BUILDING
62 63
g A mm
Shovel 5501 MM REF. £ B mm C mm
g A mm
Shovel 5502 MM REF. £ B mm C mm
g A mm
Shovel 5501 MA REF. £ B mm C mm
g A mm
Shovel 5502 MA REF. £ B mm C mm
g A mm
Shovel 5501 ML REF. £ B mm C mm
g A mm
Shovel 5502 ML REF. £ B mm C mm
A
B
C
g A mm
Shovel 5550 SM REF. £ B mm C mm g A mm
Shovel 5551 SM REF. £ B mm C mm
g A mm
Shovel 5556 SM REF. £ B mm C mmg A mm
Shovel 5552 SM REF. £ B mm C mm
g A mm
Shovel 5557 SM REF. £ B mm C mm
RES
ISTA
NT
g A mm
Wrecking bar 5982 REF. £ g A mm
Bending wrench 5985 REF. £
A
ShovelsAdvantages:• Long life, high wear resistance.• Great elasticity, bending resistance.• Perfect joint between blade and handle.• Light, pleasant touch wooden handles available in T-shaped, D and long sizes.Features:• Highest quality heat-treated blade.• Very strong, riveted holder ensuring the perfect joint between shovel and handle.• Epoxy paint finishing.Uses:• For digging and collecting rubble, cement, soil, etc.
MM: T handle.MA: D handle.ML: Long handle.SM: Without handle.
T handle pointed shovel, Ref.: M 5501 M.
T handle square shovel, Ref.: M 5501 M.
D handle pointed shovel, Ref.: M 5501 A.
D handle square shovel, Ref.: M 5501 A.
Long handle pointed shovel, Ref.: M 5501 L.
Long handle square shovel, Ref.: M 5501 L.
Pointed shovel without handle. Italian pointed shovel without handle.
Rounded shovel without handle.Pointed shovel without handle.
Pointed shovel without handle.
BU
ILD
ING
FORMWORK
Wrecking bar and bending wrench
Advantages:• Maximum hardness, high wear resistant. Claw design for minimum effort.Features:• Forged, heat toughened heads and claws.• Highest quality steel. Epoxy paint finish.
For levering and removing the form support. For bending ironworking during the shuttering process.
FORMWORK
5501-2 ML 1.970 1.49017,13 325 265500301 6
5501-2 MA5501-3 MA5501-4 MA5501-3 MAR
1.9752.0852.1951.905
1.0301.0401.0451.040
16,18 15,40
17,86 16,61
325335345335
265290300290
500202500509500707503555
6666
5501-2 MM5501-3 MM5501-4 MM
1.8001.9152.020
1.0201.0301.035
13,50 13,59 15,14
325335345
265290300
500103500400500608
666
5502-2 ML 2.110 1.49017,13 320 250501254 6
5502-2 MM5502-3 MM5502-4 MM5502-6 MM
1.9302.0602.1702.735
1.0151.0301.0301.070
13,85 13,93
15,14 16,35
320335340370
250265275305
501100501308501506501704
6666
5502-2 MA5502-3 MA5502-4 MA5502-6 MA
2.1002.2352.3452.565
1.0201.0301.0351.070
16,44 16,00 17,86 19,15
320335340370
250265275305
501209501407501605501803
6666
5556-2 SM 9107,19 270 255779790 25
5557-23 SM 9906,95 300 220598926 25
5552-26 SM 8507,31 270 260501544 25
5550-27 SM5550-29 SM5550-31 SM
1.0501.1701.660
7,90
8,32
8,66
270290310
270290310
606829537536526547
141212
5551 SM 860 6,87 290 295501810 20
5982-18x5005982-20x6005982-20x7005982-22x8005982-22x10005982-22x1200
1.2001.8002.0252.8503.4004.000
500600700800
1.0001.200
11,26 13,27 14,45 17,75 21,30 23,14
157000156997156980156973156966433098
666664
5985-85985-105985-125985-145985-165985-185985-205985-22
400680825
1.3001.8502.4003.4004.300
380460500600700850
1.0001.100
10,34 11,40 13,02 15,73 19,76 23,58 29,66 38,50
157901157079157062157055157048157031157024157017
66666664
64 65
REF. g A mm£ B mm M REF. g A mm£ B mm M
REF. REF. g A mm£ B mm M
REF. g A mm£ B mm M REF. g A mm£ B mm M
A
B
g A mm
Concreter’s nippers 6001 REF. £ B mm g A mm
Carpenter’s nippers 6005 REF. £ B mm
A
B
B
A
REF. g A mm£ B mm REF. g A mm£ B mm
Handle screw T 6009 M REF. £ g
Head screw T 6009 C REF. £ g
AB
REF. g A mm£ B mm M REF. g A mm£ B mm M
g A mm
Cartridge belt 51308 REF. £ B mm
Pick, scrapers and rakes Advantages:• Long life, long wear resistance.• Maximum bending resistance.Features:• Single piece forged steel.• Maximum quality steel, heat treated.Uses:• For opening trenches and digging stones.• For moving and spreading cement, concrete, sand,stones, etc.
Scraper 5701
Curved shoulder scraper.Supplied without handle.
Scraper 5702
Curved shoulder scraper.Supplied without handle.
Scraper 5709
Square shoulder scraper.Supplied without handle.
Rake 5751
5 flat pronged rake.Supplied without handle.
Rake 5753
5 prong rake.Supplied without handle.
Rake 5754
6 prong rake.Supplied without handle.
Nippers
Advantages:• Long life and maximum hardness, high wear resistance. High cutting capacity.Features:• Highest quality steel. Deep heat treatment on the edges.• Flat head and perfect edge alignment.
BU
ILD
ING
• High cutting capacity.• Safety stops.• Epoxy paint finishing.• Head and screw replacement parts.• Anti-slip elastomer handles.• Induction tempered edges.
Bolt cutters
Wire cutter 6009 Head C 6009
FORMWORK FORMWORK
FORMWORK
Spanish pick. Supplied without handle.
Pick 5001 Pick 5016
Leather cartridge belt or tool holder for shuttering work.Four pockets and hammer carrier.Long life and maximum resistance. Manufactured in leather.
CARTRIDGE
5701-05701-B
1.1001.400
160170
19,97
23,12
260300
M 5701M 5701
126402126600
66
5702-A 1.275 16014,97 260 M 4126907 6
5709£ g A mm B mm M
26,23 127003 6 1.200 140 310 M 5701 5751 1.600 16020,49 235 M 4127102 6
5753-B 1.350 15518,38 195 M 4127409 6 5754 1.500 15021,27 220 M 4127508 6
5001-A5001-B5001-C5001-D
2.0502.5003.0003.500
450480520570
17,00 17,08 19,15 22,17
45525558
120004120103120202120301
6666
M 6M 6M 7M 7
5016-005016-00 CM
1.5002.430
450450
17,13 24,50
5050
M 5016-00M 5016-00
182651225167
610
51308 680 25025,15 200162271 2
6001-2256001-2506001-2806001-300
330400430510
225250280300
10,53 11,35 13,16 13,76
3036
36,536,5
157604157611157628949711
6666
6005-1806005-2006005-2256005-250
290390410530
180200225250
10,70 11,22 12,77 15,40
48535358
157635157642157659157666
6666
T 6009-450 MT 6009-600 MT 6009-750 MT 6009-900 MT 6009-1050 M
3,88 3,88 3,88 3,88 3,88
2020202025
179569179576179606179620179637
11111
T 6009-450 CT 6009-600 CT 6009-750 CT 6009-900 CT 6009-1050 C
3,88 3,88 3,88 3,88 3,88
2020202025
179477179484179514179521179538
11111
6009-4506009-6006009-7506009-9006009-1050
1.5402.5903.8806.1108.900
472627779929
1.070
72,56 82,53
107,46
136,67
177,74
708597
110125
159011159028159035159042159059
11111
C 6009-450C 6009-600C 6009-750C 6009-900C 6009-1050
6701.0001.5002.0003.000
708597
110125
41,16
56,30
66,74
79,46
109,62
128148168188209
158960158977158984158991159004
33111
66 67
REF. g A mm£ B mm REF. g A mm£ B mm
REF. g A mm£ B mmREF. g A mm£ B mm
REF. g A mm£ B mm REF. g A mm£ B mm
A
B
REF. g A mm£ B mmREF. g A mm£ B mm
Trowel 5848 BIM REF. g A mm£ B mmREF. g A mm£ B mm
REF. g A mm£ B mmREF. g A mm£ B mm
Trowel 5850 BIM REF. V
REF. £ g A mm B mmg A mm
Trowel 5850 REF.
REF. £ B mm
REF. g A mm£ B mm REF. g A mm£ B mm
Trowels and pointing trowels
Advantages:• Long life unbreackable.• Excellent flexibility.• Each model matches every market and use requirements.• Perfect handle and socket assembly.• Available in wooden and bimaterial handles.Features:• Single piece forged trowels.• Highest quality selected steel.• Special laminated blade in one direction.• Differentiated heat treatment on the blade and socket.• Joint between handle and socket made from dual component epoxy resin with a tensile strength over 0.6 tonnes.Uses:• For preparing cement and mortar. For applying this mixture.
Catalan trowel with beech handle.
Trowel 5841
Catalan trowel with bimaterial handle.
Trowel 5841 BIM
Madrid trowel with bimaterial handle.
Trowel 5842 BIM
Madrid trowel with beech handle.
Trowel 5842
Andalusian trowel with beech handle.
Trowel 5843
Andalusian trowel with bimaterial handle.
Trowel 5843 BIM
North trowel with bimaterial handle.
Trowel 5844 BIM
North trowel with beech handle.
Trowel 5844
Rounded point trowel for special tiling work.Bimaterial handle.
Trowel 5848
Rounded point trowel for special tiling work.Beech handle special width for striking tiles.
Trowel 5849 BIM
Square point trowel for special tiling work.Bimaterial handle.
Trowel 5849
Square point trowel for special tiling work.Beech handle special width for striking tiles.
Extremadura Portugal trowel with bimateriall handle.Extremadura Portugal trowel with beech handle.
Portuguese trowel with beech handle.
Trowel 5851
Portuguese trowel with bimaterial handle.
Trowel 5851 BIM
BU
ILD
ING
MASONRY
5841-A5841-B5841-C
405455505
150165180
14,80 14,75 14,97
115120125
131208131307131406
666
5842-H BIM5842-J BIM5842-K BIM5842-L BIM
295325345365
190215227240
14,71
15,74 16,11 16,31
104116122128
127881127973128048128116
6666
5841-A BIM5841-B BIM5841-C BIM
425475525
150165180
15,74 15,66 16,02
115120125
127683127751127829
666
5842-B5842-D5842-F5842-H5842-J5842-K5842-L
155190225275305325345
115140165190215227240
11,91 12,90
12,81 13,68 14,80 15,44 15,62
688092
104116122128
131604131802132007132205132403155228132601
6666666
5843-A5843-C
380435
180200
16,22 16,78
110117
132700132908
66
5843-A BIM5843-C BIM
400455
180200
17,17
17,25
110117
128178128246
66
5849 BIM 330 12015,57 110128598 6
5848 BIM 335 12015,57 110128536 6
5844-A BIM5844-B BIM5844-C BIM
425475475
180180190
16,93 16,93 17,29
115130117
128321128390128468
666
5844-A5844-B5844-C
405455455
180180190
16,44 16,44 16,70
115130117
133004133103133202
666
5848 335 12015,01 110236972 6
5849 340 12015,01 110906394 6
5850-B BIM 365 24018,65 110128666 65850-B 350 24018,12 110133370 6
5851-B5851-C5851-D5851-E
330370400420
215230240255
18,5118,81
19,15
19,37
110115120130
133400133509133608133615
6666
5851-B BIM5851-C BIM5851-D BIM5851-E BIM
345385415435
215230240255
18,93
19,14
19,63
19,75
110115120130
161625128796128864128932
6666
68 69
REF. g A mm£ B mm REF. g A mm£ B mm g A mm
Pointing Trowel 5901 REF. £ B mm g A mm
Pointing Trowel 5901 BIM REF. £ B mm
g A mm
Pointing Trowel 5902 BIM REF. £ B mmg A mm
Pointing Trowel 59 REF. £ B mm
g A mm
Pointing Trowel 5903 BIM REF. £ B mmg
g
A mm
A mm
Pointing Trowel 5903 REF. £
Re-pointing trowel 5913 BIM REF. £
B mm
B mm
Trowel 5914 BIM REF.
REF. £ g A mm B mm
Trowel 5914 B BIM REF.
REF. £ g A mm B mm
g A mm
Trowel 5917 BIM REF. £ B mm
Trowel 5915 BIM REF.
REF. £ g A mm B mm
g A mm
Pointing trowel 5904 BIM REF. £ B mmg A mm
Pointing trowel 5919 BIM REF. £ B mm g A mm
Trowel 5921 BIM REF. £ B mm
Trowel with beech handle.
