Brockton Furnace
& Duct Dist., Inc.
54 Bodwell St.• Avon, MA, 02322 • 508-580-4560 • Fax: 508-587-9799
Get More…..
Spend Less….
•Main Office: 508-580-4560
•Toll Free: 800-938-HVAC
•Office Fax: 508-587-9799
•Shop Fax: 508-584-1821
•Store Fax: 508-559-0052
Business Hours
Monday-Friday 7-5pm (Shop & Store)
Saturdays 8-12 (Store Only)
Visit Our Website! www.brockton-furnace.com
Brockton Furnace & Duct Dist., Inc. was founded in 1983.
We have been serving HVAC/R contractors throughout the
Boston and South Shore area for over 30 years and will
continue to provide the very best products and service
available. Our friendly, efficient, and knowledgeable staff
are always ready to serve you!
Meet Our Team!
Nancy Colarusso CEO/ Owner 508-580-4560
Joseph White Operations Manager [email protected]
John Jamieson Sales Manager [email protected]
Ed Major Shop Manager [email protected]
Bryan Adams Shop Supervisor [email protected]
Anthony Froio Shop Office Manager [email protected]
Russell Minnehan Sales [email protected]
Wayne MacKinnon Counter Sales [email protected]
Carl Cayford Counter Sales [email protected]
Kathy Dulong Credit Manager [email protected]
Stella Constantine Purchasing/Special
Orders [email protected]
Stephenie Kelley Reception [email protected]
Table Of Contents
1
BF&D Manufactured Products Stock Duct, Spiral Pipe & Fittings, Custom 2-3
Goodman Equipment Furnaces, Air Handler, Condensers, etc 4-8
HC-Products Adjustable Elbows, Pipes, Fittings, etc. 9-12
Continental Registers Drop-ins, Floor Grilles, Filter Grilles, etc. 13
RECTORSEAL Fortress & Accessories 14
BRAMEC PVC, Silicone, etc. 15-17
Purolator, Carlisle, Aero-Flo Air filters, Sealant, Booster Fan 18
American Metals, ERICO, MetalFab Registers, Hangers, Clips 19
Diversitech Electrical Components, Wire Ties, etc. 20-21
Don Park B-Vent 22
DuroDyne, Field Controls, Continental Fan Tools, Power Venters, Back Draft Damper,
etc. 23
EWC Controls Control Panels, Dampers, etc 24
FAMCO, Trion, Galeton, Global, Youngtown Dryer vents, Air Bear, Gloves, Capacitors 25
Heat Controller (Comfort-Aire) Equipment 26
Robertshaw, JMF, JW Harris TSTAT’s, Solder, Line Sets 27
Lenox Tools, etc. 28
Malco Tools, etc. 29-30
Little Giant, Mars, Aeroflow Condensate Pumps, Conduit, Insul-Tube 31
Northern Tool, Old Castle, Quiet flex, Plastics R
Unique
Sub Pumps, Pads, Flexible Duct 32
Resource Conservation, Yellow Jacket Float Switches, Refrigeration Gauges, etc. 33
Newman's, Honeywell, R Foil Rod, Relays, Bubble Wrap, etc. 34
Mueller, Skuttle, SPI Copper/PVC Fittings, Humidifiers, Foil Wrap 35
Miscellaneous Miscellaneous Venders 36-37
Description Page Venders
*some products may be available through special orders only. Please call for details.
2
Stocked Products
Spiral Pipe
Spiral Fittings
• Elbows, Reducers
• Caps and Couplings
• Sizes 4-24”
• All fittings made small end
• Stitch Welded
• 26-24ga
• 10’ lengths
• Sizes 4-36”
• Made in 26-22ga
Stock Fittings
• Elbows, Tapers, Caps
• Plenums, Start Collars, etc.
