Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 1 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS A 400:2010 Specification for nuts, plain and slotted (unified hexagons and unified threads) for shear bolts for aircraft in corrosion-resisting steel
ACE/12 current
BS 2A 260-2A 265:2010 Specification for pan and 100$0D countersunk slotted head screws with ISO metric screw threads
ACE/12 current Confirm
BS 6S 100:2010 Aerospace series. Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube)
ACE/61 current Confirm
BS 2HC 100:2010 Procedure for inspection, testing and acceptance of iron, nickel, copper, cobalt and refractory metal base alloy castings
ACE/61 current Confirm
BS 5T 100:2010 Aerospace series. Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock
ACE/61 current Confirm
BS 4S 500:2010 Aerospace series. Procedure for inspection, testing and acceptance of steel sheet and strip
ACE/61 current Confirm
BS 4HR 601:2010 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire (maximum diameter or minor sectional dimension of 30 mm) for the manufacture of fasteners (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
ACE/61/-/48 current Confirm
BS 2HR 505:2010 Specification for nickel-chromium-iron-titanium-niobium-aluminium heat-resisting alloy round wire with a maximum diameter of 2 mm for thread inserts (nickel base Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70)
ACE/61/-/48 current Confirm
BS 2HR 55:2010 Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
ACE/61/-/48 current Confirm
BS 2HR 10:2010 Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
ACE/61/-/48 current Confirm
BS 2HR 3:2010 Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti 1.2)
ACE/61/-/48 current Confirm
BS 2HR 51:2010 Specification for high expansion heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Solution treated at 980 $0DC)
ACE/61/-/48 current Confirm
BS 2HR 6:2010 Specification for nickel-chromium- iron-
molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)
ACE/61/-/48 current Confirm
BS 2HR 4:2010 Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4)
ACE/61/-/48 current Confirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 2 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 2HR 53:2010 Specification for nickel-iron-chromium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 42.5, Cr 12.5, Mo 5.8, Ti 3.0, Fe remainder)
ACE/61/-/48 current Confirm
BS 2HR 40:2010 Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base Cr 20, W 15, Ni 10, Mn 1.5)
ACE/61/-/48 current Confirm
BS 3HR 1:2010 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
ACE/61/-/48 current Confirm
BS 2HR 506:2010 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (nickel base, Cr 19.5, Co 1.8, Ti 2.5, Al 1.5)
ACE/61/-/48 current Confirm
BS 2HR 5:2010 Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4)
ACE/61/-/48 current Confirm
BS 2HR 52:2010 Specification for heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3)
ACE/61/-/48 current Confirm
BS 3F 128:2010 Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex)
ACE/65 current Confirm
BS 1390:1990 Specification for baths made from vitreous enamelled sheet steel
B/503 confirmed (2010) Reconfirm
BS 3402:1969 Specification for quality of vitreous china sanitary appliances
B/503 confirmed (2010) Reconfirm
BS 1189:1986 Specification for baths made from porcelain
enamelled cast iron
B/503 partially replaced by
BS EN 232:2003
Reconfirm
BS 1521:1972 Specification for waterproof building papers B/546 current Confirm
BS 8000-16:1997+A1:2010
Workmanship on building sites -- Code of practice for sealing joints in buildings using sealants
B/547 partially replaced by BS 8000-0:2014
Reconfirm
BS 6213:2000+A1:2010 Selection of construction sealants. Guide B/547 current Confirm
BS 5502-50:1993+A2:2010
Buildings and structures for agriculture -- Code of practice for design, construction and use of storage tanks and reception pits for livestock slurry
B/549 current Confirm
BS 8204-1:2003+A1:2009
Screeds, bases and in situ floorings -- Concrete bases and cementitious levelling screeds to receive floorings. Code of practice
CB/300 current Confirm
BS 8204-6:2008+A1:2010
Screeds, bases and in situ floorings -- Synthetic resin floorings. Code of practice
CB/300 current Confirm
BS 5550-2.11.2:1980 Cinematography. 16 mm film. Spindles -- Specification for dimensions of precision grade spindles for 16 mm cinematograph equipment and telecine machines
CPW/36 partially replaced by BS 5550-2.11.1:1978
BS 8519:2010 Selection and installation of fire-resistant power and control cable systems for life safety and fire-fighting applications. Code of practice
FSH/1 current Confirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 3 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 5482-1:2005 Code of practice for domest butane- and propane-gas-burning install's – Install’s at perm dwellings, residential prk homes and commercial prem’s, with install’n pipework sizes not exceeding DN 25_steel and DN 28_corrugated stainless steel or copper
GSE/24 confirmed (2010)
BS 5885-2:1987 Automatic gas burners -- Specification for packaged burners with input rating 7.5 kW up to but excluding 60 kW
GSE/27 partially replaced by BS EN 676:1997
Withdraw
BS 5885-1:1988 Automatic gas burners -- Specification for burners with input rating 60 kW and above
GSE/27 partially replaced by BS EN 676:1997
Withdraw
BS 6580:2010 Specification for corrosion inhibiting, engine coolant concentrate ("antifreeze")
I/- current Withdraw
BS 4971:2002 Repair and allied processes for the conservation of documents. Recommendations
IDT/2/9 confirmed (2008) Reconfirm
BS 6200-3.0:2002 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis -- Reference methods of analysis. Summary of methods
ISE/102 confirmed (2008) Reconfirm
BS 6200-2.1:1993 Sampling and analysis of iron, steel and other ferrous metals. Sampling and sample preparation -- Methods for iron and steel
ISE/102 confirmed (2008) Reconfirm
