www.hitachipowertools.com.au Scan to see more of the Hitachi Range Illustrations are for display purposes only. Product information and specifications should be confirmed at time of purchase. PLEASE READ HANDLING INSTRUCTIONS BEFORE USE E&OE 01/10/2017. NT1865DBAL FINISH NAILER NR1890DBCL FRAMING NAILER 15GA/65MM NT1865DBSL FINISH NAILER NT1850DBSL BRAD NAILER Brushless Motor Brushless motors are 30% more efficient than conventional models as no energy is wasted through brush friction thus extending battery run time. Multiple Protection Circuit (MPC) Hitachi Li-ion batteries have a multiple protection circuit fitted that monitors every cell in the battery. This protects the battery and tool by providing overload protection which stops the tool instantly in the event of a jam or overload. It gives over charge and over discharge protection which ensures the battery life is extended. Multiple Protection Circuit Air vents for cooling between cells Heat sensor USB port (5V 2A) Cable and smartphone not included. Large charge indicator lamp with 4 color status LED and sound alert once charging is complete 18V CORDLESS FINISH NAILERS NT1865DBAL NT1865DBSL 18V CORDLESS FRAMING NAILER NR1890DBCL 18V CORDLESS BRAD NAILER NT1850DBSL NT1865DBAL DA SERIES For NT1865DBSL C SERIES For NT1850DBSL C1 SERIES For L 16(5/8) – 50(2) A 1.9(.075) B 1.0(.039) C 1.1(.043) D 1.25(.049) mm (in.) A A D B D B C C L L mm (in.) L 25(1) – 65(2-1/2) A 2.8(.110) B 1.4(.054) C 1.3(.050) D 1.65(.065) A B C L D mm (in.) L 32(1-1/4) – 65(2-1/2) A 2.4(.095) B 3.0(.12) C 1.1(.045) D 1.8(.072) NR1890DBCL 34° CLIPPED HEAD For mm (in.) L 50(2) – 90(3-1/2) d 2.9(.113) – 3.3(.131) D 6.8(.266) – 7.7(.303) L d D NT1865DBAL DA SERIE Applicable nail sizes 3.6kg NT1865DBAL NT1865DBSL NT1850DBSL Nail Length Driving System Loading Capacity Firing Mode Driving Speed Battery Voltage Dimension: H x L x W (with BSL1860 battery) Weight (with BSL1860 battery)* 1 Standard Accessories 32mm to 65mm 100nails 25mm to 65mm 100nails Unique Air Drive 16mm to 50mm 100nails 3.8kg 315 x 310 x 104mm 344 x 310 x 104mm 323 x 310 x 104mm Full sequential/ Contact (Selectable) 2 x BSL1860 batteries, UC18YSL3 rapid charger with cooling system and USB port, stackable carry case, hook, nose cap and safety glasses *1. Hook excluded. All models are also available Naked 3nails/sec. (Intermittent) 18V SPECIFICATIONS ONE SYSTEM. ONE SOLUTION. FULL COMPATIBILITY WITH ENTIRE 18V SLIDE RANGE Two Way (AC/DC) Cooling Charger UC18YML2 Impact Driver Drill DV18DSDL Impact Driver Drill DV18DJL Driver Drill DS18DJL Driver Drill DS18DSDL Impact Driver WH18DSDL High Torque Impact Wrench WR18DSHL Impact Wrench WR18DSDL IP56 Impact Wrench WR18DBDL2 IP56 Triple Hammer Impact Driver WH18DBDL2 Electronic Pulse Driver WM18DBL 125mm Angle Grinder G18DSL 125mm Angle Grinder with Paddle Switch G18DBAL 165mm Circular Saw C18DSL 125mm Circular Saw C18DBL Angle Drill DN18DSL Rotary Hammer DH18DSL Hedge Trimmer CH18DSL Grass Trimmer CG18DSDL Multi Tool CV18DBL 165mm Circular Saw C18DBAL Worklight UB18DGL Torch & Worklight UB18DJL Wet and Dry Vacuum R18DSL Blower and Vacuum RB18DSL Digital Radio UR18DSAL Digital Radio With Bluetooth UR18DSDL 82mm Planer P18DSL Band Saw CB18DBL USB Adaptor BSL18UA NEW Impact Driver Drill DV18DBL2 Jig Saw CJ18DSL Reciprocating Saw CR18DBL High Pressure Washer AW18DBL 16mm Steel Rebar Cutter CF18DSL Stapler N18DSL 20mm Steel Rebar Cutter CF18DSAL Rapid Charger UC18YSL3 6.0Ah Li-ion Battery BSL1860 Cordless Cleaner R18DSAL Nibbler CN18DSL 18v Cordless Finish Nailer NT1865DBSL 18v Cordless Finish Nailer NT1865DBAL 18v Cordless Framing Nailer NR1890DBCL 18v Cordless Brad Nailer NT1850DBSL Automatic Screw Driver WF18DSL Shear CE18DSL Driver Drill DS18DBL2 Rotary Hammer DH18DBL Rotary Hammer DH18DBQL Dust Extractor 402933 / 402934 NEW Driving Type Unique Air Drive Nail Length 50mm to 90mm Driving Speed 1.5 to 2 nails/sec. (Intermittent) Loading Capacity 47 nails Firing Mode Full sequential / Contact (Selectable) Battery Voltage 18V Dimension: H x L (with BSL1860 battery) 342mm x 309mm Weight (with BSL1860 battery) 4.8kg Standard Accessories 2 x BSL1860 batteries, UC18YSL3 rapid charger with cooling system and USB port, stackable carry case, hook, 2 x hex wrenches and safety glasses NEW 16GA/65MM 18GA/50MM SPECIFICATIONS Reciprocating Saw CR18DSL NEW NEW NEW
Transcript
www.hitachipowertools.com.au
Scan to see more of the Hitachi Range
Illustrations are for display purposes only. Product information and specifi cations should be confi rmed at time of purchase. PLEASE READ HANDLING INSTRUCTIONS BEFORE USE E&OE 01/10/2017.
