Buildsmart catalogue 2013

Product Catalogue

Angles & Channels 6Channel AccessoriesExpansion, Movement BeadsExternal AnglesExternal AnglesPre-assembled panelsSpacersStarting Channels

Mesh 14Fibreglass Wall Mesh – AdhesiveFibreglass Wall Mesh – Non adhesive

Premium Tools 20Premium FloatsPremium Trowels

Trowels & Floats 24FloatsMixersOther ToolsRaspsTrowels

Tapes 30Cloth tapesEasy Tear polyethylene tapesMasking tapes

Screws & Washers 36Screws - coarse threadScrews - fine threadScrews - fixingWashers

Tools & Accessories 40Glue gunsGlues and solvents

Table of contents

ALU

MINIUM

YE

AR

W A R R A

NT

Y 7

Angles & ChannelsChannel AccessoriesExpansion, Movement BeadsExternal AnglesPre-assembled panelsSpacersStarting Channels

Ang

les

& C

hann

els

6 www.buildsmart.net.au

2003 Aluminium external case bead (Half-Angle)

2004 Aluminium Arch Bead

2006 Aluminium external corner with Holes

2065 Render-Lock Galvanized Angle

Specifications:Designed for window reveals and edge of feature walls. Used to separate render from other finishing materials, like brickwork. When installed correctly is certified for use on seashore residencies and in other extreme environments. Made in Europe to stringent European standards.

Technical details:

Article # Dimensions2003 25 x 12 x 2700 mm2007 25 x 12 x 3000 mm

Specifications:Bead that can be used for any style arch. When installed correctly is certified for external use on seashore residencies and other extreme environments.

Technical details:


Specifications:Extruded Aluminium Angle, perfect for skim coat application, blue-board and other render applications. When installed correctly is certified for use on seashore residencies and other extreme environments.

Technical details:


Specifications:European standard grade 275 micro which can be used in most environments. Intended use for internal and enclosed areas. Buildsmart certifies the build quality of its galvanized angles. Render can be built from 2.5 mm to 12 mm thickness.

Technical details:

Article # Dimensions2065 32 x 32 x 3000 mm

7Hand picked products from around the world

Ang

les

& C

hann

els

2060 Render-Lock Aluminium Angle

2061 Render-Lock Aluminium Angle

2063 Buildsmart Angles with mesh

Specifications:Innovative patented nose design suitable for uneven wall surfaces and allowing for up to 15mm render build. Made in Poland using only high grade aluminium material. As manufacturers, Buildsmart guarantees the quality of its Aluminium angles against rust, rust damage and rust corrosion in all acrylic base render applications. Our aluminium angles are certified for external application in all environments. This includes extreme environments such as: high humidity, industrial pollution, and air borne salt particles and seashore residencies.

Technical details:

Article # Dimensions2060 40 x 40 x 2700 mm2060A 40 x 40 x 3000 mm

Specifications:Patented design & made in Poland using only high grade aluminium material. As manufacturers, Buildsmart guarantees the quality of its Aluminium angles against rust, rust damage and rust corrosion in all acrylic base render applications. When installed correctly is certified for external application in all environments. This includes extreme environments such as: high humidity, industrial pollution, and air borne salt particles and seashore residencies. Depending on how you install the angle, you can build the render from 2.5 mm thickness to 12 mm or 15 mm.

Technical details:

Specifications:Aluminium corner bead with mesh designed to be used for external render application, EPS and Hebal systems. Provides great cover for EPS and Hebal corner joints. Often used to repair existing facade for example to cover corners to fix cracked or cracking corners. Reinforces corners in places of excessive stress. Prevents hairline cracking and strengthens the corner. Also certified for use on seashore residencies and other extreme environments.

Technical details:


Article # Dimensions2061 32 x 32 x 3000 mm 2062 32 x 32 x 2700 mm2066 48 x 48 x 3000 mm2067 48 x 48 x 2700 mm


Ang

les

& C

hann

els

2029 Stop profile for rendering

2031 Window & balcony profile with mesh

2033 Window & balcony profile with mesh

2035 Window profile

Specifications:Stop profile for rendering with fibre glass reinforcement mesh for reveal and closing up of the plaster in the contact insulation system – ETICS, or aerated concrete constructions.• closing up of the plaster in places of transition to a different colour or grain size

• closing up of the plaster in places of transition to a different surface type, e.g. cladding etc.

