WWW.B
RIC
KIN
THEWALL.E
U
4
RECESSED LUMINAIRES
WALL LUMINAIRES
ORIENTATION LIGHTING
PROFILES
CUSTOM ARCHITECTURAL
08
84
146
176
200
INTRODUCTION | 03
1995 Brick In The Wall Founder Frank
Verschuere introduces the‘invisible integration of light’
concept. The !rst luminaire knowas the NORMALL is designed byBelgian architect Stephane Boens
2000The SLIM is added to
the product range
2010First participation at‘Light+Building’ and
release of catalogue 32010 DesignPlus award and
RedDot design award2008International Tradeshows in Las Vegas,
Stockhom and Dubai.Introduction of MOORand of catalogue Nr. 11997
The !rst distributoris appointed
2007UK - First
internationaltrade show
1996 The product range triples
with the introduction of theSMALL and BIG luminaires
2005Introduction of the !rstLED solutions. MOUSE,
PICA and BIBA are added
2006The !rst
installation kitis introduced
2009Incorporation of the new Brick InThe Wall NV. Introduction of the
new ‘Spring 2009’ collection(including FLUSH, ILLUSION,
WAVE, FRAME, IMPRESSION andEXPRESSION) and of the 2nd
catalogue
2012‘Light+Building’ 2012 and
release of catalogue number 42012 DesignPlus award and
RedDot design award
2011
04 | INTRODUCTION
INTRODUCTION | 05
CALCYT®
High density, High purity plaster
‘BRICK IN THE WALL®’ developed it’s own CALCYT® plaster with amazing characteristics. CALCYT® is a high density,
heat and !re resistant, next generation plaster, with optimal hardness and light re"exion properties. Our continuous
research results in the production of CALCYT® !ttings without air holes, assuring no cracks after installation. Our range
of light !xtures o#ers a truly trimless solution. The absence of a metal frame is not only aesthetically pleasing. Since
CALCYT® plaster !ttings share the same thermal expansion characteristics as regular plaster or plasterboard, it also
ensures stable, high quality installations that remain free of plaster cracks. You should come and look at some of the
installations that we did 17 years ago! Due to it’s thermal resistance, CALCYT® !ttings are suitable for many di#erent
light sources. The snow white CALCYT® !ttings can easily be painted in the colour of your wall or ceiling! But at the
same token, you could try a !nish with wall paper, gold leaf, or tadelakt. This facilitates the seamless integration of our
borderless CALCYT® !ttings into each and every interior. And if you decide to redecorate the place in a number of
years, our light !xtures will just adapt to your new desires.
CALCYT® is a registered trade mark of BRICK IN THE WALL®
INTRODUCTION | 07
TOUCH-IT 10
MASK 16
FLUSH 22
ILLUSION 30
PIXO 36
INDOX 46
CANOU 62
INSIDE 68
LEVEL 74
MIST 80
RECESSED LUMINAIRES
08 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 09
TOUCH-IT The Touch-It range is an example of the new-edge de-
sign from Brick In The Wall. Touch-It introduces gentle and smooth curves,
which make the light !xture radiate from the ceiling, adding new dynamics
to your architecture. With the fully paintable Touch-It, it becomes hard to
see where the ceiling ends and the light !xture begins, a typical feature of
the ‘invisible integration of light’ approach of Brick In The Wall. The deep-set
lamp source of the Touch-It range reduces glare, and is ideal for energy ef-
!cient LED retro!t lamps. A unique mounting system allows you to rotate
the lamp in all directions with a single, almost invisible ring. CALCYT® plaster
!ttings share the same thermal expansion characteristics as regular plaster
or plasterboard. This ensures installations that remain free of plaster cracks
for the long haul.
10 | RECESSED LUMINAIRES TOUCH-IT
TOUCH-IT 50 HAL TOUCH-IT 50 HAL IP44 TOUCH-IT 50 ES CONCRETE BOX TOUCH-IT 50
REF N° 234 10 050 REF N° 234 10 051 REF N° 234 11 050 REF N° 834 00 000
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 250!250 mm - F - o - K B - C - IP20 - 850°C - dimmable
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 250!250 mm - F - o - K B - IP44 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 250!250 mm - F - o - K B - C - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Touch-It 50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
���
������
��������
���
���
���
���
���
������
��������
���
���
���
���
���
������
���
���
���
���
��������
12 | RECESSED LUMINAIRES TOUCH-IT
TOUCH-IT 111 AR TOUCH-IT 111 CDM-R TOUCH-IT 111 CDM-TC CONCRETE BOX TOUCH-IT 111
REF N° 233 13 100 REF N° 233 12 070 REF N° 233 19 070 REF N° 833 00 000
k QR-LP 111 - 35-50-75-100WG53 - 12V - I - excl. transfoR 305!305 mm - E - m - K B - C - IP20 - 850°C - dimmable
i HIPAR 111 - 35W or 70WGX8.5 - 230V/50Hz - H - excl. EVGR 305!305 mm - F - o - K B - C - IP20 - 850°C - s
g HIT-TC - 35W or 70WG8.5 - 230V/50Hz - H - excl. EVGR 305!305 mm - F - o - K B - C - IP20 - 850°C - G - s
Housing: galvanized steelFor mounting of the Touch-It 111 into concrete ceilings
ELECTRONIC GEAR 35/70 W
35 W REF N° 699 99 03570 W REF N° 699 99 070
220-240V-50/60Hz - H - EVG - IP20 - B - For use in combination with CDM lamps 35W or 70W
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
���
���
���
���
���
���
���
����
����
���
���
���
�
���
���
���
���
� ���
����
���
���
���
�
���
���
���
���
� ���
����
14 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 15
TOUCH-IT
MASK The Mask range of wall washer light !xtures, lives up to
its name: a completely hidden light source provides optimal visual comfort.
The light source is centered at a 50- degree angle , while the unique mount-
ing system allows you to rotate the lamp in all directions with a single, almost
invisible ring. The Mask range comes with di"erent light sources, and is ideal
for energy e#cient LED retro!t lamps. CALCYT® plaster !ttings share the
same thermal expansion characteristics as regular plaster or plasterboard.
This ensures installations that remain free of plaster cracks for the long haul
Mask is an ideal companion for the Touch-It range, as both ranges use the
new-edge design approach from Brick In The Wall. The typical combination
of gentle and smooth curves radiates softly out of the architecture. The fully
paintable Mask !xture is really a sculpture that adds valuable mood lighting
to your room. Whether the light is on or o", Mask will always surprise you!
16 | RECESSED LUMINAIRES MASK
MASK 111 AR MASK 111 CDM-R MASK 111 CDM-TC CONCRETE BOX MASK 111
REF N° 240 13 100 REF N° 240 12 070 REF N° 240 19 070 REF N° 840 00 000
k QR-LP 111 - 35-50-75-100WG53 - 12V - I - excl. transfoR 274!429 mm - E - m - K B - C - IP20 - 850°C - dimmable
i HIPAR 111 - 35W or 70WGX8.5 - 230V/50Hz - H - excl. EVGR 274!429 mm - F - o - K B - C - IP20 - 850°C - s
g HIT-TC - 35W or 70WG8.5 - 230V/50Hz - H - excl. EVGR 274!429 mm - F - o - K B - C - IP20 - 850°C - G - s
Housing: galvanized steelFor mounting of the Mask 111 into concrete ceilings
ELECTRONIC GEAR 35/70 W
35 W REF N° 699 99 03570 W REF N° 699 99 070
220-240V-50/60Hz - H - EVG - IP20 - B - For use in combination with CDM lamps 35W or 70W
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
MASK 50 HAL MASK 50 ES CONCRETE BOX MASK 50
REF N° 241 10 050 REF N° 241 11 050 REF N° 841 00 000
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 184!269 mm - F - o - J B - C - IP20 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 184!269 mm - F - o - J B - C - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Mask 50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
���
���
������
���
���
���
��
���
���
���
���
���
��
���������
���
���
���
���
���
���
���
���
���
��
���������
���
���
���
���
���
������
���
���
���
���
���
���
���
���
���
���
������
���
���
���
���
���
���
18 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 19
MASK
20 | RECESSED LUMINAIRES MASK
FLUSH The Flush is an example of the soft edge design from
Brick In The Wall. The luminaire disappears smoothly and seamless into the
architecture and creates a non-disturbing light beam that improves visual
comfort. At the same time, the Flush adds a secondary halo light ring to
the !xture, creating a unique recessed downlight. The fully paintable Flush
range is available in 3 dimensions and can be equipped with a great variety
of lamps, including energy e"cient LED retro!t lamps. The light source can
be adjusted in the horizontal (350°) as well as in the vertical direction (30°).
CALCYT® plaster !ttings share the same thermal expansion characteristics as
regular plaster or plasterboard. This ensures installations that remain free of
plaster cracks for the long haul.
22 | RECESSED LUMINAIRES FLUSH
FLUSH 50 HAL FLUSH 50 ES CONCRETE BOX FLUSH 50
REF N° 210 10 050 REF N° 210 11 050 REF N° 810 00 000
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 194!194 mm - F - o - K B - C - IP20 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 194!194 mm - F - o - K B - C - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Flush 50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
24 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 25
FLUSH
FLUSH 111 AR FLUSH 111 CDM-R FLUSH 111 CDM-TC CONCRETE BOX FLUSH 111
REF N° 211 13 100 REF N° 211 12 070 REF N° 211 19 070 REF N° 811 00 000
k QR-LP 111 - 35-50-75-100WG53 - 12V - I - excl. transfoR 324!324 mm - E - m - K B - C - IP20 - 850°C - dimmable
i HIPAR 111 - 35W or 70WGX8.5 - 230V/50Hz - H - excl. EVGR 324!324 mm - F - o - K B - C - IP20 - 850°C - s
g HIT-TC - 35W or 70WG8.5 - 230V/50Hz - H - excl. EVGR 324!324 mm - F - o - K B - C - IP20 - 850°C - G - s
Housing: galvanized steelFor mounting of the Flush 111 into concrete ceilings
ELECTRONIC GEAR 35/70 W
35 W REF N° 699 99 03570 W REF N° 699 99 070
220-240V-50/60Hz - H - EVG - IP20 - B - For use in combination with CDM lamps 35W or 70W
Any colour: paintable plaster
Colour metal ring: mat white
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
26 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 27
FLUSH
CONCRETE BOX FLUSH 228
REF N° 812 00 000
Housing: galvanized steelFor mounting of the Flush 228 into concrete ceilings
Any colour: paintable plaster
Included: opaline cover
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
FLUSH 228 26-32W FLUSH 228 42W FLUSH 228 26-32W DIM 1-10V FLUSH 228 42W DIM 1-10V
REF N° 220 14 064 REF N° 220 14 084 REF N° 220 17 064 REF N° 220 17 084
X 2! TC-TEL 26-32WGX24q-3 - 230V/50Hz - H - incl. EVGR 389!389 mm - F - o - K B - IP40 - 850°C - A - s
X 2! TC-TEL 42WGX24q-4 - 230V/50Hz - H - incl. EVGR 389!389 mm - F - o - K B - IP40 - 850°C - A - s
X 2! TC-TEL 26-32W - GX24q-3 - 230V/50Hz - H - incl. EVGD - R
389!389 mm - F - o - K - B IP40 - 850°C - dimmable - A - s
X 2! TC-TEL 42W - GX24q-4 230V/50Hz - H - incl. EVGD - R
389!389 mm - F - o - K - B IP40 - 850°C - dimmable - A - s
28 | RECESSED LUMINAIRES FLUSH
ILLUSION The Illusion range of wall washer light !xtures is inspired
by nature. The design is based on a dune where the wind blows the sand
into natural asymmetric shapes. This typical asymmetric shape makes the
Illusion perfect as a wallwashing luminaire. Made of fully paintable CALCYT®
plaster, this module integrates easily into the ceiling. The light source can
be adjusted in a horizontal (350°) as well as in a vertical direction (30°). The
Illusion 50 and 111 o"er a full range of light sources, and are ideal for energy
e#cient LED retro!t lamps. CALCYT® plaster !ttings share the same thermal
expansion characteristics as regular plaster or plasterboard. This ensures in-
stallations that remain free of plaster cracks for the long haul.
30 | RECESSED LUMINAIRES ILLUSION
ILLUSION 50 HAL ILLUSION 50 ES CONCRETE BOX ILLUSION 50
REF N° 213 10 050 REF N° 213 11 050 REF N° 813 00 000
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 184!234 mm - F - o - J B - C - IP20 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 184!234 mm - F - o - J B - C - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Illusion 50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
32 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 33
ILLUSION
ILLUSION 111 AR ILLUSION 111 CDM-R ILLUSION 111 CDM-TC CONCRETE BOX ILLUSION 111
REF N° 214 10 100 REF N° 214 12 070 REF N° 214 19 070 REF N° 814 00 000
k QR-LP 111 - 35-50-75-100WG53 - 12V - I - excl. transfoR 324!384 mm - E - m - K B - C - IP20 - 850°C - dimmable
i HIPAR 111 - 35W or 70WGX8.5 - 230V/50Hz - H - excl. EVGR 324!384 mm - F - o - K B - C - IP20 - 850°C - s
g HIT-TC - 35W or 70WG8.5 - 230V/50Hz - H - excl. EVGR 324!384 mm - F - o - K B - C - IP20 - 850°C - s
Housing: galvanized steelFor mounting of the Illusion 111 into concrete ceilings
ELECTRONIC GEAR 35/70 W
35 W REF N° 699 99 03570 W REF N° 699 99 070
220-240V-50/60Hz - H - EVG - IP20 - B - For use in combination with CDM lamps 35W or 70W
Any colour: paintable plaster
Colour metal ring: mat white
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
34 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 35
ILLUSION
PIXO The timeless Pixo range stands for ultimate minimalistic
design. The fully paintable range of plaster !ttings o"ers enhanced visual
comfort due to a deep-set lamp source, and is ideal for energy e#cient LED
retro!t lamps. The truly trimless Pixo range blends perfectly with any interior.