• 1 ¼ bar slips
• All 26ga
Stock Duct
• Standard 45” length
• 1¼ bar slips formed on duct
• All 26ga
• Wrapped or L-Shape depending
on the size
Telephone: 508-580-4560 • Shop Fax: 508-584-1821
3
Custom Fabrication
• Available in various sizes
• Elbows, offsets, reducers,
tees,
Taps, etc. Per customer
specifications
• Various materials available
(please call for info)
• Insulated upon request
• Duct, Elbows, offsets,
reducers, tees, etc. Per
customer specifications
• 16 gauge material
• Round Pipe & Fittings
• Residential and Commercial
sizes
• Fittings made per Customers
Specifications
• TDC, S+D, or Slip
Connections
• Duct Lining
Welded Grease Duct
Custom Duct
Custom Spiral
All Custom Duct is made to Order. Call for Details
Telephone: 508-580-4560 • Shop Fax: 508-584-1821
•Direct-Drive, Multi-Speed
Motor
•Suitable for Horizontal, Up
flow and Down flow
installations
•Compatible with Heat Pump
and Variable-Capacity
Cooling Units
•1.5 - 5.0 ton
•Direct-Drive, Multi-Speed
Motor
•Compatible with Heat Pumps
and Variable-Capacity Cooling
Units
•1.5 – 2.0 ton
•Available to order
•Direct-Drive, Multi-
Speed Motor Allows
Air Volume Variation
for Heating and
Cooling Applications
•Thermoplastic Drain
Pan
•1.5 – 2.0 ton
•Available to order
•Draw-Thru Centrifugal Blower is
Belt Driven for Quiet, Efficient
Operation
•Electric Heat Kits are Field-
Installed Options
•Suitable for Horizontal, Up flow and
Down flow installations
•7.5 ton
ARPF Series
AR Commercial Series
•Low CFM for efficient fan-only
operation
•Up to 14 airflow settings for optimized
CFM
•Improved Humidity Control and
Comfort
•Compatible with Heat Pumps and
Variable-Capacity Cooling Units
•1.5 – 3.5 ton
•Available to order
AEPF Series
AWUF Series
•Energy-saving, fixed-speed motor
•Multi-position - up flow, down flow, or
horizontal installations
•Improved Humidity Control and
Comfort
•Compatible with Heat Pump and
Cooling Units
•1.5 – 5 ton
•Available to order
ASPF Series
ADPF Series
4
Office: 508-580-4560 • Fax: 508-587-9799
ARUF Series
•Direct-Drive, Multi-Speed Motor
•Heating and Cooling
Applications
•Suitable for Horizontal, Up flow
and Down flow installations
•1.5 – 5 ton
Packaged Gas/Electric Units
•R-410A Chlorine-free Refrigerant
•Tuft Tube tubular heat exchanger
•Copper tube/ Aluminum fin coils
•High capacity, steel-cased filter
dryer
•4 – 12.5 ton
GPC13H Packaged Air
Conditioner Units
•Energy-Efficient
Compressor with Internal
Relief Valve
•Available in R-410A or R-22
Refrigerants
•Heavy-Gauge Galvanized-
Steel Cabinet
•Louvered Condenser Coil
Protection
•PSC Blower Motor
•2 – 5 ton
GPG13/GPG13M Packaged
Gas/Electric Units
•Chlorine-Free R-410A Refrigerant for GPG13M
•EEM Blower Motor
•Durable, corrosion-resistant aluminized-steel tubular
heat exchanger
•Direct spark ignition system
•Self-Diagnostic Blower
•R-22 Refrigerant for GPG13
•2 – 5 ton, various BTU’s
Office: 508-580-4560 • Fax: 508-587-9799
GPH13H Packaged Heat
Pumps
•Energy-efficient compressor with
internal relief valve
•Available with R-410A or R-22