• particular profile types are adjusted to plasters in all grain sizes

Article # Dimensions Angle2029 50 mm 90° pitch

Specifications:Window profile with an exposed (visible) drip ledge for finishing plaster and water drain-off at the top jambs of building openings in the contact insulation system. The profile is also designated as a balcony profile. It can be used also for the protection of corners and for water drain-off from balconies or terraces.

Technical details:


Specifications:Window profile with an exposed (visible) drip ledge for finishing plaster and water drain-off at the top jambs of building openings in the contact insulation system. The profile is also designated as a balcony profile. It can be used also for the protection of corners and for water drain-off from balconies or terraces.

Technical details:


Specifications:Window profile without an exposed drip ledge (hidden under plaster of render), with glass fibre reinforcement mesh for plaster finishing and water drain-off at the top jambs of building openings in the contact insulation system – ETICS. The profile is also designated as a balcony profile. It can be used also for the protection of corners and water drain-off from balconies or terraces.



Ang

les

& C

hann

els

2037 Sill profile

2038 Window profile, 6mm

2069 Arch corner with insulation

2068 Flexible corner profile with mesh, 25m

Specifications:Sill profile with fibre glass reinforcement mesh and foam tape to ensure expansion jointing of the sill profile to the heat-insulating material in the contact insulation system – ETICS.• provides inseparable expansion jointing of the sill profile with the insulating material

• prevents penetration of cold and noise• protects the system against weather effects

• protects hairline cracking in point of joint

Article # Dimensions2037 100 x 2000 mm

Specifications:The 6 mm profile with fibre glass mesh is used for creating an expanding connection of the window (door) frames to plaster/rendering in the contact insulation system – ETICS.• prevents the final coating from flaking off the window or door frame• protects window or door frames and panels against mechanical damage• prevents hairline cracking• prevents penetration of cold and noise


Specifications:Arch corner for insulation for the protection of arch edges ofvarious radius in the contact insulation system – ETICS.• Alkali-proof PVC, fibre glass reinforcement mesh Vertex• protection of corners against mechanical damage• prevents hairline cracking• creates an ideal arch edge

Technical details:


Specifications:Corner profile with mesh with a variable angle and roll package of 25 m for reinforcing all window or door corners, edges and jambs in the contact insulation system – ETICS. • Alkali-proof PVC, fibre glass reinforcement mesh Vertex• protection of corners from mech. damage• prevents hairline cracking• creates an ideally straight corner

Technical details:

Article # Dimensions2068 100 x 100 mm x 25 m


Ang

les

& C

hann

els

2080 Aluminium starting channel, 90° pitch

2080A Aluminium starting channel, 25° pitch



Specifications:Patented EU Aluminium Starting channel 90° Pitch – Buildsmart Designed Starting Channels for use above any angled surface including Roof lines and second storey structures. Has a lip to Build render, allowing for a clean finish and a professional aesthetic look. Has Drip holes to allow for moisture build-up. Reduces the risk of the corners breaking off. When installed correctly is certified for external application in all environments.Technical details:


Specifications:BuildSmart patented design aluminium starting channel 25° pitch for use above any angled surface including roof lines and second storey structures. Has a reveal to build a render, allowing for a clean finish and a professional aesthetic look. Has drip holes to avoid for moisture build-up. Reduces the risk of the corners breaking off. When installed correctly is certified for external application in all environments. Technical details:

Article # Dimensions Angle2080A 50 x 2500 mm 25° pitch

Specifications:EU Aluminium Starting channel 90° Pitch – Buildsmart Designed Starting Channels for use above any angled surface including Roof lines and second storey structures. Has a lip to Build render, allowing for a clean finish and a professional aesthetic look. Has Drip holes to allow for moisture build-up. Reduces the risk of the corners breaking off. When installed correctly is certified for external application in all environments. Technical details:





Ang

les

& C

hann

els

2084 Closing profileSpecifications: Closing profile with a drip ledge used at the top of the insulation system to close such a system and prevent water from getting behind the insulation.