Pixo 50 range is available in a !xed (non-adjustable) version, in a fully adjust-
able version, in an IP44 version, and in a wall washer version. On top of this
the Pixo 50 range exists in a double version (Pixo 2 x 50) for the ease of instal-
lation of twin lamps. All these versions of the Pixo 50 share the same visible
ceiling opening of 80mm, allowing you to easily combine the entire Pixo
50 range. This allows you to create a powerful, yet $exible universal design
language. For environments where installation depth is critical, the ‘low’ ver-
sion, or Pixo 50 L, o"ers a perfect solution. It allows you to combine the time-
less design of the Pixo range, and the comfort of a deep set lamp source,
with installation depths of less then 80 mm. Finally, the Pixo 111 range al-
lows you to combine the minimalistic design of the Pixo with various 111
lamp sources.
36 | RECESSED LUMINAIRES PIXO
PIXO 50 HAL IP44 PIXO 50 W HAL PIXO 50 W ES CONCRETE BOX PIXO 50
REF N° 227 10 051 REF N° 262 10 050 REF N° 262 11 050 REF N° 827 00 000
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 114!134 mm - F - o - K B - IP44 - 850°C - dimmable
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 114!134 mm - F - o - J B - IP20 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 114!134 mm - F - o - J B - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Pixo 50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete boxIP44 version wallwasher version wallwasher version
PIXO 50 HAL PIXO 50 ES PIXO 50 A HAL PIXO 50 A ES
REF N° 227 10 050 REF N° 227 11 050 REF N° 261 10 050 REF N° 261 11 050
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 114!134 mm - F - o - K B - IP20 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 114!134 mm - F - o - K B - IP20 - 850°C - dimmable
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 114!134 mm - F - o - K B - C - IP20 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 114!134 mm - F - o - K B - C - IP20 - 850°C - dimmable
"xed version "xed version adjustable version adjustable version
����
������
��������
���
���
���
����
������
��������
���
���
���
��
������
�����
� ��
��
���
���
��
������
�����
� ��
��
���
���
��
������
�����
� ��
��
���
���
���
��
������
�����
���
���
���
���
��
������
�����
���
���
���
38 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 39
PIXO
PIXO 2X50 A HAL PIXO 2X50 A ES PIXO 2X50 HAL IP44 CONCRETE BOX PIXO 2X50
REF N° 257 10 050 REF N° 257 11 050 REF N° 256 10 051 REF N° 856 00 000
N 2! QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 114!244 mm - F - o - K B - C - IP20 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 114!244 mm - F - o - K B - C - IP20 - 850°C - dimmable
N 2! QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 114!244 mm - F - o - K B - IP44 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Pixo 2X50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete boxadjustable version adjustable version IP44 version
��
������
���
�����
� �� ���
��
���
���
��
��
������
���
�����
���
���
��� ���
��
��
������
���
�����
���
���
��� ���
40 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 41
PIXO
PIXO 50 LOW HAL PIXO 50 LOW ES CONCRETE BOX PIXO 50
REF N° 263 10 050 REF N° 263 11 050 REF N° 827 00 000
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 114!134 mm - F - o - K B - IP20 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 114!134 mm - F - o - K B - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Pixo 50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box"xed version "xed version
��
���
���
��
���
���
���
���
��
���
���
��
���
���
���
���
42 | RECESSED LUMINAIRES PIXO
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
PIXO 111 AR PIXO 111 CDM-R PIXO 111 CDM-TC CONCRETE BOX PIXO 111
REF N° 228 13 100 REF N° 228 12 070 REF N° 228 19 070 REF N° 828 00 000
k QR-LP 111 - 35-50-75-100WG53 - 12V - I - excl. transfoR 187!204 mm - E - m - K B - C - IP20 - 850°C - dimmable
i HIPAR 111 - 35W or 70WGX8.5 - 230V/50Hz - H - excl. EVGR 187!204 mm - F - o - K B - C - IP20 - 850°C - s
g HIT-TC - 35W or 70WG8.5 - 230V/50Hz - H - excl. EVGR 187!204 mm - F - o - K B - C - IP20 - 850°C - s
Housing: galvanized steelFor mounting of the Pixo 111 into concrete ceilings
ELECTRONIC GEAR 35/70 W
35 W REF N° 699 99 03570 W REF N° 699 99 070
220-240V-50/60Hz - H - EVG - IP20 - B - For use in combination with CDM lamps 35W or 70W
������
���
���
��
���
���
���
����
���
���
��
����������
���
���
���
���
���
����������
���
��
���
���
44 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 45
PIXO
INDOX The Indox range of truly trimless downlights is a great
example of timeless, cutting edge design. The Indox is designed for a full
range of glare reducing, deep-set lamp units, and is ideal for energy e!cient
LED retro"t lamps. A unique mounting system allows you to rotate the lamp
in all directions with a single, almost invisible ring The fully paintable Indox
series creates an unobtrusive luminaire in perfect harmony with the archi-
tecture. The Indox range is ideal for a wide range of lighting applications:
residential buildings, shops, o!ces, meeting rooms, hotels, etc. The timeless
Indox range is a perfect match for contemporary and classical interiors. Un-
like other so-called trimless solutions, the Indox o#ers a truly trimless solu-
tion. The absence of a metal frame is not only aesthetically pleasing, it also
ensures stable, high quality installations that remain free of plaster cracks for
the long haul. After all, our CALCYT® plaster "ttings share the same thermal
expansion characteristics as regular plaster or plasterboard.
46 | RECESSED LUMINAIRES INDOX
INDOX 50 MINI HAL INDOX 50 MINI HAL IP44 INDOX 50 MINI ES CONCRETE BOX INDOX 50 MINI
REF N° 221 10 050 REF N° 221 10 051 REF N° 221 11 050 REF N° 843 00 000
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 114!144 mm - F - o - K B - C - IP20 - 850°C - dimmable
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 114!144 mm - F - o - K B - IP44 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 114!144 mm - F - o - K B - C - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Indox 50 mini into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
��
������
��
����
�����
���
���
��
������
��
����
�����
���
���
��
��
������
��
�����
��
���
���
48 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 49
INDOX
INDOX 50 HAL INDOX 50 HAL IP44 INDOX 50 ES CONCRETE BOX INDOX 50
REF N° 230 10 050 REF N° 230 10 051 REF N° 230 11 050 REF N° 830 00 000
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 144!168 mm - F - o - K B - C - IP20 - 850°C - dimmable
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 144!168 mm - F - o - K B - IP44 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 144!168 mm - F - o - K B - C - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Indox 50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
������
���
���
�����
��
��
���
���
������
���
���
�����
��
��
���
���
������
���
���
���
��
���
��
���
���
50 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 51
INDOX
INDOX 2X50 HAL INDOX 2X50 HAL IP44 INDOX 2X50 ES CONCRETE BOX INDOX 2X50
REF N° 229 10 050 REF N° 229 10 051 REF N° 229 11 050 REF N° 829 00 000
N 2! QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 144!283 mm - F - o - K B - C - IP20 - 850°C - dimmable
N 2! QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 144!283 mm - F - o - K B - IP44 - 850°C - dimmable
P 2! QPAR 16 - 50WGZ10 - 230V/50Hz - HR 144!283 mm - F - o - K B - C - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Indox 2X50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
���������
���
���
��
��
��
���
���
���������
���
���
��
��
��
���
���
���������
���
���
��
���
��
���
���
52 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 53
INDOX
INDOX 3X50 HAL INDOX 3X50 HAL IP44 INDOX 3X50 ES CONCRETE BOX INDOX 3X50
REF N° 223 10 050 REF N° 223 10 051 REF N° 223 11 050 REF N° 844 00 000
N 3! QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 168x359 mm - F - o - K B - C - IP20 - 850°C - dimmable
N 3! QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 168x359 mm - F - o - K B - IP44 - 850°C - dimmable
P 3! QPAR 16 - 50WGZ10 - 230V/50Hz - HR 168x359 mm - F - o - K B - C - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Indox 3X50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
��
������
���
���
��
���
��
���
���
��
������
���
���
��
���
��
���
���
������
���
���
�����
���
��
���
���
���
���
���
54 | RECESSED LUMINAIRES INDOX
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
INDOX 111 AR INDOX 111 CDM-R INDOX 111 CDM-TC CONCRETE BOX INDOX 111
REF N° 231 13 100 REF N° 231 12 070 REF N° 231 19 070 REF N° 831 00 000
k QR-LP 111 - 35-50-75-100WG53 - 12V - I - excl. transfoR 194!218 mm - E - m - K B - C - IP20 - 850°C - dimmable
i HIPAR 111 - 35W or 70WGX8.5 - 230V/50Hz - H - excl. EVGR 194!218 mm - F - o - K B - C - IP20 - 850°C - s
g HIT-TC - 35W or 70WG8.5 - 230V/50Hz - H - excl. EVGR 194!218 mm - F - o - K B - C - IP20 - 850°C - G - s
Housing: galvanized steelFor mounting of the Indox 111 into concrete ceilings
ELECTRONIC GEAR 35/70 W
35 W REF N° 699 99 03570 W REF N° 699 99 070
220-240V-50/60Hz - H - EVG - IP20 - B - For use in combination with CDM lamps 35W or 70W
���
���������
���
���
���
����
���
���
������
�
���������
���
���
���
���
���
����
���������
���
���
���
���
���
���
RECESSED LUMINAIRES | 57
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
INDOX 2X111 AR INDOX 2X111 CDM-R INDOX 2X111 CDM-TC CONCRETE BOX INDOX 2X111
REF N° 232 13 100 REF N° 232 12 070 REF N° 232 19 070 REF N° 832 00 000
k 2! QR-LP 111 - 35-50-75-100WG53 - 12V - I - excl. transfoR 194!408 mm - E - m - K B - C - IP20 - 850°C - dimmable
i 2! HIPAR 111 - 35W or 70WGX8.5 - 230V/50Hz - H - excl. EVGR 194!408 mm - F - o - K B - C - IP20 - 850°C - s
g 2! HIT-TC - 35W or 70WG8.5 - 230V/50Hz - H - excl. EVGR 194!408 mm - F - o - K B - C - IP20 - 850°C - G - s
Housing: galvanized steelFor mounting of the Indox 2X111 into concrete ceilings
ELECTRONIC GEAR 35/70 W
35 W REF N° 699 99 03570 W REF N° 699 99 070
220-240V-50/60Hz - H - EVG - IP20 - B - For use in combination with CDM lamps 35W or 70W
���
������
���
���
����
���
���
���
���
������
���
���
���
���
���
����
���
���
���
������
���
���
���
���
����
���
���
58 | RECESSED LUMINAIRES INDOX
INDOX TCL CONCRETE BOX INDOX TCL
REF N° 235 22 048 REF N° 835 00 000
T 2! TC-L 24W2G11 - 230V/50Hz - H - incl EVGR 191!474 mm - F - o - K B - IP40 - 850°C - A - s
Housing: galvanized steelFor mounting of the Indox TCL into concrete ceilings
Any colour: paintable plaster
Included: opaline cover
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
60 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 61
INDOX
CANOU The Canou range is a prime example of the soft-edge
design from Brick In The Wall. A key design feature is the smooth and gentle
curve that seems to fade into the architecture. The result is a unique light !x-
ture, that creates inspiration and movement, especially when one combines
multiple Canou and Canou XL !xtures. The fully paintable Canou combines
functionality and visual comfort with an aesthetically pleasing design that
complements any type of architecture. The truly trimless Canou range of
CALCYT® plaster !ttings share the same thermal expansion characteristics
as regular plaster or plasterboard. This ensures installations that remain free
of plaster cracks for the long haul.
+ 60% LIGHT OUTPUT
62 | RECESSED LUMINAIRES CANOU
CANOU CANOU DIM 1-10V CANOU DIM DALI TOUCH CONCRETE BOX CANOU
REF N° 237 15 039 REF N° 237 18 039 REF N° 237 30 039 REF N° 837 00 000
Z 1! T16 - 21/39WG5 - 230V/50Hz - H - incl EVGR 129!1074 mm - F - o - L B - IP20 - 850°C - A - s
Z 1! T16 - 21/39WG5 - 230V/50Hz - H - incl EVGDR 129!1074 mm - F - o - L B - IP20 - 850°C - dimmable - A - s
Z 1! T16 - 21/39WG5 - 230V/50Hz - H - incl EVGDR 129!1074 mm - F - o - L B - IP20 - 850°C - dimmable - A - s
Housing: galvanized steelFor mounting of the Canou into concrete ceilings
PRISMA COVER CANOU
REF N° 237 00 001
High performance prisma coverIncreases light output by +20%
Any colour: paintable plaster
Included: opaline cover
Optional: prisma cover
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
64 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 65
CANOU
CANOU XL CANOU XL DIM 1-10V CANOU XL DIM DALI TOUCH CONCRETE BOX CANOU XL
REF N° 242 15 054 REF N° 242 18 054 REF N° 242 30 054 REF N° 842 00 000
Z 1! T16 - 28/54WG5 - 230V/50Hz - H - incl EVGR 129!1374 mm - F - o - L B - IP20 - 850°C - A - s
Z 1! T16 - 28/54WG5 - 230V/50Hz - H - incl EVGDR 129!1374 mm - F - o - L B - IP20 - 850°C - dimmable - A - s
Z 1! T16 - 28/54WG5 - 230V/50Hz - H - incl EVGDR 129!1374 mm - F - o - L B - IP20 - 850°C - dimmable - A - s
Housing: galvanized steelFor mounting of the Canou XL into concrete ceilings
PRISMA COVER CANOU XL
REF N° 242 00 001
High performance prisma coverIncreases light output by +20%
Any colour: paintable plaster
Included: opaline cover
Optional: prisma cover
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
66 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 67
CANOU
INSIDE The aesthetically surprising Inside range of downlights
is a great addition to the new-edge design series from Brick In The Wall. As
the light !xture moves in and out of the ceiling, the inverted re"ections of
the Inside seem to create a mirage that will add a new feature to your inte-
rior. One thing is sure: the Inside looks great from the outside! With installa-
tion depths as low as 66 mm, the Inside range is also perfectly suited for en-
vironments where a reduced installation depth is required. Inside is available
with a full range of lamp sources. A unique mounting system allows you to
rotate the lamp in all directions with a single, almost invisible ring. The Inside
series is also perfectly suited for energy e#cient LED retro!t lamps. The fully
paintable Inside range of CALCYT® plaster !ttings shares the same thermal
expansion characteristics as regular plaster or plasterboard. This ensures in-
stallations that remain free of plaster cracks for the long haul.
