Date post: | 29-Apr-2018 |
Category: |
Documents |
Upload: | truongphuc |
View: | 224 times |
Download: | 2 times |
Bronze & Brass ValvesJIS 5K/10K, ASME Class 125/150/300, KITZ Type 100/125/150/300/400/600
Presenting Design Features ofKITZ Bronze/Brass Valves
01
As a world leading manufacturer of general service valves, KITZ Corporation is glad to present you a broad range of our KITZ bronze/brass valves for your commercial and industrial applications.
KITZ bronze/brass valves are produced in modern factories used exclusively for valve manufacturing. Each phase of the manufacturing process, from selection of raw materials to casting, forging, machining, assembly and testing, has been improved with automated production facilities and unparalleled production technology. Standardization and automation yield KITZ bronze/brass valves of superior quality and higher uniformity at competitive prices supported by incomparably prompt delivery.
KITZ bronze/brass valves are all designed by the state-of-the-art computors, built by automation and inspected by the people who care the quality.
Human Engineering in Handwheel DesignComputer designed handwheels of all KITZ bronze/brass valves, the product of KITZ human engineering, are featured with an ideal combination of an operational efficiency and high mechanical strength for reliability.
Asbestos-free Gland PackingsAll KITZ bronze/brass gate and globe valves employ Aramid Fiber PTFE as the material of asbestos-free gland packing, meeting the latest industrial demand to minimize pollutional concerns. With its leak-free sealing performance and reduced valve operating torque, Aramid Fiber PTFE is considered a reliable substitution for conventional asbestos sheet for service of water, oil, gas and saturated steam pressure of maximum 300psi within the temperature range up to 300°C.
Pressure RatingThe pressure rating designation of KITZ valves follows the accepted practice of the valve and pipe fitting industry today. Each product is rated for W.O.G. (Non-shock cold water, oil, and gas*) and Saturated steam pressure service.
Inspection and TestingKITZ valves are manufactured under strict quality control throughout all stages of production, beginning with inspection of chemical composition and mechanical properties of materials. Extra care is given to inspection and testing at all machine shops and assembly plants, utilizing up-to-date precision equipment. All KITZ valves are subjected to strict pressure testing of body and seat sealing to assure long-life service and quality performance.
*The valves introduced in this catalog are not designed to handle toxic gases. Use specially designed or certified valves for flammable gas service.
This catalog use MPa, a SI unit, for indication of pressures. For readers' convenience, however psi is also used for ASME and JIS related products respectively.The products introduced in this catalog are all covered by the ISO 9001 Certification.
KITZ Corporation, Nagasaka Plant, Japan (ISO 9001) KITZ (Thailand) Ltd, Bangkok Plant, Thailand (ISO 9002)
C3TM
TM
TK AKTK TKT
TKW
TF
TFJ
TL TLT
CTLTU
CTL
TLTU
AK3TM
ZO
ZS
ZET
AKSZA
SZA
CSZA
CSZAWAKSZAW
TN AKTN CTN
T4LT4T AKT4T
CTNPAKTNP
Ball valves 40040040060060040040040040010K600600400600600600600400400400
BallBallBallBallBall
Full bore BallFull bore Ball
BallBallBallBall
Full bore BallBall
Full bore BallFull bore BallFull bore BallFull bore Ball
3-Way Ball3-Way Ball3-Way Ball
BrassBrassBrassBrassBrassBrassBrass
BronzeBronzeBronzeBrassBrassBrassBrassBrassBrassBrassBrass
BronzeBrass
ThreadedThreaded(F&M)
ThreadedThreadedThreadedThreadedThreaded
Threaded/SolderedThreaded/Union T/S
FlangedThreaded/Soldered
Threaded(F&M)ThreadedThreadedThreaded
Threaded/SolderedThreaded
Threaded/SolderedThreaded
Threaded/Soldered
2828292929303030313131323232333333343434
NAH
NSH
INAH
INSH
RAH
RSH
CNAH
CNSH
CRAH
CRSH
RTRM
RTRO
RTRR
RTRU
Fancoil valves 20020020020020020020020020020010K10K10K10K
AngleStraightAngle
StraightAngle
StraightAngle
StraightAngle
StraightBallBallBallBall
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronze
ThreadedThreadedThreadedThreadedThreadedThreaded
Threaded-SolderedThreaded-SolderedThreaded-SolderedThreaded-Soldered
ThreadedThreaded(F&M) Threaded(F&M) Threaded/Union
TGGas Service valves Ball Brass Threaded 36
AKTAF
CTAF
AKTFLL CTFLL
CTAFM
CTAFD
CTAFC
AKTAFM
AKTAFP
AKTAFPM
AKTAFD
AKTAFC
AKTAFO
AKTAFU
AKTAFS
TH
T
CTH
AKT TT
TO
Ball valves 600600600600600600600600600600200
400/600
Full bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore Ball
Ball
BrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrass
ThreadedSoldered
Threaded/SolderedThreaded/Soldered
ThreadedThreaded
Threaded/SolderedThreaded/Soldered
Threaded(M&F) Threaded/Union
ThreadedThreaded/Soldered
242424252525262626272728
A AKA
Q QA
C AKC
CA AKCA
B BH
G AKG
D
DB DBH
FR AKFS CFS
FH AKFH CFH
H AKH CH
E
EB EBH
F AKF
R AKR CR
RF AKAF CAF
VF
FT&FTS
Y AKY CY
YR
FV
CONTENTS
02 03
Tite Fig Class Type PageBody Material End Connection Tite Fig Class Type PageBody Material End Connection
KITZ Standardgate, globe, check,angle & butterfly valves,Y-pattern strainers.
100
150150150125150150125125125125150150150125125150(5K)(5K)
150175
GlobeGlobeGlobeAngleGlobeGlobeGlobeGlobeGateGateGateGateGateGate
Lift CheckSwing CheckSwing Check
Lift CheckLift Check
FootStrainerButterfly
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBrassBrass
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronze
ThreadedThreadedThreadedThreadedFlanged
ThreadedThreadedFlanged
Threaded/SolderedThreaded/SolderedThreaded/Soldered
ThreadedThreadedFlanged
ThreadedThreaded/Soldered
ThreadedThreaded/Soldered
ThreadedThreaded
Threaded/SolderedThreaded
666777888999
10101011111112121213
AK125M C125M
AK125E C125E
S
AK150E
AK150L C150L
AK150LU
AK300LU
C150LU
AK125C C125C
AK150D
AK300D
AK300J
C150D
AKYR CYR
AK150YR C150YR
AK300YR
AS-FH
Industrialgate, globe & Check valves
125125150150150300125150300300125150300
PN16
GateGateGateGateGateGateGlobeGlobeGlobeGlobe
Swing CheckSwing CheckSwing Check
Gate
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBrass
Threaded/SolderedThreaded/Soldered
ThreadedThreaded/SolderedThreaded/Soldered
ThreadedThreaded/SolderedThreaded/Soldered
ThreadedThreaded
Threaded/SolderedThreaded/Soldered
ThreadedThreaded
1818181919192020202121212222
J
JB
M
L
LB
O
OB
10BW
JIS Standardgate, globe & Check valves
10K10K5K10K10K10K10K10K
GlobeGlobeGateGateGate
Swing CheckSwing CheckWafer Check
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronze
ThreadedFlanged
ThreadedThreadedFlanged
ThreadedFlangedWafer
1414141515151616
3838383939394040404142424243
S1
S2
S22
S3
S4
S5
S52
S6
S23(L)N
S24(L)N
S25(L)N
S28(L)N
Utility Ball valves 10K10K10K10K10K10K10K10K10K10K10K10K10K10K
StraightStraightStraightStraightStraightAngleAngleAngle
Ball(Built in Check)
Ball(Built in Check)
Ball(Built in Check)
Ball(Built in Check)
Ball(Built in Check)
Ball(Built in Check)
BrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrass
ThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreaded
Threaded(F&M) Threaded(F&M) Threaded(F&M)
4646464747474848495050505151
BS
BSS
RTUC
Balancing valves 10K10K10K
BalancerBalancer
Constant flow Valve
BronzeBronzeBronze
ThreadedThreadedThreaded
444444
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
TB
The valves introduced in this catalog are not designed to handle toxic gases.Use specially designed or certified valves for flammable gas service.CAUTION
S24(L)N - 3/4 x
S28(L)N - 3/4 x
C3TM
TM
TK AKTK TKT
TKW
TF
TFJ
TL TLT
CTLTU
CTL
TLTU
AK3TM
ZO
ZS
ZET
AKSZA
SZA
CSZA
CSZAWAKSZAW
TN AKTN CTN
T4LT4T AKT4T
CTNPAKTNP
Ball valves 40040040060060040040040040010K600600400600600600600400400400
BallBallBallBallBall
Full bore BallFull bore Ball
BallBallBallBall
Full bore BallBall
Full bore BallFull bore BallFull bore BallFull bore Ball
3-Way Ball3-Way Ball3-Way Ball
BrassBrassBrassBrassBrassBrassBrass
BronzeBronzeBronzeBrassBrassBrassBrassBrassBrassBrassBrass
BronzeBrass
ThreadedThreaded(F&M)
ThreadedThreadedThreadedThreadedThreaded
Threaded/SolderedThreaded/Union T/S
FlangedThreaded/Soldered
Threaded(F&M)ThreadedThreadedThreaded
Threaded/SolderedThreaded
Threaded/SolderedThreaded
Threaded/Soldered
2828292929303030313131323232333333343434
NAH
NSH
INAH
INSH
RAH
RSH
CNAH
CNSH
CRAH
CRSH
RTRM
RTRO
RTRR
RTRU
Fancoil valves 20020020020020020020020020020010K10K10K10K
AngleStraightAngle
StraightAngle
StraightAngle
StraightAngle
StraightBallBallBallBall
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronze
ThreadedThreadedThreadedThreadedThreadedThreaded
Threaded-SolderedThreaded-SolderedThreaded-SolderedThreaded-Soldered
ThreadedThreaded(F&M) Threaded(F&M) Threaded/Union
TGGas Service valves Ball Brass Threaded 36
AKTAF
CTAF
AKTFLL CTFLL
CTAFM
CTAFD
CTAFC
AKTAFM
AKTAFP
AKTAFPM
AKTAFD
AKTAFC
AKTAFO
AKTAFU
AKTAFS
TH
T
CTH
AKT TT
TO
Ball valves 600600600600600600600600600600200
400/600
Full bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore Ball
Ball
BrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrass
ThreadedSoldered
Threaded/SolderedThreaded/Soldered
ThreadedThreaded
Threaded/SolderedThreaded/Soldered
Threaded(M&F) Threaded/Union
ThreadedThreaded/Soldered
242424252525262626272728
A AKA
Q QA
C AKC
CA AKCA
B BH
G AKG
D
DB DBH
FR AKFS CFS
FH AKFH CFH
H AKH CH
E
EB EBH
F AKF
R AKR CR
RF AKAF CAF
VF
FT&FTS
Y AKY CY
YR
FV
CONTENTS
02 03
Tite Fig Class Type PageBody Material End Connection Tite Fig Class Type PageBody Material End Connection
KITZ Standardgate, globe, check,angle & butterfly valves,Y-pattern strainers.
100
150150150125150150125125125125150150150125125150(5K)(5K)
150175
GlobeGlobeGlobeAngleGlobeGlobeGlobeGlobeGateGateGateGateGateGate
Lift CheckSwing CheckSwing Check
Lift CheckLift Check
FootStrainerButterfly
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBrassBrass
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronze
ThreadedThreadedThreadedThreadedFlanged
ThreadedThreadedFlanged
Threaded/SolderedThreaded/SolderedThreaded/Soldered
ThreadedThreadedFlanged
ThreadedThreaded/Soldered
ThreadedThreaded/Soldered
ThreadedThreaded
Threaded/SolderedThreaded
66677788899910101011111112121213
AK125M C125M
AK125E C125E
S
AK150E
AK150L C150L
AK150LU
AK300LU
C150LU
AK125C C125C
AK150D
AK300D
AK300J
C150D
AKYR CYR
AK150YR C150YR
AK300YR
AS-FH
Industrialgate, globe & Check valves
125125150150150300125150300300125150300
PN16
GateGateGateGateGateGateGlobeGlobeGlobeGlobe
Swing CheckSwing CheckSwing Check
Gate
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBrass
Threaded/SolderedThreaded/Soldered
ThreadedThreaded/SolderedThreaded/Soldered
ThreadedThreaded/SolderedThreaded/Soldered
ThreadedThreaded
Threaded/SolderedThreaded/Soldered
ThreadedThreaded
1818181919192020202121212222
J
JB
M
L
LB
O
OB
10BW
JIS Standardgate, globe & Check valves
10K10K5K10K10K10K10K10K
GlobeGlobeGateGateGate
Swing CheckSwing CheckWafer Check
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronze
ThreadedFlanged
ThreadedThreadedFlanged
ThreadedFlangedWafer
1414141515151616
3838383939394040404142424243
S1
S2
S22
S3
S4
S5
S52
S6
S23(L)N
S24(L)N
S25(L)N
S28(L)N
Utility Ball valves 10K10K10K10K10K10K10K10K10K10K10K10K10K10K
StraightStraightStraightStraightStraightAngleAngleAngle
Ball(Built in Check)
Ball(Built in Check)
Ball(Built in Check)
Ball(Built in Check)
Ball(Built in Check)
Ball(Built in Check)
BrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrass
ThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreaded
Threaded(F&M) Threaded(F&M) Threaded(F&M)
4646464747474848495050505151
BS
BSS
RTUC
Balancing valves 10K10K10K
BalancerBalancer
Constant flow Valve
BronzeBronzeBronze
ThreadedThreadedThreaded
444444
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
TB
The valves introduced in this catalog are not designed to handle toxic gases.Use specially designed or certified valves for flammable gas service.CAUTION
S24(L)N - 3/4 x
S28(L)N - 3/4 x
Cu
83.0-87.0
Sn
4.0-6.0
Zn
4.0-6.0
Pb
4.0-6.0
Ni Fe P Sb Al Si
0.01Max.
0.01Max.
0.2Max.
0.05Max.
0.3Max.
1.0Max.
KITZ BRONZE & BRASS VALVES
KITZ “K-Metal”: Unique Dezincification Resistant Brass (UNS No. C35350)
KITZ BRONZE & BRASS VALVES
04 05
What is dezincification?
The following factors cause dezincification. These factors are generally believed to occurtogether, rather than independently.
Excessive aqueous solution in acidity.Warm water containing excessive free carbonic acid with high electric conductivity.High electric conductivity with excessive presence of chlorides and sulfides.Copper or vinyl chloride pipes.Excessive dissolved oxygen.
Solder joint end valves should not be used in servicewhere the temperature of the line fluid if higherthan the softening point of solder.
Water pollution and employment of new piping material have amplified valve dezincification problems.
KITZ Bronze and Brass Materials to JIS Standards
KITZ Bronze and Brass Materials to ASTM Standards
The copper alloy used in bronze valves contains zinc, tin, and lead with copper as a base. When bronze valves are subjected to unfavorable service conditions, the zinc component contained in the copper alloy separates from the copper base, and the metal corrodes. This is called dezincification. In case of bronze valve, the body, bonnet, and other cast bronze parts hardly corrode due to the small percent of zinc contained in the alloy. But brass valve parts such as stems, which contain 40% zinc, often corrodes due to extreme dezincification.
Copper tubing is widely used with bronze/brass valves in steam and water-line applications in schools, hospitals, hotels, and private houses because of excellent physical characteristics. It resists corrosion, meets sanitation require-ments, and is easy to install.Copper Tubes: There are three types of copper tubing for complying with ASTM B88 shown below.Each type is provided with a different wall thickness to meet application requirements.
What is K-Metal?
Fig. 1 Compared tensile strength Fig. 2 Compared hardness Fig. 3 Compared corrosion(1mg/cm2=0.014mlb/in2)
Fig. 4 Compared dezincification(to AS C316)
To combat dezincification, KITZ Corporation developed K-Metal as the stem material of bronze/brass valves. The test data given below compare the properties of K-Metal with JIS B124, B16 and B62, and also with another dezincification resistant material introduced by one of our competitors in Japan. The comparisons prove K-Metal's overall high performance and explain why KITZ bronze/brass valves offer longer service life. The extent of the corrosion and dezincifica-tion compared here are the values recorded after two weeks of laboratory experiments. Australian Standard C-316 was applied to the measurement of dezincification depth.
What causes dezincification? 1
2
3
4
5
JIS H5120-2006 (Copper & Copper Alloy Castings)
Bronze/Brass Valve Solder Joints
Use solder of 95-5 tin-antimony or 96-4 tin-silver, and an open-flame torch. Keep torch temperature relatively low to assure a firmly soldered joint. Because the solder melting point ranges 500°F (260°C) solder jointed valves cannot be used for high temperature service.
Soldering Leak-free Joints
CastbronzeClass 6
Chemical composition (%) Mechanical propertyDesignation
CAC406 (BC6)
Tensile strength195 Min. (N/mm2)
Elongation(%)
15 Min.
DrawnExtruded Cu
57.0-61.0
Pb
1.0-2.5
Fe + Sn
1.0 Max.
Zn
Remainder
JIS H3250-2006 (Copper & Copper Alloy Rods and Bars)
Forgedbrass AlloyNo. 3771
Chemical composition (%) Mechanical propertyDesignation
C3771BE C3771BD
Tensile strength315 Min. (N/mm2)
Elongation(%)
15 Min.
DrawnExtruded Cu
57.0-61.0
Pb
1.8-3.7
Fe
0.5 Max.
Fe + Sn
1.0 Max.
Zn
Remainder
JIS H3250-2006 (Copper & Copper Alloy Rods and Bars)
Free-cuttingbrass AlloyNo. 3604
Chemical composition (%) Mechanical propertyDesignation
C3604BE C3604BD
Tensile strength335 Min. (N/mm2)
Elongation(%)-
Copper
84.0-86.0 4.0-6.0 4.0-6.0 4.0-6.0
Tin Lead ZincNickel
&cobalt
1.0Max.
Iron
0.30Max.
Sulfer
0.08Max.
Phosphorus
0.05Max.
Antimony
0.25Max.
Aluminum
0.005Max.
Silicon
0.005Max.
ASTM B62-2002
Chemical composition (%) Mechanical properties
Minimum
Elongationin 2 in.20%
Yieldstrength
14 ksi
Tensilestrength
30 ksi
Solder P-T Rating
Copper
78.0-82.0 2.3-3.5 6.0-8.0 7.0-10.0
Tin Lead ZincNickel
&cobalt
1.0Max.
Iron
0.40Max.
Sulfer
0.08Max.
Phosphorus
0.02Max.
Antimony
0.25Max.
Aluminum
0.005Max.
Silicon
0.005Max.