NT1865DBALFINISH NAILER
NR1890DBCLFRAMING NAILER
15GA/65MM
NT1865DBSLFINISH NAILER
NT1850DBSLBRAD NAILER
Brushless Motor
Brushless motors are 30% more effi cient than conventional models as no energy is wasted through brush friction thus extending battery run time.
Multiple Protection Circuit (MPC)Hitachi Li-ion batteries have a multiple protection circuit fi tted that monitors every cell in the battery. This protects the battery and tool by providing overload protection which stops the tool instantly in the event of a jam or overload. It gives over charge and over discharge protection which ensures the battery life is extended.
Multiple Protection Circuit
Air vents for cooling between
cells
Heat sensor
USB port(5V 2A)Cable and smartphone not included.Large charge indicator lamp
with 4 color status LEDand sound alert once charging is complete
18V CORDLESS FINISH NAILERSNT1865DBAL NT1865DBSL
18V CORDLESS FRAMING NAILERNR1890DBCL
18V CORDLESS BRAD NAILERNT1850DBSL
3.6kg
NT1865DBAL NT1865DBSL NT1850DBSL
Nail Length
Driving System
Loading Capacity
Firing Mode
Driving Speed
Battery Voltage
Dimension: H x L x W(with BSL1860 battery)
Weight (with BSL1860 battery)*1
Standard Accessories
32mm to 65mm
100nails
25mm to 65mm
100nails
Unique Air Drive
16mm to 50mm
100nails
3.8kg
315 x 310 x 104mm344 x 310 x 104mm 323 x 310 x 104mm
Full sequential/ Contact (Selectable)
2 x BSL1860 batteries, UC18YSL3 rapid charger with cooling system and USB port, stackable carry case, hook, nose cap and safety glasses
*1. Hook excluded.All models are also available Naked
3nails/sec. (Intermittent)
18V
NT1865DBAL DA SERIESFor NT1865DBSL C SERIESFor NT1850DBSL C1 SERIESFor
Applicable nail sizes
L 16(5/8) – 50(2)A 1.9(.075)B 1.0(.039)C 1.1(.043)D 1.25(.049)
mm (in.)A A
DB DB
C C
L L
mm (in.)L 25(1) – 65(2-1/2)A 2.8(.110)B 1.4(.054)C 1.3(.050)D 1.65(.065)
A
B
CL
D
mm (in.)L 32(1-1/4) – 65(2-1/2)A 2.4(.095)B 3.0(.12)C 1.1(.045)D 1.8(.072)
NR1890DBCL 34° CLIPPED HEADFor mm (in.)L 50(2) – 90(3-1/2)
d 2.9(.113) – 3.3(.131)D 6.8(.266) – 7.7(.303)L
d
D
3.6kg
NT1865DBAL NT1865DBSL NT1850DBSL
Nail Length
Driving System
Loading Capacity
Firing Mode
Driving Speed
Battery Voltage
Dimension: H x L x W(with BSL1860 battery)
Weight (with BSL1860 battery)*1
Standard Accessories
32mm to 65mm
100nails
25mm to 65mm
100nails
Unique Air Drive
16mm to 50mm
100nails
3.8kg
315 x 310 x 104mm344 x 310 x 104mm 323 x 310 x 104mm
Full sequential/ Contact (Selectable)
2 x BSL1860 batteries, UC18YSL3 rapid charger with cooling system and USB port, stackable carry case, hook, nose cap and safety glasses
*1. Hook excluded.All models are also available Naked
3nails/sec. (Intermittent)
18V
NT1865DBAL DA SERIESFor NT1865DBSL C SERIESFor NT1850DBSL C1 SERIESFor
Applicable nail sizes
L 16(5/8) – 50(2)A 1.9(.075)B 1.0(.039)C 1.1(.043)D 1.25(.049)
mm (in.)A A
DB DB
C C
L L
mm (in.)L 25(1) – 65(2-1/2)A 2.8(.110)B 1.4(.054)C 1.3(.050)D 1.65(.065)
A
B
CL
D
mm (in.)L 32(1-1/4) – 65(2-1/2)A 2.4(.095)B 3.0(.12)C 1.1(.045)D 1.8(.072)
NR1890DBCL 34° CLIPPED HEADFor mm (in.)L 50(2) – 90(3-1/2)
d 2.9(.113) – 3.3(.131)D 6.8(.266) – 7.7(.303)L
d
D
3.6kg
