoist
20T Dual Drum Hoist
Electric Chain Hoist
07Manufacturing up to 10T CapacityModular Standard & Customised Designs as per IS6547Available with Power Trolley, Boogie Trolley, Geared Trolley, Push-Pull Trolley, Hook Suspension and Lug SuspensionAvailable in Dual Speed ModelApproved by MN Dastur, MECON, Tata Consultancy, NMDC, Delhi Jal Board, Engineering India Ltd., DCPL, L&T, CET, SAIL, CIDC and other Govt. and Private entities Exported to Africa, South Asia, South-East Asia and the Middle East
●●●
●●
●
ElectricWinch
08Manufacturing Up to 20T CapacityCustomised and Standard Model availableAvailable in Class IV Model (Heavy and Continuous Use)Approved by MN Dastur, MECON, Tata Consultancy, L&T, CET, SAIL, CIDC and other Govt. and Private entities Exported to Africa, South Asia and South-East Asia
●●●●
●
10T Electrical Winch
09All blocks are manufactured as per IS3832Manufacturing up to 50T Capacity RS Model Chain Pulley Block (ISI up to 5T)Manufacturing up to 10T Capacity ES Model Chain Pulley Block (Fully enclosed Standard Block)Manufacturing up to 20T Capacity Light Weight NX model Chain Pulley Block (Standard Block)Manufacturing up to 50T Capacity Geared Travelling TrolleyRS Model is Available in Short-Headroom and slight customisation is possible RS Model is available in a Non-Sparking/Flame-proof ModelApproved by MN Dastur, MECON, Tata Consultancy, NMDC, Delhi Jal Board, Engineering India Ltd., DCPL, L&T, CET, SAIL, CIDC and other Govvernmentand Private entities (All Models)Exported to Africa, South Asia, South-East Asia and the Middle East (All Models)
●●●
●
●●●●
●
Chain Pulley Block & Geared
Travelling Trolley
Chain Pulley Blocks
Services OfferedBrady & Morris Engineering Co. Ltd.
www.bradymorris.in
Equipment recommendation by study of application & site
Equipment customisation based on FEM, CMAA, DIN & IS standards
Erection and commissioning of Equipment (of all brands)
Repair of equipment (of all brands as long as drawings of equipment is available)
Complete refubishment of cranes
●
●
●
●
●
Machines
Manufacturing FacilityPlot 326/B, Sarsa Kanera Road,
Taluka Matar, Bareja Distt Kheda, Gujarat - 387530
EHB/ECH & CPB/GTT Testing Facility
Crane Testing Facility
Painting Facility
Design TeamsBrady & Morris Engineering Co. Ltd.
www.bradymorris.in
Separate Heads for Cranes and Hoists
Separate Head for Electrical Design
Over 15 highly qualified Design Engineers (Electrical and Mechanical)
Autocad, Stadd-Pro, Kissoft and Solid Works used
●
●
●
●
Inward InspectionAll machined components are inspected with respective drawings and with calibrated instrumentsRaw materials like EN-8, EN-19, EN-24, EN-31 etc. are tested for chemical analysis at an independent labHardened components are checked for Hardness testingIf required critical components are verified with D.P. testBought-out items like Motors, Wire Ropes, Load Chains etc.,are accepted based on manufacturer Test Certificates
In Process InspectionComponents as against drawing requirements are verified for marking and dimensionAll sub assembly is verified visually for completeness of operationAll matching items are verified for lapping and free movement
●
●
●●●
●
●●
“We take quality very
seriously.”
Internal Inspection of EquipmentAll inspections are carried out in our premisesIS standard load tests are carried out for 100% of the equipment manufactured whether it is a crane or a chain pulley blockPainting inspection is carried out for 100% of the equipment manufacturedPacking inspection is carried out for 100% of the equipment manufacturedPacking list is made individually for all orders
In Process InspectionInternal inspection reports are made for 100% of the equipment manufacturedCustomised packing lists are made for 100% of the equipment manufacturedSerial numbers for each equipment manufactured is recorded for easy identification
●●
●
●
●
●
●
●
“We take quality very
seriously.”
Office AddressesBrady & Morris Engineering Co. Ltd.
www.bradymorris.in
Registered OfficeBrady House,12/14, Veer Nariman Road, Fort, Mumbai 400001 IndiaPhone: +91 22 22048361 - 65 Fax: +91 22 22041855E-mail: [email protected]
WorksPlot 326/B, Sarsa Kanera Road, Taluka Matar, Bareja Distt KhedaGujarat – 387530
Sales OfficesBrady & Morris Engineering Co. Ltd.
www.bradymorris.in
MumbaiBrady House,12/14, Veer Nariman Road, Fort, Mumbai – 400001 Phone: +91 22 22048361 - 65 Fax: +91 22 22041855E-mail: [email protected]
Delhi14/15, F Block,Connaught Place, New Delhi – 110001 Phone: +91 11 23314934 Fax: +91 11 23327231 Email:[email protected]
KolkataKolkata Commercial Point,1st Floor, 79 Lenin Sarani, Kolkata – 700013 Phone: +91 33 22272089, 22276721�Fax: +91 33 22272098E-mail: [email protected]
AhmedabadPlot 326/B, Sarsa Kanera Road, Taluka Matar, Bareja Distt KhedaGujarat – 387530Phone: +91 (0) 2694304200 �E-mail: [email protected]
ChennaiPhone: +91 44 24310618, 24310509 �Fax: +91 44 24335135�E-mail: [email protected] �
ClientsBrady & Morris Engineering Co. Ltd.
www.bradymorris.in
Consultants, EPCs & Public
Sector Units
Cement Industry
Power, Metals & Minerals
Steel, Textile, Sugar, Paper,
Chemical & Fertilizer
Docks, Ports & Water Projects
Internatioal Clients