Chemical composition (%) Mechanical properties
Minimum
Elongationin 2 in.18%
Yieldstrength
13 ksi
Tensilestrength
29 ksi
ASTM B584 C84400-2004
Copper
58.0-61.0
Lead
1.5-2.5
Iron
0.30 Max.
Zinc
Remainder
ASTM B283 C37700-2004
Chemical composition (%) Mechanical properties
Minimum
Yield strength18 ksi
Elongation in 4x thickness25%
Tensile strength50 ksi
K-Metal
0 20 40
Tensile Strength (ksi)
60 80
B-124No.C377700
B16
Competitor’sMaterial
B62
K-Metal
0 20 40 60 80
Hardness (HRB)
100
B-124No.C377700
B16
Competitor’sMaterial
B62
K-Metal
0 20 40
Corrosion Quantity (mg/cm2)
60
B-124No.C377700
B16
Competitor’sMaterial
B62
K-Metal
0 0.01 0.02
Dezincification Depth (inch)
0.03 0.04
B-124No.C377700
B16
Competitor’sMaterial
B62
For use in steam, oil and gas lines for undergroundinstallation and/or severe conditions.
For general cooling and heating systems and relatedwater piping and ventilation systems.
For home air-conditioning and heating applications.
Type K
Type L
Type M
CAUTION
psi MPa psi
Max. working pressure
MPa psi
38
66
93
121
3.45
2.76
2.07
1.38
MPa
size 1/4”~1” size 1/4”~2” size 21/4”~4”SolderMax.temp.
(°C)
95-5tin-antimony[H95 Sb-5A]
96-4tin-silver
[H96 Ag-3.5A]
500
400
300
200
2.76
2.41
1.72
1.21
400
350
250
175
2.07
1.90
1.38
1.03
300
275
200
150
Compliance with RoHS Requirements.
Aiming to reduce the negative environmental health impact, KITZ CORPORATION can offer products which meet the restriction of the use of six hazardous substances imposed by RoHS* directive of EU, namely mercury, lead, cadmium, hexavalent chromium, PBB and PBDE, to the market. The products meeting this requirement bear the symbol shown below. Please consult KITZ for more details on these products.
*The Restriction of the use of certain Hazardous Substances in electrical and electronic equipmentSymbol
®
Cu
83.0-87.0
Sn
4.0-6.0
Zn
4.0-6.0
Pb
4.0-6.0
Ni Fe P Sb Al Si
0.01Max.
0.01Max.
0.2Max.
0.05Max.
0.3Max.
1.0Max.
KITZ BRONZE & BRASS VALVES
KITZ “K-Metal”: Unique Dezincification Resistant Brass (UNS No. C35350)
KITZ BRONZE & BRASS VALVES
04 05
What is dezincification?
The following factors cause dezincification. These factors are generally believed to occurtogether, rather than independently.
Excessive aqueous solution in acidity.Warm water containing excessive free carbonic acid with high electric conductivity.High electric conductivity with excessive presence of chlorides and sulfides.Copper or vinyl chloride pipes.Excessive dissolved oxygen.
Solder joint end valves should not be used in servicewhere the temperature of the line fluid if higherthan the softening point of solder.
Water pollution and employment of new piping material have amplified valve dezincification problems.
KITZ Bronze and Brass Materials to JIS Standards
KITZ Bronze and Brass Materials to ASTM Standards
The copper alloy used in bronze valves contains zinc, tin, and lead with copper as a base. When bronze valves are subjected to unfavorable service conditions, the zinc component contained in the copper alloy separates from the copper base, and the metal corrodes. This is called dezincification. In case of bronze valve, the body, bonnet, and other cast bronze parts hardly corrode due to the small percent of zinc contained in the alloy. But brass valve parts such as stems, which contain 40% zinc, often corrodes due to extreme dezincification.
Copper tubing is widely used with bronze/brass valves in steam and water-line applications in schools, hospitals, hotels, and private houses because of excellent physical characteristics. It resists corrosion, meets sanitation require-ments, and is easy to install.Copper Tubes: There are three types of copper tubing for complying with ASTM B88 shown below.Each type is provided with a different wall thickness to meet application requirements.
What is K-Metal?
Fig. 1 Compared tensile strength Fig. 2 Compared hardness Fig. 3 Compared corrosion(1mg/cm2=0.014mlb/in2)
Fig. 4 Compared dezincification(to AS C316)
To combat dezincification, KITZ Corporation developed K-Metal as the stem material of bronze/brass valves. The test data given below compare the properties of K-Metal with JIS B124, B16 and B62, and also with another dezincification resistant material introduced by one of our competitors in Japan. The comparisons prove K-Metal's overall high performance and explain why KITZ bronze/brass valves offer longer service life. The extent of the corrosion and dezincifica-tion compared here are the values recorded after two weeks of laboratory experiments. Australian Standard C-316 was applied to the measurement of dezincification depth.
What causes dezincification? 1
2
3
4
5
JIS H5120-2006 (Copper & Copper Alloy Castings)
Bronze/Brass Valve Solder Joints
Use solder of 95-5 tin-antimony or 96-4 tin-silver, and an open-flame torch. Keep torch temperature relatively low to assure a firmly soldered joint. Because the solder melting point ranges 500°F (260°C) solder jointed valves cannot be used for high temperature service.
Soldering Leak-free Joints
CastbronzeClass 6
Chemical composition (%) Mechanical propertyDesignation
CAC406 (BC6)
Tensile strength195 Min. (N/mm2)
Elongation(%)
15 Min.
DrawnExtruded Cu
57.0-61.0
Pb
1.0-2.5
Fe + Sn
1.0 Max.
Zn
Remainder
JIS H3250-2006 (Copper & Copper Alloy Rods and Bars)
Forgedbrass AlloyNo. 3771
Chemical composition (%) Mechanical propertyDesignation
C3771BE C3771BD
Tensile strength315 Min. (N/mm2)
Elongation(%)
15 Min.
DrawnExtruded Cu
57.0-61.0
Pb
1.8-3.7
Fe
0.5 Max.
Fe + Sn
1.0 Max.
Zn
Remainder
JIS H3250-2006 (Copper & Copper Alloy Rods and Bars)
Free-cuttingbrass AlloyNo. 3604
Chemical composition (%) Mechanical propertyDesignation
C3604BE C3604BD
Tensile strength335 Min. (N/mm2)
Elongation(%)-
Copper
84.0-86.0 4.0-6.0 4.0-6.0 4.0-6.0
Tin Lead ZincNickel
&cobalt
1.0Max.
Iron
0.30Max.
Sulfer
0.08Max.
Phosphorus
0.05Max.
Antimony
0.25Max.
Aluminum
0.005Max.
Silicon
0.005Max.
ASTM B62-2002
Chemical composition (%) Mechanical properties
Minimum
Elongationin 2 in.20%
Yieldstrength
14 ksi
Tensilestrength
30 ksi
Solder P-T Rating
Copper
78.0-82.0 2.3-3.5 6.0-8.0 7.0-10.0
Tin Lead ZincNickel
&cobalt
1.0Max.
Iron
0.40Max.
Sulfer
0.08Max.
Phosphorus
0.02Max.
Antimony
0.25Max.
Aluminum
0.005Max.
Silicon
0.005Max.
Chemical composition (%) Mechanical properties
Minimum
Elongationin 2 in.18%
Yieldstrength
13 ksi
Tensilestrength
29 ksi
ASTM B584 C84400-2004
Copper
58.0-61.0
Lead
1.5-2.5
Iron
0.30 Max.
Zinc
Remainder
ASTM B283 C37700-2004
Chemical composition (%) Mechanical properties
Minimum
Yield strength18 ksi
Elongation in 4x thickness25%
Tensile strength50 ksi
K-Metal
0 20 40
Tensile Strength (ksi)
60 80
B-124No.C377700
B16
Competitor’sMaterial
B62
K-Metal
0 20 40 60 80
Hardness (HRB)
100
B-124No.C377700
B16
Competitor’sMaterial
B62
K-Metal
0 20 40
Corrosion Quantity (mg/cm2)
60
B-124No.C377700
B16
Competitor’sMaterial
B62
K-Metal
0 0.01 0.02
Dezincification Depth (inch)
0.03 0.04
B-124No.C377700
B16
Competitor’sMaterial
B62
For use in steam, oil and gas lines for undergroundinstallation and/or severe conditions.
For general cooling and heating systems and relatedwater piping and ventilation systems.
For home air-conditioning and heating applications.
Type K
Type L
Type M
CAUTION
psi MPa psi
Max. working pressure
MPa psi
38
66
93
121
3.45
2.76
2.07
1.38
MPa
size 1/4”~1” size 1/4”~2” size 21/4”~4”SolderMax.temp.
(°C)
95-5tin-antimony[H95 Sb-5A]
96-4tin-silver
[H96 Ag-3.5A]
500
400
300
200
2.76
2.41
1.72
1.21
400
350
250
175
2.07
1.90
1.38
1.03
300
275
200
150
Compliance with RoHS Requirements.
Aiming to reduce the negative environmental health impact, KITZ CORPORATION can offer products which meet the restriction of the use of six hazardous substances imposed by RoHS* directive of EU, namely mercury, lead, cadmium, hexavalent chromium, PBB and PBDE, to the market. The products meeting this requirement bear the symbol shown below. Please consult KITZ for more details on these products.
*The Restriction of the use of certain Hazardous Substances in electrical and electronic equipmentSymbol
®
H
L
D
H
L
D
H
L
D
H
L
L
D
H
L
D
H
L
D
KITZ BRONZE & BRASS VALVES
CLASS 100 Screwed Bonnet, Rising StemThreaded ends to BS21 (JIS B0203) or NPT
Dimensions mm
BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
1/4
8mm
inch
406650
426750
486955
538060
639470
7310480
8112790
94147100
115179115
131200135
171250180
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
4100• Threaded end to BS21 (JIS B0203)
Fig. A
• Threaded end to ASME B1.20.1
Fig. AKA
• Rubber Disc
Fig. Q• PTFE Disc (for oil service)
Fig. QA
• Threaded end to BS21 (JIS B0203)
Fig. C
• Threaded end to ASME B1.20.1
Fig. AKC
• Threaded end to BS21 (JIS B0203)
Fig. CA
• Threaded end to ASME B1.20.1
Fig. AKCA
• Undrilled unless drilling is specified as an option
Fig. B
• Drilled according to JIS 10K
Fig. BH
• Threaded end to BS21 (JIS B0203)
Fig. G
• Threaded end to ASME B1.20.1
Fig. AKG
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzePlastic Graphite
*Size 4 only
06 07
Dimensions mm1/4
8mm
inch
446650
446850
537960
659370
7710480
8512790
100145100
119174115
139199135
158215155
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzePlastic Graphite
*Size 3 only
Screwed Bonnet, Rising Stem, Soft seated discThreaded ends to BS21 (JIS B0203)
Dimensions mm
BRONZE GLOBE VALVE
mm
inch
447050
507355
638660
7310880
8113290
94150100
1/2
15
3/4
20125
11/4
3211/2
40250
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrassDezincification Resistant BrassUrethane rubber/PTFEPlastic Graphite
CLASS 150 Screwed Bonnet, Rising StemThreaded ends to BS21 (JIS B0203) or NPTBRONZE GLOBE VALVE
Dimensions mm1/4
8mm
inch
216650
246850
287960
349370
4010480
4712790
52145100
61174115
74199135
85215155
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzePlastic Graphite
*Size 3 only
CLASS 150 BRONZE GLOBE VALVE
• B is undrilled unless drilling is specified as an option.
Dimensions mm
*Shall not be in accordance with JIS B 2240
mm
inch
8379958.5
8894
1009.5
1001051259.5
1131271359.5
12014514011.5
14517415512.5
16519817513
17721518514
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
20025021017
4100
Thicknesst*
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzePlastic Graphite
*Size 3 and 4
CLASS 150 BRONZE GLOBE VALVE
Dimensions mm1/4
8mm
inch
476850
538855
5710060
6611070
7612080
8814090
100156100
120185115
147210135
162229155
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassReinforced PTFEPlastic Graphite
*Size 21/2 and 3
CLASS 125 BRONZE GLOBE VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
Screwed Bonnet, Angle type body, Rising StemThreaded ends to BS21 (JIS B0203) or NPT
Screwed Bonnet, Rising StemFlanged ends drilled or undrilled optionally.
Union Bonnet*, Rising Stem, Soft seated discThreaded ends to BS21 (JIS B0203) or NPT
*Size 4; Screw Bonnet
Nominal Size
Nominal Size
Nominal Size
Nominal Size
Nominal Size
Nominal Size
W.O.G. non-shock 1.03 MPa (150 psi), Saturated steam pressure 0.7 MPa (100 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 0.86 MPa (125 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 1.55 MPa (225 psi), Saturated steam pressure 1.03 MPa (150 psi)
Threaded end to end
Height, valve open
Handwheel diam
LHD
Threaded end to end
Height, valve open
Handwheel diam
LHD
Threaded end to end
Height, valve open
Handwheel diam
LHD
Threaded end to end
Height, valve open
Handwheel diam
LHD
Threaded end to end
Height, valve open
Handwheel diam
LHD
Threaded end to end
Height, valve open
Handwheel diam
LHD
H
L
D
H
L
D
H
L
D
H
L
L
D
H
L
D
H
L
D
KITZ BRONZE & BRASS VALVES
CLASS 100 Screwed Bonnet, Rising StemThreaded ends to BS21 (JIS B0203) or NPT
Dimensions mm
BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
1/4
8mm
inch
406650
426750
486955
538060
639470
7310480
8112790
94147100
115179115
131200135
171250180
3/8
10
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
804
100• Threaded end to BS21 (JIS B0203)
Fig. A
• Threaded end to ASME B1.20.1
Fig. AKA
• Rubber Disc
Fig. Q• PTFE Disc (for oil service)
Fig. QA
• Threaded end to BS21 (JIS B0203)
Fig. C
• Threaded end to ASME B1.20.1
Fig. AKC
• Threaded end to BS21 (JIS B0203)
Fig. CA
• Threaded end to ASME B1.20.1
Fig. AKCA
• Undrilled unless drilling is specified as an option
Fig. B
• Drilled according to JIS 10K
Fig. BH
• Threaded end to BS21 (JIS B0203)
Fig. G
• Threaded end to ASME B1.20.1
Fig. AKG
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzePlastic Graphite
*Size 4 only
06 07
Dimensions mm1/4
8mm
inch
446650
446850
537960
659370
7710480
8512790
100145100
119174115
139199135
158215155
3/8
10
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
80
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzePlastic Graphite
*Size 3 only
Screwed Bonnet, Rising Stem, Soft seated discThreaded ends to BS21 (JIS B0203)
Dimensions mm
BRONZE GLOBE VALVE
mm
inch
447050
507355
638660
7310880
8113290
94150100
1/2
15
3/4
201
2511/4
3211/2
402
50
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrassDezincification Resistant BrassUrethane rubber/PTFEPlastic Graphite
CLASS 150 Screwed Bonnet, Rising StemThreaded ends to BS21 (JIS B0203) or NPTBRONZE GLOBE VALVE
Dimensions mm1/4
8mm
inch
216650
246850
287960
349370
4010480
4712790
52145100
61174115
74199135
85215155
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzePlastic Graphite
*Size 3 only
CLASS 150 BRONZE GLOBE VALVE
• B is undrilled unless drilling is specified as an option.
Dimensions mm
*Shall not be in accordance with JIS B 2240
mm
inch
8379958.5
8894
1009.5
1001051259.5
1131271359.5
12014514011.5
14517415512.5
16519817513
17721518514
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
20025021017
4100
Thicknesst*
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzePlastic Graphite
*Size 3 and 4
CLASS 150 BRONZE GLOBE VALVE
Dimensions mm1/4
8mm
inch
476850
538855
5710060
6611070
7612080
8814090
100156100
120185115
147210135
162229155
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassReinforced PTFEPlastic Graphite
*Size 21/2 and 3
CLASS 125 BRONZE GLOBE VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
Screwed Bonnet, Angle type body, Rising StemThreaded ends to BS21 (JIS B0203) or NPT
Screwed Bonnet, Rising StemFlanged ends drilled or undrilled optionally.
Union Bonnet*, Rising Stem, Soft seated discThreaded ends to BS21 (JIS B0203) or NPT
*Size 4; Screw Bonnet
Nominal Size
Nominal Size
Nominal Size
Nominal Size
Nominal Size
Nominal Size
W.O.G. non-shock 1.03 MPa (150 psi), Saturated steam pressure 0.7 MPa (100 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 0.86 MPa (125 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 1.55 MPa (225 psi), Saturated steam pressure 1.03 MPa (150 psi)
Threaded end to end
Height, valve open
Handwheel diam
LHD
Threaded end to end
Height, valve open
Handwheel diam
LHD
Threaded end to end
Height, valve open
Handwheel diam
LHD
Threaded end to end
Height, valve open
Handwheel diam
LHD
Threaded end to end
Height, valve open
Handwheel diam
LHD
Threaded end to end
Height, valve open
Handwheel diam
LHD
H
L
D
H
L
D
H
L
D
H
L
D
H
L
D
H
L
D
Dimensions mm
*Shall not be in accordance with JIS B 2240
*21/2 and 3 = AKFS only
mm
inch
82113608
95138909
10815610010
12018411511
14018711512
16521213513
19024415514
22028118015
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
27032122517
4100
Thicknesst*
Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LHD
Dimensions mm
mm
inch
42457350
47608755
50709760
6077
11770
6386
12680
7210215490
80
167100
90
200115
1/2
1538
7350
3/8
10
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LSolderL1
HD
KITZ BRONZE & BRASS VALVES
CLASS 150 Union Bonnet, Rising Stem, Soft seated discThreaded ends to BS21 (JIS B0203)BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
• Threaded end to BS21 (JIS B0203)
Fig. D
• Undrilled unless drilling is specified as an option
Fig. DB
• Drilled according to JIS 10K
Fig. DBH
• Threaded end to BS21 (JIS B0203)
Fig. FH
• Threaded end to ASME B1.20.1
Fig. AKFH
• Solder joint endsto ASME B16.18
Fig. CFH
• Threaded end to BS21 (JIS B0203)
Fig. H
• Threaded end to ASME B1.20.1
Fig. AKH
• Solder joint endsto ASME B16.18
Fig. CH
• Threaded end to BS21 (JIS B0203)
Fig. FR
• Threaded end to ASME B1.20.1
Fig. AKFS
• Solder joint endsto ASME B16.18
Fig. CFS
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassReinforced PTFEPlastic Graphite
*Size 11/2 & 2
08 09
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBrassBrassDezincification Resistant BrassBrassPlastic Graphite
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
*Size 11/2 & larger**Size 4 only
CLASS 150 Union Bonnet*, Rising Stem, Soft seated discFlanged ends drilled or undrilled optionally.BRONZE GLOBE VALVE
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassReinforced PTFEPlastic Graphite/PTFE fiber braid**
CLASS 125Screwed Bonnet, Non-rising Stem
Threaded ends to BS21 (JIS B0203) or NPT,or solder joint ends.