BS 8766:2004 Names and identifiers of individuals and groups. Data structure for interoperability. Specification
IST/36 confirmed (2010) Withdraw
BS 6811-1.1:1987 Winding wires. Basic dimensions -- Specification for diameters of conductors for round winding wires
L/-/99 obsolescent (2008) Withdraw
BS 826:1978 Specification for steel single tier bolted shelving (angle upright type)
MHE/8 confirmed (2008) Withdraw
BS 4680:1996 Specification for clothes lockers MHE/8 confirmed (2008) Reconfirm
BS 4345:1968 Specification for slotted angles MHE/8 confirmed (2008) Withdraw
BS 8438:2004+A1:2010 Troughed belt conveyors. Specification MHE/9 current Confirm
BS 4607-5:1982+A3:2010
Non-metallic conduit fittings for electrical installations -- Specification for rigid conduits, fittings and boxes of insulating material
PEL/213 current Confirm
BS 4607-1:1984+A2:2010
Non-metallic conduits and fittings for electrical installations -- Specification for fittings and components of insulating material
PEL/213 current Confirm
BS 31:1940 Specification. Steel conduit and fittings for electrical wiring
PEL/213 obsolescent (2011) Withdraw
BS 7825-3.6:1997 Calibration of rubber and plastics test equipment. Calibration schedules -- Dimensional properties
PRI/20 obsolescent (2008) Withdraw
BS 6996:2003 Mineral oil resistant acrylonitrile-butadiene rubber compounds. Specification
PRI/54 confirmed (2008) Reconfirm
BS 3227:2003 Butyl rubber compounds (including halobutyl compounds). Specification
PRI/54 confirmed (2008) Reconfirm
BS 6014:2003 Ethylene propylene rubber compounds. Specification
PRI/54 confirmed (2008) Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 4 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 2752:2003 Chloroprene rubber compounds. Specification PRI/54 confirmed (2008) Reconfirm
BS 1154:2003 Natural rubber compounds. Specification PRI/54 confirmed (2008) Reconfirm
BS 7619:2010 Extruded cellular unplasticized white PVC (PVC-UE) profiles. Specification
PRI/82 current Confirm
BS 7291-3:2010 Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings -- Specification for crosslinked polyethylene (PE-X) pipes and associated fittings
PRI/88 current
BS 7291-2:2010 Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings -- Specification for polybutylene (PB) pipe and associated fittings
PRI/88 current
BS 7291-1:2010 Thermoplastics pipe and fitting systems for hot
and cold water for domestic purposes and heating installations in buildings -- General requirements
PRI/88 current
BS 3505:1986 Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold potable water
PRI/88 replaced by BS EN 1452-1:1999, BS EN 1452-2:1999, BS EN 1452-3:1999, BS EN 1452-4:1999 and BS EN 1452-5:1999
Reconfirm
BS 8303-1:1994 Installation of domestic heating and cooking appliances burning solid mineral fuels -- Installation of domestic heating and cooking appliances burning solid mineral fuels. Specification for the design of installations
RHE/28 current
BS 8511:2010 Code of practice for the installation of solid fuel heating and cooking appliances in small craft
RHE/28/-/1 current Confirm
BS 5073:1982 Guide to stowage of goods in freight containers TW/1 confirmed (2008)
BS 5380:1984 Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads
MCE/18 confirmed (2010) Reconfirm
BS 8465:2010 Hydraulic fluid power. Monitoring the level of particulate contamination. Comparison membrane technique
MCE/18 current Confirm
BS 6537:1984 Specification for staple type connectors for hydraulic fluid power applications
MCE/18 confirmed (2010) Reconfirm
BS 5200:1997 Specification for dimensions of hydraulic connectors and adaptors
MCE/18 confirmed (2010) Reconfirm
BS 4521-3.2:1975 Specification for railway turnouts for private users. Medium grade turnouts over which British
Railways locomotives do not operate, for axle loads not exceeding 25 tons -- Turnouts using flat bottom rails
RAE/2 confirmed (2010) Withdraw
BS 4521-3.1:1974 Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons -- Turnouts using bull head rail
RAE/2 confirmed (2010) Withdraw
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 5 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 4521-4:1975 Specification for railway turnouts for private users -- Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 tons, using flat bottom rails
RAE/2 confirmed (2010) Withdraw
BS 4521-2:1975 Specification for railway turnouts for private users -- Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons, using flat bottom rails
RAE/2 confirmed (2010) Withdraw
BS 4521-1.2:1971 Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate -- Turnouts using flat bottom rail
RAE/2 confirmed (2010) Withdraw
BS 4521-1.1:1971 Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate -- Turnouts using bull head rails
RAE/2 confirmed (2010) Withdraw
BS 64:1992 Specification for normal and high strength steel bolts and nuts for railway rail fishplates
RAE/2 confirmed (2010) Reconfirm
BS 7865:1997 Specification for steel electrical conductor rail for railway motive power supply
RAE/2 confirmed (2010) Reconfirm
BS 47-1:1991 Fishplates for railway rails -- Specification for rolled steel fishplates
RAE/2 confirmed (2010) Reconfirm
BS 5892-3:1992+A2:2009
Railway rolling stock materials -- Specification for monobloc wheels for traction and trailing stock
RAE/3/-/1 confirmed (2010) Reconfirm
BS 5892-6:1992 Railway rolling stock materials -- Specification for wheelsets for traction and trailing stock
RAE/3/-/1 confirmed (2010) Reconfirm
BS 5892-2:1992 Railway rolling stock materials -- Specification for forged and rolled wheel centres
RAE/3/-/1 confirmed (2010) Reconfirm
BS 5892-4:1992 Railway rolling stock materials -- Specification for
forged and rolled tyres
RAE/3/-/1 confirmed (2010) Reconfirm
BS AU 170:1979 Methods for measurement of reflectance of rear view mirrors
AUE/12 confirmed (2010) Reconfirm
BS 5395-1:2010 Stairs -- Code of practice for the design of stairs with straight flights and winders
B/208 current Confirm
