building construction design - Amazon Web Services · ing utilises research and strategy as the...

August/September 2019

Appointments & NewsBuilding Products

InteriorsExteriors

02060610

buildingconstructiondesignwww.buildingconstructiondesign.co.uk

Cover image: RMIGSee page 11 for details

BCD0809_2019 Flatplan_Layout 1 21/08/2019 10:18 Page 1

www.buildingconstructiondesign.co.uk2

Appointments & News

Delta Membrane Systems Limited is delighted to announce Dualproofhas been certified by KIWA

(European Institution for Testing, Inspectionand Certification). The BDA Agrément® process is designed

to underpin the ‘fitness for purpose’ ofproducts destined for the European construction market. Products are examinedand rigorously tested following precise installation instructions. It is one of the UK’s major authorities

recognised by building control, governmentdepartments, architects, local authorities,specifiers and industry insurers. DualProof is a Type A waterproofing pre-

applied, sealed two layer highly flexible PVCmembrane laminated with a nonwoven PP-fleece, composite waterproofing membranewhich forms a permanent mechanical bondwith freshly poured concrete preventing thetracking of water between the waterproofingmembrane and the concrete sub-structure. DualProof is a robust, flexible and

high-performance waterproof, damp proof,gas proof membrane and gives concrete protection against chemicals. Tough andresistant, quick and easy to install, highcompound with shear strength. DualProofcan be installed in every season, regardless of temperature and weather condition. Oneof the many advantages to DualProof is thatit prevents any lateral water migrationbetween the waterproofing membrane andthe structural concrete.

Quality assurancesThe BDA Agrément strengthens Delta’sDualProof brand. BDA Agréments are a markof excellence, ensuring products are safe, highquality, reliable and regulatory compliant.Products are examined and rigorously testedfollowing precise installation instructions.Agréments confirm the compliance anddurability of DualProof under the specifiedmethod of installation. The BDA Agrément®

process considers:

• European product standards, relevantcodes of practice and test reports

• Independently verified product characteristics

• Factory production control• Annual verification procedures• Points of attention for the specifier andspecific details

• Installation procedure• Compliance with Building Regulationsand any other required standards

• Boundaries of use (restriction togeographical scope)

• Validity

A visible sign of conformity is DualProof’s CEMark. The CE Mark denotes conformity thatDualProof satisfies European Laws relatingto European CEN Standards.

“Our approach to structural waterproof-ing utilises research and strategy as thefoundation to all design ideas and rationale.Every waterproofing, damp proofing, groundgas or flood resilience project is unique, butall start with one thing in common – therequirement of waterproofing design special-ists. The only way to solve a problem is tounderstand it from every angle. Luckily, we’vegot a proven process to quench our insatiablecuriosity. The BDA certification of Dualproofepitomises the quality in our approach tostructural waterproofing solutions.”

01992 523 523 www.deltamembranes.com

Delta Membrane Systems Limited expands its Waterproo ng Systems with BDA Certi ed DualProof


www.buildingconstructiondesign.co.uk 3

Appointments & News

For the prestigious redevelopmentproject at 21 Dartmouth Street, London, a premium occupant

experience was essential to complement the enviable location. The installation of aTROX air conditioning solution, includingTROX X-CUBE air handling units (AHUs),and X-AIRCONTROL modules, with the X-AIRCONTROL Zonemaster, is enablingthe building to achieve outstanding levels ofefficiency alongside elite levels of comfort.The 21 Dartmouth Street building is

situated in the heart of St. James's Park,between Buckingham Palace and the Palaceof Westminster, a short stroll from SloaneSquare's series of specialist boutiques. The address features a magnificent newrooftop, a majestic lobby and modernbusiness amenities befitting its architecturalgrandeur. A total of 53,000 sq ft of officespace is offered across nine floors, naturallycommanding an extremely high degree ofoccupant comfort.

When specifying the air conditioningsystem for the building, the main contractor,mac-group, and their M & E services consultants, Max Fordham, required asolution which would combine optimumcomfort conditions with outstanding environmental performance. The solution,provided by air conditioning specialistsTROX UK, incorporates precision-engineeredair handling units, and provides the latestVAV capability featuring advanced zonecontrol technology to deliver best-in-classenergy efficiency and occupant comfort.At the heart of the system are two

TROX X-CUBE air handling units. Each X-CUBE incorporates TROX’s integratedcontrols package, whereby damper actuators,pressure, temperature and humidity sensorsas well as heat recovery control and fan control strategy are linked into the X-CUBE digital control network. Both units incorporate thermal wheels with pre-programmed strategies, selected to meet

BVU efficiency in accordance of the ErP 2018standard. This is the highest level of smarttechnology, combining pre-set algorithms,developed by TROX, to facilitate rapidreactions to changes in building load.

01842 754545 www.troxuk.co.uk

TROX air conditioning solution perfect for London project

The village of Bramcote inNottinghamshire, has been a popular place for home owners with

discerning taste since Victorian times, so it’slittle wonder that is now attracting fresh interest for twenty first century living with the select Baxter Green development by William May. Envisioned by internationally recognised Leonard Design Architects and setin the former gardens of Grade II Listed St.Johns College, Baxter Green introduces

outstanding low-density luxury housingsurrounded by tranquil countryside. Oncecomplete Baxter Green will have 40 residential properties varying in sizes fromapartments to five-bedroom houses, withample sized living space and all fitted withVicaima quality interior doors.Long established and regional house

builder William May Developments have usedVicaima’s Dekordor 3D finished doorsthroughout, alternating within particularhouse types, between a textured grey face withhorizontal decorative grooves and a rich DarkCedar finish. Dekordor 3D adds a new dimension to

interior design, with highly attractive horizontal grained textured laminates in arange of on-trend and contemporary colourtones. This durable range can be furtherenhanced, with the addition of glass paneldoors, face grooving or even metallic inlays,to create individual statements for apartmentsor traditional homes. All of the Dekordor 3D

collection come in a choice of cores and can be supplied with added performance including fire doors which are compliant withthe most rigorous fire door regulations,acoustics and security doors where requiredas part of a complete door and door frame kit.

01793 532333 www.vicaima.com

Vicaima bring an added dimension to development



Appointments & News

UL, a global safety science leader,announces the acquisition of WintechTesting and Certification, a Telford,

U.K.-based firm that provides testing andcertification services to architects, buildingowners, manufacturers and others across the built environment community. Theacquisition strengthens UL’s expertise in thefield of building envelope evaluation, testingand certification, and offers greater access to global markets.

Wintech Testing and Certification is aprivately-owned firm that offers testing andcertification services to the building envelopemarket. Wintech Testing and Certification’sunique laboratory facilities are among thelargest in the U.K. and are accredited by theUnited Kingdom Accreditation Service(UKAS). Wintech Testing and Certificationalso holds accreditation from UKAS as acertification body operating several schemesinvolving certification of windows, doors,curtain walls, and rainscreen cladding. Overthe last twenty-five years, Wintech Testingand Certification has contributed to manyhigh-caliber projects throughout the UnitedKingdom and Europe.

