BSC Hardware Description(V900R008C15_01).pdf

8/10/2019 BSC Hardware Description(V900R008C15_01).pdf

1/310

HUAWEI BSC6000 Base Station Controller GSM-R

V900R008C15

BSC Hardware Description

Issue 01

Date 2010-01-30

HUAWEI TECHNOLOGIES CO., LTD.


2/310


3/310

Copyright Huawei Technologies Co., Ltd. 2010. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written

consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the

customer. All or part of the products, services and features described in this document may not be within the

purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees or representations

of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

Issue 01 (2010-01-30) Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

i
http://www.huawei.com/


4/310


5/310

About This Document

Purpose

This document describes the hardware components of the BSC. It provides the users with a

detailed and comprehensive reference tothe Huawei BSC.

Product Version

The following table lists the product version related to this document.

Product Name Product Model Product Version

BSC BSC6000 V900R008C15

Intended Audience

This document is intended for:

l BSC installers

l BSC site maintenance personnel

Organization

1 Changes in BSC Hardware Description

This provides the changes of the BSC Hardware Description.

2 BSC Physical Structure

This describes the physical structure of the BSC, including the cabinet, cables, LMT computers,

and alarm box.

3 BSC Hardware Configuration Modes

The BSC has three hardware configuration modes: BM/TC separated, BM/TC combined, and

A over IP.

4 BSC Cabinet


BSC Hardware Description About This Document



iii


6/310

The BSC uses the Huawei N68E-22 cabinet. The cabinet is designed in compliance with

IEC60297 and IEEE standards.

5 GBCR (Configuration Type A)

This describes the components, cable connections, and engineering specifications of the GBCRthat is configured with the GBAM.

6 GBCR (Configuration Type B)

This describes the components, cable connections, and engineering specifications of the GBCR

that is configured with the GOMU.

7 GBSR Cabinet

The GBSR processes the services of the BSC. A maximum of three GBSRs can be configured,

depending on traffic volume.

8 BSC Subracks

This describes BSC subracks. BSC subracks are used to integrate boards and backplanes into

an independent unit. BSC subracks are functionally classified into the GSM main processing

subrack (GMPS), GSM extended processing subrack (GEPS), and GSM transcoder subrack

(GTCS).

9 BSC Boards

This describes the boards in the BSC.

10 BSC Cables

This describes the cables of the BSC.

11 LEDs on BSC Parts

This describes the LEDs on the powerdistribution box and the panels.

12 DIP Switches on BSC Parts

This describes the DIP switches on the subracks and the boards.

Conventions

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Description

Indicates a hazard with a high level of risk, which if not

avoided,will result in death or serious injury.

Indicates a hazard with a medium or low level of risk, which

if not avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation, which if not

avoided,could result in equipment damage, data loss,

performance degradation, or unexpected results.

Organization



iv Huawei Proprietary and Confidential


Issue 01 (2010-01-30)


7/310

Symbol Description

Indicates a tip that may help you solve a problem or save

time.

Provides additional information to emphasize or supplementimportant points of the main text.

General Conventions

The general conventions that may be found in this document are defined as follows.

Convention Description

Times New Roman Normal paragraphs are in Times New Roman.

Boldface Names of files, directories, folders, and users are in

boldface. For example, log in as user root.

Italic Book titles are in italics.

Courier New Examples of information displayed on the screen are in

Courier New.

Command Conventions

The command conventions that may be found in this document are defined as follows.


Boldface The keywords of a command line are in boldface.

Italic Command arguments are in italics.

[ ] Items (keywords or arguments) in brackets [ ] are optional.

{ x | y | ... } Optional items are grouped in braces and separated by

vertical bars. One item is selected.

[ x | y | ... ] Optional items are grouped in brackets and separated by

vertical bars. One item is selected or no item is selected.

{ x | y | ... }* Optional items are grouped in braces and separated by

vertical bars. A minimum of one item or a maximum of all

items can be selected.

[ x | y | ... ]* Optional items are grouped in brackets and separated by

vertical bars. Several items or no item can be selected.

GUI Conventions

The GUI conventions that may be found in this document are defined as follows.


BSC Hardware Description Organization



v


8/310


Boldface Buttons, menus, parameters, tabs, window, and dialog titles

are in boldface. For example, click OK.

> Multi-level menus are in boldfaceand separated by the ">"signs. For example, choose File> Create> Folder.

Keyboard Operations

The keyboard operations that may be found in this document are defined as follows.

Format Description

Key Press the key. For example, press Enterand press Tab.

Key 1+Key 2 Press the keys concurrently. For example, pressing Ctrl+Alt

+Ameans the three keys should be pressed concurrently.

Key 1, Key 2 Press the keys in turn. For example, pressing Alt, Ameans

the two keys should be pressed in turn.

Mouse Operations

The mouse operations that may be found in this document are defined as follows.

Action Description

Click Select and release the primary mouse button without moving

the pointer.

Double-click Press the primary mouse button twice continuously and

quickly without moving the pointer.

Drag Press and hold the primary mouse button and move the

pointer to a certain position.