Material: natural aluminium, alloyed

Application:• firm and effective closing of the insu-

lation system at its top part

• the profile shape incl. drip ledge drains water off the system in an effective way and prevents capillary rise towards the insulation material

• prevents water from getting behind the insulation material in

• case of different thermal insulation widths (floors with different thickness of insulation)

• it can substitute window sill and/or balcony profiles in particular cases

• perfect structural and visual finish and closure of the system

Technical details:Article # Dimensions2084 75 x 2000 mm2085 75 x 2500 mm2086 75 x 2000 mm2087 75 x 2500 mm



Specifications:Patented EU Aluminium Starting channel 90° Pitch – Buildsmart Designed Starting Channels for use above any angled surface including Roof lines and second storey structures. Has a lip to Build render, allowing for a clean finish and a professional aesthetic look. Has Drip holes to allow for moisture build-up. Reduces the risk of the corners breaking off. When installed correctly is certified for external application in all environments. Technical details:





Ang

les

& C

hann

els

2075 Wall Spacer

Polystyrene sheet for 25° Pitch:

Article # Dimensions2083 50 x 240 x 2500 mm2093 75 x 240 x 2500 mm2103 100 x 240 x 2500 mm

Specifications:Wall spacer to straighten or pack crooked frames. Used for installing channels against uneven surfaces.

Technical details:

Article # Dimensions2075 2 mm2076 3 mm2077 4 mm2078 5 mm2079 8 mm

2081A Aluminium starting channel, 25° PitchSpecifications:This channel is pre-assembled with a polystyrene M-Grade sheet cut to size ready for installation, allowing for a quick and easy installation. The channel is assembled with 100 mm overlap of the EPS sheet to eliminate direct joints during installation as shown in the picture. Buildsmart patented 25° pitch starting channels should be used above any angled surface including roof lines in all second story structures. Has a reveal to build render, allowing for an easy and clean finish creating a professional aesthetic look. Has drip holes to avoid moisture build-up. Reduces the risk of the corners breaking off.

Technical details:

Article # Dimensions2081A 50 x 240 x 2500 mm 2091A 75 x 240 x 2500 mm2101A 100 x 240 x 2500 mm

2082 Base profile 90°Specifications:Base profile without a drip ledge is used for ending/closing up insulating material at its sides or for closing the system in its top part. This profile cannot be used in situations where the rainwater drainage from the system must be ensured. Specially designed front edge for facade layer of 4mm

Technical details:

Article # Dimensions2082 50 x 2500 mm 2092 75 x 2500 mm2104 100 x 2500 mm


Ang

les

& C

hann

els

2526 Expansion Joint or Movement Bead with Fiberglass reinforcement meshSpecifications:Continuous movement/expansion bead with fiberglass reinforcement mesh. Prevents wall cracking and prevents penetration of moisture under the insulating material. This design allows for maximum wall movement without causing any cracking. The rubber textile centre prevents any penetration of moisture.

Technical details:


2520 Catnic Expansion/ Movement bead. Made in England

2525 EU Aluminium Expansion Joint / Movement Bead with Fibreglass reinforcement mesh

Specifications:Catnic Expansion/ Movement bead. Allows for up to a 12 mm build in render. Buildsmart certified for use on seashore residencies and other extreme environments.

Technical details:


Specifications:Aluminium continuous movement/expansion bead with fibreglass reinforcement mesh. Prevents wall cracking and prevents penetration of moisture under the insulating material. This design allows for maximum wall movement without causing any cracking. The rubber textile centre prevents any penetration of moisture.

Technical details:


2040 Reinforcement corner mesh, vertex 160g, 4 x 4 mmSpecifications:Reinforcement corner mesh for reinforcement of the composite insulation system – ETICS or interior or exterior plasters.