BS 6465-4:2010 Sanitary installations -- Code of practice for the provision of public toilets
B/209/-/2 current Reconfirm
BS 3998:2010 Tree work. Recommendations B/213 current Confirm
PD 6682-7:2003 Aggregates -- Armourstone. Guidance on the use of BS EN 13383
B/502 current Confirm
BS 8427:2004 Jug water filter systems. Specification B/504 confirmed (2010) Reconfirm
BS 5911-1:2002+A2:2010
Concrete pipes and ancillary concrete products -- Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and
fittings with flexible joints (complementary to BS EN 1916:2002)
B/505 current
BS 5911-4:2002+A2:2010
Concrete pipes and ancillary concrete products -- Specification for unreinforced and reinforced concrete inspection chambers (complementary to BS EN 1917:2002)
B/505 current Confirm
BS 65:1991 Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings
B/505 confirmed (2010) Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 6 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 5911-5:2004+A1:2010
Concrete pipes and ancillary concrete products -- Specification for prestressed non-pressure pipes and fittings with flexible joints
B/505 current Confirm
BS 5911-6:2004+A1:2010
Concrete pipes and ancillary concrete products -- Specification for road gullies and gully cover slabs
B/505 current
BS 9295:2010 Guide to the structural design of buried pipelines B/505 current
BS 6999:1989 Specification for vitreous-enamelled low-carbon-steel flue pipes, other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW
B/506 confirmed (2010)
BS 41:1973 Specification for cast iron spigot and socket flue or smoke pipes and fittings
B/506 confirmed (2010)
BS 567:1973 Specification for asbestos-cement flue pipes and fittings, light quality
B/506 confirmed (2010)
BS 835:1973 Specification for asbestos-cement flue pipes and fittings, heavy quality
B/506 confirmed (2010)
BS 5854:1980 Code of practice for flues and flue structures in buildings
B/506 confirmed (2010) Reconfirm
BS 7533-7:2010 Pavements constructed with clay, natural stone or concrete pavers -- Code of practice for the construction of pavements of natural stone paving units and cobbles, and rigid construction with concrete block paving
B/507 current Confirm
BS 7533-10:2010 Pavements constructed with clay, natural stone or concrete pavers -- Guide for the structural design of trafficked pavements constructed of natural stone setts and bound construction with concrete paving blocks
B/507 current Confirm
BS 7533-9:2010 Pavements constructed with clay, natural stone or concrete pavers -- Code of practice for the construction of rigid pavements of clay pavers
B/507 current Confirm
BS 598-110:1998 Sampling and examination of bituminous mixtures for roads and other paved areas -- Methods of test for the determination of wheel-tracking rate and depth
B/510/1 current Confirm
BS 598-112:2004 Sampling and examination of bituminous mixtures for roads and other paved areas -- Method for the use of road surface hardness probe
B/510/2 confirmed (2010) Reconfirm
BS 5507-1:1977 Methods of test for falsework equipment -- Floor centres
B/514 confirmed (2010) Reconfirm
BS 5507-3:1982 Methods of test for falsework equipment -- Props B/514 partially replaced by BS EN 1065:1999
BS 6037-2:2004 Code of practice for the planning, design,
installation and use of permanently installed access equipment -- Travelling ladders and gantries
B/514/39 confirmed (2010)
BS 5974:2010 Code of practice for the planning, design, setting up and use of temporary suspended access equipment
B/514/39 current
BS 6089:2010 Assessment of in-situ compressive strength in structures and precast concrete components. Complementary guidance to that given in BS EN 13791
B/517/1 current Confirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 7 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 4315-2:1970 Methods of test for resistance to air and water penetration -- Permeable walling constructions (water penetration)
B/519/1 confirmed (2010) Reconfirm
BS 493:1995+A1:2010 Specification for airbricks and gratings for wall ventilation
B/519/1 current Confirm
BS 5977-1:1981 Lintels -- Method for assessment of load B/519/3 confirmed (2010) Reconfirm
BS 8000-2.2:1990 Workmanship on building sites. Code of practice for concrete work -- Sitework with in situ and precast concrete
B/525/2 partially replaced by BS 8000-0:2014
Withdraw
PD 6687-1:2010 Background paper to the National Annexes to BS EN 1992-1 and BS EN 1992-3
B/525/2 current Confirm
PD 6697:2010 Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2
B/525/6 current
BS 8008:1996+A1:2008 Safety precautions and procedures for the
construction and descent of machine-bored shafts for piling and other purposes
B/526 confirmed (2010) Reconfirm
CP 2012-1:1974 Code of practice for foundations for machinery -- Foundations for reciprocating machines
B/526 confirmed (2010) Withdraw
BS 1377-6:1990 Methods of test for soils for civil engineering purposes -- Consolidation and permeability tests in hydraulic cells and with pore pressure measurement
B/526/3 confirmed (2010) Reconfirm
BS 1377-5:1990 Methods of test for soils for civil engineering purposes -- Compressibility, permeability and durability tests
B/526/3 confirmed (2010) Reconfirm
BS 1377-1:1990 Methods of test for soils for civil engineering purposes -- General requirements and sample preparation
B/526/3 confirmed (2010)
BS 1377-8:1990 Methods of test for soils for civil engineering purposes -- Shear strength tests (effective stress)
B/526/3 confirmed (2010) Reconfirm
BS 1377-3:1990 Methods of test for soils for civil engineering purposes -- Chemical and electro-chemical tests
B/526/3 confirmed (2010)
BS 1377-7:1990 Methods of test for soils for civil engineering purposes -- Shear strength tests (total stress)
B/526/3 confirmed (2010) Reconfirm
BS 1377-4:1990 Methods of test for soils for civil engineering purposes -- Compaction-related tests
B/526/3 confirmed (2010) Reconfirm
