www.BDCuniversity.com BUILDING DESIGN+CONSTRUCTION MARCH 2015 43 L aser scanning technology continues to gain momentum in the construction industry for its ability to help Building Teams collect tons of highly accurate information in a very short period of time. When done right, laser scanning can prove beneficial to all stakeholders throughout the life cycle of a project. In the last two years, JE Dunn has performed 1,450 hours of laser scanning data collection. Although surveying and scanning is not our primary business, our experience in using laser scanning has definitely helped us enhance the quality of our work and our work processes. Here are nine things we have learned about using laser scanning effectively in a wide variety of recent projects. BY TRENT NICHOLS, LEED AP, JE DUNN CONSTRUCTION Trent Nichols ([email protected]) is Vice President and National BIM Director at JE Dunn Construction, Kansas City, Mo. bim/virtual design + construction BUILDING TECHNOLOGY laser scanning JE DUNN 9 BEST PRACTICES FOR EFFECTIVE The rendering above depicts a 3D laser scan of a performing arts theater atrium in greyscale format. Laser scanning can benefit all stakeholders on a project. 1. IDENTIFY the intended use of the laser scan data. 2. EDUCATE your customer on laser scanning technology. 3. UNDERSTAND the physical space where laser scanning is being applied. 4. KNOW the project scope. 5. DETERMINE the required deliverable. 6. ESTABLISH project survey control before you start scanning. 7. COLLECT more data than you need, because “more is more.” 8. ASSESS time available to deliver the finished product. 9. FIELD a dedicated, experienced laser scanning team. laser scanning BY THE NUMBERS
Transcript
www.BDCuniversity.com BUILDING DESIGN+CONSTRUCTION MARCH 2015 43
Laser scanning technology continues to gain momentum in the construction industry for its ability to help Building Teams collect tons of highly accurate information in a very short period of time. When done right, laser scanning can prove
benefi cial to all stakeholders throughout the life cycle of a project. In the last two years, JE Dunn has performed 1,450 hours of laser
scanning data collection. Although surveying and scanning is not our primary business, our experience in using laser scanning has defi nitely helped us enhance the quality of our work and our work processes. Here are nine things we have learned about using laser scanning effectively in a wide variety of recent projects.
by trent nIchols, leed ap, JE DUNN CONSTRUCTION
Trent Nichols ([email protected]) is Vice President and National BIM Director at JE Dunn Construction, Kansas City, Mo.
The rendering above depicts a 3D laser scan of a performing arts theater atrium in greyscale format. Laser scanning can benefi t all stakeholders on a project.
1. IdentIfy the intended use of the laser scan data.
2. educate your customer on laser scanning technology.
3. understand the physical space where laser scanning is being applied.
4. Know the project scope.5. determIne the required deliverable. 6. establIsh project survey control before
you start scanning.7. collect more data than you need,
because “more is more.”8. assess time available to deliver the
finished product.9. fIeld a dedicated, experienced laser
scanning team.
laser scanning BY THE NUMBERS
44 MARCH 2015 BUILDING DESIGN+CONSTRUCTION www.BDCnetwork.com
1. IdentIfy the Intended use of the laser scan data.The first step for using laser scanning is identifying how and at what stage of the project the data will be utilized. Assisting the design documentation process? Verify-ing existing conditions? Coordinating the mechanical trades during the construction phases? Verifying as-built post construc-tion? All of the above? Three examples show how this works.
For Kauffman Charter School, a 208,000-sf addition and reconstruction project in Kansas City, Mo., the design team started with old as-built documents. When our firm brought in the laser scan data and compared it to the Revit model provided by the design team, we discov-ered a discrepancy between the location of the columns in the digital model and their actual location in the field.
For a project with Denver-based Swanson Rink engineering consultants, an industry
leader in 3D MEP design, the client re-quested a laser scan of its building to assist in the development of contract documents. By incorporating our post-processed laser scan into the design and shop drawing process, we were able to use prefabrica-tion, shorten the construction schedule, and achieve a higher-quality project.
For Saint Luke’s Hospital, Kansas City, as-built verification was used during the renovation. The data from the laser scan showed the structural elements, mechani-cal piping, duct, cable tray, and sanitary lines that were used to build the model.
2. educate your customer on laser scannIng technology.Laser scanning is wonderful technology that can help you collect a great deal of highly accurate information in a short amount of time, at minimal cost. But it has its limita-tions, and you have to educate your client as to these limitations. Your client must appreciate that laser scanning is line-of-sight technology: it cannot see through walls, slabs, or ceilings. Your client must understand that laser scanning is usually a three-part process—data collection, scan registration, and post-processing/model generation; in most cases, all three must be completed for the technology to be useful, although there are situations where it may be sufficient to perform only the first two steps. (That’s where your team’s expertise comes into play.) Your client must grasp that laser scanning just for the sake of scanning is of little or no value and will result in wasted effort, cost, and data.