“UL and Wintech Testing and Certificationhave a shared mission and complementarybusinesses. We are relied upon by the buildingmaterials community for the services andknowledge that they need to enhance publicsafety, meet regulatory demands, protectbrand value and successfully access the globalmarket,” said Kevin Faltin, vice president ofUL Building and Life Safety Technologiesdivision. “Working as one, UL and WintechTesting and Certification will continue togrow the vision that has brought us together,that of becoming a global leader in the field of building envelope evaluation, testing and certification.’’

Wintech Testing and Certification’semployees will join and strengthen UL’sexisting building envelope team. The group’sbuilding science thought leadership andglobal center of excellence will be based outof the Telford, U.K. headquarters.

“We are excited by this opportunity to joinforces with UL and provide best-in-classservices to the building envelope community,”said Gailord Nepp, former managing director of Wintech Testing and Certification and now European business development

manager - Building Envelope Services for UL.“Our group’s shared reputation for deliveringindustry leading services and in-depthindustry knowledge will continue tostrengthen our position as leaders in the fieldof building envelope evaluation, testing andcertification. Joining forces with UL willallow us to significantly accelerate ourgrowth and access to global markets, inaddition to providing our clients with abroader range of complimentary services andexpertise. Clients can rest assured thatcustomer service and technical quality willremain our top priorities, and that our newly integrated capabilities will deliver even

more value.’’The transaction closed on June 28, 2019.

Terms of the acquisition were not disclosed.

01952 586580 www.wintechtesting.com

UL and Wintech testing and certi�cationcombine to provide best in class



Appointments & News

Managing the varying heatingrequirements of an average family canbe hard enough, but imagine the

headache involved when the heating for 238properties is supplied via a communal, gas-fired,heating system. This is the scenario facing themanagement team of Courtlands Estate inRichmond, Surrey. This is a large, private estatecomprising 11 residential buildings. Of these, halfwere built in the 1930s and retain much of theirdistinctive style, with the remainder beingconstructed in the 1960s. The majority of the flatsare in private ownership on long-term leases whilsta few are retained and managed by the CourtlandsEstate company.

Ken Hassan, Company Secretary, and latterlyEstate Manager, explained more; “The estate has acommunal, gas-fired, heating system which ishoused in four boiler rooms and which serves all ofthe buildings, via a 6" district heating main. Thereare 15 commercial-size boilers, more than twodozen pumps of various sizes, and miles of overground and underground pipework. Theresponsibility of the estate team is to maintainreliable communal services for heating and hotwater, whilst dealing with the concomitant issues ofrepairs and maintenance that arise with plant of ourcomplexity and size.”

In 2009, the maintenance contract for the heatingsystem was put out to tender and the successfulprovider was Southern Maintenance Solutions (UK)Ltd, (SMS). Over the intervening years, SMS hasprovided comprehensive maintenance and servicing

which can be split into three categories:

a) The provision of reliable regular servicing of themajor items of heating plant e.g. boilers, pumpsand burners.

b) Periodic major contract work including thereplacement of ten old boilers.

c) Dealing with service issues, both minor issuesand those that are more urgent – e.g. a plantoutage, where a prompt service response, sevendays a week, is imperative.

Martyn Neves, Operations Manager at SMS,explained more about some of the specific issues thecompany has faced in the last decade. "A site likeCourtlands Estate has two main requirements. Thefirst is when there is a problem with the heating andour main challenge then is often finding the sourceof the problem. The solution is often relativelystraightforward but locating and repairing a fault,say in the pipework, can be difficult, especially if werequire access to several separate flats in order todeal with it. Secondly, as plant and equipment ages,regular and thorough servicing is important tomake sure that it is kept in good conditionthroughout its working life."

Work on a site of this size and nature is requiredthroughout the year, with the core element being aprogramme of scheduled quarterly maintenance."We don’t anticipate refurbishing any of the otherboiler houses in the next few years, but this year wehave a programme of replacing several old, beltdriven pumps with new inverter driven pumps,

which are more efficient and should be moreeconomical to run. We will also be replacing the gasbooster sets in the main boiler plant room togetherwith upgrading one of the two burners, againincreasing efficiency and saving costs," explainedMartyn Neves. "Otherwise we will be carrying outour routine maintenance of all plant rooms,together with water treatment and servicing of theBMS. We'll also be continuously renewing radiatorvalves as and when required."

Ken Hassan said: "Over the years of working withSMS, they have established a good understanding of our heating system. Their regime of regular andthorough maintenance has helped us to provide areliable service to residents, with downtime kept toa minimum, which is very important. We also value their advice and guidance when it comes toconsidering future works; we consider pro-activemaintenance very important, and theirrecommendations about this and plant replacementare always given careful consideration."

Each of the leaseholders on the estate holds ashare in the freehold company that owns andmanages the site. The elected Board of Directorsappoint the staff who run the affairs of the estatefrom the on-site office. “The shareholders want themost cost-effective servicing of the estate’s heatingplant while having the confidence that when theweather turns cold, each and every one of theresidents will be as comfortable as possible in theirown homes. SMS has been able to help the estatemeet these objectives and our satisfaction with theservice they have provided remains very high,”concluded Ken Hassan.

01635 33363 [email protected]

A decade of heatingmaintenance support


Bathroom pods for UK’s first vineyard hotelOffsite Solutions, a bathroom pod manufacturer,has provided high specification bathrooms forthe first vineyard in the UK to open a dedicatedhotel. Llanerch Vineyard Hotel is located in theVale of Glamorgan near Cardiff and offers five-

star accommodation, providing a gateway to tourism in Wales. Thehotel owners specified two pod designs from Offsite Solutions’extensive library of bathroom solutions. Commenting on the project,Ryan Davies, Director of Llanerch Vineyard Hotel, said: “Pods wererecommended to us as being faster on site and good quality. We thinkthe new bathrooms are just fantastic and exceptional quality.”

[email protected]

McAvoy to showcase latest advancements The McAvoy Group, one of the UK’sleading offsite specialists, will be presentingits full range of offsite solutions and latestinnovations at Healthcare Estates 2019.Delegates will also have the opportunity toexperience the Group’s award-winning

virtual reality technology at the event. A team of offsite healthcarespecialists from McAvoy for both permanent and interim hospitalbuildings will be available throughout the event to assist health serviceproviders, architects and specifiers looking to expand capacity moreefficiently, to meet the increasing demand for patient services.

www.mcavoygroup.com/healthcare


Appointments & News; Building Products; Interiors

sliding • swing • revolving • curved • folding • telescopichygienic • breach control • bomb blast • security interlocking

record is the largest supplier, installer and service provider of

automated pedestrian doors in the UK, offering door systems

for healthcare environments including hermetically sealed

sliding doors, where the highest hygiene requirements are

essential.

call: 01922 669341 � email: [email protected] � www.recorduk.co.uk

A Healthy Choice for Entrance Solutionsautomatic door systems

www.buildingconstructiondesign.co.uk

Digital magazineNewsletter • Daily digests

REGISTER ONLINE FOR...