BS 5930:1999+A2:2010 Code of practice for site investigations B/526/3 partially replaced by BS EN ISO 14688-1:2002, BS EN ISO 14688-2:2004, BS EN ISO 14689-1:2003, BS EN ISO
22475-1:2006, BS EN ISO 22476-2:2005, BS EN ISO 22476-3:2005, BS EN 1997-2:2007, BS EN ISO 22282-1:2012, BS EN ISO 22282-2:2012, BS EN ISO 22282-3:2012, BS EN ISO 22282-4:2012, BS EN ISO 22282-5:2012, BS EN ISO
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 8 of 18 May 2015
22282-6:2012, BS EN ISO 22476-
1:2012, BS EN ISO 22476-7:2012, BS EN ISO 22476-5:2012 and BS EN ISO 22476-4:2012
BS 8006-1:2010 Code of practice for strengthened/reinforced soils and other fills
B/526/4 current
BS 7722:2010 Surface covered PVC-U profiles for windows and doorsets. Specification
B/538/1 current Confirm
BS 6510:2010 Steel-framed windows and glazed doors. Specification
B/538/1 current Confirm
BS 4787-1:1980 Internal and external wood doorsets, door leaves and frames -- Specification for dimensional requirements
B/538/2 confirmed (2010) Reconfirm
BS 8529:2010 Composite doorsets. Domestic external doorsets. Specification
B/538/2 current
BS 8530:2010 Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification
B/542/6 current Confirm
BS 8298-4:2010 Code of practice for the design and installation of natural stone cladding and lining -- Rainscreen and stone on metal frame cladding systems
B/545 current Confirm
BS 8298-3:2010 Code of practice for the design and installation of natural stone cladding and lining -- Stone-faced pre-cast concrete cladding systems
B/545 current Confirm
BS 8298-2:2010 Code of practice for the design and installation of natural stone cladding and lining -- Traditional handset external cladding
B/545 current Confirm
BS 8298-1:2010 Code of practice for the design and installation of
natural stone cladding and lining -- General
B/545 current Confirm
BS 8300:2009+A1:2010 Design of buildings and their approaches to meet the needs of disabled people. Code of practice
B/559 current
BS 8493:2008+A1:2010 Light reflectance value (LRV) of a surface. Method of test
B/559 current Confirm
PD 25666:2010 Business continuity management. Guidance on exercising and testing for continuity and contingency programmes
BCM/1 current Confirm
PD 25111:2010 Business continuity management. Guidance on human aspects of business continuity
BCM/1 current Confirm
PD 6612:2004 Guidance on the preparation of codes of practice for building
CB/10 current Confirm
BS 6100-0:2010 Building and civil engineering. Vocabulary -- Introduction and index
CB/101/-/2 current Confirm
BS 6349-2:2010 Maritime works -- Code of practice for the design of quay walls, jetties and dolphins
CB/502 current Confirm
BS 8525-1:2010 Greywater systems -- Code of practice CB/506 current Confirm
BS 5682:1998 Specification for probes (quick connectors) for use with medical gas pipeline systems
CH/121/1 current
BS 6788-2:1990 Neurosurgical implants -- Specification for marking and packaging of implantable neural stimulators
CH/150/2 confirmed (2010) Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 9 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 2738-3:2004+A1:2008
Spectacle lenses -- Specification for the presentation of prescriptions and prescription orders for ophthalmic lenses
CH/172/3 confirmed (2010) Reconfirm
BS 6734:2004 Antimicrobial efficacy of disinfectants for veterinary and agricultural use. Method
CH/216 confirmed (2010) Reconfirm
BS 7114-3:1988 Fireworks -- Methods of test for fireworks CII/47 partially replaced by BS EN 14035 parts and DD 14035:2007
Reinstate
BS 7114-1:1988 Fireworks -- Classification of fireworks CII/47 obsolescent (2010) Reinstate
BS 7114-2:1988 Fireworks -- Specification for fireworks CII/47 obsolescent (2010) Reinstate
BS 5285:1975 Specification. Performance of a.c. electric ventilating fans and regulators for non-industrial use
CPL/59 confirmed (2010) Reconfirm
BS 8423:2010 Fireguards for fires and heating appliances for domestic use. Specification
CW/1 current
BS 8580:2010 Water quality. Risk assessments for Legionella control. Code of practice
EH/3/4 current Confirm
BS 5266-6:1999 Emergency lighting -- Code of practice for non-electrical low mounted way guidance systems for emergency use. Photoluminescent systems
EL/1/1 confirmed (2010)
BS 5266-4:1999 Emergency lighting -- Code of practice for design, installation, maintenance and use of optical fibre systems
EL/1/1 confirmed (2010) Reconfirm
BS 5266-2:1998 Emergency lighting -- Code of practice for electrical low mounted way guidance systems for emergency use
EL/1/1 confirmed (2010)
BS 5266-5:1999 Emergency lighting -- Specification for component parts of optical fibre systems
EL/1/1 confirmed (2010) Reconfirm
BS 5489-2:2003+A1:2008
Code of practice for the design of road lighting -- Lighting of tunnels
EL/1/2 current
BS 6657:2002 Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation. Guide
EXL/31 replaced by PD CLC/TR 50426:2004
Confirm
BS 6656:2002 Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide
EXL/31 replaced by PD CLC/TR 50427:2004
Withdraw
BS 5958-1:1991 Code of practice for control of undesirable static electricity -- General considerations
EXL/31 replaced by PD CLC/TR 50404:2003
Withdraw
BS 7371-4:1994 Coatings on metal fasteners -- Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings
FME/9 confirmed (2010) Reconfirm
BS 7371-7:2010 Coatings on metal fasteners -- Specification for mechanically applied zinc and zinc based coatings
FME/9 current Confirm
BS 7805-2:1997 Swaged collar grooved rivets -- Specification for sizes from 12.7 mm up to and including 34.9 mm
FME/9 confirmed (2010) Reconfirm
BS 7855-1:1996 Metric rivets for the attachment of friction linings -- Specification for semi-tubular rivets
FME/9 confirmed (2010) Reconfirm
BS 4933:2010 Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
FME/9 current Confirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 10 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 7805-1:1995 Swaged collar grooved rivets -- Specification for sizes up to and including 10 mm diameter