systems
•Quiet horizontal discharge
•Copper tube/aluminum fin coil
•Totally enclosed, permanently
lubricated condenser fan motor
•2 – 5 ton, 13 Seer
•Available to Order
•Multi-Speed Blower – motor
speed is easily changed
•Control board includes a fan
delay in cooling mode and is
isolated from the air stream
•For cooling or Heat Pump
units: up flow, down flow, and
horizontal applications
MBE/MBR Modular Blowers
•Controlled by sequencers for
better temperature control
•Multiple branch circuit
capability
•Completely assembled and
tested
HKR Series Electric Heat Kits
•R-410A Chlorine-free Refrigerant
•12,000 to 24,000 BTU/h
•Auto Start
•Remote Control
•Easy-to-Clean Air Filter
•1 – 2 ton
•Available to Order
MSG Mini-Splits
5
6
DSZC18 Heat Pumps
•Comfort Net™
Communications System
compatible
•R-410A chlorine-free
refrigerant
•Two-Stage Copeland®
UltraTech Scroll
compressor
•Expanded Comfort Alert
diagnostics built in
•3 – 5 ton
•Available to Order
•R-410A chlorine-free refrigerant
•Energy-efficient scroll
compressor
•Low-pressure switch
•Liquid refrigerant return
protection
•Factory-installed, bi-flow liquid
line filter dryer
•1 – 5 ton
•Available to Order
GSZ13 Commercial Heat
Pumps
SSZ14/SSZ16 Heat Pumps
•R-410A chlorine-free
refrigerant
•High-Efficiency Scroll
Compressor
•14 seer/16 seer
•1 – 5 ton
Office: 508-580-4560 • Fax: 508-587-9799
•Rust-Resistant, Thermoplastic
Drain Pans
•Coil Painted Architectural Gray
•Rifled Copper Tubing and
Corrugated Aluminum Fin Coil
Construction
•1.5 – 5 ton, multiple sizes
Uncased Coils
•Rust-resistant, thermoplastic drain
pans
•AHRI certified; ETL listed
•Rifled tubing and corrugated
aluminum fin coil construction
•1.5 – 5 ton, multiple sizes
CHPF Painted Coils
•Rust-Resistant, Thermoplastic
Drain Pans
•Coil Painted Architectural Gray
•Rifled Copper Tubing and
Corrugated Aluminum Fin Coil
Construction
•2 – 5 ton, multiple sizes
Cased Coils
7
GMVC95 Gas Furnace
•Up to 95% AFUE
Performance
•Multi-Position Installation
•Two-Stage, Variable-Speed
Up to 80%, Multi-Position
Installation
•Single-Stage, Multi-Speed
GMS8 Gas Furnace
GMH8 Gas Furnace
•Up to 80% AFUE
•Multi-Position Installation
•Dual-Saver (Convertible),
Multi-Speed
•Available to Order
•Up to 92.1% AFUE
Performance
•Up flow / Horizontal
Installation
•Single-Stage, Multi-
Speed
GKS9 Gas Furnace
Office: 508-580-4560 • Fax: 508-587-9799
•Up to 95% AFUE
Performance
•Multi-Position
Installation
•Dual$aver (Convertible),
Multi-Speed
GMH95 Gas Furnace
GCH9 Gas Furnace
•Up to 93% AFUE
Performance
•Multi-Position
Installation
•Dual$aver
(Convertible), Multi-
Speed
8
GHS8 Gas Furnace
•Up to 80% AFUE
Performance
•Multi-Position
Installation
•Single-Stage, Multi-
Speed
High Airflow
•Up to 80% AFUE
Performance
•Down flow
Installation
•Single-Stage, Multi-
Speed
GDS8 Gas Furnace
VSC13 Heat Pumps
•R-410A refrigerant
charged for 15’ of
refrigerant lines
•High-Efficiency Scroll
Compressor
•1.5 – 5 ton
Office: 508-580-4560 • Fax: 508-587-9799
We also stock Goodman
parts, Please call for details.
