25
Brass Architectural Collection Pendant 80, 2017
Brass Architectural Collection Pendant 80, 2017
Brass Architectural Collection Pendant 80, 2017Polished brass or polished nickel-plated brass Mouth blown opaline glassPendant rod length to order
Ø 8
0 (3
.15”
)
Ø 62 (2.44”)
40 (1.
58”)
Bulb specifications Bulb specif icat ions 120V / 240VG9, 25W frosted halogen bulb260lm / 3000K
Product specificationsInput voltage: 120V / 240VMaximum wat tage: 25WDimmable: yesP80 Rod weight: ~1.5kg
Pendant rod length to order with maximum rod length 2m.Please supply required drop length of f ix ture, measured from the cei l ing to bot tom f i t t ing at t ime of order.P lease al low 25mm tolerance of drop length.Avai lable with Ø 62mm or Ø 120mm ceil ing rose.
Cleaning InstructionsBefore cleaning, l ight ing f ix tures must be turned of f and unplugged from mains electr ic i ty. Whilst cleaning them please be ex tremely careful and use the white cot ton gloves provided in the product box.
Pol ished brass: As the i tem is unlacquered, i t natural ly oxidises (darkens). Upon touching the i tems without gloves, f inger pr ints are l ikely to occur and leave marks. Use a good quali ty brass cleaning l iquid and fol low the product instruct ions using the ex tra sof t dust cloth. Do not apply pressure on persistent marks. Remove them using repeated gent le motions and by reapplying the brass cleaning l iquid.
Pol ished nickel: Use a l ight ly damp sof t dust cloth and gent ly go over marks unt i l clean. Dry i t af terwards with a sof t dust cloth. Make sure the product is completely dry before switching the electr ic i ty on.
Opaline glass: Remove the opaline glass sphere from the product. Using a l ight ly damp cloth, clean only the outside of the sphere and dry i t with a dry sof t dust cloth. Only put the glass sphere back on the product once i t is ful ly dry.
Backplate
Mounting screws not included.5mm countersunk screw recommended.
5 (0.2”)
10 (0.39”)
Ø 10 (0.4”)
Ø 5
.2 (0.
19”)
48 (1.88”)
Ø 6
0 (2
.36”
)
Ø 1
11 (4.
37”)
Ø 30 (1.18”)
Ø 9
1 (3
.58”
)
45°
Brass Architectural Collection Pendant 150, 2017
Brass Architectural Collection Pendant 150, 2017Polished brass or polished nickel-plated brass Mouth blown opaline glassPendant rod length to order
Ø 1
50 (5.
91”)
Ø 62 (2.44”)
40 (1.
58”)
Bulb specifications Bulb specif icat ions 240VG9 40W frosted halogen bulb460 lm / 2800K
Bulb specif icat ions 120VG9 40W frosted halogen bulb350 lm / 2800K
Product specificationsInput voltage: 120V / 240VMaximum wat tage: 40WDimmable: yesP150 Rod weight: ~2.5kg
Pendant rod length to order with maximum rod length 2m.Please supply required drop length of f ix ture, measured from the cei l ing to bot tom f i t t ing at t ime of order.P lease al low 25mm tolerance of drop length.Avai lable with Ø 62mm or Ø 120mm ceil ing rose.
Cleaning InstructionsBefore cleaning, l ight ing f ix tures must be turned of f and unplugged from mains electr ic i ty. Whilst cleaning them please be ex tremely careful and use the white cot ton gloves provided in the product box.
Pol ished brass: As the i tem is unlacquered, i t natural ly oxidises (darkens). Upon touching the i tems without gloves, f inger pr ints are l ikely to occur and leave marks. Use a good quali ty brass cleaning l iquid and fol low the product instruct ions using the ex tra sof t dust cloth. Do not apply pressure on persistent marks. Remove them using repeated gent le motions and by reapplying the brass cleaning l iquid.
Pol ished nickel: Use a l ight ly damp sof t dust cloth and gent ly go over marks unt i l clean. Dry i t af terwards with a sof t dust cloth. Make sure the product is completely dry before switching the electr ic i ty on.
Opaline glass: Remove the opaline glass sphere from the product. Using a l ight ly damp cloth, clean only the outside of the sphere and dry i t with a dry sof t dust cloth. Only put the glass sphere back on the product once i t is ful ly dry.
Backplate
Mounting screws not included.5mm countersunk screw recommended.
5 (0.2”)
10 (0.39”)
Ø 10 (0.4”)
Ø 5
.2 (0.
19”)
48 (1.88”)
Ø 6
0 (2
.36”
)
Ø 1
11 (4.
37”)
Ø 30 (1.18”)
Ø 9
1 (3
.58”
)
45°
Brass Architectural Collection Pendant 250, 2017
Brass Architectural Collection Pendant 250, 2017Polished brass or polished nickel-plated brass Mouth blown opaline glassPendant rod length to order
Ø 2
50 (9.
84”)
Ø 120 (4.72”)
40 (1.
58”)
Bulb specifications Bulb specif icat ions 240VE14, 40W opal halogen bulb350lm / 2800K
Bulb specif icat ions 120VE12, 40W opal halogen bulb350lm / 2800K
Product specificationsInput voltage: 120V / 240VMaximum wat tage: 40WDimmable: yesP20 rod weight: ~3.5kg
Pendant rod length to order with maximum rod length 2m.Please supply required drop length of f ix ture, measured from the cei l ing to bot tom f i t t ing at t ime of order.P lease al low 25mm tolerance of drop length.Avai lable with Ø 62mm or Ø 120mm ceil ing rose.