BRASS GATE VALVE
Dimensions mm1/4
8mm
inch
35
7050
38377350
42457350
47608755
50709760
6077
11870
6386
12680
7210415490
82115187100
92127205115
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBrassBrassDezincification Resistant BrassBrassPlastic Graphite
CLASS 125 BRASS GATE VALVE
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassDezincification Resistant Brass/Bronze*Plastic Graphite
*Size 3/4 & larger
CLASS 125 BRONZE GATE VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
Screwed Bonnet, Non-rising StemThreaded ends to BS21 (JIS B0203) or NPT,
or solder joint ends.
Screwed Bonnet, Non-rising StemThreaded ends to BS21 (JIS B0203) or NPT,
or solder joint ends.3/8 to 2 Screwed-over-bonnet*Size 21/2 and larger : Bolted bonnet
Nominal Size
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 1.55 MPa (225 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
Threaded end to end
Height, valve open
Handwheel diam
LSolderL1
HD
Dimensions mm
mm
inch
42397450
45468050
50619055
5772
10560
6178
11870
6787
13580
7410215990
90115202115
100130223135
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
121173280155
4100
Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LSolderL1
HD
Dimensions mm
mm
inch
6411360
7813890
90156100
105184115
120187115
145212135
1/2
15
3/4
20125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LHD
Dimensions mm
mm
inch
478655
509760
6011770
6312680
7215490
80164100
90200115
3/4
20427550
1/2
15387550
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
BRONZE GATE VALVEW.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrassDezincification Resistant BrassBrassPlastic Graphite
CLASS 125 Screwed Bonnet, Non-rising Stem,Threaded ends to BS21 (JIS B0203)
Threaded end to end
Handwheel diam
LHeight, valve openH
D• Threaded end to JIS B0203
Fig. S
H
L
D
H
L
D
H
L
D
H
L
D
H
L
D
H
L
D
Dimensions mm
*Shall not be in accordance with JIS B 2240
*21/2 and 3 = AKFS only
mm
inch
82113608
95138909
10815610010
12018411511
14018711512
16521213513
19024415514
22028118015
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
8027032122517
4100
Thicknesst*
Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LHD
Dimensions mm
mm
inch
42457350
47608755
50709760
6077
11770
6386
12680
7210215490
80
167100
90
200115
1/2
1538
7350
3/8
10
3/4
201
2511/4
3211/2
402
5021/2
653
80Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LSolderL1
HD
KITZ BRONZE & BRASS VALVES
CLASS 150 Union Bonnet, Rising Stem, Soft seated discThreaded ends to BS21 (JIS B0203)BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
• Threaded end to BS21 (JIS B0203)
Fig. D
• Undrilled unless drilling is specified as an option
Fig. DB
• Drilled according to JIS 10K
Fig. DBH
• Threaded end to BS21 (JIS B0203)
Fig. FH
• Threaded end to ASME B1.20.1
Fig. AKFH
• Solder joint endsto ASME B16.18
Fig. CFH
• Threaded end to BS21 (JIS B0203)
Fig. H
• Threaded end to ASME B1.20.1
Fig. AKH
• Solder joint endsto ASME B16.18
Fig. CH
• Threaded end to BS21 (JIS B0203)
Fig. FR
• Threaded end to ASME B1.20.1
Fig. AKFS
• Solder joint endsto ASME B16.18
Fig. CFS
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassReinforced PTFEPlastic Graphite
*Size 11/2 & 2
08 09
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBrassBrassDezincification Resistant BrassBrassPlastic Graphite
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
*Size 11/2 & larger**Size 4 only
CLASS 150 Union Bonnet*, Rising Stem, Soft seated discFlanged ends drilled or undrilled optionally.BRONZE GLOBE VALVE
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassReinforced PTFEPlastic Graphite/PTFE fiber braid**
CLASS 125Screwed Bonnet, Non-rising Stem
Threaded ends to BS21 (JIS B0203) or NPT,or solder joint ends.
BRASS GATE VALVE
Dimensions mm1/4
8mm
inch
35
7050
38377350
42457350
47608755
50709760
6077
11870
6386
12680
7210415490
82115187100
92127205115
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBrassBrassDezincification Resistant BrassBrassPlastic Graphite
CLASS 125 BRASS GATE VALVE
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassDezincification Resistant Brass/Bronze*Plastic Graphite
*Size 3/4 & larger
CLASS 125 BRONZE GATE VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
Screwed Bonnet, Non-rising StemThreaded ends to BS21 (JIS B0203) or NPT,
or solder joint ends.
Screwed Bonnet, Non-rising StemThreaded ends to BS21 (JIS B0203) or NPT,
or solder joint ends.3/8 to 2 Screwed-over-bonnet*Size 21/2 and larger : Bolted bonnet
Nominal Size
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 1.55 MPa (225 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
Threaded end to end
Height, valve open
Handwheel diam
LSolderL1
HD
Dimensions mm
mm
inch
42397450
45468050
50619055
5772
10560
6178
11870
6787
13580
7410215990
90115202115
100130223135
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
121173280155
4100
Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LSolderL1
HD
Dimensions mm
mm
inch
6411360
7813890
90156100
105184115
120187115
145212135
1/2
15
3/4
201
2511/4
3211/2
402
50Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LHD
Dimensions mm
mm
inch
478655
509760
6011770
6312680
7215490
80164100
90200115
3/4
20427550
1/2
15387550
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
BRONZE GATE VALVEW.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrassDezincification Resistant BrassBrassPlastic Graphite
CLASS 125 Screwed Bonnet, Non-rising Stem,Threaded ends to BS21 (JIS B0203)
Threaded end to end
Handwheel diam
LHeight, valve openH
D• Threaded end to JIS B0203
Fig. S
H
L
D
H
L
H
L
L
S
H
L
D
H
L
Dimensions mm
*Shall not be in accordance with JIS B 2240
mm
inch
7596558
80111609
95122709.5
11014280
10.5
12016590
11.5
14019710013
16522511514.5
19026415516
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
23030922519.5
4100
Thicknesst*
Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LHD
KITZ BRONZE & BRASS VALVES
CLASS 150 Screwed Bonnet, Non-rising StemFlanged ends drilled or undrilled optionally.BRONZE GATE VALVE
KITZ BRONZE & BRASS VALVES
• Drilled according to JIS 10K
Fig. EBH
• Undrilled unless drilling is specified as an option
Fig. EB
• Threaded end to BS21 (JIS B0203)
Fig. RF
• Threaded end to ASME B1.20.1
Fig. AKAF
• Solder joint endsto ASME B16.18
Fig. CAF
• Threaded end to BS21 (JIS B0203)
Fig. R
• Threaded end to ASME B1.20.1
Fig. AKR
• Solder joint endsto JIS B2011 /
ASME B16.18 (21/2 & 3)
Fig. CR
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzePlastic Graphite
*Size 21/2 & larger
MaterialsParts
BodyCapDisc
MaterialBronzeBrass/Bronze*Bronze
*Size 21/2 & 3
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrass/Bronze*BrassBrass/Bronze*
*Size 4 only
10 11
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Screwed cap, Lift type discThreaded ends to BS21 (JIS B0203)BRONZE LIFT CHECK VALVE
CLASS 125Screwed Cap, Swing type disc
Threaded ends to BS21 (JIS B0203) or NPT,or solder joint ends.BRONZE SWING CHECK VALVE
Dimensions mm
mm
inch
53612628
59763234
67893941
78974850
841105457
981326770
1/2
15
3/4
20125
11/4
3211/2
40250
MaterialsParts
BodyCapDisc
MaterialBronzeBronzeNBR
CLASS 150 BRONZE LIFT CHECK VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
Nominal Size
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi) W.O.G. non-shock 1.72 MPa (250 psi)
Threaded end to endLSolderL1
S (AKAF)S (RF)
Dimensions mm
mm
inch
535639
606739
708945
8010452
9212062
10213467
12216479
15019391
165213102
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
195
119
4100
Nominal Size
Threaded end to end
Height
LSolderL1
H
Dimensions mm
mm
inch
4426
5328
6534
7742
8550
10056
11967
13979
15891
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
4100
Nominal Size
Threaded end to end
Height, valve open
LH
CLASS 150
• Threaded end to ASME B1.20.1
Fig. AKF
• Threaded end to BS21 (JIS B0203)
Fig. F
Screwed Cap, Lift type discThreaded ends to BS21 (JIS B0203) or NPT,
or solder joint ends.
Dimensions mm
mm
inch
489655
5311160
6212270
6914180
7516490
86197100
105225115
116261135
1/2
15438650
3/8
10
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LHD• Threaded end to BS21 (JIS B0203)
Fig. E
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzePlastic Graphite
*Size 21/2 & 3
CLASS 150 BRONZE GATE VALVE Screwed Bonnet, Non-rising StemThreaded ends to BS21 (JIS B0203) or NPT
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
Dimensions mm
mm
inch
704947
805856
957169
1108077
1289592
158114111
184131127
3/4
20125
11/4
3211/2
40564038
1/2
15250
21/2
65380
Nominal Size
Threaded end to end
Height
LH
SolderH
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassCopperBronze
BRONZE Y-PATTERN SWING CHECK VALVEW.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
CLASS 125 Screwed cap, Swing type disc,Threaded ends to BS21 (JIS B0203)
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to BS21
Fig. YR
H
L
D
H
L
H
L
L
S
H
L
D
H
L
Dimensions mm
*Shall not be in accordance with JIS B 2240
mm
inch
7596558
80111609
95122709.5
11014280
10.5
12016590
11.5
14019710013
16522511514.5
19026415516
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
8023030922519.5
4100
Thicknesst*
Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LHD
KITZ BRONZE & BRASS VALVES
CLASS 150 Screwed Bonnet, Non-rising StemFlanged ends drilled or undrilled optionally.BRONZE GATE VALVE
KITZ BRONZE & BRASS VALVES
• Drilled according to JIS 10K
Fig. EBH
• Undrilled unless drilling is specified as an option
Fig. EB
• Threaded end to BS21 (JIS B0203)
Fig. RF
• Threaded end to ASME B1.20.1
Fig. AKAF
• Solder joint endsto ASME B16.18
Fig. CAF
• Threaded end to BS21 (JIS B0203)
Fig. R
• Threaded end to ASME B1.20.1
Fig. AKR
• Solder joint endsto JIS B2011 /
ASME B16.18 (21/2 & 3)
Fig. CR
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzePlastic Graphite
*Size 21/2 & larger
MaterialsParts
BodyCapDisc
MaterialBronzeBrass/Bronze*Bronze
*Size 21/2 & 3
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrass/Bronze*BrassBrass/Bronze*
*Size 4 only
10 11
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Screwed cap, Lift type discThreaded ends to BS21 (JIS B0203)BRONZE LIFT CHECK VALVE
CLASS 125Screwed Cap, Swing type disc
Threaded ends to BS21 (JIS B0203) or NPT,or solder joint ends.BRONZE SWING CHECK VALVE
Dimensions mm
mm
inch
53612628
59763234
67893941
78974850
841105457
981326770
1/2
15
3/4
20125
11/4
3211/2
40250
MaterialsParts
BodyCapDisc
MaterialBronzeBronzeNBR
CLASS 150 BRONZE LIFT CHECK VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
Nominal Size
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi) W.O.G. non-shock 1.72 MPa (250 psi)
Threaded end to endLSolderL1
S (AKAF)S (RF)
Dimensions mm
mm
inch
535639
606739
708945
8010452
9212062
10213467
12216479
15019391
165213102
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
195
119
4100
Nominal Size
Threaded end to end
Height
LSolderL1
H
Dimensions mm
mm
inch
4426
5328
6534
7742
8550
10056
11967
13979
15891
3/8
10
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
804
100Nominal Size
Threaded end to end
Height, valve open
LH
CLASS 150
• Threaded end to ASME B1.20.1
Fig. AKF
• Threaded end to BS21 (JIS B0203)
Fig. F
Screwed Cap, Lift type discThreaded ends to BS21 (JIS B0203) or NPT,
or solder joint ends.
Dimensions mm
mm
inch
489655
5311160
6212270
6914180
7516490
86197100
105225115
116261135
1/2
15438650
3/8
10
3/4
201
2511/4
3211/2
402
5021/2
653
80Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LHD• Threaded end to BS21 (JIS B0203)
Fig. E
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzePlastic Graphite
*Size 21/2 & 3
CLASS 150 BRONZE GATE VALVE Screwed Bonnet, Non-rising StemThreaded ends to BS21 (JIS B0203) or NPT
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
Dimensions mm
mm
inch
704947
805856
957169
1108077
1289592
158114111
184131127
3/4
20125
11/4
3211/2
40564038
1/2
15250
21/2
65380
Nominal Size
Threaded end to end
Height
LH
SolderH
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassCopperBronze
BRONZE Y-PATTERN SWING CHECK VALVEW.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
CLASS 125 Screwed cap, Swing type disc,Threaded ends to BS21 (JIS B0203)
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to BS21
Fig. YR
H
A60 ゚
60 ゚
B
L
H1
D
H
L
B
H
D
H1
L
S
1.41.5
2.42.5
A B
Dimensions mm
mm
inch
80804968
1001055783
11512570
105
13514582
124
16017098
149
195210121188
230250148216
240280180267
1/2
1570
4461
3/8
10
3/8 to 221/2 to 3
3/4
20125
11/4
3211/2
40250
21/2
65380
H1
Nominal Size
Threaded end to end
Height
Solder
LL1H
KITZ BRONZE & BRASS VALVES
CLASS 150Y-Pattern body, Screwed cap, 304 stainless steel screen
Threaded ends to BS21 (JIS B0203) or NPT,or solder joint ends.
Y-PATTERN STRAINER
KITZ BRONZE & BRASS VALVES
• Threaded end to BS21 (JIS B0203)
Fig. Y
• Threaded end to ASME B1.20.1
Fig. AKY
• Solder joint endsto JIS B2011 /
ASME B16.18 (21/2 & 3)
Fig. CY
MaterialsParts
BodyBody capScreen
MaterialBronzeBrassType 304 stainless steel
MaterialsParts
BodyStem
Disc
O-ring
MaterialBrassType 304 stainless steelType 304 stainless steel+ white-NBRNBR
12 13
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
NBR lined disc, Balancing stop hand leverThreaded endsBRASS BUTTERFLY VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi) up to size 2*
W.O.G. non-shock 1.21 MPa (175 psi)
Dimensions mm
mm
inch
474585
514785
585085
6760
110
7364
110
8270
110
1/2
15
3/4
20125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Height
Handwheel diam
LHD
CLASS 175
• Threaded end to BS21 (JIS B0203)
Fig. FV
*Contact KITZ for lager sizes
Dimensions mm
mm
inch
484125
585229
626232
707035
808343
9010250
10011651
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
Height
Screen
HDH1• Threaded end to BS21 (JIS B0203)
Fig. FT (Screen)
Fig. FTS
BRONZE LIFT CHECK VALVE Screwed cap, Lift type discThreaded ends to B21 (JIS B0203)
Water 80ºC (0.49 MPa)
MaterialsParts
BodyCapDisc
MaterialBronzeBronzeNBR
5K
• Threaded end to BS21
Fig. VF
BRONZE LIFT CHECK VALVE Screwed cap, Lift type discThreaded ends
W.O.G. non-shock 120ºC (0.49 MPa)
Dimensions mm
mm
inch
6245
6952
8263
11/4
3211/2
40250
Nominal Size
Threaded end to endLS
MaterialsParts
BodyCapDisc
MaterialBronzeBronzeBronze
5K
H
A60 ゚
60 ゚
B
L
H1
D
H
L
B
H
D
H1
L
S
1.41.5
2.42.5
A B
Dimensions mm
mm
inch
80804968
1001055783
11512570
105
13514582
124
16017098
149
195210121188
230250148216
240280180267
1/2
1570
4461
3/8
10
3/8 to 221/2 to 3
3/4
201
2511/4
3211/2
402
5021/2
653
80
H1
Nominal Size
Threaded end to end
Height
Solder
LL1H
KITZ BRONZE & BRASS VALVES
CLASS 150Y-Pattern body, Screwed cap, 304 stainless steel screen
Threaded ends to BS21 (JIS B0203) or NPT,or solder joint ends.
Y-PATTERN STRAINER
KITZ BRONZE & BRASS VALVES
• Threaded end to BS21 (JIS B0203)
Fig. Y
• Threaded end to ASME B1.20.1
Fig. AKY
• Solder joint endsto JIS B2011 /
ASME B16.18 (21/2 & 3)
Fig. CY
MaterialsParts
BodyBody capScreen
MaterialBronzeBrassType 304 stainless steel
MaterialsParts
BodyStem
Disc
O-ring
MaterialBrassType 304 stainless steelType 304 stainless steel+ white-NBRNBR
12 13
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
NBR lined disc, Balancing stop hand leverThreaded endsBRASS BUTTERFLY VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi) up to size 2*
W.O.G. non-shock 1.21 MPa (175 psi)
Dimensions mm
mm
inch
474585
514785
585085
6760
110
7364
110
8270
110
1/2
15
3/4
20125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Height
Handwheel diam
LHD
CLASS 175
• Threaded end to BS21 (JIS B0203)
Fig. FV
*Contact KITZ for lager sizes
Dimensions mm
mm
inch
484125
585229
626232
707035
808343
9010250
10011651
3/4
201
2511/4
3211/2
402
5021/2
653
80Nominal Size
Height
Screen
HDH1• Threaded end to BS21 (JIS B0203)
Fig. FT (Screen)
Fig. FTS
BRONZE LIFT CHECK VALVE Screwed cap, Lift type discThreaded ends to B21 (JIS B0203)
Water 80ºC (0.49 MPa)
MaterialsParts
BodyCapDisc
MaterialBronzeBronzeNBR
5K
• Threaded end to BS21
Fig. VF
BRONZE LIFT CHECK VALVE Screwed cap, Lift type discThreaded ends
W.O.G. non-shock 120ºC (0.49 MPa)
Dimensions mm
mm
inch
6245
6952
8263
11/4
3211/2
402
50Nominal Size
Threaded end to endLS
MaterialsParts
BodyCapDisc
MaterialBronzeBronzeBronze
5K
H
L
D
H
L
D
H
L
D
H
L
H
L
D
H
D
L
• B is undrilled unless drilling is specified as an option.
Dimensions mm
”t” Shall not be in accordance with JIS B 2011 **3/4 & 4 shall not be in accordance with JIS B2011
mm
inch
901537010
1001788012
1102239012
12525410014
14030211514
17037615516
19043618016
3/4**
20**125
11/4
3211/2
40250
21/2
65380
22032722518
4**100**
Thicknesst*
Nominal Size
Threaded end to endL
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassBronzeNon-asbestos packing
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassBronzeNon-asbestos packing
Dimensions mm
mm
inch
5012660
6014560
6517070
7521390
85244100
95294115
115253135
130283155
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassBronzeNon-asbestos packing
• B is undrilled unless drilling is specified as an option.