With a strong plan and understanding of the technology, you can achieve substan-tial savings for the entire project. “We have probably saved hundreds of thousands of dollars in [reduced] change orders due to using laser scanning early in the process,” according to Dave Leonard, Chief Data Offi-cer of data center provider ViaWest. He cites our firm’s use of laser scanning and BIM to eliminate conflicts with mechanical pipes. “That has been a huge benefit to everyone involved in the process,” he says.
3. understand the physIcal space where laser scannIng Is beIng applIed.Determine the current status of the space needing scanning. Is it interior or exterior space? Occupied or unoccupied? Finished space or demolished wreckage? Laser scanning prior to demolition can be costly and time consuming. If planned ahead, allowing time for scanning after demolition can reduce the time needed for scanning and can keep the project on schedule. La-ser scanning reduces the time required for field investigations as well as the number of unforeseen conditions, reducing the risk of rework and schedule delays during the construction stages of the project.
4. Know the project scope.It’s equally important to be keenly aware of the project’s scope. The value of laser scanning is not limited to complex mechani-cal systems. While building the Community of Christ Church in Independence, Mo., our company used scanning to guide a complex concrete paver layout installed on pedestals. This made it possible for two crews to start work at opposite ends with the confidence that they would meet in the middle, which they did. Providing a clear definition of the scope and flexibility with the format of the deliverable can produce opportunities and value at all stages of the project.
5. determIne the requIred delIverable. There are various types of software platforms used throughout the design and construc-tion industry. If the laser scan deliverable is going to be useful, you have to align the for-mat of the laser scan information with your customers’ expectations. If your designer is working in, say, Revit and you produce a CAD-based deliverable, it’s possible you will lose some of the value of the service. It would be better to deliver a Revit file. In some cases, the design team may be more comfortable working with raw scan data.
The deliverable can even provide added value to the owner. We have helped owners
JE D
UN
N
On-site demonstrations of the laser scanning process can help the client understand how the data is gathered. Pictured: John Ochsner, BIM Specialist with JE Dunn Construction (right), with facility engineers Chris Carter and Tom Jones from a confidential client firm.
www.BDCuniversity.com BUILDING DESIGN+CONSTRUCTION MARCH 2015 45
use our laser scans to showcase their spaces to potential tenants and occupants. The digital model can be used for leasing, marketing, and other post-construction considerations. CyrusOne, an enterprise data center and co-location provider, once used outside marketing firms to develop 3D models of their facilities. After utilizing our laser scanning resources, CyrusOne was able use the 3D scan model to lease space in its data center in Arizona, obviating the need for outside marketing assistance.
6. establIsh project survey control before you start scannIng.For efficient use of laser scanning, establish the project survey control before you do any actual scanning; this will tie the laser scan data into an established or common
project control. This protocol allows you to perform additional scanning at a later date using the same coordinate system. It also ensures the accuracy of the scan relative to the space, and provides a common work point for all contractors during construction.
7. collect more data than you need, because “more Is more.”Once you understand the space that needs to be scanned, the project scope, and the deliverable required, remember this motto: more is more. If you have “holes” in the scan data that you collected you can run into problems. It’s much easier to collect that additional information while you’re there the first time than to go back to col-lect the missing information. To eliminate guesswork in the post-scan process, the more data you collect the better.
In restoring the Kansas Statehouse, in Topeka, our firm utilized laser scanning to assist the architect with the renovation of the roof, perform a cross section of the scan inside the dome, and create a scan view looking up toward the top of the dome. The excess data proved beneficial in completing a smooth historical renovation.
8. assess the tIme avaIlable to delIver the fInIshed product.Every project has a finite amount of time available to perform the work. The data from laser scanning will be of little use if it’s not available at a crucial deadline. After reviewing the project scope, the format of the deliverable needed, and the space that will be scanned, you can then determine if there is sufficient time for laser scanning.
9. fIeld a dedIcated, experIenced laser scannIng team.Using a team that understands laser scanning technology and is sophisticated in the means and methods of construc-tion processes can help ensure success-ful results. The team scanning the project should be familiar with the limitations of the technology and have a firm understanding of the project at hand. These measures have the advantage of establishing the best approach for the specific job, in order to maximize value and minimize cost.
It has been our experience that laser scanning has been most successful when the general contractor leads the process. Because the GC holds the subcontrac-tor contracts, it can better manage the full team and make the scanning output information available on a shared platform to coordinate all mechanical, electrical, plumbing and technology system integra-tions and related subcontractors. We use our Dunn Dashboard to provide access to all digital project data, including laser scan-ning information, to all project stakeholders. As the center of the construction process with design, owners, and trade contractors, it makes sense for the general contractor to lead this process. +
Renderings depict two different laser scans of a performing arts theater atrium. Top: Raw point cloud data displayed in greyscale format. This viewing method is preferred in low-light environ-ments. Above: The same data with RGB color values applied.
