Bureau Veritas Oil & Gas ExpertiseDecember 2011

Artur SrokaIndustry Department Director

2www.bureauveritas.pl

Bureau Veritas at a Glance

► Created in 1828, Bureau Veritas is a global leader in conformity assessment and certification services in the areas of quality, health and safety, environment and social responsibility (QHSE)

2009 revenue: €2.65bn

2009 adjusted operating profit: €433m

More than 900 offices in 140 countries

► Over 47,000 skilled employees

► A global network comprising more than 900 locations within 140 countries

► Seven global businesses providing a complete set of services

Inspection, testing, audit, certification, risk management, outsourcing, consulting and training services

► Servicing 370,000 customers across a wide range of end markets

3www.bureauveritas.pl

Oil & Gas: a long experience built on robust references

ADNOCDrilling services

LAGGAN & TORMOREGPP & SPS Verification services

Pipeline packages certification

TOTAL EM&IInspection & Integrity Management

GOLIATThird Party Verification Authority

(TPVA)

BPClassification

SniffingSupplier Assessment

GRUPA LOTOSProgram 10+; Second Party Site

Inspection (3 installations)

POLSKIE LNGVerification of safety analysis of LNG

terminal in Swinoujscie

NORTH / BALTIC SEA

BRAZILPETROBRAS

Integrity ManagementGlobal Shop Inspections & Expediting

ClassificationCertification of ships, offshore floating

units and marine equipmentQMS Certification

Regulatory ComplianceSafety Assessment & Consulting

Environmental Performance

MIDDLE EAST

INDIA

WEST AFRICAPAZFLORFEED stage certification activitiesType approval

ANGOLA Bitumen Tank FarmDesign ReviewQA/QC Inspections

GIRASSOLFugitive Emissions of VOC monitoring

KASHAGAN QA/QC services

SAKHALIN II PipelineQA/QC Services, Welding NDT

SHTOKMANFEED stage certification & verification activities. Artic Environment

RUSSIA & Central ASIA

CHINASHANGHAI LNG receiving terminal and Subsea pipelineDesign ApprovalSite supervisionGlobal shop inspectionConsulting

AUSTRALIABLACKTIP Project (offshore)Certifying Authority ServicesIndependent Verification

NORTH WEST SHELF HUBIRC Global Risk Management

Queensland Gas C. pipeNDT

KDG6 Onshore Terminal projectThird Party inspection services

ONGC PlatformsRe-Certification of under water structures, topside of Process Complex, Certification of equipments, pipelines and structures, HAZID, HAZOP, QRA, SIL studies, Third party Inspection services

4www.bureauveritas.pl

Bureau Veritas Technical Centres Network is the backbone of the engineering expertise of the Group, bringing to our Clients’ doorstep the best of Bureau Veritas’ knowledge in terms of design compliance appraisal and verification, asset integrity management, risk and safety studies. Nevertheless local offices are your first contact point to begin cooperation.

Supported by a worldwide technical expertise

Each Technical Center is equipped with powerful software and works along the latest International Codes and Standards (BS, API, ASME, ANSI, etc.).

Warsaw / Poland your local partner

5www.bureauveritas.pl

Encompassing a dedicated range of services

Classification is the appraisal of the level of compliance of a vessel to the rules set up by the class society.

Classification rules are developed to contribute to the structural strength and integrity of essential parts of the hull, the safety and the reliability of the propulsion and steering systems and the effectiveness of essential auxiliary systems of the ship. Bureau Veritas classes all types of ships and offshore floating units: oil tankers, bulk carriers, passenger ships, containerships, gas carriers, offshore supply vessels, tugs and many others.

Classification

Design Review is an independent assessment of the project engineering phase that can be supplemented with independent analyses, performed by our specialist engineers.

The safe design of all types of equipment, offshore facilities (structures and topsides), onshore plants (from refineries to LNG terminals) and pipelines, in standard or extreme conditions (from desert to arctic environments), can be assessed through certification or verification schemes to suit our clients' requirements.

Verification is a scheme through which Bureau Veritas, as an Independent Verification Body (IVB), provides Independent Competent Persons (ICP) to verify throughout the life of an installation that the performance standards, defined by the client for each Safety Critical Element (SCE), are achieved.

Defined originally within UK North Sea regulations, the implementation of such schemes has become common industry practice in key areas of the Oil and Gas world, such as the Middle East, Russia and Asia.