FME/9 confirmed (2010) Reconfirm
BS 7371-9:1996 Coatings on metal fasteners -- Specification for phosphate or phosphate and oil coatings
FME/9 confirmed (2010) Reconfirm
BS 7371-2:1993 Coatings on metal fasteners -- Specification for torque/clamping force relationship
FME/9 confirmed (2010) Reconfirm
BS 4894:1993 Specification for bifurcated rivets for general purpose use (metric series)
FME/9 confirmed (2010) Reconfirm
BS 7371-10:1994 Coatings on metal fasteners -- Specification for organic coatings
FME/9 confirmed (2010) Reconfirm
BS 5346:1976 Specification. ISO metric trapezoidal screw threads
FME/9 confirmed (2010) Reconfirm
BS 641:1951 Dimensions of small rivets for general purposes FME/9 obsolescent (2010) Withdraw
BS 1726-1:2010 Cylindrical helical springs made from round wire
and bar. Guide to methods of specifying and tolerancing hot coiled springs, and cold coiled springs not covered by BS EN 15800, and general spring testing -- Compression springs
FME/9/3 current Confirm
BS 8536:2010 Facility management briefing. Code of practice FMW/1 current
PD 6531:2010 Queries and interpretations on BS 5839-1 FSH/12/1 current Confirm
PD 6512-3:1987 Use of elements of structural fire protection with particular reference to the recommendations given in BS 5588 'Fire precautions in the design and construction of buildings' -- Guide to the fire performance of glass
FSH/14 current Confirm
BS 1635:1990 Recommendations for graphic symbols and abbreviations for fire protection drawings
FSH/14 current Confirm
BS 9999:2008 Code of practice for fire safety in the design, management and use of buildings
FSH/14 current Under revision
BS 7899-2:1999 Code of practice for assessment of hazard to life and health from fire -- Guidance on methods for the quantification of hazards to life and health and estimation of time to incapacitation and death in fires
FSH/16 confirmed (2010) Reconfirm
PD 6503-2:1988 Toxicity of combustion products -- Guide to the relevance of small-scale tests for measuring the toxicity of combustion products of materials and composites
FSH/16 confirmed (2010) Reconfirm
BS 7899-1:1997 Code of practice for assessment of hazard to life and health from fire -- General guidance
FSH/16 confirmed (2010) Reconfirm
BS 336:2010 Specification for fire hose couplings and ancillary equipment
FSH/17/8 current Confirm
BS 6165:2002 Specification for small disposable fire extinguishers of the aerosol type
FSH/2 confirmed (2010) Reconfirm
BS 476-6:1989+A1:2009
Fire tests on building materials and structures -- Method of test for fire propagation for products
FSH/21 current Confirm
BS 476-3:2004 Fire tests on building materials and structures -- Classification and method of test for external fire exposure to roofs
FSH/22/-/8 current Confirm
BS 7346-4:2003 Components for smoke and heat control systems -- Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires. Code of practice
FSH/25 confirmed (2008)
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 11 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 4875-8:1998 Furniture. Strength and stability of furniture -- Methods for determination of stability of non-domestic storage furniture
FW/0/2 confirmed (2010) Withdraw
BS 5459-2:2000+A2:2008
Specification for performance requirements and tests for office furniture -- Office pedestal seating for use by persons weighing up to 150kg and for use up to 24 hours a day, including type-approval tests for individual components
FW/0/3 confirmed (2010) Reconfirm
BS 6807:1986 Methods of test for the ignitability of mattresses with primary and secondary sources of ignition
FW/6 replaced by BS 6807:1990
Confirm
BS 8491:2008 Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems
GEL/20/18 current Confirm
BS 7967-5:2010 CO2 in dwellings and other premises and combustion performance of gas-fired appliances - Guide for using electronic portable combustion gas analysers in non-domestic premises for measurement of CO and CO2 and determination of combustion performance
GSE/30 current Confirm
BS 5546:2010 Specification for installation and maintenance of gas-fired water-heating appliances of rated input not exceeding 70 kW net
GSE/30 current Confirm
BS 6172:2010 Specification for installation, servicing and maintenance of domestic gas cooking appliances (2nd and 3rd family gases)
GSE/30/-/10 current Confirm
BS 5864:2010 Installation and maintenance of gas-fired ducted
air heaters of rated heat input not exceeding 70 kW net (2nd and 3rd family gases). Specification
GSE/30/-/7 current Confirm
DD 263:2010 Intruder and hold-up alarm systems. Commissioning, maintenance and remote support. Code of practice
GW/1/2 current
PD 6662:2010 Scheme for the application of European standards for intrusion and hold-up alarm systems
GW/1/2 current
BS 8517-2:2010 Security dogs -- Code of practice for the use of detection dogs
GW/3 current
BS 7659:1994 Specification for dog muzzles GW/3 confirmed (2010) Reconfirm
PD 0018:2001 Information management systems. Building systems fit for audit
ICT/- confirmed (2010) Reconfirm
BS 4811:1972 Specification for the presentation of research and development reports
IDT/2 confirmed (2010) Reconfirm
PD 0017:2001 Business documents. Guidance on effective layout and presentation
IDT/2 confirmed (2010) Reconfirm
BS 2979:1958 Transliteration of Cyrillic and Greek characters IDT/2 confirmed (2010) Reconfirm
BS 4812:1972 Specification for the romanization of Japanese IDT/2 confirmed (2010) Reconfirm
BS 7581:1992 Guide to presentation of tables and graphs IDT/2 confirmed (2010) Reconfirm
BS 4280:1968 Transliteration of Arabic characters IDT/2 confirmed (2010) Reconfirm
BS 7014:1989 Guide to the romanization of Chinese IDT/2 confirmed (2010) Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 12 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 5605:1990 Recommendations for citing and referencing published material
IDT/2/2 confirmed (2010) Reconfirm