Dimensions mm
*Shall not be in accordance with JIS B 2011
mm
inch
85936010
951228010
1101359012
13015710012
15017111514
18019613514
21023215516
24026818016
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
28032322518
4100
Thicknesst*
Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LHD
Dimensions mm
mm
inch
558755
659360
8012280
9013590
105157100
120171115
140196135
180232155
200268180
3/8
10508650
1/4
8
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
Dimensions mm
mm
inch
8051.5
9058.5
10567
12073.5
14086
18097
200108
3/4
206543
1/2
1555
38.5
1/4
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
Threaded end to end
Height, valve open
LH
KITZ BRONZE & BRASS VALVES
JIS 10K BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
Fig. J
Fig. JB
Fig. M
Fig. LB
Fig. O
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeNon-asbestos packing
*Size 1 & larger
14 15
10K BRONZE GLOBE VALVE
JIS 5K BRONZE GATE VALVE
Dimensions mm
mm
inch
5512660
6515370
7017880
8022390
90254100
100302115
1/2
15
3/4
20125
11/4
3211/2
40120260155
21/2
65250
140282180
380
JIS 10K BRONZE GATE VALVE
10K BRONZE GATE VALVE
JIS 10K BRONZE SWING CHECK VALVE
JIS
Sta
nd
ard
JIS S
tan
da
rd
Screwed Bonnet*, Rising Stem,Designed to JIS B2011
Flanged ends to JIS B2011
Nominal Size
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 1.0MPa
Water, non-shock 120ºC (0.7 MPa), Oil & water 120ºC (0.5 MPa), Saturated steam pressure 0.2MPa
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 1.0MPa
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 0.7MPa
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 0.7MPa
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 0.7MPa
Threaded end to endL
Screwed Bonnet, Rising StemDesigned to JIS B2011
Threaded ends to JIS B0203 (also to BS21)
Screwed Bonnet, Swing type discDesigned to JIS B2011, Threadedends to JIS B0203 (also to BS21)
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeNon-asbestos packing
*Size 1 & larger
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassBrassBronze
10K
10K
10K
10K
10K
5K
Screwed Bonnet*, Rising StemDesigned to JIS B2011
Threaded end to JIS B0203 (also to BS21)
Screwed Bonnet*, Rising Stem,Designed to JIS B2011
Flanged end to JIS B2011
Screwed Bonnet, Rising StemDesigned to JIS B2011
Threaded end to JIS B0203 (also to BS21)
Fig. L
Height, valve open
Handwheel diam
HD
Height, valve open
Handwheel diam
HD
*Size 4 : Bolted Bonnet
*Size 3 : Bolted Bonnet
*Size 3 & larger : Bolted Bonnet
H
L
D
H
L
D
H
L
D
H
L
H
L
D
H
D
L
• B is undrilled unless drilling is specified as an option.
Dimensions mm
”t” Shall not be in accordance with JIS B 2011 **3/4 & 4 shall not be in accordance with JIS B2011
mm
inch
901537010
1001788012
1102239012
12525410014
14030211514
17037615516
19043618016
3/4**
20**125
11/4
3211/2
40250
21/2
65380
22032722518
4**100**
Thicknesst*
Nominal Size
Threaded end to endL
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassBronzeNon-asbestos packing
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassBronzeNon-asbestos packing
Dimensions mm
mm
inch
5012660
6014560
6517070
7521390
85244100
95294115
115253135
130283155
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
80Nominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassBronzeNon-asbestos packing
• B is undrilled unless drilling is specified as an option.
Dimensions mm
*Shall not be in accordance with JIS B 2011
mm
inch
85936010
951228010
1101359012
13015710012
15017111514
18019613514
21023215516
24026818016
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
8028032322518
4100
Thicknesst*
Nominal Size
Threaded end to end
Height, valve open
Handwheel diam
LHD
Dimensions mm
mm
inch
558755
659360
8012280
9013590
105157100
120171115
140196135
180232155
200268180
3/8
10508650
1/4
8
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
80Nominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
Dimensions mm
mm
inch
8051.5
9058.5
10567
12073.5
14086
18097
200108
3/4
206543
1/2
1555
38.5
1/4
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
Threaded end to end
Height, valve open
LH
KITZ BRONZE & BRASS VALVES
JIS 10K BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
Fig. J
Fig. JB
Fig. M
Fig. LB
Fig. O
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeNon-asbestos packing
*Size 1 & larger
14 15
10K BRONZE GLOBE VALVE
JIS 5K BRONZE GATE VALVE
Dimensions mm
mm
inch
5512660
6515370
7017880
8022390
90254100
100302115
1/2
15
3/4
20125
11/4
3211/2
40120260155
21/2
65250
140282180
380
JIS 10K BRONZE GATE VALVE
10K BRONZE GATE VALVE
JIS 10K BRONZE SWING CHECK VALVE
JIS
Sta
nd
ard
JIS S
tan
da
rd
Screwed Bonnet*, Rising Stem,Designed to JIS B2011
Flanged ends to JIS B2011
Nominal Size
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 1.0MPa
Water, non-shock 120ºC (0.7 MPa), Oil & water 120ºC (0.5 MPa), Saturated steam pressure 0.2MPa
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 1.0MPa
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 0.7MPa
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 0.7MPa
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 0.7MPa
Threaded end to endL
Screwed Bonnet, Rising StemDesigned to JIS B2011
Threaded ends to JIS B0203 (also to BS21)
Screwed Bonnet, Swing type discDesigned to JIS B2011, Threadedends to JIS B0203 (also to BS21)
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeNon-asbestos packing
*Size 1 & larger
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassBrassBronze
10K
10K
10K
10K
10K
5K
Screwed Bonnet*, Rising StemDesigned to JIS B2011
Threaded end to JIS B0203 (also to BS21)
Screwed Bonnet*, Rising Stem,Designed to JIS B2011
Flanged end to JIS B2011
Screwed Bonnet, Rising StemDesigned to JIS B2011
Threaded end to JIS B0203 (also to BS21)
Fig. L
Height, valve open
Handwheel diam
HD
Height, valve open
Handwheel diam
HD
*Size 4 : Bolted Bonnet
*Size 3 : Bolted Bonnet
*Size 3 & larger : Bolted Bonnet
H
L
HD
F
L
Dimensions mm
mm
inch
54118101
54128121
57135131
64147156
70183187135
76196217150
95224267177
108277330216
250
21/2
65380
144302375240
4100
5125
6150
8200
10250
12300
Nominal Size
Threaded end to end
Height
LH
Handwheel diamDF
Dimensions mm
”t” Shall not be in accordance with JIS B2240
mm
inch
854310
955210
1105912
1306712
1507414
1808614
2109716
24010816
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
28012718
4100
Thicknesst*
Nominal Size
Threaded end to end
Height
LH
KITZ BRONZE & BRASS VALVES
Screwed Bonnet,Swing type disc,
Flanged end to JIS B224010K BRONZE SWING CHECK VALVE
KITZ BRONZE & BRASS VALVES
Fig. OB
• With by-pass
Fig. 10BW
MaterialsParts
BodyBonnetHinge pinDisc
MaterialBronzeBrass/Bronze*BrassBronze
*Size 4 only
MaterialsParts
BodyBonnetStemDisc ADisc B
MaterialBronze + NBRBrassDezincification Resistant BrassBronzePTFE
16 17
10K
10K
Double plateWafer connection JIS 10KBRONZE WAFER TYPE CHECK VALVE
JIS
Sta
nd
ard
JIS S
tan
da
rd
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 0.7MPa
Water, non-shock 80ºC (1.37 MPa), Oil & Gas 80ºC (0.98 MPa)
H
L
D
H
L
D
D
H
L
D
H
L
H
L
D
H
L
D
Dimensions mm
mm
inch
5114970
5617380
6619480
74228100
84274115
98313135
1/2
15
3/4
20125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
4612560
3/8
10
Dimensions mm
mm
inch
5664
15770
6676
18070
6882
21680
7486
25790
84109297100
3/4
20125
11/4
3211/2
405149
13755
1/2
1546
10850
3/8
1545
10850
1/4
15250
Nominal Size
Threaded end to end
Solder
Height, valve open
LL1D
Handwheel diamD
Dimensions mm
mm
inch
5664
15560
6676
18070
6882
21680
7486
25790
84109296100
115
371135
130
432155
3/4
205149
12955
1/2
15125
11/4
3211/2
40250
21/2
65380
Handwheel diamD
Nominal Size
Threaded end to end
Solder
Height, valve open
LL1H
Dimensions
mm
inch
Handwheel diamD
Nominal Size
Threaded end to end
Solder
Height, valve open
LL1H
Dimensions mm
mm
inch
5664
15770
6676
18070
6882
21680
7486
25790
84109296100
120
385155
140
432155
3/4
20125
11/4
3211/2
405149
13755
1/2
15250
21/2
65380
Nominal Size
Threaded end to end
Solder
Height, valve open
LL1D
Handwheel diamD
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeBronze
Flexible graphite& Aluminum
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeCopper-nickel alloy
Flexible graphite& Aluminum
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzePlastic Graphite
Dimensions mm
mm
inch
499855
5311470
6112670
6814580
7417690
84201100
1/2
15
3/4
20125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzePlastic Graphite
KITZ BRONZE & BRASS VALVES
BRONZE GATE VALVE
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzePlastic Graphite
18 19
BRONZE GATE VALVE
BRONZE GATE VALVE
BRONZE GATE VALVE
BRONZE GATE VALVE
Ind
ust
ria
l Ind
ustria
l
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT or solder joint ends.
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT
Screwed Bonnet, Non-rising Stem, Designed to MSS SP-80 Type 1A
Threaded ends to NPT
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 6.89 MPa (1000 psi), Saturated steam pressure 2.07 MPa (300 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
CLASS 150
CLASS 150
CLASS 300
CLASS 125
CLASS 150
• Threaded end toASME B1.20.1
Fig. AK125M• Solder joint end to
ASME B16.18
Fig. C125M• Threaded end to
ASME B1.20.1
Fig. AK150L• Solder joint end to
ASME B16.18
Fig. C150L
• Threaded end toASME B1.20.1
Fig. AK150LU• Solder joint end to
ASME B16.18
Fig. C150LU
Screwed Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT or solder joint ends.
Screwed Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT or solder joint ends.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzePlastic Graphite
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to ASME B1.20.1
Fig. AK150E• Threaded end to ASME B1.20.1
Fig. AK300LU438650
3/8
10
CLASS 125
• Threaded end toASME B1.20.1
Fig. AK125E• Solder joint end to
ASME B16.18
Fig. C125E
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
BRONZE GATE VALVEScrewed Bonnet, Non-rising Stem,
Designed to MSS SP-80 Type 1AThreaded ends to NPT or solder joint ends.
49469355
5360
11060
6171
12670
6479
14580
6888
17090
74108189100
1/2
15
3/4
20125
11/4
3211/2
40250
43398650
3/8
10
H
L
D
H
L
D
D
H
L
D
H
L
H
L
D
H
L
D
Dimensions mm
mm
inch
5114970
5617380
6619480
74228100
84274115
98313135
1/2
15
3/4
20125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
4612560
3/8
10
Dimensions mm
mm
inch
5664
15770
6676
18070
6882
21680
7486
25790
84109297100
3/4
20125
11/4
3211/2
405149
13755
1/2
1546
10850
3/8
1545
10850
1/4
15250
Nominal Size
Threaded end to end
Solder
Height, valve open
LL1D
Handwheel diamD
Dimensions mm
mm
inch
5664
15560
6676
18070
6882
21680
7486
25790
84109296100
115
371135
130
432155
3/4
205149
12955
1/2
151
2511/4
3211/2
402
5021/2
653
80
Handwheel diamD
Nominal Size
Threaded end to end
Solder
Height, valve open
LL1H
Dimensions
mm
inch
Handwheel diamD
Nominal Size
Threaded end to end
Solder
Height, valve open
LL1H
Dimensions mm
mm
inch
5664
15770
6676
18070
6882
21680
7486
25790
84109296100
120
385155
140
432155
3/4
20125
11/4
3211/2
405149
13755
1/2
15250
21/2
65380
Nominal Size
Threaded end to end
Solder
Height, valve open
LL1D
Handwheel diamD
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeBronze
Flexible graphite& Aluminum
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeCopper-nickel alloy
Flexible graphite& Aluminum
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzePlastic Graphite
Dimensions mm
mm
inch
499855
5311470
6112670
6814580
7417690
84201100
1/2
15
3/4
201
2511/4
3211/2
402
50Nominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzePlastic Graphite
KITZ BRONZE & BRASS VALVES
BRONZE GATE VALVE
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzePlastic Graphite
18 19
BRONZE GATE VALVE
BRONZE GATE VALVE
BRONZE GATE VALVE
BRONZE GATE VALVE
Ind
ust
ria
l Ind
ustria
l
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT or solder joint ends.
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT
Screwed Bonnet, Non-rising Stem, Designed to MSS SP-80 Type 1A
Threaded ends to NPT
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 6.89 MPa (1000 psi), Saturated steam pressure 2.07 MPa (300 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
CLASS 150
CLASS 150
CLASS 300
CLASS 125
CLASS 150
• Threaded end toASME B1.20.1
Fig. AK125M• Solder joint end to
ASME B16.18
Fig. C125M• Threaded end to
ASME B1.20.1
Fig. AK150L• Solder joint end to
ASME B16.18
Fig. C150L
• Threaded end toASME B1.20.1
Fig. AK150LU• Solder joint end to
ASME B16.18
Fig. C150LU
Screwed Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT or solder joint ends.
Screwed Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT or solder joint ends.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzePlastic Graphite
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to ASME B1.20.1
Fig. AK150E• Threaded end to ASME B1.20.1
Fig. AK300LU438650
3/8
10
CLASS 125
• Threaded end toASME B1.20.1
Fig. AK125E• Solder joint end to
ASME B16.18
Fig. C125E
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
BRONZE GATE VALVEScrewed Bonnet, Non-rising Stem,
Designed to MSS SP-80 Type 1AThreaded ends to NPT or solder joint ends.
49469355
5360
11060
6171
12670
6479
14580
6888
17090
74108189100
1/2
15
3/4
201
2511/4
3211/2
402
5043398650
3/8
10
H
L
D
H
L
D
H
L
H
L
H
L
D
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassCopperBronze
Dimensions mm
mm
inch
70864947
801055856
951217169
1101378077
1281709592
158194114111
184222131127
3/4
20125
11/4
3211/2
4056674038
1/2
15250
21/2
65380
Nominal Size
Threaded end to end
Solder
Height
LL1H
SolderH
Dimensions mm
mm
inch
65849870
7710010880
8511513790
100130160100
119155180115
150192202135
178232246155
3/4
20125
11/4
3211/2
4053647660
1/2
15250
21/2
65380
Nominal Size
Threaded end to end
Solder
Height, valve open
LL1H
Handwheel diamD
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeReinfoced PTFE
Flexible graphite& aluminum
Dimensions mm
mm
inch
7895
13690
90112149100
105126173115
120145182115
145180209135
170205247155
200244275180
3/4
205561
10960
3/8
106472
11670
1/2
155358
10960
1/4
8125
11/4
3211/2
40250
21/2
65380
245312298225
4100
Handwheel diamD
Nominal Size
Threaded end to end
Solder
Height, valve open
LL1H
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassCopperBronze
KITZ BRONZE & BRASS VALVES
BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeReinfoced PTFEPlastic Graphite
20 21
BRONZE GLOBE VALVE
BRONZE Y-PATTERN SWING CHECK VALVE
BRONZE Y-PATTERN SWING CHECK VALVE
Ind
ust
ria
l Ind
ustria
l
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi) W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 2.07 MPa (300 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*BronzeBronzePlastic Graphite
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzeFlexible Graphite & Aluminum
CLASS 150
CLASS 150
CLASS 300
CLASS 125
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded end to NPT
Union Bonnet*, Rising Stem, Designed to MSS SP-80 Type 2Threaded end to NPT or solder joint ends.
Screwed cap, Swing type disc,Designed to MSS SP-80 Type 3
Threaded ends to NPT orsolder joint ends.
Screwed cap, Swing type disc,Designed to MSS SP-80 Type 3
Threaded ends to NPT orsolder joint ends.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to ASME B1.20.1
Fig. AK300D
• Threaded end to ASME B1.20.1
Fig. AK300J
Dimensions mm
mm
inch
5511360
6412680
7813990
90157100
105187115
120192135
145221155
1/2
15
3/4
20
3/8
1053
11360
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
Dimensions mm
mm
inch
5511360
6412680
7813990
90159100
105187115
120195135
145224155
1/2
15
3/4
20
3/8
1053
11360
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
• Threaded end to ASME B1.20.1
Fig. AKYR• Solder joint end to
ASME B16.18
Fig. CYR• Threaded end to
ASME B1.20.1
Fig. AK150D• Solder joint end to
ASME B16.18
Fig. C150D
• Threaded end toASME B1.20.1
Fig. AK150YR• Solder joint end to
ASME B16.18
Fig. C150YR
Dimensions mm
mm
inch
728649
8410558
9912170
11313779
13117095
162194114
186222132
3/4
20606739
1/2
15546139
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
Threaded end to end
Solder
Height
LL1H
*Size 21/2 and larger = Bolted bonnet
CLASS 125
• Threaded end toASME B1.20.1
Fig. AK125C• Solder joint end to
ASME B16.18
Fig. C125C
CLASS 300
BRONZE GLOBE VALVE
BRONZE GLOBE VALVE
*Size 21/2 & 3
Screwed Bonnet, Rising Stem, Designed to MSS SP-80 Type 1Threaded ends to NPT or solder joint ends.
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 1Threaded ends to NPT
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 2.07 MPa (300 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
D
H
L
H
L
D
H
L
D
H
L
H
L
H
L
D
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassCopperBronze
Dimensions mm
mm
inch
70864947
801055856
951217169
1101378077
1281709592
158194114111
184222131127
3/4
20125
11/4
3211/2
4056674038
1/2
15250
21/2
65380
Nominal Size
Threaded end to end
Solder
Height
LL1H
SolderH
Dimensions mm
mm
inch
65849870
7710010880
8511513790
100130160100
119155180115
150192202135
178232246155
3/4
201
2511/4
3211/2
4053647660
1/2
152
5021/2
653
80Nominal Size
Threaded end to end
Solder
Height, valve open
LL1H
Handwheel diamD
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeReinfoced PTFE
Flexible graphite& aluminum
Dimensions mm
mm
inch
7895
13690
90112149100
105126173115
120145182115
145180209135
170205247155
200244275180
3/4
205561
10960
3/8
106472
11670
1/2
155358
10960
1/4
81
2511/4
3211/2
402
5021/2
653
80245312298225
4100
Handwheel diamD
Nominal Size
Threaded end to end
Solder
Height, valve open
LL1H
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassCopperBronze
KITZ BRONZE & BRASS VALVES
BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeReinfoced PTFEPlastic Graphite
20 21
BRONZE GLOBE VALVE
BRONZE Y-PATTERN SWING CHECK VALVE
BRONZE Y-PATTERN SWING CHECK VALVE
Ind
ust
ria
l Ind
ustria
l
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi) W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 2.07 MPa (300 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*BronzeBronzePlastic Graphite
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzeFlexible Graphite & Aluminum
CLASS 150
CLASS 150
CLASS 300
CLASS 125
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded end to NPT
Union Bonnet*, Rising Stem, Designed to MSS SP-80 Type 2Threaded end to NPT or solder joint ends.