Organization



vi Huawei Proprietary and Confidential


Issue 01 (2010-01-30)


9/310

Contents

About This Document...................................................................................................................iii

1 Changes in BSC Hardware Description................................................................................1-1

2 BSC Physical Structure..............................................................................................................2-1

3 BSC Hardware Configuration Modes....................................................................................3-1

4 BSC Cabinet................................................................................................................................4-1

4.1 Appearance of the BSC Cabinet......................................................................................................................4-2

4.2 Classificationof the BSC Cabinet...................................................................................................................4-3

5 GBCR (Configuration Type A)................................................................................................5-1

5.1 Components of the GBCR (Configuration Type A).......................................................................................5-3

5.2 BSC Common Power Distribution Box..........................................................................................................5-6

5.2.1 Front Panel of the BSC Common Power Distribution Box...................................................................5-7

5.2.2 LEDs onthe Front Panel of the BSC Common Power Distribution Box..............................................5-85.2.3 Rear Panel of the BSC Common Power Distribution Box.....................................................................5-8

5.2.4 Technical Specifications of the BSC Common Power Distribution Box...............................................5-9

5.3 Air Defence Subrack.....................................................................................................................................5-10

5.4 KVM..............................................................................................................................................................5-11

5.5 LAN Switch...................................................................................................................................................5-12

5.6 Cabling Frame...............................................................................................................................................5-14

5.7 GBAM...........................................................................................................................................................5-15

5.7.1 Functions of the GBAM.......................................................................................................................5-15

5.7.2 Appearance of the GBAM (IBM X3650T)..........................................................................................5-15

5.7.3 Appearance of the GBAM (C5210).....................................................................................................5-19

5.7.4 Appearance of the GBAM (HP CC3310)............................................................................................5-21

5.8 Rear Cable Trough........................................................................................................................................5-25

5.9 GBCR Cable Connections (Configuration Type A).....................................................................................5-25

5.9.1 Distribution of Power Switches in the GBCR (Configuration Type A)..............................................5-25

5.9.2 Connections of Power Cables and PGND Cables in the GBCR (Configuration Type A)...................5-26

5.9.3 Connections of Signal Cables in the GBCR (Configuration Type A).................................................5-30

5.10 Technical Specifications of the GBCR (Configuration Type A)................................................................5-36

6 GBCR (Configuration Type B)................................................................................................6-1

6.1 Components of the GBCR (Configuration Type B)........................................................................................6-2


BSC Hardware Description Contents



vii


10/310

6.2 BSC High-Power Distribution Box.................................................................................................................6-5

6.2.1 Front Panel of the BSC High-Power Distribution Box..........................................................................6-6

6.2.2 LEDs on the Front Panel of the BSC High-Power Distribution Box.....................................................6-6

6.2.3 Rear Panel of the BSC High-Power Distribution Box...........................................................................6-7

6.2.4 Technical Specifications of the BSC High-Power Distribution Box.....................................................6-8

6.3 Cable Connections of the GBCR (Configuration Type B).............................................................................6-9

6.3.1 Distribution of Power Switches in the GBCR (Configuration Type B).................................................6-9

6.3.2 Connections of Power Cables and PGND Cables in the GBCR (Configuration Type B)...................6-11

6.3.3 Connections of Signal Cables in the GBCR (Configuration Type B)..................................................6-15

6.4 Technical Specifications of the GBCR (Configuration Type B)..................................................................6-19

7 GBSR Cabinet.............................................................................................................................7-1

7.1 Components of the GBSR...............................................................................................................................7-2

7.2 Cable Connections of the GBSR.....................................................................................................................7-5

7.2.1 Distribution of the Power Switches in the GBSR..................................................................................7-6

7.2.2 Connections of Power Cables and PGND Cables in the GBSR............................................................7-7

7.2.3 Connections of Signal Cables in the GBSR.........................................................................................7-12

7.3 Technical Specifications of the GBSR..........................................................................................................7-15

8 BSC Subracks..............................................................................................................................8-1

8.1 Components of the BSC Subrack....................................................................................................................8-2

8.2 BSC Fan Box...................................................................................................................................................8-4

8.2.1 Fan Box(Configuration PFCU).............................................................................................................8-5

8.2.2 Fan Box (Configuration PFCB).............................................................................................................8-7

8.3 BSC Slots........................................................................................................................................................8-9

8.4 DIP Switches on the BSC Subrack...............................................................................................................8-10

8.5 Configurationof the BSC Subrack................................................................................................................8-12

8.5.1 Configuration of the GMPS (Configuration Type A)..........................................................................8-12

8.5.2 Configuration of the GMPS (Configuration Type B)..........................................................................8-16

8.5.3 Configuration of the GEPS..................................................................................................................8-19

8.5.4 Configuration of the GTCS..................................................................................................................8-23

8.6 Technical Specifications of the BSC Subrack...............................................................................................8-24

9 BSC Boards..................................................................................................................................9-19.1 GEIUA............................................................................................................................................................9-6

9.1.1 Functions of the GEIUA........................................................................................................................9-6

9.1.2 GEIUA/GEIUB/GEIUP/GEIUT(EIUa) Panel.......................................................................................9-6

9.1.3 LEDs on the GEIUA/GEIUB/GEIUP/GEIUT(EIUa)Panel...................................................................9-7

9.1.4 Ports on the GEIUA/GEIUB/GEIUP/GEIUT(EIUa) Panel...................................................................9-8

