AquaTra
AT600 clcost-effe
AquaTra
ans AT600 U
amp-on ultective.
ans AT868 U
GE
F
Ultrasonic L
rasonic flow
Ultrasonic L
MEAS
FLOW MEAS
Liquid Flow
w meter for l
Liquid Flow
SURE
SUREMENT -
Meter
liquids is de
Meter
EMEN
- LIQUID
signed to be
NT
e accurate, durable andd
AquaTrans AT868 ultrasonic water flow meter is a rugged, low-cost transmitter .
DigitalFlow XMT868i
XMT868i ultrasonic flow transmitter combines state-of-the-art flow measurement capability with a low-cost transmitter for liquid application. Appropriate certification for installation in hazardous (classified) locations.
PanaFlow Z3 Ultrasonic Liquid Flow Meter
a three-path wetted meter designed specifically for low-risk, accurate and repeatable measurement of nominal temperature liquids.
Sentinel LCT4 High Accuracy Liquid Flow Meter
Sentinel LCT4 is a new addition to the Panametrics line of ultrasonic flow meters. Designed specifically for high accuracy measurement of crude oil, other liquid refined hydrocarbon products, and other non-hydrocarbon liquids, it delivers extremely reliable and repeatable results and meets the strict performance requirements of OIML R117-1 and API MPMS.
Sentinel LCT (Liquid Custody Transfer) Flow Meter
designed to meet the strict requirements for custody transfer of hydrocarbons. Its four-path, Robust Path Configuration provides trouble-free operation that will not drift.
Sentinel LNG - Ultrasonic Flow Meter for Cryogenic Liquids
has no moving parts and uses four-path Robust Path Configuration. Sentinel LNG uses Bundle Waveguide Technology to direct greater tranducer signals into the process while protecting the transducers from cryogenic temperatures.
TransPort PT878 Portable Ultrasonic Liquid Flow Meter.
measures flow from outside plastic, metal or concrete-lined pipes non-intrusively, so theres no pressure drop, leaks or contamination.
FLOW MEASUREMENT GAS
DigitalFlow GM868 General Purpose Gas Ultrasonic Flow Meter
GM868 general-purpose flow meter measures gas flow in pipes or ducts.
DigitalFlow XGM868i - Gas Flow Ultrasonic Transmitter
XGM868i gas flow transmitter is a low-cost, transmitter-based version of the GM868 general-purpose gas flow meter. Like the GM868 flow meter, the XGM868i transmitter uses the ultrasonic transit-time technique for measuring gas flow.
DigitalFlow CTF878 (Clamp-On Ultrasonic Gas Flow Meter)
CTF878 brings clamp-on ultrasonic gas flow metering to atmospheric pressure applications at velocities up to 150 ft/s (46m/s). It uses the correlation tag ultrasonic flow measurement technique to measure accurately and reliably the flow of natural gas, compressed air, inert gas or any other gases.
TransPort PT878GC Portable Ultrasonic Gas Flow
Clamp-on ultrasonic gas flow metering. Designed for short-term flow survey work for natural gas pipeline, compressed air, inert gas or any compressed gas applications, it has the ability to measure gas flow rates, log data to internal memory and export flow data to a PC.
DigitalFlow GF868 Flare Gas Mass Ultrasonic Flow Meter
GF868 flare gas flow meter improves the efficiency of petrochemical plants, refineries and offshore platforms. It uses a proprietary algorithm to determine instantaneously the molecular weight and mass flow rate of the flare gas.
DigitalFlow XGF868i - Flare Gas Ultrasonic Flow Meter
XGF868i not only improves the efficiency of petrochemical plants, refineries and offshore platforms but is used to conserve energy and reduce product loss by identifying sources of leaks into flare systems.
FLOW MEASUREMENT STEAM
DigitalFlow GS868 Steam Mass Ultrasonic Flow Meter
GS868 ultrasonic steam flow meters solves the problems of pressure drop and rangeability found in other flow meters by reducing operation, installation and maintenance costs.
DigitalFlow XGS868i Steam Mass Ultrasonic Flow Transmitter
a complete ultrasonic flow metering system for the measurement of saturated and superheated steam. no pressure drop; has no moving parts or parts that foul or collect debris; seldom requires maintenance; and provides reliable, drift-free operation.
PanaFlow Z1G - Volumetric Gas Flow Meter
It is a single-path wetted meter designed specifically for accurate and dependable measurements in gas applications.
VORTEX FLOW METER
PanaFlow MV80 In-line Multivariable Mass Vortex Flow
MV80 in-line multivariable mass vortex flow meter
consists of a vortex shedding velocity sensor, an RTD temperature sensor and a solid state pressure transducer that measures the mass flow rate of steam, gases and liquids.
PanaFlow MV82 Insertion Multivariable Mass Vortex Flow Meter
MV82 insertion multivariable mass vortex flow meter
MV82s multivariable design consists of a vortex shedding velocity sensor, an RTD temperature sensor and a solid state pressure transducer that measures the mass flow rate of steam, gases and liquids.
MOISTURE & HUMIDITY MEASUREMENT
We offer reliable moisture analyzers with a combination of features to suit individual needs and budget. In addition, the aluminum oxide moisture probes offer superior sensitivity, speed of response, and calibration stability. The moisture generators are designed to generate precise, repeatable levels of water vapor pressure in a carrier gas stream.
Moisture Analyzers
Aurora TDLAS Hygrometer
The Aurora utilizes tunable diode laser absorption spectroscopy to measure moisture in natural gas rapidly and accurately.
Moisture Image Series 1
The MIS 1 analyzer is the top-of-the-line model in GE family of Moisture Series analyzers.