@BuildConstDes


www.recorduk.co.uk


Interiors

Manufactured with an extrudedpolystyrene foam core and aspecial coating on both sides,

JACKOBOARD® construction boards forman ideal base for tiling in wetrooms. Thesurfaces of the JACKOBOARD® systemprovide an extremely strong bond and can beused on virtually any substrate. The boardsare moisture resistant, waterproof, thermallyinsulating, lightweight and very strong.

JACKOBOARD® high performanceconstruction boards provide the flexibility tomeet modern requirements in wetroomdesign. Recent changes in British Standardsfor tiling require the wider use of more appropriate materials for construction, andfor receiving tiles in water sensitive and wetareas.This has increased the demand for the JACKOBOARD® range in new build applications as well as in renovation works.

JACKOBOARD® products includingCANTO angled elements, WABO bath panelsand FLEXO boards allow the bathroom

designer to create customised dreambathrooms. The JACKOBOARD® range canform the basis for a tiled finish, as well aswallpaper, paint or plaster. So any bathroomcan be designed with its own individual style.

Due to their robust core made of extruded polystyrene foam (XPS), theJACKOBOARD® PLANO constructionboards and the wider product range are alllightweight and waterproof – a key benefitfor bathroom new build and renovation.

JACKOBOARD® also makes installationsimple and easy; the construction boards,FLEXO boards, bath panels and angleelements can be trimmed to the desireddimensions easily with standard tools.Another key benefit of the constructionboards is that their excellent insulation valuesmake them ideal for thermal insulation.

High performance, high quality drain kits,in both linear and point drain styles, are available alongside many variations of shower tray sizes and shapes. 01204 221089 www.jackon-insulation.co.uk

The ideal background for wetroom construction

Luceco has recently supplied an energysaving LED lighting upgrade to severalcampuses at Edinburgh College

including Sighthill, Milton Road, Granton,and Midlothian. To date there have been over6000 energy saving LED luminaires installedthrough a partnership with Ameresco, Lucecoand McCann Electrical.

Ameresco is a leading renewable energyand energy efficiency company offeringESPC-funded energy solutions for public andprivate organisations. ESPC (Energy SavingPerformance Contract) is a third-partyfinancing mechanism that allows buildingowners to fund energy-saving upgradesthrough savings made from future utility bills.Ameresco chose Luceco as their preferredlighting manufacturer for Edinburgh College.

Platinum LED Downlights were installedin the sports and health facilities at MiltonRoad along with open plan communal spacessuch as cafeterias and foyers, offering possiblerunning cost savings of up to 80 per cent.

LuxPanel luminaires were installed intoseminar rooms and lecture theatres, highefficiency Backlit LuxPanels boasts a marketleading efficacy of 152 Lm/cW, providingnon-obtrusive but effective lighting in hightraffic areas and improved glare control.

Edinburgh College is committed to a moreenergy efficient and cost-effective future

throughout their estate, LED lighting fromLuceco being a contributing factor, as well asmaintenance on lighting provision beingsubstantially reduced due the elimination ofre-lamping of old luminaries.

01952 238 100 www.luceco.com

Luceco, McCann Electrical and Amerescopartner to relight Edinburgh College


PCSHigh Performance Construction Products

The Overlay Panel That Insulates & Dissipates.

Aqualay is a high performance pipe carrier panel designed for use with

pre-set pipe channels set 100mm, and 150mm centres and comprise of 3 different panel options; Aqualay Master Panel, Aqualay Universal Panel and

Running through the body of each Master Panel is a highly effective heat transfer core, manufactured from a special conducting cement compound;

patented Master Panel is unique in structure; providing insulation against downward heat loss, whilst at the same time effectively transferring heat

+44 (0) 1942 820 [email protected]

For more information

+44 (0) 1942 820 [email protected]


Interiors

The London Gunnnersbury ParkMuseum is a perfect example of howhigh-performance acoustic solutions

can solve the problem of noise in public andleisure places. As design trends continuetowards minimal furniture and hard surfaces,it becomes increasingly important to reconcileaesthetics with personal comfort.As part of its Heritage Lottery Funded

redevelopment, London’s once-neglectedGunnersbury Park Museum has beentransformed. It now boasts new gallery andlearning spaces as well as a brand-new exhibittelling the stories of local people. A newaddition to the Regency Mansion is thepavilion, originally designed to house boththe catering facilities and horse-drawncarriages that are a large part of the Park’sheritage. When considering its redesign, thearchitects wanted to create a space thatwould provide a hub for the Park. It neededto be a space that emotionally connected withvisitors to the Museum and regular users ofthe Park. With this in mind, the designers decided to

specify Troldtekt panels. With their natural

look and feel and acoustic properties, theywere the ideal solution for the ceiling. It allowed them to use harder surface materials elsewhere to suit the architecture ofthe pavilion. Path Design says, “We needed to

ensure that we addressed what could be arelatively hard interior because of theheavy floors we needed for high trafficcatering and the predominantly glazedelevations. As such, we looked to softenacoustically the space to reduce the

background noise generated by the openkitchen and coffee machines, along with thegeneral noise created by visitors.”Troldtekt panels are commonly specified

throughout the UK and Europe to improvethe interior acoustic environment. They offer high sound absorption, high durability, natural breathability and low cost life cycle performance in addition to inherent sustainability.

01978 664255 www.troldtekt.com

The quiet fun solution


mailto:[email protected]


www.rocketdoorframes.co.uk


Exteriors

Claimed to be the UK’s largestPassivhaus development to date andCamden Council’s largest community

project, Agar Grove Estate is undergoing amajor regeneration, due for completion in2025. It will deliver 493 high-quality homesfor existing residents, with ground floormaisonettes and apartments above with fullwidth balconies. As the project is to Passivhaus standard, the

high levels of insulation mean exceptionallevels of airtightness; and a critical requirementis the avoidance of thermal bridging. Afrequent cause of increased heat and energyloss, condensation and likely mould growth. The risk of thermal bridging is at

connectivity points involving the balconies andparapets. And one of the most effectivecountermeasures is the Isokorb range ofstructural thermal breaks from Schöck. TheIsokorb type used for the balconies hasbeen awarded the “low thermal bridgeconstruction” certificate by the Passivhaus

Institute in Darmstadt and transfers bothnegative moments and positive shear forces. The conventional insulation method for

parapets is to wrap the perimeter of the wall with an insulation barrier. However the Schöck Isokorb designed for parapetsavoids the need for wrapping. It is more cost-effective than conventional wrapping and

its 120mm insulation dramatically reducesheat loss.. Also there is no risk of anyadditional thermal bridging throughbalustrade fixings, it requires no maintenanceand no expensive restoration due towaterproofing problems. In addition to the Isokorb types used at

Agar Grove, the comprehensive Schöck range also offers solutions for concrete-to-steeland steel-to-steel situations. When any Isokorbproduct type is incorporated into residentialbuildings, the required fRsi value is alwayscomfortably met. Products meet fullcompliance with the relevant UK buildingregulations, have NHBC approval and offerLABC Registration. There is also the securityof independent BBA Certification.Contact Schöck or visit the website for a

free copy of the Schöck Thermal BridgingGuide; the Schöck Specifiers Guide and toview the full range of downloadable software.