9.1.5 DIP Switches on the GEIUA/GEIUB/GEIUP/GEIUT(EIUa)...............................................................9-9

9.2 GEIUB...........................................................................................................................................................9-11

9.2.1 Functions of the GEIUB.......................................................................................................................9-12

9.2.2 GEIUA/GEIUB/GEIUP/GEIUT(EIUa) Panel.....................................................................................9-12

9.2.3 LEDs on the GEIUA/GEIUB/GEIUP/GEIUT(EIUa)Panel.................................................................9-13

Contents



viii Huawei Proprietary and Confidential


Issue 01 (2010-01-30)


11/310

9.2.4 Ports on the GEIUA/GEIUB/GEIUP/GEIUT(EIUa) Panel.................................................................9-14

9.2.5 DIP Switches on the GEIUA/GEIUB/GEIUP/GEIUT(EIUa).............................................................9-15

9.3 GEIUP...........................................................................................................................................................9-17

9.3.1 Functions of the GEIUP.......................................................................................................................9-18


9.3.3 LEDs onthe GEIUA/GEIUB/GEIUP/GEIUT(EIUa)Panel.................................................................9-19

9.3.4 Ports onthe GEIUA/GEIUB/GEIUP/GEIUT(EIUa) Panel.................................................................9-20


9.4 GEIUT...........................................................................................................................................................9-23

9.4.1 Functions of the GEIUT.......................................................................................................................9-24


9.4.3 LEDs onthe GEIUA/GEIUB/GEIUP/GEIUT(EIUa)Panel.................................................................9-25

9.4.4 Ports onthe GEIUA/GEIUB/GEIUP/GEIUT(EIUa) Panel.................................................................9-26


9.5 GGCU............................................................................................................................................................9-29

9.5.1 Functions of the GGCU........................................................................................................................9-29

9.5.2 GGCU Panel.........................................................................................................................................9-30

9.5.3 LEDs onthe GGCU Panel...................................................................................................................9-30

9.5.4 Ports onthe GGCU Panel.....................................................................................................................9-31

9.6 GOIUA..........................................................................................................................................................9-32

9.6.1 Functions of the GOIUA......................................................................................................................9-32

9.6.2 GOIUA/GOIUB/GOIUP/GOIUT(OIUa) Panel...................................................................................9-32

9.6.3 LEDs onthe GOIUA/GOIUB/GOIUP/GOIUT(OIUa) Panel..............................................................9-339.6.4 Ports onthe GOIUA/GOIUB/GOIUP/GOIUT(OIUa) Panel...............................................................9-34

9.6.5 Technical Specifications of the GOIUA/GOIUB/GOIUP/GOIUT(OIUa)..........................................9-35

9.7 GOIUB..........................................................................................................................................................9-35

9.7.1 Functions of the GOIUB......................................................................................................................9-36


9.7.3 LEDs onthe GOIUA/GOIUB/GOIUP/GOIUT(OIUa) Panel..............................................................9-37

9.7.4 Ports onthe GOIUA/GOIUB/GOIUP/GOIUT(OIUa) Panel...............................................................9-38


9.8 GOIUP...........................................................................................................................................................9-39

9.8.1 Functions of the GOIUP.......................................................................................................................9-40





9.9 GOIUT..........................................................................................................................................................9-43

9.9.1 Functions of the GOIUT......................................................................................................................9-44








ix


12/310


9.10 GOMU.........................................................................................................................................................9-47

9.10.1 Functions of the GOMU.....................................................................................................................9-48

9.10.2 GOMU Panel......................................................................................................................................9-48

9.10.3 LEDs on the GOMU Panel.................................................................................................................9-49

9.10.4 Ports on the GOMU Panel..................................................................................................................9-50

9.11 GSCU..........................................................................................................................................................9-50

9.11.1 Functions of the GSCU......................................................................................................................9-51

9.11.2 GSCU Panel.......................................................................................................................................9-51

9.11.3 LEDs on the GSCU Panel..................................................................................................................9-52

9.11.4 Ports on the GSCU Panel...................................................................................................................9-53

9.12 GTNU..........................................................................................................................................................9-53

9.12.1 Functions of the GTNU......................................................................................................................9-53

9.12.2 GTNUPanel.......................................................................................................................................9-54

9.12.3 LEDs on the GTNU Panel..................................................................................................................9-54

9.12.4 Ports on the GTNU Panel...................................................................................................................9-55

9.13 GXPUM......................................................................................................................................................9-55

9.13.1 Functions of the GXPUM..................................................................................................................9-56

9.13.2 GXPUM/GXPUT/GXPUI(XPUa) Panel...........................................................................................9-56

9.13.3 LEDs on the GXPUM/GXPUT/GXPUI(XPUa) Panel......................................................................9-57

9.13.4 Ports on the GXPUM/GXPUT/GXPUI(XPUa) Panel.......................................................................9-58

9.14 GXPUT........................................................................................................................................................9-58

9.14.1 Functions of the GXPUT....................................................................................................................9-599.14.2 GXPUM/GXPUT/GXPUI(XPUa) Panel...........................................................................................9-59



9.15 GXPUI.........................................................................................................................................................9-61

9.15.1 Functions of the GXPUI.....................................................................................................................9-61

9.15.2 GXPUM/GXPUT/GXPUI(XPUa) Panel...........................................................................................9-61