BS 6371:1983 Recommendations for citation of unpublished documents
IDT/2/2 confirmed (2010) Reconfirm
BS 7448-3:2005 Fracture mechanics toughness tests -- Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
ISE/101 current Confirm
BS 7448-4:1997 Fracture mechanics toughness tests -- Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials
ISE/101 confirmed (2007) Reconfirm
BS 131-7:1998 Notched bar tests -- Specification for verification of the test machine used for precision determination of Charpy V-notch impact energies
for metals
ISE/101 confirmed (2010) Reconfirm
BS 131-6:1998 Notched bar tests -- Method for precision determination of Charpy V-notch impact energies for metals
ISE/101 confirmed (2010) Reconfirm
BS 7996:2009 Torque measuring devices. Calibration and classification using continual torque application. Method
ISE/101 current Confirm
BS 3518-1:1993 Methods of fatigue testing -- Methods of fatigue testing. Guide to general principles
ISE/101 confirmed (2009) Reconfirm
BS 7270:2006 Metallic materials. Constant amplitude strain controlled axial fatigue. Method of test
ISE/101 current Confirm
BS 131-4:1972 Notched bar tests -- Calibration of pendulum impact testing machines for metals
ISE/101 partially replaced by BS EN 10045-2:1993
Withdraw
BS 6888:1988 Methods for calibration of bonded electrical resistance strain gauges
ISE/101 confirmed (2007) Reconfirm
BS 8422:2003 Force measurement. Strain gauge load cell systems. Calibration method
ISE/101 confirmed (2008) Reconfirm
BS 7882:2008 Method for calibration and classification of torque measuring devices
ISE/101 current Confirm
BS 3518-3:1963 Methods of fatigue testing -- Direct stress fatigue tests
ISE/101 confirmed (2009) Reconfirm
BS 131-1:1961 Notched bar tests -- The Izod impact test of metals
ISE/101 confirmed (2007) Reconfirm
BS 131-5:1965 Notched bar tests -- Determination of crystallinity ISE/101 confirmed (2007) Reconfirm
BS 7668:2004 Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification
ISE/103 confirmed (2010)
BS 8666:2005 Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete. Specification
ISE/104 current Confirm
BS 5046:1974 Method for the estimation of equivalent diameters in the heat treatment of steel
ISE/105 confirmed (2010) Reconfirm
BS 2772-2:1989 Colliery haulage and winding equipment. -- Specification for wrought steel
ISE/105 confirmed (2010) Reconfirm
BS 1407:1970 Specification for high carbon bright steel (silver steel)
ISE/105 confirmed (2010) Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 13 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 6404-20:1996 Magnetic materials -- Resistance and temperature classification of insulation coatings
ISE/108 confirmed (2010) Reconfirm
BS 1449-1.14:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip -- Specification for hot rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes
ISE/109 confirmed (2010) Reconfirm
BS 1449-1.8:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip -- Specification for hot rolled narrow strip based on formability
ISE/109 confirmed (2010) Reconfirm
BS 1449-1.1:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip -- General specification
ISE/109 confirmed (2010) Reconfirm
BS 4825-1:1991+A2:2009
Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for tubes
ISE/110 partially replaced by BS EN 10357:2013
Confirm
PD 0028:2002 Quantitative software management. Software measurement methods. A guide to the use of ISO/IEC and other standards for obtaining and using software measurements for product and process improvement
IST/15 confirmed (2010) Reconfirm
PD 6631:1998 Technical guide to ISO/IEC 13522-5:1997. Information technology. Coding of multimedia and hypermedia information. Support for base-level interactive applications (MHEG-5)
IST/37 confirmed (2010) Reconfirm
PD 0006:1995 Technical guide to JPEG. Digital compression of photographic images
IST/37 confirmed (2010) Reconfirm
PD 6777:2003 Guide to practical implementation of JPEG 2000 IST/37 confirmed (2010) Reconfirm
BS 8878:2010 Web accessibility. Code of practice IST/45 current Confirm
BS 2975-1:2004 Sampling and analysis of glass-making sands -- Methods for sampling and physical testing of glass-making sands
LBI/1/2 confirmed (2010) Reconfirm
BS 1428-D4:1963 Microchemical apparatus. Volumetric analysis -- Specification for capillary pipettes
LBI/1/2 confirmed (2010) Reconfirm
BS 5248:1990 Specification for aspirated hygrometer LBI/1/2 confirmed (2010) Reconfirm
BS 7121-4:2010 Code of practice for safe use of cranes -- Lorry loaders
MHE/3/11 current Confirm
BS 5656-2:2004 Escalator and moving walks. Safety rules for the construction and installation of escalators and moving walks -- Code of practice for the selection, installation and location of new escalators and moving walks
MHE/4 confirmed (2010) Reconfirm
BS 6079-1:2010 Project management -- Principles and guidelines for the management of projects
MS/2 current
BS 7000-3:1994 Design management systems -- Guide to managing service design
MS/4 current Confirm
BS 8537:2010 Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes
NFE/34/3 current
PD 6699-3:2010 Nanotechnologies -- Guide to assessing airborne exposure in occupational settings relevant to nanomaterials
NTI/1 current Confirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 14 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 7654:2010 Specification for single-phase street lighting cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture
PEL/121/1 current Confirm
BS 7657:2010 Specification for cut-out assemblies up to 100 A rating, for power supply to buildings
PEL/121/1 current
BS 7375:2010 Distribution of electricity on construction and demolition sites. Code of practice
PEL/121/2 current
BS 7647:1993 Specification for radio teleswitches for tariff and load control
PEL/13 confirmed (2010) Withdraw
BS 6626:2010 Maintenance of electrical switchgear and controlgear for voltages above 1 kV and up to and including 36 kV. Code of practice
PEL/17/1 current Confirm