VSX13 Condenser
•R-410A chlorine-free
refrigerant
•High-efficiency scroll
compressor
•Factory-installed liquid line
filter dryer
•Copper tube/aluminum fin coil
•1 – 5 ton
SSZ14/SSZ16 Condenser
•R-410A chlorine-free
refrigerant
•High-Efficiency Scroll
Compressor
•14 seer/16 seer
•1.5 – 5 ton
•R-410A chlorine-free
refrigerant
•High-efficiency scroll
compressor
•Factory-installed liquid line
filter dryer
•Copper tube/aluminum fin coil
•1 – 5 ton
GSX13 Condenser
9
Office: 508-580-4560 • Fax: 508-587-9799
90° Elbows •Sizes 3 – 20”
•Various gauges
45° Elbows •Sizes 3 – 18”
•Various gauges
Snap-lock Pipe •Sizes 4 – 20”
•Various lengths
Reducers •Sizes 4-3 to 20-18
Tees •Sizes 4 – 18”
Rain Caps •Sizes 4 – 12”
Tee Cap •Sizes 3 – 16”
Start Collars •Sizes 3 – 20”
Top Ceiling Box •Sizes 6x6x6 – 14x14x10
Top Take-Off •Sizes 4 – 8”
With Damper •Sizes 6 – 8”
With Damper •Sizes 4 – 10”
10
Office: 508-580-4560 • Fax: 508-587-9799
End Boots •Sizes 2x10x4 – 6x14x8
End caps •Sizes 8x8 – 24x24
Boxes •Sizes 6x6 – 14x14
Panning/ Bay Caps •Cap Sizes 8-10”
•Panning - 16 1/2x30
Cold Air Elbows •Sizes 820/1620 – 1220/1620
Flat Hangers •60” long
Straight Boots •Sizes 2x10x4 – 8x12x8
Angle Boots •Sizes 2x10x4 – 6x14x8
Airtite w/ Damper •Sizes 4 – 18”
Airtite (Plain) •Sizes 4 – 20”
Airtite Saddle •Sizes 4 – 12”
With Damper •Sizes 4 – 12”
11
Office: 508-580-4560 • Fax: 508-587-9799
Double Take-off •Sizes 6 – 7”
Oval Pipe •Sizes 5 - 8”
Oval Start Collar •Sizes 6 - 8”
Oval 90° Elbow
Flat •Sizes 5 - 8”
Oval 45° Elbow
Flat •Sizes 5 - 8”
Oval to Rnd 90° Sizes 5x5 – 8x8
Oval to Rnd End Boot •Sizes 6 – 8”
Oval to Rnd Straight Boot •Sizes 4 – 10”
Oval 45° Elbow
Vert. •Sizes 5 - 8”
Oval 90° Elbow
Vert. •Sizes 5 - 8”
12
Office: 508-580-4560 • Fax: 508-587-9799
Vinyl Hose •Sizes 3 – 4” x 50’
Aluminum Wall Cap •Sizes 3 1/4x10
Aluminum Roof Cap •Sizes up to 7”
Aluminum Flex Duct •Sizes 6 - 8” x 96”
Drain Pans •Sizes 14X20 – 32X60
Damper •Sizes 4 – 10”
Dbl. End Stack Head •Sizes 6x12x7 & 6x14x8
Side Ceiling Box •Sizes 6x6x6 – 12x12x10
Oval Stack Head •Sizes 6x10x5 – 6x14x8
Wyes •Sizes 4x4x4 – 8x8x8
Plenums w/ 2 Caps •Sizes 13x20x24 – 22x24x20
Sleeves w/ 1 Cap •Sizes 14x20x12 – 30x30x12
Office: 508-580-4560 • Fax: 508-587-9799
13
Floor Grilles (Brown)
•White/Brown
•Bar-Faced
•Extremely Rigid
•Firm, Smooth Surface
Toe Space Grilles
•White/Brown
•Rolled Face
•Mounting Holes