Application:• corner reinforcement of window and

door jambs• in both vertical and horizontal

direction• easy and fast application; better

labour efficiency

Technical details:

Article # Dimensions2040 350 x 300 x 200 mm2041 650 x 330 mm

MeshFibreglass Wall Mesh – AdhesiveFibreglass Wall Mesh – Non adhesive


Mes

h1011 Self-Adhesive Alkaline Resistant Fiberglass Mesh

1040 Self-Adhesive Alkaline Resistant Fiberglass Mesh

1045 Self-Adhesive Alkaline Resistant Fibreglass Mesh

1059 Self-Adhesive Alkaline Resistant Fibreglass Mesh

Specifications:Self adhesive Alkaline Resistant Fibreglass mesh. It has excellent properties like high alkali-resistance, good cohesion, flexibility, tensile strength, increases overall wall strength and prevents cracking. Compatible with all external façade systems.

Technical details:

Article # Dimensions Details1011 1 m x 50 m 5 x 5 mm1021 1 m x 50 m 10 x 10 mm

Specifications:Self adhesive Alkaline Resistant Fibreglass mesh. It has excellent properties like high alkali-resistance, good cohesion, flexibility, tensile strength, increases overall wall strength and prevents cracking. Compatible with all external façade systems.

Technical details:

Article # Dimensions1040 1.195 m x 50 m 5 x 5 mm

Specifications:Self adhesive Alkaline Resistant Fibreglass mesh. It has excellent properties like high alkali-resistance, good cohesion, flexibility, tensile strength, increases overall wall strength and prevents cracking. Compatible with all external façade systems. Core size is 70 mm. Designed for pre-coated panel systems.

Technical details:

Article # Dimensions1045 1.195 m x 200 m 5 x 5 mm

Specifications:Alkaline Resistant Self-adhesive Fibreglass mesh. It has excellent properties like high alkali-resistance, good cohesion,flexibility, tensile strength, increases overall wall strength and prevents cracking. Self-adhesive mesh allows for mesh application direct to the panels where it is specified. Compatible with all external façade systems.

Technical details:

Article # Dimensions1059 100 mm x 50 m 5 x 5 mm


Mes

h




Specifications:Self adhesive Alkaline Resistant Fiberglass mesh. It has excellent properties like high alkali-resistance, good cohesion, flexibility, tensile strength, increases overall wall strength and prevents cracking. Compatible with all external façade systems 150 mm x 50 m.

Technical details:

Article # Dimensions Details1060 200 mm x 50 m 5 x 5 mm1061 150 mm x 50 m 5 x 5 mm

Specifications:External Self-adhesive Alkaline resistant Blue-board Tape 55 mm x 50 m.

Internal Alkaline resistant Self-adhesive Jointing Tape, 50 mm x 90 m.

Technical details:

Article # Dimensions1071 55 mm x 50 m 5 x 5 mm1072 50 mm x 90 m 4 x 4 mm

Specifications:Self adhesive Alkaline Resistant Fiberglass mesh. It has excellent properties like high alkali-resistance, good cohesion, flexibility, tensile strength, increases overall wall strength and prevents cracking. Compatible with all external façade systems.

Technical details:

Article # Dimensions1082 200 mm x 50 m 10 x 10 mm1083 100 mm x 50 m 10 x 10 mm


Mes

h1000 Alkaline Resistant Fibreglass MeshSpecifications:Alkaline Resistant Non-adhesive Fibreglass mesh. It has excellent properties like high alkali-resistance, good cohesion, flexibility, tensile strength, increases overall wall strength and prevents cracking. Compatible with all external façade systems.

Technical details:

Article # Dimensions Details1000 200 mm x 50 m 5 x 5 mm1005 150 mm x 50 m 5 x 5 mm1006 125 mm x 50 m 10 x 10 mm1007 100 mm x 50 m 10 x 10 mm1010 1 x 50 m 5 x 5 mm1015 250 x 50 m 5 x 5 mm1020 1 x 50 m 10 x 10 mm


Mes

h

1050 Alkaline Resistant Fibreglass Mesh

1065 Premium European Alkaline Resistant Fibreglass Mesh

1073 Alkaline Resistant Fibreglass Mesh

Specifications:Alkaline Resistant Non-adhesive Fibreglass mesh. It has excellent properties like high alkali-resistance, good cohesion, flexibility, tensile strength, increases overall wall strength and prevents cracking. Compatible with all external façade systems. Core size is 70 mm. Designed for pre-coated panel applications.

