12
BRAND PAGE
LANGSTON
Female & Male Score Heads 1
Bottom Strippers 1
Wear Inserts 1
Pulley Yokes 2
Stitch Tab Knives 2
Steel-to-Steel Tab Knives 2
Nuts & Bolts 2
S&S
Pull Rolls 3
Primary Score Heads 3
Stitch Block Assemblies 3
Jiffy Shoes 4
Outer Race Rollers (Roller Races) 4
Traverse Split Nuts 4
WARD
Bottom Strippers 5
Pull Rolls 5
Carbon Buttons 5
Stitch Block Assemblies 6
Urethane Score Inserts 6
STANDARD SCORE PROFILES 7
OTHER PARTS 8-9
INDEXCorrugated Replacements, Inc. provides high-precision and top-quality parts to the corrugated industry.
We offer a rapid delivery . Uptime is crucial to the volatile corrugated industry, and we know rapid delivery is an essential.
This catalog features our best-selling products. All of these products are available online at www.corrugatedparts.com. We also offer over 70,000 items in our active inventory. The majority of these items are produced in-house where we exercise direct quality control. If you need any assistance with a part, please call our friendly and helpful sales team at 1.800.969.0881.
Thank you for your business!
LANGSTONPART NUMBER OEM NUMBER PRODUCT NAME DESCRIPTION PHOTO
CR-30461 410610 Female Score Head 37.5"(6" Diameter) 1
CR-30134 410600 Female Score Head 50" (6.5" OD x 4.225" ID x .982" W) 2
CR-410290-R 410594 Male Score Head 37.5" 3
CR-4156-RS 410590 Male Score Head 50" 4
Langston score heads (saturn female & male)
D-178D-B38 411049 Bottom Stripper Holder (⅜" Thick, Brass) 5
D-178D-S38 411049 Bottom Stripper Holder (⅜" Thick, Steel) 6
D-178B-B38 411055 Bottom Stripper Holder (⅜" Thick, Brass) 7
D-178B-S38 411055 Bottom Stripper Holder (⅜" Thick, Steel) 8
D-178C-B38 411054 Bottom Stripper Holder (⅜” Thick, Brass) 9
D-178C-S38 411054 Bottom Stripper Holder (⅜" Thick, Steel) 10
19427-B38 415977 Bottom Stripper Holder (⅜" Thick, Brass) 11
Langston BOTTOM STRIPPERS
Langston wear insertsCR-30110 256246 Wear Insert (Yoked Head) 12
To Order:Call: 1.800.969.0881Order Online: www.corrugatedparts.comEmail: [email protected]
page 1
1 2 3 4
5 6 7 8
9 10 11 12
CR-108 T-Slot Bolt Square Head (Size of Thread: 1/2 x 13” Length: 1 1/2" Head Diameter: 7/8" x 7/8" x 1/4") 12
CR-120 T-Slot Bolt Square Head (Size of Thread: 1/2 x 13” Length: 2 1/2" Head Diameter: 7/8" x 7/8" x 1/4") 12
CR-124 T-Slot Bolt Square Head (Size of Thread: 1/2 x 13” Length: 3" Head Diameter: 7/8" x 7/8" x 1/4") 12
NUTS & BOLTS
Langston pulley yokesB-129-B12 250994 Lower Pulley Yoke Plate .500" Thick, Brass 1
D-179-B12 413275 Upper Pulley Yoke Plate .500" Thick, Brass 2
LANGSTON
P-1886-CB Stitch Tab Knife Center Bevel, Green (1.625"W x .800"H x .062"D) 3
P-531-CB Stitch Tab Knife Center Bevel, Green (2.063"W x .800"H x .062"D) 4
P-1887-CB Stitch Tab Knife Center Bevel, Red (1.625"W x .875"H x .062"D) 5
P-532-CB Stitch Tab Knife Center Bevel, Red (2.062"W x .875"H x .062"D) 6
P-1888-CB Stitch Tab Knife Center Bevel, Black (1.625" x .975"H x .062"D) 7
P-533-CB Stitch Tab Knife Center Bevel, Black (2.062” x .975”H x .062”D) 8
Langston stitch tab knives