Filter Grilles
•1/2" Spaced Fins
•Lanced Face
•Uses Standard 1" Filter
(Not Included)
Return Air Grilles
•1/2" Spaced Fins
•Lanced Face
•White Finish Floor Register
•Brown/White
•Opposed Blade Damper
•Rolled Face
Supply Ceiling Diffusers
•Sidewall/Ceiling
•Single Deflection-Steel Frame
•Multi-Shutter Damper
T-Bar Diffusers
•Without Insulation
•3 Tier Diffuser
•Provides High Volume of Air
Delivery
Ceiling
Diffusers/Dampers
Ceiling Registers
•Sidewall/Ceiling
•1/2" Spaced Fins
•Lanced Face
•Multi-Shutter Damper
14
Office: 508-580-4560 • Fax: 508-587-9799
MV2/S MV3/S
MV360/S MVE/S
4 WAY GRILLE/DAMPER/BOX
3 WAY GRILLE/DAMPER/BOX
MV4/S
ROUND GRILLE/DAMPER/BOX
2 WAY GRILLE/DAMPER/BOX
RETURN/EXHAUST GRILLE/DAMPER/BOX
MXE/S
RETURN/EXHAUST GRILLE/BOX/ NO DAMPER
Drop Ceiling
Support Flange
SC 90° Flat Elbow
Fortress 8’ SC 90° Vert. Elbow
SC Wall Inlet SC Soft Inlet
SC End Fitting SC Coupler
15
Office: 508-580-4560 • Fax: 508-587-9799
PVC Female
Adapter PVC Male
Adapter
PVC Cap Drain Pan
Fitting
PVC 45°
Elbow PVC 90°
Elbow
Pipe Cutter
Dust Masks
Egg Crate
•White polystyrene
•1/2" open cell grid
Wire Nuts •Various colors
Foam Sealant
•Triple expanding
•Weatherproofs against wind &
moisture
PVC Tee
Pipe Strap
100ft.
Roof Flashing
Pipe Cement Cable Clamps
PVC Cleaner •Cleaner removes surface
dirt, grease & grime
Cool Gel
•Protects Heat Sensitive
Components when Brazing/
Soldering
Office: 508-580-4560 • Fax: 508-587-9799
16
Hose Clamp
Leak Detector •High visibility, fluorescent
color shows brightly
A/C
Disconnect
Condensate
Traps
Anti-Vibration
Pads
Primer •Removes surface dirt,
grease & grime
17
Office: 508-580-4560 • Fax: 508-587-9799
Fuses •32 Volt
Trouble
Lights
Nails
Nylon Plug Keyhole Saw
Silicone •Aluminum/Clear
Smoke
Bombs
Tensioning
Tool
Vinyl
Tubing
Vise
Grips Wipes
Hanging
Wire
Office: 508-580-4560 • Fax: 508-587-9799
18
Air Filters •Space Saving Notched Frame
•Fast & Easy Installation
•Sizes 10x10 – 30x30
•Some sizes available in 2”
thickness
Filter Media •Rigid, Self Supportive
•No Frame Needed
•Washable
•1” Thickness x 30” wide
Duct Seal 321 •All Purpose Industrial Grade
•Non-Toxic Water Based
Product is Solvent Free
Tape 1403-181BFX •Duct joint and general purpose rolled
sealant
•Instant water resistant grip to most
surfaces
•Transfers heat thru-wall to adjoining
room.
•Transfers excess heat, through ceiling
duct, to another room.