Cleaning InstructionsBefore cleaning, l ight ing f ix tures must be turned of f and unplugged from mains electr ic i ty. Whilst cleaning them please be ex tremely careful and use the white cot ton gloves provided in the product box.
Pol ished brass: As the i tem is unlacquered, i t natural ly oxidises (darkens). Upon touching the i tems without gloves, f inger pr ints are l ikely to occur and leave marks. Use a good quali ty brass cleaning l iquid and fol low the product instruct ions using the ex tra sof t dust cloth. Do not apply pressure on persistent marks. Remove them using repeated gent le motions and by reapplying the brass cleaning l iquid.
Pol ished nickel: Use a l ight ly damp sof t dust cloth and gent ly go over marks unt i l clean. Dry i t af aterwards with a sof t dust cloth. Make sure the product is completely dry before switching the electr ic i ty on.
Opaline glass: Remove the opaline glass sphere from the product. Using a l ight ly damp cloth, clean only the outside of the sphere and dry i t with a dry sof t dust cloth. Only put the glass sphere back on the product once i t is ful ly dry.
Backplate
Mounting screws not included.5mm countersunk screw recommended.
5 (0.2”)
10 (0.39”)
Ø 10 (0.4”)
Ø 5
.2 (0.
19”)
48 (1.88”)
Ø 6
0 (2
.36”
)
Ø 1
11 (4.
37”)
Ø 30 (1.18”)
Ø 9
1 (3
.58”
)
45°
Brass Architectural Collection Pendant 350, 2017
Brass Architectural Collection Pendant 350, 2017Polished brass or polished nickel-plated brass Mouth blown opaline glassPendant rod length to order
40 (1.
58”)
Ø 120 (4.72”)
Ø 3
50 (13
.78”
)
Bulb specifications Bulb specif icat ions 240VE14, 40W opal halogen bulb350lm / 2800K
Bulb specif icat ions 120VE12, 40W opal halogen bulb350lm / 2800K
Product specificationsInput voltage: 120V / 240VMaximum wat tage: 40WDimmable: yesP20 rod weight: ~4.5kg
Pendant rod length to order with maximum rod length 2m.Please supply required drop length of f ix ture, measured from the cei l ing to bot tom f i t t ing at t ime of order.P lease al low 25mm tolerance of drop length.Avai lable with Ø 62mm or Ø 120mm ceil ing rose.
Cleaning InstructionsBefore cleaning, l ight ing f ix tures must be turned of f and unplugged from mains electr ic i ty. Whilst cleaning them please be ex tremely careful and use the white cot ton gloves provided in the product box.
Pol ished brass: As the i tem is unlacquered, i t natural ly oxidises (darkens). Upon touching the i tems without gloves, f inger pr ints are l ikely to occur and leave marks. Use a good quali ty brass cleaning l iquid and fol low the product instruct ions using the ex tra sof t dust cloth. Do not apply pressure on persistent marks. Remove them using repeated gent le motions and by reapplying the brass cleaning l iquid.
Pol ished nickel: Use a l ight ly damp sof t dust cloth and gent ly go over marks unt i l clean. Dry i t af aterwards with a sof t dust cloth. Make sure the product is completely dry before switching the electr ic i ty on.
Opaline glass: Remove the opaline glass sphere from the product. Using a l ight ly damp cloth, clean only the outside of the sphere and dry i t with a dry sof t dust cloth. Only put the glass sphere back on the product once i t is ful ly dry.
Backplate
Mounting screws not included.5mm countersunk screw recommended.
5 (0.2”)
10 (0.39”)
Ø 10 (0.4”)
Ø 5
.2 (0.
19”)
48 (1.88”)
Ø 6
0 (2
.36”
)
Ø 1
11 (4.
37”)
Ø 30 (1.18”)
Ø 9
1 (3
.58”
)
45°
Michael Anastassiades Ltd.50 Rochester Pl, London NW1 9JX, UKT +44 (0)20 7928 [email protected]© 2019 Michael Anastassiades Ltd. All rights reserved.
Michael Anastassiades’ design phi losophy is to preser ve the inherent qual i t ies of given mater ial. Al l of our products are handmade and come in natural f inishes, exposed to the elements without any protect ive lacquers. We look at oxidisat ion as par t of a process that adds to the pat ina of an object, increasing beauty with t ime. We try our best for al l goods to leave our premises in pr ist ine condit ion, but sometimes products may arr ive with minor oxidisat ion marks.
Whilst every ef for t is made to ensure accurate representat ion of product colours, f inishes and dimensions, Michael Anastassiades Ltd reser ves the r ight to al ter these detai ls without not ice, in compliance with i ts own product ion needs, technological changes or in response to the current market needs. Colour swatches are for reference only; Michael Anastassiades Ltd cannot guarantee exact colour match for any product f inishes.
Al l designs are protected under copyr ight law. Michael Anastassiades holds the exclusive manufactur ing and distr ibut ion r ights wor ldwide. Copying wil l be prosecuted.