01865 290 890 www.schoeck.co.uk

Schöck Isokorb for largest UK Passivhaus development

The re-built athletics facilities atHarrow School included an IAAF-standard running track, facilities for

long jump, high jump, discus and all the mainathletics events, plus a water jump for thesteeplechase and an area for the pole vaultevent – a relatively rare feature in UK schoolathletics facilities.Hauraton SPORTFIX components

installed at the Harrow School sportscomplex include; drainage channels around the edge of the running track, sand

traps and soft kerb edging around the longjump pit and a water jump kit on the steeplechase track.At any time in the UK, rain can stop play

and on tennis hard courts the build-up ofwater can take some time to run away ifattention has not been paid to the surfacewater drainage requirement. At HarrowSchool tennis courts this is not a problem asa discreet drainage channel run located justbelow the net efficiently drains away anyexcess rainwater. Over the years Hauraton have built up a

fund of knowledge, second to none, of howto drain sports areas be they soccer grounds,athletic tracks or tennis courts.Other components in the SPORTFIX range

include; Electrical distribution shafts, Servicechannels for cable management, pitch dishedging components and drainage channelsspecifically designed for artificial turf pitches.

01582 501380 www.hauraton.co.uk

Harrow School has IAAF-standard running track



Exteriors

German architectural office AuerWeber designed the roof structure forthe new indoor swimming pool at

the Sports Centre Cents in Luxembourg. Theceiling was built using extremely longwooden elements, extending up to 23.75metres. This enabled the long-spans and theattractive design of the roof. The key formaking this possible was using fast, light andgreen Kerto LVL (laminated veneer lumber)products produced by Metsä Wood.The suspended floating wooden ceiling was

structured with slim ribs and an aboveaverage web height. The structural design andcalculations were done by Knippers Helbigengineers and the implementation was carriedout by the wood construction companyHolzbau Amann. Use of Metsä Wood’sKerto® LVL Q-panels made the desired roofappearance and the structure possible.The dimensions of the roof are impressive.

The goal of the architecture was to create awooden rib ceiling with deep cassettes with

long spans to create the large spatial volume.The dimensional stability of the Kerto LVLweb was a great advantage here. The structure was produced using the Kerto LVLweb with a height of 1.1 metres and a thickness of only 75 millimetres.Hendrik Pfeffinger, the project manager at

Holzbau Amann, explains “We went beyondstandards for the ratio of thickness and theheight of the beams, so special solutions had to be established which would on the onehand meet the requirements of KnippersHelbig, while conforming to the structuralanalyses and approvals in Luxembourg.” For the implementation of these slim dimensions, the Q-panels were virtuallypredestined for the job thanks to their highload-bearing capacity.The wooden roof elements were

prefabricated at Holzbau Amann’s factoryand delivered by extra-long trucks to theconstruction site. Although the elements arealmost 24 metres in length, their installation

was quick and required only two carpenterson site. The end faces were finished off with end panels to finalise the appearance ofthe roof.

www.metsawood.com

Roo�ng with extremely long wooden elements for an indoor swimming pool

The merger of two educationalinstitutions involved an extensivebuildingproject with conversions of

existing buildings and the construction of anew one.

The newly constructed ‘Building B’ is cladwith approximately 1,800 m2 of perforatedcorten, manufactured and supplied by RMIG.The new building with its eye-catching facadegives the university an architectural identityand visibility in the streetscape and at thesame time provide shade from the sun. Theraw surface of the corten steel facade fits inwell with the raw and edgy part of the citywhere the university is located.

01925 839610 www.city-emotion.com

University campus gets a facelift

TECHNICAL CHARACTERISTICS

Raw material: CortenPattern: R8T10Thickness: 2.0 mmFinishing operations: Bending

METROPOL – UNIVERSITY COLLEGECOPENHAGEN

University, Copenhagen,DenmarkArchitects: KANT arkitekter



Exteriors

Nordic Brown pre-oxidised copperfrom Aurubis forms part ofthe restrained palette of natural

materials defining the new St John’s PrimarySchool, Ealing, London, designed by Conranand Partners with detailed design byexecutive architects Gibberd.

Conran and Partners’ idea for a new schoolgrew out of their proposals for the ongoingregeneration of Green Man Lane estate. Withan exchange of land, the existing school couldremain operational while a new one wasconstructed. Configured as a three-storeystructure, the new school building sits alongthe site boundary edge, creating a strongstreet form and conveying a mature learningenvironment while giving the school its owndistinct identity.

The entrance is demarcated by a floating,oblique form – clad in Nordic Brown copperwith defined vertical seams – informing thedesign detail throughout. A glazed corner

provides transparency and signifies both themain school entrance and the circulation axisthrough the building. The strong verticalemphasis of the street elevation will set theschool apart from the proposed neighbouringresidential components of the development.

A restrained palette of natural materialshas been selected throughout the new school– from weathered buff brick to the NordicBrown pre-oxidised copper – to reinforce thedesign narratives. These materials providerobustness and warmth, while blendingseamlessly with the material palette of thewider masterplan for Green Man Lane estate.

Nordic Brown products are pre-oxidised at the Aurubis factory to give straightawaythe same oxidised brown surface that otherwise develops over time in the environment. The thickness of the oxide layer determines the colour – either NordicBrown Light or the darker Nordic Brown –and the darkening oxidisation process continues in the natural environment.

Other Nordic Copper surfaces includeNordic Standard ‘mill finish’. Nordic Greenand Nordic Blue are factory-applied patinasdeveloped with properties and colours based on the same brochantite mineralogyfound in natural patinas all over the world.

Essentially, they enable designers to determineboth the colour and intensity of patina foreach project with ‘living’ surfaces: as well asa solid patina colour, other intensities can becreated revealing some of the dark oxidisedbackground material.

Aurubis copper alloys include Nordic Brass– also available pre-weathered – NordicBronze and the innovative Nordic Royal witha long-lasting golden colour.