Trowel 5857
Trowel with bimaterial handle.
Trowel 5857 BIM
Pointing trowel for finishing and touching up brickwork.Beech handle.
Pointing trowel for finishing and touching up brickwork.Bimaterial handle.
Pointing trowel for finishing and touching up brickwork.Bimaterial handle.
Pointing trowel for finishing and touching up brickwork.Beech handle.
Pointing trowel for finishing and touching up brickwork.Bimaterial handle.
Pointing trowel for finishing and touching up brickwork.Beech handle.
“goose neck” light Charleroi trowel. Bimaterial handle.
MASONRY / TROWELS AND POINTING TROWELS
“goose neck” Paris Trowel. Bimaterial handle.“goose neck” Brussels tiling trowel. Bimaterial handle.
“ goose neck” cat tongue trowel. Bimaterial handle.
“goose neck” Belgium model trowel for plastering. Bimaterial handle. Trowel for ceilings “goose neck” trapeziodal model. Bimaterial handle.
“goose neck” light Charleroi trowel. Bimaterial handle.
Forged re-pointer with bimaterial handle.
BU
ILD
ING
5902 BIM 145 135 13,59 60314519 65902 145 13512,90 60135107 6
5903 BIM 160 12513,59 75314595 65903
5913-06 BIM5913-08 BIM5913-10 BIM5913-12 BIM
160
110115120125
125
68
1012
12,90
4,14
4,19
4,40
4,62
75
180180180180
135206
623680623703623727623741
6
6666
5901-A5901-B5901-135901-15
145215150220
125150125150
12,90 14,75 12,90 14,75
70100
70100
134902135008160406160413
6666
5901-A BIM 145 125 12,91 70313963 65857-75857-85857-8,55857-9,55857-105857-11
200215260305340400
180200220240260280
13,59
13,74
13,90
16,23
16,50
16,73
819096
102110110
136654160321908657908732133691909319
666666
5857-7 BIM5857-8 BIM5857-8,5 BIM5857-9,5 BIM5857-10 BIM5857-11 BIM
200215260305340400
180200220240260280
14,60
15,03
15,18
17,59 17,78 17,94
819096
102110110
142761129397129335129465129533129595
666666
5914-180 BIM 460 18015,34 125610093 6 390 180 1255914-180 B BIM 14,97 624007 6
390 1805917-18 CC BIM 14,76 130624045 6305 170 1205915-17 CC BIM 15,05 624021 6
5904-14 CC BIM5904-16 CC BIM5904-18 CC BIM
125130135
140160180
13,3413,34
13,47
505050
624069624083624106
666
5919-14 CC BIM5919-16 CC BIM5919-18 CC BIM
165180200
140160180
14,2914,29
14,29
828895
624120624144624168
666
5921-16 CC BIM5921-18 CC BIM
345375
160180
14,70 14,76
115125
624182624205
66
70 71
g A mm
Plastering trowels 5861 REF. £ B mm g A mm
Plastering trowels 5861 BIM REF. £ B mm
A mm B mmREF. £ g A mm B mmREF. £ g
Plastering trowels 5861 A INOX REF. £ A mm B mmg
Plastering trowels 5861 A BIM INOX REF. £ A mm B mmg
A mm B mm
ABS trowel with a flexible plastic handle 5869 REF. £ g
AB
g A mm
Plaster scraper 5879 REF. £ B mm
Plastering trowel 5862 REF. £ A mm B mmg A mm B mm
Plastering trowel 5862 BIM REF.
REF. £ g
Plastering trowel 5863 BIM REF. £ A mm B mmg
Plastering trowel 5863 REF. £ A mm B mmg
Plastering trowel 5864 BIM INOX REF. £ A mm B mmg
Plastering trowel 5864 BIM REF. £ A mm B mmg
Plastering trowels 5864 A BIM INOX REF. £ A mm B mmg
Plastering trowel 5865 REF. £ A mm B mmg
A mm B mm
Plastering trowel 5865 INOX RREF. £ g REF. £ A mm B mmg
g A mm
Rendering scraper 5880 REF. £ B mm g A mm
Rendering scraper 5880 BIM REF. £ B mm
Plastering trowels
Advantages:• Long life.• Excellent finishing.• Ergonomic and lightweight.• Available in wooden and bimaterial handles:- Very light and pleasant to touch ergonomic poplar handle.- Bimaterial ergonomic handles manufactured from ABS and elastomer, very light which don’t change with
temperature differences. Non slip.Features:• Flexible high-quality and strong steel.• Varnished blades to prevent rust.• Perfect joint and flat blades.• Handle defined according to the user’s needs.Uses:• For finishing work.• For spreading and smoothing materials such as cement, mortar and plaster, etc.
Square wooden handled Plastering trowel. Square dual material handled Plastering trowel.
Square stainless steel Plastering trowel with wooden handle.
Plastering trowels 5861 INOX
Square stainless steel Plastering trowel with bimaterial handle.
Plastering trowels 5861 BIM INOX
Stainless steel trowel with sharpened edges and a flat base, without screws.
Stainless steel trowel with sharpened edges and a flat base,without screws.
ABS trowel with flexible edges. Light plastic handle. Plaster scraper, two hands.
MASONRY
Trapezoidal plastering trowel with wooden handle. Trapezoidal plastering trowel with bimaterial handle.
Rounded plastering trowel with bimaterial handle.Rounded plastering trowel with wooden handle.
Flat based stainless steel trowel, without screws.Flat based steel trowel, without screws.
Stainless steel trowel with sharpened edges and a flat base, without screws.
Long plasterer’s trowel with wooden handle.
Long stainless steel plasterer’s trowel with wooden handle. Stainless steel trowel with sharpened edges and a flat base,without screws. Plastic protector for the edge.Bi-material handle, very light and resistant to changes in temperature.
Plastering trowel 5867 A INOX BIM
BU
ILD
ING
Rendering mortar scraper with wooden handle. Rendering mortar scraper with dual material handle.R: Rendering mortar scraper replacement blade.
5861-005861-05861-15861-25861-3
345345400415450
270300300300300
7,42 7,42
7,80
7,92
8,08
135120150160180
133707133806133905134001134100
66666
5861-00 BIM5861-0 BIM5861-1 BIM5861-2 BIM5861-3 BIM
320320375390425
270300300300300
7,73
7,73
8,27
8,62
8,74
135120150160180
547160547184547207547221547245
66666
5861-1 INOX 8,46 300 150663037 6 400 5861-1 BIM INOX 8,89 300 150547269 6 375
5869 6,29 300 140594935 6 245
5861-1 A INOX 9,78 300 150592146 6 400 300 1505861-1 A BIM INOX 10,75 592160 6 375
5879 660 45021,96 85133479 1
5862 8,46 300 180134209 6 425 5862 BIM 9,28 300 180547283 6 400
5863 BIM 8,27 300 150547306 6 355
5865 INOX 13,55 480 150663112 6 662
5864 BIM INOX 8,59 280 120597974 6 400
5863 7,69 300 150134308 6 380
5864 BIM 7,98 280 120597950 6 400
280 1205864 A BIM INOX 11,57 597998 6 400 5865 12,15 480 150663075 6 655
5867 A INOX BIM 15,18 500 130598018 6 570
5880 420 250 8,67 145554519 6 5880 BIM5880-R
395284
250250
8,80 4,44
554533554557
66
145145
5880 420 250 145554519 6
72 73
A mm B mm
Pointed, polystyrene dent-proof float 5881 REF. £ g A mm B mm
Rectangular, polystyrene dent-proof float 5883 REF. £ g
AB
A mm B mm
Rectangular, polystyrene dent-proof float 5885 REF. £ g A mm B mm
Flat based, polystyrene dent-proof float 5887 REF. £ g
Pointed, polystyrene float 5882 REF. £ A mm B mmg
Rectangular, polystyrene float 5884 REF. £ A mm B mmg
Special cleaning sponge trowel 5889 REF. £ A mm B mmg
g A mm
Grout spreader 5876 REF. £ B mm
A
B
REF. g A mm£ B mm g A mm
Putty knife 5890 BIM REF. £ B mm
REF. g A mm£ B mm
g A mm
Taping knife 5899 REF. £ B mm
B
A
Floats
Advantages:• Maximum duration, does not deteriorate.• Ergonomic and light.• A wide range, various models and materials to choose from.• Available with a light plastic handle.Features:• Top quality dent-proof, polystyrene or polyurethane blade.• Perfect handle and base flatness. Studied handle space defined by the user’s needs.Uses:• For finishing tasks. To float or smooth cement, mortar surfaces, etc.
Pointed to access corners. Notched base. Rectangular with a notched base.
Rectangular with a notched base. Rectangular with a flat base.
With a point to access corners.Elongated base. Very light.
Square with an elongated base.Very light.
Large bristle pad, for floating.
MASONRY
Putty Knives
BU
ILD
ING
Putty knife 5890
Putty knife 5893
MASONRY
Benefits:• Long-lasting, no wear and tear.• Excellent flexibility and comfort when working, which enhances accuracy.• Comes with a wooden or bi-material handle.Characterisitics:• Top quality carbon steel and stainless steel.• Blades are rectified, aligned and polished.Use:• For finishing-off jobs.
Carbon steel spatula, wooden handle.
Stainless steel spatula, wooden handle.
Stainless steel spatula, wooden handle.
Carbon steel spatula, bi-material handle.
5881 5,13 270 140157598 12 225 5883 5,48 275 185157581 12 295
5885 6,38 330 220157574 12 380
5889 7,25 280 160445732 6 345
5882 4,10 262 140442922 12 175 5884 4,36 265 140443318 12 190
5887 6,38 360 190157567 12 380
5876 140 2003,02 131134032 12
5890-305890-405890-505890-605890-705890-805890-100
60626568727888
304050607080
100
2,89 3,06 3,24 3,41 3,62 3,75 4,70
212212212212212212212
098013098044098075098105098136098167098228
12121212121212
5893-405893-605893-805893-100
62687888
406080
100
4,87 5,31 5,95 7,38
212212212212
120035120028120042120066
12121212
5890-30 BIM5890-40 BIM5890-50 BIM5890-60 BIM5890-70 BIM5890-80 BIM5890-100 BIM
60626568727888
304050607080
100
2,49 2,64 2,78 2,93 3,13 3,24 4,05
223223223228228228228
635089635102635126635140635164635188635201
12121212121212
5899-250 BIM5899-400 BIM5899-500 BIM5899-600 BIM
260350410470
250400500600
6,68
8,12
9,17
10,33
180180180180
623840623789623802623826
6666
74 75
g A mm
Sledge hammer 5200 REF. £ B mm C mm M g A mm
Sledge hammer 5200 CF REF. £ B mm C mm M
AB
C
g A mm
Sledge hammer 5308 REF. £ B mm C mm M g A mm
Sledge hammer 5308 CF REF. £ B mm C mm M
g A mm
Sledge hammer 5305 REF. £ B mm C mm M
g A mm
Club hammer 5310 REF. £ B mm C mm M g A mm
Club hammer 5310 CF REF. £ B mm C mm M
REF. £ g A mm B mm C mm M
A
B
C
QU
ALI
TY
HAYA /BEECH
QU
ALI
TYHAYA /BEECH
CAR
BO
N
FIB
ER
ERG
ON
OM
IC
RES
ISTA
NT
PERFECT JOINT
CAR
BO
N
FIB
ER
PERFECT JOINT
CAR
BO
N
FIB
ER
PERFECT JOINT
PERFECT JOINT
QU
ALI
TY
HAYA /BEECH
PERFECT JOINT
QU
ALI
TY
HAYA /BEECH
PERFECT JOINT
QU
ALI
TY
HAYA /BEECH
PERFECT JOINT
Hammers
Square face mallet with beech handle. Straight face mallet with carbon fibre handle.
MASONRY
Special demolition work.
SLEDGE HAMMERS
Brickwork sledgehammer with beech wood handle.
Special quarry sledgehammer with beech wood handle.
Square face sledgehammer with beech wood handle.
Sledge hammer 5312
Woodworking hammer, carbon fibre handle.
Square hammer, carbon fibre handle.
BU
ILD
ING
Ideal for hitting different kinds of construction material and opening up grooves using a chisel or cold chisel.
SLEDGE HAMMERSBenefits:• Long-lasting, withstands wear and tear. • Reliable and safe to use. • Ergonomic, very comfortable handles that grip well and feel great in your hands.• Handles available in beech wood and CARBON FIBRE.Characteristics:• Top quality forged steel head that has been tempered and hardened in a homogenous and controlled
manner in the area used for hitting objects.• 3+ steel treatment: doesn’t break, warp or wear away.• Head and handle joined perfectly.• Beech wood handle, ideal for tools used for tapping or hitting objects, with patented fibre glass wedge.• Stronger, enhanced ergonomic TPS-elastomer carbon fibre handle with side grooves that enhance the
non-slip effect.Use:• In general, for tapping or hitting objects.• Specific use according to the product.