Technical details:

Article # Dimensions Details1050 1.185 x 50 m 5 x 5 mm1055 1.185 x 200 m 5 x 5 mm

Specifications:Premium European Alkaline Resistant Non-adhesive Fibreglass mesh. It has excellent properties like high alkali-resistance, good cohesion, flexibility, tensile strength, increases overall wall strength and prevents cracking. Compatible with all external façade systems. Made in Europe.

Technical details:

Article # Dimensions Details1065 1.185 x 50 m 5 x 5 mm1066 1.185 x 200 m 5 x 5 mm

Specifications:External Non-Adhesive Alkaline resistant Blue-board Tape.

Technical details:

Article # Dimensions1073 50 mm x 50 m

Premium ToolsPremium FloatsPremium Trowels


Prem

ium

Too

ls0111 Mini Plastic Float Triangular Tip

0321 Plastic Float with Aluminium Bracket and BiKo HANDLE® CORK

0329 Plastic Float with BiKo HANDLE® CORK

0305 Premium Stainless Steel Finishing trowel with BiKoHANDLE® Premium Cork Handle

Specifications:Mini plastic float – Ideal for touch-ups and small spaces. Thickness 3 mm, Shaped Edges. Made in Germany.

Technical details:


Specifications:3 mm thickness with shaped edges – the plastic is the highest quality available. The benefit of this is less rework is required and no striae on the surface. The surface of the trowels is smooth. Made In Germany.

Technical details:


Specifications:2 mm thickness allows for greater flexibility in the float. The plastic is the highest quality available and has been developed to follow the natural circular motion of the float. The benefit of this is that less rework is required and no striae marks on the surface. The surface on the smoothing trowel is a slightly worn in finish to achieve perfect results. Made In Germany.

Technical details:


Specifications:Blade made from High Grade Stainless Steel. Aluminium bracket with BiKo HANDLE® CORK. These professional trowels are manufactured with state of the art machinery in Germany.

Technical details:



Prem

ium

Too

ls

0308 Premium Stainless Chrome Steel Finishing Trowel with BiKoHANDLE® Premium Cork HandleSpecifications:Blade made from special Stainless Chrome Steel for greater flexibility, underside grinded, blade pre-bent slightly, broken-in edges for immediate use, 14 oversized stainless bolts for extra strength, Aluminium bracket with BiKo HANDLE® CORK. This professional trowel is manufactured with state of the art machinery in Germany.

Technical details:

Article # Dimensions0308 375 x 120 mm0309 455 x 120 mm

Specifications:Stainless steel finishing trowel, Blade made from High Grade Stainless Steel. Aluminium bracket with BiKo HANDLE® CORK. This professional trowel is manufactured with state of the art machinery in Germany.

Technical details:


0307 Premium Stainless Steel Finishing trowel with BiKoHANDLE® Premium Cork Handle

Trowels & FloatsFloatsMixersOther ToolsRaspsTrowels


Trow

els

& F

loat

s0106 PolyFloat

0107 PolyFloat Triangular Tip

0301 Plastic Grey Textured float.

0313 Stucco Sponge Float Soft

Specifications:White Poly Float used for finishing texture.

Technical details:


Specifications:White Poly Float used for finishing texture.

Technical details:

Article # Dimensions0107 320 x 180 mm0108 350 x 205 mm

Specifications:Plastic Grey Textured float.

Technical details:


Specifications: 20 mm thickness, Sponge Float, Soft used to sponge wet.

Technical details:



Trow

els

& F

loat

s

0375 Plastic float with red handle

0380 Triangle Plastic Float

0398 Sponge Float Stucco Finish Hard

0399 Sponge Float Stucco Finish Ultra Smooth

Specifications:Used to float texture.

