BRAZEWELL
www.brazewellengineers.in
Manufactures and exporters
Brazewell Aftermarket Intercooler & After cooler
is totally Interchangeable with OEM Coolers.
Coolers are manufactured by use of the CNC
Machines & specially developed special purpose
machines with CNC controller
Interference fit between tube & aluminium insert
is maintained for better performance & life of the
cooler.
Benefits Coolers with tubes of special corrosion
resistant stainless steel.
Star Profile increases heat transfer.
Very low approach temperature.
Nearly perfect inter cooling - saves energy.
Nearly perfect after cooling – enhance dryer
performance.
INTERCOOLER, AFTER COOLER, OIL COOLER for ZR COMPRESSOR
Product RangeCoolers for old ZR Compressor
Models :
ZR2, ZR3, ZR4, ZR5, ZR6.
Coolers for new ZR Compressor
Models:
ZR55, ZR75, ZR90, ZR110, ZR132, ZR145, ZR160,
ZR200, ZR250, ZR275, ZR300, ZR315, ZR355, ZR400,
ZR425, ZR450, ZR500, ZR630, ZR700, ZR750,ZR900.
*Presently we are not manufacturing brazed plate
oil coolers we only supply.
Coolers for ZH & ZHC Compressor
Models:
ZH 7000, ZH 10000, ZH 15000
ZR, ZH, ZHC Series
GA Series
CENTAC AIR COOLER
The Brazewell after market Intercooler,
After cooler cartridge & External type, Oil cooler for CENTAC
Air Compressor are directly interchangeable with OEM
Coolers.Our coolers takes care of low inter stage temperature
of the compressor to improve the efficiency & reliability of
plant air supply.
Coolers available for CENTAC Compressor Models.
Benefits: Directly interchangeable with OEM Coolers.
Tube holes are CNC drilled, reamed, grooved, burnished for
closed tolerances to maintain better accuracy & leak tightness.
Tubes are manufactured on CNC Machines & specially
developed special purpose machine to maintain reliability &
heat transfer efficiency.
Optimum heat transfer surfaces, greater efficiency, uniform
flow, constant water velocity.
Less pressure drop saves energy & higher water velocity
decreases fouling.
CNC turret punched baffles make better accuracy in punching
hence minimum bypass through baffles for better efficiency.
Stock of coolers reduces down time & lowers the inventory
costs.
CENTAC I
OC-12, OC-15
1C-20, 1C-21,1C-25,1C-30
2C-30,2C-35, 2C-40,2C-40,2C-
50,2C-55
3C-60, 3C-60M5,3C-70,3C-
75M5,3C-90
4C-110,4C-110M5,4C-125,4C-
125M5,4C-150,4C-150M5
CENTAC II
CVO, OCV, CV1, 1CV, CV1A, CV1B,
ACII, ACV, CV2, 2CV, 1CII, 2CC
CENTAC III
2CIII, 2ACII, 3CII, 3CII, 3ACII, 5CII
New Models
C250, C350, C700, C750, C950,
C1000, C1050
ELLIOT
220 DA 3
P 500-800
P 300-400
Brazewell After market Intercooler, After cooler, Oil
coolers are totally interchangeable with OEM Coolers.
Coolers are manufactured by use of CNC Machines,
specially developed CNC Orbital welding machines for
tube to tube plate joint, CNC Fin press for producing of
fins, hydraulic bullet machine for tube to fin
interference fit.
AdvantagesDirectly interchangeable with OEM coolers.
Machining done on CNC Machines for better accuracy
& life of coolers.
Optimum heat transfer surfaces greater efficiency,
uniform flow.
Less pressure drop saves energy & higher velocity
decreases fouling.
S. S. Baffles provided for better corrosion resistance.
Stock of coolers reduces down time lowers the
inventory cost.
Coolers with tubes of special corrosion resistant
stainless steel.
Tube to tube plate joint welded by CNC Orbital
welding machine for lifelong leak tightness.
Coolers developed for
Old Models:
150 – 330 DA2/DA3
360 – 550 DA2/DA3
610 – 1100 DA2/DA3
1100 – 2250 DA2/DA3
New Models:
P 300 – 400 Plus
P 400 – 600 Plus
P 500 – 800 Plus
P 700 – 2250 Plus
330 DA 3
150 DA 3
280 DA 3 Old
INTER COOLER
220 DA 3
220 DA 3
CAMERON
TA 85
TA 11000
TA 20000
Intercooler, After cooler for
Joy Cooper / Cameron Compressor.
Brazewell is OEM Manufacturers for
Cameron TA 2000 & TA 3000
Compressor.
Advantages:
Directly interchangeable with OEM
coolers.
Machining done on CNC Machines for
better accuracy & life of coolers.
Optimum heat transfer surfaces greater
efficiency, uniform flow.
Less pressure drop saves energy &
higher velocity decreases fouling.
S. S. Baffles provided for better
corrosion resistance.
Rear Header design for better cleaning
of tubes.
Stock of coolers reduces down time
lowers the inventory cost.
Coolers available for following models:
TA -18, TA-28, TA-38/48, TA-85, TA-110,
TA-160, TA-200
TA-2000, TA-2020, TA-2040, TA-3000,
TA-6000, TA-11000, TA-20000
NECS HEAT EXCHENGER
BCS HEAT EXCHENGER
CONDENSER P15
OPV CHILLER
LUB OIL COOLER
FRESH WATER COOLER
INDIAN NAVY
BILDGE AIR COOLER
TA 3000
OIL COOLERS
CHARGE AIR COOLERS
Oil Cooler for ELLIOT and ZHC Oil Cooler Gear Box
Oil Cooler 2CC
Oil Cooler CPT
BRAZEWELLBRAZEWELL ENGINEERS
Works : SR No. 480,
Near Railway Line,
Kasarwadi, Pune - 411034
(Maharashtra) India.
Telephone Office :
91 20 27122258 / 27123020 / 2712 5960
Fax No. : 91 20 2712 7014
Mobile : 8308869305
Visit us at : www.brazewellengineers.in
E-mail : [email protected]
..................................................................................................................................................................................................
..................................................................................................................................................................................................
geniusad-mission/2000/2014
Our Valuable Customers
Brazewell Engineers Established in 1990.
Our specialty is manufacture of specialized coolers required for Power Plants, Steel Plants, Textile Industries,
Petrochemicals, Refinery, Fertilizer, Chemical, Pharmaceutical, Paper, Tyre, Cement, Metal Industries Etc.