5200-25200-35200-45200-55200-65200-8
2.0003.0004.0005.0006.0008.000
600600700800800900
22,99 27,61 33,78 40,59 45,47 56,04
125143158170180194
445258626672
M 5200-2NM 5200-3NM 5200-4NM 5200-5NM 5200-6NM 5200-8
120806121001121209121407121605121803
666444
5200-3 CF5200-4 CF5200-5 CF5200-6 CF
3.0004.0005.0006.000
700700900900
34,04
36,37
41,54
47,84
143158170180
52586266
M 5200-4 CFM 5200-4 CFM 5200-6 CFM 5200-6 CF
625172625196625219625233
6644
5308-0 N5308-A N5308-B N
7001.0001.400
280280280
11,13 12,21 13,68
108123133
343943
M 5308-0NM 5308-ANM 5308-BN
624731353143353198
666
5305-05305-A
1.0001.250
235235
18,20 19,41
6267
6568
M 5305M 5305
249163123302
66
5310-A5310-B5310-C5310-D
8001.0001.2001.500
260260260260
11,13 12,21 13,68 15,10
839295
102
40414548
M 5310 AM 5310 AM 5310 CM 5310 C
661231661316661415661491
6666
5312-400 13,46 040432 6 1.120 400 163 34 M 5312
5308-0 CF5308-A CF5308-B CF
7001.0001.400
270270270
12,68 14,10
15,84
108123133
343943
M5308 CFM5308 CFM5308 CF
625028625059625073
666
5310-A CF5310-B CF5310-C CF5310-D CF
8001.0001.2001.500
270270270270
12,68 14,10 15,84 17,21
839295
105
40414548
M 5308 CFM 5308 CFM 5308 CFM 5308 CF
625097625110625134625158
6666
76 77
REF. g A mm£ B mm C mm M REF. g A mm£ B mm C mm M
REF. g A mm£ B mm C mm M REF. g A mm£ B mm C mm M
REF. g£ B mm C mm
REF. g A mm£ B mm C mm M REF. g A mm£ B mm C mm M
A
B
C
g gA mm A mm
Hammer 8002 REF. £
Hammer 8002 CF REF. £B mm B mmC mm C mmM
AB
C
g A mm
Hammer 8005 REF. £ B mm C mm M g A mm
Hammer 8005 CF REF. £ B mm C mm
REF.
Hammer 8003 CF REF.
REF. £ g gA mm A mm£B mm B mmC mm C mm
CAR
BO
N
FIB
ER
PERFECT JOINT
CAR
BO
N
FIB
ER
PERFECT JOINT
CAR
BO
N
FIB
ER
PERFECT JOINT
CAR
BO
N
FIB
ER
PERFECT JOINT
QU
ALI
TY
HAYA /BEECH
PERFECT JOINT
QU
ALI
TY
HAYA /BEECH
PERFECT JOINT
QU
ALI
TY
HAYA /BEECH
PERFECT JOINT
QU
ALI
TY
HAYA /BEECH
PERFECT JOINT
QU
ALI
TY
HAYA /BEECH
PERFECT JOINT CA
RB
ON
FI
BER
PERFECT JOINT
CAR
BO
N
FIB
ER
PERFECT JOINTCA
RB
ON
FI
BER
PERFECT JOINT
Pick 5932 N
Oval eye pickaxe hatchet digger, beech wood handle.
Pick 5932 CF
Pickaxe hatchet digger, carbon fibre handle.
Pick 5933 N
Oval eye pickaxe digger, beech wood handle.
Pick 5933 CF
Pickaxe digger, carbon fibre handle.
Pick 5938
Greek Skeparni.
Pick 5931N
Oval eye pickaxe hammer digger, beech wood handle.
Pick 5931 CF
Pickaxe hammer digger, carbon fibre handle.
• NEW ergonomic handles available in wood and carbon fibre, they are very comfortable, grip well and feel great in your hands.
• NEW oval eyes for maximum comfort when working, stops the handle turning around.• For use to Breaks up and loosens surfaces.
PICKAXES
Woodworking hammer, carbon fibre handle.Woodworking hammer, beechwood handle.
BU
ILD
ING
Carpenter’s hammer, beech wood handle. Carpenter’s hammer, carbon fibre handle.
Woodworking hammer, carbon fibre handle.
Hammer 8006 CF
Woodworking / formwork hammer, carbon fibre handle.
• To drive and remove nails, etc. from building materials, especially wood.
CONSTRUCTION WORK HAMMERS
MASONRY / PICKAXES
5932-00 N5932-0 N5932-A N5932-B N
300500600700
300300335335
13,45 14,32 14,44 16,10
205265290315
38394244
M 8007-BM 8007-BM 8007-CM 8007-D
631852631876631890631913
6666
5933-00 N5933-0 N5933-A N
300450600
300300335
13,19 13,57 14,57
205270300
3839
41,5
M 8007-BM 8007-BM 8007-C
631937631951631975
666
5932-0 CF5932-A CF
300500
330330
18,31 18,49
205265
3839
M 8007-B T330M 8007-B T330
632019632033
66
5933- 0 CF5933- A CF
300450
330330
17,32 18,65
205270
3839
M 8007-B T330M 8007-B T330
632057632071
66
5938-SM 36012,51 122 42999457 12
5931-AN5931-BN
520650
300335
14,86 15,90
188203
4547,5
M 8007-BM 8007-C
631777631814
66
5931- A CF 19,02 631999 6 520 330 188 45 M 8007-B T330
8002-138002-168002-208002-24
8002-13 CF8002-16 CF8002-20 CF8002-24 CF
350450540660
350450540660
300315330345
300325325345
12,04 13,07 13,85 14,97
13,84 15,03 15,93 17,21
118130135147
118130135147
27283033
27283033
M 8002-13 M 8002-16M 8002-20M 8002-24
363708611915611939611953
625271625295625318625332
6666
6666
8005-168005-A8005-B8005-C8005-D8005-E8005-F
95135180230320435550
259269279289304319334
7,68 6,99
7,29
7,89
8,93
9,45
10,18
768490
100105115122
16182022252830
M 8005-16M 8005-AM 8005-BM 8005-CM 8005-DM 8005-EM 8005-F
139402138207138504138801139006139105139204
6666666
8005-A CF8005-B CF8005-C CF8005-D CF8005-E CF
135180230320435
274275294297301
10,46 10,92 11,81 12,94 13,68
8490
100105115
1820222528
439410439458439496439533439571
66666
8003-20 CF 570 32516,25 150 30625356 6 8006 CF 570 32517,51 170 26625370 6
78 79
g A mm
Hammer 8008 REF. £ B mm C mm M
g A mm
Hammer 8013 REF. £ B mm C mm M
g A mm
Hammer 8017 T REF. £ B mm C mm Mg A mm
Hammer 8017 REF. £ B mm C mm M
REF. REF. g A mm£ B mm C mm M
REF. g A mm£ B mm C mm M
g A mm
Hammer 8007 REF. £ B mm C mm M
REF. g A mm£ B mm C mm M
g A mm
Hammer 8009 REF. £ B mm C mm M
REF.
g
g
A mm
A mm
Hammer 8011 CF REF. £
£
B mm
B mm
C mm
C mm
QU
ALI
TY
HAYA /BEECH
PERFECT JOINT
QU
ALI
TY
HAYA /BEECH
PERFECT JOINT Q
UA
LITY
HAYA /BEECH
PERFECT JOINT
QU
ALI
TY
HAYA /BEECH
QU
ALI
TY
HAYA /BEECH
PERFECT JOINT
QU
ALI
TY
HAYA /BEECH
CAR
BO
N
FIB
ER
PERFECT JOINTQ
UA
LITY
HAYA /BEECH
PERFECT JOINT
QU
ALI
TYHAYA /BEECH
PERFECT JOINT Q
UA
LITY
HAYA /BEECH
PERFECT JOINT
REF.
CAR
BO
N
FIB
ER
PERFECT JOINTCA
RB
ON
FI
BER
PERFECT JOINT
Axe hammer with beech handle.
Carpentry hammer, conical socket with beech handle.
Shuttering hammer with triple material handle. CI: With magnet.Shuttering hammer with beech handle. CI: With magnet.
Hammer 8030
Shuttering hammer with beech handle.Claw shaped to extract nails from 0-1 mm.CI: With magnet.
Hammer 8030 T
Shuttering hammer with triple material handle.Claw shaped to extract nails from 0-1 mm.CI: With magnet.
MASONRY / HAMMERS FOR WOOD AND BUILDING
Hammer 8004
Orange wood hammer with beech handle.
Carpentry hammer with beech handle.
BU
ILD
ING
Hammer 8011
• Ideal for hitting objects, mainly steel or metal sheets; joints, riveting, welded seams and mechanical adjustments in general.
• MAXIMUM SAFETY: Non-Toughened hammers: Recommended for striking hard materials, of more than 46 HRc, while avoiding breakage. With continued use, the hammer will lose its shape but not its striking capacity, thereby ensuring maximum safety for the user.
INDUSTRIAL HAMMERS
Ball-peen machinist’s hammer, beech wood handle.
Peen machinist’s hammer, beech wood handle.
Ball-peen machinist’s hammer, carbon fibre handle.
Hammer 5454
Boilermaker’s caulking hammer, beech wood handle.
Untempered mallet, carbon fibre handle.
Non-Toughened 8011 hammer
NON-TOUGHENED Ball-peen machinist’s hammer, Carbon Fiber handle.
8008 570 37520,84 167 29 M 8008140408 6
8013-A8013-B
170230
280280
11,56 11,95
8996
2022
M 8013-AM 8013-B
142204142402
66
8017-0 CI T3908017-A CI T390
250300
390390
26,75 27,52
126133
2225
M 8017-A T390M 8017-A T390
553307553284
66
8017-08017-A8017-B8017-C8017-D8017-0 CI8017-A CI
250300400500600250300
450450450450450450450
13,07 13,55 14,32 15,27 17,39 13,55 14,06
126133140148157126133
22252628302225
M 8017-AM 8017-AM 8017-BM 8017-CM 8017-DM 8017-AM 8017-A
932591143003143102143201143300458312159073
6666666
8030 CI
£ g A mm B mm C mm M 15,31 469851 6 600 450 172 30 M 8030 8030 CI MT 20,23 469479 6 600 500 172 30 M 8030 T
8004-A PUL 500 32531,71 148 31 M 8004137903 6
8007-A8007-B8007-C8007-D8007-E8007-F
350475550670725870
280280280310310335
11,82 12,73 13,42 14,28 15,01 17,21
106114122130138146
272931333537
M 8007-AM 8007-BM 8007-CM 8007-DM 8007-EM 8007-F
139600139808140002140101140200140309
666666
8011-A8011-B8011-C8011-D8011-E8011-E CORTO8011-F8011-G8011-H
230320420540700700870
1.0701.320
299299319319349250349388388
9,53 9,88 10,57 11,43 12,51 12,51 13,59 14,75 16,26
809098
108118118128138145
252730323434363840
M 8011-AM 8011-BM 8011-CM 8011-DM 8011-E
M 8011-FM 8011-GM 8011-H
141009141207141405141603141702586046141801141900142006
666666666
8009-A8009-B8009-C8009-D8009-E
320420540700870
870
299319319349349
358
12,21 13,72 13,93 15,06 16,57
21,28
94105114124133
128
2730323436
36
M 8011-BM 8011-CM 8011-DM 8011-EM 8011-F
140507140606140705140804140903
635546
66666
6
8011-C CF8011-D CF8011-E CF8011-F CF8011-G CF
8011-F 0HRc CF
420540700870
1.070
333333358358384
16,36 17,73 19,36 21,02 22,81
98108118128138
3032343638
634150634174634198634211634235
66666
5454-450
£ g A mm B mm C mm M 10,91 072211 6 450 319 170 25 M 8005-E
Non-Toughened 5308 hammerREF. £ g A mm B mm C mm M
5308-A 0HRc CF 13,78 635522 6 1.000 270 123 39 M 5308 CF
80 81
g A mm
Hammer 8050 REF. £ B mm C mm M REF. g A mm£ B mm C mm
g A mm
Hammer 8052 REF. £ B mm C mm M REF. g A mm£ B mm C mm
g A mm
Spare head BB 8050 REF. £ B mm C mm g A mm
Spare head BS 8052 REF. £ B mm C mm
g A mm B mm g A mm
Point chisel 5821 CP REF. £ B mm
REF. g A mm£ B mm C mm REF. g A mm£ B mm C mm
A
B
C
QU
ALI
TY
HAYA /BEECH
PERFECT JOINTQ
UA
LITY
HAYA /BEECH
QU
ALI
TY
HAYA /BEECH
PERFECT JOINT
Replaceable nylon spare tips, beech wood handle. Replaceable nylon bounce proof spare tips, plastic handle.