BS 822-6:2004 Terminal markings for electrical machinery and apparatus -- Lead colours for rotating electrical machinery
PEL/2 confirmed (2010) Reconfirm
BS 4999-141:2004+A1:2010
General requirements for rotating electrical machines -- Specification for standard dimensions
PEL/2 current Confirm
BS 8488:2009+A1:2010 Prefabricated wiring systems intended for permanent connection in fixed installations. Specification
PEL/23 current Confirm
BS 842:1965 Specification for a.c. voltage-operated earth-leakage circuit breakers
PEL/23 confirmed (2010) Reconfirm
BS 4177:1992 Specification for cooker control units PEL/23 confirmed (2010) Reconfirm
DD 253:2001 Mouthguards for use in sport and recreation. Requirements and test methods
PH/3/11 current
BS 7971-7:2003 Protective clothing and equipment for use in violent situations and in training -- Slash resistant gloves. Requirements and test methods
PH/3/12 current Confirm
BS 7971-1:2002 Protective clothing and equipment for use in violent situations and in training -- General requirements
PH/3/12 confirmed (2007) Reconfirm
BS 8428:2004 Protective clothing. Protection against liquid chemicals. Performance requirements for chemical protective suits with liquid-tight connections between different parts of the clothing for emergency teams (type 3-ET equipment)
PH/3/3 confirmed (2010) Reconfirm
BS 8468-2:2006 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -- Negative pressure, air purifying devices with full face mask. Specification
PH/4 current Confirm
BS 8468-4:2008 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -- Powered air-purifying respirators. Specification
PH/4 current Confirm
BS 10999:2010 Specification for distress signal units for the fire and rescue service
PH/4 current Confirm
BS 7963:2000 Ergonomics of the thermal environment. Guide to the assessment of heat strain in workers wearing personal protective equipment
PH/9 confirmed (2006) Reconfirm
BS 7915:1998 Ergonomics of the thermal environment. Guide to design and evaluation of working practices for cold indoor environments
PH/9 confirmed (2006) Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 15 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 7195:1989+A1:2010 Guide for prevention of corrosion of metals caused by vapours from organic materials
PKW/0 current Confirm
BS 2782-7:Method 720B:1979
Methods of testing plastics. Rheological properties -- Cup flow of phenolic and alkyd moulding materials
PRI/21 confirmed (2010) Reconfirm
BS 1782:1951 Specification for couplings for suction and delivery hose (1$9H in. to 8 in. nominal sizes) other than fire hose couplings
PRI/66 obsolescent (2012) Reinstate
BS 2464:1954 Specification for hose couplings for petrol, oil and lubricants ($9L in. to 4 in. nominal sizes)
PRI/66 obsolescent (2012) Reinstate
BS 1906:1952 Specification for hose couplings (air and water) ($9B in. to 1$9D in. nominal sizes)
PRI/66 obsolescent (2012) Reinstate
BS 2952:1958 Specification for rubber hose for i.c. engine cooling systems
PRI/66 obsolescent (2012) Withdraw
CP 2010-2:1970 Code of practice for pipelines -- Design and construction of steel pipelines in land
PSE/17 confirmed (2010) Reconfirm
BS 5998:1983 Specification for quality levels for steel valve castings
PSE/18/1 confirmed (2007) Reconfirm
BS 6364:1984 Specification for valves for cryogenic service PSE/18/1 confirmed (2007) Reconfirm
BS 2000-346:1996 Methods of test for petroleum and its products -- Determination of polycyclic aromatics in unused lubricating base oils and asphaltene free petroleum fractions. Dimethyl sulphoxide extraction refractive index method
PTI/13 confirmed (2010) Reconfirm
BS 2000-272:2000 Methods of test for petroleum and its products -- Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG). Electrometric titration method
PTI/13 confirmed (2010) Reconfirm
BS 2000-450:2000 Methods of test for petroleum and its products -- Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method
PTI/13 confirmed (2010) Reconfirm
BS 2000-317:1995 Methods of test for petroleum and its products -- Determination of residues in liquefied petroleum gases. Low temperature evaporation method
PTI/13 confirmed (2010) Reconfirm
BS 2000-213:1993 Methods of test for petroleum and its products -- Determination of neutralization value of bitumen. Colour indicator titration method
PTI/13 confirmed (2010) Reconfirm
BS 2000-456:2000 Methods of test for petroleum and its products -- Determination of potassium in gasoline. Atomic absorption spectrometry (AAS) method
PTI/13 confirmed (2010) Reconfirm
BS 2000-0-1:1999 Methods of test for petroleum and its products. General introduction -- Section 0.1: Specifications - IP standard for thermometers
PTI/13 confirmed (2010) Reconfirm
BS 2000-1:1995 Methods of test for petroleum and its products -- Determination of acidity, neutralization value. Colour indicator titration method
PTI/13 confirmed (2010) Reconfirm
BS 2000-142:1993 Methods of test for petroleum and its products -- Determination of oxidation stability of lubricating grease. Oxygen bomb method
PTI/13 confirmed (2010) Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 16 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 2000-195:1998 Methods of test for petroleum and its products -- Determination of distillation characteristics of volatile organic liquids
PTI/13 confirmed (2010) Reconfirm
BS 2000-0-2:1996 Methods of test for petroleum and its products. General introduction -- Specifications for IP standard reference liquids
PTI/13 confirmed (2010) Reconfirm
BS 2000-137:1993 Methods of test for petroleum and its products -- Determination of oil content of water mix metalworking oil dilutions
PTI/13 confirmed (2010) Reconfirm
BS 2000-223:1993 Methods of test for petroleum and its products -- Determination of ash of petroleum products containing mineral matter
PTI/13 confirmed (2010) Reconfirm
BS 2000-454:2000 Methods of test for petroleum and its products -- Determination of phosphorus in gasoline.