Screwed cap, Swing type disc,Designed to MSS SP-80 Type 3
Threaded ends to NPT orsolder joint ends.
Screwed cap, Swing type disc,Designed to MSS SP-80 Type 3
Threaded ends to NPT orsolder joint ends.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to ASME B1.20.1
Fig. AK300D
• Threaded end to ASME B1.20.1
Fig. AK300J
Dimensions mm
mm
inch
5511360
6412680
7813990
90157100
105187115
120192135
145221155
1/2
15
3/4
20
3/8
1053
11360
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
Dimensions mm
mm
inch
5511360
6412680
7813990
90159100
105187115
120195135
145224155
1/2
15
3/4
20
3/8
1053
11360
1/4
81
2511/4
3211/2
402
50Nominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
• Threaded end to ASME B1.20.1
Fig. AKYR• Solder joint end to
ASME B16.18
Fig. CYR• Threaded end to
ASME B1.20.1
Fig. AK150D• Solder joint end to
ASME B16.18
Fig. C150D
• Threaded end toASME B1.20.1
Fig. AK150YR• Solder joint end to
ASME B16.18
Fig. C150YR
Dimensions mm
mm
inch
728649
8410558
9912170
11313779
13117095
162194114
186222132
3/4
20606739
1/2
15546139
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
Threaded end to end
Solder
Height
LL1H
*Size 21/2 and larger = Bolted bonnet
CLASS 125
• Threaded end toASME B1.20.1
Fig. AK125C• Solder joint end to
ASME B16.18
Fig. C125C
CLASS 300
BRONZE GLOBE VALVE
BRONZE GLOBE VALVE
*Size 21/2 & 3
Screwed Bonnet, Rising Stem, Designed to MSS SP-80 Type 1Threaded ends to NPT or solder joint ends.
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 1Threaded ends to NPT
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 2.07 MPa (300 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
D
H
L
H
L
H
L
D
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBronzeCopperBronze
Dimensions mm
mm
inchNominal Size
Threaded end to end
Handwheel diam
LHeight, valve openH
D
MaterialsParts
BodyBonnetStemDisc
Gland Packing
Material AS DesignationBrassBrassBrassBrass
Plastic Graphite
AS 2345AS 2345AS 2345AS 2345Asbestos freepacking
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
22 23
BRONZE Y-PATTERN SWING CHECK VALVE
BRASS GATE VALVE AS 1628
Ind
ust
ria
l Ind
ustria
l
Screwed cap, Swing type disc,Designed to MSS SP-80 Type 3
Threaded ends to NPT
Screwed Bonnet, Non-rising Stem,Designed to AS 1628-2001
Threaded ends to AS 1722.1
Working temperature and pressure, non-shock 99ºC /1.6 MPa
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 2.07 MPa (300 psi)
CLASS 300
PN16
• Australian Standard AS 1628 Lic No WMKA02054
Fig. AS-FH
• Solder joint end to ASME B1.20.1
Fig. AK300YR
Dimensions mm
mm
inchNominal Size
Threaded end to end
Height, valve open
LH
6042
7251
8461
9974
11383
13198
1/2
15
3/4
20125
11/4
3211/2
40250
557450
608655
689460
7811670
8112880
9415890
1/2
15
3/4
20125
11/4
3211/2
40250
H
D
L
Mounting Pad Up to size 2
Mounting Pad Size 21/2 and larger
D
H
L
D
H
L
D
H
L
Mounting Pad Up to size 2
Mounting Pad Size 21/2 and larger
Dimensions mm
mm
inch
423981
534281
6051
100
7259
130
8264
130
9273
150
10580
150
1/2
15
3/4
20
3/8
10413981
1/4
8125
11/4
3211/2
40135108200
21/2
65250
156122300
380
192140300
4100
Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
Dimensions mm
mm
inch
423982
534282
6052
100
7259
130
8265
130
9274
150
10581
150
1/2
15
3/4
20
3/8
10413982
1/4
8125
11/4
3211/2
40135109200
21/2
65250
156123300
380
192141300
4100
Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
Dimensions mm
mm
inch
42463982
53544282
607351
100
728858
130
8210064
130
9211573
150
10514080
150
1/2
15
3/4
20
3/8
1041
3982
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
LSolderL1HeightH
D
MaterialsParts
BodyBody capStemBall
Ball seatGland Packing
MaterialBrass/Bronze*Brass/Bronze*Stainless Steel (type 316)Stainless Steel(type 316 or Gr. CF8M)Reinforced PTFEReinforced PTFE
MaterialsParts
BodyBody capStem
Ball
Ball seatGland Packing
MaterialBrassBrassStainless Steel (type 316)Stainless Steel (type 316 or Gr. CF8M)PTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEPTFE
Dimensions mm
mm
inch
7351
100
8859
130
10064
130
11573
150
14080
150
163108198
187122300
3/4
20544282
1/2
15463982
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
Threaded end to end
Height
Length of Handle
LHD
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFENBR, FKM
Dimensions mm
mm
inch
607347
100
728855
130
8210059
130
9211567
150
10514075
150
3/4
20125
11/4
3211/2
4053543982
1/2
1542
3582
3/8
1041
3582
1/4
8250
Nominal Size
Threaded end to end
Solder
Height
LL1H
Length of HandleD
KITZ BRONZE & BRASS VALVES
BRASS BALL VALVE, FULL PORT
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass (chrome free plated)PTFEPTFE
24 25
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)Maximum pressure temperature limitation: 150 psi at 300ºF
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.72 MPa (250 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
MaterialsParts
BodyBody capStemBall
Ball seatGland Packing
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass** (Size 21/2, 3)Brass (chrome free plated (Size 3/8 to 2))
PTFEPTFE
TYPE 600
TYPE 600
TYPE 600
TYPE 600
TYPE 600
TYPE 600
Screwed body cap, Blowout-proof StemSolder joint ends to ASME B16.18
Screwed body cap, Blowout-proof StemThreaded ends to ASME B1.20.1
Screwed body cap, Blowout-proof stem.Double O-ring stem seals
Threaded ends to NPT or solder joint ends.
250 WSP Steam trim, Mounting padScrewed body cap, Blowout-proof stem.
Threaded ends to ASME B1.20.1
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Dimensions mm
mm
inch
423982
534282
6051
100
7259
130
8264
130
9273
150
10580
150
1/2
15
3/4
20
3/8
10413982
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
• Threaded end toASME B1.20.1
Fig. AKTFLL• Solder joint end to
ASME B16.18
Fig. CTFLL
• Threaded end toASME B1.20.1
Fig. AKTAFM• Solder joint end to
ASME B16.18
Fig. CTAFMFig. AKTAF
*Size 21/2 & 3
Stainless steel trimScrewed body cap, Blowout-proof Stem
Threaded ends to NPT or solder joint ends.
Mounting padScrewed body cap, Blowout-proof Stem
Threaded ends to ASME B1.20.1
• Threaded end to ASME B1.20.1
Fig. AKTAFP• Threaded end to ASME B1.20.1
Fig. AKTAFPM• Threaded end to ASME B1.20.1
Fig. CTAF• Solder joint end to ASME B16.18
*Size 21/2 and larger**Chrome or Nickel-chrome plated
*Size 21/2 and larger
Approvals(up to 2)
Approvals
UL
Approvals(up to 2)
UL
AKTFLL only
FM
Approvals(up to 2)
*AKTAFM only
(up to 2)
Approvals
UL(up to 2)
Approvals(up to 2)
CSA (US/C)NSF/ANSI61-8 UL FM
NSF/ANSI61-8
UL
*
NSF/ANSI61-8
CSA (US/C)
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
*Chrome or Nickel-chrome plated
**Chrome or Nickel-chrome plated
CSA (US/C)
*
H
D
L L
D
H
H
D
L
Mounting Pad Up to size 2
Mounting Pad Size 21/2 and larger
D
H
L
D
H
L
D
H
L
Mounting Pad Up to size 2
Mounting Pad Size 21/2 and larger
Dimensions mm
mm
inch
423981
534281
6051
100
7259
130
8264
130
9273
150
10580
150
1/2
15
3/4
20
3/8
10413981
1/4
8125
11/4
3211/2
40135108200
21/2
65250
156122300
380
192140300
4100
Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
Dimensions mm
mm
inch
423982
534282
6052
100
7259
130
8265
130
9274
150
10581
150
1/2
15
3/4
20
3/8
10413982
1/4
8125
11/4
3211/2
40135109200
21/2
65250
156123300
380
192141300
4100
Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
Dimensions mm
mm
inch
42463982
53544282
607351
100
728858
130
8210064
130
9211573
150
10514080
150
1/2
15
3/4
20
3/8
1041
3982
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
LSolderL1HeightH
D
MaterialsParts
BodyBody capStemBall
Ball seatGland Packing
MaterialBrass/Bronze*Brass/Bronze*Stainless Steel (type 316)Stainless Steel(type 316 or Gr. CF8M)Reinforced PTFEReinforced PTFE
MaterialsParts
BodyBody capStem
Ball
Ball seatGland Packing
MaterialBrassBrassStainless Steel (type 316)Stainless Steel (type 316 or Gr. CF8M)PTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEPTFE
Dimensions mm
mm
inch
7351
100
8859
130
10064
130
11573
150
14080
150
163108198
187122300
3/4
20544282
1/2
15463982
3/8
101
2511/4
3211/2
402
5021/2
653
80Nominal Size
Threaded end to end
Height
Length of Handle
LHD
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFENBR, FKM
Dimensions mm
mm
inch
607347
100
728855
130
8210059
130
9211567
150
10514075
150
3/4
201
2511/4
3211/2
4053543982
1/2
1542
3582
3/8
1041
3582
1/4
82
50Nominal Size
Threaded end to end
Solder
Height
LL1H
Length of HandleD
KITZ BRONZE & BRASS VALVES
BRASS BALL VALVE, FULL PORT
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass (chrome free plated)PTFEPTFE
24 25
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)Maximum pressure temperature limitation: 150 psi at 300ºF
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.72 MPa (250 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
MaterialsParts
BodyBody capStemBall
Ball seatGland Packing
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass** (Size 21/2, 3)Brass (chrome free plated (Size 3/8 to 2))
PTFEPTFE
TYPE 600
TYPE 600
TYPE 600
TYPE 600
TYPE 600
TYPE 600
Screwed body cap, Blowout-proof StemSolder joint ends to ASME B16.18
Screwed body cap, Blowout-proof StemThreaded ends to ASME B1.20.1
Screwed body cap, Blowout-proof stem.Double O-ring stem seals
Threaded ends to NPT or solder joint ends.
250 WSP Steam trim, Mounting padScrewed body cap, Blowout-proof stem.
Threaded ends to ASME B1.20.1
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Dimensions mm
mm
inch
423982
534282
6051
100
7259
130
8264
130
9273
150
10580
150
1/2
15
3/4
20
3/8
10413982
1/4
81
2511/4
3211/2
402
50Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
• Threaded end toASME B1.20.1
Fig. AKTFLL• Solder joint end to
ASME B16.18
Fig. CTFLL
• Threaded end toASME B1.20.1
Fig. AKTAFM• Solder joint end to
ASME B16.18
Fig. CTAFMFig. AKTAF
*Size 21/2 & 3
Stainless steel trimScrewed body cap, Blowout-proof Stem
Threaded ends to NPT or solder joint ends.
Mounting padScrewed body cap, Blowout-proof Stem
Threaded ends to ASME B1.20.1
• Threaded end to ASME B1.20.1
Fig. AKTAFP• Threaded end to ASME B1.20.1
Fig. AKTAFPM• Threaded end to ASME B1.20.1
Fig. CTAF• Solder joint end to ASME B16.18
*Size 21/2 and larger**Chrome or Nickel-chrome plated
*Size 21/2 and larger
Approvals(up to 2)
Approvals
UL
Approvals(up to 2)
UL
AKTFLL only
FM
Approvals(up to 2)
*AKTAFM only
(up to 2)
Approvals
UL(up to 2)
Approvals(up to 2)
CSA (US/C)NSF/ANSI61-8 UL FM
NSF/ANSI61-8
UL
*
NSF/ANSI61-8
CSA (US/C)
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
*Chrome or Nickel-chrome plated
**Chrome or Nickel-chrome plated
CSA (US/C)
*
H
D
L L
D
H
D
H
D
LL1
d2d3
H
D
L
H
L
D
H
LE
D
H
L
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEPTFE
Dimensions mm
mm
inch
523982
634282
7551
100
8859
130
9864
130
11373
150
12680
150
1/2
15
3/4
20
3/8
10523982
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
Dimensions mm
mm
inch
42394.181
53424.181
60514.1100
72594.1130
82644.1130
92734.1150
105804.1150
1/2
15
3/4
20
3/8
1041394.181
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
LHeightHExhoust holeE
D
Dimensions mm
mm
inch
74754282
NPT 1/23/4-11.5 NHR
849051
100NPT 1/2
3/4-11.5 NHR
1/2
15
3/4
20Nominal Size
Threaded end to end
Length of Handle
LSolderL1HeightH
DThreadedd2Hosed3
Dimensions mm
mm
inch
55544282
627351
100
738859
130
1/2
15
3/4
20125
Nominal Size
Threaded end to end
Length of Handle
LSolderL1HeightH
D
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEPTFE
KITZ BRONZE & BRASS VALVES
BRASS BALL VALVE, FULL PORT
KITZ BRONZE & BRASS VALVES
26 27
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
Ba
ll V
alv
es B
all V
alv
es
Safety exhaust, Screwed body cap,Blowout-proof stem, Latch lock handle
Threaded ends to ASME B1.20.1
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi)
TYPE 600
TYPE 200
TYPE 600
TYPE 600
TYPE 600
Drainable, Screwed body cap,Blowout-proof Stem, Drain portThreaded ends to ASME B1.20.1
Single union, Screwed body cap,Blowout-proof Stem,
Threaded ends to ASME B1.20.1
Threaded end 3/4 Hose connectionwith cap & chain, Blowout-proof stem,
Threaded/Hose connection(ASME B1.20.1/ASME B1.20.7 3/4 11.5NHR)
Screwed body cap,Blowout-proof Stem, Male & Female,
Threaded ends to ASME B1.20.1
Dimensions mm
mm
inch
533982
664282
7351
100
8859
130
1/2
15
3/4
20
3/8
10523982
1/4
8125
Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
● Exhaust hole diameter : 4.1mm (all nominal size)
Fig. AKTAFO• Threaded end to ASME B1.20.1
Fig. AKTAFU• Threaded end to ASME B1.20.1
Fig. AKTAFS• Threaded end to ASME B1.20.1
• Threaded end toASME B1.20.1
Fig. AKTAFC• Solder joint end to
ASME B16.18
Fig. CTAFC
• Threaded end toASME B1.20.1
Fig. AKTAFD• Solder joint end to
ASME B16.18
Fig. CTAFD
*Chrome or Nickel-chrome plated *Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
D
H
D
LL1
d2d3
H
D
L
H
L
D
H
LE
D
H
L
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEPTFE
Dimensions mm
mm
inch
523982
634282
7551
100
8859
130
9864
130
11373
150
12680
150
1/2
15
3/4
20
3/8
10523982
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
Dimensions mm
mm
inch
42394.181
53424.181
60514.1100
72594.1130
82644.1130
92734.1150
105804.1150
1/2
15
3/4
20
3/8
1041394.181
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
LHeightHExhoust holeE
D
Dimensions mm
mm
inch
74754282
NPT 1/23/4-11.5 NHR
849051
100NPT 1/2
3/4-11.5 NHR
1/2
15
3/4
20Nominal Size
Threaded end to end
Length of Handle
LSolderL1HeightH
DThreadedd2Hosed3
Dimensions mm
mm
inch
55544282
627351
100
738859
130
1/2
15
3/4
201
25Nominal Size
Threaded end to end
Length of Handle
LSolderL1HeightH
D
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEPTFE
KITZ BRONZE & BRASS VALVES
BRASS BALL VALVE, FULL PORT
KITZ BRONZE & BRASS VALVES
26 27
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
Ba
ll V
alv
es B
all V
alv
es
Safety exhaust, Screwed body cap,Blowout-proof stem, Latch lock handle
Threaded ends to ASME B1.20.1
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi)
TYPE 600
TYPE 200
TYPE 600
TYPE 600
TYPE 600
Drainable, Screwed body cap,Blowout-proof Stem, Drain portThreaded ends to ASME B1.20.1
Single union, Screwed body cap,Blowout-proof Stem,
Threaded ends to ASME B1.20.1
Threaded end 3/4 Hose connectionwith cap & chain, Blowout-proof stem,
Threaded/Hose connection(ASME B1.20.1/ASME B1.20.7 3/4 11.5NHR)
Screwed body cap,Blowout-proof Stem, Male & Female,
Threaded ends to ASME B1.20.1
Dimensions mm
mm
inch
533982
664282
7351
100
8859
130
1/2
15
3/4
20
3/8
10523982
1/4
81
25Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
● Exhaust hole diameter : 4.1mm (all nominal size)
Fig. AKTAFO• Threaded end to ASME B1.20.1
Fig. AKTAFU• Threaded end to ASME B1.20.1
Fig. AKTAFS• Threaded end to ASME B1.20.1
• Threaded end toASME B1.20.1
Fig. AKTAFC• Solder joint end to
ASME B16.18
Fig. CTAFC
• Threaded end toASME B1.20.1
Fig. AKTAFD• Solder joint end to
ASME B16.18
Fig. CTAFD
*Chrome or Nickel-chrome plated *Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
H
D
L
H
L
D
H H
D D
L L
H
L
D
H
D
L
H
D
L
H
D
L
Dimensions mm
mm
inch
684980
8055
110
8660
110
10165
110
11775
140
13691
200
160105300
3/4
20604580
1/2
15564560
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
Threaded end to end
Height
Length of Handle
LHD
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
56.53555
714169
1/2
15392535
1/4
8442940
3/8
10322535
1/8
6125
593955
3/4
20
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrassBrassDezincification Resistant BrassBrass*Reinforced PTFEReinforced PTFE
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrassBrassDezincification Resistant BrassBrass*Reinforced PTFEReinforced PTFE
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
744580
805080
9455
110
1/2
15604560
3/8
10594560
1/4
8
3/4
20125
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
Dimensions mm
mm
inch
6850488080
795555
11090
866061
110105
966566
110105
1097580
140120
12791
200
153105
300
3/4
205045416065
3/8
106545448080
1/2
155045416065
1/4
8125
11/4
3211/2
40250
21/2
65380
179124
400
4100
TT: Length of HandleD1
Nominal Size
Threaded end to end
Height
TT: Height
LHH1
Length of HandleD
*TT: 1/4 to 2
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEFKM
*Size 4 only**Nickel-chrome plated
Dimensions mm
mm
inch
6373484880
3/4
204547414160
3/8
105654454580
1/2
154447414160
1/4
874885454
110
125
82985858
110
11/4
3291
1136363
110
11/2
401041357474
140
250
1271479189
200
21/2
65153177105103300
380
Length of HandleD
Nominal Size
Threaded end to end
Solder
Height
LL1H
Height solderH1
KITZ BRONZE & BRASS VALVES
BRASS BALL VALVE
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
28 29
BRASS BALL VALVE
BRASS BALL VALVE
BRASS BALL VALVE
BRASS BALL VALVE
BRASS BALL VALVE
Ba
ll V
alv
es B
all V
alv
es
CTH W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC non-shock 0.69 MPa (100 psi)TH W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC non-shock 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
TYPE 600
TYPE 400
TYPE 600
TYPE 400/600
TYPE 400
TYPE 400
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21 or solder joint ends.