Hammer 8051
Replaceable super plastic bounce proof spare tips, beech wood handle. Special spark proof copper head hammer, beech wood handle.
Hammer 8055
Hard white nylon head for working on every type of assembly. Hard super plastic head, resistant to abrasion, corrosion and themajority of chemical products.
BU
ILD
ING
Point chisels, chisels and cold chisels
Chisel 5825 Chisel 5825 CP
Advantages:• Long life.• Maximum safety for the user. No splinters.• Protector with three levels for greater hand protection.Features:• Top quality induction tempered steel, fully hardened: Chrome Vanadium Steel, professional blue line and
carbon steel, red line.• Definition of shapes and hardness perfectly balanced..• Different heat treatments in three areas: head, point and body.• Ground, bevelled and varnished points.• Water-based paint. Respects the environment.Uses:• For opening cracks and breaking.• For eliminating remains of concrete, cement and other materials from building work.
CP: with protector
Construction: Octagonal body pointer, Vanadium steel. Construction: Octagonal body pointer, Vanadium steel.
Construction: Octagonal body chisel, Vanadium steel. Construction: Octagonal body chisel, Vanadium steel.
MASONRYMASONRY / INDUSTRIAL HAMMERS
8052-508052-70
2.0003.500
358408
33,99 54,57
152165
5070
M 8052-50M 8052-70
608809608847
36
8055-8008055-1000
8101.075
290305
35,20 50,99
8985
3238
669305659665
36
BB 8050-25BB 8050-32BB 8050-38BB 8050-44BB 8050-50BB 8050-63
81423374871
253238445063
2,23 2,80 3,49 4,14 5,35 7,12
171718202021
323844506332
531312531350531398531435531473573756
121212121212
BS 8052-44BS 8052-50BS 8052-70
5268
154
445070
6,08
7,77
12,68
292630
384450
608922608960615791
121212
8050-258050-328050-388050-448050-50
185300500630
1.030
255275285300335
9,36 11,22 14,49 19,59 30,93
100102112120140
2532384450
M 8050-25M 8050-32M 8050-38M 8050-44M 8050-50
530476530513530551530599530636
66666
8051-328051-388051-448051-508051-63
525750950
1.2502.000
280300315320370
23,64 26,83 31,54 36,97 55,30
127138143151163
3238445063
608526608564608601608649608687
66633
Point chisel 5821 REF. £
5821-14x1505821-14x2005821-14x2505821-16x2005821-16x2505821-16x3005821-16x3505821-16x4005821-18x2505821-18x3005821-18x3505821-18x4005821-20x3005821-20x3505821-20x400
160230290300380470550640480580690800710830960
150200250200250300350400250300350400300350400
5,28
5,47
5,82
5,71
6,17
6,37
6,95
7,45
6,60
7,14
7,65
8,23
7,84
8,39
9,55
141414161616161618181818202020
127607127706127904128109128208128307128406128505128604128703128802128901129007129106129205
666666666666666
5821-14x250 CP5821-16x250 CP5821-16x300 CP5821-18x250 CP5821-18x300 CP5821-18x350 CP5821-18x400 CP
460550640630750860970
250250300250300350400
7,88 8,23 8,43
8,62 9,24 9,67 10,17
14161618181818
037944038125038163038200038248038286360547
6666666
5825-14x1505825-14x2005825-14x2505825-16x2005825-16x2505825-16x3005825-16x3505825-16x4005825-18x2505825-18x3005825-18x3505825-18x4005825-20x3005825-20x3505825-20x400
160230290300380470550640480580690800710830960
150200250200250300300400250300350400300350400
5,55 5,75
6,17
6,17
6,60
6,68
7,18
7,84
6,95
7,65
7,65
8,74
8,39
9,05
9,98
141414141616161618181818202020
202020232323232326262626303030
129403129502129700129908130003130102130201130300130409130508130607130706130805130904131000
666666666666666
5825-14x250 CP5825-16x250 CP5825-16x300 CP5825-18x250 CP5825-18x300 CP5825-18x350 CP5825-18x400 CP
470550640650750860970
250250300250300350400
8,23 8,62
8,77 9,05 9,71 10,17 10,68
14161618181818
20232326262626
038446038484038521038569038606038644360615
6666666
82 83
A
B
C
REF.
REF.
g
g
g
A mm
A mm
A mm
Cold chisel 8251 REF. £
£
£
B mm
B mm
B mm
C mm
C mm REF.
REF.
g
g
g
A mm
A mm
A mm
Cold chisel 8251 CP REF. £
£
£
B mm
B mm
B mm
C mm
C mm
C mm
REF. g A mm£ B mmREF. A mm£ B mm C mm
A
BC
REF. g A mm£ B mm C mm
A
B
C
REF. g A mm£ B mm C mm
REF. g A mm£ B mm C mm REF. A mm£ B mm C mm
A
BC
g A mm
Plaster pointers 8280 REF. £ B mm g A mm
Plaster pointers 8281 REF. £ B mm
A
B
Graver 8241
Chisel 8271 Chisel 8271 CP
Industry: Mechanical graver. Vanadium chrome.
Pointer 25821
Construction: Flat cold chisel, Vanadium chrome.
Construction: Wide bladed chisel, Vanadium steel.
Construction: Octagonal body pointer, Carbon steel.
Chisel 25825
Construction: Flat cold chisel, Vanadium chrome.
Construction: Wide bladed chisel, Vanadium steel.
Construction: Octagonal body chisel, Carbon steel.
MASONRY / CHISELS AND COLD CHISELS
Stand
Chisel 8245
Industry: Mechanic’s chisel, Vanadium steel.
BU
ILD
ING
Chisel 8255
Chisel 8261 Stand
Industry: Electrician’s chisel, Vanadium steel.
Industry: Tinsmith’s chisel, Vanadium steel.
MASON PINS
Uses:• Holds rules for the application of construction materials.
Round profile. Square profile.
8241-1758241-2008241-250
170290455
175200250
10,70 11,73 12,94
172023
145700145809145908
666
8251-1508251-1758251-2008251-2258251-2508251-3008251-3508251-400
8271-608271-708271-808271-908271-100
25821-14x25025821-16x25025821-16x30025821-16x35025821-18x400
160180315360500610720830
450470540565590
290380470550800
150175200225250300350400
230230230230230
250250300350400
5,18 5,69
6,17
6,64
7,55
8,28
9,36
10,09
6,93 7,50
8,92
10,68
13,76
3,49 3,70
3,82
4,17
4,94
1718222225252525
2323262626
1416161618
1819222225252525
60 70 80 90100
660609146004146103146301146400146509146608146707
624816037241037272624847624878
614459614480614510614541614572
66666666
66666
66666
8251-250 CP8251-300 CP8251-350 CP8251-400 CP
8271-60 CP8271-80 CP8271-100 CP
25825-14x25025825-16x25025825-16x30025825-16x35025825-18x400
670780890
1.000
620710760
290380470550800
250300350400
230230230
250250300350400
9,79 10,66 11,60 12,29
9,70 12,04 17,20
3,70 3,96 4,01 4,31
5,24
25252525
232626
1416161618
25252525
60 80100
2023232326
038804038842038880038927
624908624922624946
046861614336614367614398614428
6666
666
66666
8251-200 - 12 8251-250 - 12 8251-300 - 128251-350 - 12 5821-18x250 - 6 5821-18x300 - 65825-18x250 - 6
8952 110511,38 420 220411898 1
8245-2008245-2508245-3008245-350
330400600700
200250300350
6,64 6,90
7,46 7,81
22222323
26262929
660647660685660722660760
6666
8255-8x2008255-10x2008255-10x2508255-12x2008255-12x2508255-12x300
6090
110100120140
200200250200250300
6,00 6,17 6,21 6,17 6,38 6,51
688888
81010121212
660883660920660968661002661040661088
666666
8261-240 300 240 9,19 26 26661125 6 8240 110456,16 420 220539141 1
8280-2008280-2508280-300
220250280
200250300
2,60 2,66 2,72
120120120
037364037395037425
666
8281-2008281-2508281-300
245285330
200250300
2,66 2,69 2,90
120120120
037494037555037616
666
8245-200 - 6 8245-250 - 6 8245-300 - 68261-240 - 6 8241-200 - 6 8241-250 - 68255-8x200 - 6 8255-10x250 - 6 8255-12x300 - 6
84 85
REF. £
Adapter for drill mixer rods REF. £ g
REF. £
g A mm
Mixer paddle 50787 REF. £ B mm g A mm
Mixer paddle 50788 REF. £ B mm
A
B
Advantages:• Engine:- Electronic speed setting matching useful power to the material’s density and mixture size with the option
for a slow start up preventing the mixture uncontrollably splashing outwards.- Maximum useful power at all operating speeds: including very slow speeds.• Ergonomic and comfortable:- Bimaterial, polypropylene and elastomer grips sloping at 20o That improves ergonomy.- Easy to use with the button on the ring allowing the speed to be set without having to constantly press
down on the tab and speed selector facilitating speed adjustment.• Lightweight:Very light for very intensive jobs.Uses:• For mixing mortar, cement, resin, paints, adhesive, etc.
Engine powerVoltageEngine speedMax. rod diameterMixing capacityNet weight
M12LIGHT
1.200 W220-240 V
0-800120 mm
40 L3,45 Kg
Features
Mixer
Includes rod 50787-120
Mixer
50787-140: 2 uds.50787-140: 2 uds.
Packaging:Case with two 50787-140 rod.
Engine powerVoltageEngine speedMax. rod diameterMixing capacityNet weight
M15VM
1.500 W230V-50 Hz
150-300 / 300-650160 mm
95 L5,2 Kg
FeaturesM17VM
1.700 W230V-50 Hz
150-300 / 300-650160 mm
110 L5,6 Kg
MixersMASONRY
BU
ILD
ING
REF.
50787-7050787-9050787-10050787-12050787-14050787-160
MACCHINA
drilldrill
Power MixerPower MixerPower MixerPower Mixer
Adapt.
Hex. 8Hex. 8
M14M14M14M14
L
4-77-10
10-1510-1515-3030-50
W
400500900900
1.0001.200
RPM
400-500400-500400-700400-700300-600300-600
Features
7090
100120140160
UsesPutties
Adhesive mortarsFillersAdhesive cementRapid mortarAdhesive mortar with fibre
50787
xxxxxxxxx
Weighing
MortarsFloatsPavingHeat insulating floatEpoxy resinConcrete
50787
xxxxxxxxx
UsesPutties
Adhesive mortarsFillersAdhesive cementRapid mortar
50788
xxx
xxxx
Weighing
MortarsFloats
50788
xx
REF.
50788-8550788-115
MACCHINA
drilldrill
Adapt.
Hex. 8Hex. 10
L
5-1010-15
W
500700
RPM
700-900500-700
Features
85115
MixersMASONRY
M12LIGHT 116,35 607567 1 M15VMM17VM
188,81 209,78
550245550252
11
XX
AM 101201 23,47 300319941 1
50787-7050787-9050787-10050787-12050787-14050787-160
287380984
1.1901.3001.700
7090
100120140160
12,55 13,72 20,53 21,57 26,40 33,86
400400590590590590
282122282207282252282320282375282443
662222
50788-8550788-115
353784
85115
11,95 11,26
400590
282498282566
66
86 87
REF. A mm£ B mm C mmKgKgPalletBox
GARANTÍA 3 AÑOS G
ARANTIA 3ANNOS
REF. A mm£ B mm C mmKgKgPalletBox
GARANTÍA 3 AÑOS G
ARANTIA 3ANNOS
TECH Tile cutterTILING
Advantages:• One-piece design philosophy: Designed to work as a single unitary piece to guarantee a tool that is precise,
sturdy and durable. TECH is designed to work with precision, day after day and cut after cut. • Sturdiness: Built with high-performance materials, TECH has a patented assembly system and its design has
been optimized piece by piece resulting in a longer-lasting machine. • We use the best materials and structure designs to maximize rigidity and eliminate twisting and bending. The
patented assembly design results in the highest transmission of tile-breaking force and enhanced durability.• Precision: The solidity and rigidity of the core structure help ensure a clean and straight cut even with large
tiles. A force of only 2 kg / 4.4 lbs is necessary to properly score the tile.• Lightweight: While the TECH is a sturdy, high-performance machine for large tile formats Its optimized design
and materials guarantee a lightweight and manoeuvrable tile cutter.Features:• SLIDERS: Maximum scoring smoothness, precision and durability thanks to double self-lubricating bushings.• SEPARATOR: Heavy-duty breaking arch with up to 1,000 kg / 2,205 lbs capacity for easy and clean tile
separation , even high-density porcelain.• CENTRAL PIVOT SWIVEL SQUARE: Combines ruler, square and stopper for precise and repetitive cuts. • GUIDING SYSTEM: Unique guiding system built with round rail bars made of chrome-plated solid steel and
aluminium stands for maximum wear resistance, smooth gliding and precise scoring.• CONSTRUCTION: Patented assembly design: the reinforced base, rail holders and guiding system are designed
as a single unitary piece to guarantee a tile cuter that is precise, sturdy and durable.• DOUBLE ROTATING PROTACTORS: This patented feature allows optimal support and enhanced cutting
versatility at all angles.• CENTRAL BREAKER RIB: Made of high-quality steel to resist to abrasion, guarantees an easy and clean tile
break.• FLOATING BASE: Spring-loaded aluminium base offers an open working surface with maximum stability and
dampening.• FOLDABLE SIDE ARM EXTENSIONS: Integrated into the base to facilitate the positioning of larger tiles while
offering better support and stability.Uses: • Large Formats (125 cm / 49.2 inches)
TECH
BU
ILD
ING
PRO Tile cutter
PRO
Advantages:• Greater comfort whilst working, for both left and right handed users, as the cut can be made without the
need to remove the scoring lever.• Long term maximum precision and robustness.• Professional. High breaking power.• Easy to place and excellent sliding of the ceramic. Easy to clean.• Hand grip whilst you work without free fall.• The scoring wheel quickly adjusts to the thickness of the tile and can be changed very quickly.• Includes lateral block for repetitive cuts and cuts at a 45º angle.Features:• Separating mechanism located outside the guides. PATENT PENDING.• Ambidextrous, progressive separator mechanism. PATENT PENDING.• Zamak sliders with extra-wide self-lubricating bushings.• Robust, ribbed and extra-wide aluminium risers with two anchor points.• Base with a unique design that combines aluminium and a smooth steel central surface.• Toolholder reinforced with a steel centre shaft and with interior brakes.• Round guides made of solid, chromed steel.• Registered design.Uses: • For high intensity work.• For cutting average sizes, medium and hard materials, up to 72 cm in length and maximum widths of 15 mm.
