Date post: | 15-Mar-2016 |
Category: |
Documents |
Upload: | techmek-srl |
View: | 212 times |
Download: | 0 times |
A U T O M A T I C M A C H I N E S
i-pile Feeder for spreader
i-pile is an automatic feeder of containers piles for destackers.
It is a valid solution for those plants that work with a large amount of containers to be processed; in fact, it considerably redu-ces the need for the operator to control the plant or the machine as well as the feeding of the piles.
The operator loads the empty container pi-les onto the belt which serves as a deposit.As the destacker finishes the containers, the piles move forward to feed it.
An electronic control supported by a de-dicated software allows the connection of i-pile to almost any destacker currently on the market.
The belt-deposit size can be customised according to customers’ needs.
A U T O M A T I C M A C H I N E S
Techmek S.r.l. via Spineda, 16 - 31040 Volpago del Montello (TV) ITALY Tel. +39.0423.24439 Fax +39.0423.615032 [email protected] - www.techmek.it
Administrative Center - Via Anassilide, 148 31044 Montebelluna (TV) ITALY
Feeder for spreader
i-pileThe feeder can be customised for:• Pileheight.• Numberofpiles.• Loadheightfromtheground.• Destackertypeandbrand.
technical specifications
- standard loading capacity:
up to 6 piles of containers
- speed:
1 pile every 15 seconds
- max. container size:
up to a 500 x 700 mm
- standard machine overall size:
828 x 4,418 x 1,314 mm
- power / - installed power:
400V - 50hZ, 3phase + neutral / 0,4 kW
- pneumatic system:
6 bar
- pile loading mode:
manual standard
automatic optional
- control:
PLCwithoperatingpanel