Moisture Monitor Series 3
The MMS3 is a single- or dual-channel analyzer with an alphanumeric LCD for moisture, oxygen, temperature and other parameters.
Moisture Monitor Series 35
The MMS 35 single-channel hygrometer combines our M Series moisture probe with state-of-the-art electronics.
DewPro MMY2650
This trace moisture analyzer is designed to operate with the DY5 or DY55 planar gold aluminum oxide dew point sensor.
Moisture Transmitters
HygroPro
HygroPro is a loop-powered, intrinsically safe moisture transmitter for measuring the moisture content in gases and non-aqueous liquids.
DewPro MMY31
This dew point transmitter is cost effective and designed for "in-line" installation where trace moisture measurement is required.
DewPro MMY30
The DewPro MMY 30 is a loop-powered dew point transmitter for analyzing moisture content.
HygroTrace
HygroTrace Ultra-Low Moisture Transmitter measures moisture content in the parts per billion range in nitrogen and argon gas.
Portable Hygrometers
PM880
This portable hygrometer for measuring the moisture/humidity content of industrial gases and liquids.
PM880 AC
This rugged, line-powered, portable hygrometer measures moisture in gases and non-aqueous liquids.
Moisture Monitor Series 35 IS
The MMS 35 IS portable hygrometer is certified intrinsically safe, is battery powered, and is housed in a damage-resistant case.
DewPro MMY245
This convenient, portable instrument can quickly spot check the performance of gas dryers.
Chilled Mirror Hygrometers
Optica
The Optica Chilled Mirror Hygrometer offers precision dew point measurement.
OptiSonde
The OptiSonde Chilled Mirror Hygrometer offers precision humidity and temperature measurement.
Dew-10 Transmitter
This family of low cost, high performance chilled mirror dew point transmitters is comprised of pipe, duct, and wall mount models.
Industrial Relative Humidity
DewPro MMR101
The DewPro MMR 101 is a high temperature loop-powered moisture and temperature transmitter.
DewPro MMR30
This compact, mid-range moisture transmitter probe is designed specifically for refrigeration dryer monitoring.
DewPro MMR31
The DewPro MMR 31 loop-powered mid-range moisture transmitter represents a simple, cost effective solution for mid-range moisture measurement.
RH-Plus MR2350
The RH-Plus MR2350 is a moisture analyzer designed to operate with the GE MDR3 relative humidity probe.
Calibration Systems
Humilab
The Humilab Humidity Control Chamber is a NIST traceable relative humidity calibration system.
HumiTrace
HumiTrace is the market-leading system for reliable and precise calibration of virtually any relativity humidity probe.
MG101
The MG101 hygrometer calibration system is used to generate precise, repeatable levels of water vapor in a carrier gas stream.
Sampling Systems
Sampling Systems
Sample handling systems are essential for getting top performance from your gas and moisture analyzer systems.
Moisture Probes
M Series
M Series moisture probes are coupled to Panametrics hygrometer consoles by an interconnecting cable.
TF Series
The three-function TF Series probe measures pressure and temperature, in addition to moisture content.
MIS Probe
This aluminum oxide moisture probe is designed to be used in conjunction with the MIS 1 analyzer, MIS 2 analyzer and PM880.
Software
PanaView
PanaView Instrument Interface software allows access to many product features from your computer.
Moisture.IQ Analyzer
Part of the IQ Series of moisture and oxygen analyzers from GE, the moisture.IQ is a multichannel, multifunction analyzer Each channel can accept: 1 Moisture input (MIS Probe or M Probe) 1 Temperature input (MIS Probe or M Probe) 1 Pressure input (MIS Probe) 1 Oxygen input (electrochemical sensor) 2 Auxiliary inputs
GAS MEASUREMENT
XMO2 Thermoparamagnetic Oxygen Transmitter
Measures oxygen from 0.01% to 100% in gases
The XMO2 transmitter is a compact, rugged, online transmitter that provides computer-enhanced, drift-free oxygen measurement.
APX Advanced Paramagnetic Oxygen Analyzer
Measures O2 from 0.1% to 25%
The APX advanced paramagnetic oxygen analyzer combines the benefits of the GE Panametrics XMO2 and TMO2
CGA351 Zirconium Oxide Oxygen Analyzer
Measures O2 from 0.1 ppm to 100%
Using an advanced zirconia sensor to measure Oxygen
The Series 351 zirconia oxygen analyzer monitors and controls any variable gas stream or atmosphere that is clean and dry including oxygen-enriched air feed to furnaces, combustivity index of blended fuel gases and oxygen content during heat bonding of plastics.
Delta F Series Oxygen Analyzers (very fast response)
Ranges are available from 0 ppm to 0.5 ppm to 100% (Minimum detectable change 3 ppb)
Using coulometric sensorthe ultimate in sensitivity.
The DF-300E family of oxygen analyzers provides access to accurate, sensitive and rapid oxygen analysis and flexibility across the broadest range of applications.
Oxy.IQ Galvanic Fuel Cell Oxygen Transmitter
Multi-range: 0-10 ppm to 100 ppm; 0 -50% O2
Proven galvanic fuel cell O2 sensor technology
TMO2D Display
The TMO2D is an optional display and control module that enhances the performance and
operation of transmitters such as the XMO2, XMTC or O2X1.
XMTC Thermal Conductivity Transmitter
Range: 0 100% The XMTC Thermal Conductivity Transmitter is suitable for thermal conductivity analysis of hydrogen and other gases. H2 in N2, air or CO2 He in N2 or air CO2 in N2 or air SO2 in air Argon in N2 or air H2/CO2/Air for hydrogen-cooled generators