Booster Fan
19
Office: 508-580-4560 • Fax: 508-587-9799
2-Way Register
4-Way Register
3-Way Register
•Used in sidewall/ceiling
installations
•Face mounted
•Used in sidewall/ceiling
installations
•Face mounted
•Used in sidewall/ceiling
installations
•Face mounted
•Increases installation versatility
by allowing objects to be hung
at an angle
•Minimizes vibration and
system wear and tear with a
strong, yet flexible wire rope
Spiral Hangers
•Supports pipe or duct from
flange with banding or
strapping
Parallel Hangers
Perpendicular Hangers
•Supports pipe or duct from
flange with banding or
strapping
20
Office: 508-580-4560 • Fax: 508-587-9799
Timer Break on
Delay
Coil Cleaner
Sight Glass Hard Start Kit
Drain Gun
Pro-Flush/Kit
Valve Core
Swoosh
Spade Terminal
Adapters
Disconnect
Insulated
Nylon Cable
Clamps
21
Office: 508-580-4560 • Fax: 508-587-9799
Styrofoam Block
Sheet metal
Screws
Female
Disconnect
Wire Tires
Hi Temp Flag
Disconnect
Flood Detector
Block Stand
Vibration Pads
Spout Oiler
Vacuum Pump
Oil
Access Fitting
Office: 508-580-4560 • Fax: 508-587-9799
22
BVENT 45°
Elbow
BVENT 90°
Elbow
BVENT Tee
Tee Cap Draft Hood Conn.
BVENT Increaser
BVENT Adj. Pipe BVENT Pipe
Storm Collar Adj. Flashing
Rain Caps
23
Spray Adhesive
Stick Pins
Pin Rivets
Various Snips
Brushes
Rapit Regulators
Power Venter • 100% negative pressure in the
vent pipe for maximum safety.
• Standard galvanized pipe can be
used instead of expensive
stainless steel.
Draft Controls
•Hinged cover for easy
accessibility
•Includes patent pending angle
bracket and duct board mounting
kit
Air Purifying System
Back Draft Dampers
•Neoprene damper seal minimizes leakage
•20 gauge steel housing, aluminum spring loaded
butterfly damper blades
Arrow Stapler
Steam Humidifier •Computer Watchdog
Circuit
•Automatic
Drain/Flush System
•Automatic
Maintenance Mode
Office: 508-580-4560 • Fax: 508-587-9799
24
• Heavy Duty Frame
• Nylon Bushings for Quieter
Operation
• Revolutionary Motor with
greater Reliability
Motorized Dampers
BM Plus 5000 Control Panels
•Automatic changeover
•Opposite system
service
•Short cycle timers
•Supply air sensing
capability
NCM 300 Control Panels
•single bladed, Steel
•barometric damper
Pressure Regulated
Dampers
Motorized Round
Dampers
Steam Humidifier
•Computer Watchdog
Circuit
•Automatic
Drain/Flush System
•Automatic
Maintenance Mode
•Unsurpassed single
stage, two stage
•Dual fuel and heat
pump compatible
control panel for zoning
up to seven zones
•A single blade round
damper
•two position, 24 volt motor
•Used for models ND, EBD, URD,
and RDN dampers
•Kit comes complete with all
necessary brackets and screws.
Motor Replacement Kit Transformer 40VA
•Plate mounted 24V 40VA
transformer for use with
ULTRA-ZONE dampers
and control systems.
Office: 508-580-4560 • Fax: 508-587-9799
25
Wall Caps Dryer Vents
Air Bear Air Cleaners
and Purifiers
Gloves and Safety Glasses
Global Turbo
200 Capacitors
Kevlar Tradesman
26
Office: 508-580-4560 • Fax: 508-587-9799
Patriot 80 Oil
Furnaces
•Up flow, Down
flow/Horizontal, Rear Flue and
Front Flue Versions, Models
Come in Heat Only and
Heating Cooling
Combinations.
Mini-Split Systems
Multi-Zone Mini-
Split Systems
•Dual and Tri-zone Systems
•All sizes are available in cooling
only and heat pump models
•Available to Order
•The single zone "S" Series
comes in cooling only and
heat pump models, from 9,000
to 24,000 BTUH.
•Available to Order
•Units are multi-positional:
they can be installed vertical
or horizontally left or right.