Langston steel-To-steel knivesSSLK-.620X2-HM 412668-2 Steel-To-Steel Stitch Tab Knife 2.000"W x .620"H x .125"D - , C Flute 9
SSLK-.575X2-HM 412668-1 Steel-To-Steel Stitch Tab Knife 3.000"W x .575"H x .125” D - B Flute 10
SSLK-.710X2-HM 412668-5 Steel-To-Steel Stitch Tab Knife 2.000”W x .710”H x .125” C/B Flute (Double Wall) 11
PART NUMBER OEM NUMBER PRODUCT NAME DESCRIPTION PHOTO
To Order:Call: 1.800.969.0881Order Online: www.corrugatedparts.comEmail: [email protected]
page 2
1 2 3 4
5 6 7 8
9 10 11 12
S&S
CR-507-PR 701-7025 Pull Roll 38" 1
CR-5001-PR ZLR-7041 Pull Roll 50" 2
S&S PULL ROLLS
s&S primary score heads
PART NUMBER OEM NUMBER PRODUCT NAME DESCRIPTION PHOTO
CR-35151-1 ZLR-1050 Male Primary Score Head 50" 3
CR-35435 ZLR-51046 Female Primary Score Head 50" - 16.445" OD (over urethane) 4
CR-35042 701-1121 Male (Harrison) Primary Score Head (701) 38" - 6.25"ID x 9.220" 5
CR-35315 701-51005 Female (Harrison) Primary Score Head (701) 38" 6
CR-35183-L2K Stitch Block Assembly Leading, 38", Soft Cut 7
CR-35183-T2K Stitch Block Assembly Trailing, 38", Soft Cut 8
CR-35184-L1K Stitch Block Assembly Leading, 50", Soft Cut 9
CR-35184-T1K Stitch Block Assembly Trailing, 50", Soft Cut 10
S&S STITCH BLOCK ASSEMBLIES
To Order:Call: 1.800.969.0881Order Online: www.corrugatedparts.comEmail: [email protected]
page 3
CR-602-TWS ZLR-1252 No Crush Sleeve (Wheel) 4.00" x 6.00"ID x 1.00"W 11
S&S No Crush Sleeves
1 2 3 4
5 6 7 8
9 10 11
S&S
To Order:Call: 1.800.969.0881Order Online: www.corrugatedparts.comEmail: [email protected]
page 4
S&S Jiffy shoes
S&S outer raceS (Roller raceS)
S&S traverse split nutS
PART NUMBER OEM NUMBER PRODUCT NAME DESCRIPTION PHOTO
CR-35108-M ZLR-5149 Jiffy Shoe - Short Micarta 1
CR-35019-M ZLG-7025 Jiffy Shoe - Long Micarta 2
CR-36398 ZLR-1342 Outer Race (Roller Race) 50" 3
CR-36376 701-2014 Outer Race (Roller Race) 38" 4
CR-35004-S ZLG-1122 Traverse Plate Nut 50" 5
Go to www.corrugatedparts.com
1 2 3 4
5
wARD
53740-B38 C-70895 Bottom Stripper with Guard 37.5" - .375” Brass 1
53415-B38 C-47380 Bottom Stripper with Guard 50" - .375” Brass 2
53710-B38 C-78732 Bottom Stripper with Guard 66" - .375” Brass 3
53420-B38 C-49729 Bottom Stripper with Guard 75" -.375” Brass 4
WARD STRIPPERS
ward pull rolls
PART NUMBER OEM NUMBER PRODUCT NAME DESCRIPTION PHOTO
CR-5923-PRK OEM Style Pull Roll 37.5" 5
CR-45896-1K Quick Release Pull Roll 66" 6
ward carbon buttonsCR-45046 87058 Carbon Button 37.5" 7
CR-45377 86853 Carbon Button 66" 8
To Order:Call: 1.800.969.0881Order Online: www.corrugatedparts.comEmail: [email protected]
page 5
machines that we carry parts forAckebono/MaramatsuAmtekBendazoliBGMBHSBobstBostitchCurioniEmba
FosberGeneral TaperGeorge martinGlobalGrantGreenwoodHamadaIsowaK & H
KoppersLangstonLatitudeMartinMcKinleyMHI / EvolMitsubishi PrimeS & S
SerencoSimonStaleyTCYTecasaUniversalWard
1 2 3 4
5 6 7 8
Don't see the part you need?We make thousands of other parts not featured in stock or we can customized any part to your specifications. Give us a call at 1.800.969.0881
CR-45026-K C-78697 Stitch Block Assembly Trailing - 37.5" 1
