+ All Categories
Home > Documents > BS OHSAS 18001:2007 - vsmpo-tirus.co.uk

BS OHSAS 18001:2007 - vsmpo-tirus.co.uk

Date post: 22-Jan-2022
Category:
Upload: others
View: 4 times
Download: 0 times
Share this document with a friend
3
VSMPO TIRUS LIMITED UNIT 12 THE 10 CENTRE NASH ROAD REDDITCH 8987AS Bureau Veritas Certification certify that the Management System of the above organisation has been audited and found to be in accordance with the requirements of the management system standards detailed be/ow Standards BS OHSAS 18001:2007 Scope of certification SALES AND DISTRIBUTION OF METAL AND METAL PRODUCTS TO THE AEROSPACE, DEFENCE AND MANUFACTURING ENGINEERING INDUSTRIES. THE PROVISION OF MATERIAL CUTTING SERVICES. Certification cycle start date: 06 APRIL 2013 , U KAS MANAGEMENT SYSTEMS Subject to the continued satisfactory operation of the organisation's Management System, this certificate expires on: 05 APRIL 2016 Original certification date: 06 APRIL 2010 Certificate No. UK002099 Version 1, Revision date: 21 MARCH 2013 Ken Smith Managing Director 008 Certification body address: Brandon House, 180 Borough High Street, London SE11LB, United Kingdom. Local office: Brandon House, 180 Borough High Street, London SE11LB, United Kingdom. Further clarifications regarding the scope of this certificate and the applicability of the management system requirements may be obtained by consulting the organisation. To check this certificate validity please call: 0207 550 8998 Page 1 of 1
Transcript
Page 1: BS OHSAS 18001:2007 - vsmpo-tirus.co.uk

VSMPO TIRUS LIMITEDUNIT 12

THE 10 CENTRENASH ROADREDDITCH8987AS

Bureau Veritas Certification certify that the Management System of the aboveorganisation has been audited and found to be in accordance with the requirements of the

management system standards detailed be/ow

Standards

BS OHSAS 18001:2007Scope of certification

SALES AND DISTRIBUTION OF METAL AND METAL PRODUCTS TO THEAEROSPACE, DEFENCE AND MANUFACTURING ENGINEERING

INDUSTRIES. THE PROVISION OF MATERIAL CUTTING SERVICES.

Certification cycle start date: 06 APRIL 2013

,U KAS

MANAGEMENTSYSTEMS

Subject to the continued satisfactory operation of theorganisation's Management System, this certificate expires on: 05 APRIL 2016

Original certification date: 06 APRIL 2010

Certificate No. UK002099 Version 1, Revision date: 21 MARCH 2013

Ken SmithManaging Director 008

Certification body address: Brandon House, 180Borough High Street, London SE11LB, United Kingdom.Local office: Brandon House, 180 Borough High Street, London SE11LB, United Kingdom.

Further clarifications regarding the scope of this certificate and the applicability of the managementsystem requirements may be obtained by consulting the organisation.

To check this certificate validity please call: 0207 550 8998

Page 1 of 1

Page 2: BS OHSAS 18001:2007 - vsmpo-tirus.co.uk

I -

VSMPO TIRUS LIMITEDVSMPO TIRUS LIMITEDUNIT 12, THE 10 CENTRENASH ROAD, REDDITCH

WORCESTERSHIRE 898 7AS

Bureau Veritas Certification certify that the Management System of theabove organisation has been audited and found to be in accordance

with the requirements of the management system standards detailed below

Standards

BS EN ISO 14001 :2004Scope of certification

SALES AND DISTRIBUTION OF METAL AND METAL PRODUCTS TOTHE AEROSPACE, DEFENCE AND MANUFACTURING ENGINEERINGINDUSTRIES. THE PROVISION OF MATERIAL CUTTING SERVICES

Certification cycle start date: 26 June 2012

Subject to the continued satisfactory operation of the organisation's ManagementSystem, this certificate expires on: 21 MAY 2015

Original certification date: 26 JUNE 2012

Certificate No. 900050 Issue 01, Revision date: 26 JUNE 2012

~UKAS

MANAGEMENTSYSTEMS

Certification Authority

Certification body address: Brandon House, 180Borough High Street, London SE11LH, United Kingdom 008Local office: Brandon House, 180Borough High Street, London SE11LH, United Kingdom

Further clarifications regarding the scope of this certificate and the applicability of the management systemrequirements may be obtained by consulting the organisation.To check this certificate validity please call: 020 7661 0700

Page 1 of 1

Page 3: BS OHSAS 18001:2007 - vsmpo-tirus.co.uk

Certificate of ApprovalThis is to certify that the Quality Management System of:

VSMPO TIRUS LIMITEDUNIT 12, THE 10 CENTRENASH ROAD, REDDITCH

B987AS

has been audited in accordance with the requirements of EN91 04:2006by

Bureau Veritas Certification and conforms to the followingQuality Management Systems Standards:-

STANDARD ----------

BS EN ISO 9001:2008EN 9120:2009AS 9120 Rev AEN 9100:2009AS 9100 RevC

The Quality Management System is applicable to:SCOPE OF SUPPLY---------

SALES AND DISTRIBUTION OF METAL AND METAL PRODUCTS TO THEAEROSPACE, DEFENCE AND MANUFACTURING ENGINEERING

INDUSTRIES. THE PROVISION OF MATERIALS CUTTING SERVICES.

Original ASCS Approval: 01 APRil, 1998

This certificate is valid only in association with the certificate schedule bearing the same number onwhich the locations applicable to this approval are listed.

This certificate forms part of the approval identified by certificate number: 21573

Original ISO Approval: 01 APRil, 1998

Current Certification: 03 NOVEMBER 2012

Certificate Expiry: 02 NOVEMBER 2015

Date Issued: 02 NOVEMBER 2012

Ken Smith

aerospacesectorcertificationschemeJ......;;;"_';;;;;,.,_j

,UKAS

MANAaMENTSYSTEMS

Managing Director

On behalf of:For Bureau Veritas Certification UK LtdBrandon House180 Borough High StreetLondon SEI ILB

008

Further clarifications regarding the scope of this certificate and the applicability of themanagement system requirements may be obtained by consulting the organisation.

MANAGINGOFFICE: Bureau Veritas Certification Brandon House, 180 Borough High Street, London, SEI ILBISSUINGOFFICE: Bureau Veritas Certification Brandon House, 180 Borough High Street, London, SEI ILB


Recommended