•R-410A
•Variable Speed Models
Available to Order
Hydronic Air
Handlers
Condenser
Split System
•The condenser coil provides
maximum surface area for heat
exchange, while a full metal
jacket protects the coil.
•Available to Order
Parts Available! See Store
For Details!
27
Stay Silv 15
Solder 95/5 Stay Clean
Flux
Stay Brite
Solder
Copper Line-Sets
Dynaflow
Non-Programmable TSTAT Programmable TSTAT
• Adjustable temperature differential
• Filter monitoring
• Quick wire terminal block
Adjustable temperature differential
Filter monitoring
Quick wire terminal block
5 – 2 day programming
Office: 508-580-4560 • Fax: 508-587-9799
28
Office: 508-580-4560 • Fax: 508-587-9799
All-In-One
Screw Driver
Saw Blades
Crimpers
Shank Extension
Snap Lock Pliers
Flanging Pliers
Various Snips
Hole Saw
Wood Boring
Bit
Arbor Tool
29
Office: 508-580-4560 • Fax: 508-587-9799
Utility Knife
Snap Lock
Punch
Pipe Crimper
Step Drill
Swaging
Tool Various Snips
Hand
Notcher Awl
Turbo Shear
Hammer
Screw
Driver
Duct Knife
Screws
30
Office: 508-580-4560 • Fax: 508-587-9799
Folding Tool
Divider
Caulk Gun
Rivet Gun
Tape Measure
Duct
Stretcher
Flex Duct
Cutter
Hole Cutter
Hole Punch
Kit
Linesman's
Pliers
Vent Saw
Hex Chuck
Driver
Pliers
Ratchet
Wrench
Hex Key
Wrench
Office: 508-580-4560 • Fax: 508-587-9799
VCC Condensate Pump
•115 volt
•Low profile for limited
space applications
•1/30 HP motor
•ABS tank, motor cover,
and volute
•3/10 gallon tank capacity
VCMA Condensate Pump
•115 Volt
•1/50 HP high performance
motor
•1/2 gallon tank capacity
•Removable 3/8” barbed
check valve
•3 inlet drain holes
•Safety switch
Conduit & Whips TSTAT Wire
Insul-Tube
31
32
Submersible Pumps
Eco Pads
Plastic Pads
Office: 508-580-4560 • Fax: 508-587-9799
Insulated Flex Duct Uninsulated Flex Duct
33
• easy to install. • Installation does not require
a drain hole. • 5 amp high-capacity sensor
designed for metal pans.
Aqua Guard AG-1200
• For metal and lower-end non-Aqua Guard plastic drain pans.
• 5 amp high-capacity sensor designed for metal pans.
• Easy, no-drill installation.
Aqua Guard AG-1100
Aqua Guard AG-3180E
• The perfect solution for commercial package units.
• 6' of control wire and 6' of probe lead wire
• 2 in 1 primary pan + secondary pan sensor.
• 5 amp solid-state water sensor for auxiliary drains
• Water detection LED and automatic reset
Aqua Guard AG-3150
Various Hoses Test & Charging Manifold
Gauge Coupler Magnify Mirror
Office: 508-580-4560 • Fax: 508-587-9799
34
Office: 508-580-4560 • Fax: 508-587-9799
Thermocouples
Gas Valve
Relays
Round TSTAT
Threaded Rod
Unistrut
Galvanized
Clips
Bubble Wrap
Office: 508-580-4560 • Fax: 508-587-9799
35
PVC Fittings Copper Fittings
Flow Thru
Humidifiers Spray
Humidifier
Flush Timer Motor
Foil Wrap
Office: 508-580-4560 • Fax: 508-587-9799
36
Panning
Stapling Pliers
Tie Straps
PVC
Tubing
Copper
Tubing
Various Tapes
Office: 508-580-4560 • Fax: 508-587-9799
37
Plastic Boxes
Blocks
All Fuel Pipe
R410A Freon
Cement
R22 Freon