Technical details:


Specifications:Suitable for surface repairs, this is a one piece finishing trowel.

Technical details:


Specifications:15 mm thickness, hard sponge float, stucco finish

Technical details:


Specifications: 20 mm thickness. Sponge Float, Stucco Finish, Ultra Smooth.

Technical details:

Article # Dimensions0399 280 x 140


Trow

els

& F

loat

s0461 Small Stainless Trowel

0499 Small Triangular Stainless Trowel

0335 Abrasive ‘Rasp’ Metal Scraper


Specifications:Made of stainless steel, 0.65 mm thickness for small finishing touches. Handle made from two component plastic on aluminium foot.

Technical details:

Article # Dimensions0461 80x200 mm

Specifications:Made of stainless steel, 0.65 mm thickness for small finishing touches. Handle made from two component plastic on Aluminium foot. Triangular tip.

Technical details:


Specifications:Used for shaping raw polystyrene, and eliminating imperfections in the EPS system. Made from perforated steel pad with plastic handle.

Technical details:


Specifications:Used for shaping raw polystyrene, and eliminating imperfections in the EPS system. Made from perforated steel pad with plastic handle.

Technical details:



Trow

els

& F

loat

s

0341 Abrasive ‘Rasp’ Plastic Scraper


1418 Metal Wall Scrapper

Specifications:Used for shaping raw polystyrene, and eliminating imperfections in the EPS system. Made from perforated moulded plastic pad with plastic handle.

Technical details:


Specifications:Used for shaping raw polystyrene, and eliminating imperfections in the EPS system. Made from perforated steel plastic pad with rubber handle.

Technical details:


Specifications:Metal Wall Scrapper used to roughen up polystyrene where required.

Technical details:

Article # Dimensions1418 130 mm x 275 mm


Trow

els

& F

loat

s1401 Render scrubber

0105 Water Brush

1216 Paint Mixer

1217 Render Mixer

Specifications:Used to smooth and scrape rendered surfaces and well as cleaning and preparing walls. Heavy duty welded handle and frame.

Technical details:

Article # Dimensions1401 150 mm x 290 mm

Specifications:Used to splash water on render and used to clean tools. Has a screw-in handle – made in Europe.

Technical details:

Article #0105

Specifications:European Design Paint mixer made from moulded design material. Zinc coated rod.

Technical details:

Article # Dimensions1216 600 mm

Specifications:European Design Paint mixer made from moulded design material. Zinc coated rod.

Technical details:

Article # Dimensions1217 600 mm

TapesCloth tapesEasy Tear polyethylene tapesMasking tapes


Tape

s1412 Orange Rough Surface Render Cloth Tape

1415 Green Smooth Surface Render Cloth Tape 30 Days

Specifications:This specially designed tape has strong adhesion and will stick to surfaces where most tapes will fail. Sticks to all rough surfaces including Brick, masonry, Render and concrete. Adhesive duration of the tape varies on application and conditions. Has a strong UV PVC protective layer. Made in Europe to strict European standards.

Technical details:

Article # Dimensions1412 25 mm x 25 m1413 38 mm x 25 m1414 48 mm x 25 m

Specifications:This specially designed tape will stick to all smooth surfaces and slightly rough surfaces, uses include glass, masonry, vinyl, aluminium and various other materials. Designed for hot and humid conditions. Adhesive duration of the tape is tested for Australian climate conditions and can be used on surfaces for up to 30 days leaving no adhesive residue (varying on application and conditions). Has a strong UV PVC protective layer. Easy to tear. Made in Europe to strict European standards.

Technical details:



Tape

s

6100 Blue cloth tape

6501 PE/Render Tape

6505 PE/Render Tape – Easy Tear Tape

Specifications:7 day cloth tape.

Technical details:

Article # Dimensions6100 24 mm x 25 m6150 30 mm x 25 m6200 36 mm x 25 m6300 48 mm x 25 m

Specifications:This tape will stick to all smooth surfaces, including glass, masonry, vinyl, aluminium and various other materials. Adhesive Duration of the tape is tested for Australian climate conditions. Can be used on surfaces for up to 30 days leaving no adhesive residue (varying on application and conditions). Has a strong UV PVC protective layer. Made in Europe to strict European standards.