01875 812 144 www.nordiccopper.com

Educational Copper

© Luke Hayes

The new Ram Quarter mixed-use development at the heart of theLondon Borough of Wandsworth is

highlighted by its rooftop cladding of NordicGreen Living 1 pre-patinated copper, reflecting the site’s industrial heritage.

Greenland Group UK, the developer ofRam Quarter, was keen that the site’s materialspecification should help to reflect the historyof the site and deliver high-quality design andlong-term durability.

EPR Architects, the appointed architecturalpractice for the scheme, was tasked with ensuring that the development designcomplemented both the industrial characterof the site and its transformation into aresidential neighbourhood.

Inspired by old copper brewing vessels, thearchitects decided to clad the upper twofloors of the tallest residential buildings inNordic Green Living 1 copper. Adjacent tothe old brewery complex, a playful verticalexpression was added to one of the new

buildings – a nod to the industrial vats thatwere once housed on the site – raised fromthe ground, with softer rounded corners andvertically-ribbed profiled Nordic Greencopper cladding.

In addition to Nordic Green, extensiveNordic Blue and Nordic Turquoise rangeshave been developed. All these surfaces forman integral part of the copper and are notcoatings or paint, and ongoing changes willcontinue over time depending on the localenvironment. As well as the solid patinacolours, ‘living’ surfaces provide variousintensities of patina flecks revealing some ofthe dark oxidised background material.

Other Nordic Copper ranges from Aurubisinclude Nordic Standard ‘mill finish’ andNordic Brown pre-oxidised copper, offeringlighter or darker shades of brown determinedby the thickness of the oxide layer. A widechoice of Nordic Decor mechanically appliedsurface treatments is also available. NordicCopper alloys include Nordic Brass – which

can also be supplied pre-weathered – NordicBronze and the innovative Nordic Royal, analloy of copper with aluminium and zinc,enjoying a rich golden through-colour whichremains very stable.

01875 812 144 www.nordiccopper.com

Nordic Copper skylinecrowns the new Ram Quarter

© Anthony Weller



Exteriors

Excessive rain water has to be removedquickly and reliably from sports fields and competition areas. The

SPORTFIX® drainage channels and other components offered by Hauraton complywith the latest standards and also meet IAAFrequirements. It is essential sports facilitiesare designed and equipped to prevent seriousinjury to sports people if falls or accidentsoccur.

The University College Cork (UCC) hasredeveloped their Mardyke Athletics Track inCork City, Republic of Ireland. The new facility is part of a €10 million budgetincluded a new synthetic eight lane, fullyfloodlit, running track built to the IAAFstandard with an additional 3720 m² (40,000ft²) added to the original arena. The arenanow includes an indoor 60 metre runningtrack, a performance analysis suite, twoadditional gym areas with over 140additional pieces of the latest gym equipmentand three additional fitness studios.

Hauraton SPORTFIX® drainage channelswith aluminium finishing edges were installedaround the perimeter of the IAAF, 400 metretrack and along its straight. A steeple chase water jump kit was also installed plus Hauraton SPORTFIX® Sand traps andsoft edging were installed around the longjump pit.

Tim Connolly, Managing Director ofHauraton Limited points out, “Our SPORT-

FIX® range offers products that not only meetthe requirements of the IAAF for athletictracks, there are drainage components for artificial turf playing fields, servicechannels and retractable shafts for cablemanagement with drainage systems forgrassed football fields”.

01582 501380 www.hauraton.co.uk.

SPORTFIX® components installed at redeveloped UCC Mardyke Athletics Track

Comar profiles have thicker wallsproviding extra strength anddurability for the British market,

ensuring that Comar performs. Designedspecifically for the British Market andoffering a truly British engineered solution.

Comar ECO LT is a newly launchedaluminium window and door systemdesigned for the trade and installer market,where a competitive price yet the highestinstalled performance is required. Sightlineshave been minimised whilst not sacrificingproduct performance. Large sizes come asstandard from the same range of profiles.

With low U-values, energy ratings of A++and Document Q compliance with Securedby Design status this is a feature rich systemwhich guarantees a quality installation.

Comar ECO LT is a lightweight version ofthe ECO range, but the aluminium profileswall thickness has not been sacrificed,ensuring guaranteed long-term performance.Due to Comar’s robust British design the size

and weight limitations surpass thecompetition on a size by size basis.

5P.I ECO LT - Aluminium Window SystemComar 5P.i ECO LT Aluminium Casement

Window System has both internally andexternally glazed options. With theresurgence of slim aluminium high securityexternally beaded with sloped beadsminimises the sight lines and maximisesdaylight. The square chamfered profiles are adistinctive feature of this system, keeping thesquare look of a truly aluminium solution.

For Ovolo feature the ECO rangeseamlessly suites in: No matter the situationComar 5P.i ECO LT delivers.

7P.i ECO LT - Aluminium DoorSystemComar 7P.i ECO LT Aluminium DoorSystem has both inward and outwardopening options in single or double doorcombinations. There are two thresholdsavailable high weather performance and

low-rise for seamless balcony terraceintegration. Comar 7P.i ECO LT door hasbeen designed to provide high performancesolutions for today’s specification demands.Utilising Comar’s trademark P.i. (PolyamideInsulation) thermal break technology, itdelivers superior thermal performance withan aesthetic edge.

Aesthetics come from its slim 55mmprofiles, seamlessly integrating with theComar 5P.i ECO LT casement windowsystem. Comar 7P.i ECO LT has been testedto BS 6375 which ensures the door performswell against the rigours of the British weather,reducing draughts and providing excellentweather proofing.

020 8685 9685 www.comar-alu.co.uk

Comar Launch the ECO LT Window & Door Systems



Exteriors

Experienced South East installer Newview might be best known for itsextensive work on Heathrow’s Quieter

Homes scheme.But that’s not the limit of the company’s

commercial expertise.Right across the capital, you’ll find

exceptional Newview installation work on a huge variety of commercial and residentialdevelopments – including in three twenty-storey tower blocks.

London City Airport, which serves over 4 million passengers every year, called onNewview as Principal Contractor to install nearly750 windows in 240 flats across the three buildings, plus a further 360 flats in variousother blocks and roads around the airport.

Acoustic insulation was a vital considerationon this project – the flats aren’t just in very closeproximity to the airport itself, but the area is also subject to ongoing and often-noisyconstruction work.

For that reason, Newview fitted Profile 22’sacoustically-exceptional Optima windows,including laminated 10.8mm Optiphon glassfrom Pilkington.

Optima’s five-chambered sash section and

six-chambered outer frame offer excellent structural strength and thermal and acousticinsulation – while Optiphon’s PVB interlayermakes it the perfect choice for use in noisy city environments.

What’s more, to maximise comfort for building residents, Newview also installedhundreds of Siegenia Mechanical through-wallventilation units.

