Date post: | 23-Mar-2016 |
Category: |
Documents |
Upload: | mads-hjorth |
View: | 214 times |
Download: | 2 times |
steel doors mcr ALPE
Arkońska Business Parkul. Arkońska 6 bud. A280-387 Gdańsk, Polandtel.: +48 58 732 63 00fax: +48 58 732 63 [email protected]
www.mercor.com.pl
Photos: Mateusz Grzanka and company archives
steel doors mcr ALPE
Arkońska Business Parkul. Arkońska 6 bud. A280-387 Gdańsk, Polandtel.: +48 58 732 63 00fax: +48 58 732 63 [email protected]
www.mercor.com.pl
Photos: Mateusz Grzanka and company archives
Our clients can choose from a range of standard and custom frame profiles to suit almost any situation.
The following illustrations show our single rebate, corner frame and wrap-around framing systems.
ste e l door s
Mercor doors are tested and approved to EN-1634, EN-1336 in accredited laboratories throughout Europe.
Established in 1988, Mercor SA has become one of the largest manufacturers of passive fire protection systems in Europe.
Our extensive product portfolio includes:
Fire doors, gates and partitionsSmoke and heat exhaust systemsRooflight systemsFire ventilation systemsFire protection systems for building structures
Mercor SA produce a comprehensive range of high quality steel & timber door systems to suit almost any application.All of our products are supported by a team of professionals, offering our clients technical solutions and assistance at each stage of their projects from concept to completion.
Standard steel door construction and hardware:
door leaves are 54mm or 63mm thick and manufactured from 0.8 mm thick galvanised steel, primer coated to RAL 7035
insulated mineral wool core material steel frame manufactured from 1.25mm thick galvanised steel. mortice sash lock with euro profile cylinder lever handle set 2 No. Steel hinges 1 No. steel reinforcement/ security bolt on hinge side intumescent gasket and rubber seals door closer
Accessories/ Options
stainless steel hinges panic bolt and push bars fire resistant vision panels fire resistant louvers available in a range of standard colours; RAL 5010, 9002,
9006, 9010, 9016 polyester powder coated finish available in RAL colours smoke resistant threshold - automatic drop seal
Door Ref:
MCR ALPE 54
MCR ALPE 63
Fire Rating
EI 30/ E60 (FD 60)
EI 60/ E90 (FD 90)
Sound Reduction
32 RwdB
32 RwdB
Thermal Rating
1,1 W/m²K-U Value
1,1 W/m²K-U Value
internal reinforcement plate for door closer
security reinforcement bolt
A
ark.3
A
ark.3
E
E
internal reinforcement plates for door closers
security reinforcement bolt
S + 60
S - 85S = Structural opening
500
200
995
200
1055
200
500
995
200
1055
S + 60
wall thickness 85 - 610 mm, typically 130 - 390 mm.
S - 95
S + 20
S = Structural opening
S - 165
S + 60S = Structural opening
S - 85
S + 60S = Structural opening
S - 75
S + 20S = Structural opening
S - 145
note :
S = Structural opening
Our clients can choose from a range of standard and custom frame profiles to suit almost any situation.
The following illustrations show our single rebate, corner frame and wrap-around framing systems.
ste e l door s
Mercor doors are tested and approved to EN-1634, EN-1336 in accredited laboratories throughout Europe.
Established in 1988, Mercor SA has become one of the largest manufacturers of passive fire protection systems in Europe.
Our extensive product portfolio includes:
Fire doors, gates and partitionsSmoke and heat exhaust systemsRooflight systemsFire ventilation systemsFire protection systems for building structures
Mercor SA produce a comprehensive range of high quality steel & timber door systems to suit almost any application.All of our products are supported by a team of professionals, offering our clients technical solutions and assistance at each stage of their projects from concept to completion.
Standard steel door construction and hardware:
door leaves are 54mm or 63mm thick and manufactured from 0.8 mm thick galvanised steel, primer coated to RAL 7035
insulated mineral wool core material steel frame manufactured from 1.25mm thick galvanised steel. mortice sash lock with euro profile cylinder lever handle set 2 No. Steel hinges 1 No. steel reinforcement/ security bolt on hinge side intumescent gasket and rubber seals door closer
Accessories/ Options
stainless steel hinges panic bolt and push bars fire resistant vision panels fire resistant louvers available in a range of standard colours; RAL 5010, 9002, 9006, 9010, 9016
polyester powder coated finish available in RAL colours smoke resistant threshold - automatic drop seal
Door Ref:
MCR ALPE 54
MCR ALPE 63
Fire Rating
EI 30/ E60 (FD 60)
EI 60/ E90 (FD 90)
Sound Reduction
32 RwdB
32 RwdB
Thermal Rating
1,1 W/m²K-U Value
1,1 W/m²K-U Value
internal reinforcement plate for door closer
security reinforcement bolt
A
ark.3
A
ark.3
E
E
internal reinforcement plates for door closers
security reinforcement bolt
S + 60
S - 85S = Structural opening
500
200
995
200
1055
200
500
995
200
1055
S + 60
wall thickness 85 - 610 mm, typically 130 - 390 mm.