9.16 GFGUA.......................................................................................................................................................9-63

9.16.1 Functions of the GFGUA...................................................................................................................9-64

9.16.2 GFGUA/GFGUB/GFGUG(FG2a) Panel...........................................................................................9-64

9.16.3 LEDs on the GFGUA/GFGUB/GFGUG(FG2a) Panel......................................................................9-65

9.16.4 Ports on the GFGUA/GFGUB/GFGUG(FG2a) Panel.......................................................................9-66

9.17 GFGUB.......................................................................................................................................................9-67

9.17.1 Functions of the GFGUB...................................................................................................................9-67




9.18 GFGUG.......................................................................................................................................................9-70

Contents



x Huawei Proprietary and Confidential


Issue 01 (2010-01-30)


13/310

9.18.1 Functions of the GFGUG...................................................................................................................9-71




9.19 GOGUA......................................................................................................................................................9-73

9.19.1 Functions of the GOGUA..................................................................................................................9-74

9.19.2 GOGUA/GOGUB(GOUa) Panel.......................................................................................................9-74

9.19.3 LEDs on the GOGUA/GOGUB(GOUa) Panel..................................................................................9-75

9.19.4 Ports on the GOGUA/GOGUB(GOUa) Panel...................................................................................9-76

9.19.5 Technical Specifications of the GOGUA/GOGUB(GOUa)..............................................................9-76

9.20 GOGUB.......................................................................................................................................................9-77

9.20.1 Functions of the GOGUB...................................................................................................................9-77

9.20.2 GOGUA/GOGUB(GOUa) Panel.......................................................................................................9-78

9.20.3 LEDs on the GOGUA/GOGUB(GOUa) Panel..................................................................................9-78

9.20.4 Ports on the GOGUA/GOGUB(GOUa) Panel...................................................................................9-79

9.20.5 Technical Specifications of the GOGUA/GOGUB(GOUa)..............................................................9-79

9.21 GEHUB.......................................................................................................................................................9-80

9.21.1 Functions of the GEHUB...................................................................................................................9-81

9.21.2 GEHUB/GEPUG(PEUa) Panel..........................................................................................................9-81

9.21.3 LEDs on the GEHUB/GEPUG(PEUa) Panel.....................................................................................9-82

9.21.4 Ports on the GEHUB/GEPUG(PEUa) Panel......................................................................................9-82

9.21.5 DIP Switches on the GEHUB/GEPUG(PEUa)..................................................................................9-83

9.22 GEPUG........................................................................................................................................................9-869.22.1 Functions of the GEPUG....................................................................................................................9-86

9.22.2 GEHUB/GEPUG(PEUa) Panel..........................................................................................................9-86

9.22.3 LEDs on the GEHUB/GEPUG(PEUa) Panel.....................................................................................9-87

9.22.4 Ports on the GEHUB/GEPUG(PEUa) Panel......................................................................................9-88

9.22.5 DIP Switches on the GEHUB/GEPUG(PEUa)..................................................................................9-89

9.23 GDPUC.......................................................................................................................................................9-91

9.23.1 Functions of the GDPUC(DPUa).......................................................................................................9-91

9.23.2 GDPUC(DPUa) Panel........................................................................................................................9-91

9.23.3 LEDs on the GDPUC(DPUa) Panel...................................................................................................9-92

9.24 GDPUX.......................................................................................................................................................9-93

9.24.1 Functions of the GDPUX(DPUc).......................................................................................................9-93

9.24.2 GDPUX(DPUc) Panel........................................................................................................................9-94

9.24.3 LEDs on the GDPUX(DPUc) Panel...................................................................................................9-94

9.25 GDPUP........................................................................................................................................................9-95

9.25.1 Functions of the GDPUP(DPUd).......................................................................................................9-95

9.25.2 GDPUP(DPUd) Panel........................................................................................................................9-95

9.25.3 LEDs on the GDPUP(DPUd) Panel...................................................................................................9-96

9.26 MDMC........................................................................................................................................................9-97

9.26.1 Functions of the MDMC....................................................................................................................9-97





xi


14/310

9.26.2 MDMC Panel.....................................................................................................................................9-97

9.26.3 LEDs on the MDMC Panel................................................................................................................9-98

9.26.4 DIP Switch on the MDMC.................................................................................................................9-99

9.27 PAMU.........................................................................................................................................................9-99

9.27.1 Functions of the PAMU...................................................................................................................9-100

9.27.2 PAMU Panel....................................................................................................................................9-100

9.27.3 LEDs on the PAMU Panel...............................................................................................................9-101

9.27.4 DIPSwitch on the PAMU................................................................................................................9-101

9.28 PFCU.........................................................................................................................................................9-102

9.28.1 Functions of the PFCU.....................................................................................................................9-102

9.28.2 DIPSwitch on the PFCU.................................................................................................................9-102

9.29 PFCB.........................................................................................................................................................9-103

9.29.1 Functions of the PFCB.....................................................................................................................9-103

9.29.2 Jumper Pins on the PFCB ................................................................................................................9-1049.30 WOPB.......................................................................................................................................................9-105

9.30.1 Functions of the WOPB...................................................................................................................9-105

10 BSC Cables.............................................................................................................................. 10-1

10.1 Active/Standby 75-Ohm Coaxial Cable......................................................................................................10-4