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21 or NPT
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Male & Female Threaded ends to BS21
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to BS21
Fig. TO
• Threaded end to BS21
Fig. TH• Solder joint end to
ASME B16.18
Fig. CTH
• Threaded end to BS21
Fig. T
• Threaded end to ASME B1.20.1
Fig. AKT
• Threaded end to BS21
Fig. TT• Threaded end to BS21
Fig. TK
• Threaded end to ASME B1.20.1• AKTK 1/4 to 2
Fig. AKTK
• Threaded end to BS21
Fig. TKT
• Threaded end to BS21
Fig. TM
• Threaded end to BS21
Fig. TKW
Dimensions mm
mm
inch
4436277040
56.541318560
5944348560
714842
10076
785448
10076
836553
125100
1007260
125100
3/4
20
3/8
103931236035
1/2
153231236035
1/8
6
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Height
TKT: Height
LHH1
Length of HandleDTKT: Length of HandleD1
*TH: 1/4 to 2
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals, Threaded ends to BS21
One-piece body, Blowout-proof Stem,Threaded ends to BS21 or NPT
One-piece body, Blowout-proof Stem, with Wing handleThreaded ends to BS21 or NPT
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated*Nickel-chrome plated
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
H
D
L
H
L
D
H H
D D
L L
H
L
D
H
D
L
H
D
L
H
D
L
Dimensions mm
mm
inch
684980
8055
110
8660
110
10165
110
11775
140
13691
200
160105300
3/4
20604580
1/2
15564560
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
Threaded end to end
Height
Length of Handle
LHD
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
56.53555
714169
1/2
15392535
1/4
8442940
3/8
10322535
1/8
6125
593955
3/4
20
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrassBrassDezincification Resistant BrassBrass*Reinforced PTFEReinforced PTFE
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrassBrassDezincification Resistant BrassBrass*Reinforced PTFEReinforced PTFE
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
744580
805080
9455
110
1/2
15604560
3/8
10594560
1/4
8
3/4
201
25
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
Dimensions mm
mm
inch
6850488080
795555
11090
866061
110105
966566
110105
1097580
140120
12791
200
153105
300
3/4
205045416065
3/8
106545448080
1/2
155045416065
1/4
81
2511/4
3211/2
402
5021/2
653
80179124
400
4100
TT: Length of HandleD1
Nominal Size
Threaded end to end
Height
TT: Height
LHH1
Length of HandleD
*TT: 1/4 to 2
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEFKM
*Size 4 only**Nickel-chrome plated
Dimensions mm
mm
inch
6373484880
3/4
204547414160
3/8
105654454580
1/2
154447414160
1/4
874885454
110
125
82985858
110
11/4
3291
1136363
110
11/2
401041357474
140
250
1271479189
200
21/2
65153177105103300
380
Length of HandleD
Nominal Size
Threaded end to end
Solder
Height
LL1H
Height solderH1
KITZ BRONZE & BRASS VALVES
BRASS BALL VALVE
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
28 29
BRASS BALL VALVE
BRASS BALL VALVE
BRASS BALL VALVE
BRASS BALL VALVE
BRASS BALL VALVE
Ba
ll V
alv
es B
all V
alv
es
CTH W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC non-shock 0.69 MPa (100 psi)TH W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC non-shock 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
TYPE 600
TYPE 400
TYPE 600
TYPE 400/600
TYPE 400
TYPE 400
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21 or solder joint ends.
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21 or NPT
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Male & Female Threaded ends to BS21
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to BS21
Fig. TO
• Threaded end to BS21
Fig. TH• Solder joint end to
ASME B16.18
Fig. CTH
• Threaded end to BS21
Fig. T
• Threaded end to ASME B1.20.1
Fig. AKT
• Threaded end to BS21
Fig. TT• Threaded end to BS21
Fig. TK
• Threaded end to ASME B1.20.1• AKTK 1/4 to 2
Fig. AKTK
• Threaded end to BS21
Fig. TKT
• Threaded end to BS21
Fig. TM
• Threaded end to BS21
Fig. TKW
Dimensions mm
mm
inch
4436277040
56.541318560
5944348560
714842
10076
785448
10076
836553
125100
1007260
125100
3/4
20
3/8
103931236035
1/2
153231236035
1/8
6
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Height
TKT: Height
LHH1
Length of HandleDTKT: Length of HandleD1
*TH: 1/4 to 2
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals, Threaded ends to BS21
One-piece body, Blowout-proof Stem,Threaded ends to BS21 or NPT
One-piece body, Blowout-proof Stem, with Wing handleThreaded ends to BS21 or NPT
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated*Nickel-chrome plated
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
H
L
D
H
L
D
H
LL1
D
D
H
L
D
H
L
H
L
D
L
D
H1
Dimensions mm
mm
inch
90.589.57982
103.5107.5
8382
1191249094
1/2
15
3/4
20125
Nominal Size
Threaded end to end
Length of Handle
LSolderL1HeightH
D
Dimensions mm
mm
inch
12088
130
13095
160
140100160
165115230
180122230
190153400
200162400
3/4
2011085
130
1/2
15125
11/4
3211/2
40250
21/2
65380
230190460
4100
Nominal Size
Threaded end to end
Height
Length of Handle
LHD
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
625365
735865
856790
987290
10890
110
12498.5110
1/2
15
3/4
20125
11/4
3211/2
40250
Dimensions mm
mm
inchNominal Size
Threaded end to end
Height: TLT
L
HeightHSolderL1
H1Length of Handle: TL & CTLDLength of Handle: TLTD
565875798082
657379838082
78888390
11094
869998
10511094
9611410210911094
109135109124140120
1/2
15
3/4
20125
11/4
3211/2
40250
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
624880
7354
110
8558
110
9864
110
10875
140
12484
150
1/2
15
3/4
20125
11/4
3211/2
40250
TL, CTL W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi), TLT W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 80ºC 1.96 MPa (286 psi)
TYPE 400W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi) W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 80ºC 1.96 MPa (286 psi)
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassStainless Steel (Type 304)PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBronzeBronzeDezincification Resistant BrassBrass**/ Stainless Steel*PTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassStainless Steel (Type 304)PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEFKM
*Size 2 only**Nickel-chrome plated
*Size 4 only**Chrome or Nickel-chrome plated
*Size 2 only**Nickel-chrome plated
KITZ BRONZE & BRASS VALVES
BRASS BALL VALVE, FULL PORT
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEFKM
30 31
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE
BRONZE BALL VALVE
BRONZE BALL VALVE
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi) W.O.G. non-shock 1.37 MPa (14kgf/cm2), W.O.G. 150ºC 0.68 MPa (7kgf/cm2)
10K
TYPE 400
TYPE 400
TYPE 400
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21
Locking device, Screwed body cap,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded end to BS21 or solder joint end
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end toBS21
Fig. TL• Solder joint end to
ASME B16.18
Fig. CTL• Threaded end to
BS21
Fig. TLT
• Flanged ends to JIS 10K
Fig. TB
• Threaded end to BS21
Fig. TF
• Threaded end to BS21
Fig. TFJ
Single union, Screwed body and cap,Blowout-proof stem, Double O-ring stem seals,
Threaded ends to BS21 or solder joint ends
Bolted body cap, Full boreFringed ends to JIS B2240 10K
Dimensions mm
mm
inch
707355
100
838863
130
999969
130
11711778
150
13913985
150
167167108200
3/4
2049493982
3/8
1061614882
1/2
1549
3982
1/4
8125
11/4
3211/2
40250
21/2
65Nominal Size
Threaded end to end
Height
Length of Handle
LSolderL1
HD
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrass/Bronze*BrassDezincification Resistant BrassBrass (chrome free plated)PTFEPTFE
*Size 21/2 only
BRASS BALL VALVE, FULL PORTW.O.G. non-shock 2.76 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
TYPE 600Three piece body with Mounting pad
Threaded end to ASME B1.20.1Solder jointed to ASME B16.18
• Threaded end to BS21
Fig. TLTU• Solder joint end to
ASME B16.18
Fig. CTLTU
*C3TM 3/8 to 21/2
• Threaded end toASME B1.20.1
Fig. AK3TM• Solder joint end to
ASME B16.18
Fig. C3TM*
Approvals(up to 2)
NSF/ANSI61-8
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
H
L
D
H
L
D
H
LL1
D
D
H
L
D
H
L
H
L
D
L
D
H1
Dimensions mm
mm
inch
90.589.57982
103.5107.5
8382
1191249094
1/2
15
3/4
20125
Nominal Size
Threaded end to end
Length of Handle
LSolderL1HeightH
D
Dimensions mm
mm
inch
12088
130
13095
160
140100160
165115230
180122230
190153400
200162400
3/4
2011085
130
1/2
15125
11/4
3211/2
40250
21/2
65380
230190460
4100
Nominal Size
Threaded end to end
Height
Length of Handle
LHD
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
625365
735865
856790
987290
10890
110
12498.5110
1/2
15
3/4
201
2511/4
3211/2
402
50
Dimensions mm
mm
inchNominal Size
Threaded end to end
Height: TLT
L
HeightHSolderL1
H1Length of Handle: TL & CTLDLength of Handle: TLTD
565875798082
657379838082
78888390
11094
869998
10511094
9611410210911094
109135109124140120
1/2
15
3/4
201
2511/4
3211/2
402
50
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
624880
7354
110
8558
110
9864
110
10875
140
12484
150
1/2
15
3/4
201
2511/4
3211/2
402
50
TL, CTL W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi), TLT W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 80ºC 1.96 MPa (286 psi)
TYPE 400W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi) W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 80ºC 1.96 MPa (286 psi)
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassStainless Steel (Type 304)PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBronzeBronzeDezincification Resistant BrassBrass**/ Stainless Steel*PTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassStainless Steel (Type 304)PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEFKM
*Size 2 only**Nickel-chrome plated
*Size 4 only**Chrome or Nickel-chrome plated
*Size 2 only**Nickel-chrome plated
KITZ BRONZE & BRASS VALVES
BRASS BALL VALVE, FULL PORT
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEFKM
30 31
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE
BRONZE BALL VALVE
BRONZE BALL VALVE
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi) W.O.G. non-shock 1.37 MPa (14kgf/cm2), W.O.G. 150ºC 0.68 MPa (7kgf/cm2)
10K
TYPE 400
TYPE 400
TYPE 400
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21
Locking device, Screwed body cap,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded end to BS21 or solder joint end
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end toBS21
Fig. TL• Solder joint end to
ASME B16.18
Fig. CTL• Threaded end to
BS21
Fig. TLT
• Flanged ends to JIS 10K
Fig. TB
• Threaded end to BS21
Fig. TF
• Threaded end to BS21
Fig. TFJ
Single union, Screwed body and cap,Blowout-proof stem, Double O-ring stem seals,
Threaded ends to BS21 or solder joint ends
Bolted body cap, Full boreFringed ends to JIS B2240 10K
Dimensions mm
mm
inch
707355
100
838863
130
999969
130
11711778
150
13913985
150
167167108200
3/4
2049493982
3/8
1061614882
1/2
1549
3982
1/4
8125
11/4
3211/2
40250
21/2
65Nominal Size
Threaded end to end
Height
Length of Handle
LSolderL1
HD
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrass/Bronze*BrassDezincification Resistant BrassBrass (chrome free plated)PTFEPTFE
*Size 21/2 only
BRASS BALL VALVE, FULL PORTW.O.G. non-shock 2.76 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
TYPE 600Three piece body with Mounting pad
Threaded end to ASME B1.20.1Solder jointed to ASME B16.18
• Threaded end to BS21
Fig. TLTU• Solder joint end to
ASME B16.18
Fig. CTLTU
*C3TM 3/8 to 21/2
• Threaded end toASME B1.20.1
Fig. AK3TM• Solder joint end to
ASME B16.18
Fig. C3TM*
Approvals(up to 2)
NSF/ANSI61-8
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
D
H
L
H
D
L
H
D
L
L
H
D
L
H
D
L
D
H
Dimensions mm
mm
inch
4246353555
5354414170
6073454570
72885454
100
841005959
100
921157575
130
1101418282
130
1/2
15
3/4
20
3/8
1042
34
55
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
L
HeightH
D
Dimensions mm
mm
inch
4246373770
5354404080
6073434480
72885050
110
841005555
110
921156565
150
1101407272
150
1/2
15138164100100200
65
3/4
20
3/8
1042
37
70
1/4
8125
11/4
3211/2 21/2
40250
167187112112300
380
193
131
300
4100
Nominal Size
Threaded end to end
Length of Handle
L
HeightH
D
Dimensions mm
mm
inch
423670
524080
604380
7250
110
8454
110
9264
150
11072
150
1/2
15
3/4
20
3/8
10423670
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
LHeightH
SolderL1
SolderH1
SolderL1
SolderH1
D
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
804480
9450
110
3/4
20603770
3/8
10744080
1/2
15593770
1/4
8125
Dimensions mm
mm
inch
423555
524170
604570
7254
100
8459
100
9275
130
11082
130
1/2
15
3/4
20
3/8
10423555
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
Dimensions mm
mm
inch
434472
514587
594987
7163
116
7867
116
8871
117
9976
117
1/2
15
3/4
20
3/8
10424472
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
MaterialsParts
BodyBody capStemBall Ball seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Brass (nickel plated)*Brass (chrome free plated (Size 1/4 to 3))Brass (chrome plated (Size 4))
PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass (nickel plated)Brass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass Brass (chrome free plated)PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass (nickel plated)Brass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEReinforced PTFE
KITZ BRONZE & BRASS VALVES
BRASS BALL VALVE, FULL PORT
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass (nickel plated)Brass*PTFEFKM
32 33
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi), Saturated steam pressure 0.98 MPa (142 psi)
W.O.G. non-shock 4.14 MPa (600 psi)*, W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
TYPE 600
TYPE 600
TYPE 600
TYPE 600
TYPE 400
TYPE 600
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Male & Female Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21
• Threaded end to BS21
Fig. ZET
• Threaded end to BS21
Fig. ZO
• Threaded end to BS21
Fig. ZS
• Threaded end to ASME B1. 20. 1
Fig. AKSZA
• Threaded end to BS21
Fig. SZA
• Solder joint to ASME B16.18
Fig. CSZAW
• Solder joint to ASMB 16.18
Fig. CSZA
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals,
Threaded ends to ASME B1.20.1 or solder joint ends.
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals,
Threaded ends to BS21
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals,
Threaded ends to ASME B1.20.1 or solder joint ends.
• Threaded end to ASME B1. 20. 1
Fig. AKSZAW
Approvals(up to 2)
CSA (US/C)NSF/ANSI 61-8 UL FM
*Size 4 : W.O.G. non-shock 2.76MPa (400psi), W.O.G. 150˚C 0.69MPa (100psi)
*Size 4 only
CSA (US/C) UL FMNSF/ANSI61-8
*AKSZA: Size 1/4 to 3, **AKSZA only
* **
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Approvals(up to 2)
*AKSZAW only
*
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
D
H
L
H
D
L
H
D
L
L
H
D
L
H
D
L
D
H
Dimensions mm
mm
inch
4246353555
5354414170
6073454570
72885454
100
841005959
100
921157575
130
1101418282
130
1/2
15
3/4
20
3/8
1042
34
55
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
L
HeightH
D
Dimensions mm
mm
inch
4246373770
5354404080
6073434480
72885050
110
841005555
110
921156565
150
1101407272
150
1/2
15138164100100200
65
3/4
20
3/8
1042
37
70
1/4
8125
11/4
3211/2 21/2
40250
167187112112300
380
193
131
300
4100
Nominal Size
Threaded end to end
Length of Handle
L
HeightH
D
Dimensions mm
mm
inch
423670
524080
604380
7250
110
8454
110
9264
150
11072
150
1/2
15
3/4
20
3/8
10423670
1/4
8125
11/4
3211/2
40250
Nominal Size
Threaded end to end
Length of Handle
LHeightH
SolderL1
SolderH1
SolderL1
SolderH1
D
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
804480
9450
110
3/4
20603770
3/8
10744080
1/2
15593770
1/4
81
25
Dimensions mm
mm
inch
423555
524170
604570
7254
100
8459
100
9275
130
11082
130
1/2
15
3/4
20
3/8
10423555
1/4
81
2511/4
3211/2
402
50Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
Dimensions mm
mm
inch
434472
514587
594987
7163
116
7867
116
8871
117
9976
117
1/2
15
3/4
20
3/8
10424472
1/4
81
2511/4
3211/2
402
50Nominal Size
Threaded end to end
Length of Handle
LHeightH
D
MaterialsParts
BodyBody capStemBall Ball seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Brass (nickel plated)*Brass (chrome free plated (Size 1/4 to 3))Brass (chrome plated (Size 4))
PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass (nickel plated)Brass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass Brass (chrome free plated)PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass (nickel plated)Brass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEReinforced PTFE
KITZ BRONZE & BRASS VALVES
BRASS BALL VALVE, FULL PORT
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass (nickel plated)Brass*PTFEFKM
32 33
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi), Saturated steam pressure 0.98 MPa (142 psi)
W.O.G. non-shock 4.14 MPa (600 psi)*, W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
TYPE 600
TYPE 600
TYPE 600
TYPE 600
TYPE 400
TYPE 600
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Male & Female Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21
• Threaded end to BS21
Fig. ZET
• Threaded end to BS21
Fig. ZO
• Threaded end to BS21
Fig. ZS
• Threaded end to ASME B1. 20. 1
Fig. AKSZA
• Threaded end to BS21
Fig. SZA
• Solder joint to ASME B16.18
Fig. CSZAW
• Solder joint to ASMB 16.18
Fig. CSZA
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals,
Threaded ends to ASME B1.20.1 or solder joint ends.
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals,
Threaded ends to BS21
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals,
Threaded ends to ASME B1.20.1 or solder joint ends.
• Threaded end to ASME B1. 20. 1
Fig. AKSZAW
Approvals(up to 2)
CSA (US/C)NSF/ANSI 61-8 UL FM
*Size 4 : W.O.G. non-shock 2.76MPa (400psi), W.O.G. 150˚C 0.69MPa (100psi)
*Size 4 only
CSA (US/C) UL FMNSF/ANSI61-8
*AKSZA: Size 1/4 to 3, **AKSZA only
* **
CautionSolder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Approvals(up to 2)
*AKSZAW only
*
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
H
L1
L
D
L1
H
L
D
H
D
L
L1
Mounting Pad
All ports are open in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow is between Ports ”A” and ”B” in Form 3. Flow is between Ports ”A” and ”C” in Form 4. All forms are available for switching, diverging or mixing of flows. The stopper is assembled for standard operation pattern to switch flow from Form 1 to Form 2.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
1
2
■ Operation patterns available• Pattern 1 : From Form 1 to Form 4• Pattern 2 : From Form 1 to Form 2 (Standard)• Pattern 3 : From Form 3 to Form 4• Pattern 4 : From Form 2 to Form 3
Please select one of the above operationpatterns at time of order.
