Date post: | 04-Jun-2018 |
Category: |
Documents |
Upload: | yuri-paruta |
View: | 224 times |
Download: | 0 times |
of 8
8/13/2019 Brochure Bombas Autocebantes
1/8
Experience In Motion
MPT Self-Priming, Solids-Handling Pump
Av. Colonial 5771 - CallaoCentral 464-0404 Email: [email protected]
www.unitec.pe
8/13/2019 Brochure Bombas Autocebantes
2/8
2
Dynamic Technologies Flowserve is without peer in the development andapplication of pump technology, including:
Hydraulic engineering Mechanical design Materials science Intelligent pumping Manufacturing technology
Broad Product Lines Flowserve offers a wide range of complementarypump types, from pre-engineered process pumps,to highly engineered and special purpose pumpsand systems. Pumps are built to recognized globalstandards and customer specifications.
Pump designs include: Single stage process Between bearing single stage Between bearing multistage Vertical Submersible motor Rotary Reciprocating Nuclear Specialty
Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the depth or breadth of expertise in thesuccessful application of pre-engineered, engineered and special purpose pumps and systems.
Pumping Solutions Flowserve is providing pumping solutions which permitcustomers to continuously improve productivity, profitabilityand pumping system reliability.
Market Focused Customer Support Product and industry specialists develop effective proposalsand solutions directed toward market and customer prefer-ences. They offer technical advice and assistance throughouteach stage of the product life cycle, beginning with the inquiry.
Pump Supplier To The World
8/13/2019 Brochure Bombas Autocebantes
3/8
3
Versatile and Reliable The Flowserve MPT is a proven self-priming, solids-handling pump. The result of a long and successfulassociation with leaders in the construction and wastewater industries, the MPTs simple design providesreliable, peak performance while offering versatility, easeof maintenance and low cost of ownership.
Advantages Over Submersible Pumps Dry mounting Higher temperature capability No sludge build-up on the motor Duty flexibility by changing pulley sizes Belt drive protection Blockages more easily removed Ease of maintenance
Applications Construction Utilities
Slurries Industrial waste Dirty water Drainage Dewatering Sewage Cannery waste
Benefits of the MPT Ease of Maintenance
Back pull-out design Belt drive protection Quick-disconnect clean-out Quick, external impeller adjustment Abrasion-resistant mechanical seal No special tools required Dual sight glasses Normal maintenance can be performed without
disconnecting piping Versatility
High-temperature capability Duty flexibility by changing drive pulley sizes Portability Dimensionally interchangeable with major
competitors Heavy-Duty Reliability
Generous wear allowance Oversized shaft Oversized bearings Solid one-piece flap valve Run-dry capability Oil lubricated double mechanical seal Hard-faced mechanical seals
Low Total Cost of Ownership Replaceable wear plate Reversible wear plate Reduced maintenance Externally adjustable clearances without shims
flowserve.com
MSX
Mark 3 Self-Priming
MF MPT Self-Priming,Solids-Handling Pump
Scale pits Sludge
Effluent Bilge pumping Mining Pulp and paper Food processing Automotive Wineries
Complementary Pump Designs Flowserve also offers these pump designs:
Mark 3 self-priming pump
MSX solids-handling, submersible pump MF and MN end-suction, solids-handling pumps CPXP ISO self-priming pump
8/13/2019 Brochure Bombas Autocebantes
4/8
8/13/2019 Brochure Bombas Autocebantes
5/8
5
Abrasion-Resistant,Double M echanical Seal
The MPT comes standard with an abrasion-resistant doublemechanical seal in an oil chamber. A hard-faced balancedrotary unit prevents liquid and grit from entering the sealchamber. Oil cools and lubricates the seal faces.
Replaceable Sea l Housing The MPT employs a replaceable seal housing to facilitatemaintenance without disturbing the piping. As partof the back pull-out design, the seal housing is positivelylocated, sealed and fastened to the bearing housing.
Bearings Bearings are oil-lubricated, heavy-duty single rowdeep groove and angular contact double row type forradial and thrust loads, respectively. A lip seal pro-tects bearings from dust, dirt and water. The bearinghousing is equipped with eyebolt, oil breather capand sight glasses.
Additional Fea tures Replaceable and reversible wear plate Extra large diameter shaft Solid one-piece flap valve Back pull-out design 431 SS shaft standard on all models
flowserve.com
Double Mechanical Seal Quick Disconnect Cover Plate
8/13/2019 Brochure Bombas Autocebantes
6/8
8/13/2019 Brochure Bombas Autocebantes
7/8
7
Service Dedication Flowserve Engineered Services focus on providing customerswith uncompromising service and support, where and whenneeded. Dedicated to delivering the highest quality support,Engineered Services integrate pump and materials engineeringknowledge with creative service solutions.
A worldwide network of service and repair centers staffed byhighly skilled engineers and technicians is available aroundthe clock, seven days a week to respond to customer queries,
to evaluate and troubleshoot problems and to providereliable solutions.
Strength of Experience,Commi tment to Excellence Flowserve has long served industries requiring superiorequipment performance and service life.
Oil and gas production Hydrocarbon processing Chemical processing Water resources
Power generation Nuclear Mining and mineral processing Pulp and paper General industry
Flowserve is dedicated to maximizing equipmentperformance and providing reliability- centeredmaintenance programs for pumps and relatedequipment, regardless of manufacturer. Using theFlowStar.net asset management software, Flowserveengineers and technicians track performance andsupport improve ment programs using a service lifecycle cost business approach. The results are
improved reliability and increased profitability.
Business PartnerFlowserve partners with customers to respond tothe dynamic business conditions that affect them.Flowserve will work with customers to drive efficiency,maximize throughput and control process quality.Whether user needs involve on-site technicalassistance or broader project planning with fullturnkey responsibility, Flowserve EngineeredServices will deliver professional, reliable results.
flowserve.com
Global Service and Technical Support
8/13/2019 Brochure Bombas Autocebantes
8/8
flowserve.com
USA and CanadaFlowserve Corporation5215 North OConnor Blvd.Suite 2300Irving, Texas 75039-5421 USA
Telephone: 1 972 443 6500 Telefax: 1 972 443 6800
Europe, Middle East, AfricaFlowserve CorporationVia Rossini 90/9220033 Desio (Milan), Italy
Telephone: 39 0362 6121 Telefax: 39 0362 303396
Latin America and CaribbeanFlowserve Corporation6840 Wynnwood LaneHouston, Texas 77008 USA
Telephone: 1 713 803 4434 Telefax: 1 713 803 4497
Asia PacificFlowserve Pte. Ltd.200 Pandan Loop #06-03/04Pantech 21Singapore 128388
Telephone: 65 6775 3003 Telefax: 65 6779 4607
Bulletin PS-10- 9a (E/A4)Printed in USA. March 2007. Flowserve Corporation
To find your local Flowserve representative:
For more information about Flowserve Corporation,visit www.flowserve.com or call USA 1 800 728 PUMP (7867)
Av. Colonial 5771 - CallaoCentral 464-0404 Email: [email protected]
www.unitec.pe