Date post: | 23-Dec-2015 |
Category: |
Documents |
Upload: | brice-ward |
View: | 218 times |
Download: | 3 times |
Business Enabled Communications
Hotel Features
Contents• Hotel General Info
• PMS & Fidelio
• Hotel Service Type
• Multiple Front Desk
• Check In
• Check Out
• Call Barring
• Bath Alarm
• Fee For Part Time
• Register Bar & Mini-Bar
• Room Rate
Hotel General Info
SMDA1 - 6022(Tx), 6024(Rx)SMDA2 - 6023(Tx), 6025(Rx)
PMS / Fidelio Usage
Fiedelio Server Info.
Default Check-In Attribute
Default Check-Out Attribute
PMS Interface
PC software supporting PMS features can be interfaced to the system, with minor Server/Clinet Logical Connection : SMDA(LAN1) – 6022(Tx), 6024(Rx) / SMDA(LAN2) – 6023(Tx), 6025 (Rx)
PMS (Proprietary Management System
TCP/IP
PMS HOST
TCP/IP
단말기
Guest Station
Service Station
Front Desk
iPECS-MG
• PMS Feature Code1.0x20 Check In2.0x21 Check Out3.0x22 WakeUp4.0x23 WakeUp Result Report5.0x24 Maid Status6.0x25 Room CutOff7.0x26 Mini Bar8.0x27 DND9.0x28 Message Wait10.0x29 Room Swapping11.0x2A Guest Info Display Request12.0x2C Guest Info Change Service13.0x2D ICM Call Enable / Disable Service14.0x2E Register Prepaid Money Service15.0x2F Call Charge Rate Service16.0x30 Check Out with Payment17.0x31 Room Charge Report18.0x32 Display Bar Charge for Room19.0x33 Display Mini-Bar Charge for Room20.0x34 Register Mini-Bar Charge21.0x35 Print SMDR with Station Range22.0x36 Guest Name Change Service
FIDELIO Interface
iPECS-MG Supports interface with Micros-Fidelio Opera, one of hotel management systems. System interoperations between iPECS-MG and Opera are using FIAS (Fidelio Interface Application Specification) and connection is possible with Fidelio server ip and port configurations.
Fidelio
FIDELIO Hotel Feature
Feature Category Specific Features
Guest Data
Check In
Check Out
Room Change
Guest Info/Name Change
Room DataRoom Status: Inspect, Clean, Dirty
Voice Mail Notification
Charge Posting
Call Charge Posting : Classification of local call, long distance call, international call, and mobile call
Mini-Bar Charge Posting
PGM 500
Fidelio Hotel Feature
Each extension of iPECS-MG is assigned its own hotel service type, and typical features and services are provided depending on the allocated hotel service type.
Office Station / Guest Station / Front Desk / Service Station.
Hotel Service Type
- One station can have only one hotel service type. - It is impossible to have a station that is a front desk and also a service station.
PGM 502
Supports only office features, but do not support hotel features(check-in, check-out, maid status and etc). But all the basic telephony services are available.
Office Station
Hotel Service Type
- The default hotel service type in iPECS-MG system.- The calls from office stations to hotel stations (guest station, front desk, and service station) can be allowed or denied.(Refer to the picture)
PGM 501PGM 501
PGM 501
A terminal in a hotel guest room. Hotel-specific features are available. - room monitor - maid status - etc All the basic telephony services are available. - DN (Directory Number) - system features (Transfer, Forward, Speed Dial, VM features) - CO features (DID, DISA)
Guest Station
Hotel Service Type
- Default station name : ROOM- The calls from guest stations to office stations can be allowed or denied.
Hotel Service Type
Front Station A terminal that can be used in hotel front desk. - check-in/check-out - guest info setting - display - room swapping - etc Front desk can provide hotel services to the hotel guests and service stations
- No limit on the number of front desks.- The attendant can be programmed to be a front desk.- Default station name : FRONT- The calls from front desks to office stations can be allowed or denied.
PGM 501
Hotel Service Type
Front StationProgram menu
A terminal for some shops or restaurants in hotel. Bar charge can be entered in service station. In this case, bar items should be registered first as bar product’s name.
Hotel Service Type
- Service station guest station : No call limitation. - Default station name : SVC STATION - At hotel service station, a guest can make an outgoing CO call by using ‘Walking COS’ feature or by using One-Time-CO-Call Enable Feature.- The calls from service stations to office stations can be allowed or denied.
PGM 501
Service Station
Multiple front desks can be activated. A station becomes a front desk if it is assigned a hotel service type as front desk.
Multiple Front Desk
- No limit on the number of front desks.- The attendant can be programmed to be a front desk. In this case, calls between office stations and front desks should be enabled.- Only the latest update will be effective, if multiple front desks program the same settings.
Description
Check-In / Modify Check-In Information
This feature allows the operator to check-in and change check-in information of rooms.
When Guest do Check-In, basic information can be set together. The brace is Default Value.
1) Guest Name (Not Registered)
2) VIP Setting (NO VIP)
3) Room COS (DAY:1 / NIGHT:1 / TIMED:1) DAY/NIGHT/TIMED
4) Digit Conversion Table (1)
5) LCD Language (ENGLISH)
6) Voice Prompt (1)
7) PMG Group (0)
8) Check-Out Schedule (Not Registered)
Operation
Check-In / Modify Check-In Information
1. Select “CI” button to check-in or guest check in information modification and press check-in button.
2. Fill this form or modify room information and press “save” button.
Check-In button
Description
Check-Out
This feature allows the operator to check-out a guest room.