68 | RECESSED LUMINAIRES INSIDE
INSIDE 50 HAL INSIDE 50 ES CONCRETE BOX INSIDE 50
REF N° 243 10 050 REF N° 243 11 050 REF N° 845 00 000
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 138x138 mm - F - o - K B - C - IP20 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 138x138 mm - F - o - K B - C - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Inside 50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
��
���
���
���
���
��
���
���
��
��
���
���
���
���
���
���
70 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 71
INSIDE
INSIDE 111 AR INSIDE 111 CDM-R INSIDE 111 CDM-TC CONCRETE BOX INSIDE 111
REF N° 244 13 100 REF N° 244 12 070 REF N° 244 19 070 REF N° 846 00 000
k QR-LP 111 - 35-50-75-100WG53 - 12V - I - excl. transfoR 218!218 mm - E - m - K B - C - IP20 - 850°C - dimmable
i HIPAR 111 - 35W or 70WGX8.5 - 230V/50Hz - H - excl. EVGR 218!218 mm - F - o - K B - C - IP20 - 850°C - s
g HIT-TC - 35W or 70WG8.5 - 230V/50Hz - H - excl. EVGR 218!218 mm - F - o - K B - C - IP20 - 850°C - G - s
Housing: galvanized steelFor mounting of the Inside 111 into concrete ceilings
ELECTRONIC GEAR 35/70 W
35 W REF N° 699 99 03570 W REF N° 699 99 070
220-240V-50/60Hz - H - EVG - IP20 - B - For use in combination with CDM lamps 35W or 70W
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
��
���
������
���
���
���
������
���
���
���
���
������
���
� �����
���
���
������
���
� �����
���
���
72 | RECESSED LUMINAIRES INSIDE
LEVEL The Level combines the minimalistic and soft edge de-
sign approaches from Brick In The Wall. The seamless light !xture seems to
"oat across the ceiling, only to disappears gently into the architecture. The
minimalistic design continues into the lamp unit, which is fully adjustable
with a single, almost invisible metal ring. The recessed lamp source o#ers
glare free visual comfort, and is ideally suited for energy e$cient LED retro!t
lamps. The fully paintable Level range is without any doubt a great addition
to your interior design, and demonstrates our approach to the art of the
‘invisible integration of light’. Finally, it is worth mentioning that all CALCYT®
plaster !ttings share the same thermal expansion characteristics as regular
plaster or plasterboard. This ensures installations of the Level series will re-
main free of plaster cracks for the long haul.
74 | RECESSED LUMINAIRES LEVEL
LEVEL 50 HAL LEVEL 50 HAL IP44 LEVEL 50 ES CONCRETE BOX LEVEL 50
REF N° 245 10 050 REF N° 245 10 051 REF N° 245 11 050 REF N° 847 00 000
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 194x194 mm - F - o - K B - C - IP20 - 850°C - dimmable
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 194x194 mm - F - o - K B - IP44 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 194x194 mm - F - o - K B - C - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Level 50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
��
���
���
���
���
����
���
���
��
���
���
���
���
����
���
���
��
���
���
���
���
���
���
����
76 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 77
LEVEL
LEVEL 111 AR LEVEL 111 CDM-R LEVEL 111 CDM-TC CONCRETE BOX LEVEL 111
REF N° 246 13 100 REF N° 246 12 070 REF N° 246 19 070 REF N° 848 00 000
k QR-LP 111 - 35-50-75-100WG53 - 12V - I - excl. transfoR 324x324 mm - E - m - K B - C - IP20 - 850°C - dimmable
i HIPAR 111 - 35W or 70WGX8.5 - 230V/50Hz - H - excl. EVGR 324x324 mm - F - o - K B - C - IP20 - 850°C - s
g HIT-TC - 35W or 70WG8.5 - 230V/50Hz - H - excl. EVGR 324x324 mm - F - o - K B - C - IP20 - 850°C - G - s
Housing: galvanized steelFor mounting of the Level 111 into concrete ceilings
ELECTRONIC GEAR 35/70 W
35 W REF N° 699 99 03570 W REF N° 699 99 070
220-240V-50/60Hz - H - EVG - IP20 - B - For use in combination with CDM lamps 35W or 70W
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
���
���
���
���
���
������
����
���
���
���
���
���
����
���
���
���
���
���
���
���
����
���
���
78 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 79
LEVEL
MIST The Mist range of wall washer light !xtures, o"ers a
unique appearance. The truly trimless integration capabilities of the Mist
!xture combine with the minimalistic, hidden light source to create light
out of nowhere, as a light beacon that suddenly appears out of the fog. The
Mist range comes with di"erent light sources, and is perfectly !t for energy
e#cient LED retro!t lamps. While the light source is centered at a 45- de-
gree angle, the unique mounting system allows you to rotate the lamp in all
directions with a single, almost invisible ring. The Mist !xtures are made of
CALCYT® plaster. This means the !ttings share the same thermal expansion
characteristics as regular plaster or plasterboard, which ensures installations
that remain free of plaster cracks for the long haul. And of course it also
means the Mist range is fully paintable.
80 | RECESSED LUMINAIRES MIST
MIST 111 AR MIST 111 CDM-R MIST 111 CDM-TC CONCRETE BOX MIST 111
REF N° 248 13 100 REF N° 248 12 070 REF N° 248 19 070 REF N° 850 00 000
k QR-LP 111 - 35-50-75-100WG53 - 12V - I - excl. transfoR 254x384 mm - E - m - K B - C - IP20 - 850°C - dimmable
i HIPAR 111 - 35W or 70WGX8.5 - 230V/50Hz - H - excl. EVGR 254x384 mm - F - o - K B - C - IP20 - 850°C - s
g HIT-TC - 35W or 70WG8.5 - 230V/50Hz - H - excl. EVGR 254x384 mm - F - o - K B - C - IP20 - 850°C - G - s
Housing: galvanized steelFor mounting of the Mist 111 into concrete ceilings
ELECTRONIC GEAR 35/70 W
35 W REF N° 699 99 03570 W REF N° 699 99 070
220-240V-50/60Hz - H - EVG - IP20 - B - For use in combination with CDM lamps 35W or 70W
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
MIST 50 HAL MIST 50 ES CONCRETE BOX MIST 50
REF N° 247 10 050 REF N° 247 11 050 REF N° 849 00 000
N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfoR 184x234 mm - F - o - K B - C - IP20 - 850°C - dimmable
P QPAR 16 - 50WGZ10 - 230V/50Hz - HR 184x234 mm - F - o - K B - C - IP20 - 850°C - dimmable
Housing: galvanized steelFor mounting of the Mist 50 into concrete ceilings
Any colour: paintable plaster
Colour metal ring: mat white (other colours on request)
Included: installation system for gypsum ceiling 9 - 12 - 15 mm
Optional: concrete box
���
������
���
���
���
���
���
���
������
���
���
���
���
���
���
������
���
���
���
���
���
���
���
���
���
������
���
���
���
���
���
���
���
������
���
���
���
82 | RECESSED LUMINAIRES
RECESSED LUMINAIRES | 83
MIST
WALL LUMINAIRES
ATMOS 86
IMPRESSION EXPRESSION 90
ITALIC 98
WAVE 102
MOVE IN MOVE OUT 106
SLIM 112
SMALL 116
NORMALL 120
BIG 124
XT 128
MOOR 132
FRAME 142
84 | WALL LUMINAIRES
WALL LUMINAIRES | 85
ATMOS The acclaimed Atmos light !xture is probably one of the
best examples of how Brick In The Wall achieves the ‘invisible integration
of light’. When the lights are out, the fully paintable Atmos seems to vanish
into your wall. Switch it on, and the light mysteriously appears through an
incision in the architecture. The award winning Atmos is a little bit of magic,
that that is sure to intrigue your guests. The state of the art, energy e"cient
LED unit, allows you to create a unique indirect lighting solution, The
unique esthetics and design of the Atmos series of wall lights, has drawn
international recognition from designers and architects alike. Atmos has
received the ‘reddot design award 2010’ the ‘design Plus award 2010’, and
the ‘iF product design award 2011’
86 | WALL LUMINAIRES ATMOS
ATMOS LED ATMOS LED DIM 1-10V POWER SUPPLY 24 VDC
REF N° 145 20 000 warm white 2700°KREF N° 145 20 100 warm white 3000°KREF N° 145 20 200 neutral white 4000°KREF N° 145 20 300 royal blue
REF N° 145 60 000 warm white 2700°KREF N° 145 60 100 warm white 3000°KREF N° 145 60 200 neutral white 4000°KREF N° 145 60 300 royal blue
REF N° 697 00 005 ! 10W230V/50Hz - u - F - B - IP20REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20
DIN rail power supply on request
24VDC - I - 10W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 10W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s - dim
PLASTERKIT ATMOS
REF N° 745 01 000
Requires external 24 VDC power supply Requires external 24 VDC power supply For mounting into gypsum wallsR 505x505 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
40
88 | WALL LUMINAIRES ATMOS
IMPRESSIONEXPRESSION
Transform your interior with a combination of Impression
and Expression wall light !xtures, and your home, lobby, entrance, or of-
!ce will never be the same. Or apply an Impression/Expression combination
to a rather narrow corridor, and you will see that your space looks wider
and brighter. Impression and Expression is a work of art that provides the
architect with unlimited freedom to create custom combinations of indi-
rect lighting. The Expression is available in a ‘Mono’ version, used as an up
or down light, or in a ‘Duo’ version (both up and down light), while the
Impression can be used with the lamp at the top, at the bottom, or side-
ways. The truly trimless range of CALCYT® plaster !ttings share the same
thermal expansion characteristics as regular plaster or plasterboard. This
ensures installations that remain free of plaster cracks for the long haul.
90 | WALL LUMINAIRES IMPRESSION EXPRESSION
IMPRESSION IMPRESSION DIM 1-10V IMPRESSION DIM DALI TOUCH PLASTERKIT IMPRESSION
REF N° 317 15 021 REF N° 317 18 021 REF N° 317 30 021 REF N° 717 01 000
Z 1í T16 - 21/39WG5 - 230V/50Hz - H - incl. EVGF - o - L - B - IP20 - 850°C A - s
Z 1í T16 - 21/39WG5 - 230V/50Hz - H - incl. EVGDF - o - L - B - IP20 - 850°C dimmable - A - s
Z 1í T16 - 21/39WG5 - 230V/50Hz - H - incl. EVGDF - o - L - B - IP20 - 850°C dimmable - A - s
For mounting into gypsum wallsR 186x1295 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
92 | WALL LUMINAIRES
WALL LUMINAIRES | 93
IMPRESSION EXPRESSION
EXPRESSION MONO EXPRESSION MONO DIM 1-10V EXPRESSION MONO DIM DALI TOUCH
PLASTERKIT EXPRESSION
REF N° 318 15 021 REF N° 318 18 021 REF N° 318 30 021 REF N° 718 01 000
Z 1í T16 - 21/39WG5 - 230V/50Hz - H - incl. EVGF - o - L - B - IP20 - 850°C A - s
Z 1í T16 - 21/39WG5 - 230V/50Hz - H - incl. EVGDF - o - L - B - IP20 - 850°C dimmable - A - s
Z 1í T16 - 21/39WG5 - 230V/50Hz - H - incl. EVGDF - o - L - B - IP20 - 850°C dimmable - A - s
Housing: perforated aluminiumFor mounting into gypsum wallsR 115x1295 mm
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
94 | WALL LUMINAIRES
WALL LUMINAIRES | 95
IMPRESSION EXPRESSION
EXPRESSION DUO EXPRESSION DUO DIM 1-10V EXPRESSION DUO DIM DALI TOUCH
PLASTERKIT EXPRESSION
REF N° 319 15 021 REF N° 319 18 021 REF N° 319 30 021 REF N° 718 01 000
Z 1í T16 - 21/39WG5 - 230V/50Hz - H - incl. EVGF - o - L - B - IP20 - 850°C A - s
Z 1í T16 - 21/39WG5 - 230V/50Hz - H - incl. EVGDF - o - L - B - IP20 - 850°C dimmable - A - s
Z 1í T16 - 21/39WG5 - 230V/50Hz - H - incl. EVGDF - o - L - B - IP20 - 850°C dimmable - A - s
For mounting into gypsum wallsR 115x1295 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
96 | WALL LUMINAIRES
WALL LUMINAIRES | 97
IMPRESSION EXPRESSION
ITALIC Italic combines complex, !uid geometries into a typical
Brick In The Wall new edge design. The result is a unique, contemporary wall
light "xture that o#ers endless combination possibilities for state of the art
indirect lighting solutions. Italic can be used with the lamp at the top, at the
bottom, or sideways The unusual sculptural shape of the sleekly curving
Italic creates a new presence in the interior design. Made of CALCYT® plas-
ter, the fully paintable Italic shares the same thermal expansion characteris-
tics as regular plaster or plasterboard, which ensures stable installations free
of plaster cracks. The truly trimless Italic is testing the boundaries of archi-
tectural light "xture design. The e#ortless sensuality and sculptural quality
translates into a forceful, organic, and utterly di#erent result: not straightfor-
ward, but Italic. Italic has received the ‘reddot design award 2012’.