3-Way 4-seatT-port ball valve
All ports are open in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow is between Ports ”A” and ”C” in Form 4. Flow can be switched from Form 1 to Form 2, (Standard operation pattern) or from Form 1 to Form 4 in either direction. The stopper is assembled for the standard operation pattern.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
1
2
Flow is between Ports ”A” and ”C” in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow paths in Form 1and Form 2 can be changed each other.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
Fluid Passage
Flow is between Ports ”A” and ”C” in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow paths in Form 1and Form 2 can be changed each other.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
1
2
1
2
■ Operation patterns available• Pattern 1 : From Form 1 to Form 4• Pattern 2 : From Form 1 to Form 2 (Standard)
Please select one of the above operationpatterns at time of order.
3-Way 2-seatT-port ball valve
3-Way 4-seatL-port ball valve
T4T/AKT4T: Port position fig: Position 1,2,3 & 4 T4L: Port position fig: Position 1 & 2
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
7052
130
8556
130
10063
150
11568
150
13094.5230
150102230
1/2
15
3/4
20125
11/4
3211/2
40250
Port position fig: Position 1 & 2
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
674580
684880
7955
110
8960
110
11065
130
11575
140
1/2
15
3/4
20125
11/4
3211/2
40250
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBrassDezincification Resistant BrassBrass*PTFEFKM
Dimensions mm
mm
inch
6874484880
79885555
110
89996060
110
1001146565
110
1151367575
140
138
91
200
166
105
300
3/4
2046
34
70
3/8
106756454580
1/2
1540
30
60
1/4
8125
11/4
3211/2
40250
21/2
65380
Length of HandleD
Nominal Size
Threaded end to end
Solder
Height
LL1H
Height solderH1
KITZ BRONZE & BRASS VALVES
3-WAY BRASS BALL VALVE ALLOWABLE PORT ORIENTATION
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*BrassDezincification Resistant BrassBrass**PTFEFKM
34 35
3-WAY BRONZE BALL VALVE
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
TYPE 400
TYPE 400
Screwed body cap, 2-seat, L-port design,Blowout-proof Stem, Double O-ring stem seals*
Threaded ends to BS21 or NPT, or solder joint ends.
Screwed body cap, 4-seat, L or T-port design,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21 or NPT
Screwed body cap, 2-seat, L-port design,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21 or NPT
CautionSolder joint end valves should not be used inservice where the temperature of line fluidis higher than the softening point of solder.
• Threaded end toASME B1.20.1
Fig. AKTNP
• Threaded end to BS21
Fig. TN
• Threaded end to ASME B1.20.1
Fig. AKTN
• Solder joint end toASME B16.18• CTN 1/2 to 2
Fig. CTN
• Solder joint end toASME B16.18
Fig. CTNP
• Threaded end to BS21
Fig. T4T
• Threaded end to ASME B1.20.1
Fig. AKT4T
• Threaded end to BS21
Fig. T4L
*Size 21/2 and 3
*Size 1/2 and larger
Port position fig: Position 1 & 2
TYPE 400 3-WAY BRONZE BALL VALVE,with MOUNTING PAD
Valve Design
3-Way 2-seatL-port ball valve
Form
P2 P1
P1 P1 P1 P2
P1P2
C C
Form 1 Form 2
Form 3Not Available
Form 4
A A
A A
B B
B B
CP1
C
A BP1P2
P1
CCP1
A BP2P1
Form 1 Form 2
Top View
Top View
P2 P1
P1 P1 P1 P2
P1P2
C C
Form 1 Form 2
Form 3 Form 4
A A
A A
B B
B B
CCP1
Top View
A B A B
C
P1
CP1 P1
P2P2P1
Form 1 Form 2
Top View
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
**Chrome or Nickel-chrome plated
H
L1
L
D
L1
H
L
D
H
D
L
L1
Mounting Pad
All ports are open in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow is between Ports ”A” and ”B” in Form 3. Flow is between Ports ”A” and ”C” in Form 4. All forms are available for switching, diverging or mixing of flows. The stopper is assembled for standard operation pattern to switch flow from Form 1 to Form 2.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
1
2
■ Operation patterns available• Pattern 1 : From Form 1 to Form 4• Pattern 2 : From Form 1 to Form 2 (Standard)• Pattern 3 : From Form 3 to Form 4• Pattern 4 : From Form 2 to Form 3
Please select one of the above operationpatterns at time of order.
3-Way 4-seatT-port ball valve
All ports are open in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow is between Ports ”A” and ”C” in Form 4. Flow can be switched from Form 1 to Form 2, (Standard operation pattern) or from Form 1 to Form 4 in either direction. The stopper is assembled for the standard operation pattern.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
1
2
Flow is between Ports ”A” and ”C” in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow paths in Form 1and Form 2 can be changed each other.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
Fluid Passage
Flow is between Ports ”A” and ”C” in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow paths in Form 1and Form 2 can be changed each other.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
1
2
1
2
■ Operation patterns available• Pattern 1 : From Form 1 to Form 4• Pattern 2 : From Form 1 to Form 2 (Standard)
Please select one of the above operationpatterns at time of order.
3-Way 2-seatT-port ball valve
3-Way 4-seatL-port ball valve
T4T/AKT4T: Port position fig: Position 1,2,3 & 4 T4L: Port position fig: Position 1 & 2
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
7052
130
8556
130
10063
150
11568
150
13094.5230
150102230
1/2
15
3/4
201
2511/4
3211/2
402
50
Port position fig: Position 1 & 2
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
674580
684880
7955
110
8960
110
11065
130
11575
140
1/2
15
3/4
201
2511/4
3211/2
402
50
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBrassDezincification Resistant BrassBrass*PTFEFKM
Dimensions mm
mm
inch
6874484880
79885555
110
89996060
110
1001146565
110
1151367575
140
138
91
200
166
105
300
3/4
2046
34
70
3/8
106756454580
1/2
1540
30
60
1/4
81
2511/4
3211/2
402
5021/2
653
80
Length of HandleD
Nominal Size
Threaded end to end
Solder
Height
LL1H
Height solderH1
KITZ BRONZE & BRASS VALVES
3-WAY BRASS BALL VALVE ALLOWABLE PORT ORIENTATION
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*BrassDezincification Resistant BrassBrass**PTFEFKM
34 35
3-WAY BRONZE BALL VALVE
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
TYPE 400
TYPE 400
Screwed body cap, 2-seat, L-port design,Blowout-proof Stem, Double O-ring stem seals*
Threaded ends to BS21 or NPT, or solder joint ends.
Screwed body cap, 4-seat, L or T-port design,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21 or NPT
Screwed body cap, 2-seat, L-port design,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21 or NPT
CautionSolder joint end valves should not be used inservice where the temperature of line fluidis higher than the softening point of solder.
• Threaded end toASME B1.20.1
Fig. AKTNP
• Threaded end to BS21
Fig. TN
• Threaded end to ASME B1.20.1
Fig. AKTN
• Solder joint end toASME B16.18• CTN 1/2 to 2
Fig. CTN
• Solder joint end toASME B16.18
Fig. CTNP
• Threaded end to BS21
Fig. T4T
• Threaded end to ASME B1.20.1
Fig. AKT4T
• Threaded end to BS21
Fig. T4L
*Size 21/2 and 3
*Size 1/2 and larger
Port position fig: Position 1 & 2
TYPE 400 3-WAY BRONZE BALL VALVE,with MOUNTING PAD
Valve Design
3-Way 2-seatL-port ball valve
Form
P2 P1
P1 P1 P1 P2
P1P2
C C
Form 1 Form 2
Form 3Not Available
Form 4
A A
A A
B B
B B
CP1
C
A BP1P2
P1
CCP1
A BP2P1
Form 1 Form 2
Top View
Top View
P2 P1
P1 P1 P1 P2
P1P2
C C
Form 1 Form 2
Form 3 Form 4
A A
A A
B B
B B
CCP1
Top View
A B A B
C
P1
CP1 P1
P2P2P1
Form 1 Form 2
Top View
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
**Chrome or Nickel-chrome plated
H
D
L
Dimensions mm1/4
8mm
inch
504560
504560
654580
685080
7955
110
8660
110
9665
110
10975
140
12791
200
153105300
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
Threaded end to end
Height
Length of Handle
LHD
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFENBR
36 37
Ga
s S
erv
ice
Va
lve
s
Gas service 40ºC 0.98 MPa (142 psi)
Screwed body cap,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21
Fig. TG
BRASS BALL VALVE,DESIGNED FOR GAS SERVICE
*Nickel-chrome plated
H
L1L
D
H
L1L
D
H
LL1
D
H
LL1
D
L1L
H
H
LL1
Dimensions mm
mm
inch
525677
47.5
5660.579
47.5
636790
47.5
707596
47.5
1/2
15
3/4
20125
11/4
32Nominal Size
Threaded end to end
Length of Handle
L
HeightHD
Dimensions mm
mm
inch
275761
3062.561
3570.570
418181
1/2
15
3/4
20125
11/4
32Nominal Size
Threaded end to endL
HeightH
Dimensions mm
mm
inch
525670
5660.572
636783
707589
1/2
15
3/4
20125
11/4
32Nominal Size
Threaded end to endL
L1
L1
L1HeightH
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
MaterialBronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
MaterialBronzeBrassDezincification Resistant BrassPTFEFKM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
L
HeightHD
3062.56846
3570.57746
3/4
2027576846
1/2
15125
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
L
L1
L1HeightH
D
5660.579
47.5
636790
47.5
3/4
20525677
47.5
1/2
15125
Dimensions mm
mm
inch
27576846
3062.56846
3570.57746
41818846
1/2
15
3/4
20125
11/4
32Nominal Size
Threaded end to end
Length of Handle
LL1
HeightHD
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
38 39
Fan
coil
Va
lve
s Fan
coil V
alv
es
CLASS 200
CLASS 200
CLASS 200
CLASS 200
CLASS 200
CLASS 200
• Flow Control Valves with Indicators
Fig. INAH
• Flow Control Valves
Fig. NAH
• Flow Control Valves
Fig. NSH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
IndicatorFemale & Male Threaded ends to BS21
IndicatorFemale & Male Threaded ends to BS21
• On-off Valves
Fig. RSH
• Flow Control Valves with Indicators
Fig. INSH
• On-off Valves
Fig. RAH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
FANCOIL VALVES, BRONZE,FLOW CONTROL, ANGLE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, GLOBE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, ANGLE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, GLOBE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, ANGLE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, GLOBE TYPE
H
L1L
D
H
L1L
D
H
LL1
D
H
LL1
D
L1L
H
H
LL1
Dimensions mm
mm
inch
525677
47.5
5660.579
47.5
636790
47.5
707596
47.5
1/2
15
3/4
20125
11/4
32Nominal Size
Threaded end to end
Length of Handle
L
HeightHD
Dimensions mm
mm
inch
275761
3062.561
3570.570
418181
1/2
15
3/4
20125
11/4
32Nominal Size
Threaded end to endL
HeightH
Dimensions mm
mm
inch
525670
5660.572
636783
707589
1/2
15
3/4
20125
11/4
32Nominal Size
Threaded end to endL
L1
L1
L1HeightH
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
MaterialBronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
MaterialBronzeBrassDezincification Resistant BrassPTFEFKM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
L
HeightHD
3062.56846
3570.57746
3/4
2027576846
1/2
151
25
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
L
L1
L1HeightH
D
5660.579
47.5
636790
47.5
3/4
20525677
47.5
1/2
151
25
Dimensions mm
mm
inch
27576846
3062.56846
3570.57746
41818846
1/2
15
3/4
201
2511/4
32Nominal Size
Threaded end to end
Length of Handle
LL1
HeightHD
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
38 39
Fan
coil
Va
lve
s Fan
coil V
alv
es
CLASS 200
CLASS 200
CLASS 200
CLASS 200
CLASS 200
CLASS 200
• Flow Control Valves with Indicators
Fig. INAH
• Flow Control Valves
Fig. NAH
• Flow Control Valves
Fig. NSH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
IndicatorFemale & Male Threaded ends to BS21
IndicatorFemale & Male Threaded ends to BS21
• On-off Valves
Fig. RSH
• Flow Control Valves with Indicators
Fig. INSH
• On-off Valves
Fig. RAH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
FANCOIL VALVES, BRONZE,FLOW CONTROL, ANGLE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, GLOBE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, ANGLE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, GLOBE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, ANGLE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, GLOBE TYPE
LL1
D
H
D
H
L1L
L1L
H
H
LL1
■Nominal size: 1/2 Cv=1.8 ■Nominal size: 3/4 Cv=2.6 ■Nominal size: 1, 11/4 Cv=3.3
8060
446810
20406080
6810
20
40
000 10 20 30 40 50 60 70 80 90 1001
10
100
1
10
100
1
10
100
10 20 30 40 50 60 70 80 90 100
0 1 2
10 20 24 30 38
3 4 5 6 7 8 9 10
543210
10 20 30 40 50 60 70 80 90 100
9 16 21 288 15 20
0 1 2 3 4 5 6
0 1 2 3 0 1 2 3 4
0 1 2 3 4 5 6 7 8
46810
20406080
※ Indicator readings refer to frow rates when the pressure loss is 60 kPa.
Handle Turn
Indicator readings min min min
Lift(%)
Lift(mm)
Flowrate
Pressureloss
Handle Turn
Indicator readings
Lift(%)
Lift(mm)
Flowrate
Pressureloss
Handle Turn
Indicator readings
Lift(%)
Lift(mm)
Flowrate
Pressureloss
Dimensions mm
mm
inch
5247.570
5655.572
636983
707089
1/2
15
3/4
20125
11/4
32Nominal Size
Threaded end to endLL1
HeightH
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
MaterialBronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
MaterialBronzeBrassDezincification Resistant BrassPTFEFKM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
L
HeightHD
3057.56846
3567.57746
3/4
2027
48.56846
1/2
15125
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
L
HeightHD
5655.57946
63639046
3/4
2052
47.57746
1/2
15125
Dimensions mm
mm
inch
2748.561
3057.561
3567.570
417681
1/2
15
3/4
20125
11/4
32Nominal Size
Threaded end to endL
L1
L1
L1HeightH
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
40 41
FLOW CHARASTARISTICS
Fan
coil
Va
lve
s Fan
coil V
alv
es
CLASS 200CLASS 200
CLASS 200
CLASS 200
• On-off Valves
Fig. CRAH
• Flow Control Valves
Fig. CNAH
• Flow Control Valves
Fig. CNSH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Solder joint ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Solder joint ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Solder joint ends to BS21
• On-off Valves
Fig. CRSH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Solder joint ends to BS21FANCOIL VALVES, BRONZE,FLOW CONTROL, ANGLE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, GLOBE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, GLOBE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, ANGLE TYPE
LL1
D
H
D
H
L1L
L1L
H
H
LL1
■Nominal size: 1/2 Cv=1.8 ■Nominal size: 3/4 Cv=2.6 ■Nominal size: 1, 11/4 Cv=3.3
8060
446810
20406080
6810
20
40
000 10 20 30 40 50 60 70 80 90 1001
10
100
1
10
100
1
10
100
10 20 30 40 50 60 70 80 90 100
0 1 2
10 20 24 30 38
3 4 5 6 7 8 9 10
543210
10 20 30 40 50 60 70 80 90 100
9 16 21 288 15 20
0 1 2 3 4 5 6
0 1 2 3 0 1 2 3 4
0 1 2 3 4 5 6 7 8
46810
20406080
※ Indicator readings refer to frow rates when the pressure loss is 60 kPa.
Handle Turn
Indicator readings min min min
Lift(%)
Lift(mm)
Flowrate
Pressureloss
Handle Turn
Indicator readings
Lift(%)
Lift(mm)
Flowrate
Pressureloss
Handle Turn
Indicator readings
Lift(%)
Lift(mm)
Flowrate
Pressureloss
Dimensions mm
mm
inch
5247.570
5655.572
636983
707089
1/2
15
3/4
20125
11/4
32Nominal Size
Threaded end to endLL1
HeightH
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
MaterialBronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
MaterialBronzeBrassDezincification Resistant BrassPTFEFKM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
L
HeightHD
3057.56846
3567.57746
3/4
2027
48.56846
1/2
151
25
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
L
HeightHD
5655.57946
63639046
3/4
2052
47.57746
1/2
151
25
Dimensions mm
mm
inch
2748.561
3057.561
3567.570
417681
1/2
15
3/4
201
2511/4
32Nominal Size
Threaded end to endL
L1
L1
L1HeightH
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
40 41
FLOW CHARASTARISTICS
Fan
coil
Va
lve
s Fan
coil V
alv
es
CLASS 200CLASS 200
CLASS 200
CLASS 200
• On-off Valves
Fig. CRAH
• Flow Control Valves
Fig. CNAH
• Flow Control Valves
Fig. CNSH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Solder joint ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Solder joint ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Solder joint ends to BS21
• On-off Valves
Fig. CRSH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Solder joint ends to BS21FANCOIL VALVES, BRONZE,FLOW CONTROL, ANGLE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, GLOBE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, GLOBE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, ANGLE TYPE
D
H
L
D
H
L
D
H
L
D
H
L
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass (Nickel-chrome plated)PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
92.57240
10475.540
3/4
20887240
1/2
15125
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
667240
75.575.540
3/4
20627240
1/2
15125
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass (Nickel-chrome plated)PTFEEPDM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass (Nickel-chrome plated)PTFEEPDM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass (Nickel-chrome plated)PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
617240
70.575.540
3/4
20567240
1/2
15125
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
667240
75.575.540
3/4
20627240
1/2
15125
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
42 43
Fan
coil
Va
lve
s Fan
coil V
alv
es
10K
10K
10K
Fig. RTRR
Fig. RTRM
Fig. RTRO
Water 0ºC to 90ºC 0.98 MPa (Not Freezing)
Water 0ºC to 90ºC 0.98 MPa (Not Freezing)
Water 0ºC to 90ºC 0.98 MPa (Not Freezing)
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem sealsMale (parallel) & Female
Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Male & Female Threaded ends to BS21
10K
Fig. RTRU
Water 0ºC to 90ºC 0.98 MPa (Not Freezing)
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Female & Male (union)Threaded ends to BS21
D
H
L
D
H
L
D
H
L
D
H
L
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass (Nickel-chrome plated)PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
92.57240
10475.540
3/4
20887240
1/2
15125
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
667240
75.575.540
3/4
20627240
1/2
151
25
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass (Nickel-chrome plated)PTFEEPDM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass (Nickel-chrome plated)PTFEEPDM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass (Nickel-chrome plated)PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
617240
70.575.540
3/4
20567240
1/2
151
25
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
667240
75.575.540
3/4
20627240
1/2
151
25
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
42 43
Fan
coil
Va
lve
s Fan
coil V
alv
es
10K
10K
10K
Fig. RTRR
Fig. RTRM
Fig. RTRO
Water 0ºC to 90ºC 0.98 MPa (Not Freezing)
Water 0ºC to 90ºC 0.98 MPa (Not Freezing)
Water 0ºC to 90ºC 0.98 MPa (Not Freezing)
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem sealsMale (parallel) & Female
Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Male & Female Threaded ends to BS21
10K
Fig. RTRU
Water 0ºC to 90ºC 0.98 MPa (Not Freezing)
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Female & Male (union)Threaded ends to BS21
H
D
L
L
H
D
D
L
H
Predetermined Flow Rates and Product Coding forBalancing Valves and Balancers ”SADAMARU”
●Predetermined Flow Rate
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
92.57240
10475.540
3/4
20887240
1/2
15125
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
100.563.555
115.566.555
3/4
2094.563.555
1/2
15125
Max working pressure 1.0 MPa, Working temperature Water 0ºC to 60ºC,Control range 0.15 MPa to 0.49 MPa, Flow rate 3 to 30 L/min
MaterialsParts
BodyCapStemBallBall seatsO-ring
BronzeBrassDezincification Resistant BrassBrass (Nickel-chrome plated)PTFEEPDM
Max working pressure 0.98 MPa, Working temperature Water 0ºC to 90ºC,Control range 0.05 MPa to 0.49 MPa, Flow rate 4 to 30 L/min
Max working pressure 0.98 MPa, Working temperature Water 0ºC to 80ºC,Control range 0.05 MPa to 0.49 MPa, Flow rate 3 to 40 L/min
MaterialsParts
BodyCapStemBallBall seatsO-ring
BronzeBrassDezincification Resistant BrassBrass (chrome plated)PTFEFKM
MaterialsParts
BodyBonnetCapStemDisc
MaterialBronzeBrassBrassDezincification Resistant BrassReinforced PTFE
Note: Flow rates marked with ● are available.