“Acoustic insulation is a Newview speciality,and it was great to be working with London CityAirport on this project,” comments ManagingDirector Michele Wiestcher.

“Our installers did an amazing job working at height and contending with tight deadlines.

“We’re delighted that we’ve now been askedto continue working for the Airport throughout2019, with refurbishments to a minimum of 400 more properties scheduled for later this year.

“If you’re interested in having some world-class installation work carried out on your next project, please don’t hesitate to get in touch!”

01903 244 449 www.newview-homes.co.uk

Newview’s towering performance impresses London City Airport

Kalwall rockets awayAerospace company Blue Origin’s vast new 70,000 square metrefactory in Kennedy Space Centre's Exploration Park in Florida is nowmanufacturing ‘Glenn’ rockets for launches at Cape Canaveral 10 milesaway. Owned by Amazon founder Jeff Bezos, the Blue Origin buildingfeatures specially-designed Kalwall® translucent cladding which hasbeen used across the top of the building in a clerestory design.Manufactured with a bespoke face sheet to match the corporate colourscheme, 100’s square metres of Kalwall transmits high quality diffuseddaylight into the structure whilst also solving the twin requirementsof privacy and security. Interestingly, the use of a bespoke colouredface sheet does not affect the quality of light internally. Kalwall offerscomplete line-of-sight protection, maintaining privacy for buildingoccupants and operations while throwing diffused daylighting deepinto the interior space. It also eliminates shadows and glare and thestark contrasts of light and shade making it safer for within. Thesystem also enhances simplicity in external design by negating the needfor blinds, curtains or solar control.

www.structura-uk.com/kalwall

Photo courtesy of Destination Brevard

Profile 22 helps transform 1960s buildingOver 1,000 Profile 22 Optima Chamfered Windowshave been used in a conversion project in CheadleHulme, Cheshire. Profile 22 Approved WindowContractor Kingfisher Windows won the contract forthe work because it was able to meet the exacting

specification at the most competitive price. Kingfisher Windows tenderedfor the work with Profile 22 Optima Chamfered Windows. The Optimasystem is often specified on commercial contracts because of itsintelligent design, impressive performance and attractive good looks. Thesystem delivers a 1.2 W/m2K U-value as standard, with U-values as lowas 0.8 W/m2K possible, and achieves BS7412 weather performance.

www.profile22.co.uk

Profile 22 transform housing projectProfile 22 Fully Reversible Windows were specified inthe refurbishment of 15 tower blocks in Bristol. Thelegacy PVC-U windows, doors and curtain walling at15 high and low-rise blocks owned by Bristol CityCouncil at Eastville, Easton, Clifton, Redcliffe,Shirehampton and Ashton Gate needed to be replacedto improve thermal efficiency, security and aesthetics.

The 70mm Optima casement system offers superb design and easyinstallation. The slim, chamfered shape is clean, contemporaryand attractive, making it suitable for a wide range of applications,including casement, tilt and turn, French casement and French doors.

www.profile22.co.uk



Exteriors

Minimising energy use in buildings, by improving thermal performance of the building

envelope, has become increasingly importantin the drive for sustainability and energyefficiency. And the prevention of thermalbridging is critical with structural attachments such as balconies. Ineffectualinsulation at the connection points meanslocal heat loss, with more energy beingrequired to maintain the internal temperatureof the building. This is an important aspect ofthermal bridging, but there are other issues.Low internal surface temperatures in the areaof the thermal bridge can cause condensation.Leading not only to structural integrityproblems with absorbent materials such asinsulation products or plasterboard, but thepotentially serious occurrence of mouldgrowth. So for any large-scale project involving a variety of different balcony types,the prevention of thermal bridging is particularly important.

Challenging variety of balconytypes One current project with a challenging varietyof balconies is Hendon Waterside in NorthWest London, a mixed tenure development.Situated alongside the Brent Reservoir(known locally as the Welsh Harp after apublic house which used to stand nearby), thescheme involves the regeneration of a 1960shousing estate being built in six phases andscheduled for completion in 2027. Themasterplan will deliver around 2100 newhomes consisting of social, affordable andprivate housing. These are being constructed

in twenty-three blocks, varying in height fromthree to twenty-three storeys – along with animposing tower building of twenty-eightstoreys. Also planned are new public parks, aprimary school, community centre andcommercial space.

Hundreds of Isokorb variants inthe range The many balconies involved vary in theirdesign demands and to ensure that thermalbridging is minimised, Schöck has suppliedover thirteen different product variants.As the leading international supplier ofstructural thermal breaks, Schöck has asolution to practically every connectivitydetail with the hundreds of variants availablein its Isokorb range. The products at Hendonare for concrete-to-concrete and provideoptimum solutions by using varying tensionbar arrangements. For example, one typeprovides cantilever balcony connections and

transfers both negative moments and positiveshear forces. Another is a load-bearingthermal break element for transferring shearforces on supported balconies, recessedbalconies and for occasional peak shearforces. Others transfer positive shear forceswith point support, or transfer positive shearforces with point support and zero stress connection.

Totally verifiable performanceIn addition to concrete-to-concrete,the comprehensive Isokorb range alsooffers solutions for concrete-to-steel and steel-to-steel – and even a maintenance freealternative to wrapped parapets. Arequirement that the temperature factor usedto indicate condensation risk (fRSI) must begreater than, or equal to, 0.75 for residentialbuildings, is easily met by incorporating theIsokorb. Products meet full compliance withthe relevant UK building regulations, haveNHBC approval and offer LABCRegistration. There is also the security ofindependent BBA Certification.

01865 290 890 www.schoeck.co.uk

Over 13 Schöck product variants at Hendon Waterside

The main Tower from across the Welsh Harp

One of the Isokorb types used at Hendon Waterside

Inside the complex


B&K Structures are not engineeredtimber purists. Our business modelfocuses on hybrid construction

solutions – however, CLT is by far the mostexciting revolutionary building material ofthe 21st century and will be significant in ourfuture development plans. Only now are wetruly realising the full capabilities of thisstrong, sustainable and technically advancedstructural solution and the new regulationswill not stifle innovation.

The UK has a magnificent heritage oftimber architecture dating back to thethirteenth century. We are now building onthis legacy using ground-breaking engineeredtimber systems. We develop high quality, low

carbon projects for a wide range of clientsthroughout the UK and through our robust,integrated supply-chain, B&K Structures arededicated to finding the best solution.

Putting the changes in to perspectiveChanges in the Building Regulations haverestricted the use of engineered timber inthe external wall elements over 18m, that iscirca six-storeys. To put the changes in toperspective, we have constructed in excess of50 cross laminated timber projects over thepast 15 years, of which only three would havefelt the impact of the regulatory change anda cost neutral wall solution would have beensimple to implement.