Technical details:


Specifications:This tape will stick to all smooth surfaces, including glass, masonry, vinyl, aluminium and various other materials. Adhesive Duration of the tape is tested for Australian climate conditions. Can be used on surfaces for up to 30 days leaving no adhesive residue (varying on application and conditions). Has a strong UV PVC protective layer. Made in Europe to strict European standards. Has small rippled edge to tear tape with ease.

Technical details:



Tape

s1409 Paper Masking Tape

6500 PE/Render Tape 60 days

6509 Green Masking Tape (Paint Blockers) for Razor Sharp Edges 30 Days

Specifications:Non-solvent, specially modified UV stable adhesive. Applications for painted walls & trims, Glass, plastic, metal and aluminium frames. Suitable for Render masking. 7 Days clean removal.

Technical details:


Specifications:This tape is designed to last up to 60 days on any smooth surface without leaving residue. Ideal for commercial sites. 6501

Technical details:

Specifications:This tape will stick to all smooth surfaces, including glass, masonry, vinyl, aluminium and various other materials. Adhesive Duration of the tape is tested for Australian climate conditions. Can be used on surfaces for up to 30 days leaving no adhesive residue (varying on application and conditions). Has a strong UV PVC protective layer. Made in Europe to strict European standards. Has small rippled edge to tear tape with ease.

Technical details:



Tape

s

0103 Self-Adhesive Bitumen Tape, 25m

0102 Heavy Duty ABS Rubberised measuring tape

0104 Nickel-plated aviation tin snips, 254mm/10”

Specifications:All purpose weatherproof sealing tape that adheres permanently to clean dry surfaces including: Metals, Brick, CementPVC, Timber, Glass, Fibreglass, Window construction.

Technical details:

Article # Dimensions0103 1.2 x 75 mm x 25 m

Specifications:Measures in MM. De-burred edges to reduce wear and prevent corrosion. Nylon coated covering the entire surface blade reducing wear and abrasion also reducing wear increasing Durability. Includes magnetic and wide tip for easy attachment. Includes 2 brake buttons. 8m total length. 25 mm width.

Technical details:


Specifications:Cuts up to 1.2mm steel. Straight cut, drop forged, heat treated cutting edge, comfort grip handle.

Technical details:

Article # Dimensions0104 254 mm (10”)


Tape

s6516 Anti-Dust CurtainSpecifications:A ground-breaking new technology. The edges of the tape are treated with an inhibitor, which when it comes in contact with paint makes a micro barrier. This chemical barrier prevents paint bleeding and results in very sharp lines.

Technical details:

Article # Dimensions6516 100 x 215 m

Screws & WashersScrews – coarse threadScrews – fine threadScrews – fixingWashers


Scre

ws

& W

ashe

rs5046 Square drive Poly Screws Course Thread

5050 Square drive Poly Screws Fine Thread self-tapping

Specifications:Class 4 Poly Screws with a square drive head, has a course thread suited for application into wood frame system – Dacromet coated, this screw has a much harder coating and strong coating over Galvanised coatings, exceeding Australian Standards. Used for installation of all EPS systems on the Australian market. To suit 50 mm Boards.

Technical details:

Article # Dimensions5046 75 mm5047 100 mm5048 125 mm5049 150 mm

Specifications:Class 4 Poly Screws with a square drive head, has a fine thread suited for application into metal frames has a self-taping head for easy installation – Dacromet coated, this screw has a much harder coating and strong coating over Galvanised coatings, exceeding Australian Standards. Used for installation of all EPS systems on the Australian market. To suit up to 85 mm Boards.

Technical details:

Article # Dimensions5050 100 mm5051 125 mm


Scre

ws

& W

ashe

rs

2102 Plastic Anchor Fixing screw

0710 Red Nylon Washer / Blue / Green Nylon Washer

Specifications:For fixing light objects into heat-insulating plates and EPS systems. Can easily be screwed through the plaster/render layer of EPS. Has a high load capacity 20-25kg.

