siemens.com/processinstrumentation/oem To provide the operator with feedback about the status of the com- bustion system, you need a reliable, technically advanced burner management control system. Without a reliable burner management system, your plant is losing pro- ductivity and profit. With a BMS you increase the burner´s efficiency and reduce greenhouse gas emissions. Furthermore you minimize unstable and dangerous situations. Siemens offers a complete line of reliable and safe instruments for measuring your combustion processing including pressure, temperature, flow, level and positioners. All instruments include advanced diagnostics that can be coupled with PCS7 as part of your asset management and preventative maintenance solution. Burner Management System Reduce cost and improve safety Reliable combustion control instrumentation Process Instrumentation Process Instrumentation
Transcript
siemens.com/processinstrumentation/oem
To provide the operator with feedback about the status of the com-bustion system, you need a reliable, technically advanced burner management control system.
Without a reliable burner management system, your plant is losing pro-ductivity and profit. With a BMS you increase the burner´s efficiency and reduce greenhouse gas emissions. Furthermore you minimize unstable and dangerous situations.
Siemens offers a complete line of reliable and safe instruments for measuring your combustion processing including pressure, temperature, flow, level and positioners. All instruments include advanced diagnostics that can be coupled with PCS7 as part of your asset management and preventative maintenance solution.
Burner Management SystemReduce cost and improve safety Reliable combustion control instrumentation
Siemens AGProcess Industries and DrivesProcess AutomationProcess Instrumentation
76181 KarlsruheGERMANY
The information provided in this Flyer contains des-criptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective features shall only exist if expressly agreed in the terms of contract.Availability and technical specifications are subject to change without prior notice.All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.
SIPART PS2 – Electropneumatic positioner
Stroke/Rotary range 3 to 200 mm (0.12 to 5.12 inch) -> larger strokes available on request 30° to 100°
Housing material Makrolon®, aluminum, stainless steel
Ambient temperature -40 to 80 °C (-22 to 176 °F)
Benefits: • Extensive diagnostic functions as standard• Negligible air consumption in stationary operation• High-grade control quality
SITRANS P DS III – Digital pressure transmitter
Measuring range Gauge pressure: 0 to 250 mbar … 0 to 700 bar Absolute pressure (GP design): 0 to 250 mbar a … 0 to 30 bar a Absolute pressure (DP design): 0 to 250 mbar a … 0 to 100 bar a Differential pressure: 0 to 20 mbar … 0 to 30 bar
Accuracy ≤ 0.065 %
Process temperature -40 to 100 °C (-40 to 212 °F)
Benefits: • Good long-term stability and minimum conformity error• Extensive diagnosis and simulation functions• Local display and local programming with push buttons, accessible without opening the enclosure
SITRANS TS500 with SITRANS TH100 – Temperature sensor and transmitter
Wetted parts material Stainless steel 316L (1.4404) or 316Ti (1.4571)
Sensor accuracy Class AA, A, B, 1,2
Process temperature -196 to 1100 °C (-321 to 2012 °F)
Benefits: • Constructive design according to the official international recommendations• Industry standard process connections• Measuring insert interchangeable
Siemens plant-wide future-proof automation, based on drives technology and industrial software and services, will enable your machine or plant to exploit all possible potential for optimization.Besides instrumentation we offer further suitable products to complete your application needs.
Optimized operator control and monitoring systems using open and standar-dized interfaces
SIMATIC HMI
Distributed I/Os - in cabinets / at the machine or hazardous areas with seamless integration
SIMATIC I/O Systems
Increased engineering, efficient plant operation & cost-efficiency in one DCS