Product Coding
Example : RTUC, Nominal size 20, Predetermined flow rate: 10R/min
Predetermined Flow Rate
Product Code: BS [Controllable flow rate ±10%]Nominal Size (mm)
15
20
4 5 7.5 10 12.5 15 17.5 20 25 30
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
Dimensions mm
(R/min)
(R/min)
(R/min)
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
121.58940
3/4
20118.5
8940
1/2
15
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
44 45
Ba
lan
cin
g V
alv
es B
ala
ncin
g V
alv
es
10K
10K
10K
Fig. RTUC
Fig. BS
Fig. BSS
RTUC20-10
BSBSSRTUC -
Constant flow control valveFemale & Male (union nipple)
Threaded ends to BS21
Constant flow control valve, Ball valve typeFemale & Male (union nipple)
Threaded ends to BS21
Ball ValveFemale & Male (union nipple)
Threaded ends to BS21
BRONZE BALANCING VALVESLOW-NOISE TYPE
”SADAMARU”CONSTANT FLOW CONTROL
Product Code: BSS [Controllable flow rate ±10%]Nominal Size (mm)
15
20
25
43 5 7.56 10 12.5 15 17.5 20 25 30 35 40
● ● ● ● ● ● ● ●
● ●
● ● ● ● ● ● ● ● ● ●
●
●
●
Product Code: RTUC [Controllable flow rate ±15%, ±20% (5 /min only)]Nominal Size (mm)
15
20
25
5 7.56 10 12.5 15 17.5 20 25 30
● ● ● ● ● ● ●
● ● ● ●
8
●
● ● ● ● ● ●
●
●
●
BRONZE BALANCING VALVESwith BUILT-IN SCREEN
Nominal Size
Constant Flow Valve Product Code
H
D
L
L
H
D
D
L
H
Predetermined Flow Rates and Product Coding forBalancing Valves and Balancers ”SADAMARU”
●Predetermined Flow Rate
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
92.57240
10475.540
3/4
20887240
1/2
151
25
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
100.563.555
115.566.555
3/4
2094.563.555
1/2
151
25
Max working pressure 1.0 MPa, Working temperature Water 0ºC to 60ºC,Control range 0.15 MPa to 0.49 MPa, Flow rate 3 to 30 L/min
MaterialsParts
BodyCapStemBallBall seatsO-ring
BronzeBrassDezincification Resistant BrassBrass (Nickel-chrome plated)PTFEEPDM
Max working pressure 0.98 MPa, Working temperature Water 0ºC to 90ºC,Control range 0.05 MPa to 0.49 MPa, Flow rate 4 to 30 L/min
Max working pressure 0.98 MPa, Working temperature Water 0ºC to 80ºC,Control range 0.05 MPa to 0.49 MPa, Flow rate 3 to 40 L/min
MaterialsParts
BodyCapStemBallBall seatsO-ring
BronzeBrassDezincification Resistant BrassBrass (chrome plated)PTFEFKM
MaterialsParts
BodyBonnetCapStemDisc
MaterialBronzeBrassBrassDezincification Resistant BrassReinforced PTFE
Note: Flow rates marked with ● are available.
Product Coding
Example : RTUC, Nominal size 20, Predetermined flow rate: 10R/min
Predetermined Flow Rate
Product Code: BS [Controllable flow rate ±10%]Nominal Size (mm)
15
20
4 5 7.5 10 12.5 15 17.5 20 25 30
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
Dimensions mm
(R/min)
(R/min)
(R/min)
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
121.58940
3/4
20118.5
8940
1/2
15
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
44 45
Ba
lan
cin
g V
alv
es B
ala
ncin
g V
alv
es
10K
10K
10K
Fig. RTUC
Fig. BS
Fig. BSS
RTUC20-10
BSBSSRTUC -
Constant flow control valveFemale & Male (union nipple)
Threaded ends to BS21
Constant flow control valve, Ball valve typeFemale & Male (union nipple)
Threaded ends to BS21
Ball ValveFemale & Male (union nipple)
Threaded ends to BS21
BRONZE BALANCING VALVESLOW-NOISE TYPE
”SADAMARU”CONSTANT FLOW CONTROL
Product Code: BSS [Controllable flow rate ±10%]Nominal Size (mm)
15
20
25
43 5 7.56 10 12.5 15 17.5 20 25 30 35 40
● ● ● ● ● ● ● ●
● ●
● ● ● ● ● ● ● ● ● ●
●
●
●
Product Code: RTUC [Controllable flow rate ±15%, ±20% (5 /min only)]Nominal Size (mm)
15
20
25
5 7.56 10 12.5 15 17.5 20 25 30
● ● ● ● ● ● ●
● ● ● ●
8
●
● ● ● ● ● ●
●
●
●
BRONZE BALANCING VALVESwith BUILT-IN SCREEN
Nominal Size
Constant Flow Valve Product Code
H
D
L
H
D
L
H
D
L
D
H
L
D
H
L
D
H
L
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*Reinforced PTFENBR
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
584240
3/4
2052.53940
1/2
15
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*Reinforced PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
584240
3/4
2052.53940
1/2
15
*Chrome or Nickel-chrome plated
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrassDezincification Resistant BrassBrass*Reinforced PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
584240
3/4
2052.53940
1/2
15
KITZ BRONZE & BRASS VALVES
UTILITY BALL VALVES, STRAIGHT TYPE
KITZ BRONZE & BRASS VALVES
46 47
UTILITY BALL VALVES, STRAIGHT TYPE
Uti
lity
Ba
ll V
alv
es U
tility B
all V
alv
es
Fig. S22
Fig. S1
Fig. S2
Male & Male (parallel) Threaded ends to BS21
Chrome plated bodyMale & Male (parallel) Threaded ends to BS21
Chrome plated body, For kerosene serviceMale & Male (parallel) Threaded ends to BS21
UTILITY BALL VALVES, STRAIGHT TYPE
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*Reinforced PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
314240
3/4
2028.53940
1/2
15
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*Reinforced PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
585540
3/4
2052.55240
1/2
15
*Chrome or Nickel-chrome plated
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrassDezincification Resistant BrassBrass*Reinforced PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
585540
3/4
2052.55240
1/2
15
UTILITY BALL VALVES, STRAIGHT TYPE
UTILITY BALL VALVES, ANGLE TYPE
Fig. S5
Fig. S3
Fig. S4
Chrome plated body, Long HandleMale & Male (parallel) Threaded ends to BS21
Long HandleMale & Male (parallel) Threaded ends to BS21
Chrome plated bodyMale & Male (parallel) Threaded ends to BS21
UTILITY BALL VALVES, STRAIGHT TYPE
*Chrome or Nickel-chrome plated
H
D
L
H
D
L
H
D
L
D
H
L
D
H
L
D
H
L
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*Reinforced PTFENBR
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
584240
3/4
2052.53940
1/2
15
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*Reinforced PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
584240
3/4
2052.53940
1/2
15
*Chrome or Nickel-chrome plated
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrassDezincification Resistant BrassBrass*Reinforced PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
584240
3/4
2052.53940
1/2
15
KITZ BRONZE & BRASS VALVES
UTILITY BALL VALVES, STRAIGHT TYPE
KITZ BRONZE & BRASS VALVES
46 47
UTILITY BALL VALVES, STRAIGHT TYPE
Uti
lity
Ba
ll V
alv
es U
tility B
all V
alv
es
Fig. S22
Fig. S1
Fig. S2
Male & Male (parallel) Threaded ends to BS21
Chrome plated bodyMale & Male (parallel) Threaded ends to BS21
Chrome plated body, For kerosene serviceMale & Male (parallel) Threaded ends to BS21
UTILITY BALL VALVES, STRAIGHT TYPE
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*Reinforced PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
314240
3/4
2028.53940
1/2
15
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*Reinforced PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
585540
3/4
2052.55240
1/2
15
*Chrome or Nickel-chrome plated
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrassDezincification Resistant BrassBrass*Reinforced PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
585540
3/4
2052.55240
1/2
15
UTILITY BALL VALVES, STRAIGHT TYPE
UTILITY BALL VALVES, ANGLE TYPE
Fig. S5
Fig. S3
Fig. S4
Chrome plated body, Long HandleMale & Male (parallel) Threaded ends to BS21
Long HandleMale & Male (parallel) Threaded ends to BS21
Chrome plated bodyMale & Male (parallel) Threaded ends to BS21
UTILITY BALL VALVES, STRAIGHT TYPE
*Chrome or Nickel-chrome plated
D
H
L
H
D
L
D
H
L
Design feature of KITZ S Ball Valve, check valve built-in ball valves body.
Cross-sectional illustration of the check-valve-built-in ball valves
Compact design with a check valve built in the ball valve body.Prevention of reverse flow by automatic closing of the spring-loaded built-in check valve ( Water hammer proof ).Quarter turn operation with detachable handle for easy valve mounting or maintenance, and piping insulation.Direct installation of the valves to flexible pipes on the downstream side.
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass Dezincification Resistant BrassBrass*Reinforced PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
594240
3/4
20543940
1/2
15
*Chrome or Nickel-chrome plated
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*Reinforced PTFENBR
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
314240
3/4
2028.53940
1/2
15
KITZ BRONZE & BRASS VALVES
UTILITY BALL VALVES, ANGLE TYPE
KITZ BRONZE & BRASS VALVES
48 49
Uti
lity
Ba
ll V
alv
es U
tility B
all V
alv
es
Fig. S52
Fig. S6
Male & Female Threaded ends to BS21
Chrome plated body, For kerosene serviceMale & Male (parallel) Threaded ends to BS21
UTILITY BALL VALVES, STRAIGHT TYPE
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrassDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
74516340
3/4
2072516340
1/2
15
*Chrome or Nickel-chrome plated
0.98 MPa water, 0ºC to +80ºC (Not Freezing)
UTILITY BALL VALVES, STRAIGHT TYPE
Fig. S23LN
A Check Valve Built-in Ball ValveMale & Male (parallel) Threaded ends to BS21
• Long handle
Fig. S23N
Handle
Body
Cap
Ball seat
Ball
Check Valve
O-ring
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
D
H
L
H
D
L
D
H
L
Design feature of KITZ S Ball Valve, check valve built-in ball valves body.
Cross-sectional illustration of the check-valve-built-in ball valves
Compact design with a check valve built in the ball valve body.Prevention of reverse flow by automatic closing of the spring-loaded built-in check valve ( Water hammer proof ).Quarter turn operation with detachable handle for easy valve mounting or maintenance, and piping insulation.Direct installation of the valves to flexible pipes on the downstream side.
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass Dezincification Resistant BrassBrass*Reinforced PTFEEPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
594240
3/4
20543940
1/2
15
*Chrome or Nickel-chrome plated
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
0.98 MPa water, -20ºC to +100ºC (Not Freezing)
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*Reinforced PTFENBR
Dimensions mm
mm
inchNominal Size
Threaded end to end
Length of Handle
LHeightH
D
314240
3/4
2028.53940
1/2
15
KITZ BRONZE & BRASS VALVES
UTILITY BALL VALVES, ANGLE TYPE
KITZ BRONZE & BRASS VALVES
48 49
Uti
lity
Ba
ll V
alv
es U
tility B
all V
alv
es
Fig. S52
Fig. S6
Male & Female Threaded ends to BS21
Chrome plated body, For kerosene serviceMale & Male (parallel) Threaded ends to BS21
UTILITY BALL VALVES, STRAIGHT TYPE
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrassDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
74516340
3/4
2072516340
1/2
15
*Chrome or Nickel-chrome plated
0.98 MPa water, 0ºC to +80ºC (Not Freezing)
UTILITY BALL VALVES, STRAIGHT TYPE
Fig. S23LN
A Check Valve Built-in Ball ValveMale & Male (parallel) Threaded ends to BS21
• Long handle
Fig. S23N
Handle
Body
Cap
Ball seat
Ball
Check Valve
O-ring
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
D
H
L
D
H
L
H
L
D
H
L
D
H
L
D
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
• Chrome plated body
Fig. S24N - 3/4 x
• Chrome plated body, Long handle
Fig. S24LN - 3/4 x
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
74516340
3/4
2072516340
1/2
15
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
0.98 MPa clean water, 0ºC to +80ºC (Not Freezing)
0.98 MPa clean water, 0ºC to +80ºC (Not Freezing)
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
75516340
3/4
2073516340
1/2
15
KITZ BRONZE & BRASS VALVES
UTILITY BALL VALVES, STRAIGHT TYPE
KITZ BRONZE & BRASS VALVES
50 51
Uti
lity
Ba
ll V
alv
es U
tility B
all V
alv
es
A Check Valve Built-in Ball ValveMale & Male (parallel) Threaded ends to BS21
A Check Valve Built-in Ball ValveFemale & Female Threaded ends to BS21UTILITY BALL VALVES, STRAIGHT TYPE
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
73516340
3/4 x 1/2
20 x 15
0.98 MPa clean water, 0ºC to +80ºC (Not Freezing)
UTILITY BALL VALVES, STRAIGHT TYPE A Check Valve Built-in Ball ValveFemale & Male (parallel) Threaded ends to BS21
• Chrome plated body
Fig. S24N
• Chrome plated body, Long handle
Fig. S24LN
• Chrome plated body
Fig. S25N
• Chrome plated body, Long handle
Fig. S25LN
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
0.98 MPa clean water, 0ºC to +80ºC (Not Freezing)
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
72.5516340
3/4
2070.5516340
1/2
15
A Check Valve Built-in Ball ValveFemale & Male (parallel) Threaded ends to BS21UTILITY BALL VALVES, STRAIGHT TYPE
• Chrome plated body
Fig. S28N
• Chrome plated body, Long handle
Fig. S28LN
Direct flow 40ºC MAX, Reverse flow 80ºC MAX Direct flow 40ºC MAX, Reverse flow 80ºC MAX
Direct flow 40ºC MAX, Reverse flow 80ºC MAXDirect flow 40ºC MAX, Reverse flow 80ºC MAX
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
0.98 MPa clean water, 0ºC to +80ºC (Not Freezing)
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
A Check Valve Built-in Ball ValveFemale & Male (parallel) Threaded ends to BS21UTILITY BALL VALVES, STRAIGHT TYPE
• Chrome plated body
Fig. S28N - 3/4 x
• Chrome plated body, Long handle
Fig. S28LN - 3/4 x
71.5516340
3/4 x 1/2
20 x 15
D
H
L
D
H
L
H
L
D
H
L
D
H
L
D
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
• Chrome plated body
Fig. S24N - 3/4 x
• Chrome plated body, Long handle
Fig. S24LN - 3/4 x
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
74516340
3/4
2072516340
1/2
15
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
0.98 MPa clean water, 0ºC to +80ºC (Not Freezing)
0.98 MPa clean water, 0ºC to +80ºC (Not Freezing)
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
75516340
3/4
2073516340
1/2
15
KITZ BRONZE & BRASS VALVES
UTILITY BALL VALVES, STRAIGHT TYPE
KITZ BRONZE & BRASS VALVES
50 51
Uti
lity
Ba
ll V
alv
es U
tility B
all V
alv
es
A Check Valve Built-in Ball ValveMale & Male (parallel) Threaded ends to BS21
A Check Valve Built-in Ball ValveFemale & Female Threaded ends to BS21UTILITY BALL VALVES, STRAIGHT TYPE
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
73516340
3/4 x 1/2
20 x 15
0.98 MPa clean water, 0ºC to +80ºC (Not Freezing)
UTILITY BALL VALVES, STRAIGHT TYPE A Check Valve Built-in Ball ValveFemale & Male (parallel) Threaded ends to BS21
• Chrome plated body
Fig. S24N
• Chrome plated body, Long handle
Fig. S24LN
• Chrome plated body
Fig. S25N
• Chrome plated body, Long handle
Fig. S25LN
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
0.98 MPa clean water, 0ºC to +80ºC (Not Freezing)
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
72.5516340
3/4
2070.5516340
1/2
15
A Check Valve Built-in Ball ValveFemale & Male (parallel) Threaded ends to BS21UTILITY BALL VALVES, STRAIGHT TYPE
• Chrome plated body
Fig. S28N
• Chrome plated body, Long handle
Fig. S28LN
Direct flow 40ºC MAX, Reverse flow 80ºC MAX Direct flow 40ºC MAX, Reverse flow 80ºC MAX
Direct flow 40ºC MAX, Reverse flow 80ºC MAXDirect flow 40ºC MAX, Reverse flow 80ºC MAX
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
0.98 MPa clean water, 0ºC to +80ºC (Not Freezing)
Dimensions mm
mm
inchNominal Size
Threaded end to end
Long Handle
LHeightH
HLength of HandleD
A Check Valve Built-in Ball ValveFemale & Male (parallel) Threaded ends to BS21UTILITY BALL VALVES, STRAIGHT TYPE
• Chrome plated body
Fig. S28N - 3/4 x
• Chrome plated body, Long handle
Fig. S28LN - 3/4 x
71.5516340
3/4 x 1/2
20 x 15
1001① ITP
E -101=16