10.2 Active/Standby 120-Ohm Twisted Pair Cable............................................................................................10-7

10.3 Inter-GTNU Cable.....................................................................................................................................10-11

10.4 LC/PC-LC/PC Single-Mode/Multimode Optical Cable...........................................................................10-12

10.5 LC/PC-FC/PC Single-Mode/Multimode Optical Cable............................................................................10-14

10.6 LC/PC-SC/PC Single-Mode/Multimode Optical Cable............................................................................10-1610.7 Crossover Cable........................................................................................................................................10-18

10.8 Straight-Through Cable.............................................................................................................................10-19

10.9 BITS Clock Signal Cable..........................................................................................................................10-26

10.10 Y-Shaped Clock Cable............................................................................................................................10-28

10.11 Signal cable of the alarm box..................................................................................................................10-30

10.12 PDB monitoring signal cable..................................................................................................................10-32

10.13 EMU RS485 communication cable.........................................................................................................10-34

10.14 GOMU serial port cable..........................................................................................................................10-36

10.15 BSC Power Cable....................................................................................................................................10-36

10.16 BSC PGND cable....................................................................................................................................10-39

11 LEDs on BSC Parts.................................................................................................................11-1

11.1 LEDs on theFront Panel of the BSC Common Power Distribution Box...................................................11-3

11.2 LEDs onthe Front Panel of the BSC High-Power Distribution Box..........................................................11-3

11.3 LEDs on theGDPUC(DPUa) Panel............................................................................................................11-4

11.4 LEDs on theGDPUP(DPUd) Panel............................................................................................................11-5

11.5 LEDs onthe GDPUX(DPUc) Panel............................................................................................................11-5

11.6 LEDs on theGEHUB/GEPUG(PEUa) Panel..............................................................................................11-6

11.7 LEDs on theGEIUA/GEIUB/GEIUP/GEIUT(EIUa)Panel........................................................................11-6

11.8 LEDs on theGFGUA/GFGUB/GFGUG(FG2a) Panel...............................................................................11-7

Contents



xii Huawei Proprietary and Confidential


Issue 01 (2010-01-30)


15/310

11.9 LEDs on the GGCU Panel..........................................................................................................................11-8

11.10 LEDs on the GOGUA/GOGUB(GOUa) Panel.........................................................................................11-9

11.11 LEDs on the GOIUA/GOIUB/GOIUP/GOIUT(OIUa) Panel...................................................................11-9

11.12 LEDs on the GOMU Panel......................................................................................................................11-10

11.13 LEDs on the GSCU Panel.......................................................................................................................11-11

11.14 LEDs on the GTNU Panel.......................................................................................................................11-12

11.15 LEDs on the GXPUM/GXPUT/GXPUI(XPUa) Panel...........................................................................11-13

11.16 LEDs on the MDMC Panel.....................................................................................................................11-13

11.17 LEDs on the PAMU Panel......................................................................................................................11-14

12 DIP Switches on BSC Parts..................................................................................................12-1

12.1 DIP Switches on the BSC Subrack.............................................................................................................12-2

12.2 DIP Switches on the GEHUB/GEPUG(PEUa)...........................................................................................12-3

12.3 DIP Switches on the GEIUA/GEIUB/GEIUP/GEIUT(EIUa)....................................................................12-6

12.4 DIP Switch on the MDMC..........................................................................................................................12-8

12.5 DIP Switch on the PAMU...........................................................................................................................12-9

12.6 DIP Switch on the PFCU..........................................................................................................................12-10





xiii


16/310


17/310

Figures

Figure 2-1Physical structure of the BSC.............................................................................................................2-1

Figure 4-1Single-door BSC cabinet....................................................................................................................4-2

Figure 4-2Double-door BSC cabinet...................................................................................................................4-3

Figure 5-1Outer components of the GBCR.........................................................................................................5-4

Figure 5-2Inner components of the GBCR.........................................................................................................5-5

Figure 5-3Front panel of the BSC common power distribution box...................................................................5-7

Figure 5-4Rear panel of the BSC common power distribution box....................................................................5-9

Figure 5-5Air defence subrack..........................................................................................................................5-10

Figure 5-6KVM.................................................................................................................................................5-11

Figure 5-7Front panel of the KVM...................................................................................................................5-11

Figure 5-8Rear panel of the KVM....................................................................................................................5-12

Figure 5-9LAN switch.......................................................................................................................................5-12

Figure 5-10Front panel of the LAN switch.......................................................................................................5-13

Figure 5-11Rear panel of the LAN switch........................................................................................................5-14Figure 5-12Cabling frame.................................................................................................................................5-15

Figure 5-13GBAM............................................................................................................................................5-16

Figure 5-14Front panel of the GBAM...............................................................................................................5-16

Figure 5-15Rear panel of the GBAM................................................................................................................5-18

Figure 5-16GBAM............................................................................................................................................5-19



Figure 5-19GBAM............................................................................................................................................5-22



Figure 5-22Rear cable trough.............................................................................. ..............................................5-25

Figure 5-23Distribution of the power switches in the GBCR...........................................................................5-26

Figure 5-24Distribution of power cables and PGND cables in the GBCR (IBM X3650T)..............................5-27