When Check-Out is done by operator, Maid status of the room is automatically changed to "DIRTY ( To be cleaned )". And followings items are automatically cleared in preparation for the next guest:
Clear Fields
Message Waiting / Guest Name / DND / Wake-Up Time / Call Forward Status /
Authorization Code / Maid Status / Station COS / Prepaid Money/ Call charge rate
Set Fields
ICM Disable / LCD language (go to system attendant's language) /
...
Operation
Check-Out
1. Select “CO” button to check-out
2. To print out receipt press “Receipt” button.
Check-out button
The use of CO lines from guest stations can be allowed or denied (by Front Desk or PMS).
Call Barring
CO Call Barring (Room Cut)
• Operation1.PGM + “#31”.2.Station number or a Station number range with “*”.3.Designate whether to use trunk call. (0 : Allow, 1 : Deny)
• Condition1.Upon check-in, room cut off is disabled automatically. 2.Upon check-out, room cut off is enabled automatically.
PGM 502
By the front desk PMS group 0 : Check ICM Call Barring. PMS group X : No call limitation to the same group.(X is group no.) Different PMS groups : Check ICM Call Barring.Guest rooms Service Station, Front Desk, Hotel Attendant : No call limitation.
Call Barring
ICM Call Barring
• Operation1.PGM + “#32”.2.Station number or a Station number range with “*”.3.Designate whether to use trunk call. (0 : Allow, 1 : Deny)
• Condition1.Service station service stations, front desks and attendants : No call limitation. 2.Front desk guest stations, service stations, front desk and attendants : No call limitation.3.Hotel attendant guest stations, service stations, front desks, attendants : No call limitation.
Call Barring
ExtensionType
Guest Station
ServiceStation
FrontDesk
AttendantOffice
Extension
ICM CallNot Allowed
ICM CallAllowed
SameGroup
DifferentGroup
SameGroup
DifferentGroup
Guest Stn. O X O O O O O Option
Service Stn. O O O O Option
Front Desk O O O O Option
Attendant O O O O O
Office Ext. Option Option Option O O
PGM 502
Call Restriction Relation
Note) O: Call is permitted X: Call is not permitted Option: If a call option of Hotel Normal Information is set to be ‘permitted’, a call is possible.
Call Barring
One-Time CO Call Use
• Operation1.PGM + “#33”2.Calling Station number + * + Charged Station number
• Condition1.Charged station must be a checked-in room station.2.At the end of CO call, the station cannot access CO line.
1. Request
2. One-Time CO enable
3. External Call
4. Charge
Guest Room
Front Desk
Intercom onlyStation
Bath Alarm
Bath Alarm Station lifts handset and no other action is taken for pre-defined time Alarm Ring and LCD Indication is presented to System Attendant. Reset Bath Alarm Ring - by dialing Alarm Reset Code(#10) at System Attendant - if alarm condition is cleared
PGM 113
PGM 113
Bath Alarm
PGM 290
Pre-defined Time for Bath Alarm
Bath Alarm
Fee For Part Time
Operation (PGM503 and PGM507)
When check-in / check-out are occurred in same day, part time fee may be charged according to room type of checked in room or hotel policy.
Description
If guest stays for 2 hours for ‘SINGLE’ room then 4000 (40 % of 10000) will be charged for the room. But guest stays for 5 hours then 10000 (100%) will be charged because ‘SINGLE’ room ( = room class 1) doesn’t define part time for 5 hours.
Bar/Mini-Bar Charge
Guest should pay for charge at service station or mini-bar when check-out.
Mini-bar charge of each room is registered by system attendant (Front desk service station) and service station and guest room. Registered Bar or Mini-bar Charge is stored in BAR record in system and will be displayed or printed in time of Hotel Charge Display or check-out.
Description
Operation1. Register Bar Item (PGM505) 2. Charge Bar Fee to Guest Room
FRONT DESK
[PGM] + #84 + (Guest Room No.) + [SAVE] + (Bar Item Index) + (Bar Cost) + (#) + [SAVE]
Service Station
{Mini-Bar Register Feature Code} + (Guest Room No.) + [SAVE] + (Bar Item Index) + (Bar Cost) + (#) + [SAVE]
Service Station
{Mini-Bar Register Feature Code} + (Bar Item Index) + (Bar Cost) + (#) + [SAVE]
‘#’ means minus cost.: Minus cost will help you when you might charge by mistake. Minus cost must be lower than total bar cost.
Room Rate Register
DescriptionRoom rates vary according to the room type (or class). There are 20 room classes
in iPECS-MG system. Each room class defines ‘room type name’ , ‘room cost’ and ‘5 part time indexes’.
Operation (PGM503 or PGM#81)
Room Rate Assign
Room rate information is included in the total room charge bill.One of 20 different room rates is assigned to individual rooms.This assigning is possible at three different places. : [Hotel Station Attribute (PGM502)], [ Check-In] and [Modify]
PGM502-F11 or PGM#82
Room Rate Assign – [Check-In], [Modify]
[Check-In]
[Modify]