The engineered timber sector by its verynature, is founded on innovation – we arepioneers of sustainable construction and withmodifications, B&K Structures will ensurebuilding highly sustainable CLT structuresover six-storeys is not only possible but alsohighly practical.

The restriction applies to the external walls of residential accommodation, carehomes, hospitals and school dormitories over18m. The rest of the building including internal walls, floors and roof can therefore be formed in CLT. This equates toapproximately 80-90 per cent of the overallstructural frame.

In anticipation of the government

The Future of CLT Construction Buildings are the sum of many parts and we need a full portfolio of materials toachieve the best outcomes in terms of, performance, sustainability, safety, durability,efficiency and cost. Since the new Building Regulations came into force on21 December 2018, much has been written about cross laminated timber (CLT) –here Andy Goodwin shares with ADF how B&K Structures have planned for suchan event and have taken a pragmatic approach to embrace the new protocols


Exteriors



Exteriors

announcement, we have been working inclose collaboration with our supply chainpartners to develop alternative through-wallsolutions that can be implemented with aprimary CLT superstructure.

Our non-combustible unitised wall panelsystems have been developed with leadingindustry supply chain partners. These systemsreplace the cross laminated timber elementsfrom within the external wall line with ahot rolled structural steel carrier frame andnon-combustible SFS infill wall panels,the remainder of the structural frame willbe constructed in CLT, which is totallycompliant with the regulatory changes.

As part of the research and developmentof these compliant solutions, carefulconsideration has been given to the designinterface between the CLT superstructure andthe SFS walling system. The SFS system andassociated connection details have beendesigned to take in to account increased loadcases attracted by traditional brickwork,heavier brick slip systems and balconylocations. Importantly the system is cost andprogramme neutral.

We have been instrumental in the development and growth of the CLT market in the UK, and through continuedcollaboration with our supply chain andindustry stakeholders, this will continue. The latest Building Regulations merelychange the way we construct the externalwalls to residential schemes above 18m. Wewill continue to work with our clients toensure that any new projects are designed anddelivered in accordance with the newBuilding Regulations.

Over the last 10 years CLT has beenemerging as a sustainable and cost-effectivebuilding material of choice and a vitalcomponent in the battle to reduce carbonemissions in the construction sector. We mustconsider the specification of materials whenconstructing large scale developments toensure we minimise the impact on theenvironment, not just for us but for the healthand wellbeing of generations to come.

Products and ServicesOperating since 1974, B&K Structures has worked with some of the UK’s renowned clients to develop outstandingbuildings with green credentials. For moreinformation on their product portfolio and full range of services, please contact the company.

01773 853 400 www.bkstructures.co.uk



Exteriors

Mapei products have been specifiedfor a structural repair project at the University of Essex in

Colchester. The Reinforced Concrete framedpodium that provides a link between theuniversity buildings and a roof to the serviceroads at lower ground was partiallydemolished, with the remnants of the podiumbeing reused with a new building structure. In a structural survey commissioned by the

University, and undertaken by engineersMason Navarro Pledge (MNP), it wasconcluded that the second beam requiredstrengthening to support loads that would beapplied in a permanent state due to the heavyuse of the link bridge. The beam showed signsof significant corrosion at the support of theexisting footbridge, and the columns hadareas with steel corrosion and delaminationof concrete due to low concrete cover. Working hand in hand with engineers

and specialist contractors CemplasWaterproofing and Concrete Repairs Ltd,Mapei proposed a complete Concrete Repairand Protection solution in accordance withTR55, Design Guidance for StrengtheningConcrete Structures using Carbon FibreComposite Materials. Cemplas Waterproofing and Concrete

Repairs Ltd completed the works to a verytight schedule thanks to the Fast Track natureof the materials used on site; during the

project, a total of three Mapei systems wereused for concrete repairs, structuralstrengthening and protection.

Concrete Repairs: The concrete was found to be badlydeteriorated in certain areas of the beam, andthe columns had areas where the concrete hadspalled due to corrosion of the reinforcementsteel caused by low concrete cover. Mapeirecommended removing the deterioratedconcrete and then cleaning the steel prior tothe application of Mapefer 1K, a one-component corrosion-inhibiting protectivemortar for the reinforcing steel. The beamwas then repaired with Mapemortar HB R3,a high build thixotropic mortar which can beapplied on vertical and overhead situationswithout formwork to a depth of up to 70mmper layer. The columns were repaired with thestructural rapid-setting, thixotropic fibre-reinforced mortar Planitop Smooth & RepairR4 which can be applied between 3mm and40mm in depth.

Structural Strengthening: After repairing the beam, it was prepared byrounding the corners. An even coat ofMapewrap Primer 1 was applied to theconcrete surface, and whilst still fresh,Mapewrap 31 – the two-component, mediumviscosity epoxy resin was applied. Mapewrap

C UNI-AX HM 600, a high-strength,unidirectional carbon fibre fabric with highmodulus of elasticity, was laid into theMapewrap 31, which impregnated andbonded the fabric. Alternate layers ofMapewrap 31 and Mapewrap C UNI-AXHM 600 were applied until the correct buildup was achieved to meet the Strengtheningdesign. Once the final layer of Mapewrap 31was applied, Quartz sand was broadcasted into the wet resin to provide a key for theprotective covering system to be applied on top.

Protective System: Mapelastic Guard, a protective two-component, flexible cementitious mortar wasapplied to provide an effective protection fora 50-year design life. It was the ideal choicefor the engineer as it protects the concreteagainst the penetration of aggressiveatmospheric agents that can lead tocorrosion, and protects the concrete in areas of low cover as a 2mm coating ofMapelastic Guard corresponds to 30mmconcrete cover. In addition, it helps to protectthe Mapewrap C UNI-AX HM 600, andbecause of its light grey colour gives auniformed concrete appearance, blending therepair into the building.

0121 508 6970 www.mapei.co.uk

Mapei strengthens expectations in Universityof Essex structural repair



Exteriors

Shelforce are experienced specialists inproviding PVCu windows and doors forLocal Authority social housing projects.

A leading PVCu windows and doors manufacturer, Shelforce are Birmingham CityCouncil’s chosen manufacturer and supplier of choice and have worked on a huge numberof local authority projects.

From high rises to new builds, Shelforce haveexperience with all types of social housing refurbishment and maintenance and havedeveloped a first-class reputation for providingLocal Authorities with the highest qualityproducts and finishing each project on time andwithin budget.

Whether a Local Authority needs casement,reversible or tilt and turn windows, or composite, residential or patio doors, Shelforceprovide the best solution that is most cost-effective for you, and more attractive and securefor your tenants.

The reason for their success is simple, according to Howard Trotter, Shelforce’sBusiness Manager.

“We understand the challenges LocalAuthorities face and what is important for boththem and their tenants,” said Howard.

