BRUSH GASKETINGCONTENTS:180O Aluminum Retainers ............................................................................................ 90-91180O Concealed Fastener Retainers ................................................................................... 9190O Aluminum Retainers ..................................................................................................... 9245O Aluminum Retainers ............................................................................................... 92-9345O Concealed Fastener Retainers ..................................................................................... 9335O Aluminum Retainers ..................................................................................................... 94Mortise Retainers ................................................................................................................. 94 Aluminum Retainers With Rain Drip ................................................................................. 94 Oak Retainers 36" Wide ...................................................................................................... 94Meeting Stiles ....................................................................................................................... 95 Automatic Door Bottoms .................................................................................................... 96
INDEX:345 ..............................94411 ..............................96434 ..............................963452 ............................944131 ............................964301 ............................965025 ............................945041 ............................945061 ............................9418041 ...................91, 9518061 ...................91, 9518062 .........................9118062W ......................94
18100 .........................9118100W ......................9418137 .........................9018175 .........................9018250 .........................9018400 .........................9018950 .........................9029324 ...................91, 9529326 ...................91, 9529344 .........................9329346 .........................9335041 .........................9435061 .........................94
45041 .........................9345061 .........................9345062 .........................9245100 .........................9345137 .........................9345175 .........................9245250 .........................9245400 .........................9290041 .........................9290062 .........................9290100 .........................9290137 .........................92293100 .......................91
PRODUCT PAGE PRODUCT PAGE PRODUCT PAGE
BR-1 89© 2009 Pemko Manufacturing Co.Rev. 4, 05.01.09
VENTURA , CA USAPH. 800.283.9988
MEMPHIS, TN USAPH. 800.824.3018
VANCOUVER, BC CANADAPH. 877.535.7888
TORONTO, ON CANADAPH. 866.243.9816
C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • PW (Painted White)
• All brush seals consist of densely compressed nylon filaments encased in high quality aluminum retainers. These products are ideally suited for hollow metal and wood door (in-door sweep, jamb/header gasketing, and split astragal) applications. Also use Pemko’s brush weatherstripping products on overhead doors, sectional doors, sliding doors, and automatic doors.
• All brush seals greatly reduce the infiltration of light, air, wind, rain, and snow; prevent heat loss; control the penetration of smoke and fumes.
• Some brush products are now available in painted white aluminum with white colored nylon brush (example: 18062PWNB).
• The dense nylon filaments conform to the contours of every sealing surface, providing a superior seal with extremely low closing force.
• Brush remains flexible down to -40°F and has a melting point above 400°F.• UV stabilized, dependable, long-lasting, cost-effective.• Nylon brush insert is designated by a “NB” following the finish code.• All brush seals come with #6 x 5/8" stainless steel sheet metal screws.• BHMA logo represents products that meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air
infiltration.• Punched with slotted holes for adjustment (except 35° angle types which are drilled with 1/8" hole).• All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes
supplied with black brush.
18950_NB does not come punched or drilled unless
specified otherwise.
18175_NBAVAILABLE FINISHES:C, D, G
18137_NBAVAILABLE FINISHES:C, D, G, PW
18250_NBAVAILABLE FINISHES:C, D, G
18400_NBAVAILABLE FINISHES:C, D, G
BRUSH GASKETING
AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart)
180° Aluminum Retainers
BRU
SH G
ASKE
TIN
G
18950_NBAVAILABLEFINISHES:C, D
90 BR-2
www.pemko.com
C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • PW (Painted White) • SN (Satin Nickel Anodized)
BRUSH GASKETINGBRU
SH G
ASKETING
AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart)
180° Aluminum Retainers (Cont.)
18100_NBAVAILABLE FINISHES:C, D, G, PW
18041_SBAVAILABLE FINISHES:C, D, G, SN
ALTERNATE INSERT FOR 18041
18041_NBAVAILABLE FINISHES:C, D, G, SN
18061_NBAVAILABLE FINISHES:C, D, G, SN
18062_NBAVAILABLE FINISHES:C, D, G, PW
• Aluminum snap cover conceals mounting screws to provide a clean aesthetic appearance.
• Covers snap securely into place to deter vandalism.
• All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
293100_NBAVAILABLE FINISHES:C, D
180° Concealed Fastener Retainers
29326_NBAVAILABLE FINISHES:C, D, G
29324_NBAVAILABLE FINISHES:C, D, G
ALTERNATE INSERT FOR 29324
29324_SBAVAILABLE FINISHES:C, D
BR-3 91
VENTURA , CA USAPH. 800.283.9988
MEMPHIS, TN USAPH. 800.824.3018
VANCOUVER, BC CANADAPH. 877.535.7888
TORONTO, ON CANADAPH. 866.243.9816
C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized)
BRUSH GASKETING
AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart)
• Design permits use as a concealed seal for many applications.
• Slotted holes for adjustment.
• See the information section at top of page 90 for additional data on the brush weatherstrip shown on this page.
90041_NBAVAILABLE FINISHES:C, D
90100_NBAVAILABLE FINISHES:C, D, G
90137_NBAVAILABLE FINISHES:C, D, G
90062_NBAVAILABLE FINISHES:C, D
90041_SBAVAILABLE FINISHES:C, D
ALTERNATE INSERT FOR 90041
90° Aluminum Retainers
• BHMA logo represents products that meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration.
• See the information section at the top of page 90 for additional data on the brush weatherstrip shown on this page.