S - 95
S + 20
S = Structural opening
S - 165
S + 60S = Structural opening
S - 85
S + 60S = Structural opening
S - 75
S + 20S = Structural opening
S - 145
note :
S = Structural opening
steel doors mcr ALPE
Arkońska Business Parkul. Arkońska 6 bud. A280-387 Gdańsk, Polandtel.: +48 58 732 63 00fax: +48 58 732 63 [email protected]
www.mercor.com.pl
Photos: Mateusz Grzanka and company archives
Our clients can choose from a range of standard and custom frame profiles to suit almost any situation.
The following illustrations show our single rebate, corner frame and wrap-around framing systems.
ste e l door s
Mercor doors are tested and approved to EN-1634, EN-1336 in accredited laboratories throughout Europe.
Established in 1988, Mercor SA has become one of the largest manufacturers of passive fire protection systems in Europe.
Our extensive product portfolio includes:
Fire doors, gates and partitionsSmoke and heat exhaust systemsRooflight systemsFire ventilation systemsFire protection systems for building structures
Mercor SA produce a comprehensive range of high quality steel & timber door systems to suit almost any application.All of our products are supported by a team of professionals, offering our clients technical solutions and assistance at each stage of their projects from concept to completion.
Standard steel door construction and hardware:
door leaves are 54mm or 63mm thick and manufactured from 0.8 mm thick galvanised steel, primer coated to RAL 7035
insulated mineral wool core material steel frame manufactured from 1.25mm thick galvanised steel. mortice sash lock with euro profile cylinder lever handle set 2 No. Steel hinges 1 No. steel reinforcement/ security bolt on hinge side intumescent gasket and rubber seals door closer
Accessories/ Options
stainless steel hinges panic bolt and push bars fire resistant vision panels fire resistant louvers available in a range of standard colours; RAL 5010, 9002, 9006, 9010, 9016
polyester powder coated finish available in RAL colours smoke resistant threshold - automatic drop seal
Door Ref:
MCR ALPE 54
MCR ALPE 63
Fire Rating
EI 30/ E60 (FD 60)
EI 60/ E90 (FD 90)
Sound Reduction
32 RwdB
32 RwdB
Thermal Rating
1,1 W/m²K-U Value
1,1 W/m²K-U Value
internal reinforcement plate for door closer
security reinforcement bolt
A
ark.3
A
ark.3
E
E
internal reinforcement plates for door closers
security reinforcement bolt
S + 60
S - 85S = Structural opening
500
200
995
200
1055
200
500
995
200
1055
S + 60
wall thickness 85 - 610 mm, typically 130 - 390 mm.
S - 95
S + 20
S = Structural opening
S - 165
S + 60S = Structural opening
S - 85
S + 60S = Structural opening
S - 75
S + 20S = Structural opening
S - 145
note :
S = Structural opening
steel doors mcr ALPE
Arkońska Business Parkul. Arkońska 6 bud. A280-387 Gdańsk, Polandtel.: +48 58 732 63 00fax: +48 58 732 63 [email protected]
www.mercor.com.pl
Photos: Mateusz Grzanka and company archives
steel doors mcr ALPE
Arkońska Business Parkul. Arkońska 6 bud. A280-387 Gdańsk, Polandtel.: +48 58 732 63 00fax: +48 58 732 63 [email protected]
www.mercor.com.pl
Photos: Mateusz Grzanka and company archives
steel doors mcr ALPE
Arkońska Business Parkul. Arkońska 6 bud. A280-387 Gdańsk, Polandtel.: +48 58 732 63 00fax: +48 58 732 63 [email protected]
www.mercor.com.pl
Photos: Mateusz Grzanka and company archives
steel doors mcr ALPE
Arkońska Business Parkul. Arkońska 6 bud. A280-387 Gdańsk, Polandtel.: +48 58 732 63 00fax: +48 58 732 63 [email protected]
www.mercor.com.pl
Photos: Mateusz Grzanka and company archives
steel doors mcr ALPE
Arkońska Business Parkul. Arkońska 6 bud. A280-387 Gdańsk, Polandtel.: +48 58 732 63 00fax: +48 58 732 63 [email protected]
www.mercor.com.pl
Photos: Mateusz Grzanka and company archives
Gelco Nordic ApSHylkedamvej 70 : DK-5591 Gelsted
Tel.: 45 63 46 54 08 : Fax: +45 6346 5404
w w w . g e l c o - n o r d i c . d k