NT1865DBAL NT1865DBSL NT1850DBSL
Nail Length
Driving System
Loading Capacity
Firing Mode
Driving Speed
Battery Voltage
Dimension: H x L x W(with BSL1860 battery)
Weight (with BSL1860 battery)*1
Standard Accessories
32mm to 65mm
100nails
25mm to 65mm
100nails
Unique Air Drive
16mm to 50mm
100nails
3.8kg
315 x 310 x 104mm344 x 310 x 104mm 323 x 310 x 104mm
Full sequential/ Contact (Selectable)
2 x BSL1860 batteries, UC18YSL3 rapid charger with cooling system and USB port, stackable carry case, hook, nose cap and safety glasses
*1. Hook excluded.All models are also available Naked
3nails/sec. (Intermittent)
18V
NT1865DBAL DA SERIESFor NT1865DBSL C SERIESFor NT1850DBSL C1 SERIESFor
Applicable nail sizes
L 16(5/8) – 50(2)A 1.9(.075)B 1.0(.039)C 1.1(.043)D 1.25(.049)
mm (in.)A A
DB DB
C C
L L
mm (in.)L 25(1) – 65(2-1/2)A 2.8(.110)B 1.4(.054)C 1.3(.050)D 1.65(.065)
A
B
CL
D
mm (in.)L 32(1-1/4) – 65(2-1/2)A 2.4(.095)B 3.0(.12)C 1.1(.045)D 1.8(.072)
NR1890DBCL 34° CLIPPED HEADFor mm (in.)L 50(2) – 90(3-1/2)
d 2.9(.113) – 3.3(.131)D 6.8(.266) – 7.7(.303)L
d
D
3.6kg
NT1865DBAL NT1865DBSL NT1850DBSL
Nail Length
Driving System
Loading Capacity
Firing Mode
Driving Speed
Battery Voltage
Dimension: H x L x W(with BSL1860 battery)
Weight (with BSL1860 battery)*1
Standard Accessories
32mm to 65mm
100nails
25mm to 65mm
100nails
Unique Air Drive
16mm to 50mm
100nails
3.8kg
315 x 310 x 104mm344 x 310 x 104mm 323 x 310 x 104mm
Full sequential/ Contact (Selectable)
2 x BSL1860 batteries, UC18YSL3 rapid charger with cooling system and USB port, stackable carry case, hook, nose cap and safety glasses
*1. Hook excluded.All models are also available Naked
3nails/sec. (Intermittent)
18V
NT1865DBAL DA SERIESFor NT1865DBSL C SERIESFor NT1850DBSL C1 SERIESFor
Applicable nail sizes
L 16(5/8) – 50(2)A 1.9(.075)B 1.0(.039)C 1.1(.043)D 1.25(.049)
mm (in.)A A
DB DB
C C
L L
mm (in.)L 25(1) – 65(2-1/2)A 2.8(.110)B 1.4(.054)C 1.3(.050)D 1.65(.065)
A
B
CL
D
mm (in.)L 32(1-1/4) – 65(2-1/2)A 2.4(.095)B 3.0(.12)C 1.1(.045)D 1.8(.072)
NR1890DBCL 34° CLIPPED HEADFor mm (in.)L 50(2) – 90(3-1/2)
d 2.9(.113) – 3.3(.131)D 6.8(.266) – 7.7(.303)L
d
D
SPECIFICATIONS
ONE SYSTEM. ONE SOLUTION.FULL COMPATIBILITY WITH ENTIRE 18V SLIDE RANGE
Two Way (AC/DC) Cooling ChargerUC18YML2
Impact Driver DrillDV18DSDL
Impact Driver DrillDV18DJL
Driver DrillDS18DJL
Driver DrillDS18DSDL
Impact DriverWH18DSDL
High Torque Impact WrenchWR18DSHL
Impact WrenchWR18DSDL
IP56 Impact WrenchWR18DBDL2
IP56 Triple Hammer Impact DriverWH18DBDL2
Electronic Pulse DriverWM18DBL
125mm Angle GrinderG18DSL
125mm Angle Grinder with Paddle SwitchG18DBAL
165mm Circular SawC18DSL
125mm Circular SawC18DBL
Angle DrillDN18DSL
Rotary HammerDH18DSL
Hedge TrimmerCH18DSL
Grass TrimmerCG18DSDL
Multi ToolCV18DBL
165mm Circular SawC18DBAL
WorklightUB18DGL
Torch & Worklight UB18DJL
Wet and Dry VacuumR18DSL
Blower and VacuumRB18DSL
Digital RadioUR18DSAL
Digital Radio With BluetoothUR18DSDL
82mm PlanerP18DSL
Band SawCB18DBL
USB AdaptorBSL18UA
NEW
Impact Driver DrillDV18DBL2DV18DBL2
Jig SawCJ18DSL
Reciprocating SawCR18DBL
High Pressure WasherAW18DBL
16mm Steel Rebar CutterCF18DSL