98 | WALL LUMINAIRES ITALIC
ITALIC ITALIC DIM 1-10V ITALIC DIM DALI TOUCH PLASTERKIT ITALIC
REF N° 315 15 021 REF N° 315 18 021 REF N° 315 30 021 REF N° 726 01 000
Z 1í T16 - 21/39WG5 - 230V/50Hz - H - incl. EVGF - o - L - B - IP20 - 850°C A - s
Z 1í T16 - 21/39WG5 - 230V/50Hz - H - incl. EVGDF - o - L - B - IP20 - 850°C dimmable - A - s
Z 1í T16 - 21/39WG5 - 230V/50Hz - H - incl. EVGDF - o - L - B - IP20 - 850°C dimmable - A - s
For mounting into gypsum wallsR 190x1154 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
����
���
��
��
����
��
���
100 | WALL LUMINAIRES
WALL LUMINAIRES | 101
ITALIC
WAVE Just like a single wave will dissolve in the endless ocean,
the Wave wall light !xture will blend e"ortlessly with both traditional and
contemporary interior designs. O"ering comfortable indirect lighting, the
luminaire is ideally used to illuminate circulation zones. In order to ensure
installations that remain free of plaster cracks, the truly trimless and fully
paintable !xture is made of CALCYT® plaster that shares the same thermal
expansion characteristics as regular plaster or plasterboard. Wave does
never dominate your interior architecture, but takes a backseat approach,
that allows you to combine the wall light with architectural chandeliers and
other prominent design elements.
102 | WALL LUMINAIRES WAVE
WAVE WAVE DIM 1-10V WAVE DIM DALI TOUCH PLASTERKIT WAVE
REF N° 316 15 024 REF N° 316 18 024 REF N° 316 30 024 REF N° 716 01 000
Z 1í T16 - 14/24WG5 - 230V/50Hz - H - incl. EVGF - o - L - B - IP20 - 850°C A - s
Z 1í T16 - 14/24WG5 - 230V/50Hz - H - incl. EVGDF - o - L - B - IP20 - 850°C dimmable - A - s
Z 1í T16 - 14/24WG5 - 230V/50Hz - H - incl. EVGDF - o - L - B - IP20 - 850°C dimmable - A - s
Housing: perforated aluminiumFor mounting into gypsum wallsR 290x698 mm
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
104 | WALL LUMINAIRES
WALL LUMINAIRES | 105
WAVE
MOVE INMOVE OUT
Move In and Move Out complement each other like salt
and pepper. Thanks to its innovative design, the family of wall light !xtures
disappears smoothly and seamless into the architecture and creates a non-
disturbing, indirect light. The rounded, soft edge design of the Move In al-
lows for "at integration into the wall, and is especially !t for integration in
more traditional and classic interiors. The new edge design of the Move Out
adds an additional shadow line that moves slightly out from the wall, adding
a gentle, new touch to the design. Move In and Move Out are made of fully
paintable CALCYT® plaster. They share the same thermal expansion charac-
teristics as regular plaster or plasterboard and ensure installations that re-
main free of plaster cracks. The Move range is available with state of the art
LED units, allowing you to create energy e#cient, indirect lighting solutions.
106 | WALL LUMINAIRES MOVE IN MOVE OUT
MOVE IN HAL MOVE IN LED MOVE IN LED DIM 1-10V POWER SUPPLY 24 VDC
REF N° 122 01 040 REF N° 122 20 000 warm white 2700°K - IP20REF N° 122 20 100 warm white 3000°K - IP20REF N° 122 20 200 neutral white 4000°K - IP20REF N° 122 20 001 warm white 2700°K - IP54REF N° 122 20 101 warm white 3000°K - IP54REF N° 122 20 201 neutral white 4000°K - IP54
REF N° 122 60 000 warm white 2700°K - IP20REF N° 122 60 100 warm white 3000°K - IP20REF N° 122 60 200 neutral white 4000°K - IP20REF N° 122 60 001 warm white 2700°K - IP54REF N° 122 60 101 warm white 3000°K - IP54REF N° 122 60 201 neutral white 4000°K - IP54
REF N° 697 00 005 ! 10W230V/50Hz - u - F - B - IP20REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20
DIN Rail power supply on request
e QT14 - max 40W - G9 230V/50Hz H - F - o - L - B IP20 - 850°C dimmable - A
24VDC - I - 10W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 10W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s - dim
PLASTERKIT MOVE IN
REF N° 722 01 000
Requires external 24 VDC power supply Requires external 24 VDC power supply For mounting into gypsum wallsR 265x440 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
108 | WALL LUMINAIRES
WALL LUMINAIRES | 109
MOVE IN MOVE OUT
MOVE OUT HAL MOVE OUT LED MOVE OUT LED DIM 1-10V POWER SUPPLY 24 VDC
REF N° 121 01 040 REF N° 121 20 000 warm white 2700°K - IP20REF N° 121 20 100 warm white 3000°K - IP20 REF N° 121 20 200 neutral white 4000°K - IP20REF N° 121 20 001 warm white 2700°K - IP54REF N° 121 20 101 warm white 3000°K - IP54REF N° 121 20 201 neutral white 4000°K - IP54
REF N° 121 60 000 warm white 2700°K - IP20REF N° 121 60 100 warm white 3000°K - IP20REF N° 121 60 200 neutral white 4000°K - IP20REF N° 121 60 001 warm white 2700°K - IP54REF N° 121 60 101 warm white 3000°K - IP54REF N° 121 60 201 neutral white 4000°K - IP54
REF N° 697 00 005 - 10W230V/50Hz - u - F - B - IP20REF N° 697 00 025 - 25W230V/50Hz - u - F - B - IP20
DIN Rail power supply on request
e QT14 - max 40W - G9 230V/50Hz - H - F - o - L - B IP20 - 850°C - dimmable - A
24VDC - I - 10W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 10W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s - dim
PLASTERKIT MOVE OUT
REF N° 721 01 000
Requires external 24 VDC power supply Requires external 24 VDC power supply For mounting into gypsum wallsR 295x445 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
110 | WALL LUMINAIRES
WALL LUMINAIRES | 111
MOVE IN MOVE OUT
SLIM The Slim range is the longer, slimmer variant of the
‘original’ Normall. The Slim combines timeless design with state of the art,
energy e!cient LED units. The pure and simple lines result in a sleek, elegant
and minimalistic design. The curved back is optimized to create a great
indirect lighting solution. Our suggestion is to use Slim by the pair, as an
uplight or downlight. The range is fully paintable, which ensures Slim will
blend perfectly with your interior. And if you decide to redecorate the place
in a number of years, the wall "xture will just adapt to your new desires. The
Slim range of CALCYT® plaster "ttings o#ers a truly trimless solution and
ensures stable, high quality installations that remain free of plaster cracks.
112 | WALL LUMINAIRES SLIM
SLIM HAL SLIM LED SLIM LED DIM 1-10V POWER SUPPLY 24 VDC
REF N° 107 01 040 REF N° 107 20 000 warm white 2700°K - IP20REF N° 107 20 100 warm white 3000°K - IP20REF N° 107 20 200 neutral white 4000°K - IP20REF N° 107 20 001 warm white 2700°K - IP54REF N° 107 20 101 warm white 3000°K - IP54REF N° 107 20 201 neutral white 4000°K - IP54
REF N° 107 60 000 warm white 2700°K - IP20REF N° 107 60 100 warm white 3000°K - IP20REF N° 107 60 200 neutral white 4000°K - IP20REF N° 107 60 001 warm white 2700°K - IP54REF N° 107 60 101 warm white 3000°K - IP54REF N° 107 60 201 neutral white 4000°K - IP54
REF N° 697 00 005 ! 10W230V/50Hz - u - F - B - IP20REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20
DIN Rail power supply on request
e QT14 - max 40W - G9 230V/50Hz - H - F - o - L - B IP20 - 850°C - dimmable
24VDC - I - 4W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 4W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s - dim
PLASTERKIT SLIM
REF N° 707 01 000
Requires external 24 VDC power supply Requires external 24 VDC power supply For mounting into gypsum wallsR 95x550 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
114 | WALL LUMINAIRES
WALL LUMINAIRES | 115
SLIM
SMALL The Small range is the little brother of the ‘original’
Normall range of wall !xtures that was created over 17 years ago. Pure
and simple lines are combined with state of the art, energy e"cient LED
units to create a timeless and minimalist design. Use Small as an uplight or
downlight: the curved back is optimized to create a great indirect lighting
experience. Or use them by the pair, to create a di#erent approach. Small
will blend perfectly with your interior. As all CALCYT® plaster !ttings, the
Small is fully paintable. And because CALCYT® plaster !ttings share the
same thermal expansion characteristics as regular plaster or plasterboard,
the installations will remain free of plaster cracks.
116 | WALL LUMINAIRES SMALL
SMALL HAL SMALL LED SMALL LED DIM 1-10V POWER SUPPLY 24 VDC
REF N° 106 01 040 REF N° 106 20 000 warm white 2700°K - IP20REF N° 106 20 100 warm white 3000°K - IP20REF N° 106 20 200 neutral white 4000°K - IP20REF N° 106 20 001 warm white 2700°K - IP54REF N° 106 20 101 warm white 3000°K - IP54REF N° 106 20 201 neutral white 4000°K - IP54
REF N° 106 60 000 warm white 2700°K - IP20REF N° 106 60 100 warm white 3000°K - IP20REF N° 106 60 200 neutral white 4000°K - IP20REF N° 106 60 001 warm white 2700°K - IP54REF N° 106 60 101 warm white 3000°K - IP54REF N° 106 60 201 neutral white 4000°K - IP54
REF N° 697 00 005 ! 10W230V/50Hz - u - F - B - IP20REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20
DIN Rail power supply on request
e QT14 - max 40W - G9 230V/50Hz - H - F - o - L - B IP20 - 850°C - dimmable
24VDC - I - 6W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 6W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s - dim
PLASTERKIT SMALL
REF N° 706 01 000
Requires external 24 VDC power supply Requires external 24 VDC power supply For mounting into gypsum wallsR 124x365 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
118 | WALL LUMINAIRES
WALL LUMINAIRES | 119
SMALL
NORMALL The ‘original’ : the Normall was the !rst luminaire created by
Brick In The Wall more then 17 years ago! The design proves to be timeless: after
all those years the Normall is still a favourite of many an architect and designer.
State of the art LED units have been added to the range, allowing you to
combine design and energy e"ciency. The minimalist design is characterized
by pure and simple lines, while the curved back is optimized to create a great
indirect lighting solution. The unobstructive design of the Normall range makes
them perfect for integration in a range of interiors. The wall light !xtures are fully
paintable. But at the same token, you could try a !nish with wall paper, gold
leaf, or tadelakt: whatever !nish you choose, you are sure that the Normall will
blend perfectly with your interior. And if you decide to redecorate the place in
a number of years, the Normall will just adapt to your new desires. The Normall
range o#ers a truly trimless solution. The absence of a metal frame is not only
aesthetically pleasing. Since CALCYT® plaster !ttings share the same thermal
expansion characteristics as regular plaster or plasterboard, it also ensures
stable, high quality installations that remain free of plaster cracks. You should
come and look at some of the installations that we did 17 years ago!
120 | WALL LUMINAIRES
WALL LUMINAIRES | 121
NORMALL
NORMALL HAL NORMALL FLUO NORMALL LED NORMALL LED DIM 1-10V
REF N° 105 01 060 REF N° 105 01 026 REF N° 105 20 000 warm white 2700°K - IP20REF N° 105 20 100 warm white 3000°K - IP20REF N° 105 20 200 neutral white 4000°K - IP20REF N° 105 20 001 warm white 2700°K - IP54REF N° 105 20 101 warm white 3000°K - IP54REF N° 105 20 201 neutral white 4000°K - IP54
REF N° 105 60 000 warm white 2700°K - IP20REF N° 105 60 100 warm white 3000°K - IP20REF N° 105 60 200 neutral white 4000°K - IP20REF N° 105 60 001 warm white 2700°K - IP54REF N° 105 60 101 warm white 3000°K - IP54REF N° 105 60 201 neutral white 4000°K - IP54
c QT-DE - max 60W - R7s (74.5mm) 230V/50Hz - H -F o - L - B - IP20 850°C - dimmable - A
V TC-DEL 26W - G24q-3 - 230V/50Hz H - incl. EVG - F o - L - B - IP20 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s - dim
Requires 24 VDC power supply Requires 24 VDC power supply
POWER SUPPLY 24 VDC
REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20DIN Rail power supply on request
INTEGRATED POWER SUPPLY
REF N° 697 02 020 ! 20W24VDC - 230V/50Hz - u - F - B - IP20Integrated power supply for Normall
PLASTERKIT NORMALL
REF N° 705 01 000
For mounting into gypsum wallsR 225x365 mm
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
122 | WALL LUMINAIRES NORMALL
BIG The Big range is the larger brother of the ‘original’Normall
range of wall !xtures that was created over 17 years ago. The minimalist de-
sign is characterized by pure and simple lines, while the curved back is opti-
mized to create a great indirect lighting solution for integration in a range of
interiors. The wall light !xtures are fully paintable, but you could also try a
!nish with wall paper, gold leaf, or tadelakt: whatever !nish you choose, you
are sure that the Big will blend perfectly with your interior. And if you decide
to redecorate the place in a number of years, the Big will just adapt o your
new desires. And like all CALCYT® plaster !ttings, the installations will remain
free of plaster cracks as the light !xture shares the same thermal expansion
characteristics as regular plaster or plasterboard.