REF.
PRO 55PRO 65
58 cm72 cm
40 x 40 cm50 x 50 cm
15 mm15 mm
PRO
TILING
Includes 6 mm. and 10 mm. scoring wheels.TECH 75: Includes 8 mm. scoring wheel.TECH 100/125: Includes 10 mm. scoring wheel.
TECH 75TECH 100TECH 125
76 cm100 cm125 cm
52 x 52 cm70 x 70 cm88 x 88 cm
20 mm20 mm20 mm
REF.
TECH TECH 75TECH 100TECH 125
98312231473
372,69
434,81
538,33
362362362
230230230
622058634259622065
2124,529,2
15,417,921
1288
111
XXX
PRO 55PRO 65
775915
190,57
238,21
330330
110110
622034622041
14,915,8
10,811,9
1212
11
XX
88 89
6 mm Universal Scoring Wheel
REF. £ A mm
A mm
B mm
B mm
g
g
Box
8 mm Universal Scoring Wheel REF.
REF. £ Box
REF.
10 mm Universal Scoring Wheel REF. £
£
A mm
A mm
B mm
B mm
g
g
Box
Box
A mm
A mm
A mm
B mm
B mm
B mm
g
g
g
8 mm Titanium Universal Scoring Wheel REF. £ Box
18 mm Titanium Universal Scoring Wheel REF. £ Box
10 mm Titanium Universal Scoring Wheel REF. £ Box
OPTIONAL BLOCK OPTIONAL
TUGSTENCARBIDE
REF. A mm£ B mm C mmKgKgPalletBox REF. A mm£ B mm C mmKgKgPalletBox
GARANTÍA 3 AÑOS G
ARANTIA 3ANNOS
BU
ILD
ING
How to attach the universal adaptor to use the Bellota scoring wheel in other brands’ manual ceramic cutters.
* Brands from companies that are not part of the Corporación Patricio Echeverría.
Scoring wheels
18 mm Universal Scoring Wheel
For use on ceramic coatings.
For use on stoneware and porcelain stoneware.
For use on porcelain and ceramic stoneware.
For use on porcelain and ceramic stoneware.
To be used on rustic paving stones and cladding or paving stones that are difficult to cut.
To be used on rustic paving stones and cladding or paving stones that are difficult to cut.
For use on stoneware and porcelain stoneware.
Advantages:• Universal scoring wheels that can be used with both Bellota tools and other manual cutters thanks to the
adaptor that comes with each scoring wheel (needed for a perfect adjustment).• Highly resistant and durable, last for up to 25% longer.• Titanium line, which lengthens the life of the roller even more, up to 25% more compared to the rest of the line.• Excellent precision throughout the line, especially the 18 mm scoring wheel, thanks to its golden ration, which
also requires less cutting effort which results in the product lasting for longer. • Available in 6, 8, 10 and 18 mm measurements.Features:• Universal scoring wheel designs which also comes with a universal adaptor for a perfect adjustment in other
ceramic cutters from brands other than Bellota. PATENT PENDING.• All the scoring wheel handles are made from forged steel with an octagonal section.• High quality Tungsten Carbide scoring wheel.• Special titanium carbonitride coating for the Titanium line.• Golden ratios on the 18 mm measurement which gives greater stability and support to the axis of rotation
PATENT PENDING.Uses: • For use with the Bellota POP and PRO line machines.• Comes with the universal adaptor for use with manual ceramic cutters from the following brands: Cortag*,
Irwin*, Toolkraft*, Rubi*; Pocket range*, Star*, TS* and TR*.
TILING
POP Tile cutter
Advantages:• Long term, maximum precision.• Maximum durability, rigidity and stability.• Excellent scope guide and load distribution in the break-separation.• Hand grip whilst you work without free fall.• Versatile and comfortable to use.• Very light and easily transportable.Features:• Robust, ribbed and closed risers. Extra wide, with larger bearing surface at the base and a double anchor.• Trapeziodal technical polymer runners, closed and extra wide.• Injected aluminium base, extra wide with ribbed central profile, rubbers and side wings.• Toolholder reinforced with a steel centre shaft and with interior brakes.• Round guides made of solid, chromed steel.• Registered design.Uses: • For cutting everyday shapes in paving stones and tiles.• Up to 63 cm in length and maximum widths of 12 mm.
POP POP R
REF.
POP 50-BPOP 50-CPOP 60-BPOP 60-C
53 cm53 cm63 cm63 cm
38 x 38 cm38 x 38 cm45 x 45 cm45 x 45 cm
12 mm12 mm12 mm12 mm
POP
REF.
POP 50-R-BPOP 50-R-CPOP 60-R-BPOP 60-R-C
53 cm53 cm63 cm63 cm
38 x 38 cm38 x 38 cm45 x 45 cm45 x 45 cm
12 mm12 mm12 mm12 mm
POP
TILING
Trapeziodal technical polymer runners. Includes 6 mm. scoring wheel. Aluminium runners. Includes 6 mm. scoring wheel.
RODEL6U
RODEL10U
RODEL8UT
RODEL18UT
5,95
7,68
8,54
11,99
85
87
85
90
8
9
8
10
622072
622119
622157
622195
50
60
55
70
10
10
10
10
RODEL8U
RODEL18U
RODEL10UT 6,82
10,27
9,4085
90
87 8
10
9622096
622133
62217155
70
6010
10
10
POP 50-BPOP 50-CPOP 60-BPOP 60-C
700700800800
47,45
56,08
64,71
73,34
180180180180
105105105105
621969621976622355621990
4,45,74,86,7
4,14,14,54,5
48244824
6464
-X-X
POP 50-R-BPOP 50-R-CPOP 60-R-BPOP 60-R-C
700700800800
56,08
64,71
73,34
81,97
180180180180
105105105105
621983622003622010622027
4,55,84,96,8
4,24,24,64,6
48244824
6464
-X-X
90 91
A mm
A mm
B mm
B mm
g
g
XL 8 mm Universal Scoring Wheel REF
REF. £ Box
XL 10 mm Universal Scoring Wheel REF. £ Box
REF. £ A mm B mmgBox
A mm
A mm
A mm
B mm
B mm
B mm
XL 8 mm Titanium Universal Scoring Wheel REF. £ Box g
XL 18 mm Titanium Universal Scoring Wheel REF. £ Box g
XL 10 mm Titanium Universal Scoring Wheel REF. £ Box g
REF. g A mm£ B mm REF. g A mm£ B mm
REF.REF.
Tile spacer 1 mm REF. £
Tile spacer 3 mm REF. £
Tile spacer 7 mm REF. £
££
Tile spacer 2 mm REF. £
Tile spacer 5 mm REF. £
Tile spacer 10 mm
REF. £
A mm
A mm
A mm
A mmA mm
A mm
A mm
A mm
B mm
B mm
B mm
B mmB mm
B mm
B mm
B mm
C mm
C mm
C mm
C mmC mm
C mm
C mm
C mm
g
g
g
gg
g
g
g
Box
Box
Box
BoxBox
Box
Box
Box
Bolsa
Bolsa
Bolsa
BolsaBolsa
Bolsa
Bolsa
Bolsa
REF. £ A mm B mm C mmgBoxBolsa
Pliers
Advantages:• Long-lasting and strong, withstand wear and tear.• Makes cutting much easier.Features:• Top quality steel.• Tungsten carbide cutting edges.• The cutting edges are perfectly aligned.Uses:• To improve or go over cuts on ceramic tiles and vitreous glass mosaic tiles (gresite).
TILING
TILING / SCORING WHEELS
XL 18 mm Universal Scoring Wheel
Especially for ceramic tiles to go over straight cuts.
Pliers 6003
Especially for ceramic tiles to go over inner holes.
Pliers 6004
BU
ILD
ING
Tile spacers, T and wedges
Advantages:• Maximum precision, which guarantees a excellent finish in the joints.• Tiles keep in place both vertically and horizontally. They do not move.• Maximum durability and strength.• They can be piled up, tile spacer 5 and 7 mm, so height is gained without losing precision.Features:• Squared perfectly at 90o.• Reinforced structure.• Made with 100% virgin material, no impurities.• Homogenous quality, no chipped edges.Uses:• To obtain the perfect joints when laying ceramic pieces, both in terms of wall tiles and floor tiles.• Maximum strength, reinforced and rigid tile spacers that are ideal to use with large format ceramic.
TILING
T 3mm T 5mm
Wedges
For use on porcelain and ceramic stoneware.
To be used on rustic paving stones and cladding or paving stones thatare difficult to cut.
For use on porcelain and ceramic stoneware.
To be used on rustic paving stones and cladding or paving stones thatare difficult to cut.
For use on stoneware and porcelain stoneware. For use on stoneware and porcelain stoneware.
RODELXL8U
RODELXL18U
RODELXL8UT
RODELXL18UT
8,61
16,11
10,31
17,76
103
103
103
103
8
11
8
11
622218
622256
622270
622317
40
55
45
55
10
10
10
10
RODELXL10U RODELXL10UT 9,44 11,14103 103 10 10622232 62229445 5510 10
6003 350 21510,60 50,5628982 6 6004 260 19610,60 32629002 6
1SP21SP10
3LSP23LSP10
7SP27SP5
2SP22SP10
5SP25SP5
10SP2
1,544,82
1,72
6,02
2,84
5,16
1,544,82
2,58
4,65
4,63
11
33
77
22
55
10
2828
3838
4040
2828
4040
40
33
3,53,5
77
2,82,8
55
7
630701630800
630749630848
630787630886
630725630824
630763630862
634310
40150
120580
210500
60280
190400
400
10035
5010
3012
10025
3015
18
2001000
2001000
200500
2001000
200500
200
3TS2
6WD26WD10
1,72
1,726,02
3
66
38
2929
3,5
1010
630909
630947630961
90
100490
80
11025
200
2001.000
5TS2 2,58 5 35 6630923 16065200
XL SCORING WHEELS
92 93
A mm B mm
Notched trowels 5871 REF.
REF. £ g A mm B mm
Notched trowels 5871 BIM REF. £ g
g A mm
Notched trowels 5873 REF. £ B mm g A mm
Notched trowels 5873 BIM REF. £ B mm
Notched trowels 5873 R REF. £ A mm B mmg A mm B mm
Notched trowels 5873 R BIM REF. £ g
AB
A mm B mm
Float 5875 REF. £ g
Float 5875 R
REF.
£
A mm B mmg
g A mm B mmg A mm B mm
Float 5874 BIM INOX REF. £
Float 5874 R BIM INOX REF. £
AB
Light tiling trowel 5898 A REF. £ A mm B mmg
Compounded tiling trowel 5898 B REF. £ A mm B mmg
Hard tiling trowel 5898 C REF. £ A mm B mmg
Notched trowels
Advantages:• Long life.• Excellent finishing.• Ergonomic and lightweight.• Available in wooden and bimaterial handles:- Very light and pleasant to touch ergonomic poplar handle.- Bimaterial ergonomic handles manufactured from ABS and elastomer, very light which don’t change
with temperature differences. Non slip.Features:• Flexible high-quality and strong steel.• Varnished blades to prevent rust.• Perfect joint and flat blades.• Handle defined according to the user’s needs.Uses:• Preparing surfaces for tiling.• For spreading adhesive to attach ceramic materials.