CR-45027-K C-78698 Stitch Block Assembly Leading - 37.5" 2
CR-45594-TK Stitch Block Assembly Trailing - 50" 3
CR-45594-LK Stitch Block Assembly Leading - 50" 4
CR-45785-TK Stitch Block Assembly Trailing - 66" 5
CR-45785-LK Stitch Block Assembly Leading - 66" 6
ward stitch block assemblies
WARD
CR-45486-90 120365 Urethane Score Cover Durometer 90 - Blue - 37.5" 7
CR-45486-80 148252 Urethane Score Cover Durometer 80 - Yellow - 37.5" 7
CR-45486-70 177052 Urethane Score Cover Durometer 70 - Black - 37.5" 7
CR-45508-90 121737 Urethane Score Cover Durometer 90 - Blue - 50" 7
CR-45508-80 267597 Urethane Score Cover Durometer 80 - Yellow - 50" 7
CR-45508-70 146408 Urethane Score Cover Durometer 70 - Black - 50" 7
CR-45845-90 121733 Urethane Score Cover Durometer 90 - Blue - 66" 7
CR-45845-80 154789 Urethane Score Cover Durometer 80 - Yellow - 66" 7
CR-45845-70 177053 Urethane Score Cover Durometer 70 - Black - 66" 7
ward urethane score covers
PART NUMBER OEM NUMBER PRODUCT NAME DESCRIPTION PHOTO
To Order:Call: 1.800.969.0881Order Online: www.corrugatedparts.comEmail: [email protected]
page 6
1 2 3 4
5 6 7
To Order:Call: 1.800.969.0881Order Online: www.corrugatedparts.comEmail: [email protected]
page 7
STANDARD SCORE PROFILES5/8 5/8 5/8
AF
AM BM
BF
CM
CF
DM
DF EF
EM
GOFFSET
URETHANE
1/16
5/32
1/16 1/161/16
1/8
3/323/32
5/32
5/8 5/8 5/8
1/16
1/2
1/16
3/8
3/32
7/16
5/8 5/8 5/8
3/323/32
17/64
.277
7/16
3/64
1/2
5/8 5/8
1/2
3/32
.332
.063.063
All of our corrugated knives are quality inspected and through hardened with our state of the art heat treat process. We can customize any knife you need to your specifications. Give us a call or email us with you needs.
We offer:
KNIVES
To Order:Call: 1.800.969.0881Order Online: www.corrugatedparts.comEmail: [email protected]
page 8
We offer 6 different serrations for our male slotter knives.
FEMALE SLOTTER KNIVESMALE SLOTTER KNIVESCUT-OFF KNIVESTRIM KNIVES
PINCH KNIVESSERRATED KNIVESTIPPED KNIVESrotary sheer knives
stitch tab knivesscoring ringsand more!
To Order:Call: 1.800.969.0881Order Online: www.corrugatedparts.comEmail: [email protected]
page 9
OTHER PARTS cri offers
Our gears are manufactured from alloy steel bar stock forprecision and stability. The consistency between the gear teeth is obtained with the latest technology CNC machining. We provide iron nitriding hardness which enables the gears to withstandsevere shock and provides extended life for each part. We also offer keyless ring feeder locking devices on our gears whicheliminates the need for keys.
GEARS
BEARINGSClean-Out HoldersGlue WheelsDrive FlangesDialsKICKER PARTSLIFT SCREWSMotor Slip Ring CoversStitch Blocks
Track RollersSlide Plate Finger MechanismsYoke GuidesRunning Register BlocksYokesDoctor Blades Anilox RollsCutting Die SuppliesKrytoxRotary Steam Joints
Core ChucksDie BoardsGear RacksGrinding WheelsAir Cylinder SpringsClutches PumpsAnd Much More
If we do not have your part, our full staff engineering department can customize any part for you.
Call US at 1.800.969.0881