Figure 5-25Connections of power cables and PGND cables in the GBCR (C5210/HP CC3310)...................5-29

Figure 5-26Connections of signal cables in the GBCR (IBM X3650T)...........................................................5-31

Figure 5-27Connections of signal cables in the GBCR (C5210/HP CC3310)..................................................5-32

Figure 6-1Outer components of the GBCR.........................................................................................................6-3

Figure 6-2Inner components of the GBCR.........................................................................................................6-4

Figure 6-3Front panel of the BSC high-power distribution box.........................................................................6-6


BSC Hardware Description Figures



xv


18/310

Figure 6-4Rear panel of the BSC high-power distribution box..........................................................................6-7

Figure 6-5Distribution of the power switches in the GBCR (1)....................................................................... 6-10

Figure 6-6Distribution of the power switches in the GBCR (2)....................................................................... 6-11

Figure 6-7Connections of power cables and PGND cables in the GBCR (1)...................................................6-12

Figure 6-8Connections of power cables and PGND cables in the GBCR (2)...................................................6-14

Figure 6-9Connections of the signal cables in the GBCR.................................................................................6-16

Figure 7-1Outer components of the GBSR.........................................................................................................7-3

Figure 7-2Inner components of the GBSR..........................................................................................................7-4

Figure 7-3Distribution of the power switches in the GBSR (1)..........................................................................7-6

Figure 7-4Distribution of the power switches in the GBSR (2)..........................................................................7-7

Figure 7-5Connections of power cables and PGND cables in the GBSR (1).....................................................7-9

Figure 7-6Connections of power cables and PGND cables in the GBSR (2)...................................................7-11

Figure 7-7Connections of the signal cables in the GBSR.................................................................................7-13

Figure 8-1Structure of the BSC subrack.............................................................................................................8-3

Figure 8-2Fan box (Configuration PFCU)..........................................................................................................8-5

Figure 8-3Fan box (Configuration PFCB)..........................................................................................................8-7

Figure 8-4Slot assignment in the BSC subrack.................................................................................................8-10

Figure 8-5DIP switch on the BSC subrack....................................................................................................... 8-10

Figure 8-6Fully configured GMPS (1)..............................................................................................................8-13




Figure 8-10Fully configured GMPS (5)............................................................................................................8-15Figure 8-11Fully configured GMPS (6)............................................................................................................8-15

Figure 8-12Fully configured GMPS (1)............................................................................................................8-16






Figure 8-18Fully configured GEPS (1).............................................................................................................8-20






Figure 8-24Fully configured GTCS (1).............................................................................................................8-23

Figure 8-25Fully configured GTCS (2).............................................................................................................8-24

Figure 9-1GEIUA/GEIUB/GEIUP/GEIUT panel...............................................................................................9-7

Figure 9-2Layout of the DIP switches on the GEIUA/GEIUB/GEIUP/GEIUT.................................................9-9

Figure 9-3GEIUA/GEIUB/GEIUP/GEIUT panel.............................................................................................9-13

Figure 9-4Layout of the DIP switches on the GEIUA/GEIUB/GEIUP/GEIUT...............................................9-15

Figures



xvi Huawei Proprietary and Confidential


Issue 01 (2010-01-30)


19/310





Figure 9-9GGCU panel.....................................................................................................................................9-30

Figure 9-10GOIUA/GOIUB/GOIUP/GOIUT panel.........................................................................................9-33




Figure 9-14GOMU panel..................................................................................................................................9-48

Figure 9-15GSCU panel....................................................................................................................................9-51

Figure 9-16GTNU panel...................................................................................................................................9-54

Figure 9-17GXPUM/GXPUT/GXPUI panel....................................................................................................9-57



Figure 9-20GFGUA/GFGUB/GFGUG panel...................................................................................................9-65



Figure 9-23GOGUA/GOGUB panel.................................................................................................................9-75

Figure 9-24GOGUA/GOGUB panel.................................................................................................................9-78

Figure 9-25GEHUB/GEPUG panel..................................................................................................................9-81

Figure 9-26DIP switches on the GEHUB/GEPUG...........................................................................................9-84

Figure 9-27GEHUB/GEPUG panel..................................................................................................................9-87Figure 9-28DIP switches on the GEHUB/GEPUG...........................................................................................9-89

Figure 9-29GDPUC panel.................................................................................................................................9-92

Figure 9-30GDPUX panel.................................................................................................................................9-94

Figure 9-31GDPUP panel.................................................................................................................................9-96

Figure 9-32MDMC panel..................................................................................................................................9-98

Figure 9-33DIP switch on the MDMC..............................................................................................................9-99

Figure 9-34PAMU panel.................................................................................................................................9-100

Figure 9-35DIP switch on the PAMU.............................................................................................................9-101

Figure 9-36DIP switch on the PFCU..............................................................................................................9-103

Figure 9-37Jumper pins on the PFCB.............................................................................................................9-104

Figure 10-1Active/standby 75-ohm coaxial cable.............................................................................................10-4

Figure 10-2Installation position of the active/standby 75-ohm coaxial cable...................................................10-7

Figure 10-3Active/standby 120-ohm twisted pair cable...................................................................................10-8

Figure 10-4Installation position of the active/standby 120-ohm twisted pair cable.......................................10-11

Figure 10-5Inter-GTNU cable.........................................................................................................................10-11