124 | WALL LUMINAIRES BIG
BIG HAL BIG FLUO PLASTERKIT BIG
REF N° 104 01 100 REF N° 104 01 026 REF N° 704 01 000
c QT-DE - max 100WR7s (74.5mm) - 230V/50Hz - H F - o - L - B IP20 - 850°C dimmable - A
V TC-DEL 26WG24q-3 - 230V/50Hz - H - incl. EVG F - o - L - B IP20 - 850°C A - s
For mounting into gypsum wallsR 268x395 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
126 | WALL LUMINAIRES
WALL LUMINAIRES | 127
BIG
XT The XT range is the extra large brother of the ‘original’
Normall range of wall !xtures that was created over 17 years ago. The XT
is ideal for environments where high light output is required, as the larger
dimensions of the luminaire are driven by its function to create and control
maximum indirect light output without glare. The XT shares the same pure
and simple lines of the Normall range. Its timeless and minimalistic design
will blend perfectly with your interior. As all CALCYT® plaster !ttings, the
XT is fully paintable. And because CALCYT® plaster !ttings share the same
thermal expansion characteristics as regular plaster or plasterboard, the
installations will remain free of plaster cracks.
128 | WALL LUMINAIRES XT
XT FLUO 42W XT FLUO 57W PLASTERKIT XT
REF N° 108 01 042 REF N° 108 01 057 REF N° 708 01 000
X TC-TEL 42WGX24q-4 - 230V/50Hz - H - incl. EVGF - o - L - B - IP20 - 850°C A - s
X TC-TEL 57WGX24q-5 - 230V/50Hz - H - incl. EVG F - o - L - B - IP20 - 850°C A - s
For mounting into gypsum wallsR 329x607 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
130 | WALL LUMINAIRES
WALL LUMINAIRES | 131
XT
MOOR A collection inspired by Moorish architecture, and a
style that is typical for the revival of exotic oriental architecture. The variety
of designs with di!erent decorative patterns inspires the lighting designer
to integrate this collection into a large range of projects. State of the art LED
units have been added to the range, allowing you to combine design and
energy e"ciency. The unique indirect wall light #xtures are fully paintable.
But at the same token, you could try a #nish with wall paper, gold leaf, or
tadelakt.
132 | WALL LUMINAIRES MOOR
MOOR 1 HAL MOOR 2 HAL MOOR 3 HAL MOOR 4 HAL
REF N° 101 01 060 REF N° 101 02 060 REF N° 101 03 060 REF N° 101 04 060
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
MOOR 1 FLUO MOOR 2 FLUO MOOR 3 FLUO MOOR 4 FLUO
REF N° 101 01 026 REF N° 101 02 026 REF N° 101 03 026 REF N° 101 04 026
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
MOOR 1 LED MOOR 2 LED MOOR 3 LED MOOR 4 LED
REF N° 101 21 000 warm white 2700°K - IP20REF N° 101 21 100 warm white 3000°K - IP20REF N° 101 21 200 neutral white 4000°K - IP20
REF N° 101 22 000 warm white 2700°K - IP20REF N° 101 22 100 warm white 3000°K - IP20REF N° 101 22 200 neutral white 4000°K - IP20
REF N° 101 23 000 warm white 2700°K - IP20REF N° 101 23 100 warm white 3000°K - IP20REF N° 101 23 200 neutral white 4000°K - IP20
REF N° 101 24 000 warm white 2700°K - IP20REF N° 101 24 100 warm white 3000°K - IP20REF N° 101 24 200 neutral white 4000°K - IP20
MOOR 1 LED DIM 1-10V MOOR 2 LED DIM 1-10V MOOR 3 LED DIM 1-10V MOOR 4 LED DIM 1-10V
REF N° 101 61 000 warm white 2700°K - IP20REF N° 101 61 100 warm white 3000°K - IP20REF N° 101 61 200 neutral white 4000°K - IP20
REF N° 101 62 000 warm white 2700°K - IP20REF N° 101 62 100 warm white 3000°K - IP20REF N° 101 62 200 neutral white 4000°K - IP20
REF N° 101 63 000 warm white 2700°K - IP20REF N° 101 63 100 warm white 3000°K - IP20REF N° 101 63 200 neutral white 4000°K - IP20
REF N° 101 64 000 warm white 2700°K - IP20REF N° 101 64 100 warm white 3000°K - IP20REF N° 101 64 200 neutral white 4000°K - IP20
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
Requires 24 VDC power supply Requires 24 VDC power supply Requires 24 VDC power supply Requires 24 VDC power supply
MOOR 5 HAL MOOR 6 HAL MOOR 7 HAL MOOR 8 HAL
REF N° 101 05 060 REF N° 101 06 060 REF N° 101 07 060 REF N° 101 08 060
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
MOOR 5 FLUO MOOR 6 FLUO MOOR 7 FLUO MOOR 8 FLUO
REF N° 101 05 026 REF N° 101 06 026 REF N° 101 07 026 REF N° 101 08 026
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
MOOR 5 LED MOOR 6 LED MOOR 7 LED MOOR 8 LED
REF N° 101 25 000 warm white 2700°K - IP20REF N° 101 25 100 warm white 3000°K - IP20REF N° 101 25 200 neutral white 4000°K - IP20
REF N° 101 26 000 warm white 2700°K - IP20REF N° 101 26 100 warm white 3000°K - IP20REF N° 101 26 200 neutral white 4000°K - IP20
REF N° 101 27 000 warm white 2700°K - IP20REF N° 101 27 100 warm white 3000°K - IP20REF N° 101 27 200 neutral white 4000°K - IP20
REF N° 101 28 000 warm white 2700°K - IP20REF N° 101 28 100 warm white 3000°K - IP20REF N° 101 28 200 neutral white 4000°K - IP20
MOOR 5 LED DIM 1-10V MOOR 6 LED DIM 1-10V MOOR 7 LED DIM 1-10V MOOR 8 LED DIM 1-10V
REF N° 101 65 000 warm white 2700°K - IP20REF N° 101 65 100 warm white 3000°K - IP20REF N° 101 65 200 neutral white 4000°K - IP20
REF N° 101 66 000 warm white 2700°K - IP20REF N° 101 66 100 warm white 3000°K - IP20REF N° 101 66 200 neutral white 4000°K - IP20
REF N° 101 67 000 warm white 2700°K - IP20REF N° 101 67 100 warm white 3000°K - IP20REF N° 101 67 200 neutral white 4000°K - IP20
REF N° 101 68 000 warm white 2700°K - IP20REF N° 101 68 100 warm white 3000°K - IP20REF N° 101 68 200 neutral white 4000°K - IP20
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
Requires 24 VDC power supply Requires 24 VDC power supply Requires 24 VDC power supply Requires 24 VDC power supply
134 | WALL LUMINAIRES
WALL LUMINAIRES | 135
MOOR
136 | WALL LUMINAIRES
WALL LUMINAIRES | 137
MOOR
MOOR 1 LARGE HAL MOOR 2 LARGE HAL MOOR 3 LARGE HAL MOOR 4 LARGE HAL
REF N° 102 01 060 REF N° 102 02 060 REF N° 102 03 060 REF N° 102 04 060
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
MOOR 1 LARGE FLUO MOOR 2 LARGE FLUO MOOR 3 LARGE FLUO MOOR 4 LARGE FLUO
REF N° 102 01 026 REF N° 102 02 026 REF N° 102 03 026 REF N° 102 04 026
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
MOOR 1 LARGE LED MOOR 2 LARGE LED MOOR 3 LARGE LED MOOR 4 LARGE LED
REF N° 102 21 000 warm white 2700°K - IP20REF N° 102 21 100 warm white 3000°K - IP20REF N° 102 21 200 neutral white 4000°K - IP20
REF N° 102 22 000 warm white 2700°K - IP20REF N° 102 22 100 warm white 3000°K - IP20REF N° 102 22 200 neutral white 4000°K - IP20
REF N° 102 23 000 warm white 2700°K - IP20REF N° 102 23 100 warm white 3000°K - IP20REF N° 102 23 200 neutral white 4000°K - IP20
REF N° 102 24 000 warm white 2700°K - IP20REF N° 102 24 100 warm white 3000°K - IP20REF N° 102 24 200 neutral white 4000°K - IP20
MOOR 1 LARGE LED DIM 1-10V MOOR 2 LARGE LED DIM 1-10V MOOR 3 LARGE LED DIM 1-10V MOOR 4 LARGE LED DIM 1-10V
REF N° 102 61 000 warm white 2700°K - IP20REF N° 102 61 100 warm white 3000°K - IP20REF N° 102 61 200 neutral white 4000°K - IP20
REF N° 102 62 000 warm white 2700°K - IP20REF N° 102 62 100 warm white 3000°K - IP20REF N° 102 62 200 neutral white 4000°K - IP20
REF N° 102 63 000 warm white 2700°K - IP20REF N° 102 63 100 warm white 3000°K - IP20REF N° 102 63 200 neutral white 4000°K - IP20
REF N° 102 64 000 warm white 2700°K - IP20REF N° 102 64 100 warm white 3000°K - IP20REF N° 102 64 200 neutral white 4000°K - IP20
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
Requires 24 VDC power supply Requires 24 VDC power supply Requires 24 VDC power supply Requires 24 VDC power supply
MOOR 5 LARGE HAL MOOR 6 LARGE HAL MOOR 7 LARGE HAL MOOR 8 LARGE HAL
REF N° 102 05 060 REF N° 102 06 060 REF N° 102 07 060 REF N° 102 08 060
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
QT-DE - Max 60W - R7s - 230V/50Hz - H dim - F o - L - B - IP20 - 850°C - A
MOOR 5 LARGE FLUO MOOR 6 LARGE FLUO MOOR 7 LARGE FLUO MOOR 8 LARGE FLUO
REF N° 102 05 026 REF N° 102 06 026 REF N° 102 07 026 REF N° 102 08 026
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
TC-DEL 26W - G24q-3 - 230V/50Hz - H incl. EVG - F - o - L - B - IP20 - 850°C - A
MOOR 5 LARGE LED MOOR 6 LARGE LED MOOR 7 LARGE LED MOOR 8 LARGE LED
REF N° 102 25 000 warm white 2700°K - IP20REF N° 102 25 100 warm white 3000°K - IP20REF N° 102 25 200 neutral white 4000°K - IP20
REF N° 102 26 000 warm white 2700°K - IP20REF N° 102 26 100 warm white 3000°K - IP20REF N° 102 26 200 neutral white 4000°K - IP20
REF N° 102 27 000 warm white 2700°K - IP20REF N° 102 27 100 warm white 3000°K - IP20REF N° 102 27 200 neutral white 4000°K - IP20
REF N° 102 28 000 warm white 2700°K - IP20REF N° 102 28 100 warm white 3000°K - IP20REF N° 102 28 200 neutral white 4000°K - IP20
MOOR 5 LARGE LED DIM 1-10V MOOR 6 LARGE LED DIM 1-10V MOOR 7 LARGE LED DIM 1-10V MOOR 8 LARGE LED DIM 1-10V
REF N° 102 65 000 warm white 2700°K - IP20REF N° 102 65 100 warm white 3000°K - IP20REF N° 102 65 200 neutral white 4000°K - IP20
REF N° 102 66 000 warm white 2700°K - IP20REF N° 102 66 100 warm white 3000°K - IP20REF N° 102 66 200 neutral white 4000°K - IP20
REF N° 102 67 000 warm white 2700°K - IP20REF N° 102 67 100 warm white 3000°K - IP20REF N° 102 67 200 neutral white 4000°K - IP20
REF N° 102 68 000 warm white 2700°K - IP20REF N° 102 68 100 warm white 3000°K - IP20REF N° 102 68 200 neutral white 4000°K - IP20
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
24VDC - I - 12W - incl. low voltage LED driver - parallel wiring - F - q L - B - IP20 - 850°C - A - s
Requires 24 VDC power supply Requires 24 VDC power supply Requires 24 VDC power supply Requires 24 VDC power supply
138 | WALL LUMINAIRES
WALL LUMINAIRES | 139
MOORMOOR
PLASTERKIT MOOR 1/2/3 PLASTERKIT MOOR 4/5 PLASTERKIT MOOR 6/7/8 POWER SUPPLY 24VDC
REF N° 701 01 000 REF N° 701 02 000 REF N° 701 03 000 For use with all LED and LED DIM versions of MOOR and MOOR LARGE
REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20
DIN rail power supply on request
For mounting into gypsum wallsR 225x400 mmHousing: perforated aluminium
For mounting into gypsum wallsR 225x445 mmHousing: perforated aluminium
For mounting into gypsum wallsR 225x480 mmHousing: perforated aluminium
W
PLASTERKIT MOOR LARGE 1/2/3 PLASTERKIT MOOR LARGE 4/5 PLASTERKIT MOOR LARGE 6/7/8 INTEGRATED POWER SUPPLY
REF N° 702 01 000 REF N° 702 02 000 REF N° 702 03 000 REF N° 697 02 020 ! 20W24VDC - 230V/50Hz - u - F - B - IP20Integrated power supply for Moor
For mounting into gypsum wallsR 225x500 mmHousing: perforated aluminium
For mounting into gypsum wallsR 225x545 mmHousing: perforated aluminium
For mounting into gypsum wallsR 225x580 mmHousing: perforated aluminium
140 | WALL LUMINAIRES
WALL LUMINAIRES | 141
MOOR
FRAME The mosaic-patterned gypsum, which forms a frame, is
based on the shape and technique of Islamic art sculptures from the 11th
century. A combination of craftsmanship and traditional skills results in an il-
luminated frame with a natural ambience and soft re!ections. The lamp can
be replaced through a unique system to "x or remove the plaster mosaic.