“We understand that Local Authorities areunder pressure to complete maintenance andrefurbishment programmes on time and withinbudget, and as budgets are cut, they need todeliver more for less.

“They also want to provide the best service

for their department and their tenants, but theywant quality at a fair price. We also understandthat tenants want to feel safe and secure andhave pride in their home.”

SOCIAL RESPONSIBILITY AND VALUESShelforce lead the way in inclusivity when it comes to training and employment opportunities in the glazing industry, with 75per cent of their workforce disabled.

A training facility will also be opening at theirfactory in Erdington to welcome students fromnearby schools, including special needs schools,and offer regular work experience placements.

Howard said: “Investing in the future byhelping young adults of all abilities take theirfirst steps into the workplace is one of the keysto both our and the industry’s future growth.”

Sustainability is also a big consideration forShelforce, and the company uses new profilesmade from recycled material from unwantedPVC-U frames thanks to Eurocell’s very ownrecycling plant.

INTEGRITY Shelforce are highly accredited and ensure thatall windows and doors surpass the standards ofPAS 24. They also work closely with bothlandlords and tenants if required to ensure thateveryone is satisfied with all work undertaken.

Their products are also rigorously tested, and Howard said: “We feel we have that trustelement that is vital to Local Authorities.

Because we work for Birmingham City Council,our products are rigorously tested. Instead ofjust sending the best one we make for testing,the council turn up unannounced and selectone at random, so our products must be spot onevery single time.”

VALUE FOR MONEY Shelforce’s Eurocell Eurologik profile system notonly offers high performance but huge value formoney too.

The advanced six-chambered system andinnovative PVC-U Thermal Inserts work togetherto lock in heat which maximises thermalperformance making the window incrediblyenergy efficient. This means that a cheaper glassunit can be used, and the window will stillachieve an ‘A+’ energy rating.

The slim, six-chambered outer frame costs nomore than the standard Eurologik outer frametoo, so there is no cost barrier to installing thehighest energy efficiency-rated profiles.

Howard added: “The local authority market isperfect for us as we can save them moneythanks to our quality, quick lead times, deliveryand price. This value engineering means thatthe money saved can then go straight back intothe local authority to be reinvested elsewhere.

“When you put this together with our socialvalues, it makes us an attractive proposition forLocal Authorities.”

0121 603 5262 www.shelforce.com

Shelforce - understanding what Local Authorities want


• Daily digests

R


Exteriors

Freefoam help Key Partnership Homes reduce wastage

With statistics regularly quoted about the amount of waste we are all sending to landfill, businesses are looking toplay their part in reducing waste and operating more efficiently. The housebuilding industry are working to meetthese challenges throughout the whole construction process. There are three basic strategies for dealing withwaste: reduce, reuse and recycle. Waste reduction is the ideal, identifying possible waste streams early on in thebuild process. Scheduling and estimation play a big part. Better communication between building professionals toensure exact calculations of materials can mean that waste is prevented at source. Freefoam have recently helpedKey Partnership Homes do exactly this at their new site at Caleb Close, Luton. Freefoam Commercial Director ColinSt John summarised “Listening and responding to the needs of our customer is part of our DNA. As responsiblemanufacturers we were delighted that on this occasion we were able to support our Customer to make a significantcontribution to the reduction of site waste. This project is just one more example of how Freefoam are willing towork in partnership with our suppliers and house builders to adapt products that will meet the needs of all parts ofthe supply chain and deliver long lasting sustainable benefits.”

01604 591110 www.freefoam.com

Garador introduces new GRP garage doors

Garador has introduced a new range of GRP garage doors, bringing the total number of garage doors in their rangeto over 60. The GRP range is comprised of both up and over and side hinged garage doors, with nine up and overgarage doors and four side hinged garage doors available.

All the GRP up and over garage doors are available in a selection of standard sizes, which is ideal for housing devel-opers looking to specify a standardised and cost effective solution for their development. Garador also offers madeto measure door sizes and double doors on certain models, with door sizes going all the way up to 4269mm wide.

GRP up and over doors are available with both canopy and retractable operating gear, with the latter also suitablydesigned for electric automation with a GaraMatic electric operator.

Browse the complete GRP garage door collection on the Garador website or call for more information.

01935 443794 www.garador.co.uk

Building solutions for climate changeThe vast majority of existing buildings arevulnerable to climate change. Architects areincreasingly adopting ‘materials in motion’ tofind new ways of creating dynamic designsthat have aesthetically pleasing features. Metalcladding facades are visually captivating and

provide a number of performance-related benefits. The metal meetsenergy-efficient performance specifications and can be integrated intomulti-functional designs. Visit the Vulcan Cladding Systems websiteto find out more about their range of composite cladding andweatherboard cladding.

0208 681 0617 www.vulcansystems.co.uk

Convenient and paper-freeEnjoy reading ADF but find it’s not alwaysconvenient to have the printed magazine?Or has your workplace turned paper-free?The Digital Issue offers you the samecontent, delivered straight to your inboxand accessible via smartphone, tablet and desktop computers. Be among the firstto read all the latest features, comment,interviews, and more, before the print

issue has even been delivered! What’s more, the Digital Issue includesinteractive links to featured companies. Subscribe for free now.

www.subscribepage.com/adf

Selfbuilder & Homemaker websiteThe Selfbuilder & Homemaker website is anonline provider of past and presentproducts and news items for all thoseinvolved in and working on a self-buildproject. www.sbhonline.co.uk is a one-stopsource for all the latest press releases,providing visitors with access to informationabout products and services that they mayrequire. From the website, you can find linksto digital issues that have live links toadvertisers’ sites, as well as daily email alertsto keep you as informed as possible. You

can also subcribe to receive regular copies of the printed and digitalversions of the magazine, or sign up to the monthly Selfbuilder &Homemaker newsletter.

www.sbhonline.co.uk

Housebuilder & Developer website

The Housebuilder & Developer (HBD)website is an online provider of pastand present products and news itemsfor the housebuilder and developer.hbdonline.co.uk is a one-stop source forall the latest press releases providingany visitor with access to informationabout products and services that theymay require. From the website, you canfind links to digital issues that have live

links to advertisers’ sites, as well as daily email alerts to keep you asinformed as possible.

www.hbdonline.co.uk


www.buildingconstructiondesign.co.uk

Digital magazineNewsletter • Daily digests

REGISTER ONLINE FOR...@BuildConstDes

Building Construction Designs is an online turn pagemagazine offering the whole building team information onthe latest products and services.As well as the online magazine, Building ConstructionDesign also offers a comprehensive press release archivewebsite, monthly email newsletters and a digitalmarketing service, as well as a news blog.


Cover image: RMIGSee page 11 for details


Date post:	19-Jun-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

building construction design - Amazon Web Services · ing utilises research and strategy as the...

Documents