High bonding tape
Budget line adhesives
trax professional
Trax has developed a new superior adhesive tape for general tyre shop use offering a high level of bonding for all alloy wheels and “all weather” fitment. The TRAX “PROFESSIONAL” range has been introduced due to demand for higher levels of adhesion ensuring that weights do not fall off. Tape made in Germany by Lohmann. OE approved. See over & web site for more details.
• The best budget line on the market – super sticky white tape with quality appearance. 150 oz box.
• 12 x ¼oz ¾” wide 1/8” high 50 strips/box
• 500E Silver / 500C grey coated / 500B black coated
• 1 pallet = 245 boxes Weight 2300 lbs (1050Kg)
• A budget line 60g strip. Hard foam tape - easier to remove from the rim. 6Kg - 185oz box.
• 12 x 5g. 19mm wide (¾”) 3.8mm high.
• 100 strips/box
• 602E silver / 602C grey coated / 602B black coated
• The most reliable high performance adhesive weight for general tire shop & garage use.
• 12 x ¼oz ¾” wide 5/32” high 50 strips/box
• 513E silver / 513C grey coated / 513B black coated
• 3 boxes/carton 84 cartons/pallet 252 boxes/pallet
• Pallet weight 2400 lbs (1100Kg)
1 pallet = 160 boxes. Weight 960Kg (2100 lbs)
High Performance Adhesive Weights
500 Series – slimline ¼ oz - 50 x 3oz strips
513 TRAX PRO – slimline car ¼ oz - 50 x 3oz strips (150 oz box)
602 Series – slimline 5g - 100 x 60g strips
SUB ZEROALL WEATHER TAPEsticks on cold wheels -10°C / 14°F
adhesive weights
Normal adhesive weight do not stick well at low temperatures. Trax PROFESSIONAL tape can be fitted on cold wheels at 14°F (-10°C)
Weights not sticking?
Also rolls. Please enquire.
Use the PROFESSIONAL range
TRAX PROFESSIONAL
www.traxjh-USA.com
Adhesive weights may not stick to new or refurbished alloy rims – why?
On new or refurbished rims the surface energy (see technical note below) of the paint or lacquer may be too low to readily allow the adhesive tape to chemically bond. The rim looks clean but in fact has a slippery surface not allowing the tape to stick – or it may have been wiped with a silicone polish.
The Trax PROFESSIONAL adhesive weight is designed to work at lower surface energy levels encouraging a better sticking solution to new or refurbished alloy rims. OE approved - for more information see the Trax website.
Technical Note: Surface energy is measured in dynes. The higher the dynes the better the stick will be. We recommend a minimum of 36 dynes as a surface energy level for alloy rim surfaces - although this is also dependent on ensuring the weight is properly fi tted and the rim clean. The ready bonding ability will also depend on temperature. We are aware of alloy rim surfaces down to 28 dynes - for example a rubber tire will be around 30 dynes and you would not expect to stick adhesive weights to a tire! You can buy pens that give an indication of surface energy on the internet.
On new or refurbished rims the surface energy (see technical note below) of the paint or lacquer may be too low
own label boxes availableCustomers can have their own label or boxes on both the budget line and Professional range.Please enquire.
519 TRAX PRO – Light Truck & SUV ½ oz - 30 x 4 oz strips (120 oz box)
513
519
• The Trax Professional weight for light truck and SUV’s. A reliable high performance weight. Lohmann OE tape.
• 8 x ½oz ¾” wide 3/16” high. 30 strips/box.
• 519E silver / 519C grey coated / 519B black coated
• 3 boxes/carton 100 cartons/pallet. 300 boxes/pallet.
• Pallet weight 2250lbs (1025Kg)
Easy hand holds (28lbs)
PER PALLET Boxes
252
300
Cartons
84
100
Weight lbs
2400
2250
3 boxes/carton
Trax JH Ltd, Mochdre Enterprise Park, Newtown, Powys. UK SY16 4LE ©Trax JH Nov 2014