Technical details:


Specifications:The larger Diameter of this washer allows for better Raw EPS (Expanded Polystyrene insulation) installation.

These washers have a screw lock-in system allowing for an easier installation. This washer is designed for pre-coated panel systems but can also be used for raw EPS systems.

Important: Washers designed for raw polystyrene only, recommended 12 buttons per m² with each button patched before undercoating. Do NOT indent washer into surface more than 2mm, should be mounted flush. Overdriving will damage the washer.

Technical details:


Tool

s &

Acc

esso

ries

Tools & AccessoriesGlue gunsGlues and solvents

Tool

s &

Acc

esso

ries


Tool

s &

Acc

esso

ries

1510 Metal Scoop – wooden handle

1510A Metal Scoop

1304 Aluminium Straight Edge Derby Float

1308 Aluminium Straight Edge Derby Float ‘H’ Type

Specifications:With a wooden handle and a metal frame. Includes a hook to hang on to a bucket or rail.

Technical details:

Article # Product1510 Metal Scoop

Specifications:Ideal for scooping render out of buckets without leaning over and avoid straining your back. Made of stainless steel.

Technical details:

Article # Product1510A Metal Scoop

Specifications:Heavy duty design Feather tip straight edge made from European grade Aluminium, perfect to screed walls and straight uneven surfaces. 1000 mm Length.

Technical details:


Specifications:Heavy duty design ‘H Type’ straight edge made from European grade Aluminium, perfect to screed walls and straight uneven surfaces. 1000 mm Length.

Technical details:


Tool

s &

Acc

esso

ries


Tool

s &

Acc

esso

ries

Tool

s &

Acc

esso

ries

1530 Plastic Scoop

5158 Professional Foam Gun PG-2

5192 Professional Caulking Gun

Specifications:Has a strong hold design to withstand a heavy load and is very cost effective . Perfect for scooping texture and watery mixtures. Includes a hook to hang on to a bucket or rail. Made in Europe to stringent European standards.

Technical details:

Article # Product1530 Plastic Scoop

Specifications:Professional grade foam glue gun with a Teflon coated nozzle ensuring smooth and even flow, also extending gun life. Has adjustable toggle at rear to control desired level of flow. Proper gun maintenance will ensure long life.

Technical details:

Article #5158

Specifications:9inch Professional Caulking gun. Suits all adhesive tubes to 420g.

Technical details:

Article # Dimensions5192 228 mm (9”)

Tool

s &

Acc

esso

ries


Tool

s &

Acc

esso

ries

Tool

s &

Acc

esso

ries

5162 Bosman Low Expanding Glue Foam 750 ml

5163 Bosman Low Expanding Glue Foam – with Nozzle 750 ml

5164 Bosman Foam Cleaner 500 ml

Specifications:Ready to use Elastic Polyurethane foam adhesive designed for use to bond sub straights, Seal around windows, doors, walls floors and ceilings. Can be applied to any surface. Has High adhesion and good flexibility. Used to install EPS wall systems, Base channels, Aluminium Angles and create seals. Has Universal gun mount.

Technical details:

Article # Dimensions5162 750 ml

Specifications:Ready to use Elastic Polyurethane foam adhesive designed for use to bond sub straights, Seal around windows, doors, walls floors and ceilings. Can be applied to any surface. Has High adhesion and good flexibility. Used to install EPS wall systems, Base channels, Aluminium Angles and create seals. Has Nozzle for easy to use foam dispensation.

Technical details:


Specifications:Designed to clean out and maintain Foam guns and to dissolve any excess foam. Not intended to clean foam that is already cured. Has Universal gun mount.

Technical details:


WWW.BUILDSMART.NET.AU

TEL: (03) 9791 4106FAX: (03) 9793 5063

[email protected]

12 Venture CourtDandenong, Victoria. 3175

Australia

Date post:	07-Mar-2016
Category:	Documents
Upload:	buildsmart
View:	218 times
Download:	2 times

Buildsmart catalogue 2013

Documents