Triangular toothed Notched trowels with wooden handle. Triangular toothed Notched trowels with bimaterial handle.
Crenellated toothed Notched trowels with wooden handle.The last two digits in the reference number state the tooth size in mm.
Crenellated toothed Notched trowels with bimaterial handle.The last two digits in the reference number state the tooth size in mm.
Curved tooth Notched trowels with wooden handle. Curved tooth Notched trowels with bimaterial handle.
TILING
Long float with crenellated teeth and wooden handle. Long float with curved teeth and wooden handle.
Curved tooth float, stainless steel, open handle.Castle tooth float, stainless steel, open handle.
BU
ILD
ING
Special tiling trowels
Advantages:• Long life.• Excellent finishing and wide adaptability, given the different available bases.• Ergonomic and light.• Poplar wood handle, light weight and comfortable grip.Features:• High impact, polystyrene bases with abrasion resistant rubbers.• Perfect handle and material joints.• Ergonomic handles.Uses:• For tiling, mainly spreading and removing material in grouting.
EVA rubber, very flexible and adaptable to all types of surfaces.Very light.
A very flexible polyurethane sponge adaptable to all surfaces,covered by a layer of rubber very resistant to abrasion.
Manufactured with strong, abrasive resistant rubber.Ideal for wider joints.
TILING
5873-035873-065873-085873-105873-12
343340340337335
270270270270270
7,92 7,92 7,92 7,92 7,92
135135135135135
663198134803663235663273663358
66666
5871-00 8,08 270 135134704 6 345
5873-10R 7,92 270 135663310 6 344 5873-10R BIM 8,43 270 135547429 6 320
5873-03 BIM5873-06 BIM5873-08 BIM5873-10 BIM5873-12 BIM
320315315315312
270270270270270
8,43 8,43 8,43 8,43 8,43
135135135135135
547320547368547382547405547443
66666
5871-00 BIM 8,27 270 135547344 6 320
5875-10 10,95 480 135663396 6 600
8,76
8,76
8,76
8,76
5875-10R 10,95 480 135663433 6 610
5874-10R BIM INOX 400 280 120624588 6 5874-06 BIM INOX 5874-08 BIM INOX 5874-10 BIM INOX
400400400
280280280
120120120
624526624540624564
666
5898 A 8,02 250 110445855 6 240
5898 C 8,93 250 110446388 6 575
5898 B 10,01 250 110445985 6 305
94 95
g A mm
Plasterer’s trowel 5877 REF. £ B mm REF. g A mm£ B mm
Flooring spatula REF. £ A mm B mm MgREF. £ A mm B mmg
REF. g A mm£ B mm C mm M REF. g A mm£ B mm C mm M
Professional knee pad REF £
Professional Tiling Bucket REF. £ A mm B mm C mmg
Plasterer’s trowel with crenellated tooth blade.The last two digits in the reference number state the tooth size in mm.
Spatula 5897
Special spatula for joints, wooden handle.
Tiling spatulas
Squeegees
TILING
Benefits:• Long-lasting, withstands wear and tear.Characteristics:• Top quality steel combing spatulas.• Top quality rubber squeegee.• Very flexible, EVA band tiling spatulas.• User-friendly, light wooden handles.Uses:• Combing spatulas: To apply and evenly spread cement mortar on tiles.• Squeegees: To fill in joints with grout and also to remove any excess when it is dry.• Tiling spatula: To fill in joints with grout.
BU
ILD
ING
For general adjustment work.Black rubber head hammer with beech wood handle.
Mallet 8053 Mallet 8054
Special non surface marking.White rubber head hammer with beech wood handle.
Rubber mallets
Advantages:• With an excellent bounce that guarantees accuracy and comfort when tapping the tiles into place,
as well as the protection of the ceramic material used in the job.• Makes the positioning and the fitting of the ceramic tiles much easier.• Maximum resistance and durability. • Available with an ergonomic wooden handle.Features:• Top quality and high resistance isoprene rubber.• Mixed shape head; flat and spherical, in compliance with DIN 5128 standard.• Odourless, no crystallization.• User-friendly, light beech wood handle, PEFC certified.Uses:• In general, used for tapping things into place.• Especially, tiling jobs, to adjust the position of the ceramic tiles when they are being laid.
TILING
Knee PadsTILING
Professional Tiling BucketTILING
BP comes in a Box-Pallet.
Advantages:• High abrasion resistance and durability.• Maximum comfort and adaptability for users.• Prevents chaffing and grazing when the user’s knees come into contact with hard surfaces and thanks to
the grooved design backing, it is also non-slip.• Makes tiling fast and easy.Features:• High abrasion resistance and durability.• Maximum comfort and adaptability for users.• Prevents chaffing and grazing when the user’s knees come into contact with hard surfaces and thanks to
the grooved design backing, it is also non-slip.• Makes tiling fast and easy.Uses:• To use when working on the floor.
Advantages:• Excellent wringing capacity.• Professional use.• Long-lasting.• Easy to use and move around.Features:• 3 wringer rollers and a grate at the bottom.• Sloped base so that all the sediment from cleaning settles at the bottom.• Maximum capacity of 20 litres.• Very strong plastic bucket.• Wheels and handles to move around.Uses:• Tile cleaning jobs.
5877-035877-065877-08
140140140
200200200
3,02 3,02 3,02
131131131
134605134780134865
121212
5897-65897-85897-10
707070
68
10
4,23 4,27 4,49
290290290
134285134889134957
666
5886W-205886W-30
2,543,40
200300
8585
629286629040
1212
120120
5886F-455886F-60
2,933,88
450600
105105
M952LM952L
629064629088
1212
240310
8053-2508053-5008053-750
250500750
320340380
6,00 7,59
9,88
100125140
607585
M 8053-250M 8053-500M 8053-750
598179598193598216
666
8054-2508054-5008054-750
250500750
320340380
6,26 7,98
10,35
100125140
607585
M 8053-250M 8053-500M 8053-750
598230598254598278
666
72805 12,90 281941 1
5800-35800-3 BP
24,69
22,24
560560
290290
285285
631081631104
18
18001800
96 97
REF.
REF.
REF.
REF.
Simple Sponge REF. £
£
£
£
£
Extra Absorbent Simple Sponge REF. £A mm
A mm
A mm
A mm
A mm
A mmB mm
B mm
B mm
B mm
B mm
B mmC mm
C mm
C mm
C mm
C mm
C mmg
g
g
g
g
g
Tiling trowel 5888 REF. £ A mm B mmg
g A mm
Hacksaw 4621 REF. £ B mm REF. g A mm£ B mm
g A mm
Bimetal blade HSS 4601 REF. £ B mm g A mm
Rigid blade HSS 4602 REF. £ B mm
g A mm
Flexible blade 4604 REF. £ B mm
A
B
A
A sponge with netting for a better and easier clean-up.
Sponge Trowels
Advantages:• Ergonomic and light. Maximum durability, no wear and tear.Features:• Sponge with reticulated sections to make cleaning jobs easier and more effective.• Top quality shock-resistant polystyrene base.• Well-studied handle defined according to the user’s needs for a great grip.Uses:• Finishing and cleaning jobs.
TILING
Sponges
Advantages:• Very strong and long-lasting.• Great for cleaning and removing dirt.Features:• Maximum water absorption capacity.• Product range comes with longitudinal sections for faster and easier cleaning.Uses:• Cleaning jobs.
TILING
Average absorption capacity and durability. Average absorption capacity and durability.With longitudinal sections for greater absorption and removal of dirt.
Average absorption capacity and high durability.Abrasive polyester layer for better surface cleaning.
High absorption capacity and high durability.Stays wet longer, makes work easier.
Average absorption capacity and high durability.Abrasive polyester layer for better surface cleaning. With longitudinal sections for greater absorption and removal of dirt.
High absorption capacity and high durability.Stays wet longer, makes work easier. With longitudinal sections for greater absorption and removal of dirt.
Mixed Sponge
Cloud Sponge
Extra Absorbent Mixed Sponge
Extra Absorbent Cloud Sponge
Hacksaws and blades
Advantages:• Strong and lightweight.• Comfortable sawing.• Optimal finishes.Features:• Hacksaw with increased height of the solid blade and aluminium support.• High sawing capacity.• Includes blade, ref. 4604-12.24, with 24 teeth.• Polypropylene or aluminium handles.Uses:• For cutting frames, steel, aluminium, stainless steel, PVC, etc. and various sawing jobs.
Professional solid plate (5 mm).
Hacksaw 4630
Aluminium: strong and light. Option for mounting the bladeat 55° for burr.
For professional use. Bimetal: rapid M2 steel edge. Flexible. For professional use for mechanics form works.HSS: rapid M2 steel blade. Rigid.
DIY use: soft steels, nonferrous metals and plastics.DIY: alloy steel blade. Flexible.
CARPENTRY
BU
ILD
ING
CS12187S
CS12187MX
CSW12187
CS12187MXE
CSW12187E
CS12187E 1,15
1,90
1,98
2,48
2,31
1,57120
120
120
120
120
120180
180
180
180
180
18070
70
70
70
70
70632095
632132
632170
632156
632194
63211825
25
25
25
25
2540
40
40
40
40
40
5888 6,21 280 160135138 6 255
4601-12.184601-12.244601-12.24 BS
202041
300300300
1,45 1,45 3,93
182424
923445405026206074
10010012
4602-12.184602-12.244602 12.24 BS
202041
300300300
1,34 1,34 3,71
182424
923483406177206166
10010012
4604-12.184604-12.244604-12.24 BS
202041
300300300
0,64 0,64 2,15
182424
923520405118206258
10010012
4621-12 520 4708,07 90404869 12 4630-12 560 40014,24 104404883 6
98 99
REF. g A mm£ TPI REF. g A mm£ TPI
REF. g A mm£ TPIREF. g A mm£ TPI
REF. REF.
REF.
g g
g
A mm A mm
A mm
£ £
£
TPI TPI
TPI
A
REF. g A mm£ B mm REF. g A mm£ B mm
REF. g A mm£ B mm
g A mm£ B mmREF.
A
B
Saws
Advantages:• High resistance and minimal tooth wear.• Excellent performance and accuracy.• Very easy to cut.• Available in wood handle and bimaterial handle, maximum comfort.Features:• High carbon content steel blade.• Blade fully heat treated with double quenching on the teeth.• Three edge toothing.• Long lasting sharpening.• Ergonomic handle, designed to transmit maximum strength along the tooth.Uses:• For cutting wood, particle boards and other materials.
TPI: Teeth per inch.
Carpentry saw with wooden handle.
Saw 4551
Carpentry saw with bimaterial handle.
Saw 4555
Backsaw with bimaterial handle.Rib in the upper section of cutting blade guaranteeing rigidity while sawing.
Backsaw 4565Backsaw 4561
Backsaw with wooden handle.Rib in the upper section of cutting blade guaranteeing rigidity while sawing.
Keyhole saw with wooden handle. For use in areas with difficult access.
Saw 4572
CARPENTRY
Woodwork saw with an angled wooden handle for a bevelled cut.
Woodwork saw with wooden handle.
Saw 4568
Saw 4568
Wood chisels and gouges
Advantages:• Effective soaring and fast working. Ergonomic handle.• Long-lasting and strong tools (high wear resistant).• Wide range for all working situations.Features:• Accurate blade heat treatment for long life. Protection of blade point.• Varnished blades to prevent rust.• Chrome-Vanadium steel blades re-sharpenable along their entire length. Perfectly straightened and turned blades.• Square key section preventing the blade from turning in the handle.• Sleeved using a pneumatic press guaranteeing the correct blade-key joint.Uses:• For sizing, adjustments and finishing work on wood.
Wooden handle. Bevelled blade.
Chisel 4651
Bimaterial handle. Bevelled blade.
Chisel 4655
Wooden handle.