Spectrophotometric method
PTI/13 confirmed (2010) Reconfirm
BS 2000-35:1993 Methods of test for petroleum and its products -- Determination of open flash and fire point. Pensky-Martens method
PTI/13 confirmed (2010) Reconfirm
BS 2000-313:2001 Methods of test for petroleum and its products -- Determination of air release of lubricating and hydraulic oils
PTI/13 confirmed (2010) Reconfirm
BS 2000-133:1993 Methods of test for petroleum and its products -- Determination of drop melting point of wax and petrolatum
PTI/13 confirmed (2010) Reconfirm
BS 2000-76:1993 Methods of test for petroleum and its products -- Determination of congealing point of waxes and petrolatum
PTI/13 confirmed (2010) Reconfirm
BS 2000-61:1999 Methods of test for petroleum and its products -- Determination of sulfur. High pressure combustion method
PTI/13 confirmed (2010) Reconfirm
BS 2000-50:1993 Methods of test for petroleum and its products -- Determination of cone penetration of lubricating grease
PTI/13 confirmed (2010) Reconfirm
BS 2000-0-4:1996 Methods of test for petroleum and its products. General introduction -- Barometric pressure corrections
PTI/13 confirmed (2010) Reconfirm
BS 2000-107:1993 Methods of test for petroleum and its products -- Determination of sulfur. Lamp combustion method
PTI/13 confirmed (2010) Reconfirm
BS 2000-179:1993 Methods of test for petroleum and its products -- Determination of cone penetration of petrolatum
PTI/13 confirmed (2010) Reconfirm
BS 2000-12:1993 Methods of test for petroleum and its products -- Determination of specific energy
PTI/13 confirmed (2010) Reconfirm
BS 5276-2:2003 Pressure vessel details (dimensions) -- Specification for saddle supports for horizontal cylindrical pressure vessels
PVE/1 confirmed (2010) Reconfirm
PD 6439:1969 A review of the methods of calculating stresses due to local loads and local attachments of pressure vessels
PVE/1 confirmed (2010) Reconfirm
PD 6433:1969 Guide to the application of stress analysis to design
PVE/1 confirmed (2010) Reconfirm
BS 799-5:2010 Oil burning equipment -- Carbon steel oil storage tanks. Specification
RHE/13 current Confirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 17 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 8903:2010 Principles and framework for procuring sustainably. Guide
SDS/1/3 current Confirm
BS 8431:2010 Electrical static meters for secondary metering and sub-metering. Specification
SEM/1 current Confirm
BS 4268:1967 Specification for the marking of wooden hatchway covers
SME/32 confirmed (2007) Reconfirm
PD 6461-4:2004 General metrology -- Practical guide to measurement uncertainty
SS/6 confirmed (2010) Reconfirm
BS 350:2004 Conversion factors for units SS/7 confirmed (2010) Reconfirm
BS 3900-0:2010 Methods of test for paints -- Index of test methods
STI/10 current
BS 5252:1976 Framework for colour co-ordination for building purposes
STI/14 confirmed (2010) Reconfirm
BS 5252F:1976 Colour matching fan STI/14 confirmed (2010) Reconfirm
BS 7956:2000 Specification for primers for woodwork STI/28 confirmed (2010) Reconfirm
BS 18477:2010 Inclusive service provision. Requirements for identifying and responding to consumer vulnerability
SVS/0 current
BS 11000-1:2010 Collaborative business relationships -- A framework specification
SVS/1/4 current Confirm
BS 7875:2009 Synthetic saddle trees. Specification SW/136 current Confirm
BS 7188:1998+A2:2009 Impact absorbing playground surfacing. Performance requirements and test methods
SW/65 confirmed (2010)
BS 5335-1:1991+A2:2010
Continental quilts -- Specification for quilts containing fillings other than feather and/or down
TCI/66 current Confirm
BS 5867-1:2004 Textiles and textile products. Curtains and drapes -- General requirements
TCI/66 confirmed (2010) Reconfirm
BS 2543:2004 Upholstery fabrics for end use applications. Classification
TCI/66 confirmed (2010) Reconfirm
BS 7837:1996 Specification for flammability performance for textiles used in the construction of marquees and similar textile structures
TCI/66/-/8 confirmed (2008) Reconfirm
BS 4569:1983 Method of test for ignitability (surface flash) of pile fabrics and assemblies having pile on the surface
TCI/66/-/8 confirmed (2008) Reconfirm
BS 5867-2:2008 Fabrics for curtains, drapes and window blinds -- Flammabililty requirements. Specification
TCI/66/-/8 current Confirm
BS 6806:2002 Textiles. Determination of formaldehyde. Method for the determination of total and free (water extraction method) formaldehyde using chromotropic acid
TCI/80 confirmed (2010) Reconfirm
BS 6701:2010 Telecommunications equipment and telecommunications cabling. Specification for installation, operation and maintenance
TCT/7 current
BS 4484-1:1969 Specification for measuring instruments for constructional works -- Metric graduation and figuring of instruments for linear measurement
TDW/4 confirmed (2010) Reconfirm
BS 8887-220:2010 Design for manufacture, assembly, disassembly and end-of-life processing (MADE) -- The process of remanufacture. Specification
TDW/4 current Confirm
Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 18 of 18 May 2015
BS identifier BS_Title Committee Status Final Review
Outcome
BS 7172:1989 Guide to assessment of position, size and departure from nominal form of geometric features
TDW/4 confirmed (2010) Reconfirm
BS 1347:1986 Specification for architects', engineers' and surveyors' metric scale rules
TDW/4 confirmed (2010) Reconfirm
BS 2459:1974 Specification for set squares (fixed and adjustable) for drawing office use
TDW/4 confirmed (2010) Reconfirm
BS 959:2008 Specification for internal micrometers (including stick micrometers)
TDW/4 current Confirm
BS 1054:1975 Specification for engineers' comparators for external measurement
TDW/4 confirmed (2010) Reconfirm
BS 4358:1968 Glossary of terms used in air gauging with notes on the technique
TDW/4 confirmed (2010) Reconfirm
BS 1134:2010 Assessment of surface texture. Guidance and
general information
TDW/4 current Confirm
BS 2457:1975 Specification for protractors for drawing office use TDW/4 confirmed (2010) Reconfirm
BS 3459:1985 Specification for stands for drawing boards TDW/4 confirmed (2010) Reconfirm
BS 3509:1962 Specification for spirit level vials TDW/4 confirmed (2010)
BS 6381:1983 Specification for drawing boards TDW/4 confirmed (2010) Reconfirm
BS 7272-1:2008 Writing and marking instruments -- Specification for caps to reduce the risk of asphyxiation
TDW/4/-/2 current Confirm
BS 7000-2:2008 Design management systems -- Guide to managing the design of manufactured products
TDW/4/7 current Confirm
BS 2634-2:2010 Roughness comparison specimens -- Specification for spark-eroded, shot-blasted, grit-blasted and polished specimens
TDW/4/9 current Confirm
BS 2634-1:2010 Roughness comparison specimens -- Specification for turned, ground, bored, milled, shaped and planed specimens
TDW/4/9 current Confirm
BS 6072:1981 Method for magnetic particle flaw detection WEE/46 partially replaced by BS EN ISO 9934-1:2001
Reconfirm