The Frame can be directly installed in a brick wall or in gypsum by means of
an optional plaster kit.
142 | WALL LUMINAIRES FRAME
FRAME PLASTERKIT FRAME
REF N° 109 01 100 REF N° 709 01 000
c QT-DE - max 100WR7s (74.5mm) - 230V/50Hz - H dimmable - R 324í521 mm - F o - L - B - IP20 - 850°C
For mounting into gypsum wallsR 324x522 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
144 | WALL LUMINAIRES
WALL LUMINAIRES | 145
FRAME
ORIENTATION LIGHTING
BUTTON 148
PICA 152
QUBY 156
BIBA 160
MINI 164
STRIPP 168
MOUSE 172
146 | ORIENTATION LIGHTING
ORIENTATION LIGHTING | 147
BUTTON The award winning Button series of orientation lights are
di!erent. Inspired by the traditional deep buttoned sofa, it has a gentle, soft,
leather like appearance. But make no mistake: like all our other series the but-
ton is made of fully paintable CALCYT® plaster. This means you can "nish it
the way you like, and it ensures Button will "t in any type of interior. For sure
the Button series look great with the lights on. But during the daytime, when
the lights are o!, Button will continue to surprise you with its nice structure
and surprising shadow lines. The unique 360 degrees recessed LED light al-
lows you to install the Button at various heights in the wall. Whatever the in-
stallation height, the button will always ensure glare free visual comfort. The
Button series provide you with design freedom: no longer does orientation
lighting need to be implemented in a linear fashion. With Button, you can
take a new approach and combine the light "xtures in a new, more random
way. All of this makes the button a unique orientation light - no wonder that
it has been recognized with the 2012 ‘design Plus award’ !
148 | ORIENTATION LIGHTING BUTTON
BUTTON 1 LED DIM LED DRIVER
REF N° 148 60 000 warm white 2700°K
REF N° 148 60 100 warm white 3000°K
REF N° 148 60 200 neutral white 4000°K
REF N° 148 60 300 royal blue
REF N° 697 00 006 ! 8WREF N° 697 00 015 ! 15W230V/50Hz - u - current controlled - F - B - IP20 - 350mA - not dimmable
I - 1W - excl. LED driver - current controlled 350 mA - F - q - L B - IP40 - A - s - serial wiring
LED DRIVER DIM
REF N° 697 60 006 ! 1!10V PUSH6W - 230V/50Hz - u - B - IP20 - 350mAREF N° 697 60 025 ! 1!10V DALI PUSH25W - 230V/50Hz - u - B - IP20 - 350mA
Requires external LED driver (dimmable or not dimmable)current controlled 350 mA
PLASTERKIT BUTTON
REF N° 748 01 000
For mounting into gypsum wallsR 175x175 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
230 VAC
���
���
����
���
���
���
��
150 | ORIENTATION LIGHTING BUTTON
PICA The PICA range is designed for recessed use in walls as
orientation lighting. The round shape of the range expresses its timeless and
minimalistic design. The PICA range is available in 2 sizes: PICA 3 and PICA 8.
The CALCYT® plaster !tting is fully paintable, while the truly trimless opaline
cover sits "ush with the wall to provide the best esthetics and visual com-
fort. The absence of a metal frame makes the !xture especially elegant. The
PICA 3 and 8 are equipped with state of the art LED technology. Besides
that, The PICA 8 is also available with the T2-6W compact "uorescent lamp
(230V). The PICA can be directly installed in solid walls as well as in gypsum
wall with an optional plasterkit.
152 | ORIENTATION LIGHTING PICA
PICA 3 LED PICA 3 LED DIM LED DRIVER
REF N° 124 20 000 warm white 2700°K
REF N° 124 20 100 warm white 3000°K
REF N° 124 20 200 neutral white 4000°K
REF N° 124 20 300 royal blue
REF N° 124 60 000 warm white 2700°K
REF N° 124 60 100 warm white 3000°K
REF N° 124 60 200 neutral white 4000°K
REF N° 124 60 300 royal blue
REF N° 697 00 006 ! 8WREF N° 697 00 015 ! 15W230V/50Hz - u - current controlled - F - B - IP20 - 350mA - not dimmable
I - 1W - incl. low voltage LED driver F - q - L - B - IP40 - A - s parallel wiring
Requires external 24 VDC power supply
I - 1W - excl. LED driver - current controlled 350 mA - F - q - L B - IP40 - A - s - serial wiring
LED DRIVER DIM
REF N° 697 60 006 ! 1!10V PUSH6W - 230V/50Hz - u - B - IP20 - 350mAREF N° 697 60 025 ! 1!10V DALI PUSH25W - 230V/50Hz - u - B - IP20 - 350mA
POWER SUPPLY 24 VDC Requires external LED driver (dimmable or not dimmable)current controlled 350 mA
PLASTERKIT PICA 3
REF N° 697 00 005 ! 10W230V/50Hz - u - F - B - IP20REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20
REF N° 724 01 000
For mounting into gypsum wallsR 85x85 mmHousing: perforated aluminium
PICA 8 FLUO PICA 8 LED PICA 8 LED DIM LED DRIVER
REF N° 125 23 006 REF N° 125 20 000 warm white 2700°K
REF N° 125 20 100 warm white 3000°K
REF N° 125 20 200 neutral white 4000°K
REF N° 125 20 300 royal blue
REF N° 125 60 000 warm white 2700°K
REF N° 125 60 100 warm white 3000°K
REF N° 125 60 200 neutral white 4000°K
REF N° 125 60 300 royal blue
REF N° 697 00 006 ! 8WREF N° 697 00 015 ! 15W230V/50Hz - u - current controlled F - B - IP20 - 350mA - not dimmable
w T2-6W - GX53 - 230V/50Hz - u incl EVG - F - q - L - B - IP44 850°C - A - s
I - 1W - incl. low voltage LED driver F - q - L - B - IP40 - A - s parallel wiring
Requires external 24 VDC power supply
I - 1W - excl. LED driver - current controlled 350 mA - F - q - L B - IP40 - A - s - serial wiring
LED DRIVER DIM
REF N° 697 60 006 ! 1!10V PUSH6W - 230V/50Hz - u - B - IP20 - 350mAREF N° 697 60 025 ! 1!10V DALI PUSH25W - 230V/50Hz - u - B - IP20 - 350mA
POWER SUPPLY 24 VDC Requires external LED driver (dimmable or not dimmable)current controlled 350 mA
PLASTERKIT PICA 8
REF N° 697 00 005 ! 10W230V/50Hz - u - F - B - IP20REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20
REF N° 725 01 000
For mounting into gypsum wallsR 132x132 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
230 VAC 230 VAC
230 VAC 230 VAC
154 | ORIENTATION LIGHTING
ORIENTATION LIGHTING | 155
PICA
QUBY The QUBY range is designed for recessed use in walls
as orientation lighting. The square shape of the range expresses its timeless
and minimalistic design. The CALCYT® plaster !tting is fully paintable, while
the truly trimless opaline cover sits "ush with the wall to provide the best
esthetics and visual comfort. The absence of a metal frame makes the !xture
especially elegant. The QUBY range can be equipped with state of the art
LED technology, or with the T2-6W compact "uorescent lamp (230V). The
QUBY can be directly installed in solid walls as well as in gypsum wall with an
optional plasterkit.
156 | ORIENTATION LIGHTING QUBY
QUBY FLUO QUBY LED QUBY LED DIM LED DRIVER
REF N° 126 23 007 REF N° 126 20 000 warm white 2700°K
REF N° 126 20 100 warm white 3000°K
REF N° 126 20 200 neutral white 4000°K
REF N° 126 20 300 royal blue
REF N° 126 60 000 warm white 2700°K
REF N° 126 60 100 warm white 3000°K
REF N° 126 60 200 neutral white 4000°K
REF N° 126 60 300 royal blue
REF N° 697 00 006 ! 8WREF N° 697 00 015 ! 15W230V/50Hz - u - current controlled F - B - IP20 - 350mA - not dimmable
w T2-6W - GX53 - 230V/50Hz - u incl EVG - F - q - L - B - IP44 850°C - A - s
I - 1W - incl. low voltage LED driver F - q - L - B - IP40 - A - s parallel wiring
Requires external 24 VDC power supply
I - 1W - excl. LED driver - current controlled 350 mA - F - q - L B - IP40 - A - s - serial wiring
LED DRIVER DIM
REF N° 697 60 006 ! 1!10V PUSH6W - 230V/50Hz - u - B - IP20 - 350mAREF N° 697 60 025 ! 1!10V DALI PUSH25W - 230V/50Hz - u - B - IP20 - 350mA
POWER SUPPLY 24 VDC Requires external LED driver (dimmable or not dimmable)current controlled 350 mA
PLASTERKIT QUBY
REF N° 697 00 005 ! 10W230V/50Hz - u - F - B - IP20REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20
REF N° 725 01 000
For mounting into gypsum wallsR 132x132 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
230 VAC
230 VAC
158 | ORIENTATION LIGHTING
ORIENTATION LIGHTING | 159
QUBY
BIBA The BIBA range is designed for recessed use in walls as
orientation lighting. The rectangular shape of the range expresses its time-
less and minimalistic design. The CALCYT® plaster !tting is fully paintable,
while the truly trimless opaline cover sits "ush with the wall to provide the
best esthetics and visual comfort. The absence of a metal frame makes the
!xture especially elegant. The BIBA range is equipped with state of the art
LED technology. The BIBA can be directly installed in solid walls as well as in
gypsum wall with an optional plasterkit.
160 | ORIENTATION LIGHTING BIBA
BIBA LED BIBA LED DIM LED DRIVER
REF N° 123 20 000 warm white 2700°K
REF N° 123 20 100 warm white 3000°K
REF N° 123 20 200 neutral white 4000°K
REF N° 123 20 300 royal blue
REF N° 123 60 000 warm white 2700°K
REF N° 123 60 100 warm white 3000°K
REF N° 123 60 200 neutral white 4000°K
REF N° 123 60 300 royal blue
REF N° 697 00 006 ! 8WREF N° 697 00 015 ! 15W230V/50Hz - u - current controlled - F - B - IP20 - 350mA - not dimmable
I - 1W - incl. low voltage LED driver F - q - L - B - IP40 - A - s parallel wiring
Requires external 24 VDC power supply
I - 1W - excl. LED driver - current controlled 350 mA - F - q - L B - IP40 - A - s - serial wiring
LED DRIVER DIM
REF N° 697 60 006 ! 1!10V PUSH6W - 230V/50Hz - u - B - IP20 - 350mAREF N° 697 60 025 ! 1!10V DALI PUSH25W - 230V/50Hz - u - B - IP20 - 350mA
POWER SUPPLY 24 VDC Requires external LED driver (dimmable or not dimmable)current controlled 350 mA
PLASTERKIT BIBA
REF N° 697 00 005 ! 10W230V/50Hz - u - F - B - IP20REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20
REF N° 723 01 000
For mounting into gypsum wallsR 82x169 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
230 VAC
230 VAC
162 | ORIENTATION LIGHTING
ORIENTATION LIGHTING | 163
BIBA
MINI The Mini range is the baby brother of the ‘original’ Nor-
mall range of wall !xtures that was created over 17 years ago. Pure and
simple lines are combined with state of the art, energy e"cient LED units
to create a timeless and minimalist design. The mini repeats the design lan-
guage of the Normall range, but now as an orientation light. Use Mini as an
uplight or downlight : the curved back is optimized to create a great indirect
orientation lighting experience. Use them in a linear pattern, or use them by
the pair, to create a di#erent approach. Mini will blend perfectly with your in-
terior. As all CALCYT® plaster !ttings, the Mini is fully paintable. And because
CALCYT® plaster !ttings share the same thermal expansion characteristics
as regular plaster or plasterboard, the installations will remain free of plaster
cracks.
164 | ORIENTATION LIGHTING MINI
MINI LED MINI LED DIM LED DRIVER
REF N° 149 20 000 warm white 2700°K
REF N° 149 20 100 warm white 3000°K
REF N° 149 20 200 neutral white 4000°K
REF N° 149 20 300 royal blue
REF N° 149 60 000 warm white 2700°K
REF N° 149 60 100 warm white 3000°K
REF N° 149 60 200 neutral white 4000°K
REF N° 149 60 300 royal blue
REF N° 697 00 006 ! 8WREF N° 697 00 015 ! 15W230V/50Hz - u - current controlled - F - B - IP20 - 350mA - not dimmable
I - 1W - incl. low voltage LED driver F - q - L - B - IP40 - A - s parallel wiring
Requires external 24 VDC power supply
I - 1W - excl. LED driver - current controlled 350 mA - F - q - L B - IP40 - A - s - serial wiring
LED DRIVER DIM
REF N° 697 60 006 ! 1!10V PUSH6W - 230V/50Hz - u - B - IP20 - 350mAREF N° 697 60 025 ! 1!10V DALI PUSH25W - 230V/50Hz - u - B - IP20 - 350mA
POWER SUPPLY 24 VDC Requires external LED driver (dimmable or not dimmable)current controlled 350 mA
PLASTERKIT MINI
REF N° 697 00 005 ! 10W230V/50Hz - u - F - B - IP20REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20
REF N° 749 01 000
For mounting into gypsum wallsR 82x169 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
230 VAC
230 VAC
��
���
����
���
�� ��
���
166 | ORIENTATION LIGHTING
ORIENTATION LIGHTING | 167
MINI
STRIPP The Stripp range consists of repetition of long and
narrow orientation lights Its minimalistic and timeless design accentuates
your architecture in many applications. The Stripp can be used as an up- or
downlight and is equipped with state of the art LED technology. The Stripp
can be directly installed in solid walls as well as in gypsum walls by means
of an optional plasterkit. And of course it is fully paintable, as all CALCYT®
plaster !ttings.