Bureau Veritas’ ICP workforce is deployed and operates on large verification projects in all these areas.

VerificationDesign Review

Case studies are detailed in Appendix

Case StudyHasdrubal project BG

Tunisia

Risk Evaluation & Management is defined as the assurance that threats to integrity are identified and properly addressed during the asset whole lifecycle.

Risk Evaluation relies on the performance of HAZID / HAZOP workshops, qualitative and quantitative risk assessment, Fire & Explosion Risk Assessment, Smoke & Toxic dispersion studies, Escape, Evacuation Rescue Analysis,

Safety Integrity Level analyses for Instrumented Protective Functions are performed; certification of HIPS systems can be delivered.

Bureau Veritas’ network of Technical Centers deliver such studies using modeling and risk assessment tools like: PHAST Risk, LEAK, PHA Pro, EFFECTS, CFX, FLACS, Optimise (home tool for RAM studies), etc,.

Risk Evaluation & Management

Case StudyShtokman

SDAG Russia

Case StudyHasdrubal project BG

Tunisia

FEEDFront-End Engineering & Design

Detailed Design

Inve

stm

ent

Dec

isio

n

6www.bureauveritas.pl

Encompassing a dedicated range of services

Certification of Installations means the assurance that it has been designed, constructed, commissioned and is operating in compliance with a defined technical reference as far as safety is concerned.

Certification is by far the most recognised and commonly delivered service provided by Bureau Veritas worldwide as an Independent Third Party.

Compliance: some countries or zones have specific compliance criteria that are a challenge for all corporations.

Bureau Veritas helps clients to ensure the compliance of products and assemblies with local and/or international regulations through:

• Support as a second party

• Certification as an independent third party

• Product compliance studies

• Compliance market "intelligence"

Certification

Compliance

Construction / Procurement / Commissioning

Supplier Assessment is a decision tool for purchasers coping with suppliers qualification in consideration of their capabilities to manufacture specified industrial components or provide services.

Bureau Veritas typical deliverable is a gap assessment or analysis report including recommendations to move forward and follow-up suggestions.

Supplier Assessment

Shop Inspection involves inspecting items at their place of manufacture before delivery.

Our qualified local teams are familiar with inspecting all kinds of supplies: materials and components, pressure equipment, mechanical equipment and machinery, electrical equipment regarding applicable regulations or other specific requirements.

Shop / Site InspectionCase Study

Total CTG

Case Study

Grupa Lotos

7www.bureauveritas.pl

All along your project life cycle

Risk-Based Inspection is a process that identifies, assesses and maps potential equipment failures (e.g.: corrosion and stress cracking).During the RBI process, Bureau Veritas engineers design inspection strategies (what, when, where, how to inspect) that match forecasted or observed degradation mechanisms.Risk-Based Approach applies to:• Pressure vessels• Pipelines• Tanks• Structures

Fugitive emissions are generated by leaks from process equipment such as valves, flanges, piping.This can result in safety, health, environmental and reputation concerns. Cost implications can be significant.Thanks to its methodology, Bureau Veritas can set a robust fugitive Leak Detection And Repair program which will provide tangible benefits.Bureau Veritas Fugitive emission monitoring complies with the EPA and European standards.

Non destructive testing covers the whole range of analysis techniques used in industry to evaluate the properties of a material, equipment or system without causing damage

Bureau Veritas is a highly recognised worldwide provider of Non Destructive Testing services in both Capex and Opex context for structural steel, process piping, pipelines, vessels, etc. using routine and advanced techniques and technologies.

RBI Fugitive emissions NDT

Operation

Chemical Risk Management and Safety Data Sheets

This is a core competence of Bureau Veritas HSE Team, constantly monitoring rules and regulations, and working with clients, ensuring compliance and minimizing risk for employees, environment and society.

We offer specialist services and tools to follow safety data sheets, and chemicals throughout the value creation chain.

Our competence and software solution ('CHESS') is used by major players in the Oil and Gas industry.

Chemical Risk

Project

Lifecycle

Risks must be identified in order to protect plant workers, the people in the surrounding area, the environment and the plant itself. This requires a Quantified Risk Assessment to demonstrate that risk levels are within the defined criteria and are tolerable.

See p.6 Risk Evaluation & Management

QRA

REACH European Regulation sets the measures applicable to the manufacture, importation, sale and use of over 100 000 chemicals.