Gouge 4653
6-10-16-20-26 Wooden handled chisel6-10-16-20-26 Dual material handled chisel
Chisel Kits
8910 8912
CARPENTRY
BU
ILD
ING
4551-144551-164551-194551-22
400435485535
350400475550
13,51 14,44 16,58 18,40
7777
300901301007360899301304
6666
4555-144555-164555-194555-22
360395445495
350400475550
11,41 12,00 13,86 15,61
7777
313611313628447194313659
6666
4565-124565-14
396450
300350
15,76 17,01
1010
313734313741
66
4561-124561-14
484500
300350
17,67 18,91
1010
302707302806
66
4572-104572-12
4568-S
4568-L
156170
160
210
250300
250
250
9,51 9,98
8,97
8,97
77
13
13
303001303100
623345
624328
66
6
6
4651-44651-64651-84651-104651-124651-144651-164651-184651-204651-224651-244651-264651-284651-304651-324651-354651-40
118124128144146161163176203205211223227230235261340
468
1012141618202224262830323540
8,46 8,54
8,70 8,97 9,32 9,63 9,75 10,06 10,48 11,07 11,65
12,15 12,50 12,85 13,71 14,56 15,53
9999
102102102108108115115115122122122122122128128
417234417272415032417357417449417487417524417562417609417647417685417722417760417807417845036350039221
66666666666666666
4655-44655-64655-84655-104655-124655-144655-164655-184655-204655-224655-244655-264655-284655-304655-324655-354655-40
101107118121125142144167174179205209226232251280318
468
1012141618202224262830323540
10,06
10,17 10,60 10,75 11,03 11,61 11,80 11,88 13,36 13,98 14,83 15,30 15,80 16,31 17,39 18,68 19,92
9999
102102102108108115115115122122122122122128128
198126198461198522198621198676198720198775199444198867198942198997199055199109199178199246199314199376
66666666666666666
4653-84653-104653-124653-154653-184653-204653-224653-25
90100110145175180185195
810121518202225
14,15 14,49 15,39 16,91 18,33 19,50 20,57 21,85
110115115120125125125130
039863039610039641039689039719039740039771039801
66666666
1.4001.775
330330
73,04 82,35
230230
429879197044
44
89108912
100 101
REF. g A mm£ B mm D mmC mmREF. g A mm£ B mm D mmC mm
g A mm
Clamp 51215 and 51225 REF. £ B mm D mmC mmg A mm
Clamp 51210 and 51220 REF. £ B mm D mmC mm
B
A
D
C
A
BC
REF. g A mm£ B mm C mm REF. g A mm£ B mm C mm
REF. g A mm£ B mm C mm g A mm
Replacement blades REF. £ B mm C mm
REF. g A mm£ B mm C mm g A mm
Replacement blades REF. £ B mm C mm
g A mm
19 mm METAL cutter REF. £ B mm C mm g A mm
Replacement blades REF. £ B mm C mm
25 mm
0,7
Features:• Nodular cast steel heads.• Calibrated steel toothed wheel.• Anti-slip brake on the moving head.• Flat surface mounting.• Wooden or iron handle.Uses:• For holding, gripping and mounting different parts / profiles.
Clamp 51201
Iron handle. Spindle cross threads.
Clamp 51200
Wooden handle. Spindle threads.
Iron handle. Spindle cross threads.Wooden handle. Spindle threads.
C Clamps CARPENTRY
Advantages:• Professional, continuous use.• Long life.• Ergonomics.Features:• High-quality, toughened carbon steel knives housed in the cutter guide.• Rapid blade change without needing to open the cutter.• Option for locking the point using a wheel: ref. 51404 and 51406.• Stainless steel guides guaranteeing the perfect sliding of the knife.• Packed in an individual blister pack.Uses:• Cutting drywall.
Cutters and knives
Equipped with eight 18 mm blades housed in the guide.Bimaterial, plastic and elastomer housing.
18 mm dual material cutter
They come in blister packs of 10 blades and are served in boxes containing10 blisters.
Replacement blades
Equipped with one 25 mm blade. Easy cutting on any type of plate.External wheel for rapid locking.Bimaterial, plastic and elastomer housing.
25 mm dual material cutter
They come in blister packs of 10 blades and are served in boxes containing10 blisters.
Equipped with five TITANIUM 18 mm blades housed in the guide.Last 8 TIMES LONGER than other blades.Anti-return guide rail. Bimaterial, aluminium and elastomer housing.
18 mm TITANIUM cutter
They come in blister packs of 5 blades and are served in boxes containing10 blisters.
Equipped with trapezium blade. Rapid blade change using external wheel. Compact and watertight bimaterial, ZINC alloy and eleastomer housing.
They come in blister packs of 10 blades and are served in boxes containing10 blisters.
DRYWALL
BU
ILD
ING
51215-3051215-4051215-5051215-6051215-8051225-3551225-4051225-5051225-6051225-8051225-100
1.5201.7001.9202.0602.5002.2202.3302.5502.7703.2103.650
3030303030353535353535
15,01 16,95 18,46 20,19 22,86 17,17 17,99 19,41 20,92 23,94 26,92
88888888888
300400500600800350400500600800
1.000
9090909090
120120120120120120
216561216639216691216752216813217490217568217636217698217766217834
11111111111
51210-2551210-3051210-4051210-5051210-6051210-8051220-6051220-12051220-150
1.4001.4801.6601.8502.0402.4202.6804.0004.660
303030303030353535
13,93 14,80 16,70 18,38 19,93 22,78 20,75 29,72 34,21
888888888
250300400500600800600
1.2001.500
909090909090
120120120
215960216035216097216165216233216295217094217292217360
111111111
51201-1551201-2051201-2551201-30
500540590630
18181818
7,55
7,98
8,63
9,06
7777
150200250300
70707070
215564215632215694215755
1111
51200-1551200-2051200-2551200-30
500540590630
18181818
7,55
7,98
8,63
9,06
7777
150200250300
70707070
215236215298215366215434
1111
51404-18 170 1575,87 52 22561487 12
51405-25 130 1767,16 46 21561531 12
51406-18 190 171 9,40 44 18561555 12
51407 130 1584,57 36 22561579 12
H51404-18 7 108 2,67 18 0,5561593 10
H51407 4 60 2,49 19 0,6562538 10
H51406-18 7 1103,93 18 0,5561654 10
H51405-25 16 140 3,54 25 0,7561630 10
102 103
g
4521. Keyhole saw REF. £ A mm B mm REF. g£ A mm B mm
g A mm
4107-140. 140 mm Surface forming file REF. £ B mm REF. g A mm£ B mm
g A mm
4107-260. 260 mm Surface forming file REF. £ B mm REF. £ g A mm B mm
A
B
g A mm
6006-S Straight cut snips REF. £ B mm REF. £ g A mm B mm
REF. £ g A mm B mm
A
B
g A mm
6007-1 One-handed Stud crimper REF. £ B mm g A mm
6007-2 Two-handed Stud crimper REF. £ B mm
A
B
Saws
Advantages:• Rapid, clean and accurate cutting with perfect blade sliding action.• Long life, highly resistant to abrasion and plaster corrosion.• Ergonomic handles.Features:• Blade fully heat treated. Covered with anticorrosion particles.• Keyhole saw with double edged teeth and saws with triple edged teeth with double toughening in critical
teeth wear areas.• Bi-material handles.Uses:• Cutting drywall.
Sharpened point with a 1.8 mm blade thickness.
4520. Saw
Pointed blade end facilitating soaring in ceiling-wall locations.Handle with angle indicator (45/90°).
Surface forming file
Advantages:• Long life.• Rapid and fine finish.Features:• Toughened carbon blue steel blade.• 4.6 mm blade edge pass.Uses:• Grinding or adjusting the cut on drywall.
One-handed use.
H4107-140. 140 mm Surface forming file replacement blade
Replacement blades are supplied in a 2 unit pack and come in boxes of 10 packs.
Two-handed use.
H4107-260. 260 mm Surface forming file replacement blade
Replacement blades are supplied in a 2 unit pack and come in boxes of 10 packs.
DRYWALL
DRYWALL
Aviation snips
Advantages:• Less cutting force for the user, up to 30% less.• 1.25 mm cutting capacity.• Long life.• Ergonomic handles, very strong, fits into the user’s hand.Features:• Forged blades, sharpened edges with high leverage effect.• High-quality Chrome Molybdenum toughened blue steel snips.• Toughened blue steel bolt with perfect setting between the two blades.• Ergonomic handles, developed in copolymer materials with an optimal 140 mm opening.• Complies with US standards. ASMEB107.16.1998.Uses:• Cutting patterns and frames and other materials (aluminium, PVC).
Straight and curved cutting to the right and left.Especially recommend for straight cuts.
6006-L Left cut snips
Straight cuts and specially recommended for left curved cuts.
6006-R Right cut snips
Straight cuts and specially recommended for right curved cuts.
DRYWALL
Stud crimper
Advantages:• Long life.• Excellent mounting, solid and long lasting punch.• High perforating capacity.• Ergonomics.Features:• High quality toughened alloy steel punch.• High leverage effect.• Bi-material, ABS and elastomer handles.Uses:• Ideal for joing metal stood to metal track.
One-handed use with an opening spring.Drilling capacity: 0.8 mm + 0.8 mm.
Two-handed use.Drilling capacity: 1 mm + 1 mm.
DRYWALL
BU
ILD
ING
4521 22511,56 313 3,5199093 6 4520-154520-20
375465
15,49
17,17
380500
3,73,7
561449561463
66
4107-140 168 1408,20 42561340 6
4107-260 375 26013,72 42561364 6
H4107-140 50 1403,93 42563573 10
H4107-260 80 2604,49 42563603 10
6006-S 415 25013,80 75561388 6
6006-R 415 24513,80 75561401 6
6006-L 415 24513,80 75561425 6
6007-1 675 27067,94 84564563 3 6007-2 910 34073,16 67564587 3
104 105
g A mm
Joint knife 5894-150 N REF. £ B mm g A mm
Joint knife 5894-150P N REF. £ B mm
A
B
REF.REF. gg A mmA mm ££ B mmB mm
REF. g A mm£ B mm g A mm
Joint knife 5896 R REF. £ B mm
g A mm
Joint knife 5896-180 REF. £ B mm
g A mm
50272 Drywall hand sander REF. £ B mm g A mm
50273 Fiber screen sander REF. £ B mm
AB
REF. g A mm£ B mm
g A mm
Drywall foot lift 50276 REF. £ B mm
REF. g A mm£ B mm
A
B
g A mm
Drywall lifter 50277 REF. £ B mm
Joint knives
Advantages:• Long-lasting and damage free.• Highly flexible.• For finishing joints without lines or marks.• Available in wooden handles and bimaterial handles:- Very light and pleasant to touch an ergonomic beech handle.- Bimaterial ergonomic handles manufactured from very light and easy to clean polypropylene and elastomer.Features:• High-quality stainless steel.• Rounded blades with a 90o angle, perfectly straight, aligned and polished.• Excellent blade handle joint using injection or rivets.Uses:• Sealing and finishing drywall joints.
Stainless-steel, bi-material handle joint knife for finishing joints. Includes PH2 bit.
DRYWALL
Taping knife for finishing joints.Taping knife for finishing joints.
Joint knife 5895
Outside corner joint knife.
Joint knife 5896 E
Inside corner joint knife.
Blue carbon steel to prevent rust. Very light.
Drywall hand sander
Advantages:• Quick change clamp. Rapid smoothing with a good finishing.• Light and strong.• Ergonomics.Features:• Rubber based.• Handle designed to match the use and the user.Uses:• Smoothing joints.
Supplied in packets of 10 sanders and come in boxes of 5 packets.
51320 Tool belt
Accessories
50271 Mud pan
• Selected high-strength stainless steel.• Welded seam joints.• Polished finish.
• High quality carbon steel.• Designed to lift boards at the same time as they are easily screwed into the frames saving the distance required so that they do not touch the floor.
• Made of high quality leather with heavy duty rivets. • Nylon belt with reinforced holes and metal buckle.• 5 pockets for holding different types of screws and rivets. Special pocket for holding scissors made of reinforced leather.
• Manufactured in epoxy painted steel.• Telescopic and folding arms to install boards at heights up to 3.50 m.• Lifting by anti-return handle.• Maximum arms opening distance of 2.70 m and highest permitted load
of 65 kg.• 360o swivel head with locking system.• Three wheels, two fitted with brakes.
DRYWALL
DRYWALL
BU
ILD
ING
Range of accessories for plasterboard installers.
Joint knife 5900
5894-150 N 110 1507,70 235635225 6 5894-150P N 120 1507,78 257635249 6
5895-2005895-2505895-300
5900-1405900-1605900-1805900-200
215240265
110120130140
200250300
140160180200
7,07 8,02
8,50
3,48 3,65
3,83
4,03
250 250250
256256256256
564440564464564488
635263635287635300635324
666
6666
5896-E 225 10011,35 275564525 6 5896-R 225 10011,35 275564549 6
5896-180 255 18013,76 475561326 6
50272 340 23013,72 80564624 2 50273 100 28010,48 105565195 5
51320 600 25029,21 300561678 3
50276 860 33030,33 133564662 2
50271 560 35515,23 90564600 2
50277 38.000 3.500764,52 2.700564686 1
106 107
REF. g A mm£ B mm REF. g A mm£ B mm
REF. g A mm£ B mm REF. g A mm£ B mm
REF. g A mm£ B mm
A
B
REF. g A mm£ B mm REF. g A mm£ B mm
REF. g A mm£ B mm
Advantages:• Highly accurate levelling.• High strength profile and vials.• Shock protection.• For professional use.Features:• Vial accuracy +/- 0.5 mm/m. • Milled surfaces, greater precision.• Reinforced tubular profile.• Shock absorbing rubber end caps.• Impact resistant vials and UV ray resistant. 15 year guarantee.Uses:• Levellings jobs.