168 | ORIENTATION LIGHTING STRIPP
STRIPP LED STRIPP LED DIM LED DRIVER
REF N° 144 20 000 warm white 2700°K
REF N° 144 20 100 warm white 3000°K
REF N° 144 20 200 neutral white 4000°K
REF N° 144 20 300 royal blue
REF N° 144 60 000 warm white 2700°K
REF N° 144 60 100 warm white 3000°K
REF N° 144 60 200 neutral white 4000°K
REF N° 144 60 300 royal blue
REF N° 697 00 006 ! 8WREF N° 697 00 015 ! 15W230V/50Hz - u - current controlled - F - B - IP20 - 350mA - not dimmable
I - 1W - incl. low voltage LED driver F - q - L - B - IP40 - A - s parallel wiring
Requires external 24 VDC power supply
I - 1W - excl. LED driver - current controlled 350 mA - F - q - L B - IP40 - A - s - serial wiring
LED DRIVER DIM
REF N° 697 60 006 ! 1!10V PUSH6W - 230V/50Hz - u - B - IP20 - 350mAREF N° 697 60 025 ! 1!10V DALI PUSH25W - 230V/50Hz - u - B - IP20 - 350mA
POWER SUPPLY 24 VDC Requires external LED driver (dimmable or not dimmable)current controlled 350 mA
PLASTERKIT STRIPP
REF N° 697 00 005 ! 10W230V/50Hz - u - F - B - IP20REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20
REF N° 744 01 000
For mounting into gypsum wallsR 83x249 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
230 VAC
230 VAC
170 | ORIENTATION LIGHTING
ORIENTATION LIGHTING | 171
STRIPP
MOUSE Trendy is the word most people would use for the
Mouse orientation lights. Its organic shape, creates a unique appearance.
The range is sure to stand out, as it is di!erent from any other orientation
light. But at the same time, the fully paintable range of CALCYT® plaster "t-
tings will blend nicely in both traditional and contemporary interiors. The
Mouse range comes in 2 #avors: the clear and sharp edges of the Mouse use
our typical cutting edge design approach, where as the Mouse+ displays
the gentle, curved edges of the typical soft edge design from Brick In The
Wall. Both can be directly installed in solid walls or in gypsum wall with an
optional plasterkit.
172 | ORIENTATION LIGHTING MOUSE
MOUSE LED DIM MOUSE+ LED DIM LED DRIVER
REF N° 146 60 000 warm white 2700°K
REF N° 146 60 100 warm white 3000°K
REF N° 146 60 200 neutral white 4000°K
REF N° 146 60 300 royal blue
REF N° 147 60 000 warm white 2700°K
REF N° 147 60 100 warm white 3000°K
REF N° 147 60 200 neutral white 4000°K
REF N° 147 60 300 royal blue
REF N° 697 00 006 ! 8WREF N° 697 00 015 ! 15W230V/50Hz - u - current controlled - F - B - IP20 - 350mA - not dimmable
I - 1W - excl. LED driver - current controlled 350 mA - F - q - L B - IP40 - A - s - serial wiring
I - 1W - excl. LED driver - current controlled 350 mA - F - q - L B - IP40 - A - s - serial wiring
LED DRIVER DIM
REF N° 697 60 006 ! 1!10V PUSH6W - 230V/50Hz - u - B - IP20 - 350mAREF N° 697 60 025 ! 1!10V DALI PUSH25W - 230V/50Hz - u - B - IP20 - 350mA
Requires external LED driver (dimmable or not dimmable)current controlled 350 mA
Requires external LED driver (dimmable or not dimmable)current controlled 350 mA
PLASTERKIT MOUSE MOUSE+
REF N° 747 01 000
For mounting into gypsum wallsR 175x175 mmHousing: perforated aluminium
Any colour: paintable plaster
Ready for installation in solid walls
Optional plasterkit for installation into gypsum walls
230 VAC 230 VAC
174 | ORIENTATION LIGHTING
ORIENTATION LIGHTING | 175
MOUSE
PROFILES
STREET 178
AUTOBAHN 182
SIDEWAY 192
176 | PROFILES
PROFILES | 177
STREET The minimalistic design of the Street creates a language
of pure and simple lines within the architecture. The range is designed for
orientation lighting purposes. The asymmetric shape of the re!ector guar-
antees maximum light output without glare. The Street can be used as sepa-
rate units to enhance some lines or as one concept based on interconnect-
ed modules. The Street range is made of fully paintable CALCYT® plaster, and
is equipped with energy e"cient LED solutions.
178 | PROFILES STREET
STREET 400 LED STREET MODULE 400 LED STREET ENDCAP RIGHT POWER SUPPLY 24 VDC
REF N° 157 21 100 warm white 3000°KREF N° 157 21 200 neutral white 4000°K REF N° 157 21 300 royal blueREF N° 157 21 400 red
REF N° 158 21 100 warm white 3000°KREF N° 158 21 200 neutral white 4000°K REF N° 158 21 300 royal blueREF N° 158 21 400 red
REF N° 158 20 101 REF N° 697 00 005 ! 10W230V/50Hz - u - F - B - IP20REF N° 697 00 025 ! 25W230V/50Hz - u - F - B - IP20
DIN rail power supply on request
I - 1W - 12 x SMD LED - incl. low voltage LED driver F - q - L - B IP20 - s - parallel wiring
I - 1W - 12 x SMD LED - incl. low voltage LED driver F - q - L - B IP20 - s - parallel wiring
Requires external 24 VDC power supply Requires external 24 VDC power supply
STREET ENDCAP LEFT
REF N° 158 20 102
Any colour: paintable plaster
Ready for installation in solid walls
180 | PROFILES
PROFILES | 181
STREET
AUTOBAHN The Autobahn range of truly trimless pro!les is a great
example of the ‘invisible integration of light’ approach of Brick In The Wall.
Autobahn is a U-shaped pro!le that uses energy e"cient seamless T5 lamps,
in order to create pro!les free of dark zones. The pro!les can be installed in
the ceiling, in the wall, or in both. Autobahn is available in !xed length single
units, or as a modular system that allows you to create your own implemen-
tations. The unique installation system allows you to install the Autobahn
pro!le in the same, easy way as you would install regular plasterboard. On
top of this, the pro!les are pre-wired using our ‘click-to wire’ installation ap-
proach. This translates into ease of use, and reduced installation time. The
fully paintable Autobahn series creates minimalistic and timeless pro!les
that are in perfect harmony with the architecture. Unlike other socalled
trimless pro!les, Autobahn o#ers a truly trimless solution. The absence of
a metal frame is not only aesthetically pleasing, it also ensures stable, high
quality installations that remain free of plaster cracks for the long haul. After
all, our Autobahn pro!les share the same thermal expansion characteristics
as regular plaster or plasterboard.
182 | PROFILES AUTOBAHN
AUTOBAHN 60/58 AUTOBAHN 60/88 AUTOBAHN 60/118 AUTOBAHN 60/236
REF N° 460 15 058 REF N° 460 15 088 REF N° 460 15 118 REF N° 460 15 236
1! T16-S - 14/24W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
1! T16-S - 21/39W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
1! T16-S - 28/54W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
2! T16-S - 28/54W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
AUTOBAHN 60/58 DIM 1-10V AUTOBAHN 60/88 DIM 1-10V AUTOBAHN 60/118 DIM 1-10V AUTOBAHN 60/236 DIM 1-10V
REF N° 460 18 058 REF N° 460 18 088 REF N° 460 18 118 REF N° 460 18 236
1! T16-S - 14/24W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
1! T16-S - 21/39W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
1! T16-S - 28/54W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
2! T16-S - 28/54W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
Requires 1-10V interface module Requires 1-10V interface module Requires 1-10V interface module Requires 1-10V interface module
���
���
���
���
���
�����
����
���
���
����
���
����
���
�����
��
���
��
����
����
���
����
���
�����
��
���
��
����
����
���
����
���
�����
��
���
��
184 | PROFILES
PROFILES | 185
AUTOBAHN
AUTOBAHN 60 MODULE 58 AUTOBAHN 60 MODULE 88 AUTOBAHN 60 MODULE 118 AUTOBAHN 60 MODULE 236
REF N° 461 15 058 REF N° 461 15 088 REF N° 461 15 118 REF N° 461 15 236
1! T16-S - 14/24W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
1! T16-S - 21/39W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
1! T16-S - 28/54W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
2! T16-S - 28/54W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
AUTOBAHN 60 M 58 DIM 1-10V AUTOBAHN 60 M 88 DIM 1-10V AUTOBAHN 60 M 118 DIM 1-10V AUTOBAHN 60 M 236 DIM 1-10V
REF N° 461 18 058 REF N° 461 18 088 REF N° 461 18 118 REF N° 461 18 236
1! T16-S - 14/24W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
1! T16-S - 21/39W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
1! T16-S - 28/54W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
2! T16-S - 28/54W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
Requires 1-10V interface module Requires 1-10V interface module Requires 1-10V interface module Requires 1-10V interface module
1-10V INTERFACE MODULE
REF N° 696 18 000
230V/50Hz - 1-10V interface Can drive up to 2 x 10 modules
AUTOBAHN 60 ENDCAP RIGHT
REF N° 462 00 101
AUTOBAHN 60 ENDCAP LEFT
REF N° 462 00 102���
���
�����
��
���
��
���
���
�����
��
���
�����
����
�����
��
���
��
���
����
�����
��
���
��
���
���
186 | PROFILES
PROFILES | 187
AUTOBAHN
AUTOBAHN 60 CORNER 90 AUTOBAHN 60 CORNER M 58 AUTOBAHN 60 CORNER M 88 AUTOBAHN 60 CORNER M 118
REF N° 463 00 090 REF N° 464 15 058 REF N° 464 15 088 REF N° 464 15 118
1! T16-S - 21/39W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
1! T16-S - 28/54W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
2! T16-S - 28/54W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
AUTOBAHN 60 CORNER M 58 DIM 1-10V
AUTOBAHN 60 CORNER M 88 DIM 1-10V
AUTOBAHN 60 CORNER M 118 DIM 1-10V
REF N° 464 18 058 REF N° 464 18 088 REF N° 464 18 118
1! T16-S - 21/39W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
1! T16-S - 28/54W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
2! T16-S - 28/54W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
Requires 1-10V interface module Requires 1-10V interface module Requires 1-10V interface module
AUTOBAHN 60 3D CORNER 90
REF N° 465 00 090
���
���
���
���
���
���
���
���
���
���
���
���
188 | PROFILES
PROFILES | 189
AUTOBAHN
��� ������ ��� ���
��� ������ ��� ���
��� ������� ���� ����
��� �������
���
���
������
���
���
���
������
���
���
���
�������
���
CONFIGURATION EXAMPLES AUTOBAHN 60 CONFIGURATION EXAMPLES AUTOBAHN 60WITH 90° CORNER
190 | PROFILES
PROFILES | 191
AUTOBAHN
SIDEWAY The Sideway range of truly trimless pro!les is a great
example of the ‘invisible integration of light’ approach of Brick In The Wall.
Sideway is an asymmetric pro!le that can be used for di"erent architectural
lighting purposes. Installed in the ceiling, Sideway would work as a perfect
wallwasher. But one could also use Sideway in the wall as an indirect up- or
downlighter. The entire range uses energy e#cient seamless T5 lamps, in or-
der to create pro!les free of dark zones. Sideway is available in !xed length
single units, or as a modular system that allows you to create your own imple-
mentations. The unique installation system allows you to install the Sideway
pro!le in the same, easy way as you would install regular plasterboard. On
top of this, the pro!les are prewired using our ‘click-to wire’ installation ap-
proach. This translates into ease of use, and reduced installation time. The fully
paintable Sideway series creates minimalistic and timeless pro!les that are in
perfect harmony with the architecture. Unlike other so-called trimless pro!les,
Sideway o"ers a truly trimless solution. The absence of a metal frame is not
only aesthetically pleasing, it also ensures stable, high quality installations that
remain free of plaster cracks for the long haul. After all, our Sideway pro!les
share the same thermal expansion characteristics as regular plaster or plaster-
board.