This Bureau Veritas offers a full range of services in order to assist manufacturers, importers and downstream users with the implementation of this complex regulation:• Training• Diagnosis of REACH impact• Assistance for downstream

users• Technical assistance for late pre-

registration• Technical assistance for

registration• Substances of Very High

Concern (SVHC) management• Technical and legal Consortium

management

Case StudyBP

Gelsenkirchen

REACH assistance

8www.bureauveritas.pl

Appendix – Case Studies (1)

Bureau Veritas is providing design review services to BG Tunisia for its Hasdrubal Project in the Mediterranean Gulf of Gabes. The project includes a Normally Unmanned Installation (NUI) connected by 110km of pipeline to a new receiving installation on the coast of Tunisia south of Sfax.

BG Tunisia is following the design review “verification” process, which is now recognised by many international operators as the best practice within the oil industry. Bureau Veritas’ experience in its worldwide network of Technical Centres confirms the global trend towards adoption of its goal-setting philosophy.

BG Tunisia’s approach is not driven by regulations. Instead they require third party checks for their own assurance. The design verification process ensures confidence that all safety critical elements are correctly designed.

Design Review

Bureau Veritas Poland provided in 2008/2009 to Polskie LNG Sp. z o.o. a strategic mission for Independent Verification Body Services during the FEED phase of Project of LNG Terminal in Swinoujscie.

Due to the innovative nature and extreme conditions of the project, Polskie LNG has decided to involve Bureau Veritas as Independent Verification Body for optimisation analyses and safety analyses in the context of the applicable international and local regulations and standards.

The scope of IVB covers:

- technical review (documentation review/comments) of the optimisation analyses,

- review of the documentation prepared as part of safety analyses (including QRA, HAZID, HAZOP and fire prevention systems)

- review of other safety aspects related to the LNG Terminal projects.

Independent Verification

Total – A technical supplier assessment program has been launched in august 2009 following Kharyage experience and ended in December 2010. During this period, 60 suppliers throughout 12 countries (which included China, India, South East Asia, Middle East and Eastern Europe) were audited.Covered Equipment: Boilers, pressure vessels, exchangers, valves, commodities, electrical components…Services provided to Clients:• Tailored questionnaires,• Program coordination

and scheduling (for both Total and BV assessors),

• Performance auditing• Reporting and decision

preparation

Benefits for Client:• Turn-key program

organization• Expertise in QMS and

auditing process• Commitment of the BV

local network• Timely resource

management

Supplier Assessment

BP Gelsenkirchen - BP Gelsenkirchen* requirement was to achieve compliance with EU Directive IPPC 96/61/EG (Control of VOC Fugitive Emissions) converted into German law by air pollution control regulation TA-Luft. For its refineries and petrochemical plants, BP required exchange or modification of the existing equipment.

Bureau Veritas in Germany provides the control of VOC Fugitive Emissions for the refineries and petrochemical units of the Gelsenkirchen site with a structured measurement campaign for approximately 600.000 points.

Extended services has been offered: RFID Tagging, GPS coordinates, SAP interface.

A 56 persons Team has been built to meet very short deadlines.

Fugitive Emissions

9www.bureauveritas.pl

Appendix – Case Studies (2)

Bureau Veritas provided Site Inspection services to Grupa Lotos SA for its Programme 10+ in Gdansk Refinery. The project includes site inspection in .Grupa Lotos SA decided to use external inspection body to perform inspections on site which is now recognised by many international operators as the best practice within the oil industry.

Bureau Verita performed its services on three (3) instalation:

1. Amin-Sulphure complex installation

2. Installation of processing heavy vacuum residue - ROSE3. Mild hydrocracking installation - MHC

The scope of the job covered inspection in all major engineering branches like civil, water&sewage, electrical, mechanical, instrumentation, painting and insulation.

Site Inspection

Bureau Veritas Poland is providing from 2011 to Gaz-System SA a strategic mission for Shop Inspection services on pipes in pipe mills and on site. The pipes are dedicated for new gas pipelines developed by Gaz-System SA.

Due to the innovative nature and volume of the project Gaz-System has decided to involve Bureau Veritas as inspection body for inspection services in pipes mills and on site. It’s first time in Poland that investor decided to involve inspection body for such kind of inspection.

The scope of IVB covers:- Inspection in pipe mills- Inspection on site- Issue 3.2 certificate according

to EN 10204- take over the pipes by gas pipeline contractor

Shop Inspection