P/1
Burlington
ivory
Burlington Ivory 15x90 / 6”x36”
Burlington Ivory 15x90 / 6”x36”
Burlington Ivory 15x90 / 6”x36”
Burlington Ivory 15x90 / 6”x36”
Burlington Ivory 15x90 / 6”x36”
sand
Burlington Sand 15x90 / 6”x36”
Burlington Sand 15x90 / 6”x36”
Burlington Sand 15x90 / 6”x36”
Grey
Burlington Grey 15x90 / 6”x36”
BurlinGtOn iVOrYtechnOlOGY pORCELLaNaTO DIGITaL hD aD IMpaSTO COLORaTO - hD DIGITaL COLORED BODY pORCELaINFinish NaTURaLE/RETTIFICaTO - NaTURaL/RECTIFIEDthicKness 10mm 3/8”
9
10
10
1,215
0,90
27,00
20,00
15,25
36 43,74 972,00 10mm 3/8”
10mm 3/8”
10mm 3/8”
pcs m2 kg/box Box/pal m2/pal kg/pal thickness
Mosaic
Skirting
4100004Mosaic Ivory 30x30 12”x12”
Battiscopa Skirting7,5x90 3”x36”
4100001 Burlington Ivory 15x90 6”x36”
Burlington
Field Tile
4100007
4100005Mosaic Sand 30x30 12”x12”
4100002 Burlington Sand 15x90 6”x36”
Battiscopa Skirting7,5x90 3”x36”
BurlinGtOn sandtechnOlOGY pORCELLaNaTO DIGITaL hD aD IMpaSTO COLORaTO - hD DIGITaL COLORED BODY pORCELaINFinish NaTURaLE/RETTIFICaTO - NaTURaL/RECTIFIEDthicKness 10mm 3/8”
9
10
10
1,215 27,00
20,00
15,25
36 43,74 972,00 10mm 3/8”
10mm 3/8”
10mm 3/8”
pcs m2 kg/box Box/pal m2/pal kg/pal thickness
Mosaic
Skirting
Burlington
Field Tile
4100008
0,90
4100006Mosaic Grey 30x30 12”x12”
4100003Burlington Grey 15x90 6”x36”
Battiscopa Skirting7,5x90 3”x36”
BurlinGtOn GreYtechnOlOGY pORCELLaNaTO DIGITaL hD aD IMpaSTO COLORaTO - hD DIGITaL COLORED BODY pORCELaINFinish NaTURaLE/RETTIFICaTO - NaTURaL/RECTIFIEDthicKness 10mm 3/8”
9
10
10
1,215 27,00
20,00
15,25
36 43,74 972,00 10mm 3/8”
10mm 3/8”
10mm 3/8”
pcs m2 kg/box Box/pal m2/pal kg/pal thickness
Mosaic
Skirting
Burlington
Field Tile
4100009
0,90
schemi di POsalaYinG sYstems
indicaziOni e schemi di POsa
per Ottenere il miglior risultato estetico è fondamentale prima della posa stendere a terra almeno 4 mq di pro-dotto e verificare la distribuzione dell’effetto cromatico.Casigliamo una fuga di 2mm e stucco in tono al prodotto.
Nel caso si scelga la posa “a correre” si consiglia di sfalsare il lato più lungo per un massimo di 30cm sulla lunghezza del pezzo.
installatiOn laYOut and instructiOns
To guarantee an end result as attractive as possible, it is essential to first spread out at least 4 metres of the product on the floor to check the colour effect.For better aesthetic results, joints of 2mm and use coloured grouts to match the tiles.
When the product is installed in a “staggered” pattern, any 36” (90cm) side should never exceed the 1/3 of the 36” (90cm) saie of the pieces next to them.
*
*
*
*
“cOuld” tOnes Blend50% Grey50% Ivory
“Warm” tOnes Blend 70% Sand30% Ivory
miscelaziOni di cOlOri alternatiVealternatiVe cOlOr “Blends”
nOrma standard
isO 10545/2
isO 10545/3
isO 10545/14
isO 10545/9
isO 10545/12
isO 10545/13
isO 10545/4
isO 10545/7
din 51130
caratteristicheFEaturEs
DIMENSIONI - SIZElunghezza e larghezza - length and widthspessore - thicknessrettilineità degli spigoli - straigthness of edgesortogonalità - wedgingplanarità - flatness
assorbimento d’acquawater absorption
resistenza alle macchie stain resistance
resistenza agli sbalzi termicithermal shock
resistenza al gelofrost/freeze resistance
resistenza agli attacchi chimicichemical resistance
resistenza alla flessionebreaking strength
resistenza all’abrasionevisible abrasion resistance
scivolositàanti-slip
± 0,6 %± 5 %± 0,5 %± 0,6 %± 0,5 %
‹0,5 %
≥ cLaSSE 3
R10
nessuna alterazione visibileno visible alteration
nessuna alterazione visibileno visible alteration
nessuna alterazione visibileno visible alteration
≥ 35 N/ mm2 45 N/ mm2
pEI V
± 0,6 %± 5 %± 0,5 %± 0,6 %± 0,5 %
0,3 %
5
resisteresistant
resisteresistant
resisteresistant
ValOre PrescrittO Value required
Burlington
P/47
nOrma standard
isO 10545/2
caratteristicheFEaturEs
DIMENSIONI - SIZElunghezza e larghezza - length and widthspessore - thicknessrettilineità degli spigoli - straigthness of edgesortogonalità - wedgingplanarità - flatness
± 0,6 %± 5 %± 0,5 %± 0,6 %± 0,5 %
± 0,6 %± 5 %± 0,5 %± 0,6 %± 0,5 %
ValOre PrescrittO Value required
Burlington
dcOf
astm c1028
astm c1027
astm c373
astm c1378
ansi a137.1
din 51130
astm c484
astm c1026
astm c650
dynamic coefficient of friction
thermal shock
water absorption
stain resistance
aesthetic classes
scivolositàanti-slip
frost/freeze resistance
chemical resistance
static coefficient of friction
visible abrasion resistance
≥ cLaSSE 3
V0-V4
R10
› 0,42
› 0,60
0,69
DRY 0,80WET 0,75
cLaSS V
‹0,5 %
unaffected
unaffected
unaffected
unaffected
unaffected
5
V3
0,3 %