Figure 10-6Installation position of the inter-GTNU cable..............................................................................10-12

Figure 10-7LC/PC-LC/PC single-mode/multimode optical cable..................................................................10-13

Figure 10-8Installation position of the LC/PC-LC/PC single-mode/multimode optical cable.......................10-14

Figure 10-9LC/PC-FC/PC single-mode/multimode optical cable..................................................................10-15


BSC Hardware Description Figures



xvii


20/310

Figure 10-10Installation position of the LC/PC-FC/PC single-mode/multimode optical cable.....................10-16

Figure 10-11LC/PC-SC/PC single-mode/multimode optical cable................................................................10-17

Figure 10-12Installation position of the LC/PC-SC/PC single-mode/multimode optical cable.....................10-18

Figure 10-13Crossover cable...........................................................................................................................10-19

Figure 10-14Straight-through cable................................................................................................................10-20

Figure 10-15Connections between the GSCUs and the GBAM.....................................................................10-21

Figure 10-16Connection between the GBAM and the LAN switch...............................................................10-22

Figure 10-17Connection between the LAN switch and the M2000 (LAN)....................................................10-22

Figure 10-18Connection between the LAN switch and the BSC LMT computer..........................................10-23

Figure 10-19Connection between the LAN switch and the CBC...................................................................10-23

Figure 10-20Installation position of the Straight-through cable between the GSCUs....................................10-24

Figure 10-21Connection between the GOMU and the LAN of the customer.................................................10-25

Figure 10-22Connection between the GXPUM and the CBC........................................................................10-26

Figure 10-2375-ohm coaxial clock cable........................................................................................................10-27

Figure 10-24120-ohm clock conversion cable................................................................................................10-27

Figure 10-25Installation position of the BITS clock signal cable...................................................................10-28

Figure 10-26Y-shaped clock cable..................................................................................................................10-29

Figure 10-27Installation position of the Y-shaped clock cable.......................................................................10-30

Figure 10-28Alarm box signal cable...............................................................................................................10-31

Figure 10-29Installation position of the signal cable of the alarm box...........................................................10-31

Figure 10-30PDB monitoring signal cable......................................................................................................10-32

Figure 10-31Installation positions of the PDB monitoring signal cable.........................................................10-33

Figure 10-32RS485 communication cable......................................................................................................10-34Figure 10-33Connecting the cable between the EMU and the power distribution box of the cabinet............10-35

Figure 10-34GOMU serial port cable.............................................................................................................10-36

Figure 10-35BSC external/internal power cable.............................................................................................10-38

Figure 10-36BSC external/internal power cable.............................................................................................10-39

Figure 10-37BSC PGND cable.......................................................................................................................10-41

Figure 12-1DIP switch on the BSC subrack.....................................................................................................12-2

Figure 12-2DIP switches on the GEHUB/GEPUG...........................................................................................12-4

Figure 12-3Layout of the DIP switches on the GEIUA/GEIUB/GEIUP/GEIUT.............................................12-6

Figure 12-4DIP switch on the MDMC..............................................................................................................12-8

Figure 12-5DIP switch on the PAMU...............................................................................................................12-9

Figure 12-6DIP switch on the PFCU..............................................................................................................12-10

Figures



xviii Huawei Proprietary and Confidential


Issue 01 (2010-01-30)


21/310

Tables

Table 2-1Components of the BSC.......................................................................................................................2-2

Table 3-1BSC hardware configuration modes....................................................................................................3-1

Table 5-1Inner components of the GBCR...........................................................................................................5-6

Table 5-2LEDs on the front panel of the BSC common power distribution box................................................5-8

Table 5-3Technical specifications of the BSC power distribution box...............................................................5-9

Table 5-4LEDs on the front panel of the LAN switch......................................................................................5-13

Table 5-5Silkscreens on the front panel of the GBAM.....................................................................................5-16

Table 5-6Silkscreens on the rear panel of the GBAM.......................................................................................5-18


Table 5-8Silkscreens on the rear panel of the GBAM.......................................................................................5-21


Table 5-10Silkscreens on the rear panel of the GBAM.....................................................................................5-24

Table 5-11Distribution of the power switches in the GBCR.............................................................................5-26

Table 5-12Power cables and PGND cables in the GBCR.................................................................................5-28Table 5-13Power cables and PGND cables in the GBCR.................................................................................5-30

Table 5-14Signal cables in the GBCR...............................................................................................................5-33

Table 5-15Structural specifications of the GBCR.............................................................................................5-36

Table 5-16Electrical specifications of the GBCR............................................................................................. 5-37

Table 6-1Inner Components of the GBCR..........................................................................................................6-5

Table 6-2LEDs on the front panel of the BSC high-power distribution box......................................................6-7

Table 6-3Technical specifications of the BSC high-power distribution box......................................................6-8

Table 6-4Mapping between the power switches and the components (1).........................................................6-10

Table 6-5Mapping between the power switches and the components (2).........................................................6-11

Table 6-6Power cables and PGND cables in the GBCR (1)............................................................................. 6-13

Table 6-7Power cables and PGND cables in the GBCR (2)............................................................................. 6-14

Table 6-8Signal cables in the GBCR.................................................................................................................6-17

Table 6-9Structural specifications of the GBCR...............................................................................................6-20