StaplerN18DSL
20mm Steel Rebar CutterCF18DSAL
Rapid ChargerUC18YSL3
6.0Ah Li-ion BatteryBSL1860
Cordless CleanerR18DSAL
NibblerCN18DSL
18v Cordless Finish NailerNT1865DBSL
18v Cordless Finish NailerNT1865DBAL
18v Cordless Framing NailerNR1890DBCL
18v Cordless Brad NailerNT1850DBSL
Automatic Screw DriverWF18DSL
ShearCE18DSL
Driver DrillDS18DBL2DS18DBL2
Rotary HammerDH18DBL
Rotary HammerDH18DBQL
Dust Extractor402933 / 402934
NEW
NEW
Driving Type Unique Air Drive
Nail Length 50mm to 90mm
Driving Speed 1.5 to 2 nails/sec. (Intermittent)
Loading Capacity 47 nails
Firing Mode Full sequential / Contact(Selectable)
Battery Voltage 18V
Dimension: H x L (with BSL1860 battery) 342mm x 309mm
Weight (with BSL1860 battery) 4.8kg
Standard Accessories 2 x BSL1860 batteries, UC18YSL3 rapid charger with cooling system and USB port, stackable carry case, hook, 2 x hex wrenches and safety glasses
NEW
Jig SawCJ18DSL
6.0Ah Li-ion BatteryBSL1860
CE18DSL
Rotary HammerDH18DBL
Rotary HammerDH18DBQL
16GA/65MM 18GA/50MM
SPECIFICATIONS
Reciprocating SawCR18DSL
NEW NEW NEW
COMBINING CORDLESS & PNEUMATIC TECHNOLOGY!
Safer, Cleaner, Easier The New Hitachi Cordless Nailer range is safer and more comfortable to use on any jobsite than previous Gas Combustion models due to:
• Eliminating unwanted fi ring by incorporating a trigger lock • Eliminating loud combustion noise and gas fumes during Operation • Eliminating ongoing monitoring of gas cell expiration dates & storage conditions • Eliminating excessive waste and landfi ll of numerous disposable gas cells
Shock Absorption
Unique Air Drive System
Compressed air is used to drive each nail increasing power, performance and driving speed.
More Nails Per Charge Lower Running Costs
Dry-Fire Lockout Mechanism
Dual Function Trigger
Number of Nails
Comparison of Nails per Charge
Up to 2,800
Up to 2,650
Up to 1,200
NT1850DBSL18g
16g
15g
6.0Ah
NT1865DBSL6.0Ah
Up to 2,250NT1865DBAL6.0Ah
NT65GSGas 16g
120% more!
Approx.
*By a single gas container.
*
Nails with Gas Cells
Nails Only
Cost of Nails
50% cheaper!
Approx.
Furthermore, regular cleaning of a combustion chamber is not required which signifi cantly reduces the cost of servicing and down time. Combined with fewer parts to manage results in easier maintenance.
Hitachi Cordless Nailers do not require gas cells to drive nails. Therefore the more the tool is used, the more cost-effective it will be!
Prevents the nailer from being activated when the remaining nails in the magazine are very low. (NR1890DBCL, NT1865DBAL & NT1865DBSL only). A reload window is incorporated within the magazine of the NT1850DBSL to indicate a low level of nails.
Easily select between full sequential or contact mode at the touch of a button on the operation control panel.
Integrated Hook
Tool-Less Release
Tool-Less Depth Of DriveFor clearing jammed nails.
*excludes NR1890DBCL
NT1865DBSLC FINISH NAILER
NT1865DBALDA FINISH NAILER
NT1850DBSLC1 BRAD NAILER
NR1890DBCL34° CLIPPED HEADFRAMING NAILER
*excludes NR1890DBCL
LED
Shock AbsorptionA dampening system isthroughout the innerstructure of each CordlessNailer extending usercomfort.