45250_NBAVAILABLE FINISHES:C, D, G
45175_NBAVAILABLE FINISHES:C, D, G
45400_NBAVAILABLE FINISHES:C, D
45° Aluminum Retainers
92 BR-4
BRU
SH G
ASKE
TIN
G
www.pemko.com
C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • PW (Painted White) • SN (Satin Nickel Anodized)
BRUSH GASKETING
AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart)
45° Aluminum Retainers (Cont.)
45137_NBAVAILABLE FINISHES:C, D, PW
45041_SBAVAILABLE FINISHES:C, D, G, SN
ALTERNATE INSERT FOR 45041
45061_NBAVAILABLE FINISHES:C, D, G, SN
45062_NBAVAILABLE FINISHES:C, D, G, PW
45041_NBAVAILABLE FINISHES:C, D, G, SN
45100_NBAVAILABLE FINISHES:C, D, G, PW
ALTERNATE INSERT FOR 29344
29344_SBAVAILABLE FINISHES:C, D
45° Concealed Fastener Retainers
29346_NBAVAILABLE FINISHES:C, D
29344_NBAVAILABLE FINISHES:C, D
BR-5 93
BRUSH
GASKETIN
G
VENTURA , CA USAPH. 800.283.9988
MEMPHIS, TN USAPH. 800.824.3018
VANCOUVER, BC CANADAPH. 877.535.7888
TORONTO, ON CANADAPH. 866.243.9816
A (Mill Finish Aluminum) • BDG (Bright Dip Gold Anodized) • C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) PW (Painted White) • SN (Satin Nickel Anodized) • W (Solid Oak)
BRUSH GASKETING
AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart)
• These products have 1/8" drilled fastener holes.
35° Aluminum Retainers
3452_NB 345_NBAVAILABLE FINISHES:BDG, C, D, G, PW, SN
Aluminum Retainers withRain Drip
AVAILABLE FINISHES:A, BDG, D, G, PW
ALTERNATE INSERT FOR 35041
35041_SBAVAILABLE FINISHES:C, D, G
35041_NBAVAILABLE FINISHES:C, D, G
35061_NBAVAILABLE FINISHES:C, D, G
18100WNBAVAILABLE FINISHES:W
18062WNBAVAILABLE FINISHES:W
Oak Retainers 36" Wide• These products have 1/8" drilled fastener holes.
• The ultimate design for concealed weatherstrip needs.
• Can be used on doors, windows and more.
• BHMA logo represents products that meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration.
• All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
ALTERNATE INSERT FOR 5041
5041_SBAVAILABLE FINISHES:A
Mortise Retainers
5041_NBAVAILABLE FINISHES:A
5061_NBAVAILABLE FINISHES:A
5025_SBAVAILABLE FINISHES:A
94 BR-6
BRU
SH G
ASKE
TIN
G
www.pemko.com
C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • SN (Satin Nickel Anodized)
• Astragals and meeting stiles on double doors often present problems because of complex conditions and requirements. Pemko offers some simple and inexpensive solutions as well as more detailed ones. Each job should be carefully studied as to the specific requirements when selecting the appropriate gasketing. Note that some astragals consist of two parts, one for each door, and should be ordered as such.
• Astragals and meeting stiles with a fire label may be mounted on pairs of doors wherein the gap meets the requirements of NFPA 80, 2-3.1.7 “ The clearance between...the meeting edges of doors swinging in pairs on the pull side shall be 1/8” ± 1/16” (3.18mm ± 1.59mm) for steel doors and shall not exceed 1/8” (3.18mm) for wood doors.”
18041_NB
• All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
• BHMA logo represents products that meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration.
• Snap covering helps prevent vandalism and adds an attractive finished look by concealing the fasteners.
• NOTE: Although drawn with a gap between the brushes, when these products are installed, brushes SHOULD make slight contact.
29324_NBAVAILABLE FINISHES:C, D, G
AVAILABLE FINISHES:C, D, G, SN
ALTERNATE INSERT FOR 18041
18041_SBAVAILABLE FINISHES:C, D, G, SN
ALTERNATE INSERT FOR 29324
29324_SBAVAILABLE FINISHES:C, D, G
18061_NBAVAILABLE FINISHES:C, D, G, SN
29326_NBAVAILABLE FINISHES:C, D
BRUSH GASKETING
AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart)
Meeting Stiles
BR-7 95
BRUSH
GASKETIN
G
NOTE: Brush should mesh from 1/32" to 1/16". NOTE: Brush should
mesh from 1/32" to 1/16".
NOTE: Brush should mesh from 1/32" to 1/16".
NOTE: Brush should mesh from 1/32" to 1/16".
VENTURA , CA USAPH. 800.283.9988
MEMPHIS, TN USAPH. 800.824.3018
VANCOUVER, BC CANADAPH. 877.535.7888
TORONTO, ON CANADAPH. 866.243.9816
A (Mill Finish Aluminum) • BDG (Bright Dip Gold Anodized) • C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • SN (Satin Nickel Anodized)
BRUSH GASKETING
AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart)
Automatic Door Bottoms• When ordering, please specify if the automatic door bottom is for a semi-mortise application so that shorter screws can be provided.
• BHMA logo represents products that meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration.
• All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
411_NBLAVAILABLE FINISHES:A
4131_NBLAVAILABLE FINISHES:BDG, C, D, G, SN
434_NBLAVAILABLE FINISHES:A
4301_NBLAVAILABLE FINISHES:C, D
96 BR-8
BRU
SH G
ASKE
TIN
G