Table 6-10Electrical specifications of the GBCR............................................................................................. 6-20

Table 7-1Inner components of the GBSR...........................................................................................................7-5

Table 7-2Mapping between the power switches and the components (1)...........................................................7-6

Table 7-3Mapping between the power switches and the components (2)...........................................................7-7

Table 7-4Power cables and PGND cables in the GBSR (1)..............................................................................7-10

Table 7-5Power cables and PGND cables in the GBSR (2)..............................................................................7-12


BSC Hardware Description Tables



xix


22/310

Table 7-6Signal cables in the GBSR.................................................................................................................7-14

Table 7-7Structural specifications of the GBSR...............................................................................................7-15

Table 7-8Electrical specifications of the GBSR................................................................................................7-16

Table 8-1Components of the BSC subrack.........................................................................................................8-4

Table 8-2LED on the fan box (Configuration PFCU).........................................................................................8-5

Table 8-3Technical specifications of the fan box (Configuration PFCU)...........................................................8-6

Table 8-4LED on the fan box (Configuration PFCB).........................................................................................8-8

Table 8-5Technical specifications of the fan box (Configuration PFCB)...........................................................8-9

Table 8-6Definitions of the DIP bits.................................................................................................................8-11

Table 8-7Setting of the DIP switches................................................................................................................8-12

Table 8-8Technical specifications of the GMPS...............................................................................................8-24

Table 8-9Technical specifications of the GEPS................................................................................................8-25

Table 8-10Technical specifications of the GTCS.............................. ................................................................8-25

Table 9-1Boards in the BSC................................................................................................................................9-1

Table 9-2LEDs on the board...............................................................................................................................9-7

Table 9-3Ports on the GEIUA/GEIUB/GEIUP/GEIUT panel............................................................................9-8

Table 9-4DIP switches on the GEIUA/GEIUB/GEIUP/GEIUT.......................................................................9-10

Table 9-5Switch types related to the DIP bits...................................................................................................9-11

Table 9-6LEDs on the board.............................................................................................................................9-13

Table 9-7Ports on the GEIUA/GEIUB/GEIUP/GEIUT panel..........................................................................9-14

Table 9-8DIP switches on the GEIUA/GEIUB/GEIUP/GEIUT.......................................................................9-16

Table 9-9Switch types related to the DIP bits...................................................................................................9-17

Table 9-10LEDs on the board...........................................................................................................................9-19Table 9-11Ports on the GEIUA/GEIUB/GEIUP/GEIUT panel........................................................................9-20

Table 9-12DIP switches on the GEIUA/GEIUB/GEIUP/GEIUT.....................................................................9-22

Table 9-13Switch types related to the DIP bits.................................................................................................9-23

Table 9-14LEDs on the board...........................................................................................................................9-25

Table 9-15Ports on the GEIUA/GEIUB/GEIUP/GEIUT panel........................................................................9-26

Table 9-16DIP switches on the GEIUA/GEIUB/GEIUP/GEIUT.....................................................................9-28

Table 9-17Switch types related to the DIP bits.................................................................................................9-29


Table 9-19Ports on the GGCU panel.................................................................................................................9-31


Table 9-21Ports on the GOIUA/GOIUB/GOIUP/GOIUT panel......................................................................9-34

Table 9-22Technical Specifications of the GOIUA/GOIUB/GOIUP/GOIUT................................ ..................9-35








Tables



xx Huawei Proprietary and Confidential


Issue 01 (2010-01-30)


23/310


Table 9-31Technical Specifications of the GOIUA/GOIUB/GOIUP/GOIUT..................................................9-47

Table 9-32LEDs on the board........................................................................................................................... 9-49

Table 9-33Ports on the GOMU panel................................................................................................................9-50


Table 9-35LEDs of the Ethernet ports...............................................................................................................9-52

Table 9-36Ports on the GSCU panel................................................................................................................. 9-53


Table 9-38Ports on the GTNU panel.................................................................................................................9-55


Table 9-40Ports on the GXPUM/GXPUT/GXPUI panel..................................................................................9-58







Table 9-47Ports on the GFGUA/GFGUB/GFGUG panel.................................................................................9-66



Table 9-50Ports on the GFGUA/GFGUB/GFGUG panel.................................................................................9-70


Table 9-52LEDs of the Ethernet ports...............................................................................................................9-72Table 9-53Ports on the GFGUA/GFGUB/GFGUG panel.................................................................................9-73


Table 9-55Ports on the GOGUA/GOGUB panel..............................................................................................9-76

Table 9-56Technical Specifications of the GOGUA/GOGUB......................................................................... 9-76


Table 9-58Ports on the GOGUA/GOGUB panel..............................................................................................9-79

Table 9-59Technical Specifications of the GOGUA/GOGUB......................................................................... 9-80


Table 9-61Ports on the GEHUB/GEPUG panel................................................................................................9-82

Table 9-62DIP switches on GEHUB/GEPUG (75-ohm coaxial cable)............................................................9-84

Table 9-63DIP switches on GEHUB/GEPUG (120-ohm twisted pair cable)...................................................9-85


Date post:	02-Jun-2018
Category:	Documents
Upload:	faran-ul-ghani
View:	220 times
Download:	0 times

BSC Hardware Description(V900R008C15_01).pdf

Documents