Box levels
Tubular level with 2 vials, vertical and horizontal.
Level 50101
Level 50101 with strong ferrite magnets, up to 4 magnets in lengths longer than 60 cm.
Level 50101 M
Extra wide ridge with reinforced handles for greater comfort. Machined surfaced sides, greater precision in both positions. 3 vials, vertical and horizontal, in all sizes.
Level 50107
Level 50107 with ultra strong neodymium magnets, up to 4 magnets in lengths longer than 80 cm.
Level 50107 M
V ridge for easy reading in pipes and similar places. Magnetic base. Precision +/- 1 mm/m.
Level 50109
MEASUREMENT, MARKING AND LEVELLING
BU
ILD
ING
Advantages:• Highly accurate levelling.• High strength profile and vials.• For professional use.Features:• Vial accuracy +/- 0.5 mm/m. • Milled surfaces, greater precision.• Aluminium cast profile.• Impact resistant vials and UV ray resistant. 15 year guarantee.Uses:• Levellings jobs.
Cast levels
Level in the shape of an airplane wing. 2 vials, vertical and horizontal.
Level 50102
Level 50102 with ultra strong neodymium magnets.
Level 50106
Level in a double T-shape with handle for greater convenience. Machined surfaced sides, greater precision in both positions. 3 vials, vertical and horizontal.
Level 50103
MEASUREMENT, MARKING AND LEVELLING
TORPEDO LEVEL
50101-3050101-4050101-5050101-6050101-8050101-10050101-12050101-15050101-18050101-200
175 235 295 350 470 585 700 875
1.050 1.165
300 400 500 600 800
1.000 1.200 1.500 1.800 2.000
10,66 11,69
12,81 13,89 15,62 17,82
21,22 25,24 30,03
34,08
50 50 50 50 50 50 50 50 50 50
600346600353600360600377600384600391611502611526611540611564
5555555111
50101M-3050101M-4050101M-5050101M-6050101M-8050101M-10050101M-120
175 235 295 350 470 585 700
300 400 500 600 800
1.000 1.200
13,33 14,62 16,05
17,39 20,32 23,17 27,57
50 50 50 50 50 50 50
611588611601611625611649611663611687611700
5555555
50109-9 90 2304,96 38324594 10
50107-4050107-6050107-8050107-10050107-120
400 600 800
1.000 1.200
400 600 800
1.000 1.200
18,64 24,33
26,44 29,81 31,41
60 60 60 60 60
611724503760503821611779611793
55555
50107M-4050107M-6050107M-8050107M-10050107M-120
400 600 800
1.000 1.200
400 600 800
1.000 1.200
25,19 32,87 35,72 43,23 45,56
60 60 60 60 60
611816611830611854611878611892
55555
50102-4050102-5050102-6050102-80
380 440 495 770
400 500 600 800
17,26 18,67 20,85 24,92
42 42 42 42
600407600414600421600438
5555
50106-60 495 600 32,89 42 564976 5
50103-40 50103-6050103-8050103-100
550 760 980
1.310
400600800
1.000
25,25 25,85 30,99
50,46
5050 5050
942644942705942736632293
5555
108 109
g A mm B mm g A mm
Magnetic square 50251 REF. £ B mm
A
B
g A mm
Chalk lines 50220 REF. £ B mm g A mm
Chalk lines 50221 REF. £ B mm
g A mm
Chalk lines kit 50222 REF. £ B mm g A mm
Chalk lines kit 50223 REF. £ B mm
g A mm
Chalk powder 50230/50231 REF. £ B mm g A mm
Chalk powder 50232/50233 REF. £ B mm
A
B
REF. g A mm£ B mm REF. g A mm£ B mm
A
B
Diabolo with ultra strong neodymium magnet.
MEASUREMENT, MARKING AND LEVELLING
Plumb bob and magnetic squares
Advantages:• Long life.• Professional use.Features:• Plumb, screw and plate made of galvanized steel to prevent rust.• All plumbs come with a leaded wood diabolo.• Very resistant 5m nylon string.• Packaging in a plastic box. The product can be stored after use.Uses:• Plumb bob: To check and align vertical elements on building sites, such as walls and pillars.• Square: For aligning bricks during bricklaying, making the builders work easier.
Anodized aluminium squares with powerful neodymium magnets.Contains 15m of nylon string.
BU
ILD
ING
Advantages:• Long life without deterioration.• Easy to use.• For professional use.Features:• Very resistant and compact aluminium or polypropylene box.• Ergonomic shape for better grip.• Fast and easy filling device, does not require opening or closing (ref. 50221).• 30 m string with high tracing powder retention.• Steel hook, easy to fix on different surfaces.Uses:• For marking jobs.
Chalk lines and chalk powder
Aluminium box. Complete powder visibility via the semi-transparent case, to see when it needs filling.50221-2 Double box.
Plastic chalk line kit 50221 with blue chalk powder 113 gr. Metallic chalk line kit 50220 with blue chalk powder 113 gr.
Easy to apply BLUE chalk powder. Easy to apply RED chalk powder.
MEASUREMENT, MARKING AND LEVELLING
MEASUREMENT, MARKING AND LEVELLING
Advantages:• Resistant and durable.• Maximum precision.Features:• Steel square lacquered in yellow, with a reinforced aluminium heel.• Stainless steel square, with a reinforced aluminium heel.Uses:For measuring and marking jobs.
Squares
Steel square, lacquered in yellow with anodised aluminium tip.
Square 50210
Stainless steel square, with anodised aluminium tip.
Square 50215
Plumb bob 50250 REF. £
50250-20050250-50050250-70050250M-20050250M-50050250M-700
200 500 700200 500 700
25 34 34 25 34 34
7,51 9,58 10,83
11,73
14,02
15,40
63 82 111 63 82 111
057683069532069570613452613476613490
444444
50251 100 4013,33 25612851 4
50220 230 76 9,10 128040104 6
50222 370 188 9,88 249040081 6 50223 430 18810,40 249046106 6
5022150221-2
160160
8181
8,58
13,05
140140
040128622768
66
5023050231
500 1.000
80 122
4,92
8,84
222 280
040043040067
66
50232 500 80 4,92 222 613391 6
50210-20050210-25050210-30050210-400
200230280350
200250300400
13,07 14,41 15,66 16,91
115135165165
040265040296040326040357
6666
50215-20050215-25050215-30050215-400
200230280350
200250300400
15,31 16,87 18,42 19,93
115135165165
040142040173040203040234
6666
110 111
AB
REF. g A mm£ B mm REF. g A mm£ B mm
REF. g A mm£ B mm REF. g A mm£ B mm
REF. g A mm£ B mm
g A m
Tape measure 50011 REF. £ B mm g A m
Tape measure 50011 M REF. £ B mm
g A m
Tape measure 50012 M REF. £ B mmg A m
Tape measure 50012 REF. £ B mm
g A m
Tape measure 50013 REF. £ B mm
3m
A
B
*****
*
**
**
**
**
**
**
** **
**
***
*** *** ***
***
*** ***
***
*
*
*
**
* *
*
*
*
*
Advantages:• For professional use.• Excellent marking and durability.• Specialised pencils developed according to use.Features:• High-quality graphite leads.• Lead thickness from 4 mm to 7.5 mm.Uses:• Marking jobs.
Pencils
Carpentry pencil for use on dry wood.Supplied as a single unit / 50 unit boxes.
Pencil 50240
Special stone pencil.Supplied as a single unit / 50 unit boxes.
Pencil 50241
For universal all-purpose use.Supplied as a single unit / 50 unit boxes.
Pencil 50243
Special wet surface pencil, weather resistant marking.Supplied as a single unit / 50 unit boxes.
Pencil 50244
Duo, for universal use, special corrections.Supplied in packs of three units / 20 pack boxes.
Pencil 50245
Bellota range pencils50240
50241
50243
50244
50245
Carpentry
Stone
Universal
Wet surfaces
Duo
Dry wood Wetwood
StoneConcrete Metal Ceramics Plastic Glass
MEASUREMENT, MARKING AND LEVELLING
BU
ILD
ING
Advantages:• Long life and maximum resistance. High torsion-resistance.• Housing highly resistant to impacts and ergonomic design for an improved grip and handling.• Easy to use. For professional use.Features:• Steel tape covered in a matt varnish or in nylon, maximum durability and easier to read tape.• A highly resistant pointed hook with several rivets, depending on product.• Tape retracting absorption, to keep the hook from being damaged. • Clip to fasten the tape to a belt.• Label with a space for identification and personalisation.• Provided with a theft-protection plastic hanger, with the exception of references 50011 and 50011M which
come with a display case for the counter and/or display shelving.Uses:• For measuring jobs.
Short tapes
Pointed hook with 2 rivets. Plastic and rubber case, highly resistant to impacts. An ergonomic design for an improved grip and handling
Magnetic tip with two ferrite magnets.
A magnet tip with two ferrite magnets with an anti-slip rubber coating, for maximum durability and not losing it.
25 mm wide tape. Marked on both sides of the tape. A hook with 3 extra-grip rivets, usable on both sides. Lower tape block button. Chromed case with compact design.
33 mm wide tape. Up to 3 meters without bending. Hook with 5 extra-grip rivets. Bi-material stainless steel case, slip-proof and extremely impact-resistant.
MEASUREMENT, MARKING AND LEVELLING
Optimal performance Excellent performance Good performance Non permanent
50240 14 2401,41 13044744 50
50244 10 1751,29 8044775 50
50245-3 12 1755,82 10565652 20
50243 20 2403,71 12,4044768 50
50241 14 2401,49 13044782 50
50011-350011-550011-8
120 200 400
3 5 8
3,02 3,88 6,47
16 19 25
618204618228618242
241812
50013-5 BL50013-8 BL
340500
58
11,65
13,63
3333
618341618365
66
50011M-5 200 54,31 19618266 18
50012M-5 BL 250 58,37 25618303 650012-5 BL50012-8 BL
250450
58
7,51
10,91
2525
618280618327
66
112 113
g A m
Measuring tape 50021 REF. £ B mm g A m
Measuring tape 50022 REF. £ B mm
g A m
Measuring tape 50023 REF. £ B mm
A
B REF. A mmg£ B mm ml REF. A mmg£ B mm ml
REF. A mmg£ B mm ml
B
A
0
Advantages:• Long life and maximum and resistance.• Housing highly resistant to impacts and ergonomic design for an improved grip and handling.• Easy to use.• For professional use.Features:• Marked with a millimetre scale.• 50021/50022: fibreglass tape, very resistant, flexible and washable.• 50023: Carbon steel tape covered in nylon, maximum durability and easier to read tape.• Folding steel hook, easy to fix on different surfaces.Uses:• For measuring jobs.
Long tapes
24 read fibreglass tape. Marked on both sides of the tape. Compact plastic and anti-slip case. With a back handle in 30 and 50 m.
40 thread fibreglass tape, very resistant. Marked on both sides of the tape. Very resistant ABS material open case with Bi-material ergonomic grip area. Fast retracting system, multiplied by three.
Carbon steel tape. High precision range, class II. Case compact and anti-impact steel and covered with leather. Folding steel hook, easy to fix on different surfaces.
MEASUREMENT, MARKING AND LEVELLING
BU
ILD
ING
Caulking guns
Advantages:• Easy sealing in any position.• Extruding the product with minimum force.• Gentle and long-lasting forward movement.Features:• Friction propelled guns.• Force/effort ratio multiplier by 1:7 in semi-professional guns (50261) and 1:12 in professional guns
(50262 and 50263).• Manufactured in aluminium with zinc or epoxy paint finish.Uses:• Guns for sealants in cartridges or bags of 300 ml and 600 ml.
Gun 50261
Semi-professional tubular gun for 300 ml bags of cement, mortar or putty. May also be used with cartridges by removing the plastic pusher.
Gun 50262
Professional gun for 300 ml cartridges of silicon and polyurethaneputty.
Gun 50263
Professional tubular gun for 300 or 600 ml bags of cement, mortar or putty.May also be used with cartridges by removing the plastic pusher.Zinc plated finish for improved sliding of material.
ACCESSORIES
50021-1050021-2050021-3050021-50
180 300 420 670
10 20 30 50
7,29
9,49 12,29 16,00
13 13 13 13
447040618068618082618105
6666
50023-2050023-30
400 480
2030
18,16
22,73
9,59,5
618167618181
66
50022-3050022-50
970 1.310
3050
20,02 26,27
1919
618129618143
22
50261 3807256,69 55,5 300342208 1 50262 3507404,87 56 300342239 12
50263-30050263-600
380520
8351.000
20,88 40,08
5454
300600
342253342260
11