192 | PROFILES SIDEWAY
SIDEWAY 80/58 SIDEWAY 80/88 SIDEWAY 80/118 SIDEWAY 80/236
REF N° 480 15 058 REF N° 480 15 088 REF N° 480 15 118 REF N° 480 15 236
1! T16-S - 14/24W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
1! T16-S - 21/39W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
1! T16-S - 28/54W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
2! T16-S - 28/54W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
SIDEWAY 80/58 DIM 1-10V SIDEWAY 80/88 DIM 1-10V SIDEWAY 80/118 DIM 1-10V SIDEWAY 80/236 DIM 1-10V
REF N° 480 18 058 REF N° 480 18 088 REF N° 480 18 118 REF N° 480 18 236
1! T16-S - 14/24W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
1! T16-S - 21/39W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
1! T16-S - 28/54W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
2! T16-S - 28/54W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
Requires 1-10V interface module Requires 1-10V interface module Requires 1-10V interface module Requires 1-10V interface module
���
���
���
��
���
������
���
���
��
���
����
����
��
���
������
���
���
��
����
����
����
��
���
������
���
���
��
����
����
����
���
���
��
���
������
��
194 | PROFILES
PROFILES | 195
SIDEWAY
SIDEWAY 80 MODULE 58 SIDEWAY 80 MODULE 88 SIDEWAY 80 MODULE 118 SIDEWAY 80 MODULE 236
REF N° 481 15 058 REF N° 481 15 088 REF N° 481 15 118 REF N° 481 15 236
1! T16-S - 14/24W - G5 - 230V/50Hz H - incl EVG -u - o - L - B - IP20 850°C - A - s
1! T16-S - 21/39W - G5 - 230V/50Hz H - incl EVG -u - o - L - B - IP20 850°C - A - s
1! T16-S - 28/54W - G5 - 230V/50Hz H - incl EVG -u - o - L - B - IP20 850°C - A - s
2! T16-S - 28/54W - G5 - 230V/50Hz H - incl EVG -u - o - L - B - IP20 850°C - A - s
SIDEWAY 80 M 58 DIM 1-10V SIDEWAY 80 M 88 DIM 1-10V SIDEWAY 80 M 118 DIM 1-10V SIDEWAY 80 M 236 DIM 1-10V
REF N° 481 18 058 REF N° 481 18 088 REF N° 481 18 118 REF N° 481 18 236
1! T16-S - 14/24W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
1! T16-S - 21/39W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
1! T16-S - 28/54W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
2! T16-S - 28/54W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
Requires 1-10V interface module Requires 1-10V interface module Requires 1-10V interface module Requires 1-10V interface module
1-10V INTERFACE MODULE
REF N° 696 18 000
230V/50Hz - 1-10V interface Can drive up to 2 x 10 modules
SIDEWAY 80 ENDCAP RIGHT
REF N° 482 00 101
SIDEWAY 80 ENDCAP LEFT
REF N° 482 00 102���
���
��
���
������
��
���
���
��
���
������
�����
����
��
���
������
��
���
����
��
���
������
��
���
���
196 | PROFILES SIDEWAY
SIDEWAY 80 CORNER 90 SIDEWAY CORNER M 58 SIDEWAY CORNER M 88 SIDEWAY CORNER M 118
REF N° 483 00 090 REF N° 484 15 058 REF N° 484 15 088 REF N° 484 15 118
1! T16-S - 21/39W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
1! T16-S - 28/54W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
2! T16-S - 28/54W - G5 - 230V/50Hz u - incl EVG - F - o - L - B IP20 - 850°C - A - s
SIDEWAY CORNER M 58 DIM 1-10V
SIDEWAY CORNER M 88 DIM 1-10V
SIDEWAY CORNER M 118 DIM 1-10V
REF N° 484 18 058 REF N° 484 18 088 REF N° 484 18 118
1! T16-S - 21/39W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
1! T16-S - 28/54W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
2! T16-S - 28/54W - dimmableG5 - 230V/50Hz - u - incl EVGDF - o - L - B - IP20 - 850°C A - s
Requires 1-10V interface module Requires 1-10V interface module Requires 1-10V interface module
���
���
���
���
���
���
���
���
198 | PROFILES
PROFILES | 199
SIDEWAY
CUSTOM ARCHITECTURAL
Brick In The Wall is also the perfect partner for all your custom designs. Did you want to customize some of our ex-
isting products? We can do it! You like the unique appearance of the Frame wall luminaire, but would like use your
own design for the front plate? It can be done. Or would you like to apply the MOOR range for outdoor lighting? Not
a problem. You want to use the Flush 228 as a wall luminaire with indirect LED lighting? Sure. You fell in love with the
award winning ATMOS range, but would want to apply it in a curved ceiling? Well, it’s a challenge, but we’ve done it !
Or do you prefer to start from scratch, and create your own brave new design? We are willing to work with you!
Starting from your design aspiration, we will !rst of all make all make a technical feasibility assessment. Based upon
the analysis and upon the projected volumes we will provide you with a budgetary quote. Once the project has
your go ahead, we will agree and sign o" on the !nal speci!cations, and move into the prototyping phase. Upon
your review and approval of the prototype we will !nally move into full production.
Does size matter? The answer is: yes and no. We’ve made custom designs with all sizes of products, from small to
large, to very large. Of course, the technical complexities are di"erent and in general more challenging for large
architectural creations. That is why Brick In The Wall in its approach will always look at at ease of installation, next to
the pure product design. After all, the greatest design is useless unless it can be properly installed and !nished. Still
concerned? Well, on request we can also provide you with a turn key solution.
Large architectural pieces will typically require a level of customization of their own. But to make things easier we
are o"ering you 2 ranges of architectural products that are ready for further customizations. Turn to the next pages
and have a look at the Dionea and Floyd ranges.
200 | CUSTOM ARCHITECTURAL
CUSTOM ARCHITECTURAL | 201
DIONEA The inspiration for the Dionea comes from the famous
‘Venus Flytrap’ plant. The result is a unique architectural light statement with
generous dimensions. Just like its carnivorous virtual sibling, the Dionea has
a fascinating and intriguing appeal that is sure to draw the attention and
the interest of your guests. Made of fully paintable CALCYT® plaster, the truly
trimless light !xture will remain free of plaster cracks. Dionea is a work of
art and a true masterpiece. Dionea is available as a wall light !xture or as
a recessed ceiling !xture. Both versions can be further customized to your
desires!
DIONEA WALL DIONEA CEILING
REF N° 351 15 054 REF N° 351 10 050
2" T16-S - 28/54W - G5 - 230V/50Hzu - incl EVG - F - o - L - B - IP20 850°C - A - s
6" - N QR-CBC 51 - 20-35-50WGx5.3 - 12V - I - excl. transfo - F o - K - B - C - IP20 - 850°C dimmable
Other versions available on request Other versions available on request
���
���
���
������
����
���
������
��
��
���
���
�����
������
��
��
���
���
�����
������
��
��
���
���
�����
������
��
��
���
���
�����
������
��
��
���
���
�����
������
��
��
���
���
�����
���
���
���
������
����
���
202 | CUSTOM ARCHITECTURAL
CUSTOM ARCHITECTURAL | 203
DIONEA
FLOYD The minimalistic design of the Floyd range stands
in sharp contrast with its maximalistic dimensions. The architectural light
!xture with its gentle curves seems to "oat into the architecture. The fully
paintable Floyd series creates timeless !xtures that are in perfect harmony
with the architecture. Unlike other so-called trimless products, Floyd o#ers a
truly trimless solution. The absence of a metal frame is not only aesthetically
pleasing, it also ensures stable, high quality installations that remain free of
plaster cracks for the long haul. After all, our Floyd CALCYT® range share the
same thermal expansion characteristics as regular plaster or plasterboard.
Floyd can be used as a wall light !xture or as a recessed ceiling !xture. The
Floyd range is available in 2 sizes. Both versions can be further customized
to your desires!
FLOYD 90 FLOYD 120
REF N° 361 15 090 REF N° 361 15 120
4$ T16-S - 28/54W - G5230V/50Hz - u - incl EVG - Fo - J - B - IP20 850°CA - s
4$ T16-S - 28/54W - G5230V/50Hz - u - incl EVG - Fo - J - B - IP20 850°CA - s
Other versions available on request Other versions available on request
����
����
¡����
����
����
¡����
����
����
¡����
����
����
¡����
204 | CUSTOM ARCHITECTURAL
MORE INFORMATION | 205
FLOYD
DEUTSCH ESPANOL ITALIANO
H GERÄT KLASSE 1 APARATO CLASE 1 APPARECCHIO CLASSE 1
u GERÄT KLASSE 2 APARATO CLASE 2 APPARECCHIO CLASSE 2
I GERÄT KLASSE 3 APARATO CLASE 3 APPARECCHIO CLASSE 3
EVGELEKTRONISCHES DIMBARES VORSCHALTGERÄT
EQUIPO ELECTRÓNICO REATTORE ELETTRONICO
EVGDEQUIPO ELECTRÓNICO REGULABLE
REATTORE ELETTRONICO DIMMERABILE
CSCHWENKBAR IN ALLEN RICHTUNGEN
ORIENTABLE EN EL PLANO HORIZONTAL Y VERTICAL
ORIENTABLE SUL PIANO ORRIZONTALE E VERTICALE
850° GLÜHTEST ENSAYO DE RECOCIDO FILO INCANDESCENTE
IP SCHUTZKENNZIFFER CLASE DE PROTECCIÓN CLASSE DI PROTEZIONE
A MIT PLEXI ODER SCHUTZGLAS CON CRISTAL DE PROTECCIÓN/ PROTEZIONE PLEXI/FORNITO DE
G MIT UV!FILTER AUSGESTÄTTETCON PROTECCIÓN PLEXI EQUIPADO CON FILTRO UV
VETRO DI PROTEZIONE FORNITO DI FILTRO UV
FFÜR MONTAGE AUF NORMAL ENTFLAMBARE OBERFLÄCHEN
PARA MONTÁJE EN SUPERFICIES NORMAMENTE INFLAMMABLES
PER MONTAGGIO SU SUPERFICINORMALMENTE INFIAMMABILI
ENICHT FÜR MONTAGE AUF NORMAL ENTFLAMBARE OBERFLÄCHEN
NO PARA MONTÁJE EN SUPERFICIESNORMAMENTE INFLAMMABLES
NON PER MONTAGGIO SU SUPERFICINORMALMENTE INFIAMMABILI
K DECKENMONTAGE FIJACIÓN A TECHO MONTAGGIO A SOFFITTO
L WANDMONTAGE FIJACIÓN A PARED MONTAGGIO A PARETE
J DECKEN! UND WANDMONTAGE FIJACIÓN A TECHO Y A PARED MONTAGGIO A SOFFITTO E A PARETE
D DIMBAR REGULABLE DIMMERABILE
o SICHERHEITSABSTAND DISTANCIA DE SEGURIDAD DISTANZA DI SICURREZA
R RECHTECKIGE ÖFFNUNG APERTURA RECTANGULAR FORO RETTANGOLARE
NEDERLANDS FRANÇAIS ENGLISH
H TOESTEL KLASSE I APPAREIL CLASSE 1 FIXTURE CLASS 1
u TOESTEL KLASSE 2 APPAREIL CLASSE 2 FIXTURE CLASS 2
I TOESTEL KLASSE 3 APPAREIL CLASSE 3 FIXTURE CLASS 3
EVGELECTRONISCH VOORSCHAKELAPPARATUUR
BALLAST ÉLECTRONIQUE ELECTRONIC BALLAST
EVGDDIMBAAR ELECTRONISCH VOORSCHAKELAPPARATUUR
BALLAST ÉLECTRONIQUE DIMMABLE
ELECTRONIC DIMMABLE BALLAST
C RICHTBAAR IN ALLE RICHTINGEN ORIENTABLE ET INCLINABLEROTATE AND TILT ALL DIRECTIONS
850° GLOEIDRAADTEST TEST FIL INCANDESCENT GLOWTEST
IP BESCHERMINGSINDICATIE INDICE DE PROTECTION PROTECTION DEGREE
A PLEXI OF GLAS BESCHERMING PROTECTION PLEXI OU VERRE ACRYLIC OR GLASS PROTECTION
G VOORZIEN VAN UV FILTER ÉQUIPÉ D’UN FILTRE UV EQUIPPED WITH UV FILTER
FVOOR MONTAGE OP NORMAAL ONTVLAMBARE OPPERVLAKKEN
POUR MONTAGE SUR DES SURFACES NORMALLEMENT INFLAMMABLES
FOR MOUNTING ONTO NORMALLY FLAMMABLE SURFACES
ENIET VOOR MONTAGE OP NORMAAL ONTVLAMBARE OPPERVLAKKEN
PAS PRÉVU POUR MONTAGE SUR DES SURFACES NORMALLEMENT
NOT FOR MOUNTING ONTO NORMALLY FLAMMABLE SURFACES
K PLAFONDBEVESTIGING MONTAGE AU PLAFOND CEILING MOUNTED
L WANDBEVESTIGING MONTAGE AU MUR WALL MOUNTED
J PLAFOND! EN WANDBEVESTIGING MONTAGE AU PLAFOND ET MUR CEILING AND WALL MOUNTED
D DIMBAAR GRADUABLE DIMMABLE
o VEILIGHEIDSAFSTAND DISTANCE DE SÉCURITÉ SAFETY DISTANCE
R RECHTHOEKIGE INBOUWOPENING DÉCOUPE RECTANGULAIRE RECTANGULAR CUT OUT
206 | MORE INFORMATION
MORE INFORMATION | 207
LEGEND
All information in this catalogue without engage-ment, replaces all preceding information and can be always modi!ed. All Brick in the Wall® N.V. products are supllied without lamps. Brick in the Wall® N.V. has the right to change at any time the technical aspects of its products without foregoing communication. The Brick in the Wall terms and conditions are always applicable. No part of this catalogue may be copied without written authorisation of Brick in the Wall® N.V. Made in Belgium.
Copyright © 2010-2012 Brick in the Wall® N.V.
HEADQUARTERS & FACTORY
E. Bekaertlaan 53
8790 WAREGEM
BELGIUM
T +32 56 60 40 90
F +32 56 60 87 26
www. brickinthewall.eu
208 | MORE INFORMATION CONTACT
ACKNOWLEDGEMENTS
The creation of this catalogue would not have been possible without the sup-
port of many people. The team at Brick In The Wall expresses its gratitude to all
our partners for their contribution and for their cooperation. The project pho-
tos on the following pages of the catalogue have been provided by courtesy
of the following partners:
ACCESSORI | p 40 ! 41 ! 126
design & build by CORDEEL NV | p 10 - 11 - 13 - 17 - 89
CREA LUCE | p 56 - 60
DESIGN & INTERIOR | p 44
INTEGRAL | p 30 - 96
LICHTHUIS SPECTRUM | p 102 - 103
SAVELEC | p 31 - 47
WWW.MARGOTMARTENS.BE | p 37 - 73 - 74 - 76 - 99 - 100 - 117 - 151 - 165 - 166 - 191 - 192
210 | MORE INFORMATION